Vertige - Axis AV Solutions

Vertige - Axis AV Solutions
QUICK START GUIDE
RUNNING THE SHOW
that the LOAD button next to the preset bank and navigation buttons has been selected. Next, select the
desired preset that you wish to load. The preset will be loaded to program or preview, depending on which
button has been selected. If you have loaded your preset to preview, you will need to press TAKE to view it
on the Program screens. If you load a preset directly to program, the new attributes including sources, size,
position, border, etc will cut into place.
Layer Selection
Backgrounds, frames, PIPs, and logos are all considered
layers. Layers which are selected will be highlighted on the
touchscreen. To select a layer, there are several options:
WARRANTY AND SERVICE
• Selecting Layers from the touchscreen: At any time when the Preset Page screen is open, a layer may be
selected by directly touching it on the touchscreen. Touching another layer will release your current selection
and select the new layer. To select multiple layers, or remove a layer from your selection, you will need to use
the selection modifier keys on the Vertige™ keyboard, i.e. [+] or [-].
All Analog Way products have a 3 year warranty on parts and labor, return to factory, but do not include
faults resulting from user negligence, any unauthorized modifications, electrical surges, mishandling (drop/
crush), and/or any other damage caused by misuse.
Please note: The included carrying case and protective foam is not covered under warranty.
• Selecting Layers from the Layer Selection buttons: At any time, a layer or group of layers may be selected
by directly pressing one of the Layer Selection buttons (please read the user manual for more information
on this topic).
Source selection
The source selection allows you to fill all selected layers
with a source. All sources have to be defined before
(sources and their corresponding key bindings are usually
created automatically by the Iteration Wizard).
GOING FURTHER WITH THE VERTIGE™
For complete details and operations procedures, please refer to the Vertige™ User’s manual and our
website for further information: www.analogway.com
GERMANY
GERMANY
UNITED KINGDOM
GERMANY
UNITED KINGDOM
FRANCE
FRANCE
ITALY
ITALY
UNITED KINGDOM
To save a preset, first create the content that you wish to save on either the program or preview screens. To
save a preset from Program, make sure that the Program button is selected. To save a preset from Preview,
make sure that the Preview button is selected. To save a preset, press the Save button next to the preset bank
and page navigation buttons. Then navigate to the preset slot that you wish to save to, and press once on
the desired preset button. The preset will turn yellow, indicating a successful save. If the preset slot was not
empty, press twice to overwrite.
To load a preset, first be sure that the Preview button is selected if you wish to load the preset to Preview, or
that the Program button is selected if you wish to load the preset to Program. To Load a preset, make sure
• 1 x Vertige™ (VRC300)
• 2 x Power supply cord
• 1 x User manual (PDF version)*
• 1 x Quick start guide (PDF version)*
* User manual and Quick start guide are available on www.analogway.com.
ITALY
VERTIGE™ SETTINGS
SINGAPORE
Before starting with Vertige™ please see the
following steps:
• Rear panel description
• Front panel description
• Setting up the Vertige™
• Configuring the Show
• Running the Show
SINGAPORE
SINGAPORE
GERMANY
Transition section
You have different options to transition from Preview to
Program:
- The T-Bar for a manual smooth transition
- The Take button for an automatic timed transition
- Independent faders for a manual transition per screen.
Preset selection
A Preset contains all of the layer information about all of
the layers on all of the selected screens. Presets stored
using the Vertige™ console are stored within the Vertige™
show, and can be exported and imported to another
console. By default, the unit will operate in preset Load
mode.
WHAT’S IN THE BOX
UNITED STATES
UNITED STATES
Below each fader you will find a screen button, you can use the left/right arrow to move this screen list. Each
fader will take the screen which is written on the button.
Thank you for choosing Analog Way and the Vertige™. By following these simple steps, you will be able to
setup and use your powerful high end Remote Controller within minutes. Vertige™ is a revolutionary Remote
Controller integrating new ways to create and manage large events and multi-venues. The Vertige™ brings
a simple and flexible approach to show creation and management. Vertige™ can control several screens
and devices such as Ascender 48, Ascender 32, SmartMatriX Ultra or NeXtage 16 systems, independently
or simultaneously in any kind of combination, including Soft Edge blending. Vertige™ also supports linked
LiveCore™ devices (additive modularity) and LiveCore™ Expansion modules.
FRANCE
CONTACT INFORMATION
UNITED STATES
Use the left/right arrow to navigate into the source page. Then simply press the desired source in order to fill
the selected layer(s).
Vertige™ - Ref. VRC300
UNITED KINGDOM
FRANCE
ITALY
UNITED STATES
If connecting the Vertige™ and device directly,
be sure to use an Ethernet crossover cable (the
Vertige™ connects to the controlled devices with
standard Ethernet LAN networking equipment).
Otherwise you can use a standard Ethernet hub
and straight cables.
REAR PANEL DESCRIPTION
SINGAPORE
The Americas
Europe, Middle East & Africa
Asia Pacific
Analog Way SAS - Headquarters
Tel.: +33 (0)1 81 89 08 60
Fax: +33 (0)1 57 19 04 54
2/4 rue Georges Besse
92160 Antony
FRANCE
Analog Way Inc.
Tel.: +1 212 269 1902
Fax: +1 212 269 1943
299 Broadway, Suite 1620
New York, NY 10007
USA
Sales/General information:
[email protected]
Analog Way Pte Ltd
Tel.: +65 6292 5800
Fax: +65 6292 5205
152 Beach Road
#15-03 Gateway East
SINGAPORE 189721
Sales/General information:
[email protected]
Sales/General information:
[email protected]
1. Power Supply:
Dual, redundant power supply with fuse as standard
equipment.
Technical support:
[email protected]
Tel.: +33 (0)1 81 89 08 76
Technical support:
[email protected]
Technical support:
[email protected]
2. On/Off button:
Switch on/off the device.
140154 - 07/31/2014
Firmware: V01.02.02 - VRC300-QSG
1
2
3
3. Connection panel:
Ethernet LAN adapters to control devices.
FRONT PANEL DESCRIPTION
SETTING UP THE VERTIGE™ & CONFIGURING THE SHOW
5
6
1
7
1
Configuring the Vertige™
Network
Press the SETTINGS button in
the upper-right corner
Select the NETWORK
EDITOR tab
Select the Ethernet port you
want to use
Enter the desired IP address,
subnet mask and gateway
Press Apply
2
3
4
1- Touch screen
The touch screen 15’’6 Wide displays comfortably on
the same page, the representation of the Program
& Preview but also of a typical scene (Blend + 2
satellites). It is important to have the whole scene
represented to work on multiple layers from
different screens at the same time (change of source
of background, for example). It is useful to have both
states Program/Preview shown at the same time as
the LiveCore™ series allows you to change one or the
other at any time (even during an effect).
2- Preset section
This section allows the operator to save/load its
scene presets (10 direct access presets and a page
mechanism to organize them).
3- Layer section
This section enables the operator to select a set of
layers which belong to different screens in order to
edit them simultaneously. Various criteria are used to
perform advanced combinations. It will be possible
to save those combinations for later use.
4- Source section
This section allows assigning sources to the selected
layers in Program or Preview. Twelve contextual
buttons display the name of source. The capability
to change a page allows benefiting from numerous
sources in association with the management of plugs
for the LiveCore™ series.
8
5- Control section
This section enables the operator to select which
preset to work with, and have direct access to
basic functions applied to all selected layers (Clear,
Unify...).
6- Edit section
This section allows the operator to edit the selected
layers in three different ways: roughly by the
joystick, finely by coders or directly by numpad. The
block containing the numpad is contextual and also
provides access to pages of shortcuts, tools, layer
presets (Position, Size, Border, Effect …).
7- Transition section
This section enables to use the T-Bar for transitions.
Sliders can be used like T-Bar (Effects) or like Faders
(Alpha). They are motorized in order to see the
current state of the selection.
8- Control Transition
This section allows giving a specific role to the sliders:
- In FX mode, they allow to individually mix each
screen
- In Alpha mode, where different layers of different
screens can be assigned to a slider, they will allow
to control the layer opacity (transparency).
2
Starting
the Vertige™
Press Start
Creating a User
Select the CREATE option.
Enter a name and
a password (optional)
Press Create
Logging in
Select the LOGIN option
Select a user
Press Login
3
4
Wizard Step 1
In the Device Type field,
Select the type of device you
have. Select a quantity for
this kind of devices.
Adjust each device IP address
to match your network
configuration.
Press Next
Wizard Step 2
Select a quantity of screens wired to your devices. Rename each screen if necessary. If some
of the screens will be used for a blend, adjust their size accordingly. Press CREATE
Note 1: The wizard will automatically create an assembly with its devices and streams, the
screens, the sources and the front panel key bindings.
Note 2: If your event requires creating other devices and screens, use the wizard as many
times as necessary.
Note 3: After using the wizard, you may have to adjust some default settings in the assemblies/screens/sources.
5
Creating a Show
Select the CREATE option
Enter a name
Press Create
Note: Creating a show
will automatically create
a default iteration
Loading a Show
Select the LOAD option
Select a show
Press Load
Configuring an Assembly
Select the ASSEMBLY tab
Select an assembly
Configuring the Internal Rate
Select the CONFIGURE/RATE
option.
Choose the desired mode
(Internal, Follow or Framelock).
Adjust the settings.
Configuring the Inputs
Select the CONFIGURE/
INPUT option.
Press Auto Set All to set up
automatically all the inputs
of the devices.
Configuring the Streams
Select the CONFIGURE/
STREAM option.
Make sure each "Live"
stream matches the correct
input plug.
Configuring the Screen
Mapping
Select the MAP option
Make sure each screen area
is mapped to the correct
device output.
Note: If some mappings
don’t match your wiring,
remove them and create
new ones
Configuring the Soft Edge
blending
Select the BLENDING
option.
Adjust the covering
Adjust the black levels
Adjust the blending curves
6
Loading an Iteration
Select the LOAD option
Select an iteration
Press Load
Configuring a Screen
Select the SCREEN tab
Select a screen
Configuring the Scene
Select the SCENE option.
Press Move left or Move right
to move your screen in the
scene.
7
Configuring a Source
Select the SOURCE tab
Select a source
Renaming the Source
Select the EDIT option
Enter a name
Press Apply
Note: Use a short name with
a maximum of two words to
ensure readability on LCD
buttons.
Configuring the Source key binding
Select the EDIT option
Navigate to an empty key
Press the corresponding button on the touch screen
Press Apply
8
Running the Show
Select the PRESET tab
Enjoy!
9
QUICK START GUIDE
RUNNING THE SHOW
that the LOAD button next to the preset bank and navigation buttons has been selected. Next, select the
desired preset that you wish to load. The preset will be loaded to program or preview, depending on which
button has been selected. If you have loaded your preset to preview, you will need to press TAKE to view it
on the Program screens. If you load a preset directly to program, the new attributes including sources, size,
position, border, etc will cut into place.
Layer Selection
Backgrounds, frames, PIPs, and logos are all considered
layers. Layers which are selected will be highlighted on the
touchscreen. To select a layer, there are several options:
WARRANTY AND SERVICE
• Selecting Layers from the touchscreen: At any time when the Preset Page screen is open, a layer may be
selected by directly touching it on the touchscreen. Touching another layer will release your current selection
and select the new layer. To select multiple layers, or remove a layer from your selection, you will need to use
the selection modifier keys on the Vertige™ keyboard, i.e. [+] or [-].
All Analog Way products have a 3 year warranty on parts and labor, return to factory, but do not include
faults resulting from user negligence, any unauthorized modifications, electrical surges, mishandling (drop/
crush), and/or any other damage caused by misuse.
Please note: The included carrying case and protective foam is not covered under warranty.
• Selecting Layers from the Layer Selection buttons: At any time, a layer or group of layers may be selected
by directly pressing one of the Layer Selection buttons (please read the user manual for more information
on this topic).
Source selection
The source selection allows you to fill all selected layers
with a source. All sources have to be defined before
(sources and their corresponding key bindings are usually
created automatically by the Iteration Wizard).
GOING FURTHER WITH THE VERTIGE™
For complete details and operations procedures, please refer to the Vertige™ User’s manual and our
website for further information: www.analogway.com
GERMANY
GERMANY
UNITED KINGDOM
GERMANY
UNITED KINGDOM
FRANCE
FRANCE
ITALY
ITALY
UNITED KINGDOM
To save a preset, first create the content that you wish to save on either the program or preview screens. To
save a preset from Program, make sure that the Program button is selected. To save a preset from Preview,
make sure that the Preview button is selected. To save a preset, press the Save button next to the preset bank
and page navigation buttons. Then navigate to the preset slot that you wish to save to, and press once on
the desired preset button. The preset will turn yellow, indicating a successful save. If the preset slot was not
empty, press twice to overwrite.
To load a preset, first be sure that the Preview button is selected if you wish to load the preset to Preview, or
that the Program button is selected if you wish to load the preset to Program. To Load a preset, make sure
• 1 x Vertige™ (VRC300)
• 2 x Power supply cord
• 1 x User manual (PDF version)*
• 1 x Quick start guide (PDF version)*
* User manual and Quick start guide are available on www.analogway.com.
ITALY
VERTIGE™ SETTINGS
SINGAPORE
Before starting with Vertige™ please see the
following steps:
• Rear panel description
• Front panel description
• Setting up the Vertige™
• Configuring the Show
• Running the Show
SINGAPORE
SINGAPORE
GERMANY
Transition section
You have different options to transition from Preview to
Program:
- The T-Bar for a manual smooth transition
- The Take button for an automatic timed transition
- Independent faders for a manual transition per screen.
Preset selection
A Preset contains all of the layer information about all of
the layers on all of the selected screens. Presets stored
using the Vertige™ console are stored within the Vertige™
show, and can be exported and imported to another
console. By default, the unit will operate in preset Load
mode.
WHAT’S IN THE BOX
UNITED STATES
UNITED STATES
Below each fader you will find a screen button, you can use the left/right arrow to move this screen list. Each
fader will take the screen which is written on the button.
Thank you for choosing Analog Way and the Vertige™. By following these simple steps, you will be able to
setup and use your powerful high end Remote Controller within minutes. Vertige™ is a revolutionary Remote
Controller integrating new ways to create and manage large events and multi-venues. The Vertige™ brings
a simple and flexible approach to show creation and management. Vertige™ can control several screens
and devices such as Ascender 48, Ascender 32, SmartMatriX Ultra or NeXtage 16 systems, independently
or simultaneously in any kind of combination, including Soft Edge blending. Vertige™ also supports linked
LiveCore™ devices (additive modularity) and LiveCore™ Expansion modules.
FRANCE
CONTACT INFORMATION
UNITED STATES
Use the left/right arrow to navigate into the source page. Then simply press the desired source in order to fill
the selected layer(s).
Vertige™ - Ref. VRC300
UNITED KINGDOM
FRANCE
ITALY
UNITED STATES
If connecting the Vertige™ and device directly,
be sure to use an Ethernet crossover cable (the
Vertige™ connects to the controlled devices with
standard Ethernet LAN networking equipment).
Otherwise you can use a standard Ethernet hub
and straight cables.
REAR PANEL DESCRIPTION
SINGAPORE
The Americas
Europe, Middle East & Africa
Asia Pacific
Analog Way SAS - Headquarters
Tel.: +33 (0)1 81 89 08 60
Fax: +33 (0)1 57 19 04 54
2/4 rue Georges Besse
92160 Antony
FRANCE
Analog Way Inc.
Tel.: +1 212 269 1902
Fax: +1 212 269 1943
299 Broadway, Suite 1620
New York, NY 10007
USA
Sales/General information:
[email protected]
Analog Way Pte Ltd
Tel.: +65 6292 5800
Fax: +65 6292 5205
152 Beach Road
#15-03 Gateway East
SINGAPORE 189721
Sales/General information:
[email protected]
Sales/General information:
[email protected]
1. Power Supply:
Dual, redundant power supply with fuse as standard
equipment.
Technical support:
[email protected]
Tel.: +33 (0)1 81 89 08 76
Technical support:
[email protected]
Technical support:
[email protected]
2. On/Off button:
Switch on/off the device.
140154 - 07/31/2014
Firmware: V01.02.02 - VRC300-QSG
1
2
3
3. Connection panel:
Ethernet LAN adapters to control devices.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement