LTech T1 2.4G LED touch controller Owner's Manual

Ltech T3 is a multifunctional RGB Remote Controller that offers a wide range of features and capabilities for controlling RGB lighting systems. With its advanced design and user-friendly interface, the Ltech T3 provides precise control over color, brightness, and effects, making it an ideal choice for both professional and home users. Whether you're looking to create vibrant lighting displays or enhance the ambiance of your living space, the Ltech T3 is the perfect tool to bring your lighting visions to life.

PDF

Document

T Series LED Remote Controller

( This manual applies to: T1/T2/T2M/T3/T3M/T3X )

T1 T2 T2M T3 T3M T3X

Dimming

(8 zones)

Color Temperature Color Temperature

(8 zones)

RGB Sync Control RGB Zone Control

(10 zones)

RGB Programmable

Index

General Information ……………………………………………

T1 (Dimming) ………………………………………………………

T2 (Color Temperature) ……………………………………………

T2M (Color Temperature)

…………………………………………

T3 (RGB)

……………………………………………………………

T3M (RGB )

…………………………………………………………

T3X (RGB)

…………………………………………………………

After Service

…………………………………………………………

Reset and Edit the Frequency Point

……………………………

1~5

— 1 —

General Information

A Notice for the Remote Charging:

When charging, please connect USB cable.

No memory effect in the lithium battery of remote control. Follow

the standard charging procedure even for the first three times, no

need over charge.

For T1

4. Indicator light flickers meaning low battery and need to be charged.

(red light for T2/T2M/T3/T3M/T3X, white light for T1)

Charging in low battery will affect the life of battery.

For T1, the white indicator light flickers while charging, and turns lasting light means the charging is completed.

For T1 For T2/T2M/T3/T3M/T3X

Charging Completed

For T2/T2M/T3/T3M/T3X

Fo r T 2 / T 2 M / T 3 / T 3 M / T 3 X , the blue indicator light flickers while charging, and turns green means the charging is completed.

LED indicator (White) flickers means low battery.

LED indicator (Red) flickers means low battery.

Charging Completed

The remote can be chargeable even at the OFF state, on which the indicator light is dark.

— 2 —

5. The remote should be full charged and stored at a ventilated and dry place when long time no use, and please full recharge every

3 months.

B Technical Specs:

T1/T2/T2M/T3/T3M/T3X Remote Control

Charging Voltage:

Working Current:

Working Frequency:

<30mA

2.4GHz

RF Remote Distance: 30m

Battery Capacity:

Dimensions:

Package Size:

1000mAh

L145×W55×H22(mm)

L168×W96×H34(mm)

Weight (G.W.): 230g

145

T1/T2/T2M/T3/T3M/T3X

Remote Holder

— 3 —

T3-CV Receiving Controller

Compatible Remote:

Input Voltage:

Wireless Signal:

Max Current Load:

Max Output Power:

Working Temp.:

Dimensions:

Package Size:

Weight (G.W.):

T1/T2/T2M/T3/T3M/T3X

5 ～ 24Vdc

2.4GHz

6A × 3CH Max 18A

90W/216W/432W(5V/12V/24V)

-30 ℃ ～ 55 ℃

L175×W44×H30(mm)

L178×W48×H33(mm)

140g

175

General Information

170

T3-CV

T3-CC Receiving Controller (Current 3 in 1)

Compatible Remote:

Wireless Signal:

Input Voltage:

Output Voltage:

Output Current:

Output Power:

Working Temp.:

Dimensions:

Package Size:

Weight (G.W.):

T1/T2/T2M/T3/T3M/T3X

2.4GHz

12 ～ 48Vdc

3-46Vdc

CC 350/700/1050mA × 3CH

1.05W

～ 48 .

3W × 3CH Max 144.9W

-30 ℃ ～ 55 ℃

L175×W44×H30(mm)

L178×W48×H33(mm)

150g

175

170

T3-CC

— 4 —

General Information

T3-5A Receiving Controller

Compatible Remote Control:

Wireless Signal:

Input Voltage:

Max Current Load:

Max Output Power:

Working Temp.:

Dimensions:

Package Size:

Weight (G.W.):

T3/T3M/T3X

2.4GHz

12 ～ 24Vdc

5A x 3CH Max 15A

180W/360W(12V/24V)

-30 ℃ ～ 55 ℃

L211×W40×H30(mm)

L215×W43×H33(mm)

165g

211

203

T3-5A

General Information

C Terminal of Receivers:

Running Light

Remote ID

Learning Button

5 ~ 24V dc

Power Input

Socket

CV CONTROLLER

T3-CV

LED Lamp

Connected Socket

LED Lamp

Connected Socket

Running Light

Remote ID

Learning Button

12 ~ dc

Power Input

Socket

Current

Selection Switch

Operation Table

CC CONTROLLER

T3-CC

— 5 —

12 ~ 24V Power Input Socket

CV CONTROLLER

LED Lamp Connected Socket

T3-5A

On/Off

Pause

Key

Mode

Keys

T3-5A

Speed

Keys

Brightness

Keys

T3-5A T3-CV T3-CC

T1

LED Dimming Controller

LED Dimming Controller (8 Zones)

1. Operation Panel and Component Instruction:

Touch Color Circle

Sync Status

Indicator Light

Brightness

Shortcut Keys

Brightness Keys

Zone Selection Keys

M1 M2

Scene mode Keys

(Press for 3s to save the scene mode in the 8 current zone control.)

On/Off

T1 remote works with T3-CV, T3-CC receiver.

T1 can realize the signal sync on multiple receivers, zone controlled arbitrarily (no more than 8 zones) within effective distance, a very good solution for the LED project needs sync/zone control wirelessly.

Zone Control Instruction :

● Select one of the zone: press any key of “1-8" on the remote.

● Select zone control arbitrarily: press" + any number + ", eg: take 456 as a zone, should press " 456 ".

Can RF remote the functions of dimming, quick brightness selection and DIY and so on. User-friendly color wheel for brightness adjustment, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote control.

— 6 —

● All choose (8 zones): press " " twice.

● When a zone is under inactive state, press the corresponding zone

No. to light up that zone.

Buzzer on/off: Press “Zone Selection Key” for 3 seconds.

LED Dimming Controller (8 Zones)

2. The Learning ID Method of Remote:

Learning ID:

A. Turn on the receiver and remote.

B. Short press " ID learning button " on the T3 CC / T3 CV receiver , the running light keeps on, then long press any “1-8" “zone-selection key” on the T1 remote, the running light returns to flash (the buzzer long beep, the indicator light flashes 3 times), activated successful.

If installing multiple receivers in one zone, repeat the above steps, choose the same zone key when ID learning.

Canceling ID:

A. Turn on the receiver and remote.

B. Press “ID learning button” on the T3 CC / T3 CV receiver more

than 8s, the buzzer beep twice, delete all the learned remote.

T1 remote works with T3-CV, T3-CC receiver.

— 7 —

LED Dimming Controller (8 Zones)

3. System Diagram:

Unlimited receivers can be installed in per zone within the effective distance, no wiring needed between the receivers, the installed quantity of LED receivers in per zone can be increased or decreased at any time based on the actual requirements. If you want to increase or decrease the receivers, just activate or cancel the control ID on the remote control will be fine, no any changes and effects on other receivers.

zo ne

8 zo ne 1 zo ne

2 zo ne

4 zo ne

1 zo ne

2 zon e3 zone4 zone1 zone2 zone

3 zon e4 zo ne

1 zo ne

6 ne zo

5 ne zo

Centralized Zone-division

4 zo ne

1 ne zo

4 ne zo e3 zon e2 zon e1 zon e4 zon

Spacing Zone-division e3 zon e2 zon

1 ne zo

— 8 —

4. Wiring Diagram:

5~24Vdc 5~24Vdc 5~24Vdc 12~48Vdc

……

12~48Vdc

……

LED Dimming Controller (8 Zones)

12~48Vdc

350mA 350mA 350mA 700mA 700mA 700mA 1050mA 1050mA 1050mA

Round LED

Panel Light

— 9 —

LED Panel Light LED Panel Light

T2

LED Color Temperature Controller

LED Color Temperature Controllerl

1. Operation Panel and Component Instruction:

Touch Color Circle

Sync Status

Indicator Light

T2 remote works with T3-CV, T3-CC receiver.

Speed+/Speed-

CT+/CT-

Scene-mode Keys

(Press 3s to save )

CT Shortcut Keys

Delay Off Keys

BRT+/BRT-

(Keep pressing to adjust brightness continuously.)

Brightness

Shortcut Keys

T2 can realize the signal sync on unlimited receivers within effective distance, a very good solution for the LED project needs sync control wirelessly.

Can RF remote the functions of color temperature dimming, quick color temperature/brightness selection, DIY and delay off and so on.

User-friendly color wheel for color temperature adjustment, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote control. ★ Buzzer on/off: Press “Delay Off key” for 3 seconds.

— 10 —

On / Off

LED Color Temperature Controller

2. The Learning ID Method of Remote:

Learning ID:

1. Turn on the receiver and remote.

2. Short press " ID learning button " on the T3 CC / T3 CV receiver , the running light keeps on, then long press any key on the T2 remote (except “On/Off” key), the running light returns to flash (the buzzer long beep, the indicator light flashes 3 times), activated successful.

If you want to control multiple receivers synchronously, just follow the above instructions for each receiver.

T2 remote works with T3-CV, T3-CC receiver.

Canceling ID:

1. Turn on the receiver and remote.

2. Press “ID learning button” on the T3 CC / T3 CV receiver more

than 8s, the buzzer beep twice, delete all the learned remote.

— 11 —

LED Color Temperature Controllerl

3. System Diagram:

Unlimited receivers can be installed within effective distance, no wiring needed between the receivers, which can be less or more in quantity according to your need for the installation.

If you want to increase or decrease the receivers, just activate or cancel the control ID on the remote control will be fine, no any changes and effects on the other receivers.

— 12 —

No quantity limit of the receivers.

4. Wiring Diagram:

5~24Vdc 5~24Vdc 5~24Vdc 12~48Vdc 12~48Vdc

LED Color Temperature Controller

12~48Vdc

CV CV CV

……

CC CC CC

350mA 700mA 1050mA

Round LED

Panel Light

LED

Panel Light

LED

Panel Light

— 13 —

T2M

LED Color Temperature Controller

LED Color Temperature Controller (8 Zones)

1. Operation Panel and Component Instruction:

Touch Color Circle

Sync Status

Indicator Light

Speed+/Speed-

CT+/CT-

BRT+/BRT-

(Keep pressing to adjust brightness continuously.)

Zone Selection Keys

M1 M2

Scene-mode Keys

(Press for 3s to save the scene mode in the 8 current zone control.)

On / Off

T2M remote works with T3-CV, T3-CC receiver.

T2M can realize the signal sync on multiple receivers, zone controlled arbitrarily (no more than 8 zones) within effective distance, a very good ●

Zone Control Instruction :

Select one of the zone: press any key of “1-8" on the remote.

solution for the LED project needs sync/zone control wirelessly.

Can RF remote the functions of color temperature touch adjustment,

● Select zone control arbitrarily: press" + any number + ", eg: take 456 as a zone, should press " 456 ".

●

All choose(8 zones): press " " twice. brightness adjustment, and DIY scene modes. User-friendly color wheel for color temperature adjustment, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote control.

●

★

— 14 —

When a zone is under inactive state, press the corresponding zone

No. to light up that zone.

Buzzer on/off: Press “Zone Selection Key” for 3 seconds.

LED Color Temperature Controller (8 Zones)

2. The Learning ID Method of Remote:

Learning ID:

Turn on the receiver and remote.

Short press " ID learning button " on the T3 CC / T3 CV receiver , the running light keeps on, then long press any “1-8" “zone-selection key” on the T2M remote, the running light returns to flash (the buzzer long beep, the indicator light flashes 3 times), activated successful.

Canceling ID:

A . Turn on the receiver and remote.

Press “ID learning button” on the T3 CC / T3 CV receiver more

than 8s, the buzzer beep twice, delete all the learned remote.

If installing multiple receivers in one zone, repeat the above steps, choose the same zone key when ID learning.

T2M remote works with T3-CV, T3-CC receiver.

— 15 —

3. System Diagram:

The receivers can be divided into 1~8 zones within effective distance(1pc receiver per zone), no wiring needed between the receivers.

zone 1 zone

8 zone

LED Color Temperature Controller (8 Zones)

If you don't need color temperature smooth mode by pressing the , each zone can set up unlimited receivers and achieve brightness, color temperature adjustment synchronously.

zo ne 1 zo ne

8 zo ne

2 zo

6 zone

5 zone

4 zone

— 16 —

6 ne zo

5 ne zo

Centralized Zone-division

4 ne zo

zo ne

4 zo ne

1 zo ne

2 zon e3 zone4 zone1 zone2 zone

3 zon e4 zo ne

1 ne zo

LED Color Temperature Controller (8 Zones)

4. Wiring Diagram:

5~24Vdc 5~24Vdc 12~48Vdc 12~48Vdc 12~48Vdc

……

1 ne zo

4 ne zo e3 zon e2 zon e4 zon e1 zon

Spacing Zone-division e3 zon e2 zon

1 ne zo

— 17 —

350mA 700mA 1050mA

Round LED

Panel Light

LED

Panel Light

LED

Panel Light

T3

LED RGB Controller

1. Operation Panel and Component Instruction:

Touch Full-color Circle

Speed Keys

Mode Keys

Sync Status

Indicator Light

Brightness Keys

T3 remote works with T3-CV, T3-CC, T3-5A receiver.

Pause Key

Scene-mode Keys

(Long press 3s to save)

Press"PLAY" key to play cycle modes.(merely play the dynamic effect, the static effect will be skipped automatically)

On / Off T3 can realize the signal sync on unlimited receivers within effective distance, a very good solution for the LED project needs sync control wirelessly.

Can RF remote the functions of switch, pause, changing modes, changing speed and the brightness and so on. Built-in 32 changing modes, you can save the changing modes in the shortcut key as you like, which not only can call at any time, but also can combine into a program to play in loop.

— 18 —

★ Buzzer on/off: Press “Pause key” for 3 seconds.

LED RGB Controller

2. The Learning ID Method of Remote:

T3-5A Learning ID:

A. Turn on the receiver and remote.

B. Press “on/off” on the T3-5A for 2s, there is a buzzer sound, keep

press, then press any key on the T3 (except “on/off” key) until the

indicator light flashes 3 times(the buzzer long beep at the same

time), learning ID successful, release all the keys.

T3-5A Cancelling ID:

A. Turn on the receiver and remote.

B. Press “on/off” on the T3-5A for 2s, there is a buzzer sound,

keep press, after 5s press any keys on the T3 (except “on/off”),

until the indicator light flashes 3 times, release all the keys.

T3 remote works with T3-CV, T3-CC, T3-5A receiver.

T3-CC/T3-CV Learning ID:

A. Turn on the receiver and remote.

B. Short press "ID learning button" on the T3-CC/T3-CV receiver, the running light keeps on, then long press any keys (except “on/off”) on the T3, the running light returns to flash (the buzzer long beep, the green light flashes 3 times), activated successful.

T3-CC/T3-CV Cancelling ID:

A. Turn on the receiver and remote.

B. Press “ID learning button” on the T3-CC/T3-CV receiver more

than 8s, the buzzer beep twice, delete all the learned remote .

If you need to control multiple receivers synchronously, follow the above steps for each receiver.

— 19 —

LED RGB Controller

3. Tables of Changing Mode:

No.

Mode

Static red

Static green

No.

Mode

Cyan fade out and fade in

White fade out and fade in

RGB fade out and fade in 3

Static blue

Static yellow

Static purple

Static cyan

Static white

RGB jumping

7 colors jumping

Red/Green color smooth

Red/Blue color smooth

Green/Blue color smooth

Red/Yellow color smooth

Green/Cyan color smooth

Blue/Purple color smooth

10 White strobe 26 Green/Yellow color smooth

11 7 colors strobe 27 Blue/Cyan color smooth

Red fade out and fade in 28 Red/Purple color smooth

13 Green fade out and fade in 29 Blue/White color smooth

Blue Fade out and fade in 30 Yellow/Purple/Cyan color smooth

Yellow fade out and fade in 31 RGB color smooth

Purple fade out and fade in

32 Full-color smooth

Comment: Speed/Brightness adjustable.

— 20 —

4. System Diagram:

Unlimited receivers can be installed within effective distance, no wiring needed between the receivers, if you want to increase or decrease the receivers, just activate or cancel the control ID will be fine, no any changes and effects on other receivers.

5. Wiring Diagram:

12~24Vdc 12~24Vdc 12~24Vdc 5~24Vdc 5~24Vdc 5~24Vdc

LED RGB Controller

12~48Vdc 12~48Vdc 12~48Vdc

CV CV CC

350mA 700mA 1050mA

Round LED

Panel Light

LED

Panel Light

LED

Panel Light

— 21 —

T3M

LED RGB Controller

LED RGB Controller (10 Zones)

1. Operation Panel and Component Instruction:

Touch Full-color Circle

Sync Status

Indicator Light

Speed Key

Mode Key

7 8

9 Zone Selection Keys

Brightness Key

M1 M2

Scene-mode Keys

Press for 3 seconds, can save the scene mode in the 10 current zone control

Pause Key

On / Off

T3M remote works with T3-CV, T3-CC, T3-5A receiver.

T3M can realize the signal sync on multiple receivers, zone controlled arbitrarily (no more than 10 zones) within effective distance, a very good solution for the LED project needs sync control wirelessly.

●

Zone Control Instruction :

Select one of the zone: press any key of “1-10" on the remote.

Can RF remote the functions of switch, pause, changing modes, changing speed and the brightness and so on. Satisfied with your requirement of sync control multiple zones, group control or control separately, which it is easy to use.

●

Select zone control arbitrarily: press" + any number + ", eg: take 456 as a zone, should press " 456 ".

All choose(10 zones): press " " twice.

★ Buzzer on/off: Press “Pause key” for 3 seconds.

— 22 —

LED RGB Controller (10 Zones)

2. The Learning ID Method of Remote:

T3-5A Learning ID:

A. Turn on the receiver and remote.

B. Press “on/off” on the T3-5A for 2s, there is a buzzer sound, keep press, then press any key of “1-10" zone on the T3M until the indicator light of remote flashes 3 times (the buzzer long beep at the same time), learning ID successful, release all the keys.

T3-5A Cancelling ID:

A. Turn on the receiver and remote.

B. Press “on/off” on the T3-5A for 2s, there is a buzzer sound, keep press, after 5s press any key of “1-10" zone on the T3M, until the indicator light of remote flashes 3 times, release all the keys.

T3-CC/T3-CV Learning ID:

A. Turn on the receiver and remote.

Short press "ID learning button" on the T3-CC/T3-CV receiver, the running light keeps on, then long press any key of “1-10" zone on the T3M remote, the running light returns to flash (the buzzer long beep, the green light flashes 3 times), activated successful.

T3-CC/T3-CV Cancelling ID:

A. Turn on the receiver and remote.

B. Press “ID learning button” on the T3-CC/T3-CV receiver more than 8s, the buzzer beep twice, delete all the learned remote .

T3M remote works with T3-CV, T3-CC, T3-5A receiver.

— 23 —

3. Tables of Changing Mode:

No.

Mode

3 colors jumping

2 7 colors jumping

No.

Mode

10 Green/Cyan color smooth

11 Blue/Purple color smooth

White strobe

7 colors strobe

12 Green/Yellow color smooth

13 Blue/Cyan color smooth

5 RGB fade out and fade in 14 Red/Purple color smooth

6 Red/Green color smooth 15 Blue/White color smooth

7 Red/Blue color smooth 16 Yellow/Purple/Cyan color smooth

8 Green/Blue color smooth 17 RGB color smooth

9 Red/Yellow color smooth 18 Full-color smooth

Comment: Speed/Brightness adjustable.

— 24 —

LED RGB Controller (10 Zones)

4. System Diagram:

The receivers can be divided into 1~10 zones within effective distance(1pc receiver per zone), no wiring needed between the receivers. zon e 10 zone 1 zo ne 9 zo ne

2 ne 7 zo ne 6 zo ne 5 zo ne 4 zo

5. Wiring Diagram:

12~24Vdc 12~24Vdc 12~24Vdc 5~24Vdc 5~24Vdc 5~24Vdc

LED RGB Controller (10 Zones)

12~48Vdc 12~48Vdc 12~48Vdc

CV CV CC

350mA 700mA 1050mA

Round LED

Panel Light

LED

Panel Light

LED

Panel Light

— 25 —

T3X

LED RGB Programmable Controller

1. Operation Panel and Component Instruction:

Touch Full-color Circle

Sync Status

Indicator Light

Speed Keys

Mode Keys Brightness Keys

Scene-mode Keys

(Press 3 seconds to save)

(Press"PLAY" to play cycle modes.

merely play the dynamic effect, the static effect will be skipped)

On / Off

DIY Key for Color Selection

Switch Key for

Changing Modes

T3X remote works with T3-CV, T3-CC, T3-5A receiver.

T3X can realize the signal sync on unlimited receivers within effective distance, a very good solution for the LED project needs sync control wirelessly.

Can RF remote the functions of switch, pause, mode, speed and LED brightness. More proudly, the T3X has the brand-new programmable function, only 10 seconds to DIY a new change effect.

Programming has never been so easy.

DIY Key for Color Selection

● Long press for 2 seconds to enter DIY programming function.

Select any color on , the controller will save immediately.

Press to enter next color. (can save 1-10 colors)

After color selection, press to switch jumping / smooth / flickering changing effect.

Adjust the brightness and the speed by pressing the “SPEED” and “ BRT”.

Save the new program into the “Scene-mode keys”.

●

▲

Additional Functions:

Long press ”DIY key for color selection” to clear the current color.

Press “MODE” key under DIY function, can display the standard color for black, red, green, blue, yellow, purple, cyan and white. Among them, black can be used for editing fade in dimming effect, etc.

★ Buzzer on/off: Press “Scene-mode Key” for 3 seconds.

— 26 —

LED RGB Programmable Controller

2. The Learning ID Method of Remote:

T3-5A Learning ID:

A. Turn on the receiver and remote.

B. Press “On/Off” on the T3-5A for 2s, there is a buzzer sound, keep press, then press any key on the T3X (except “On/Off” key) until the indicator light flashes 3 times(the buzzer long beep at the same time), learning ID successful, release all the keys.

T3-5A Cancelling ID:

A. Turn on the receiver and remote.

B. Press “On/Off” on the T3-5A for 2s, there is a buzzer sound, keep press, after 5s press any key on the T3X (except “On/Off”), until the indicator light flashes 3 times, release all the keys.

T3-CC/T3-CV Learning ID:

A. Turn on the receiver and remote.

B. Short press "ID learning button" on the T3-CC/T3-CV receiver, the running light keeps on, then long press any key (except “On/Off”) on the T3X remote, the running light returns to flash (the buzzer long beep, the green light flashes 3 times), activated successful.

T3-CC/T3-CV Cancelling ID:

A. Turn on the receiver and remote.

B. Press “ID learning button” on the T3-CC/T3-CV receiver more

than 8s, the buzzer beep twice, delete all the learned remote .

If you need to control multiple receivers synchronously, follow the above steps for each receiver.

T3X remote works with T3-CV, T3-CC, T3-5A receiver.

— 27 —

LED RGB Programmable Controller

3. Tables of Changing Mode:

No.

Mode

Static red

Static green

Static blue

Static yellow

Static purple

Static cyan

Static white

RGB jumping

7 colors jumping

White strobe

7 colors strobe

Red fade out and fade in

Green fade out and fade in

Blue fade out and fade in

Yellow fade out and fade in

Purple fade out and fade in

No.

Mode

Cyan fade out and fade in

White fade out and fade in

RGB fade out and fade in

Red/Green color smooth

Red/Blue color smooth

Green/Blue color smooth

Red/Yellow color smooth

Green/Cyan color smooth

Blue/Purple color smooth

Green/Yellow color smooth

Blue/Cyan color smooth

Red/Purple color smooth

Blue/White color smooth

Yellow/Purple/Cyan color smooth

RGB color smooth

Full-color smooth

Comment: Speed/Brightness adjustable.

— 28 —

4. System Diagram:

5. Wiring Diagram:

12~24Vdc 12~24Vdc 12~24Vdc 5~24Vdc 5~24Vdc 5~24Vdc

LED RGB Programmable Controller

12~48Vdc 12~48Vdc 12~48Vdc

CV CV CC

350mA 700mA 1050mA

Round LED

Panel Light

LED

Panel Light

LED

Panel Light

— 29 —

After Service

Ⅰ

. Attention:

Ⅱ

. Warranty Agreement:

A. The product shall be installed and serviced by the qualified person.

B. This product is non-waterproof. Please avoid the sun and rain.

When installed outdoors please ensure it is mounted in a water

proof enclosure.

C. Good heat dissipation will prolong the working life of the controller.

Please ensure good ventilation.

D. Please check if the output voltage of the LED power supply used

comply with the working voltage of the product.

A. We provide lifelong technical assistance with this product:

A 5-year warranty is given from the date of purchase. The warranty

is for free repair or replacement if cover manufacturing faults only.

For faults beyond the 5-year warranty, we reserve the right to charge

for time and parts.

B. Warranty exclusions below:

Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.

The product appears to have excessive physical damage.

Damage due to natural disasters and force majeure.

Warranty label, fragile label and unique barcode label have been damaged.

E. Please ensure that adequate sized cable is used from the controller

to the LED lights to carry the current. Please also ensure that the

cable is secured tightly in the connector.

F. Ensure all wire connections and polarities are correct before applying

power to avoid any damages to the LED lights.

G. If a fault occurs, please return the product to your supplier. Do not

attempt to fix this product by yourself.

The product has been replaced by a brand new product.

C. Repair or replacement as provided under this warranty is the

exclusive remedy to the customer. We shall not be liable for any

incidental or consequential damages for breach of any stipulation

in this warranty.

D. Any amendment or adjustment to this warranty must be approved

in writing by our company only.

— 30 —

★ This manual only applies to this model. We reserve the right to

make changes without prior notice.

Reset and Edit the Frequency Point

A. Reset Function :

Feature: Reset function is available when remote operates abnormally.

Operation: Long press the 2 keys on the positions of A simultaneously , release after 3 seconds, the remote will be auto off , means reset completed . and then could restart the remote.

B. Check and Edit the Frequency Point on the Remote:

Feature: a. Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user. b. Multiple remotes sync-control becomes available when they use the same frequency point.

Attn: After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.

Remotes of the same frequency point, only one remote could be used to execute the learning ID process, the rest needs to be off.

Check the Frequency Point on the Remote:

Turn on the remote, long press the key for 5 seconds until the red light ( white light for T1) flashes 3 times, and then the green light

(white light for T1 ) flashes, the numbers of the flash will be the frequency point of the remote. you can only edit the frequency point after 3 seconds.

Edit the Frequency Point on the Remote: In frequency changing state,

Method 1:

1 2

7 8 9 numbers. Then press any key or touch the color circle to exit the frequency edit state.

Method 2: Long press “on/off” key over 5 seconds, the green light (white light for T1) flashes, the flash times plus 1 means the frequency point accumulate 1. In short, long press the “on/off” key over 5 seconds each time, the frequency point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.

— 31 — Update Time:2016.01.21_A5

T Series LED Remote Controller

Applied Range

Architectural ornament: business area, airport, subway station.

Interior decoration: hotel, shopping mall, square, restaurant, pub, home furnishing, etc.

Signboard, billboard.

Anywhere else, where uses LED for dimming, color temperature and full color adjustment.

Parameters

Charing Voltage: 5Vdc (Built-in Lithium Battery)

Working Current:

≤

30mA

Working Frequency: 2.4GHz

Remote Distance: 30m

With USB Charging Port warranty

5 years

Hello! I am an AI chatbot specifically trained to assist you with the Ltech T1 Owner's manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts