copper & dsl testing
www.greenlee.com
COMMUNICATIONS
GREENLEE COMMUNICATIONS OFFERS A COMPLETE LINE OF
INNOVATIVE AND INDUSTRY-LEADING TEST & MEASUREMENT
SOLUTIONS FOR THE COMMUNICATION SERVICE PROVIDER INDUSTRY.
Contents
Multi-Network Test Analyzers
Wireless Test Solution
Cable Maintenance Test Set
Cable & Service Testing
Wire & Cable Identification
Structured Wiring Testers
Buried Facility Location And Marking
Fiber Optic Test Equipment
Fiber Optic Hand Tools Fiber Optic Kits Communications Kits
Hand Tools
HDMI Tools
280
281
282
286
293
305
310
315
337
339
340
352
382
COMMUNICATIONS
NETWORK TESTING
DataScout™ 10G
CUSTOMIZABLE FOR ANY WORKGROUP
FASTER TIME TO RESULTS
• Ready to test in 25 seconds
• Unique DS0 (TIMS) to 10G Ethernet solution
• Test multiple services simultaneously
SIMPLE TO USE, FAST TO LEARN
• Touch screen tablet design
• Portrait and landscape modes
• Intuitive test configuration
• Exportable results
RUGGED & RELIABLE
• Plug & stay - No modules to lose!
• Replaces up to 8 handhelds*
• Light yet sturdy aluminum housing
• Protective non-slip boot with kickstand
DS10G-HW-B2
DESIGNED FOR:
• Service Providers
• Utilities
• Mobility
• Enterprise
Test Kits Include:
• DataScout 10G analyzer
• Universal charger with adapter blades
SPECIFICATIONS
Display & Input
7” WVGA LCD touch screen
800x600 resolution
Weight (Varies by
configuration)
Dimensions
0.91 kg (2.0 lbs) minimum
1.36 kg (3.0 lbs) maximum
10 x 6.5 x 2.2 inches (WxHxD)
254 x 165 x 56 millimeters (WxHxD)
ENVIRONMENTAL
Operating Temperature
Operating Temperature: 10°C to 55°C14°F to
131°F
Operating Humidity:
0% to 93% RH non-condensing
Storage Temperature:
-20°C to 70°C -4°F to 158°F
Battery Type:
Li Ion battery pack
Run Time:
2-8 hours (varies by test mode)
CAT. NO.
External Power:
Mains: 110-240VAC, 50-60Hz with adaptors
ETHERNET TEST OPTIONS
Enclosure:
Shell: Rugged 1.5mm extruded aluminum
Boot: Rubber with Wi-Fi® antenna storage slot
Kickstand: Powder coated steel
DS10G-SW-201
Adds dual port 1Gb Ethernet testing
DS10G-SW-110
Activates single 10G test interface
DS10G-SW-210
Adds dual port 10Gb Ethernet testing
SOFTWARE OPTIONS
CONFIGURATION OPTIONS
CAT. NO.
DS1 TEST OPTIONS
DESCRIPTION
TABLET CONTROLLER
DS10G-HW-B1
DS10G-HW-B2
Base Controller Without Datacom
Interface
Base Controller With Datacom Interface
TEST INTERFACES
DS10-HW-WIFI
Wi-Fi
DS10-HW-ETH
Dual 10/100/1000T/X & 10G Ethernet
DS10-HW-PDH1
Dual DS1
DS10-HW-PDH2
DS3 & Dual DS1
DS10-HW-P
ISDN-PRI
DS10-HW-DDS
Digital Data Services (DDS)
DS10-HW-T
Transmission Impairment Measurement
System (TIMS)
®
Wi-Fi® is a registered trademark of the Wi-Fi Alliance.
*As compared to competitive network analyzer model
Subject to change without notice.
TRUSTED
278
DESCRIPTION
SINCE
1862
DST-SW-DT1
Adds dual port T1 testing
DST-SW-N1
Adds T1 CSU/NIU emulation
DST-SW-V
Adds DS0 voice analysis
DST-SW-E
Adds Euro/Asian ISDN-PRI support
DST-SW-X
Adds DSO drop, insert & bypass
DST-SW-DCOM
Adds DATACOM DTE/DCE interface testing
DST-SW-E1
Adds E1/T1 On-The-Fly testing
DS3 TEST OPTIONS
DST-SW-H3
Adds DS3 thru-mode testing
DST-SW-D1D
Adds DS1 drop from DS3 signal
DST-SW-NX
Adds DS3 CSU/NIU emulation
TIMS TEST OPTIONS
DST-SW-PRO4
Adds 4-button frequency program
DST-SW-4
Adds 4-WIRE 100/135Ω testing
DST-SW-EM
DST-SW-DG
DST-SW-TON
Adds E&M TYPE I-V signaling, trunk, PBX and
Tie Line testing
Adds measurement of dropouts, hits,
amplitude, and phase jitter
Adds transmit of warble ID tone
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
DataScout™ 10G Product Specifications
PRODUCTIVITY APPLICATIONS
• Chrome web browser
• Google maps
• Email, notes & contacts
• PDF viewer
• Onboard user manual & videos
• Remote control/upload via LAN
802.11 WIRELESS VALIDATION
• Tests for proper 802.11 b,g,n
configuration
• Performs channel scan
• Graphical frequency/channel/power
display
• Remote control via Wi-Fi
ETHERNET VALIDATION
• Dual 10/100/1000T/X SFP
Ethernet ports
• 10 Gigabit Ethernet SFP+
• BERT
• Optical power measurement
• PING & Traceroute
• RFC-2544 with quick test validation
• Loopback, monitor and thru modes
• Easy to read graphical reports
DS3 TESTING
• Automatic self test on connection
• STS-1 signal detection
• Simultaneously test Dual T1 and DS3
DS1 TESTING
• Dual T1/E1 testing
• PRI-ISDN NT/TE emulation
• T1 to Ethernet Bridging
• DS0 Voice & Data Testing
• CSU/NIU Emulation Mode
• VT100 emulation
• Frame Relay option
SIGNALING (TIMS/DS0) TESTING
• Comprehensive VF test suite
• TIMS 2/4 wire plus wideband
• CO/PBX emulation
• Perfect replacement for Am5,
CXR-704, HP4935A
4 WIRE DDS TESTING
• CSU/DSU emulation
• 56K primary/secondary modes
• 64K clear channel mode
• Real-time received byte display
• Monitor received signal level
DATACOM TESTING
• Sync/Async & DTE/DCE modes
• V.35, RS232, RS449, RS530, X21
INTELLIGENT TIMING VERIFICATION
• Verifies network timing systems
• Combines oscilloscope, T1 test and
switch box
• Composite clock/pulse analysis
• Eliminates need for expensive
storage oscilloscope
• Test 10 T1/E1 circuits in seconds
www.greenlee.com
279
COMMUNICATIONS
NETWORK TESTING
MULTI-NETWORK TEST ANALYZERS
DataScout™ 1G
FASTER TIME TO RESULTS
• Ready to test in 15 seconds
• Efficient SLA verification
• Results can be exported for easy sharing
REDUCE TIME TO REPAIR
• All-in-one analyzer that is simple to use and fast to learn, enabling technicians to
quickly determine and resolve network issues, regardless of the source
NO MODULES REQUIRED
• Eliminates the need for multiple test modules
• Combines seven different physical layer test protocols into one complete handheld
testing solution, saving time and money
DESIGNED FOR THE TECHNICIAN
• Ruggedized for demanding environments
• Ergonomically designed to be the lightest and smallest on the market
• Long battery run time provides extended field testing
Test Kits Include:
• DataScout 1G analyzer
• Universal charger with adapter blades
• Padded storage case
• Stylus
• USB adapter
• Wi-Fi® Antenna
DS1G-BAS
SPECIFICATIONS
ENVIRONMENTAL
Interfaces
Management: LAN 10/100 Base-T
USB: Mini-USB with adapter
Headset: Mini USB connector ear bud
Wi-Fi
Display & Input
Weight
802.11 b/g/n
3.5" TFT Touch Screen LCD
1.65 lbs (0.75 kg) without battery
2.2 lbs (1 kg) with battery
3.94 x 8.27 x 1.66 inches (WxHxD)
100 x 210 x 42 millimeters (WxHxD)
Dimensions
CONFIGURATION OPTIONS
Operating Humidity
Storage
Battery
External Power
5% to 90% non condensing
-10°C to 70°C
Type: Li Ion battery pack, 7.4V, 4800mAh
Run Time: 7-10 hours typical (varies by test mode)
Mains: 110-240 VAC, 50-60 Hz
Enclosure
Ruggedized ABS with rubber shell
SOFTWARE OPTIONS
CAT. NO.
DESCRIPTION
CAT. NO.
DS1G-BAS
Ethernet Analyzer
DS1G-SW-BAS
DS1G-PDH1
DS1 analyzer (T1 or E1)
DS1G-PDH2
DS1/DS3 analyzer (T3/T1 or E3/E1)
TRUSTED
280
Operating Temperature 0°C to 50°C
SINCE
1862
DS1G-SW-ADV
DESCRIPTION
Adds single stream Ethernet tests to
DS1G-PDH1 or PDH2
Adds multiple stream Ethernet and
Y.1564 tests
DS1G-SW-WIFI
Adds Wi-Fi® analysis
DS1G-SW-VOIP
Adds VoIP analysis
DS1G-SW-IPTV
Adds IPTV analysis
DS1G-SW-E1
Adds E1 to T1 analyzer
DS1G-SW-T1
Adds T1 to E1 analyzer
DS1G-SW-DCOM
Adds DATACOM testing
DS1G-SW-CODIR
Adds Co-Directional testing
DS1G-SW-E3
Adds E3 testing to T3 analyzer
DS1G-SW-T3
Adds T3 testing to E3 analyzer
DS1G-SW-C37
IEEE C37.94 Teleprotection analysis
= REPLACEMENT PART
= NEW PRODUCT
= ACCESSORY
B
= BARE TOOL
WIRELESS TEST SOLUTION
AirScout™
TM
›› The innovative Wi-Fi test solution
ASM300
›› Determines real “Quality of Experience” in
multiple locations simultaneously
ASC300
CAT. NO.
DESCRIPTION
ASK302
Two Client Solution in Carry Case
ASK306
Six Client Solution in Carry Case
ASM300
Individual Master Controller
ASC300
Individual Client
SPECIFICATIONS
ASM Controller
ASC Client
ASK306
Environment
›› Enables whole home or small business
Wi-Fi® readiness testing in minutes
Height
1.81" (46.2 mm)
Width
5.83" (147.6 mm)
Depth
5.79" (146.8 mm)
Weight
332 g (11.7 oz)
Height
1.46" (36.83 mm)
Width
4.88" (124.46 mm)
Depth
4.88" (124.46 mm)
Weight
247 g (8.71 oz)
Height
14.6" (370 mm)
Width
11.8" (300 mm)
Depth
6.69" (170 mm)
Weight
11.7 lbs (187.2 oz)
Operating Temperature
0 to +55 ºC / 0 to +131 ºF
Storage Temperature
-20 to +65 ºC / -4 to +149 ºF
Operating Humidity
20-80% RH non condensing
Storage Humidity
10-90% RH non condensing
• Industry leading Application benchmark testing
• All 802.11 types benchmarked
• Validation testing over time increasing accuracy
• Determines, throughout the home in one survey:
• Signal strength
• Network congestion
• Signal to noise ratio
• Real throughput rates
• Application performance in each location
• Up to 30 Clients supported
• Results recorded locally and in a cloud database for
future reference
FCC
Compliance
Canada Regulatory Requirements (ICES-003)
CE Compliance
Wi-Fi® is a registered trademark of the Wi-Fi Alliance.
www.greenlee.com
281
COMMUNICATIONS
COPPER & DSL TESTING
CABLE MAINTENANCE TEST SET
Sidekick® Plus Copper and DSL Test Set
• Saves time – Easy-to-use mode selection dial and operation - minimizes
training needs and saves time on the job
• Versatile – Combines your copper qualification needs with DSL sync and
service testing in one test set
• Fully loaded – The Sidekick® Plus xDSL comes complete with all you need
to perform tests on the copper networks that support DSL services
• No modules needed – Advanced cable diagnosis and troubleshooting in a
single test set
Applications
Helps technicians diagnose and troubleshoot problems with twisted pair cable
Install, qualify, and maintain DSL services
Features
Bonded Modem With xDSL:
• Pair bonding
• ADSL2+/VDSL2+
• Vectoring
• Broadcom BCM63168
• Automated test scripts
• USB export/import of test results/profiles
• 35MHz Wideband Noise Spectrum Analysis
• 4.4MHz Loss Measurement Test
• 35MHz Impulse Noise Step
• TDR with auto bridgetap detection (zero dead zone)
1155-5005
ADSL/VDSL Modem Sync And Service Tests:
• DSL Showtime
• Bits per Tone Graph
• Signal-to-Noise Ratio Graph
• HLOG Graph
• Error Counter
• Upper Layer Testing: Ping, Trace-route, HTTP, FTP
Standard Features:
• Advanced Dual Trace Pulse TDR (Zero Dead Zone)
• Resistive Fault Locator (Detects up to 20MΩ)
• 1GΩ Leakage Test (Insulation Resistance)
• Longitudinal Balance Test
• Ground Resistance Test
• Stress Test
• AC/DC Voltage
• Resistance
• Open Meter
• Loop Current
• Circuit Loss
• Tracing Tone Generator
• Reference Tone
CAT. NO.
1155-5001
1155-5003
1155-5005
1155-5009
1155-5010
1155-5011
1155-5012
1155-5013
TRUSTED
282
SINCE
1862
UPC NO.
01316
01324
01463
01317
01318
02275
04197
03838
DESCRIPTION
Sidekick Plus Kit LCC
Sidekick Plus Kit SCC
Kit, Sk Plus, Impulse Noise, Step TDR
Sidekick Plus With Wideband
Sidekick Plus With Wideband & Adsl/Vdsl Sync LCC
Sidekick Plus With Wideband & Adsl/Vdsl Sync SCC
Sidekick Plus Pair Bonded Modem - Fully Featured
Sidekick Plus Pair Bonded Modem - Fully Featured SCC
= NEW PRODUCT
= REPLACEMENT PART
B
= ACCESSORY
= BARE TOOL
Sidekick® Plus ADSL Far-End-Device
For use with the Sidekick® Plus as a complete ADSL testing solution
1155-5001
Applications:
• Helps technicians diagnose and troubleshoot problems with twisted pairs
at the far end of the cable
• Install, qualify, and maintain ADSL services
Benefits:
• Helps qualify pairs for ADSL service with ease
• Reduces testing time and increases technician productivity
*For use with the Sidekick® Plus Models
1155-5009
Sidekick® Plus with Wideband
1155-5010
Sidekick® Plus with Wideband & ADSL/VDSL Sync LCC
1155-5011
Sidekick® Plus with Wideband & ADSL/VDSL Sync SCC
1155-5012
Sidekick® Plus Bonded Modem - Fully Featured
1155-5013
Sidekick® Plus Bonded Modem - Fully Featured
Features:
• K-Test – Far-End-Device straps the pair under test
• TDR – Far-End-Device can alternately short and open the pair to
verify the end-of-line
• Noise – Far-End-Device provides a line termination
• Loss – Far-End-Device provides single or multiple reference tones
• Longitudinal Balance – Far-End-Device provides an IEEE 455-1985
Longitudinal Balanced Termination
• Autotest – The Sidekick Plus manages the operation of the Far-End-Device
during the test sequence
• Short Pair – Verifies loop length
• Short Pair to Ground – Determines pair resistive balance
• Remote activation via Sidekick® Plus
• Ability to connect and disconnect Central Office and
Customer Premise equipment
• Supports Second Pair Testing
• Generates tones for pair ID and pair tracing
• Capability to generate tones over a range of frequencies from
POTS to ADSL
Kit Includes:
• Sidekick® ADSL Far-End Device Unit
• RJ45 to Telco clip leads
• Canvas carry case
CAT. NO.
UPC NO.
1157-5001
03958
DESCRIPTION
Sidekick® FED Kit
www.greenlee.com
283
COMMUNICATIONS
COPPER & DSL TESTING
Sidekick® T&ND
• Easy-to-read digital LCD display
• Internal Dialer for making Transmission Test connections
• Autotest – performs 22 individual tests at the touch of a button
• Determines the stressed noise susceptibility of dry and working pairs
• Measures AC/DC Volts, Leakage, resistance, and loop current
• Performs circuit loss, circuit noise (metallic noise), and power influence tests
• Built-in open meter
• Locates up to 4 load coils
• Single set up for Tip-Ring, Tip-Ground, and Ring-Ground tests
• Field replaceable test leads
• On-screen display of “LOW BATTERY” when batteries are near failure.
1144-5000
SPECIFICATIONS
Weight
Dimensions
AC Volts
DC Volts
Resistance
Leakage
Stress
CAT. NO.
1144-5000
1134-1002S
2 lbs.
10.75" X 4.25" X 2.5"
300 Vrms max.
± 300 Volts max.
1 Megohm max.
100 Megohm max.
0 to 82 dBrnC
UPC NO.
60853
60752
Opens
Loop Current
Load Coil
Circuit Loss
Power Influence
Circuit Noise
Power
0 to 60 kft.
0 to 100 mA
up to 4
+1 to -15 dB
40 to 100 dBrnC
0 to 75 dBrnC
Four AA Batteries
DESCRIPTION
Sidekick T&ND Test Set
Case
Sidekick® T&N
• Five transmission and noise tests
• Determines the stressed noise susceptibility of dry and working pairs
• Measures resistance, AC/DC volts, and capacitive kick
• Provides tone for twisted pair or crossed conductor identification
• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground
• Minimal drying effect in all ranges
• Field replaceable leads
• Softcase with adjustable strand hook
• Low battery indicator light
1137-5002
SPECIFICATIONS
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
CAT. NO.
1137-5002
1131-0202
1134-1002S
TRUSTED
284
SINCE
1862
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 300 volts DC
0 to 300 Vrms
UPC NO.
60526
60751
60752
Stress Test
Loop Current
Circuit Noise
Circuit Loss
Power Influence
Operating Temp.
Power
DESCRIPTION
Sidekick T&N
Test Leads
Case
0 to 82 dBrnC
0 to 100 mA
0 to 75 dBrnC
-15 to +1 dB
50 to 100 dBrnC
-4°F to +140°F
Four AA batteries
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Sidekick® 7B
• Determines the stressed noise susceptibility of dry and working pairs
• Measures resistance, AC/DC volts, and capacitive kick
• Provides tone for twisted pair or crossed conductor identification
• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground
• Minimal drying effect in all ranges
• Field replaceable leads
• Softcase with adjustable strand hook
• Low battery indicator light
1134-5029
SPECIFICATIONS
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
Stress Test
CAT. NO.
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω; Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
UPC NO.
1134-5029
1134-1002S
1131-0202
60525
60752
60751
DESCRIPTION
Sidekick 7B
Case
Test Leads
Sidekick® V.O.C.
• Identifies defective inside wire and jacks
• Measures resistance, AC/DC volts, quasi square wave, and pair balance
• Identifies shorts, opens, crosses and grounds
• Replaces the need for other meters
• Provides tone for twisted pair or crossed conductor identification
• Single set-up for testing Tip-Ring, Tip-Ground, and Ring-Ground with
ground connection
• Field replaceable leads
• Softcase with adjustable hook
• Low battery indicator light
SPECIFICATIONS
Dimensions
Weight
Resistance
1143-5000
Leakage
DC Voltage
AC Voltage
Stress Test
Operating Temp.
Power
CAT. NO.
1143-5000
1134-1002S
10.75 x 4.25 x 2.5 inches
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 Megohms
Rx10K: Reads 0 to 20 Megohms
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
-4°F to +140°F
Four AA batteries
UPC NO.
DESCRIPTION
60527
60752
Sidekick V.O.C.
Case
www.greenlee.com
285
COMMUNICATIONS
COPPER & DSL TESTING
CABLE & SERVICE TESTING
TM-700 Tele-Mate™ Telephone Test Set
• Complete telephone set with ringer
• Phone-to-phone intercom, compatible with other SmartIntercom™ devices
• Modular or alligator clip connection
• Amplified loudspeaker line monitor
• Headset or handset operation
• Tone and pulse dialing
• Large 10-location speed dialing memory
• Multi-memory redial
• DTMF digit detection and measurement
• Tone output mode
• Caller ID with name display
• Call waiting Caller ID
• Missed call indication
• DSL compatible, high impedance monitor and filters
• Glow-in-the-dark keypad
• Line voltage and current display
• High voltage detect and lockout
• High current detect and lockout
• Uses 2 AA/LR6 batteries (included)
• Quick release belt-clip
TM-700
A PRODUCT VIDEO IS
AVAILABLE, SCAN THIS QR
CODE OR VISIT:
www.youtube.com/GreenleeDEMO
SPECIFICATIONS
Technical Specifications
Length:
Width:
Height:
CAT NO.
UPC NO.
TM-700
00984
DESCRIPTION
TM-700 Tele-Mate™ TELEPHONE TEST SET
QTY.
1
9.25" (235 mm)
2.5" (64 mm)
3.25" (83 mm)
TM-500 Tele-Mate™ Telephone Test Set
• Luminescent (glow-in-the-dark) keypad
• Can be used safely on a DSL enabled line
• High Impedance Monitor for monitoring line without disrupting
existing traffic
• Over voltage and over current protection
• Tone and Pulse dialing for versatility on old and new phone lines
• Polarity test with LED indicator
• 32 digit last number redial and pause
• 10 number speed dial
• Adjustable volume control plus mute
•Pause
• Flash to generate a timed break recall
• Line powered, no battery needed
• Headset (included) for hands free operation
• RJ11 socket
• Quick release belt-clip
TM-500
SPECIFICATIONS
Technical Specifications
Length:
Width:
Height:
9.25" (235 mm)
2.5" (64 mm)
3.25" (83 mm)
TRUSTED
286
SINCE
1862
CAT NO.
UPC NO.
TM-500
00486
TM-500T
00494
TM-500i
00643
DESCRIPTION
Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips
(POP)
Telephone Test Set W/ ABN "Bed-Of-Nails" Croc Clips
(Boxed)
Telephone Test Set W/ Small Croc Clips (Boxed)
QTY.
1
1
1
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Nautilus Range Telephone Test Sets
PE961
• Waterproof tested to an IEC IP67 rating, these test sets are so impervious to
water they can actually withstand submersion, though they actually float
• The PE961 features our DigAlert™ over-voltage alarm and ­lock-out
function to reduce the risk of damaging or knocking out digital s­ ervice lines
• Built-in DSL Filter
• Ten-number speed dial memory (32 digits each)
• Last number redial
• Precise hook flash
• Microphone mute
• Audible and visual mode indicators
• Polarity test in any mode
• Unique quick-release belt clip
• Premium cord set with bed-of-nails and piercing pin clips
• Luminescent Keymat
CAT. NO.
PE930
PE945
PE961
PE901
PE902
UPC NO.
60487
60489
60511
60492
60493
DESCRIPTION
Telephone Test Set
Test Set with Two-Way Hands Free
Test Set with Two-Way Hands Free and DigAlert
Ground Start Cord Set
Cord Set
FEATURE
PE930
PE945
PE961
Monitor safe for data
Adjustable Ringer
Waterproof Design
Loud Speaker Listening
Two-Way Hands Free
DigAlert™ Data Lock-out
ADSL Compatible
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
www.greenlee.com
287
COMMUNICATIONS
COPPER & DSL TESTING
ToneRanger
• Direct buried fault location, it gives an exact location to the fault.
• Locates open shield and open bond faults
• Locates twisted-pair resistance faults in aerial, underground, and direct
buried cable
• Locates splits, opens and bridge taps
• Uses low voltage and does not damage cable, circuit cards, C.O. or
subscriber equipment
• Sends Pair ID tone through wet pulp and saves service outage time on
small count section throws
• Locates open shields and shield to earth faults
• Does not interfere with DSL, IPTV or digital services on adjacent lines
• NEW easy user interface
CAT. NO.
10101-50000
10101-50000
10101-51000
10101-51100
10101-51200
10101-51300
10101-51400
52042471
UPC NO.
12734
20206
20202
12733
12732
52019
–
DESCRIPTION
TF1A Kit, ToneRanger Aerial
TF1ABL Kit, ToneRanger Aerial and Buried
TF1AP Kit, ToneRanger Aerial with Pair ID
TF1AB Kit, ToneRanger Aerial with Buried Wand
TF1AL Kit, ToneRanger Aerial with Layup Stick
TF1ABLP Kit, ToneRanger with Aerial, Buried & Pair ID
Transmitter Test Cable
Throwmaster® Paragon
• Used by construction cable splicers all around the world
• Transfer telephone/broadband services during normal working hours.
• Does not interrupt important customers
• Simple to follow interface and process for successful transfer of circuits
• LED's on the cords aid in telling the user in the cut, transfer and splice
• Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services
less than 10Mb/s
• Each step is automatically tested and verifies the circuit is complete at the
end of the transfer
CAT. NO.
0529-0001
0529-0001
TRUSTED
288
SINCE
1862
UPC NO.
52901
DESCRIPTION
Throwmaster® Paragon 519 Kit
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
1155 Fault Loop Simulator
• Simulates 8 faults that can be used individually, or in a combination:
– Cross battery
– Resistive 5 kohm load to ground
– Resistive 500 ohm short
– Two balanced bridge taps
– 60 ohm series resistance fault
– 60 Hz Power Influence
– High frequency noise
• 1910 foot cable length
• Battery operated
• Rugedized case
• Convenient Test Lead connections.
• Three access locations in the span for custOm faults
• Train users on real twisted-pair faults
• Test multiple test set functions such as RFL, TDR, Power Influence, Stress,
Leakage, Resistance, impulse noise and others
• Verify results from the field in a controlled environment
• Demonstrates how noise increases with pair imbalances
• Show differences between shorts, bridge taps, series faults and opens
with a TDR
1155-7001
CAT. NO.
UPC NO.
1155-7001
57691
DESCRIPTION
Test Set
4-6-8 Modular Adapters
• Nylon-reinforced ABS plastic body.
• Easy-to-read wire layout.
• Removable/replaceable patch cord.
• Inline adapters.
• Snagless plugs.
• Belt clip.
•Notched copper contacts keep alligator clips attached during testing.
PA1902
CAT. NO.
DESCRIPTION
PA1902
PA1903
RJ45 Modular Adapter (8-way)
RJ11 Modular Adapter (6-way)
www.greenlee.com
289
COMMUNICATIONS
COPPER & DSL TESTING
TurTEL® Modular Adapters/Polarity Tester
• Use with tone generators, test sets and other test devices to troubleshoot
and isolate problems with telephone circuits
• Two jacks allow in-line testing without service interruption
• The TurTEL 8 has two eight-position, eight-wire jacks
• Simple, push button operation to check polarity and power
• Reduced chance of shorting adjacent alligator clips due to unique shape
• Test contacts are perforated to provide sure grip for alligator clips or use
of probes
• Patch cord included
• Heavy-duty stainless steel belt clip
46050
CAT. NO.
46050
UPC NO.
46050
DESCRIPTION
TurTEL 8 Modular Adapter
TelScout® TS90
TS90INTL
SPECIFICATIONS
SPECIFICATIONS
Environmental Temperature –
Operating: 32° F to 77°F (0° C to +45° C).
Non-operating: 12° F to 92°F (-20° C to +60°
C).Humidity – 95% RH, non-condensing.
EMI Emissions –
EN55011 class A.
EN60555-2.
Physical
Power
Battery Operation –
Battery Type: Six AA Alkaline.
Operating Time: >4.5 hrs. with backlight off.
Battery Saver:
Selectable for 5 to 30 minutes or disabled.
TRUSTED
290
• Two Pair Test Capability
• One-Step Setup
• Automatic Instrument Control Mode
• 45,000' (15 km) Fault Location Capability
• Splash and Drip Proof
• Single-Button Zoom Function
• Pair Comparison Mode
• Splits/Crosstalk Mode
• Intermittent Fault Location
• Measures Distance to Fault in Feet, Meters, or Time
• Configurable for Any Cable Type and Vp (0.300 to 1.000)
• Accurate (±3 ft. at 10,000 ft.)
• On-line Tutorials
• Large Backlit Display
SINCE
1862
CAT. NO.
Dimensions
Height
Width
Depth
in.
5.6
8.3
1.8
mm
141
211
43
Weight
Net
.lb
2.2
kg.
1
UPC NO.
DESCRIPTION
TS90INTL
012154500
26345
60740
Telescout, International TS90
Leads
THM5BAT
60756
Rechargeable Battery Pack
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
CableScout™ TV220 - TDR Cable Tester for CATV
TV220
• Easier-to-use GUI interface requires little or no training
• PC application is compatible with all the current operating systems
• Improved clarity and trace functionality makes it even easier to identify faults
on-screen and determine noise versus the fault
• Even higher SNR and Resolution makes it easier to identify events that were
previously difficult or impossible to find
• Zero dead zone at the launch allows the user to see faults immediately
• Improved trace update rate allows you to see changes to the fault faster (5
times/sec. versus 2 times/sec.)
• Higher capacity to hold traces
• USB interface for trace download
• Lighter weight and longer charge life with the new lithium-ion battery
•TestWizard™ one-button testing
• Automatic Return Loss Measurements
• Automatic Multiple Event Marking
• High-Resolution, Short Pulse Width (1 ns)
• Rugged enough to withstand a 2 meter drop
CAT NO.
UPC NO.
TV220
TV220-0350
1155-1010
174173401
174326900
Return Loss
Distance Accuracy
Display
DESCRIPTION
TDR for CATV Broadband
Soft Carrying Case
Power Supply, AC-DC
Vehicle DC Adapter/Charger
Replacement Power Cord
SPECIFICATIONS
SPECIFICATIONS
Output
00676
17404
25877
21640
21641
Test Signal Output – 1/2 Sine
Amplitude – 4V into 75 Ω
Pulse Width – 1 ns, 5 ns, 25 ns
Output Impedance – 75 Ω
Acquisition System Bandwidth – 400 MHz
Automatic at cursor location
Resolution: ±1 dB
Input Protection – ±400 VDC + peak AC up to 440 Hz,
30-second duration
Maximum Distance Range – 12,000 ft. (3,658 m),
depending on cable type and condition
Gain – 0 to 72 dB
Waveform Storage – Minimum of 20 waveforms with notes
Feet:
0 to 2,000 ft.: ±2 ft. ± uncertainty in Vp 2,001 to 6,000
ft.: ±3 ft. ± uncertainty in Vp 6,001 to 12,000 ft.: ±4 ft. ±
uncertainty in Vp Meters:
0 to 610 m: ±0.6 m ± uncertainty in Vp
611 to 1830 m: ±0.9 m ± uncertainty in Vp 1831 to 3658
m: ±1.2 m ± uncertainty in Vp
Resolution: 640 x 440 (281,600 pixels)
Size: 7.2 inch
Type: High contrast LCD
Backlight: Operator switchable
Waveform Display Resolution – 0.33% of selected range,
4.5 cm (0.15 ft.) minimum
Display Ranges – Twelve display ranges from 6 ft.
(1.8 m) to 12,000 ft. (3,658 m), plus single-button
zoom window
Output Port – Serial 9-pin D type connector
Distance Measurements – Meters, feet, nanoseconds
Power
AC Operation –
Battery Operation –
General Characteristics
Temperature –
EMI Emissions –
Safety –
Voltage Ranges: 110 V, 220 V, or 240 V with appropriate
AC to DC adapter
Line Frequency: 50 Hz to 60 Hz
DC Operation –
Voltage Range: 9 to 16 VDC @ 1A (charging and operating)
Type: Internal Li-Ion rechargeable battery
Operating Time: Typically 12 hours continuous operation
(backlight off)
Battery Savers (user selectable) –
Shutoff: 5 to 30 minutes or disabled
Backlight: Shutoff 5 to 30 minutes, disabled, or always on
Operating: –10° C to +40° C (+11° F to +104° F) Nonoperating: –20° C to +60° C (–4° F to +140° F) Humidity
– 10% to 95% (non-condensing)
Field Usage – Shock, water, and dust resistant
Durability – Survives drop of 2 meters (6 ft.) to concrete in
standard soft case. Drip proof, dust resistant
EN55011, Class A
EN60555-2
CE (Low Voltage Directive)
PHYSICAL
Dimensions
Height
Width
Depth
Weight
Net
Centimeters
Inches
24
30
9
9.5
11.5
3.5
Kilograms
Pounds
3
6.4
www.greenlee.com
291
COMMUNICATIONS
COPPER & DSL TESTING
CableScout™ TV90
• High performance easy to use Time Domain Reflectometer for Coaxial
testing applications
• Employs optimized pulsing and sampling, coupled with advanced
filtering and signal-processing techniques to ensure clean waveform
and easy identification
• Context-sensitive help screens for all functions
• Small, portable and lightweight 2.2 lbs. (1kg)
• Includes rechargeable battery pack
• Includes twisted pair adapter and test probe
CAT. NO.
TV90US
THM5BAT
THM5AC
TS90-0350
TV90
UPC NO.
12600
60756
21729
21739
DESCRIPTION
TV90 CableScout™ TDR
Rechargeable Battery Pack
AC Adapter 110V
Soft Carrying Case
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Easy to operate (help screens available for all functions)
Fast fault finding with automatic gain and vertical waveform positioning
One-button Expand/Full View Function and zoom control.
Precision accuracy 0-200 ft +- 2 ft. 1% beyond.
Range up to 4000 ft.
High-resolution with optimizing pulse and sampling and advanced filtering
Input Protection: 200 VDC + Peak AC.
Rugged - designed for harsh environments
Large 7.2-in. high-resolution backlit display.
International power supply options
TRUSTED
292
SINCE
1862
Environmental Temperature:
Operating: 32° F to 77°F (0° C to +45° C).
Non-Operating: 12° F to 92°F (-20° C to +60° C).
Durability: Survives Drop test of 6 foot (2m) to concrete in soft case
Power: 110 V, 220 V, 240 V with appropriate power adapter
Battery type: 6 AA Alkaline and NiCad rechargeable pack. 4.5 hours
continuous operation with adjustable battery saver modes
Standards
UL, FCC EMI, CAN/CSA, EN, and CE
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
WIRE & CABLE IDENTIFICATION
Classic 77 Series Tone Generators
FEATURES / SPECIFICATIONS
77HP-G
77HP-G/6A
77M-G
Selectable Warble Tone
Continuity Testing
Polarity Testing
Talk Battery Supply
Two-line Modular Test Lead (RJ-11)
Three-color LED (identifies AC ring voltage)
Weather-Resistant Design
Bent Nose Clips with Bed-of-Nails Penetrator
RJ11 & RJ45 socket
Lanyard
Battery Operated (9V not included)
✔
LED & Beeper
✔
✔
✔
✔
✔
✔
LED & Beeper
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
LED
✔
✔
✔
✔
✔
✔
✔
✔
77HP-G
77M-G
77HP-G/6A
Classic 77 Series Tone Generators
Permits technicians to identify the conductor within a bundle, at a crossconnect point or at the remote end. Can be used on twisted pair wiring
(telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC
wiring and most other wiring.
CAT. NO.
UPC NO.
DESCRIPTION
77HP-G
77HP-G/6A
77M-G
49991
49992
49993
77H-GP Tone Generator
77HP-G/6A Tone Generator (ABN clips)
77M-G Tone Generator (basic)
Note: Not for use on energized AC wiring
CAT. NO.
UPC NO.
DESCRIPTION
77CS
08686
Leather Belt Holster for Classic 77 Series
Tone Generators
77HP-G
77CS
Replacement Piercing Clips
• These traditional telco-style clips can be used with almost any style
cordsets.
• Clips feature bent nose design for use on 66 style punchdown blocks and
bed-of-nails penetrator for use on insulated wires.
• Package of two clips with red and black boots.
CAT. NO.
RPC
RPC
UPC NO.
08710
DESCRIPTION
Piercing Clips
www.greenlee.com
293
COMMUNICATIONS
COPPER & DSL TESTING
Station Master Pro
• Troubleshoot irrigation systems
• Activate and cycle solenoids
• Test solenoids for continuity
• Send tone to identify wires
• Measure clock voltage
• Low battery indication
• Easy-to-understand LEDs
• Test leads with Bed-of-Nails and piercing Pin Clips
• 1-year limited warranty
SPECIFICATIONS
Minimum Voltage for Clock LED
(LED intensity increases as voltage increases)
Minimum Battery while Testing
Maximum Input Voltage between Test Leads
Solenoid Circuit Recharge Time
Maximum Distance Range to Activate one Solenoid
24B
Power Source
Battery Life
Operating/Storage Temp.
CAT. NO.
24B
UPC NO.
86786
15 VAC
10.5 VDC
28 VAC
2.5 seconds
12 AWG Loop 3000-13000 feet
14 AWG Loop 2000-8500 feet
18 AWG Loop 500-3000 feet
9V alkaline batteries
3 hours continuous
32°F - 122°F (0° - 50°C)
DESCRIPTION
Station Master Pro
Station Master Pro Kit
• Troubleshoot irrigation systems
• Chatter mode for audible locating of valves
• Activate any 24V AC valve solenoid
• Test solenoids for continuity
• Send tone to identify wires
• Check clock AC voltage
• Low battery indication
• Easy-to-understand LEDs
• Test leads with 'bed-of-nails' and piercing pin plips
• Tracing valve wiring
• Locates underground solenoids
SPECIFICATIONS
24BK
Minimum voltage for clock LED
Minimum battery while testing
Maximum input voltage between test leads:
Solenoid activate output voltage:
Battery:
Operating/storage temperature:
Relative humidity (max):
CAT. NO.
24BK
TRUSTED
294
SINCE
1862
UPC NO.
86787
DESCRIPTION
Station Master Pro Kit
15 V AC
10.5 V DC
28 V AC
27 to 18 V AC
2 - 9V Alkaline batteries
32°F to 122°F (0°C to 50°C)
80%
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Professional GX Series Tone Generators
77GX
• Microprocessor controlled circuitry for increased reliability
• Two-line polarity indication for fast outlet identification
• Automatic shutoff to prevent battery drain
• Snag-proof boot prevents broken plug tabs
• Convenient wrist/hanging lanyard
• Three distinct, selectable tone signal outputs for multiple
line identification
• Two selectable tone power outputs for use on open and shorted pairs
• Independent continuity test function
• Independent talk battery supply with higher output voltage
• Fixed alligator clips and removable modular plug for multiple
connection options
• 77GX2 includes premium telco-style bent nose clips with piercing pin and
bed-of-nails connectors
CAT. NO.
77GX
77GX2
UPC NO.
60556
60560
DESCRIPTION
77GX Tone Generator
77GX2 Tone Generator
Note: Not for use on energized AC wiring
AdapToner Modular Breakout Tone Generator
• The AT8 Tone Generator makes it simple to test continuity, polarity,
send tone and even supply talk battery to any configuration of pairs in
8-position ­modular jacks and plugs
• Combines the features of our tone generators and a modular
breakout adapter
• In-line testing is made simple with both a modular plug and jack on
each unit
• 8-position “snag-proof” modular plug
• 8-position jack with protective cover
• Quick reference guide with common wiring configurations
• Selectable solid/warble tone signal
• Tone, continuity and talk battery supply using alligator clips
• Weather-resistant design
• Battery operated (9V not included)
AT8
CAT. NO.
AT8
UPC NO.
08693
DESCRIPTION
AdapToner Modular Breakout Tone Generator
Note: Not for use on energized AC wiring
www.greenlee.com
295
COMMUNICATIONS
COPPER & DSL TESTING
LAN Toner with HUB Blink and Detect
• The LAN Toner is designed for the network installation and maintenance
professional and can be used on any wiring system including datacom,
telecom, security/alarm, audio and CATV
• Blinks HUB, Switch Port, and PC activity lights for fast identification
• Detect LAN hubs & switches
• Provides tone signaling, continuity testing and telephone line polarity
­indication combined with a modular breakout adapter
• Selectable tone outputs for identifying multiple cable runs
• Includes multiple connection options
CAT. NO.
AT8L
UPC NO.
60583
DESCRIPTION
LAN Toner
Note: Not for use on energized AC wiring
AT8L
Tone Test Set
• Our most comprehensive tone test set
• Traditional alternating tone signal for wire identification
• Audible line condition testing (level) indicates dead,
working and off-hook lines
• Line 1 and 2 polarity testing using 4-conductor modular plug
• Improved talk battery supply for communication over inactive pairs
• Tone and test functions using either modular plug or 24" alligator
clip leads
• Audible resistance level measurement
• Audible capacitance level measurement
• Battery operated (9V not included)
CAT. NO.
600LS
UPC NO.
08680
DESCRIPTION
Tone Test Set
Note: Not for use on energized AC wiring
600LS
TRUSTED
296
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Alarm Loop Verifier/Tone Generator
• Designed specifically for the security and alarm industry, the PE620 can
be connected to a normally open or normally closed loop pair
and provides a distinct audible tone when the alarm condition occurs
• Latching feature provides a simple method for identifying intermittent
­failures (“swingers”) and confirming operation of switches at
remote ­locations
• In the latching mode, the unit will catch the alarm condition
and continue sounding until the tester is reset
• As a tone generator, the unit provides a traditional variable tone that
can be applied using the 24" red and black test leads or a convenient
6-position modular plug
• Convenient magnetic back plate allows the PE620 to be mounted directly
to the control panel cabinet or door
• Battery operated (9V not included)
CAT. NO.
PE620
UPC NO.
08665
DESCRIPTION
Alarm Loop Verifier/Tone Generator
Note: Not for use on energized AC wiring
PE620
Data Mate™ Precision Tracing Tone Generator
• Trace wire or cable without interfering with digital two-way cable
or ADSL services
• The model 7780 Data Mate™ Precision Tone Generator is intended to
provide tone for tracing and troubleshooting communication circuits
without disrupting digital traffic on the line or adjacent lines
• The high purity of the tracing tones combined with internal isolating filters
allows safe tracing on circuits that carry digital services above the
baseband (two-way cable and ADSL)
• The high-power differential output of the 7780 makes tones easy to find,
even over long distances. Also useful for continuity testing and polarity
­testing, the 7780 provides the standard warble tone and talk
battery supply
• Two-way Broadband Compatible.
• Modular and Telco Pro Alligator
Leads.
• ADSL Service Compatible.
• Long Range.
• Popular, Standard Warble Tone
Frequencies Continuity Testing
• Compatible with existing tone.
• High Power Tone Output.
• Line Voltage and Polarity
Indication.
• High Purity Tone Signal.
• Low Crosstalk.
• Low Battery Indicator.
• Filter-isolated Circuitry.
PE7780
SPECIFICATIONS
Electrical
Output Power Output Signal Frequency
Output Impedence
Mechanical
Length 5.5" (140 mm)
Width 2.25" (57 mm)
CAT. NO.
UPC NO.
PE7780
60777
+9dBm
577/982 Hz alternating
3,500 ohms minimum, 25kHz to 1.1 MHz
Depth 1.0" (25 mm)
Weight 0.38 lbs. (0.17 kg)
DESCRIPTION
Data Mate™ Tone Generator
Note: Not for use on energized AC wiring
www.greenlee.com
297
COMMUNICATIONS
COPPER & DSL TESTING
Tone Probes Selection Guide
MODEL NO.
Powerful 2" Rear-fire Speaker
One-button Operation
Adjustable Volume Control
LED for Visual Signal Strength Indication
Recessed Tabs for Telephone Test or Headset Connection
Headset Jack (audio shock protected)
LED Flashlight
Noise Filtration
Replaceable Tip
Five-Minute Auto Shutoff
Low-battery Indicator
Battery Operated (9V not included)
Water Resistant
"Mains Power" Warning (acAlert® option)
Patented
200B-G
200EP-G
200GX
200FP
200XP
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
200C
200EP-G
TRUSTED
298
SINCE
1862
✔
✔
✔
✔
200B-G
Tone Probe Amplifiers
✔
Two-Button
✔
✔
✔
200EP-G
Tough & Water Resistant Multi-Filter Tone Probe
500XP
500XP
200GX
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
200FP
200XP
✔
✔
✔
✔
✔
✔
✔
✔
500XP
• Water resistant (floats) and tough, combined with all the very best digital
signal processing filtering 500XP will help identify signals buried in the
worst of noise
• Simple two-button operation with dual signal strength indicating LEDs
can work with any tone generator
• Headset allows discrete use in quiet environments and can help in
acoustiacally noisy areas
• Option to enable acAlert®, which helps warn users if brought near
hazardous ac power voltages which may be inaudible if using the
advanced filtering
CAT. NO.
UPC NO.
500XP
500XPB
HS001
500XPH
01125
01085
01126
02642
DESCRIPTION
500XP Pair Tracing Probe (POS)
500XP Pair Tracing Probe (Boxed)
Replacement Headset
500XP Pair Tracing Probe Holster
• Used in conjunction with any tone generator, Tone Probe Amplifiers permit
wire and cable identification without having to make direct metallic contact
with the conductor
• All models feature a powerful speaker for noisy environments,
recessed on/off button control and high gain for accurate wire identification in
congested cable bundles and equipment rooms
• The 200B-G also includes adjustable volume control for precise identification
• The 200GX also includes an LED for visual signal strength indication and
recessed telephone test set connectors
• The 200EP-G also includes a headset jack (audio shock protected) and an
LED Flashlight for working safely behind furniture, inside racks or in dim
lighting conditions
CAT. NO.
UPC NO.
200B-G
200GX
200EP-G
200C
49986
60557
49987
08670
DESCRIPTION
Tone Probe, Basic
Tone Probe, Standard
Tone Probe, Standard, with Headset Jack & Flashlight
Leather Belt Holster for 200 Series Tone Probe Amplifiers
= REPLACEMENT PART
= NEW PRODUCT
= ACCESSORY
B
= BARE TOOL
Filter Tone Probe
• By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP
can be used with any tone generator for faster, more accurate,
cable and wire ­identification
• Slim, comfortable design for use in limited-space areas
• Recessed on/off push-button control to conserve battery life
• Adjustable sensitivity/volume control to increase accuracy
• Blended carbon/plastic tip to reduce the risk of shorting terminals
•Patented
200FP
CAT. NO.
UPC NO.
200FP
200FP/50
08672
60467
DESCRIPTION
Filter Tone Probe (60Hz mains)
Filter Tone Probe (50Hz mains)
Multi-Filter Tone Probe
• Single button selects between default mode and two kinds of
powerful noise filters
• Filtering means faster, more accurate pair tracing
• Digital signal processor for accuracy and sensitivity
• Durable, light weight
• Audible and visible signal detection
• Continuous, wide-range volume control
• Butt set terminals
• Field replaceable tip, spare tip included
• Uses a single 9V battery
• One probe for many applications
• Works with any tone generator
• The narrowband filter mode is especially well suited for 577Hz Telco tone
sources and a version is available for 1kHz systems (983Hz)
200XP
CAT. NO.
UPC NO.
200XP
200XP/50
60887
60888
DESCRIPTION
Multi-Filter Tone Probe (60Hz mains, 577Hz narrowband)
Multi-Filter Tone Probe (50Hz mains, 983Hz narrowband)
Replacement Plastic Tips for 200 Series Probes
• Plastic tips perform much the same as traditional metal tips while
reducing the risk of shorting terminals
• Specially formulated with a carbon powder and carbon fiber
blended plastic
• Tips fit 200B, 200EP, 200GX, 200FP and 200XP probes
• RPT-1 comes with two pencil-style tips and two spade-style tips
RPT-2
CAT. NO.
RPT-1
RPT-2
UPC NO.
08711
60561
DESCRIPTION
Plastic Tips for 200B, 200EP, 200FP and 200XP
Plastic Tips for 200GX
RPT-1
Replacement Metal Tips for 200B and 200EP Probes
RMT-1
• Metal tips provide maximum performance when probing insulated wires
or making direct metallic contact
• Made of nickel-plated brass
• Tips fit 200B and 200EP probes
• Package contains two pencil-style tips
CAT. NO.
RMT-1
UPC NO.
08709
DESCRIPTION
Metal Tips for 200B and 200EP Probes
www.greenlee.com
299
COMMUNICATIONS
COPPER & DSL TESTING
Precision Tone Generator
177
• Used in the telecommunications industry for pair identification
and fault locating
• Supplies a precise 577.5Hz crystal controlled signal frequency.
• Variable output allows technicians to adjust signal strength to suit field
conditions and improve accuracy
• Designed to work with any common amplifier and exploring coil for
aerial fault locating
• For communications over inactive pairs, the unit supplies talk battery to
power two telephone test sets (buttsets)
• Each of the three test leads is equipped with traditional bent nose p­ iercing
clips with “bed-of-nails” insulation piercing pins
• The tone generator and test leads fit neatly in a durable, protective woven
polyester carrying case with shoulder strap
• Battery-operated (1 – 6V lantern included)
CAT. NO.
177
UPC NO.
08657
DESCRIPTION
Precision Tone Generator
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Frequency
Output Voltage
Output Signal Level
Construction
Dimensions
Weight
One 6V lantern battery
40 hours nominal
577.5Hz pulsed at 1Hz, crystal controlled
0.1 to 80Vp-p
0 to +30dBm
High impact ABS plastic in woven polyester case
7.25" x 5.5" x 4.5" in case
3 lbs. with battery
T-Bug® Digital Signal Identifier
• Used to detect digital signals on twisted pair cables, identify and isolate d­ igital
pairs for special handling and help technicians avoid accidentally putting pairs
out of service
• Operation is non-invasive and does not involve metallic contact so there’s
no risk of service interruption
• Simple to use – just place the probe between the pairs in question
• Differential amplifier saves time by allowing the technician to determine
whether the signal is truly present or is an induced signal from adjacent pair
• False readings due to noise are virtually eliminated
• Continuous self test ensures that the unit is functioning properly
•  Emits both visible and audible indication when digital signals are present
•Patented
0134-0500
CAT. NO.
0134-0500
TRUSTED
300
SINCE
1862
UPC NO.
60764
DESCRIPTION
T-Bug® Digital Signal Identifier
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Classic Tone and Probe Kits
• 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP
Tone Probe Amplifier in a rugged, woven nylon carrying case (700C)
• 601K-G Kit is a more basic version of the 701K-G kit, and includes the
77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered
nylon pouch
CAT. NO.
701K-G
UPC NO.
601K-G
701K-G
701K-G/6A
49989
49990
35775
DESCRIPTION
Classic Tone and Probe Kit, Basic
Classic Tone and Probe Kit, Standard
Classic Tone and Probe Kit, Standard with ABN clips
Premium Tone and Probe Kit
• Designed for more accurate wire identification, the 801K virtually
eliminates power-related noise from the tone and probe operation
• Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter
Probe in a convenient Cordura® case (700C).
801K
CAT. NO.
UPC NO.
801K
801K/50
08690
60466
DESCRIPTION
Premium Tone and Probe Kit
Premium Tone and Probe Kit (50Hz)
Xpert Tone and Probe Kit
• The Xpert Tone and Pobe Kit includes the 77GX (or 77GX2) Tone Generator
and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylon
carrying case
• Especially suited for tracing in noisy environments
CAT. NO.
UPC NO.
811K
811K/6A-BOX
36001
26375
DESCRIPTION
Tone and Probe Kit, Xpert
Tone and Probe Kit, Xpert with ABN clips
811K
AdapToner Kit
• Designed for fast, accurate wire identification by combining the features
of our tone generators and modular breakout adapter
•  Kit includes the AT8 Modular Breakout Tone Generator and 200EP
Inductive Amplifier in a convenient carrying case (700C)
CAT. NO.
AT8K
UPC NO.
08694
DESCRIPTION
AdapToner Kit
AT8K
www.greenlee.com
301
COMMUNICATIONS
COPPER & DSL TESTING
802K Digital LAN Tracing Kit
• The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting
and tracing solution for LANs and other types of VDV wiring. The industry
standard 200FP filter probe (60Hz) is designed to eliminate hum from
fluorescent lights and AC power wiring that can obscure tracing tones
• The AT8L LAN Toner not only generates multiple tracing tones
and provides basic wiring tests, but indicates the presence of
10/100Base-T network service
CAT. NO.
802K
UPC NO.
36000
DESCRIPTION
Digital LAN Tracing Kit
802K
LAN Toner Kit
• Designed for the network installation and maintenance professional,
the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity
lights for fast identification. This kit can be used on any wiring system
including Datacom, Telecom, security/alarm, audio and CATV
• Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier
in a rugged, woven nylon carrying case (700C)
CAT. NO.
AT8LK
UPC NO.
60584
DESCRIPTION
LAN Toner Kit
AT8LK
CATV Cable Tone Test Kit
• Designed specifically for the CATV industry, this kit allows you to tone through
splitters, directional couplers and traps
• Simple to use, the 402K provides accurate results and will eliminate long
delays trying to figure out non-tagged or mis-tagged cable drops
• Kit includes one transmitter, one receiver, one male F-to-F connector adapter
cable, one male F-to-alligator clip adapter cable and a carrying case (700C)
• Transmitter and receiver are equipped with female F-connectors
• Three methods of signal reception: electrostatic pickup for non-terminated
cables, electromagnetic pickup for terminated or shorted cables and direct
connection when identifying in the presence of passive devices
• In continuity mode, provides both audible tone and LED display
• Identifies the presence of AC or DC voltage on the cable under test
• Four selectable tone outputs for multiple line identification
CAT. NO.
402K
402K
402T
402R
CS9
CS19
TRUSTED
302
SINCE
1862
UPC NO.
08677
60376
60377
60374
60378
DESCRIPTION
CATV Cable Tone Test Set
Transmitter
Receiver
Male to male F-connector adapter cable
F-connector to alligator clip
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Security and Alarm Kit
• Designed specifically for the security and alarm industry, the 620K
provides a simple method for identifying intermittent failures (swingers)
and ­confirming operation of switches at remote locations
• To better satisfy industry requirements, we’ve combined the Model PE620
Tone Generator with the popular Model 200EP Inductive Amplifier
in a durable woven nylon pouch (700C)
CAT. NO.
620K
UPC NO.
08682
DESCRIPTION
Security and Alarm Kit
620K
Tone and Probe Plus Cable-Check™
RJ45 LAN Tester
• True cable mapping function identifies:
– Good connection, opens, shorts and crosses
– Connector and cable pin-out
– Clear LED display for each pin and shield
– Shielded RJ45 modular plug socket
• Automatic display of mapping with dual speeds: slow or fast
• Tests RJ11 and RJ45 cables with runs up to 600’
• Check polarity of telephone line
• View telephone line status: dial tone, ringing or busy line
• Provides talk power for telephone lines and butt set use
•Selectable dual/single tone application for balanced and
unbalanced circuits
• Four tone generator patterns
• Test continuity of wires, cables and loads
• Tone generator features auto-off function
• Jack for headset
•Audible speaker with adjustable volume control
PA1573
CAT. NO.
DESCRIPTION
PA1573
Tone & Probe Plus Cable-Check™ Kit
www.greenlee.com
303
COMMUNICATIONS
COPPER & DSL TESTING
Cabling Pouch
• Designed to hold a complete set of wiring tools including: any (one)
77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a
punchdown tool, a cabling knife and scissors
• Convenient loop to hold most telephone test sets
• Removable “parts pouch” allows you to keep small components in reach
• Made of a durable woven nylon
• Fits belts up to 5" wide.
CAT. NO.
750C
750C
UPC NO.
08685
DESCRIPTION
Cabling Pouch
Tone and Probe Carrying Case
• Allows you to build your own kit using any tone generator
and 200 Series probe
•  Durable woven nylon
•  Fits belts up to 3" wide
CAT. NO.
700C
700C
TRUSTED
304
SINCE
1862
UPC NO.
08683
DESCRIPTION
Tone and Probe Carrying Case
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
STRUCTURED WIRING TESTERS
NETcat® Pro 2 NC-500
NC-500
• Test and troubleshoot telephone, data and coax wiring
• NETcat Pro 2 Additional Features:
– Gigabit device capability detection (still detects 10baseT and 100baseT too)
– Cable type, velocity of propagation library, user editable
– Power over Ethernet (PoE) detection
– Memo pad
• Detect split pairs, short circuits, broken and crossed wires
• Step TDR technology shows length to open or short of all pairs
• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
• Test patch cords and remote jacks
• Touch-screen control, included stylus slots into main unit
• Large icons ensure easy use with your finger too
• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is
highly visible in dark or brightly lit areas
• Remote test and ID unit stores in base of main unit
• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory
kit along with carrying case)
• Tone generator with four selectable precision frequency tones, compatible with
Greenlee advanced digital signal processing probes
• Operates on single 9V battery with low battery indication
SPECIFICATIONS
NC-510
(NC-500 not included)
NC-520
NC-500 Contents:
• NETcat Pro 2 main unit with stylus
• Removable remote jack and patch lead test and ID unit
• Twisted-pair (modular RJ45), coax (F) and
alligator clip test cords
• 9V alkaline battery
NC-510 NETcat Pro 2 Accessory Kit Contents:
• Seven additional remote jack test and ID units,
RJ45 and F (male)
• Carrying case to hold additional remote test ID units
and content of NC-500 main kit
Dimensions
Weight
Power
Requirements
User Interface
3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)
0.45 lb. (200 g)
9V Alkaline battery (PP3)
Environmental
Operating
Temperature
Storage
-20°C to 70°C
Temperature
RJ45 shielded jacks
F-type threaded female coaxial connectors
User selectable based on a known cable length.
40% to 100% in steps of 1%
0 to 2000 ft. 1 ft. (0.3 m)
±4% or 2 ft. (0.6 m) whichever is greater
Interface
Connections
TDR
Calibration
TDR Range
Resolution
Accuracy to
Open/Short
Remote
Identifier
Wiremap
Display LCD
Viewing Area
Backlight
Buttons
Dot Pixels: 128 x 128 dots
60.0 x 58.4
White LED
LCD touch-screen, Single
momentary contact push button
0°C to 50°C
2000 ft. (609.6 meters) maximum distance
358 ft (100 meters) maximum distance
CAT. NO.
UPC NO.
NC-500
NC-510
NC-520
23639
23640
05450
NC-520:
• Netcat Pro 2 Main Unit With Stylus
• Removable Remote Jack And Patch Lead Test and
Id Unit
• Twisted-Pair (Modular Rj45), Coax (F) And Alligator ClipTest Cords
• Seven additional remote jack test and ID units, RJ45 and F (male)
• Carrying case to hold additional remote test ID units and content of NC-500 main kit
• 9V Alkaline Battery
DESCRIPTION
NETcat Pro 2 Digital VDV Wiring Troubleshooter
NETcat Pro 2 Accessory Kit w/carry case
Netcat Pro 2 Main Unit With Stylus
www.greenlee.com
305
COMMUNICATIONS
COPPER & DSL TESTING
NETcat® Micro NC-100
• Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and
coaxial cables
• TIA/EIA standard wiring pair verification
• Detects shorts, opens, reversed polarity, crossed and split pairs
• Generates three distinct, selectable digital tone patterns for cable tracing
and troubleshooting
• Tracing modes can be adjusted for high performance LAN cables.
• Complete set of connector types standard (telephone, LAN and coax)
• Nested remote allows end-to-end testing of all wiring types
• Simple testing of LAN wiring and phone lines
• Detection of common wiring and connector errors
• Warning of hazardous voltages
• Checks for reversed telephone wires
SPECIFICATIONS
NC-100
Dimensions
Weight
Power Source
User Interface
150 x 70 x 33mm
220g including remote unit and battery
9V Alkaline battery (PP3)
Icon and seven segment type
Display LCD
Green LED
Backlight
Four momentary contact push button
Buttons
Environmental
Operating
Temperature
0°C to 50°C
Storage
Temperature
-10°C to 60°C
Interface
Connections
Network Split
Pair Detection
Pair Tracing
Tones
CAT. NO.
NC-100
TRUSTED
306
SINCE
1862
up to 95% non-condensing
Humidity
RJ45 shielded socket
RJ12 6-way socket
F-type threaded female coaxial connectors
Minimum cable
2 to 3 meters (5 to 10 ft.) depending on cable type
length
Alternating frequencies of 577Hz and 983Hz are produced at three user selectable rates. Designed for standard tone probes, but
compatible with precision digital Greenlee tone probes.
UPC NO.
23636
DESCRIPTION
NETcat® Micro Digital Voice Data and Video Wiring Tester
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
LAN ProNavigator® Tester & Remote
• Simple PASS/FAIL test results in one second allows technicians to quickly
move on to the next test site
• Generates oscillating audio tone for use with tone probes to locate cables
• Tests data and telephone cables up to 320 feet (100 meters) for proper
pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and
common category 5 configurations
• Tests unshielded UTP and shielded STP data cable
• Detects good connections, open connections, crossed wires and split pairs
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320
feet (100 meters) for continuity
• Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8,
RG11 and more
• Belt clips provided and lanyard holes embedded in case to attach
to belt or wrist
• Features low battery test and auto-off function to preserve battery life
• Includes standard 9V battery
PA1543
CAT. NO.
DESCRIPTION
PA1543
LAN ProNavigator® test set (main & remote),
2 RJ45 patch cords, 2 belt clips, 12 oz.(342 g)
LAN ProNavigator® test set (main & remote),
2 RJ45 patch cords, 2 BNC coaxial cables,
2 CATV “F”-to-BNC adapters, 1 BNC/BNC adapter,
1 shielded RJ45 coupler, 2 belt clips in durable case
Adapter, CATV “F” (female) to BNC (male)
PA901066
PA901074
NOTE: May not be compatible with CAT-6 flat or oval cable, or bonded cable.
PA901066
SPECIFICATIONS
MAIN
REMOTE
KIT
Weight
Dimensions
8 oz. (228 g)
5.25" x 6.75" x 2.25"
133 mm x 171 mm x 57 mm
2 oz. (57 g)
3.45" x 1.6" x 0.9"
87 mm x 41 mm x 24 mm
2 oz. (1140 g)
8.5" x 7.6" x 3"
216 mm x 193 mm x 76 mm
www.greenlee.com
307
COMMUNICATIONS
COPPER & DSL TESTING
Wiremap Tester
• Quickly identifies opens, shorts, reversals and transposed pairs
• Economical tester includes all the basic functions
• Connecting the receiver unit automatically activates the test process
• Sequencing red and green LEDs provide fast, accurate
and simple-to-­understand results
• Alerts the technician if connected to an active circuit without harming the unit
• Connect any eight-position modular plug to the appropriate jack on the
transmitter and a sweeping tone signal is applied to all pairs
• At the far end of the cable, use any Greenlee Communications inductive
amplifier (probe) to locate the corresponding plug or jack
• Battery operated (9V not included)
468
CAT. NO.
468
468C
468T
468R
CSI0
UPC NO.
08661
60382
60379
60380
60381
DESCRIPTION
Wiremap Tester
Carrying Case for the Wiremap Tester
Transmitter
Receiver
Modular Adapter Cable
Data/Link ID and Cable-Check™
•Cable mapping function tests data & phone connection schemes including
patch cords and installed cables
•Identifies cross-over telephone connections
•Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP
link pulse
•Identify data & link transmission speeds with real time detection: 100/10 MB
•Automatically scans with choice of slow or fast speeds
•Low battery detection on LAN ID tester
•Includes 9V battery, 2 RJ45 patch cords and durable nylon carrying case
with belt loop
PA1576
TRUSTED
308
SINCE
1862
CAT. NO.
DESCRIPTION
PA1576
Data/Link ID and Cable-Check™
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
LAN Cable-Check™
• Identifies cross-over telephone connections
•Automatically scans when cables connected and unit turned on
• Two scan speeds: fast or slow
• Maps connector and cable pin-out
• Tests cables up to 1,650’ or 500 m
•Also tests RJ11 connections using an RJ11 adapter (not included).
• 2, RJ45 patch cords and 9V battery included
•Contained in a durable nylon carrying case with belt loop
CAT. NO.
DESCRIPTION
PA1574
LAN Cable-Check™ Tester
PA1574
LAN and A/V Cable-Check™
PA1594
PC Cable-Check™ PRO
PA1577
Network
• Tests RJ45 patch cords and network installations to identify good
connections, opens, shorts or cross-connections
• Identifies data and telephone connection schemes
• Maps cable pin-out
Coax
• Tests continuity of cords and installed cable runs
• Identifies good connections, opens and shorts
Features and Benefits:
• Automatic scanning
• User selectable slow or fast speeds
• Quickly check cable installations and patch cords
• Easy-to-use with clear LED read-outs
Includes:
• 2 RJ45 patch cords
• 9V battery
• 75-ohm male terminator
• Durable, nylon carrying case
• Cable TV “F” female adapter • RCA to CATV "F" adapter.
CAT. NO.
DESCRIPTION
PA1594
LAN and A/V Cable-Check™
•Quickly & easily troubleshoot cables to eliminate the cable as the source
of a problem
•True cable mapping for over 20 different cable types: BNC coax & S-Video,
VGA, Firewire, USB & Mini-USB, PS/2, parallel printer, RS-232 serial and
Cat5e or Cat6 LAN
•Supports these connectors: male and female DB9, DB15, DB25 and
HDB15; 36-pin Centronics printer; RJ11, RJ12, RJ45 shielded &
unshielded; BNC coax female; male and female mini-DIN6; female miniDIN4; USB-A and USB-B; mini-USB 5-pin; IEEE 1394 FireWire 4- and 6-pin
•Tests 50 ohm cables up to 1000’ (305 m) & 75 ohm cables up to
600’ (183 m)
•Easy to read and understand LED indicator lights
•New rugged case with built-in handle for easy transport
•Auto scan or manual scan modes
•Rubber feet grip to desk or bench to prevent slipping
•Auto-off after 30 seconds of non-use to extend battery life
•9V battery included
CAT. NO.
DESCRIPTION
PA1577
PC Cable-Check™ Pro
www.greenlee.com
309
COMMUNICATIONS
COPPER & DSL TESTING
BURIED FACILITY LOCATION AND MARKING
Tracker II
• Traces the path and determines the depth of wires and metallic pipes on active or
dead systems without having to deactivate the system
• Lightweight receiver provides audible and visual indications of signal strength
• Transmitter output and receiver sensitivity are fully adjustable for
maximum accuracy
• Transmitter offers three methods of connection: direct, inductive coupler and
inductive antenna
• Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in
inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips and
durable polyethylene case
• High frequency transmitter provides range up to 4,000' (1,219 m) and depths
up to 7' (2 m)
HS-1 (08695)
• Receiver is 32" long (813 mm)
Optional headset is available • Battery operated (eight AA and one 9V battery is included)
for use in high-traffic areas or
• Molded carrying case included
other noisy environments.
501
CAT. NO.
501
501T
501R
IC1
CS16
500CA
UPC NO.
08662
60353
60352
60354
60355
60351
DESCRIPTION
SPECIFICATIONS
Tracker II
Transmitter
Receiver
Inductive Clamp
Transmitter Cord Set
Case with Antenna
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Automatic Shut Off
Construction
Dimensions
Weight
Transmitter – (8) AA batteries; Receiver – (1) 9V battery
Transmitter – 30 hours nominal; Receiver – 10 hours nominal
447.5kHz
40Vp-p (140mW) maximum
240VAC/500VDC
90 Min. Transmitter and Receiver
Transmitter/Receiver – powder coated aluminum
Case – vacuum formed polyethylene
Transmitter – 4.25" x 3" x 3.25" (108 x 76.2 x 82.6 mm)
Receiver – 32" x 2.75" x 4" (812.8 x 69.9 x 101.6 mm)
Case – 33.5" x 8.25" x 3.75" (850.9 x 209.6 x 95.3 mm)
6.7 lbs. complete kit (3.04 kg)
Buried Line Locator
BLL-200
CAT. NO.
UPC NO.
DESCRIPTION
SPECIFICATIONS
BLL-200
07796
Buried Line Locator
Transmitter
Operating Voltage
• LED and LCD signal strength indicators make it quick and easy to find
exact line location
• Lightweight and ergonomically balanced
• Automatic signal boost makes it easy to trace lines, even those with
very weak signals
• Receiver may be used in active or passive mode
• Receiver locates multiple passive frequencies with a single setting
• Receiver automatically locks out passive range when it detects a transmitter
signal, reducing the chance of tracing other lines carrying weaker signals
• Microprocessor-based circuitry delivers increased accuracy and features
auto-gain control in all environments
• Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m).
• Transmitter can be connected to live lines up to 600V
• Molded carrying case included
• Limited Lifetime Warranty
Current
Frequency
Operating Temperature
Size
Power
Weight
TRUSTED
310
SINCE
1862
0-600VAC,
0-300 VDC
13mA (open line)
150mA (live or shorted line)
33.3kHz
0°F to 120°F
(-17°C to 50°C)
7.5" x 4" x 2.1"
(190.5 mm x 101.6 mm x 53 mm)
6 VDC (4 AA batteries)
15 oz. (425 g)
(with batteries and clamp)
Receiver
Depth Range
Depth Resolution
Passive Trace Frequency
Operating Temperature
Size
Power
Weight
Measures: 0-15 ft
Traces: 0-20 ft.
0.1 ft. increments
‑ 12Hz-24kHz
0°F to 120°F
(-17°C to 50°C)
4.1" x 8.5" x 38"
(104.1 mm x 215.9 mm x 965.2 mm)
6 VDC (4 AA batteries)
1 lb. 12 oz. (794 g)
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Pulser Fault Locator
PE2003
Great complement to any
buried line cable locator.
• Identifies the exact location of even the smallest breaks in insulation
by “pulsing” a high-voltage signal that radiates into the earth at the location
of the faults. With the A-frame mounted receiver, a visual analog meter
points the way to the source of the voltage
• Multiple faults on a single wire can be identified indicating the need
to ­replace instead of repair
• Extra-long test leads feature heavy-duty alligator clips for use on multiple
cable types
• Includes a rechargeable transmitter, receiver, A-frame, ground stake,
120V charger and a 12V DC (cigarette lighter) adapter
• Battery operated (one 12V and one 9V battery are included)
• Molded carrying case included
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Power
Voltage Protection
Construction
PE2003
CAT. NO.
UPC NO.
PE2003
2000H
2000R
AF2
CH1
CH2
59F0002
08666
60357
60358
60482
60360
60361
66216
DESCRIPTION
Pulser
Dimensions
Transmitter (Includes CH1 & CH2)
Receiver
A-Frame
AC Charger
DC Charger
Battery, Replacement (12V 2.5 Ah)
Weight
Transmitter: (1) 12V rechargeable battery
Receiver: (1) 9V battery
Transmitter: 23 hours per charge; Receiver: 200 hours
2400VDC peak
240VAC/400VDC
Transmitter – aluminum housing in polyethylene case
Receiver – powder coated aluminum
Transmitter – 17" x 8.5" x 6.5" (421 mm x 215 mm x 160 mm)
in case
Receiver – 33.5" x 21.75" x 3.25" (840 mm x 550 mm x 8 mm)
on A-Frame
12.5 lbs. (5.7 kg) complete
Wire Finder/Mini Locator
• Traces energized or non-energized wires in walls and drop ceilings
• Provides reliable results on buried cables to depths of 3' (1 m)
and lengths up to 1000' (308 m)
• Determines the approximate depth of the wire before digging
• Compact design and easy-to-understand operations
• Fully adjustable transmitter and receiver for accurate locating
• Quick change test leads for use in any industry, even international
power outlets
• Voltage protection to allow use on live AC circuits
• Automatic shut-off to prevent accidental battery discharge
• Housed in a durable, molded carrying case with a quick reference o­ peration
guide on the inside of the lid
• Battery-operated: (2) 9V batteries included
508S
SPECIFICATIONS
CAT. NO.
508S
508ST
508SR
CS14
CS15
UPC. NO
08678
60363
60364
60366
60367
DESCRIPTION
Wire Finder/Mini Locator
Transmitter
Receiver
Alligator Clip Cord set
AC Outlet Cord set
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Dimensions
Weight
(1) 9V each (transmitter and receiver, included)
Transmitter 35 hours nominal; Receiver 20 hours nominal
447.5kHz
9Vp-p (11mW)
240VAC/500VDC
Transmitter/Receiver – high-impact ABS plastic,
Case – vacuum-formed polyethylene
Transmitter – 4" x 2.3" x 1" (101.6 x 58.4 x 25.4 mm), Receiver –
6" x 2.35" x 1" (152.4 x 59.7 x 25.4 mm),
Case – 9.5" x 8" x 3"(241.3 x 203.2 x 76.2 mm)
2.6 lbs. (1.2 kg)
www.greenlee.com
311
COMMUNICATIONS
COPPER & DSL TESTING
Wire and Valve Locator
• Adjustable transmit power allows you to select the best signal for maximum
performance
• Transmitter’s high power output offers extended range and use on higher
resistance wire paths that other locators can’t touch
• Receiver provides both audible and visual indications of signal strength.
• Lightweight receiver wand makes it easy for you to move along quickly
to locate even the longest wire path
• Rugged headphones block ambient noise and improve “feel” for the s­ ignal
• Includes transmitter, receiver, headset, ground stake, and complete i­nstructions
• Battery-operated: (8) “D” Cells and (1) 9V
SPECIFICATIONS
521A
Power Requirements
Transmitter: (8) “D” Cell;
Receiver: (1) 9V battery
Transmitter: 50 hours nominal
Receiver: 100 hours nominal
1748Hz
750Vp-p 285Vrms
120VAC/250VDC
Powder-coated aluminum housing in polyethylene case
33.5" x 8.25" x 3.75"
12 lbs. complete
Battery Life
CAT. NO.
UPC NO.
521A
521A-R
HS-1
86788
12623
08695
DESCRIPTION
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Case Dimensions
Weight
Wire and Valve Locator
Receiver
Headset
Locators Application Guide
FEATURE
BLL-200
501
Trace concealed wiring in walls and floors
PE2003
508S
•
Locate junction box relays and transformers
•
Locate switch gear
•
521A
•
•2
Find shorts to ground
Trace wires in PVC (nonmetallic conduit)
•
•
•1
•
Find opens in a circuit
•
Localize power and lighting panels
•
•
Operate on energized circuits
•
•
Operate on telecom circuits
•
•
•
•
Operate on power circuits (600VAC)
•
Operate on unenergized circuits
•
•
•
•
•
•
•3
•3
•3
Trace coax cable
•
•5
•5
•4
Auto gain circuitry for improved accuracy
•
Trace shielded cable
•
•
Trace buried metal conduit
1.
2.
3.
4.
5.
6.
AC voltage range
0-600V
0-240V
0-240V
0-240V
0-120V
DC voltage range
0-300V
0-500V
0-400V
0-500V
0-250V
Distance–receiver from transmitter
5,000 ft.
•7
5000 ft.
1000 ft.
•6
Transmitter battery
(4) AA
(8) AA
(1) 9V
(8) D
Receiver battery
(4) AA
(1) 9V
12V
rechargeable
(1) 9V
(1) 9V
(1) 9V
10,000 ohms and less–both ends isolated from grounds.
Does not locate the path–has to be predetermined and only in direct burial applications. 5,000,000 and less.
Transmitter connected to metallic shield.
Will trace coax providing the bOnd is in place at the remote end–will disrupt service.
No sorting (high RF bleeds) can trace coax if transmitter connected to braid.
Low frequency locators need a “path to earth” (dirt), 5000 ft. on an open conductor and 2500 ft. on a metallic pipe at 3 ft. deep
TRUSTED
312
SINCE
1862
7. Direct Connection 4,000 ft at 7 ft deep
Inductive Coupler 1,000 ft at 3 ft deep
Inductive Antenna 700 ft at 3 ft deep
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Marker-Mate®
• Designed to locate buried electronic markers, including Omni Marker™,
and Uni Marker®
• Five+ foot depth range
• Detects up to seven different marker types
• Scan mode provides simultaneous detection of all marker types
• User-adjustable Detection Threshold
• Digital signal processor accuracy
• Large-character display is easy to read
• Bar graph, numeric & audible signal strength indicators
• Speaker volume adjust
• Headphone jack
• Battery level indicator
• Low battery warning
• Adjustable time out feature prolongs battery life (and can be turned off)
• Weather resistant
• Rugged construction
SPECIFICATIONS
Electrical:
EML100
Twelve AA batteries
Battery Life: 20 hours typical
Environment:
Operating Temperature:
Storage Temperature:
Weather Resistant
Physical:
Length:
Width:
Height:
Weight:
CAT. NO.
UPC NO.
EML100
60798
-4°F to 122°F (-20°C to 50°C)
-40°F to 158°F (-40°C to 70°C)
30.7 in. (780 mm)
7.8 in. (198 mm)
12.8 in. (325 mm)
4.5 lbs. with batteries (2 kg)
DESCRIPTION
Marker-Mate Electronic Marker Locator
Omni Marker™
• Electronically marks and relocates buried facilities
• Unique design produces a uniform, spherical RF field in every direction
• Easily located up to 5' away with any modern marker locator
• Wider field with a signal peak directly above the marker provides
precise location
• Requires no particular orientation when buried
• Greater range than standard 4" ball markers
• High-reliability design lasts as long as your buried plant
• Color coded by utility application
•Patented
• Limited lifetime warranty
APPLICATION
COLOR
FREQUENCY
CAT NO.
Power
Water
Sanitary
Telephone
Gas
Cable TV
Non-Potable/Gen I
EuroPower
Red
Blue
Green
Orange
Yellow
Orange/Black
Purple
Red/Blue
169.8 kHz
145.7 kHz
121.6 kHz
101.4 kHz
83.0 kHz
77.0 kHz
66.35 kHz
0160-0001-1
0161-0001-1
0162-0001-1
0163-0001-1
0164-0001-1
0165-0001-1
0168-0001-1
0181-0001-1
134.0 kHz
UPC NO.
60765
60766
60767
60768
60769
60770
11050
05160
www.greenlee.com
313
COMMUNICATIONS
COPPER & DSL TESTING
Uni Marker®
• Electronically marks buried facilities for later relocation
• Rugged polyethylene case ensures years of useful life
• Small size and flat design attach easily to non-metallic utility box lids,
hand holes and other buried enclosures
• Location is simple with any modern marker locator
• Range is 25% more than other similar-style markers
• Signal peak ensures location within inches of the marker
• Color coded by utility application
• Limited lifetime warranty
TRUSTED
314
SINCE
1862
APPLICATION
COLOR
FREQUENCY
CAT NO.
Power
Water
Sanitary
Telephone
Gas
Cable TV
Non-Potable/Gen I
Red
Blue
Green
Orange
Yellow
Orange/Black
Purple
169.8kHz
145.7kHz
121.6kHz
101.4kHz
83.0kHz
77.0kHz
66.35kHz
0170-0001-1
0171-0001-1
0172-0001-1
0173-0001-1
0174-0001-1
0175-0001-1
0178-0001-1
UPC NO.
60771
60772
60773
60774
60775
60776
11059
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
FIBER OPTIC TEST EQUIPMENT
Optical Fusion Splicer
• Designed to meet virtually any FTTx installation – indoors and out. P2P installations
including backhaul, cellular, and LAN
• Core alignment minimizes splice losses
• Fully compatible with Greenlee® Splice-On Connectors. 250 Splice/ Shrink cycles
per battery charge
910FS
SPECIFICATIONS
Applicable Fibers
SM (G.652); MM (G.651); DS (G.653); NZDS (G.655);
BIF (G.657)
Fiber Display Magnification
240X
Tube Heating Mode
20 Preset / User Definable Modes
Adjustable 0-240 seconds
Fiber Cleaved Length
10mm
Cladding Diameter
80 to 150μm
Tube Heating Time (Typical)
36 seconds
Coating Diameter
100 to 1000μm
Attenuator Mode
0.1 to 15 dB
Fiber Count
Single
Electrode Life
3,000 Splices
Fiber Aligning Method
Auto Core Alignment
Display
5.7" Color, Turn-Over LCD
Splice Loss (Typical)
0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB
(NZDS & BIF)
Connectivity
RS-232; USB
Operating Conditions
Pressure: 0 to 16,404 feet
(0 to 5,000 meters) above Sea Level
Humidity: 0 to 95%
Temperature: 14 to 122°F (-10 to 50°C)
Storage Conditions
Temperature: -4 to 158°F (-20 to 70°C)
Power Supply
100 to 240V AC Adapter;
Li-ion Battery (6600 mAh)
Weight with Battery
6.92 lbs (3.14 kg)
Dimensions (HxWxD)
7.08" x 6.29" x 6.10" (180 x 160 x 155 mm)
Splicing Mode
60 Preset / User Definable Modes
Splice Time (Typical)
9 seconds (SM)
Number Of Splices Per Battery Charge
250 (including 60mm heat shrink cycle)
Splice-On-Connector
SC, LC, FC, ST
Arc Calibration Mode
Automatic and Manual
Protection Sleeve Length
60mm, 40mm, Micro Sleeves
Storage Of Splice Results
5,000 Results
Tension Test
2N
CAT NO.
PA1171
910FS
910FS-KIT1
910FS-KIT2
910FS-ELEC
910FS-PS
910CL
910CL-BLADE
910FS-250
910FS-900
910FS-SOC-SC-LC
910FS-SOC-ST-FC
910FS-BATT
910FS-EUR-CORD
910FS-UK-CORD
910FS-CHARG
910FS-CAR-ADAPTER
PA1171
UPC NO.
01328
01433
01432
01329
01330
01331
01640
01332
01333
01335
02401
01452
02571
02570
02641
25689
12225
DESCRIPTION
Optical Fusion Splicer
Fusion Splicer & Cleaver Kit
Contractor Fusion Splicer Kit
Replacement Electrodes
Replacement Power Supply
Optical Fiber Cleaver
Cleaving Wheel
250µm Adapter
900µm Adapter
Adapter, Splice-On Connector, SC & LC
Adapter, Splice-On Connector, ST & FC
Battery (910FS)
European Line Cord
UK Line Cord
Battery Charger
12 V DC Car Adapter
ProGrip 5-in-1 Fiber Optic Stripper
www.greenlee.com
315
COMMUNICATIONS
FIBER PRODUCTS
Optical Fiber Cleaver
• Accurate Cleaves. Cleave multi-mode and single-mode fiber optic cables
• Long Life. Blades rotate for longer life - over 48,000 cleaves
• Adaptable. Supports 250um, 900um fibers
• For use with the 910FS Optical Fusion Splicer for maximum speed and efficiency
• Dust bin. Safely collects end cuts during cleaving process
910CL
Note: If the 910CL is purchased without a
splicer. Please order either the 250um or
900um adapters or the fixed clamp.
SPECIFICATIONS
Applicable Fibers
Fiber Cleaved Length
Cladding Diameter
Coating Diameter
Fiber Count
Cleaving Angle
Blade Life
Weight
Dimensions
CAT. NO.
SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657)
10mm
125μm
0.25 mm and 0.9 mm
Single
< 1.5˚
48,000 Cleaves
0.56 lbs (255 g)
2.29" x 2.17" x 1.89" (58 x 55 x 48 mm)
UPC NO.
910CL
910CL-BLADE
910C-CLAMP
910FS
910FS-250
910FS-900
PA1171
PA1511
01331
16403
31529
01328
01332
01333
12225
10312
DESCRIPTION
Optical Fiber Cleaver
Cleaving Wheel
Fixed Clamp with Screw (910CL)
Optical Fusion Splicer
250µm Adapter
900µm Adapter
Buffer Strippers
Kevlar Cutter
Splice-On Connector
• Return loss: APC >60dB, UPC >55dB and MM 35dB (typical)
• 19 styles available: SM, MM, 10Gig
• Compatible with selected AFL, Sumitomo, and Fitel fusion splicers, suitable adapter
may be required
• 900um boot protects splice for easy cable management
• Includes color coded 900um buffer, boot, cleave protector and extended dust cap for
easy fiber indentification
SPECIFICATIONS
Connector Type
Insertion Loss (Max)
Optical Return Loss
Ferrule Type
Color Code
Operating Temperature
Industry Standards
SM/APC SM/UPC
0.3dB
>65dB
>55dB
Green
White
MM/62.5UM
MM/50UM
MM/0M3 MM/0M4
0.4dB
35dB (Typical)
All Zirconica Pre-Polished Ferrules
Beige
Black
Aqua
Aqua
-40 to 85 degrees C
RoHS Compliant, Tecordia GR-326-CORE Compliant
COMPATIBLE FUSION SLICERS
Manufacturer
AFL
Model
FSM11
(S/M)
Compatible
fiberTOOLS® SOCs
TRUSTED
316
SINCE
1862
All
Versions
FSM-17S
SC and
LC Only
Sumitomo
Fitel
INNO
FIS
FSM-18S
Type-25e
(U/S/M)
S122
(A/C/M/)
IFS10
CA3
FSM-19S
Type-39FH
S121 (A/M)
IFS15
FSM-60(S/R)
Type-46
S123 (C/M)
FSM-70(S/R)
Type-66
S153
Quantum
(Q101-CA)
S178A
All
Versions
All
Versions
SC,LC and
ST Only
All
Versions
All
Versions
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Splice-On Connectors & Adapters
CAT. NO.
(12 PACK)
SCAPC-SOC-12
SCUPC-SOC-12
SC62-SOC-12
SC50-SOC-12
SCOM3-SOC-12
SCOM4-SOC-12
FCAPC-SOC-12
FCUPC-SOC-12
FC62-SOC-12
FC50-SOC-12
FCOM3-SOC-12
FCOM4-SOC-12
STUPC-SOC-12
ST62-SOC-12
ST50-SOC-12
STOM3-SOC-12
STOM4-SOC-12
LCAPC-SOC-12
LCUPC-SOC-12
LC62-SOC-12
LC50-SOC-12
LCOM3-SOC-12
LCOM4-SOC-12
ADAPTER
AFL SOC ADAPTER
FITEL SOC ADAPTER
SUMI SOC ADAPTER
INNO SOC ADAPTER
FIS SOC ADAPTER
UPC
02302
02303
02304
02305
02306
02308
02313
02314
02316
02322
02323
02328
02330
02332
02334
02335
02343
02345
02346
02348
02351
02355
02359
UPC
01304
02052
02058
02060
02062
CAT. NO.
(100 PACK)
SCAPC-SOC-100
SCUPC-SOC-100
SC62-SOC-100
SC50-SOC-100
SCOM3-SOC-100
SCOM4-SOC-100
FCAPC-SOC-100
FCUPC-SOC-100
FC62-SOC-100
FC50-SOC-100
FCOM3-SOC-100
FCOM4-SOC-100
STUPC-SOC-100
ST62-SOC-100
ST50-SOC-100
STOM3-SOC-100
STOM4-SOC-100
LCAPC-SOC-100
LCUPC-SOC-100
LC62-SOC-100
LC50-SOC-100
LCOM3-SOC-100
LCOM4-SOC-100
UPC
02360
02361
02364
02365
02368
02371
02372
02377
02378
02379
02381
02384
02385
02386
02387
02388
02389
02390
02395
02397
02398
02399
02400
DESCRIPTION
SC/APC Singlemode, Green 900µm Boot
SC/UPC Singlemode, Blue 900µm Boot
SC/PC 62.5µm Multimode (OM1), Beige 900µm Boot
SC/PC 50µm Multimode (OM2), Black 900µm Boot
SC/PC 50µm Multimode (OM3), Aqua 900µm Boot
SC/PC 50µm Multimode (OM4), Aqua 900µm Boot
FC/APC Singlemode, Green 900µm Boot
FC/UPC Singlemode, Blue 900µm Boot
FC/PC 62.5µm Multimode (OM1), Beige 900µm Boot
FC/PC 50µm Multimode (OM2), Black 900µm Boot
FC/PC 50µm Multimode (OM3), Aqua 900µm Boot
FC/PC 50µm Multimode (OM4), Aqua 900µm Boot
ST/UPC Singlemode, Blue 900µm Boot
ST/PC 62.5µm Multimode (OM1), Beige 900µm Boot
ST/PC 50µm Multimode (OM2), Black 900µm Boot
ST/PC 50µm Multimode (OM3), Aqua 900µm Boot
ST/PC 50µm Multimode (OM4), Aqua 900µm Boot
LC/APC Singlemode, Green 900µm Boot
LC/UPC Singlemode, Blue 900µm Boot
LC/PC 62.5µm Multimode (OM1), Beige 900µm Boot
LC/PC 50µm Multimode (OM2), Black 900µm Boot
LC/PC 50µm Multimode (OM3), Aqua 900µm Boot
LC/PC 50µm Multimode (OM4), Aqua 900µm Boot
DESCRIPTION
AFL/Fujikura SOC Adapter
Furakawa/Fitel SOC Adapter
Sumitomo SOC Adapter
Inno SOC Adapter
FIS Super Cougar SOC Adapter
www.greenlee.com
317
COMMUNICATIONS
FIBER PRODUCTS
930XC Handheld Singlemode OTDR
CAT. NO.
930XC-20C UPC SC
930XC-20C UPC FC
930XC-20C UPC ST
930XC-20C APC SC
930XC-20C APC FC
930XC-30P UPC SC
930XC-30P UPC FC
930XC-30P UPC ST
930XC-30P APC SC
930XC-30P APC FC
930XC-30F UPC SC
930XC-30F UPC FC
• Up to 38 db dynamic range
• Large backlight LCD display
• Measure length and defects of coiled fiber
• Fiber analysis software for data management
and report generation
• 1625 nm operation for live fiver testing
• RS-232/USB interface
• Economical
• Compact handheld design
• Easy to use
• Fast automated testing
• NiMH batteries for 8 hours continuous use
Fiber Type
Selectable Ranges (km)
02621
930XC-30F APC SC
930XC-30F APC FC
930XC-20M PC FC
930XC-20M PC SC
930XC-20M PC ST
19249
19250
25688
25689
25690
946
948
60571
60692
Cleaning Wand 10/PK
REEL Cleener CONN Cleaner (948)
20988
20989
20988
Soft Carrying Case
20989
20990
RS-232 Cable
AC-CONN-FC-L2
AC-CONN-ST-L2
AC-CONN-SC-L2
AC-ADPT-20-UNIV
930XC-QR
930XC-20C
89882
89872
89877
89892
89887
19237
19238
19239
19240
02618
19247
19248
1155-0526
20996
20997
20998
25691
25692
20999
10582
930XC-SM-MM
02729
20999
SINGLEMODE SPECIFICATIONS
Wavelength (± 20nm)
Dynamic Range (dB)
Event deadzone (m)
Attenuation Deadzone (m)
Emitter Type
Pulsewidth (ns)
930XC-30F UPC ST
DESCRIPTION
Handheld OTDR, 1310/1550 nm, SC/UPC
Handheld OTDR, 1310/1550 nm, FC/UPC
Handheld OTDR, 1310/1550 nm, ST/UPC
Handheld OTDR, 1310/1550 nm, SC/APC
Handheld OTDR, 1310/1550 nm, FC/APC
Handheld OTDR, 1310/1490/1550 nm, SC/UPC
Handheld OTDR, 1310/1490/1550 nm, FC/UPC
Handheld OTDR, 1310/1490/1550 nm, ST/UPC
Handheld OTDR, 1310/1490/1550 nm, SC/APC
Handheld OTDR, 1310/1490/1550 nm, FC/APC
Handheld OTDR, 1310/1550/1625 nm, SC/UPC
Handheld OTDR, 1310/1550/1625 nm, FC/UPC
Handheld OTDR, 1310/1550/1625 nm, ST/UPC
Handheld OTDR, 1310/1550/1625 nm, SC/APC
Handheld OTDR, 1310/1550/1625 nm, FC/APC
Handheld OTDR, 850/1300 nm, FC/PC
Handheld OTDR, 850/1300 nm, SC/PC
Handheld OTDR, 850/1300 nm, ST/PC
20990
UPC NO.
930XC-30F
USB Cable for OTDR
FC Connector (for UPC & APC)
ST Connector (for UPC only)
SC Connector (for UPC & APC)
Power Supply Universal
Quick Reference Guide - UN
NiMH Battery (9.6V)
Car Adapter
OTDR Kit - Single and Multimode OTDR Kit.
930XC-30P
1310/1550/1625
1310/1490/1550
38
38
1.5
2.5
10
14
Laser
5, 10, 30, 100, 300, 1 us, 2.5 us, 10 us, 20 us
930XC-20M
1310/1550
35
2.5
14
0.3/1.3/2.5/5/10/20/40/80/120/160/240
Average Time
Distance measurement accuracy
Connector Type
800/1300
18/22
7
20
LED
12/30/100/275/1us (850nm)
30/100/275/1us/2us (1300nm)
0.1/0.3/0.5/1.3/2.5/5/10 (850nm) 0.1/0.3/0.5/1.3/2.5/5/10
/20/40/80 (1300nm)
15s/30s/1 min/2 min/3 min
±(1m + 5 X 10-5 x distance + sampling space)
UPC or APC (interchangeable FC, SC, ST)
Visual Fault Locator
Wavelength
Peak power output
Connector interface
650 nm
-3 dBm
(interchangeable FC, SC, ST)
Fiber Analysis Software
Reflection detect accuracy
Attenuation detect accuracy
Measurement data storage
Data transmission
±4 dB
±0.05 dB/dB
1,000 test curves
RS-232/USB port
General
Power Supply
Battery Life
Operating Temperature
Storage Temperature
Relative Humidity
Weight
Dimensions
NiMH chargeable battery/AC adapter
Support over 8 hours operating on one charge or over 20 hours standby
-10° to 50° C
-20° to 60° C
0 to 95% (non-condensing)
1.9 lbs. (0.87 kg)
7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)
TRUSTED
318
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Fiber Identifier
• Non-intrusive low insertion loss prevents alarm conditions
• Identifies fiber with tone detect and a clear indication of signal
transmission direction
• Supports all common fibers including 250μm, 900μm, 2mm, and
3mm and is able to sense light in bend insensitive fibers
SPECIFICATIONS
Identified Wavelength Range
800-1700nm
Identified Signal Type
270Hz ±5%, 1kHz ±5%, 2kHz ±5%
Detector Type
1mm InGaAs
Ø0.25 (Applicable for Bare Fiber)
Ø0.9 (Applicable for Ø0.9 Cable)
Adapter Types
Ø2.0 (Applicable for Ø2.0 Cable)
FI-100
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Dimensions
Weight
Certifications
-10 ° C to +60° C
-25° C to +70° C
14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)
120 g (4.2 oz.) with batteries
CE, FCC, WEEE
Ø3.0 (Applicable for Ø3.0 Cable)
Signal Indication
Left & Right LED
Signal Direction Test Range
(CW/0.9mm fiber)
-46 to 10dBm (1310nm)
-50 to 10dBm (1550nm)
Signal Power Test Range
(CW/0.9mm fiber)
-50 to +10dBm
Signal Frequency Display
270Hz, 1kHz, 2kHz
Tone Detect Test Range
(Average)
Ø0.9, Ø2.0, Ø3.0
Ø0.25
-30 to 0dBm
-25 to 0dBm
Insertion Loss
(Typical/ Maximum)
0.3 / 0.8dB at 1310nm
Battery
AAA Alkaline (2)
CAT. NO.
FI-100 Kit
FI-100-250
FI-100-900
FI-100-2MM
FI-100-3MM
FI-100-CASE
FI-100-SUNSHADE
(270Hz, 1kHz)
-25 to 0dBm (2kHz)
(1kHz, 2kHz)
-20 to 0dBm (2kHz)
1.5 / 2.5dB at 1550nm
UPC NO.
03353
03354
03355
03356
03357
03358
03359
DESCRIPTION
Fiber Identifier Kit
250µm Adapter
900µm Adapter
2mm Adapter
3mm Adapter
Soft Carry Case
Sun Shade
www.greenlee.com
319
COMMUNICATIONS
FIBER PRODUCTS
180XL Visual Fault Locator
• The 180XL can be used to confirm fiber continuity on fibers up
to 7km in length
• A 1.25mm adapter is available
• Has up to 80 hours of operation
• Ruggedized design - not made of plastic
• Class 2 for safe operation - 1mW output power
• 650nm propagates more efficiently than 635nm in single mode fiber
SPECIFICATIONS
Wavelength
Output Power
Maximum Distance
Laser Classification
Bulkhead
180XL
Battery
Battery Life
Weight
650nm +/-10nm
0dBm (1mW)
7km
2
2.5mm Universal
1.25mm adapter available
AA (2)
80 hours
120 g (not including batteries)
Dimensions
180mm x 15mm (diameter)
CAT. NO.
180XL
UPC NO.
84501
DESCRIPTION
Visual Fault Finder
Fiber Cleaning Pens - 1.25mm & 2.5mm
• Cleans 2.5mm & 1.25mm ferrules and bulkheads
• Compact, easy-to-use single click operation
• Rated for 800 cleaning cycles
• Anti-static design prevents secondary contamination
SPECIFICATIONS
Ferrule & Connector Sizes
Weight
Dimensions
Working Temperature
Storage Temperature
FCP-1.25mm
FCP-2.5mm
TRUSTED
320
SINCE
1862
CAT. NO.
UPC NO.
FCP-1.25
FCP-2.5
03577
03576
1.25mm & 2.5mm
1 oz (20g)
7.1" x 0.7" x 0.7" (180mm x 18mm x 18mm)
-10ºC to +50ºC
-30ºC to +70ºC
DESCRIPTION
1.25mm Cleaning Pen
2.5mm Cleaning Pen
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Optical Light Sources
• Durable and compact
• Provides a stable light source
• Interfaces to all industry standard connectors
SPECIFICATIONS
Wavelength
Output power
Laser Classification
GDLS 350
GDLS 355 / GDLS 360
850nm &
1300nm LED
- 20dBm Typical
1310nm, 1550nm Laser/
1490nm, 1625nm Laser
-4dBm Typical
Spectral Width
N/A
Class 1 (FDA 21 CFR1040.11)
+/- 0.05dB, 1 hour, + /- 0.03dB
long after 15 minute warm-up
40nm/120nm
5nm/5nm
Optical interface
Universal Connector Interface (FC, SC, ST & LC )
Output stability
Power on
GDLS 350
Push button ON, Auto shutoff
Tone Output
2kHz
Dimensions
6.1 x 0.94 x 0.75in (15.5 x 2.38 x 1.90cm)
Weight
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Weight
-10 ° C to +50° C
-30° C to +60° C
3 oz (85g)
3oz (85g)
Operating Temperature
-10C to 50°C
Storage Temperature
-30C to 60°C
CAT. NO.
Optical Light Sources
GDLS 350
GDLS 355
GDLS 360
78-0160-70
Connector Options
GAC 022B
GAC 023B
GAC 024B
GAC 025B
UPC NO.
DESCRIPTION
00518
00519
03203
21033
850/1300 Dual LED
1310/1550 Dual Laser
1490nm/1625nm Dual Laser
Single Instrument pouch
00440
00441
00442
00443
SC Adapter for source
FC Adapter for source
ST Adapter for source
LC Adapter for source
Note: SC Adapter included with all laser and LED sources
www.greenlee.com
321
COMMUNICATIONS
FIBER PRODUCTS
Optical Power Meter
• Singlemode and multimode application
• Calibrated wave lengths of 850nm, 1310nm, 1490nm, and 1550nm
• Data transfer via USB for the GRP 460
• 2kHz Tone detect
• NIST traceable
• Long Battery Life
GRP 450-02
GRP 460-02
Ge
SPECIFICATIONS
Diode
Wavelength range
GRP 450-04
GRP 460-04
Filtered InGaAs
850nm to 1625nm
Measurement range
+ 3 to – 60dBm
Resolution
Absolute accuracy∆
+/- 0.25dB
Universal 2.5mm (Order 1.25mm or screw on
adaptors separately)
2kHz Incoming signal, Audible Alert
Optical interface
Tone identification
GRP460
Power on
Push button ON, Auto shutoff
Storage
Store up to 1000 measurements per wavelength*
Data transfer
Mini USB Port (1000 points/wavelength)*
Dimensions
6.1 x 0.94 x 0.75 in (15.5 x 2.38 x 1.90cm)
Weight
CAT. NO.
Optical Power Meter
GRP 450-02
GRP 450-04
GRP 460-02
GRP 460-04
78-0160-70
Connector Options:
GAC 020
GAC 021
GAC 026
GAC 027
GAC 028
GAC 029
GAC 126
GAC 540
Kit Options:
TRUSTED
322
SINCE
1862
+23 to –45dBm
0.01dB
3.0oz (85g)
UPC NO.
DESCRIPTION
00502
00505
00509
00511
21033
Germanium, 0.01dB, Zero ref set
Filtered InGaAs, 0.01dB, Zero ref set
Germanium, 0.01dB, Zero/Set Ref
Filtered InGaAs, 0.01dB,Zero ref set
Single Instrument Pouch
00525
00526
00531
00532
00533
00534
02046
02038
2.5mm Universal Adapter
1.25mm Universal Adaptor
SC Adaptor for OPM
ST Adaptor for OPM
FC Adaptor for OPM
LC Adaptor for OPM
SC/APC Adapter for OPM
OptiTap Patchcord SC/APC for OPM
GMFT-SM
03426
GMFT-MM
03429
GMFT-SM-MM
03431
Single Mode Kit
Kit includes:
1-GDLS 355 1310/1550 Dual Laser
1-GDLS 350 850/1300 Dual LED
1-GRP 460-02 Optical Power Meter
1-Soft Carry Case
Multimode Kit
Kit includes
1- GDLS 350 850/1300 Dual LED
1- GRP 460-02 Optical Power Meter
1- Soft Carry Case
Singlemode/Multimode Kit
Kit includes
1- GDLS 355 1310/1550 Dual Laser
1- GDLS 350 850/1300 Dual LED
1- GRP 460-02 Optical Power Meter
1- Soft Carry Case
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Video Inspection Scope
• Unique external focus mechanism eliminates need for “focus wheel”
• 3/4 μm scratch resolution
• Thin (less than 1” dia.) ergonomic probe design
• Quick change adapter tips for all connector styles
• 3.5 inch LCD Display
• Advanced Li Ion Battery & smart technology AC charger system
• Rugged and compact size
SPECIFICATIONS
GVIS 300-USB
FOV (Field of View)
Resolution
Light Source
Lighting Technique
Display screen size
Battery Life
Battery charge time
Size
Weight - (monitor, probe &
case)
Operating Temperature
Storage Temperature
CAT. NO.
GVIS 300 MP-USB
630μm x 440μm
¾ micron
Blue LED
Coaxial
3.5 in diagonal
8 to 10 hours continuous
3 hours
Probe – 180mm x 25mm x 19mm
Monitor – 120mm x 89mm x 32mm
0.54kg
0º to 50 ºC
-40ºC to 70 ºC
UPC NO.
00540
DESCRIPTION
GVIS 300 Monitor w/USB option, Probe, SC Bulkhead
and 2.5mm Universal Adaptor tips, battery charger,
basic cleaning kit and hard carry case
Video Inspection Scope
• Automatic PASS/FAIL analysis equipped to meet IEC 61300-3-35 USB or
Wi-Fi® streaming. Easily connects with laptops, smart phones, and tablets
• Greenlee GVIS application for analysis and reporting
• Unique external focus system and enhanced magnification produce clear
high-definition images
SPECIFICATIONS
Resolution
Light Source
Lighting Technique
Live - 800μm x 600μm
Enlarge - 485μm x 365μm
Magnify and center - 485μm x 365μm
<1 micron
White LED
Coaxial
Size (Probe)
Probe – 180mm x 25mm x 19mm
Weight - (Probe(
102 g
Operating Temperature
0º to 50 ºC
Storage Temperature
-40ºC to 70 ºC
FOV (Field of View)
GVIS 400
CAT. NO.
GVIS 400-HDP
UPC NO.
03178
DESCRIPTION
GVIS 400 Probe Auto Pass/Fail with USB
www.greenlee.com
323
COMMUNICATIONS
FIBER PRODUCTS
Video Inspection Scope
• Industry leading field of view
• Transmits live images and data via Wi-Fi from the GVIS 400-HDP via GPAD 250 USB
• PASS/FAIL via GPAD 250 conforming to IEC 61300-3-35
• Compatible with Greenlee inSpec and OpTest apps for Android
• Wireless transmission of dB loss readings from the GRP 460
SPECIFICATIONS
Dimensions
Weight
Wi-Fi Connectivity
Battery
Battery Charger
Communication Distance
4.5”L x 1.5”W x 2.75”H (114 mm x 38 mm x 70 mm)
0.5 lbs (23 kg)
802.11 abgn Wi-Fi Access Point
11.1 volt lithium ion, 4 hour battery life
AC Wall pack 12.6 volt lithium ion charger
200 feet / 61 meters (GPAD 250 to wireless device)
GPAD-250
CAT. NO.
UPC NO.
GPAD-250
03179
DESCRIPTION
Wi-Fi Portable Access Device - For use with the GVIS-400 HDP
Video Inspection Scope Adapter Tips
GAC 040B
GAC 044B
GAC 048B
TRUSTED
324
SINCE
1862
CAT. NO.
UPC NO.
GAC 034B
GAC 040B
GAC 041B
GAC 042B
GAC 043B
GAC 044B
GAC 045B
GAC 046B
GAC 047B
GAC 048B
GAC 049B
GAC 050B
GAC 052B
GAC 104B
GAC 107B
GAC 109B
GAC 115B
GAC 116B
03180
03181
03182
03183
03184
03187
03188
03189
03192
03190
03191
03193
01896
03199
03202
03200
02050
02051
DESCRIPTION
E2000 Adapter GVIS
SC Adapter GVIS
SC/APC Adapter GVIS
FC Adapter GVIS
FC/APC Adapter GVIS
LC Adapter GVIS
LC/APC Adapter GVIS
ST Adapter GVIS
MTP/APC Adapter GVIS
1.25mm Universal Adapter GVIS
2.5mm Universal Adapter GVIS
MTP Straight Adapter GVIS
OptiTap SC/APC Adapter for GVIS
FC Adapter, 60-Degree Angled GVIS
SC Adapter, 60-Degree Angled GVIS
LC Adapter, 60-Degree Angle GVIS
2.5mm APC Adapter for GVIS
1.25mm APC Adapter for GVIS
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
SensoLITE® Light Detector
510XL
• Detects visible and invisible light wavelengths (630 nm to 1600 nm)
• Saves time and eliminates guesswork
• Simple, durable, and easy to use
• Works with bare and connectorized fibers
• Accepts all fiber and most connector types
• Wide sensitivity range: from -55 dBm to +25 dBm
• Presence of light indicated by an audible signal and an illuminated front
panel LED
• Unique design permits testing in bright ambient light conditions
• Long battery life—up to one year of normal use
• Low battery indicator
• Replaceable light blocking curtain
SPECIFICATIONS
Promotes workplace safety – can help prevent accidental eye exposure
to hazardous laser radiation when used as directed
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
-15° C to +55° C
-25° C to +70° C
0 to 90% RH, non-condensing
14.2 x 4.3 x 3.3 cm (5.6 x 1.7 x 1.3 in.)
120 g (4.2 oz.) with batteries
OPTICAL
Center Wavelength
Detector
Optical Interface
Sensitivity
630nm
850nm
1300nm
1550nm
< -40 dBm
< -55 dBm
< -55 dBm
< -55 dBm
Output Indicators
Light > -40dBm
Battery test
Power Requirements
CAT. NO.
510XL
630 nm to 1600 nm
PIN-type germanium
Direct connection to bare or connectorized fibers; No specialized adapters required
UPC NO.
00024
Amber LED/audible signal
Green LED
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
DESCRIPTION
Visual Fault Finder
www.greenlee.com
325
COMMUNICATIONS
FIBER PRODUCTS
Fiber Optic Power Meter
• Easy to use - three buttons control all functions
• Loss measurements in (dB); power measurements in (dBm).
• 0.01 dB measurement resolution
• Multi-wavelength storage - store and recall reference power levels
for faster, more efficient measurements
• Snap-On connector interface adapts to FC, SC and ST connectors.
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
UPC NO.
560XL
T1062
T1020
T1030
560XL
Fiber Optic Power Meter
SC/PC UCI Adapter
FC/PC SOC Adapter
ST/PC SOC Adapter
SPECIFICATIONS
OPTICAL
Calibration Wavelengths
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
DESCRIPTION
84485
60575
60576
60577
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Power Range
Accuracy
Linearity
+3dBm to -3dBm
-3dBm to -50dBm
-50dBm to -60dBm
Resolution
Power Requirements
Connector interface
850 nm, 1300 nm,
1310 nm and 1550 nm
+3 dBm to -60 dBm
± 0.25 dB
±0.5 dB
±0.5 dB
±0.5 dB
0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
FC, SC or ST SOC Adapter
Silicon Fiber Optic Power Meter
• Easy to use - three buttons control all functions
• Loss measurements in (dB); power measurements in (dBm)
• 0.01 dB measurement resolution
• Snap on connector interface adapts to FC, SC and ST connectors. Contact
Greenlee for other available adapters.
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
UPC NO.
567XL
567XL
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
TRUSTED
326
SINCE
1862
00025
DESCRIPTION
XL fiberTOOLS® - Silicon Fiber Optic Power Meter
SPECIFICATIONS
OPTICAL
Detector Type
Calibration Wavelengths
Power Range
Accuracy
Linearity at:
Resolution
Power Requirements
Connector Interface
3 x 3.5 mm Silicon
635 nm, 780 nm, and 850 nm
+3 dBm to -60 dBm
±0.25 dB
+3 dBm to -3 dBm
±0.5 db
-3 dBm to -50 dBm
±0.05 db
-50 dBm to -60 dBm
±0.5 db
0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
SOC
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
High Intensity Fiber Optic Power Meter
568XL
• Easy to use - three buttons control all functions
• Multi-Wavelength Storage: Store and recall reference power levels for
faster, more efficient measurements
• 0.01dB measurement resolution
• Loss measurements in (dB); power measurements in (dBm)
• Snap on connector interface adapts to FC, SC and ST connectors; Contact
Greenlee for other available adapters
• Long battery life
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
UPC NO.
568XL
00026
DESCRIPTION
XL fiberTOOLS® - High Intensity Optic Power Meter
SPECIFICATIONS
OPTICAL
Detector Type
Calibration Wavelengths
Power Range
SPECIFICATIONS
Environmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011, Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Linearity at:
(1310nm and 1550nm)
Absolute Accuracy
Wavelength Dependence
Polarization Dependence
Resolution
Power Requirements
Connector Interface
2 mm indium-arsenide (InGaAs)
980 nm, 1310 nm, and 1550 nm
+25 to -30 dBm (1310 nm and 1550 nm);
+25 to -27 dBm measurement range at 980 nm.
To avoid thermal damage, limit exsposure high
power (greater than +23 dBm) to less than
30 minutes.; +25 to -27 dBm (980 nm only)
+25 dBm to +22 dBm
±1.0 dB
+22 dBm to +18 dBm
±0.5 dB
+18 dBm to +10 dBm
±0.2 dB
+10 dBm to -30 dBm
±0.05 dB
±0.25dB at calibration conditions
975 to 985 nm
0.025 dB/nm
1270 to 1330 nm
0.0033 dB/nm
1500 to 1625 nm
0.0016 dB/nm
<0.1 dB
±0.01 dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
SOC
www.greenlee.com
327
COMMUNICATIONS
FIBER PRODUCTS
850/1300 nm LED Source
• 850/1300 nm wavelengths
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Fixed connector interface FC, SC or ST
• Long battery life - approx. 80 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
570XL-FC
CAT. NO.
UPC NO.
570XL-FC
570XL-SC
570XL-ST
84486
84487
84488
DESCRIPTION
850/1300 nm LED source w/FC interface
850/1300 nm LED source w/SC interface
850/1300 nm LED source w/ST interface
SPECIFICATIONS
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
OPTICAL
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output
100/140um
62.5/125um
50/125um
Modulation frequency
Power Requirements
850 nm
840 nm to 880 nm
60 nm
±0.05 dB
1300 nm
1270 nm to 1345 nm
150 nm
±0.05 dB
-20 dBm
-21 dBm
-121dBm
-20 dBm
-20 dBm
-21 dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 40 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
FC, SC or ST
650 nm LED Source for Large Core Plastic and Glass Fiber
• 650 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• ST connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
573XL-ST
573XL-UNIV
UPC NO.
00023
00598
DESCRIPTION
650NM LED source w/ST interface
650NM LED source w/UCI interface
573XL-ST
SPECIFICATIONS
OPTICAL
Center Wavelength
Range (Typical)
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
Max. Spectral Width (FWHM)
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
TRUSTED
328
SINCE
1862
Stability (1 hour)
Power Output into
MM 200/300 SI Fiber
Modular Frequencies
Power Requirements
Connector Interface
650 nm
630 nm to 670 nm
40 nm
±0.05 dB
-15 dBm ±0.5 dB
270 kHz, 1 kHz and 2 kHz ±0.5 dB
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
ST
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
850 nm LED Source with AS-100 Launch Condition using 100/140 Fiber
• 850 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
UPC NO.
577XL AS100
APC-108
ATS-108
ASC-108
577XL AS100
00029
60572
60573
60574
DESCRIPTION
850 nm LED source w/AS100 Launch
FC/PC UCI Adapter
ST/PC UCI Adapter
SC/PC UCI Adapter
SPECIFICATIONS
OPTICAL
Center Wavelength
Range (Typical)
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Max. Spectral Width (FWHM)
Stability (1 hour)
Launch Profile
Power Output into MM 100/140
GI fiber
Modular Frequencies
Power Requirements
Connector Interface
850 nm
840 nm to 880 nm
<55 nm
±0.05 dB
AS100
-13 dBm ±0.5 dB
270 kHz, 1 kHz and 2 kHz ±5%
Two AA size 1.5V batteries
(approx. 24 hours continuous operation)
Universal connector interface, physical contact (UCI-PC)
1300 nm LED Source with M90 Launch Condition using 62.5/1.25 Fiber
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1: 1992;
EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
SPECIFICATIONS
OPTICAL
Center Wavelength
Range (Typical)
• 850 nm wavelength
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Universal connector interface
• Long battery life - approx. 24 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
CAT. NO.
578XL-M90
APC-108
ATS-108
ASC-108
UPC NO.
00753
60572
60573
60574
DESCRIPTION
LED Source 1300 NM, 62.5/1.25 Fiber
FC/PC UCI Adapter
ST/PC UCI Adapter
SC/PC UCI Adapter
1300 nm
150 nm
Max. Spectral Width (FWHM)
<55 nm
Stability (1 hour)
±0.05 dB
Launch Profile
M90
Power Output into MM 62.5/125 -20 dBm
GI fiber
Modular Frequencies
270 kHz, 1 kHz and 2 kHz ±5%
Power Requirements
Two AA size 1.5V batteries
(approx. 24 hours continuous
operation)
Connector Interface
Universal connector interface,
physical contact (UCI-PC)
www.greenlee.com
329
COMMUNICATIONS
FIBER PRODUCTS
1310/1550 nm Laser Source
• 1310/1550nm wavelengths
• Stable calibrated output
• Easy to use
• Continuous wave and modulated output
• Fixed connect interface FC, SC or ST
• Long battery life - approx. 80 hours
• User selectable auto shut-off
• Rugged and splash-proof
• Economically priced
580XL-FC
CAT. NO.
UPC NO.
580XL-FC
580XL-SC
580XL-ST
84489
84490
84491
DESCRIPTION
1310/1550nm Laser source w/FC interface
1310/1550nm Laser source w/SC interface
1310/1550nm Laser source w/ST interface
SPECIFICATIONS
OPTICAL
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output (9/125)
Minimum
Typical
Modulation frequency
Power Requirements
SPECIFICATIONS
ENVIRONMENTAL
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
CDRH Laser Class
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241 g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Class 1
1310 nm
1280 nm to 1340 nm
<5 nm
±0.05 dB
1550 nm
1520 nm to 1580 nm
<5 nm
±0.05 dB
-8 dBm
-7 dBm
-8 dBm
-7 dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 40 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
FC, SC or ST
Multimode Fiber Optic Test Set
•
•
•
•
•
•
Insertion loss test set for multimode fiber
850/1300 nm loss measurements
Connector for FC, SC or ST
Rugged package design
Easy to use portable package
Economically priced
SPECIFICATIONS
5670-FC INCLUDES:
560XL Optical Power Meter
570XL-FC 850/1300 nm LED Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case
5670-SC INCLUDES:
560XL Optical Power Meter
570XL-SC 850/1300 nm LED Source w/SC Connector
SC/PC SOC Adapter
914B Carrying Case
5670-ST INCLUDES:
560XL Optical Power Meter
570XL-ST 850/1300 nm LED Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
5670-FL
TRUSTED
330
SINCE
1862
CAT. NO.
UPC NO.
5670-FC
5670-SC
5670-ST
84492
84493
84494
DESCRIPTION
Multimode Fiber Optic Test Set w/FC interface
Multimode Fiber Optic Test Set w/SC interface
Multimode Fiber Optic Test Set w/ST interface
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Singlemode Fiber Optic Test Set
•
•
•
•
•
•
Insertion loss test set for singlemode fiber
1310/1550 nm loss measurements
Connector for FC, SC or ST
Rugged package design
Easy to use portable package
Economically priced
KIT SPECIFICATIONS
5680-FC
CAT. NO.
UPC NO.
5680-FC
5680-SC
5680-ST
84495
84496
84497
DESCRIPTION
Singlemode Fiber Optic Test Set w/FC interface
Singlemode Fiber Optic Test Set w/SC interface
Singlemode Fiber Optic Test Set w/ST interface
5680-FC INCLUDES:
560XL Optical Power Meter
580XL-FC 1310/1550 nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case
5680-SC INCLUDES:
560XL Optical Power Meter
580XL-SC 1310/1550 nm Laser Source w/SC Connector
T1062 SC/PC SOC Adapter
914B Carrying Case
5680-ST INCLUDES:
560XL Optical Power Meter
580XL-ST 1310/1550 nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
Multimode and Singlemode Fiber Optic Test Set
• Insertion loss test set for multimode and singlemode fiber
• 850/1300 nm Loss measurements
• 1310/1550 nm Loss measurements
• Connector for FC, SC or ST
• Rugged package design
• Easy to use portable package
• Economically priced
KIT SPECIFICATIONS
5890-FC
5890-FC INCLUDES:
560XL Optical Power Meter
570XL-FC 850/1300 nm LED Source w/FC Connector
580XL-FC 1310/1550 nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
915B Carrying Case
5890-SC INCLUDES:
560XL Optical Power Meter
570XL-SC 850/1300 nm LED Source w/SC Connector
580XL-SC 1310/1550 nm Laser Source w/SC Connector
T1062 SC/PC SOC Adapter
915B Carrying Case
5890-ST INCLUDES:
560XL Optical Power Meter
570XL-ST 850/1300 nm LED Source w/ST Connector
580XL-ST 1310/1550 nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
915B Carrying Case
CAT. NO.
UPC NO.
5890-FC
5890-SC
5890-ST
84498
84499
84500
DESCRIPTION
Multimode and Singlemode Fiber Optic Test Set w/FC interface
Multimode and Singlemode Fiber Optic Test Set w/SC interface
Multimode and Singlemode Fiber Optic Test Set w/ST interface
www.greenlee.com
331
COMMUNICATIONS
FIBER PRODUCTS
525N-30 Smart Optical Loss Test Set
• Automated dual cable testing
• Optical return loss measurements
• Dual wavelength insertion loss measurements
• Multi-mode and Single-mode models feature user settable
PASS/FAIL thresholds
• Communications between units via messaging
• Wide dynamic range optical power meter
• Test record storage and data management software
• Rugged outside plant instrument package
• Universal connector interface
525N-30-FC
CAT. NO.
UPC NO. DESCRIPTION
525N-30-FC
525N-30-SC
525N-30-ST
00891
00892
00893
850/1300nm Smart Optical Loss Test Set - FC interface
850/1300nm Smart Optical Loss Test Set - SC interface
850/1300nm Smart Optical Loss Test Set - ST interface
525N-30-XX
SPECIFICATIONS
Instrument Type
Singlemode Smart Loss Test Set
Interface
Connector
AUTOTEST
measurements
PC Connector Interface AUTOTEST
performs
Insertion Loss Test and Manual Return
Loss
POWER METER
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310, 1550, 1480, 1625 nm
<±0.25 dB
0.01 dB
Measurement Units
dBm, dB
SOURCE SPECIFICATIONS
Center Wavelength
Spectral Width
Output Power
Output Stability
850 nm ±30 nm
1300 nm ±30 nm
<170
>-21 dBm
<170
>-21 dBm
<±0.10 dB/8 hrs
<±0.10 dB/8 hrs
AUTOTEST INSERTION LOSS SPECIFICATIONS
Test Port Measurement Range
Calibrated Wavelengths
25 dB
850, 1300 nm
GENERAL DESCRIPTIONS
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
TRUSTED
332
SINCE
1862
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm (7.6 x 4.3 x 2.3 in)
1.0 kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
525N-60 Smart Optical Loss Test Set
• Automated bi-directional testing
• Optical return loss measurements
• Dual wavelength insertion loss measurements
• Multi-mode and single-mode models feature user settable
PASS/FAIL thresholds
• Communications between units via messaging
• Wide dynamic range optical power meter
• Test record storage and data management software
• Rugged outside plant instrument package
• Universal connector interface
CAT. NO.
UPC NO.
525N-60-ST
525N-60-FC
525N-60-ST
525N-60-SC
00896
00894
00895
DESCRIPTION
1310/1550 nm Smart Optical Loss Test Set - PC Connectors
1310/1550 nm Smart Optical Loss Test Set - PC Connectors
1310/1550 nm Smart Optical Loss Test Set - PC Connectors
525N-60-XX
SPECIFICATIONS
Instrument Type
Singlemode Smart Loss Test Set
Interface
Connector
AUTOTEST
measurements
PC Connector Interface AUTOTEST
performs
Insertion Loss Test and Manual Return
Loss
POWER METER SPECIFICATIONS
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
InGaAs
+10 dBm to -70 dBm
850, 980, 1300, 1310, 1550, 1480, 1625
±0.25 dB
0.01 dB
Measurement Units
Adapter Type
dBm, dB, W
UCI-UPC flat polish adapter 9/125SM
SOURCE SPECIFICATIONS
Center Wavelength
Spectral Width
Output Power
Output Stability
1310 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
1550 nm ±30 nm
<5
>-10 dBm
±0.15 dB
8 hours
AUTOTEST INSERTION LOSS SPECIFICATIONS
Test Port Measurement Range
Calibrated Wavelengths
40 dB
1310, 1550 nm
RETURN LOSS SPECIFICATIONS
Measurement Range
Accuracy
10 to 45 dB
.5 dB
GENERAL DESCRIPTIONS
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0 kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
www.greenlee.com
333
COMMUNICATIONS
FIBER PRODUCTS
Connector Cleaning Systems
• Special lint-free fabric-on-a-reel quickly cleans ferrule endfaces of dust,
oil and other contaminants
• Cleaning system is completely self-contained
• No need for alcohol
• A single cleaning reel can be used for over 400 ferrule cleanings
•ReelCleaner™ can be used on all connector types including
MTP and MT-RJ
948
CAT. NO.
948
948/2
945/ESD/1
UPC NO.
60692
10792
24053
DESCRIPTION
ReelCleaner™ Connector Cleaning System
Reel Set, 2/Package
Reel Set, 1/Package
Adapter Cleaning Wands
• Specially-created, lint-free materials clean hard-to-reach fiber optic
interfaces, bulkhead adapters and ferrule alignment sleeves
CAT. NO.
946
946/K
947
947/K
946
TRUSTED
334
SINCE
1862
UPC NO.
60571
60689
60690
60691
DESCRIPTION
2.5 mm Cleaning Wands, 10/Package
2.5 mm Cleaning Wands, 200/Box
1.25 mm Cleaning Wands, 10/Package
1.25 mm Cleaning Wands, 200/Box
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Optical Fiber Monitors
OFM1020
• mm Resolution
• Zero Deadzone
• 90dB Return loss dynamic range
• 850/1300 nm operation
• Measure optical components, cables and sensors.
• Monitor bend loss and fiber stress
• Universal optical interface
• Ruggedized for field deployment
• AC/DC operation
• Custom configurations available (fiber, outputs, wavelengths)
OFM1020
OFM130
• mm Resolution
• Zero Deadzone
• 85dB Return loss dynamic range
• 1310/1490/1550/1625 nm operation
• Measure optical components, cables and sensors
• Analyze optical amplifiers
• Monitor bend loss and fiber stress
• Custom configurations available (fiber, outputs, wavelengths)
CAT. NO.
OFM130
UPC NO.
DESCRIPTION
Please consult with a customer service representative
for ordering details. (800) 642-2155
SPECIFICATIONS
Fiber Type
Distance
OFM1020
Range
Accuracy
Single Point Resolution
Two Point Resolution
OFM130
0-20 km (65,000 ft.)
0.02% + 2.5cm (1")
5 mm (0.2")
10 cm (4")
Deadzone
Event
Attenuation
12 cm typical (5")
38 cm typical (15")
Return Loss
Dynamic Range
Accuracy
90dB
±1.0dB
Insertion loss, fresnel
Dynamic Range
Accuracy
40dB
±0.3dB
Insertion loss, rayleigh
Dynamic Range
Accuracy
20dB
±0.02 dB
Wavelength
Accuracy
40 nm
Spectral Width
20 nm
Mechanical
Size
Weight
36 cm x 48 cm x 20 cm
(14.2"x18.9"x7.9")
11 kg (24 lb.)
35 cm x 39 cm x 20 cm
(13.8"x15.3"x7.9")
9.5 kg (21 lb.)
Power
AC
DC
24V
110/220V, 60/400Hz
n/a
www.greenlee.com
335
COMMUNICATIONS
FIBER PRODUCTS
Fiber Optic Instrument Adapters – SOC and UCI
• Our SOC and UCI adapters provide direct connectivity for
Tempo fiberTOOLS® to a wide range of industry-standard fiber
optic ­connectors
• Adapter design ensures maximum accuracy and repeatability
when performing critical measurements on fiber optic systems
• Easy to clean and use
• Single-mode and multimode compatible
• SOC adapters are compatible with both PC and Angled APC
physical contact interfaces
• UCI adapters feature durable phosphor bronze alignment sleeve
• SOC (Snap-On Connector) adapter is used on all power meters
and 250 “B” series LED Sources
• UCI (Universal Connector Interface) adapter is used on all 250/260
“A” Series Sources and 330 Series Variable Optical Attenuators
Fiber Optic Instrument Adapters – SOC and UCI
CONNECTOR TYPE
SOC ADAPTER
DESCRIPTION
x
UPC NO.
1.25 mm Quick-Connect Universal Adapter
(LC, MU, etc.)
T1026
60588
2.5 mm SOC Quick-Connect Adapter
(E2000, FC, SC, ST, etc.)
T1025
60587
AU-250
60703
E-2000
T10E2
60599
AE2-10
60698
FC
T1020
60576
APC-108
60572
HMS-10/HP
T1040
60590
AHP-10
60699
LC
T10LC
60600
Use Hybrid Cable * or FoPro®_x
MIL-T-29504/4 & /5 Termini
T1038
60589
Use Hybrid Cable * or FoPro®_x
MT-RJ
T13A2
60605
Use Hybrid Cable Only *
SC
T1062
60575
ASC-108
60574
SMA 905/906
T1087
60596
ASM-90
60702
ST
T1030
60577
ATS-108
60573
TOSLINK – Simplex
T10TB
60602
Use Hybrid Cable Only *
Versatile Link – V/Z PIN
T10ZP
60604
Use Hybrid Cable Only*
FoPro ferrule options include 2.5 mm, 1.57 mm (MIL-style 16AWG optical contacts) and 1.25 mm.
When using a Hybrid Adapter Cable, the instrument UCI adapter and one end of the Hybrid
Adapter Cable should be a commonly available connector type. (i.e. FC, SC or ST)
*
TRUSTED
336
UCI ADAPTER
CAT. NO.
SINCE
1862
CAT. NO.
UPC NO.
Use Hybrid Cable Only *
90SOC (60687)
SOC adapter tool for
easy installation and
removal of SOC adapters
from instrument interfaces.
(Product shown may vary)
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
FIBER OPTIC HAND TOOLS
ProGrip 5-in-1 Fiber Optic Stripper
• Precision ground stripping cavities for:
– 2.0 - 2.4 mm outer jacket
– 2.0 - 3.0 mm loose tube
– 2.8 - 3.0 mm outer jacket
– 900 µm buffer insulation
– 900/125 µm and 250/125 µm buffer/acrylate
• Factory calibrated
PA1171
CAT. NO.
DESCRIPTION
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
ProGrip 3-in-1 Fiber Optic Stripper
• Precision ground stripping cavities for:
– 2.0 mm outer jacket
– 900 µm buffer insulation
– 250 µm buffer/acrylate
• Factory calibrated
PA1177
CAT. NO.
DESCRIPTION
PA1177
ProGrip 3-in-1 Fiber Optic Stripper
Economy Kevlar® Cutter
• Cut protective Kevlar strands in fiber optic cable
• Hard-chromed serrated edges to easily cut through Kevlar
• Comfortable handles with large finger openings
• 7.75" (197 mm) long
CAT. NO.
DESCRIPTION
WEIGHT
PA1511
Economy Kevlar Cutter
2 oz
Kevlar is a registered trademark of E.I. Dupont, Inc.
PA1511
Economy Fiber Optic Stripper
PA1162
• Pre-calibrated and factory set to ensure precision
• Bright orange rubber dipped handles
• Lock closure for safety and transport
• Tool is for stripping 2.0-3.0 mm Fiber Optic cable, micron-cladded core
• 5" (127 mm) long
SPECIFICATIONS
Weight
Length
3 oz. (86 g)
5" (127 mm)
CAT. NO.
DESCRIPTION
WEIGHT
PA1162
Economy Fiber Optic Stripper
3 oz
www.greenlee.com
337
COMMUNICATIONS
FIBER PRODUCTS
Pocket Cable Stripper
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm)
• Strips solid conductor, stranded conductor and multiple
conductor cables
• Easy blade depth adjustment
• Blade rotates for circular, longitudinal and spiral cuts.
CAT. NO.
1903
1903
13544
13545
13546
UPC NO.
12679
13544
13545
13546
DESCRIPTION
Cable Stripping Tool
Replacement Blade (2 per package)
Replacement Small Hook
Replacement Large Hook
Fiber Optic Scribe
• Pen-type scribe with screw-in non-reversible carbide tip
• Wedge shaped tip
•Pocket-clip
• Stainless steel barrel
• 5.25" (197 mm)
CAT. NO.
DESCRIPTION
WEIGHT
PA1922-1
Fiber Optic Scribe
2 oz
PA1922-1
Fiber Optic Polishing Pucks
• Manufactured from aluminum with tungsten coating
• Cleaner than conventional plastic pucks because less debris left behind
• Double the lifetime of conventional plastic pucks
• Length: 7.75" (197 mm)
PA1920-1
TRUSTED
338
SINCE
1862
CAT. NO.
DESCRIPTION
WEIGHT
PA1920-1
PA1926-1
SC, ST, FC Polishing Puck
LC Polishing Puck
2 oz
2 oz
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
FIBER OPTIC KITS
Ultimate Fiber Tool Kit
This Ultimate Kit contains all the slitters, strippers, and Kevlar® cutters you
will need to start your fiber optic terminations. Also included is the premium
1600 Series Crimper with three interchangeable dies. The Ultimate Tool Bag
also has plenty of room for you to add your consumables
PA4924
CAT. NO.
DESCRIPTION
WEIGHT
PA4924
Ultimate Fiber Tool Kit
5.65 lbs
ULTIMATE FIBER TOOL KIT INCLUDES
PA1511
Kevlar® Cutter
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
PA1162
Economy Fiber Optic Stripper
PA1161
Adjustable Jacket Stripper
PA1820
AM 25 Slitter
PA1821
AM 35 Slitter
PA1258
LC CST- Mini Stripper
PA1600
1600 Series Crimp Frame
PA2044
STII Type Die Set
PA2664
SMA/SMB/FC/BICONIC Die Set
PA1922-1
Fiber Optic Scribe
PA1920-1
SC/ST/FC Polishing Puck
PA1926-1
LC Polishing Puck
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
Kevlar is a registered trademark of E.I. Dupont, Inc.
FiberReady Tool Kit
This kit contains an assortment of cable sliters, strippers and Kevlar®
cutters to prep fiber optic cable along with our 1600 Series premium
crimper with interchangeable dies
CAT. NO.
DESCRIPTION
WEIGHT
PA906001
FiberReady Tool Kit
3.1 lbs
PA906001
FIBERREADY TOOL KIT INCLUDES
PA1511
Kevlar® Cutter
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
PA1822
Universal Cable Stripper
PA1600
1600 Series Crimp Frame
PA2044
STII Type Die Set
PA2664
SMA/SMB/FC/BICONIC Die Set
N/A
Zippered Portfolio Case with Handles
Kevlar is a registered trademark of E.I. Dupont, Inc.
www.greenlee.com
339
COMMUNICATIONS
COMMUNICATIONS KITS
GripPack Quick-Release Tool Holster
• Easy-on, easy off with new quick-release belt clip
• Belt clip swivels so the holster moves with you and the
tools stay out of your way
• Form fitted PVC material ensures that tools don’t fall out even if you drop your kit or they are upside down
• Molded specifically to hold the following Greenlee Communications Tools:
Data SureStrip® UTP/STP & flat satin phone cutter/stripper, Datacomm
scissors with serrated blades & ergonomic handles, Punchdown tool - either
the ergonomic SurePunch Pro or the original SurePunch PDT®, MiniMagLite® or SurePunch Pro detachable LED, and a Sharpie® marker
PA4942
CAT. NO.
DESCRIPTION
PA4940
PA4941
PA4942
PA4943
PA4946
PA4940-31
GripPack Quick-Release Tool Holster
GripPack SurePunch Pro Technician's Kit
GripPack SurePunch Pro Installer's Kit
GripPack SurePunch Technician's Kit
GripPack UTP Essentials
Replacement Belt Clip
Grip Pack Kits
DESCRIPTION
MODEL
PA4941
PA4942
PA4943
GripPack Tool Holster
PA4940
✓
✓
✓
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1116
✓
✓
✓
✓
Reversible 110/66 blade
PA4571
✓
✓
✓
✓
SurePunch Pro PDT punchdown tool handle
PA3589
✓
✓
✓
✓
✓
✓
SurePunch PDT® punchdown tool handle
PA3570
SurePunch Pro detachable LED light & batteries
PA4599
MagLite® with 2 AA batteries
N/A
✓
✓
Black Sharpie pen
N/A
✓
✓
®
PA4946
Pro COAX Tool Kit
Designed for the professional CATV cable installer. Offers the convenience
in having six essential tools needed for coaxial repair and installation with
a unique Grip Pack Pouch
46601
CAT. NO.
46601
UPS NO.
01292
DESCRIPTION
Pro COAX Tool Kit
46601 PRO COAX TOOL KIT INCLUDES
0251-08D
8" Diagonal Cutting Pliers, Dipped Grip
45591
RG59/6/6Q, RG7/11 Coaxial Cable Stripper
PA70020
RG59/6/6Q, RG7/11 Coaxial Cable Crimper
0153-42C
6-in-1 Multi-Tool (Screwdriver/Nut Driver Tool)
0354-14
Combo Ratcheting Closed and Open Ended 7/16" Wrench
FL2AAAP
LED Water Resistant Penlight
PA5000
Custom Grip Pack Pouch with Belt Clip
TRUSTED
340
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Ultimate Technician Kit
PA4932
CAT. NO.
DESCRIPTION
WEIGHT
PA4932
Ultimate Technician Kit
7.2 lbs
PA4932 ULTIMATE TECHNICIAN KIT INCLUDES
PA1179
KT8 round cable cutter
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1257
LC-CST CATV “F” coax stripper
PA1923
Untwist tool
PA1927
CATV “F” flaring & attachment tool - RG6/RG6 QS
PA1559
SealTite® Pro compression crimper
PA3589
SurePunch Pro punchdown tool
PA4599
SurePunch Pro detachable LED light
PA4572
110 blade
PA4591
Double 110 blade
PA4573
66 blade
PA4574
BIX blade
PA4575
Krone LSA blade
PA1543
LAN ProNavigator® tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 adapter
PA1900
Can wrench
N/A
(10) RJ22 handset plugs
PA9520
(10) RJ11/12 plugs, stranded, flat cable
PA9546
(10) RJ45 plugs, Cat5e, solid, round cable
PA9644
(10) CATV “F” RG6/RG6 QS connectors
PA901074
(2) BNC-to-CATV “F” adapters
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Ultimate Premise Service Kit
This kit is designed for today’s on-the-go LAN professional. It provides
all the tools and testers you need to maintain your data, voice and video
networks all in our Ultimate Tool Bag that’s always ready
PA4933
CAT. NO.
DESCRIPTION
WEIGHT
PA4933
Ultimate Premise Service Kit
6.1 lbs
PA4932 ULTIMATE PREMISE SERVICE KIT INCLUDES
PA1179
KT8 round cable cutter
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1257
LC-CST CATV “F” coax stripper
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch Pro punchdown tool
PA4572
110 blade
PA4573
66 blade
PA1543
LAN ProNavigator® tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 adapter
PA901074
(2) BNC-to-CATV “F” adapters
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Die Sets:
PA2062
Die Sets: RJ11/12 WE/SS-style
PA2687
Die Sets: RJ45 WE/SS-style & RG6/RG6 QS CATV “F”
www.greenlee.com
341
COMMUNICATIONS
COMMUNICATIONS KITS
Ultimate Coax Compression Tool Kit
This kit is for installing home theaters, HDTV, satellite and digital
cable TV systems. It contains everything needed for new home
construction or retrofitting sophisticated A/V solutions
CAT. NO.
DESCRIPTION
WEIGHT
PA4939
Ultimate Coax Compression Tool Kit
8.25 lbs
PA4939 ULTIMATE COAX COMPRESSION TOOL PRO KIT INCLUDES
PA1821
AM 35 Slitter
PA1179
KT8 Cutter
PA1119
UTP/Coax Cutter/Stripper
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN Cassette
PA2281
CST Pro OG – Kings & Amphenol BNC
PA2282
CST Pro BK – ADC, Amphenol HDTV BNC
PA2283
CST Pro BL – CATV “F”
PA2284
CST Pro Rollers
PA1927
CATV “F” Flaring & Insertion Tool
PA1557
SealTite® Pro Compression Crimper
PA1907
BNC Extraction Tool
PA1908
CATV “F” Extraction Tool
PA1594
LAN & A/V Cable-Check™ Tester
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
PA9645
(50) SealTite™ CATV “F” – RG59
PA9720
(10) SealTite™ RCA – RGX
PA9730
(10) SealTite™ BNC – RGX
PA906002
(30) Connector & Adapter Assortment Pack
PA4939
Ultimate DataReady® Pro Kit
If you’re an installer or technician needing a data cable tool kit solution,
this is it. It includes all the tools you need for Cat5, Cat5e and Cat6
installation or maintenance in our rugged Ultimate Tool Bag
DESCRIPTION
WEIGHT
PA4934
Ultimate DataReady® Pro Kit
5.15 lbs
PA4932 ULTIMATE DATAREADY® PRO KIT INCLUDES
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist tool
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch Pro punchdown tool
PA4599
SurePunch Pro detachable LED light
PA4571
110/ 66 blade
PA4591
Double 110 blade
PA1543
LAN ProNavigator® tester & remote
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
Die Sets:
PA2061
RJ45 WE/SS-style
PA2062
RJ11/12 WE/SS-style
PA2063
RJ22 handset
PA2064
RJ45 AMP-style
PA2067
RJ11 DEC-MMJ
PA4934
TRUSTED
342
CAT. NO.
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Ultimate Data/Voice Pro Kit
This complete kit is for data and voice installation and maintenance
stored in the new versatile Ultimate Tool Bag
CAT. NO.
DESCRIPTION
WEIGHT
PA4935
Ultimate Data/Voice Pro Kit
4.5 lbs
PA4935 ULTIMATE DATA/VOICE PRO KIT INCLUDES
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist tool
PA1561
All-in-One Phone/Data tool
PA3589
SurePunch Pro punchdown tool
PA4572
110 blade
PA4573
66 blade
PA4591
Double 110 blade
PA1573
Telephone Test Set & LAN Cable-Check™
PA1900
Can wrench
PA4923
Ultimate Tool Bag
N/A
Plano® plastic tackle box
PA4935
Ultimate Tool Bag
• Main compartment features removable inner tote and three additional pockets
• Removable inner tote with eight adjustable storage slots keeps
smaller tools handy
• Detachable shoulder strap with three anchor points to carry bag horizontally
or vertically
• Deep Velcro pockets holds large tools or test equipment
•Plano® divided tackle box neatly stores dies, blades & connectors
and fits into all outer pockets
• Sturdy bottom prevents bag from flopping over when sitting upright
CAT. NO.
DESCRIPTION
WEIGHT
PA4923
Ultimate Tool Bag with Plano® tackle box
2.2 lbs
PA4923
Tools and bits not included
www.greenlee.com
343
COMMUNICATIONS
COMMUNICATIONS KITS
SealTite® Pro A/V Kit
The SealTite® Pro A/V kit is all you need to make custom
length digital and analog audio and component video cables using
compression RCA, BNC and cable TV "F" connectors.
CAT. NO.
DESCRIPTION
WEIGHT
PA4915
SealTite® Pro A/V Kit
46 oz
SEALTITE® PRO A/V KIT INCLUDES
Combination UTP/Coax Data SureStrip®
PA1119
SealTite Pro Compression Crimper
PA1559
2 sets of color bands for RCA & BNC Connectors
N/A
6 BONUS RG6/RG6 QS Compression Connectors
PA9714
(2) RCA
PA9715
(2) BNC
PA9643
(2) Cable TV “F”
PA4915
SealTite® Pro Cable TV "F" Kit
Tackle all of your compression crimping jobs with the complete
SealTite® Pro Kit. Includes all the tools you need to prepare the cable
and terminate any compression connector using RG59, RG6 or RG6 Quad
shield cables
PA4910
CAT. NO.
DESCRIPTION
WEIGHT
PA4910
SealTite® Pro Kit
46 oz
SEALTITE® PRO KIT INCLUDES
PA1179
KT8 round cable cutter
PA1257
LC CST CATV “F” coax stripper
PA1917
RG6/RG6 Quad shield flaring tool
PA1559
SealTite® Pro compression crimper
N/A
RG6/RG6 Quad SealTite® connectors (10)
TRUSTED
344
SINCE
1862
= REPLACEMENT PART
= NEW PRODUCT
= ACCESSORY
B
= BARE TOOL
CoaxReady™ Compression Tool Kit
Adding to our CoaxReady™ solutions, this kit has everything you will
need to terminate any manufacturers' cable TV "F", RCA or BNC
compression connectors using RG6, RG6 Quad or RG59 cable sizes
• 12 piece kit
• Includes zippered Cordura® portfolio case
PA906003
CAT. NO.
DESCRIPTION
WEIGHT
PA906003
CoaxReady™ Compression Tool Kit
3.5 lbs
COAXREADY™ COMPRESSION TOOL KIT INCLUDES
PA1821
AM 35 Slitter
PA1179
KT8 Cutter
PA1119
Data & A/V UTP & Coax Cutter/Stripper
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN 3-Level Strip Blade Cartridge
PA2283
CST Pro OG 3-Level Strip Blade Cartridge
PA2282
CST Pro BK 3-Level Strip Blade Cartridge
PA2284
CST Pro Rollers
PA1927
CATV “F” Flaring & Insertion Tool
N/A
Zippered Cordura® Portfolio Case
CoaxReady™ Deluxe Kit
Perfect for LAN/Ethernet or video & CATV installation. For a wide variety
of coaxial connectors including mini-coax and HDTV applications,
CoaxReady™ Deluxe combines our most popular tools for a complete
coax solution in a handy zipper case
• Kit also includes terminators and adapters
PA901081
CAT. NO.
DESCRIPTION
WEIGHT
PA901081
CoaxReady™ Deluxe Kit
3 lbs
COAXREADY™ DELUXE KIT INCLUDES
PA1179
KT8 round cable cutter
PA1255
LC CST-58/59 coax stripper
PA1302
1300 crimp tool frame with EZI-CHANGE™ thumb screws
DIE SETS:
PA2034
BNC/TNC - RG58/59/62AU
PA2649
BNC/TNC - CATV “F” RG59/6/Belden 8281/1694A and 1505A
PA2653
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
CoaxReady™ Kit
With this kit a technician is set to tackle most coaxial cabling challenges
Perfect for the LAN/Ethernet or video installation installer. For a wide
variety of coaxial connectors including mini-coax applications,
CoaxReady™ combines our most popular tools with the new LC CST
coax stripper in a handy zippered case
PA901054
CAT. NO.
DESCRIPTION
WEIGHT
PA901054
CoaxReady™ Kit
2.5 lbs
COAXREADY™ KIT INCLUDES
PA1179
PA1255
PA1302
DIE SETS:
PA2034
PA2075
PA2653
KT8 round cable cutter
LC CST-58/59 coax stripper
1300 crimp tool frame with EZI-CHANGE™ thumb screws
BNC/TNC - RG58/59/62AU
BNC/TNC - RG58/59/62AU RG6 Teflon/Plenum
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
Teflon® is a registered trademark of Dupont
www.greenlee.com
345
COMMUNICATIONS
COMMUNICATIONS KITS
Telco Technician Tool Kit
CAT. NO.
PA4938
DESCRIPTION
Telco Technician Kit
WEIGHT
7.6 lbs
BROADCASTREADY® PRO KIT INCLUDES
PA1116
Data SureStrip® UTP/STP Cutter/Stripper
PA1933
Datacomm Scissors
PA3570
SurePunch Pro Punchdown Tool
PA4571
110/66 blade
PA4599
SurePunch Pro Detachable LED Light
N/A
Mini-MagLite®
N/A
Sharpie® Black Marker
PA4940
GripPack Quick Release PDT Holster
PA1561
All-in-One Phone/Data Crimp Tool
PA9655
(50) RJ45 Cat5e Modular Plugs
PA1902
RJ45 Adapter
PA1903
RJ11 Adapter
PA1573
Tone Probe Plus Cable-Check™
TM500
Butt Set
N/A
Plano® Tackle Box
PA4923
Ultimate Tool Bag
PA4938
BroadcastReady® Kit
The BroadcastReady™ Kit includes professional tools for cutting, stripping,
crimping and testing coaxial cable connections for HDTV, video and RF
communications. Protected by a padded, zipper case. Also includes a
screwdriver to change out die sets
PA901083
DESCRIPTION
WEIGHT
PA901083
BroadcastReady® Kit
3 lbs
BROADCASTREADY® PRO KIT INCLUDES
PA1179
KT8 round cable cutter
PA1280
CST Pro Coax tool
PA2280
CST Pro GRN – common connectors
PA2281
CST Pro OG – Kings & Amphenol 3-piece
PA2282
CST Pro BK – ADC, Amphenol HDTV
N/A
Screwdriver to change dies
PA1543
LAN ProNavigator® tester & remote
PA1600
1600 Series crimp frame
TRUSTED
346
CAT. NO.
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
DataComm Pro Starter Kit Max
This kit is also a starter kit for datacomm professionals
• 66 piece kit
• Includes the complete solution for cutting, crimping, and terminating
• All the tools included come in a compact zipper case
CAT. NO.
DESCRIPTION
WEIGHT
PA4908
DataComm Pro Starter Kit
1.8 lbs
DATACOMM PRO STARTER KIT INCLUDES
PA1116
Data SureStrip® UTP/STP Cutter/Stripper
PA3570
SurePunch Pro Punchdown Tool
PA4528
110 Reversible blade
PA1561
All-in-One Phone/Data Crimp Tool
PA9520
(10) RJ45 Cat5e Modular Plugs
N/A
Compact Zipper Case
PA4908
DataReady™ Pro Kit
A complete data cable installation kit providing everything to support the
installer using commonly-available connectors, and punchdown termination
blocks. All tools contained in a professional-quality, soft-sided zipper case
with heavy-duty wrist strap
PA901378
CAT. NO.
DESCRIPTION
WEIGHT
PA901378
PA9013781
DataReady™ PRO Kit
DataReady™ PRO Kit - Krone*
4 lbs
4 lbs
DATAREADY™ PRO KITS INCLUDE
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1923
Untwist Tool
PA3589
SurePunch Pro punchdown tool
PA4599
SurePunch Pro detachable LED light
PA4591
Double 110 blade
PA4571
110/ 66 blade**
PA1543
LAN ProNavigator® UTP/STP continuity tester & remote
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
DIE SETS:
PA2061
RJ45 WE/SS-style
PA2062
RJ11/12 WE/SS-style
PA2063
RJ22 handset
PA2064
DRJ45 AMP-style
PA2067
RJ11 DEC-MMJ
* Additional 110 blade included in PA9013781 Kit
** Replaced with Krone blade PA4575 (only with PA9013781 Kit)
www.greenlee.com
347
COMMUNICATIONS
COMMUNICATIONS KITS
DataReady™ Kit
The complete Category 5 datacomm tool set in a handy zipper case.
Everything needed for a CAT-5 installation except the cable
CAT. NO.
DESCRIPTION
WEIGHT
PA901053
PA9010531
DataReady™ Kit
DataReady™ Kit - AMP/Krone*†
3 lbs
3 lbs
PA901053
DATEREADY™ KITS INCLUDE
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1561
All-in-One Phone/Data tool*
PA3570
SurePunch Impact Punchdown Tool
PA4571
110/ 66 blade**
PA1576
Data Link/ID and Cable-Check™ Tester
N/A
(20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable
N/A
Zipper Case with Carrying Strap
* WE/SS - style replaced with AMP - style #1557
* * Contains 110 & Krone blades PA4575 (only with PA9010531 Kit)
† 68 spring- compression blades precisely adjust to the insulation.
Premise Service Kit
Our biggest data, voice, and coaxial LAN installation kit provides everything
for twisted pair and coaxial cable installation. All tools contained in a
professional blow-mold case complete with form-fitting foam
CAT. NO.
DESCRIPTION
WEIGHT
PA901039
PA9010391
Premise Service Kit
Premise Service Kit - AMP/Krone*
7.6 lbs
7.6 lbs
PA91039
PREMISE SERVICE KITS INCLUDE
PA1179
KT8 round cable cutter
PA1257
LC-CST CATV “F” coax stripper*
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA8000
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
PA3589
SurePunch Pro punchdown tool
PA4599
SurePunch Pro detachable LED light
PA4573
66 blade***
PA1543
LAN ProNavigator® UTP/STP continuity tester & remote
PA1573
Telephone Test Set & LAN Cable-Check™
PA1902
RJ45 8-way adapter
DIE SETS:
PA2062
RJ11/12 WE/SS-style**
PA2687
RJ45 WE/SS-style & RG6/RG6 QS CATV “F”**
* Replaced with LC CST-58/59 coax stripper PA1255
** Replaced with RJ45 AMP-style & RG58/59 BNC/TNC dies PA2034, PA2064, PA2065
*** Replaced with BIX or Krone blade #PA4575 (only with PA9010391 Kit)
TRUSTED
348
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Network Tool Bundle
This new bundle provides the perfect solution for the do-ityourselfers that want to use professional tools or for small
contractors just starting out installing networks. It includes
everything you need but the cable to get the job done
PA4909
CAT. NO.
DESCRIPTION
WEIGHT
PA4909
Network Tool Bundle
18.4 oz
PA4909 NETWORK TOOL BUNDLE INCLUDES
PA1116
Data SureStrip® UTP/STP & flat satin cutter/stripper
PA1561
All-in-One Phone & Data Tool
PA3580
Non-impact 110 punchdown
PA9546
10, RJ45 Cat5e plugs
PA9520
10, RJ11 plugs
www.greenlee.com
349
COMMUNICATIONS
COMMUNICATIONS KITS
Computer Service Kit
• 3.6V cordless screwdriver, battery & charger
• ESD wrist strap
• 30-watt soldering iron
• Desolderer & soldering aid with pick & scraper/cutter tip
• Needle nose pliers (2)
• Angled-head lead cutter
• Insulated tweezers
• Component gripper & IC extractor
• 10-piece driver socket set
• 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted,
and Square-Head
• Socket adapter/extender & socket bit holder/extender
PA4370
CAT. NO.
DESCRIPTION
WEIGHT
PA4370
Computer service kit
4.5 lbs
Cordless Screwdriver & Socket Set
• Adjustable torque up to 21.7in-lbs (2.4 N-m)
• Includes 3.6V rechargeable battery
• AC adapter/battery charger & bit holder included
• Forward/reverse direction
• One-hand operation
• Handle swings easily from pistol to rod form
• Includes 14-piece socket set: 6-12 mm; 3/16”-1/2”
• Includes 26-piece driver bits: 3 slotted, 5 Torx,
3 Phillips, 3 Robertson, 12 hex
• Accepts 1/4” bits
PA4336
SPECIFICATIONS
Weight
1.38 lbs. (.63 kg)
Length
9.52" (242 mm)
Power Requirements 3.6V NiCd battery
Battery Life
Approx. 600 cycles
Charging Time
3-6 hours
AC adapter input
120VAC 50-60Hz
No-load Speed
170 rpm
Motor
3.6VDC
Max. torque
21.7 in-lbs. (2.4 N-m)
Not for use on precision torque screw requirements.
TRUSTED
350
SINCE
1862
CAT. NO.
DESCRIPTION
PA4336
PA6000
PA6001
Cordless screwdriver & socket set
Replacement battery
Battery charger
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Voice and Category 5 Data Termination Kit
• Includes the tools and connectors necessary for installing a voice
and data network
• Durable Cordura® Plus zipper case protects and organizes tools
and ­includes a see-through pouch for storing connectors
• Outside pockets provide convenient storage of instruction manuals
or worksite documents
CAT. NO.
45469
UPC NO.
45469
DESCRIPTION
Voice and Category 5 Data Termination Kit
45482
45579
46023
46022
45575
45482
45579
46023
46022
45575
45479
45479
Cable Cutter
Kwik Stripper® Twisted Pair Stripper
Punchdown Tool with 110 Blade
66 Style Punchdown Blade
Telephone Ratchet Crimper for 4-, 6- and 8- Position
Modular Plugs
Zipper Case
Kit Includes:
45469
Category 5 Data Termination and Test Kit
• Includes the tools, connectors and testers necessary for installing
a Cat 5 data network
• Durable Cordura® Plus zipper case protects and organizes tools
and includes a see-through pouch for storing connectors
• Outside pockets provide convenient storage of instruction manuals
or ­worksite documents
CAT. NO.
45470
UPC NO.
45470
DESCRIPTION
Category 5 Data Termination and Test Kit
45482
45579
46023
45575
45482
45579
46023
45575
468T
60379
468R
45485
60380
45485
Cable Cutter
Kwik Stripper® Twisted Pair Stripper
Punchdown Tool with 110 Blade
Telephone Ratchet Crimper for 4-, 6- and 8- Position
Modular Plugs
Modular Cable Tester Transmitter with Tone
Generator
Modular Cable Tester Receiver
Zipper Case
Kit Includes:
45470
www.greenlee.com
351
COMMUNICATIONS
HAND
TOOLS
Telecom Splice Crimpers
• Side cutter for AWG 19-26 copper
• Non-slip grips for precision control
• Limited lifetime warranty
• Crimp capacity
– UR: AWG 19-26
– UY: AWG 22-26
– UG: AWG 19-26
PA1180 only
• Stripping cavity for AWG 22 wire
• Needle-nose with knurled surface for gripping, wrapping and looping
PA1180
CAT. NO.
PA1180
PA1178
DESCRIPTION
4-in-1 Telecom Splice Crimper
Telecom Splice Crimper
PA1178
Round Cable Cutters
• Cuts solid or stranded cable up to AWG 6
• Precise and effortless cuts
• Round cutting form won't deform cables
• Ideal for UTP and Coax, RG58, RG59 and RG6/6Q;
RG7 and RG11 with PA1175
• Limited lifetime warranty
PA1175
CAT. NO.
DESCRIPTION
PA1175
PA1179
Contour Round Cable Cutter
Dual-Contour Round Cable Cutter
PA1179
Cable Cutter, 8 AWG
• Designed to cut solid, stranded wire up to 8 AWG (10 mm²)
and multi-­conductor cable up to 1/2" (12.7 mm) in diameter
• Curved cutting blades ensure an easy cut
• Economically priced
• Cushioned-grip handle for comfortable use
• Heat-treated for long life
• Stamped and precision ground from high-carbon tool steel
• Return spring
• Locking latch
• Rust-resistant black oxide finish
CAT. NO.
45482
45482
TRUSTED
352
SINCE
1862
UPC NO.
45482
DESCRIPTION
Cable Cutter
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Cable Splicer’s Knife and Splicer's Snips
• Cuts cable, telephone wire and strips insulation
• Tough, tempered steel knife blade holds its edge longer
• Full-sized knife handle provides greater comfort
• Knife has a short, coping-type blade made of the finest cutlery steel
• Scissors have an upper blade with two stripping notches to strip
most ­insulations from 19-24 AWG.
PT-K01A
CAT. NO.
UPC NO.
DESCRIPTION
PT-K01A
12997
Scissors and Knife Kit in Pouch
DataComm Snips, Electrician's Snips
• Cuts, strips and trims data and phone cables
• Ergonomic design nests in hand for comfort and added cutting power
• One fully serrated blade for clean cuts
• “V” stripping notches for 19 and 23 AWG wire
• Manufactured from high-carbon steel, chrome over nickel plate
CAT. NO.
PT-T03
PT-T03
UPC NO.
89195
DESCRIPTION
Snips
Pro Stainless Steel Wire Strippers / Cutters / Crimpers
• Cutlery grade stainless steel prevents wear and corrosion to provide 5X longer life
• Pliers grab, form and bend wires
• Precision ground strippers engineered for clean, easy insulation removal
• Bolt Threaders clean threads after shearing
• Comfort Grips are double molded, lightweight and easy to grab
• Professional, multi-function tool includes a crimper, looper,
non-obstructive lock mechanism, spring return, and high grade shears
• Note: this is not an insulated tool
• Lifetime warranty 1955-SS
CAT. NO. UPC NO. DESCRIPTION
SOLID STRANDED
STRIP STRIP
BOLT
SHEAR
1950-SS
02241
Pro Stainless Wire Stripper / Cutter / Crimper
10-18
CRIMP
12-20
6-32, 8-32
1955-SS
01361
16-10
Pro Stainless Wire Stripper / Cutter / Crimper (Curve) 10-18
12-20
6-32, 8-33
1956-SS
02242
16-10
Pro Stainless Wire Stripper / Cutter / Crimper (Curve)
8-16
6-32, 8-34
16-10
6-14
www.greenlee.com
353
COMMUNICATIONS
HAND TOOLS
GripP-Strippers 10 & 20
• Head of tool and handles designed at optimum 22º angle to prevent
awkward wrist bends
• Precision grould blades ensure consistent stripping and cutting
• Features screw cutter and wire loops embedded in frames
• Built-in safety lock
• Gripping jaws on front of tool for pulling wire
• PA1117 will work on Romex household cable
• Note: This is not an insulated tool
CAP (AWG)
PA1117
CAT. NO.
DESCRIPTION
SOLID
STRANDED
PA1117
PA1118
PA1123
GripP 10 cutter/stripper
GripP 20 cutter/stripper
Wire Stipper Bundle, includes both PA1117 and
PA1118
10-22
20-30
12-24
22-32
Do not use on live circuits.
stripax® Pro 6
• Strips heavy-duty and industrial insulations including
THHN & THHW
• Strips standard insulations including PVC, rubber and silicone.
• Provides nick-free stripping of insulation with no damage to conductors
• Built-in cutter provides a smooth, straight cut without distorting
the conductor
• Fine adjustment slider on top of tool lets you adjust to the
insulation thickness
• Handles designed for comfort and require low hand force
• Not for Teflon or Kapton hard insulations (use part number PA1115P
mini-stripax Plus with a Teflon blade for these insulations)
• Perfect companion for any of our wire ferrule crimpers
• Strippers carry a lifetime warranty; blade warranty is one year
for defects only
• Lifetime limited warranty
PA2113
68 spring- compression
blades on Pro 6†
Adjustable wire stop to set
strip lengths
CAT. NO.
DESCRIPTION
WEIGHT
PA1113
PA2113
stripax® Pro 6 (28-10 AWG) (.08-6.0 mm2)
stripax® Pro 6 replacement stripping blade set
5.5 oz
Do not use on live circuits
† 68 spring- compression blades precisely adjust to the insulation.
Teflon® is a registered trademark of Dupont
Cutter on bottom means less
hand force required
Round stripping blades on
Pro 16 cut insulation cleanly
TRUSTED
354
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
mini-stripax® plus
• Strips flexible and solid conductors with PVC, Teflon, silicone
and other special insulations
• Strips multiple conductors and thin ribbon-cable
conductors simultaneously
• Adjustable wire stop and built-in wire cutter
• 28-18 AWG (0.80-1.0 mm2) PVC blade included
• See replacement blades in next section
• Limited lifetime warranty
PA1115P
Strips PVC only. Do not use on live circuits.
For Teflon, order blades separately see below in mini-stripax plus Replacement Blades Section.
CAT. NO.
DESCRIPTION
WEIGHT
PA1115P
mini-stripax® plus (28-18 AWG)
4 oz
Teflon® is a registered trademark of Dupont
Adjustable Wire Stripper & Cutter
• Economical wire stripping tool for multiple cables
• Made of high carbon steel and heat treated for long life
• Adjustable settings for wire sizes from 30-10 AWG
Do not use on live circuits.
CAT. NO.
DESCRIPTION
WEIGHT
PA1161
Adjustable wire stripper & cutter (30-10 AWG)
3 oz
PA1161
www.greenlee.com
355
COMMUNICATIONS
HAND TOOLS
Combo UTP/Coax SureStrip®
• Professional all-in-one cutter/stripper for coaxial and twisted pair cables
• Cuts and strips multiple cable types:
– Coax: RG6, RG6 Quad and RG59
– Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5
• Easy-to-use combination cutter/stripper
• Adjustable stripping blade for UTP/STP;
accommodates different insulation thicknesses
without damaging conductors
• Self-regulating cassette blade prevents nicks
• Coax blade cassette is removable to adjust stripping depth of both blades with hex key included
(Note: Hex key stores securely in bottom of tool)
• Contoured finger grips for cutting power
PA1119
CAT. NO.
DESCRIPTION
WEIGHT
PA1119
PA2119
PA2120
Combo UTP/Coax SureStrip®
Coax Blade Cassette
UTP Cut/Strip Blade
2.5 oz
—
—
Data SureStrip®
• Small, compact tool that cuts and strips multiple cable types:
– 4-, 6- and 8- conductor flat satin cables
– 4-, 6- and 8- conductor UTP/STP data cables
– 25- vpair UTP/STP data and telephone cables
• Multi-conductor round bundled cables with a
maximum diameter of .5” (12.7 mm)
• 14-8 AWG (2.5-75mm2) wire
• Nylon reinforced ABS plastic with stainless steel blade
• Fully adjustable with simple thumb screw
• Self-regulating to prevent nicking
• Contoured finger grips for power cutting
PA1116
TRUSTED
356
SINCE
1862
CAT. NO.
DESCRIPTION
WEIGHT
PA1116
Data SureStrip®
2.5 oz
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
CST vario Stripper
• Most flexible coax stripping tool on the market
• Easy to set up and adjust
• Two- and three-level stripping
• Minimum center-to-center strip length is 0.13” (3.2 mm)
• Maximum total strip length is 0.67” (17 mm)
• Adjustable blade positioning in 0.04” (1 mm) increments
• Lifetime warranty on frame only
PA3242
*Not recommended for use on LMR or Teflon cables.
CAT. NO.
DESCRIPTION
PA3240
PA3242
CST vario stripper
Replacement blade holder, blades & allen hex key
Teflon® is a registered trademark of Dupont
PA3240
CST Strippers
• Fixed blade system that accommodates 0.1"-0.315" (2.5-8.0mm) cable
diameters including RG58/59/62AU, RG6, RG6 Quad, RG174,
Belden 1505A, 1855A and 8281
• Cam adjustment ensures precise and repeatable hold on cable
• Memory blocks reduce set-up time and are easy to interchange and mark
for various applications
• Blades are two-sided for longer use
• No cable jacket distortion during stripping process
• Blade cassettes easy to change
• Lifetime warranty on frame only
PA1240
CAT. NO.
DESCRIPTION
COMMON USES
PA1240
PA2240
PA1243
PA2243
PA1247
PA2247
PA1248
PA2248
PA1250
PA2245
CST Green - 3 Level (A=.279, B=.201)
Green Blade Cassette only
CST Brown - 3 Level (A=.295, B=.137)
Brown Blade Cassette only
CST Orange - 3 Level (A=.327, B=.146)
Orange Blade Cassette only
CST Black - 3 Level (A=.344, B=.094)
Black Blade Cassette only
CST Frame only
CST Memory Cartridge only
Common 2- & 3-piece
Kings, Amphenol 3-piece
ADC, Amphenol HDTV
Y-block –
inserts into tool to tighten up
rollers for smaller cable sizes
PA2245
PA2240
PA2247
PA2248
www.greenlee.com
357
COMMUNICATIONS
HAND TOOLS
CST Pro Coax Stripper
• New patent-pending coax stripping system for precision & accuracy
• Works with a wide range of cable diameters from .1" - .315” (2.5-8.0mm)
including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281
and mini-coax
• Pre-set for standard 2- and 3- level strip lengths
• Coax stripper designed for pros requiring precision, versatility & ease of use.
• Reversible-rollers easily adjust for various cable sizes including mini-coax.
• Dual roller mechanism perfectly centers cable & applies equal pressure to
eliminate cable distortion
• Quick-change pre-set blade cassettes
• Cam adjustment ensures precise hold on cable
• Fixed blade cassettes pre-set for standard 2- and 3- level strip lengths
• Interchangeable blades reduce set-up time
• Lifetime warranty on frame only
PA1282
PA2284
Reversible Rollers
PA2282 3 Level
Blade Adjustment Screws
CAT. NO.
DESCRIPTION
COMMON USES
PA1280
PA2280
PA1281
PA2281
PA1282
PA2282
PA1283
CST Pro Green 3-level (A=.279, B=.201)
Green Blade Cassette only
CST Pro Orange 3-level (A=.327, B=.146)
Orange Blade Cassette only
CST Pro Black 3-level (A=.344, B=.094)
Black Blade Cassette only
CST Pro Blue 2-level (A=.250)
Common 2- & 3-piece
PA2283
PA1285
PA2284
Blue Blade Cassette only
CST Pro Frame only
CST Pro Rollers only
Kings, Amphenol RFX 3-piece
ADC, Kings, Amphenol HDTV, Mini's
Standard RG6/6QS & RG59,
CATV "F", Mini's
LC CST Strippers
• Self-regulating tension
• Adjust cutting depth on each blade for varying cable thicknesses with the
included hex key
• Pre-set for common strip lengths
• Blades adjust for strip dimensions other than our standard pre-set units*
PA1255
CAT. NO.
DESCRIPTION
PA1255
PA1256
PA1257
PA1258
PA2263
LC CST-58/59 – 2- & 3-Level, Adjustable
LC CST-11 – 2- & 3--Level, Adjustable
LC CST CATV "F" – 2-Level
LC CST-Mini
Replacement Blade
*To adjust strip lengths simply change blade locations in the lower jaw to attain the following:
.157” (4 mm), .236” (6 mm), .315” (8 mm), .394” (10 mm) and .472” (12 mm)
Not recommended for use on LMR or Teflon cables.
Teflon® is a registered trademark of Dupont
TRUSTED
358
SINCE
1862
SPECIFICATIONS
PRESET STRIP LENGTHS* CABLE USAGE
LC CST-58/59
0.315” outer jacket
0.157” inner dielectric
0.315” outer jacket
0.157” inner dielectric
RG58, RG59, RG62 AU & RG6
LC CST CATV “F”
0.236” outer jacket
LC CST-Mini
0.344” outer jacket
0.094” inner dielectric
RG59, RG6 & RG6 QUAD CATV”F”
(preset for RG6 CATV “F”)
RG178, RG179, RG188, AT&T
735(A), NT735, Belden 1855A,
Belden 8218, RG180, RG187,
RG188A, RG405 and more
LC CST-11
RG8, RG11 & RG213
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Kwik Stripper® Twisted Pair Stripper
• No tool is better for trimming the jacket from twisted pair cable
without damaging the individual conductors
• Blade depth adjustment ensures precise cutting depth
• Blade penetration controlled by tension loop
• Strip length gauge
CAT. NO.
45579
45579
UPC NO.
45579
DESCRIPTION
Kwik Stripper® Twisted Pair Stripper
45579
Typically used for Modular Plug Connectors (See pages 373)
Pro Kwik Stripper® CATV
• Designed for the professional CATV cable installer. Uses reversible
stripping cartridges for RG6, RG59, RG11 and RG7 CATV cables that
are replaceable
• No adjustments needed
• Included with the tool, the RG6/RG59 cartridge strips
cable jacket and ­dielectric to 1/4" (6.4 mm)
• Included with the tool, the RG11/RG7 cartridge strips
cable jacket and ­dielectric to 1/4" (6.4 mm)
• Extra-large finger hole
45591
CAT. NO.
45591
UPC NO.
01174
DESCRIPTION
Pro Kwik Stripper® CATV
www.greenlee.com
359
COMMUNICATIONS
HAND TOOLS
AM 25 Slitter
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables
• Adjustable cutting depth
• Swivel blade for circular, longitudinal and spiral cuts
• Spare blade in handle
• Cable holding clip with integrated edge for removing slit insulation
• Laser-trimmed, stainless-steel blade for long use
• Slits PVC, Teflon and THHN
• Perfect for armored cable
CAT. NO.
DESCRIPTION
PA1820
PA2109
AM 25
Replacement blade
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
Teflon® is a registered trademark of Dupont
PA1820
AM 35 Slitter
• Strips and slits 1.0" to 1.4" (25-35mm) diameter Round Cables
• Adjustable cutting depth for insulation up to 0.18” (4.5 mm) thick
• Swivel blade for circular, longitudinal and spiral cuts
• Spare blade in handle
• Cable holding clip with integrated edge for removing slit insulation
• Laser-trimmed, stainless-steel blade for long use
• Slits PVC, Teflon and THHN
CAT. NO.
DESCRIPTION
PA1821
PA2109
AM 35
Replacement blade
Teflon® is a registered trademark of Dupont
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
PA1821
Universal Slitter
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables
• Precision stripping and slitting of rubber, PVC, nylon and
most insulation materials
• Adjustable depth of cut
• Swivel blade for circular, longitudinal and spiral cuts
• Cable is supported during use
• Cable support arm edge is used to pry off thick insulation
• Laser-trimmed, stainless-steel blade for long use
• A perfect tool for mid-point taps
• Spare blade included
PA1822
CAT. NO.
DESCRIPTION
PA1822
PA2109
Universal splitter
Replacement blade
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
TRUSTED
360
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Pocket Cable Stripper
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm)
• Strips solid conductor, stranded conductor and multiple
conductor cables
• Easy blade depth adjustment
• Blade rotates for circular, longitudinal and spiral cuts.
1903
CAT. NO.
1903
13544
13545
13546
UPC NO.
12679
13544
13545
13546
DESCRIPTION
Cable Stripping Tool
Replacement Blade (2 per package)
Replacement Small Hook
Replacement Large Hook
Cable TV “F” Flaring & Attachment Tool
• Flares RG59, RG6 and RG6 Quad Cable types
• Works with CATV "F" connectors
• Save time on cable TV and satellite installations
• Flare the shield braid back from the dielectric without nicking your finger
• Make connections faster and easier with properly prepped cable
• Attachment tool enables you to hold the connector comfortably to insert
onto cable
PA1927
CAT. NO.
DESCRIPTION
PA1927
Cable TV "F" Flaring & Attachment Tool
Coax 3-Way Tool
• Flares RG6 and RG6 Quad Cable types
• Flares shield braid back from the dielectric without nicking your fingers
• Attachment tool enables you to hold the connector comfortably to insert
connector onto cable
• Extraction tool to assist in coupling connector to port or to assist in
uncoupling from port
• Works with CATV "F" connectors
PA1928
CAT. NO.
DESCRIPTION
PA1928
Coax 3-Way Tool
www.greenlee.com
361
COMMUNICATIONS
HAND TOOLS
RG59/RG6/RG6 Quad Flaring Tool
• Works on RG59 and RG6/6 Quad cable
• Flares shield away from center dielectric
• Saves time on CATV and satellite installation
PA1917
CAT. NO.
DESCRIPTION
PA1917
RG59/6/6QS flaring tool
BNC and CATV “F” Extraction Tools
• Chrome finish
• Comfortable driver-style plastic handle
• 1908 CATV “F” is a combination tool. Use the hex socket to easily
remove and insert the connectors; Use the threaded end to hold the
connector while you insert cable for connectors. Helps to prevent finger
injuries
PA1907
PA1908
CAT. NO.
DESCRIPTION
PA1908
PA1907
PA1916
CATV 8" (203 mm)
BNC 8" (203 mm)
BNC 12" (305 mm)
PA1916
SealTite® ProM Coax Crimper
• Crimps weatherproof linear CATV “F”, BNC, RCA & right- angle
compression-type connectors from all manufacturers
• Works with RG6, RG6 Quad, RG59 & RG62AU coax cables
• Versatile tool - accommodates multiple connectors
• The only tool with a single, reversible head eliminating need for adapters.
• No additional parts, attachments or other tools required to change from
one crimp style to another
• Quickly & easily adjust crimp height
• Once properly set, lock with adjustment lock
• Rated life cycle 30,000 (unloaded)
PA1559
TRUSTED
362
SINCE
1862
CAT. NO.
DESCRIPTION
PA1559
SealTite® ProM Coax Crimper
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
RG59/6Q-7/11 Pro Coax Compression Tool
• Versatile tool crimps RG59, RG6, RG6 Quad , RG 7/11, BNC and RCA
Compression Connectors
• Cable holder rotates to accommodate different connector sizes
• Adjustable Crimp length accommodates most manufacturers' connectors
• Once adjusted, no additional parts or adapters are needed to change from
one crimp style to another
CAT. NO.
DESCRIPTION
PA70020
RG59/6Q-7/11 Pro Coax Compression Tool
PA70020
SealTite® 59/6 CATV “F” Compression Crimper
• Performs compression crimping of waterproof CATV “F” connectors for
RG59 and RG6/RG6 Quad 75 ohm coaxial cables
• Works on Augat/T&B Snap-N-Seal™ connectors, AIM CATV “F” waterproof
connectors and Paladin SealTite™ connectors
• Fully ratcheting one-cycle crimp function
CAT. NO.
DESCRIPTION
PA901024
SealTite® Crimper
PA901024
www.greenlee.com
363
COMMUNICATIONS
HAND TOOLS
SealTite® Cable TV “F” Compression Connectors
• Large hex nut for easy installations
• Patented design with 360º cable gripping sleeve
• Solid brass construction with nickel plating to prevent UV degradation
RG59
PA9642
SealTite RCA Compression Connectors
RG6 &
RG6 Quad RG6 Quad
DESCRIPTION
CAT. NO.
CAT. NO.
CAT. NO.
10 Pack Clamshell
20 Pack Clamshell
50 Pack Jar
100 Pack Bulk
PA9642
PA9610
PA9645
N/A
PA9643
PA9611
PA9646
PA9614
PA9644
PA9612
PA9647
PA9615
*Also available in retail jar pack, PA9687.
®
• Patented design with 360º cable gripping sleeve
• Full gold contacts for low signal loss
• Includes slip-on color bands for easy cable identification
• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors
• Constructed from solid brass with nickel plating
RG59
PA9714
RG6 &
RG6 Quad
DESCRIPTION
CAT. NO.
CAT. NO.
10 Pack Clamshell
50 Pack Jar
PA9720
PA9721
PA9714
PA9716
SealTite® BNC Compression Connectors
• Patented design with 360º cable gripping sleeve
• Full gold contacts for low signal loss
• Includes slip-on color bands for easy cable identification
• A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors
• Constructed from solid brass with nickel plating
RG59
PA9715
RG6 &
RG6 Quad
DESCRIPTION
CAT. NO.
CAT. NO.
10 Pack Clamshell
PA9730
PA9715
50 Pack Jar
PA9731
PA9740
Hex Crimp Cable TV “F” Connectors
• Crimp-on style cable TV “F” connectors
• All-brass with nickel plating for durability
• Designed for indoor use
PA9676
RG59
RG6
DESCRIPTION
CAT. NO.
CAT. NO.
CAT. NO.
10 Pack Clamshell
PA9676
PA9677
PA9678
RG6 Quad
Twist-On Cable TV “F” Connectors
• Connectors twist onto cable for quick installation
• Sharp threads firmly grip cable for good connections
•EZ-SPIN™ hex nut for easy installation
PA9694
TRUSTED
364
SINCE
1862
RG59
RG6
DESCRIPTION
CAT. NO.
CAT. NO.
10 Pack Clamshell
PA9694
PA9695
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Push-On Cable TV “F” Connectors
• No crimp tool required. Simply strip cable and push connector onto it
• Special knurled nut offers superior grip for strong connection
• All brass, nickel-plated for durability and low signal loss
• For indoor usage only
RG6
RG59
PA9682
DESCRIPTION
CAT. NO.
CAT. NO.
10 Pack Clamshell
PA9682
PA9683
Other Coaxial Connectors
Connect CATV “F” cables to RCA plugs.
• Eliminate the need for new cabling
• Solid brass with nickel plate
• 75 ohm rating
PA9719
PA901074
CAT. NO.
DESCRIPTION
PA9719
PA901074
Adapter, CATV “F” (female) to RCA (male) (Qty. 10)
Adapter, CATV “F” (female) to BNC (male) (Qty.1)
Dual Port Ground Block
• Provides a positive ground connection between two coaxial
shields and the ground wire
• Creates a connection for the dissipation of any unwanted
electrical charges
• Solid nickel plated zinc alloy
• High-performance, 360º contact, for up to 3.0 GHz
• Suitable for satellite or cable TV
• UL/CSA approved
PA9675
Cable TV “F” Terminators
CAT. NO.
DESCRIPTION
PA9675
Dual Port Grounding Block
• Solid brass body with nickel plating
• ½ watt resistor (5% tolerance); 75 ohm
PA9686
CAT. NO.
DESCRIPTION
PA9686
CATV "F" Terminators (10)
Female Splice Adapter
• Cable TV “F” female-to-female barrel adapter
• Designed for performance up to 3.0 GHz
• Gold-plated contacts
• 2 pack
PA9675
CAT. NO.
DESCRIPTION
PA9675
Female Splice Adapter
BNC Coaxial Adapter
• Precision manufactured from machined brass and nickel plated
for ­corrosion resistance
45728
CAT. NO.
DESCRIPTION
45728
BNC Straight Jack to Jack (1)
www.greenlee.com
365
COMMUNICATIONS
HAND TOOLS
Cable TV Splitters
• Split analog and digital cable TV signals to 2 to 4 outlets
• HDTV compatible and works with cable modems
• 75 ohm impedence
• 5-1000 MHz bandwith
• “F”-style female ports
PA9688
PA9689
CAT. NO.
DESCRIPTION
PA9688
PA9689
PA9690
2-Way Cable TV Splitter
3-Way Cable TV Splitter
4-Way Cable TV Splitter
PA9690
Satellite TV Splitters
• Split satellite and digital signals to multiple outlets
• Compatible with most digital satellite brands, digital cable TV and HDTV.
• 75 ohm impedence
• 5-2400 MHz bandwith
• “F”-style female ports
PA9669
PA9670
CAT. NO.
DESCRIPTION
PA9669
PA9670
PA9671
2-Way Satellite TV Splitter
3-Way Satellite TV Splitter
4-Way Satellite TV Splitter
PA9671
Satellite Diplexer
• Combines signal from satellite dish and UHF/VHF antenna into single coax
cable output
• 5-860 MHz antenna and 950-2450 satellite power pass
• For RG6 or RG6 Quad
• An additional diplexer can be used to split signals again for connection to
satellite and antenna ports on receivers
• Diplexed signals can be distributed through an amplifier to send signal to
multiple outlets
PA9673
CAT. NO.
DESCRIPTION
PA9673
Satellite Diplexer
In-Line Amplifier
PA9672
TRUSTED
366
SINCE
1862
• Boost signals to multiple outlets or on long cable runs
• Works with satellite dish or terrestrial antenna installations with over
50’ of cable
• Digital TV ready
• 20 dB gain
• DC 12-18V
• 950-2400 MHz maximum bandwidth
CAT. NO.
DESCRIPTION
PA9672
In-Line Amplifier
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
SurePunch Pro Punchdown Tool
• Terminate cable in single punch - including 23 AWG Cat6
• Detachable light with long-life LED specially designed to focus the
light on the panel work area
• Luminous intesity of the LED is 2200 mcd
• Finger grips and non-slip rubber-embedded cushioned handle
for comfort
• Multi-use spudger that can be used as a screwdriver or an IDC
contact insertion tool
• Hook to feed wires through holes
• Pick to separate bonded twisted-pair cables or to strip insulation
and cut wire
• Adjustable HI/LO spring compression for all cable types
LO = 27.5 lbs (122 N), HI = 37.5 lbs (167 N)
• Uses twist-and-lock style blades
• Blade storage area in end of handle with comfortable latch cover
PA3590
CAT. NO.
PA3590
PA3584
PA3587
PA3588
PA3596
PA3598
PA3599
PA3589
PA3585
PA3586
PA3591
PA3592
PA3593
PA3595
PA4599
DESCRIPTION
Tools with lights
SurePunch Pro PDT handle (no blade) and light
SurePunch Pro PDT with Double 110 blade and light
SurePunch Pro PDT with 110 & 66 reversible cut & punch/punch-only
blades and light
SurePunch Pro PDT with 1110/66 combination cut-only
blade and light
SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade
and light
SurePunch Pro PDT with BIX™ cut-only (scissors type)
blade and light
SurePunch Pro PDT with Krone® LSA cut-only (scissors type) blade
and light
Tools without lights
SurePunch Pro PDT handle (no blade)
SurePunch Pro PDT with Double 110 blade
SurePunch Pro PDT with 110 & 66 reversible cut &
punch/punch-only blades
SurePunch Pro PDT with 1110/66 combination cut-only blade
SurePunch Pro PDT with 110 reversible cut & punch/punch-only blade
SurePunch Pro PDT with 66 reversible cut & punch/punch-only blade
SurePunch Pro PDT with Krone® LSA cut-only (scissors type) blade
SurePunch Pro PDT detachable light and batteries
www.greenlee.com
367
COMMUNICATIONS
HAND TOOLS
SurePunch Punchdown Tools
• Cushion grip, molded to the shape of your hand, for comfort and a
sure, non-slip hold
• Increased HI/LO impact force to meet demands of new cable types
and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N)
• For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire
• Uses twist-and-lock style blades
• Cushioned heel for comfort in the palm of your hand
• New latch cover blade storage area in end of handle
• Lanyard holes in end
PA3570
PA4591 PA4573 PA6514 PA4571 PA4574 PA4572
PA4575
CAT. NO.
DESCRIPTION
PA3570
PA3571
PA3572
PA3573
PA3574
PA3575
PA3576
PA3579
SurePunch PDT® handle (no blade)
SurePunch PDT® with 110/66 combination cut-only blade
SurePunch PDT® with 110 reversible cut & punch/punch-only blade
SurePunch PDT® with 66 reversible cut & punch/punch-only blade
SurePunch PDT® with BIX™ cut-only (scissors type) blade
SurePunch PDT® with Krone® : SA (scissors type) blade
SurePunch PDT® with Double - 110 blade
SurePunch PDT® with both 110 and 66 reversible cut &
punch/punch-only blades
SurePunch 110/66 combination cut-only blade
SurePunch 110 reversible blade
SurePunch 66 reversible blade
SurePunch BIX™ cut-only blade
SurePunch Krone® LSA cut-only blade
SurePunch Double - 110 blade
Telephone Unwrap Bit
PA4571
PA4572
PA4573
PA4574
PA4575
PA4591
PA6514
Impact Punchdown Tools
• For 28-24 AWG Solid or Stranded conductor
• Standard impact compression design
• Adjustable HI/LO settings for compression force
• Impact force: HI = 35 lbs. (110 N), LO = 25 lbs. (155 N)
• Reversible clip-in blades (except BIX & Krone)
• Punches down with or without cut function (except BIX & Krone)
• Spare blade stores in handle of tool (except BIX & Krone)
• Impact handle and blades available separately
• Leather holster available to attach to belt
PA3528
PA4527
PA4528
PA4531
TRUSTED
368
SINCE
1862
CAT. NO.
DESCRIPTION
PA3526
PA3527
PA3528
PA4527
PA4528
PA4531
Impact punchdown (tool handle only)
Impact punchdown w/66 blade
Impact punchdown w/110 blade
Replacement 66 blade
Replacement 110 blade
Replacement Krone®-type blade
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Punchdown Tool
• Inserts wire for a corrosion-resistant termination and trims off
excess wire
• Terminates 66, 110, BIX and Krone cross-connect and wall jacks
• Spring-loaded for fast, low-effort wire seating and termination
• Internal impact mechanism eliminates jamming for longer, trouble-free
service life
• Adjustable low - and high-impact force settings
• Bayonet-style blade locking mechanism
• Neoprene pad for shock absorption
• Spare blade storage in the handle
• Color-coded yellow on the cut side of tool
CAT. NO.
46023
46020
46021
46023
46022
46024
46025
UPC NO.
46020
46021
46023
46022
46024
46025
DESCRIPTION
Punchdown Tool Only
Punchdown Tool w/66 Blade
Punchdown Tool w/110 Blade
66 Style Blade
110 Style Blade
BIX Style Blade
ProPunch™ 110 Multi-pair Punchdown
PA3560
Terminates and cuts up to five pairs of data/voice cable at the same time!
We designed it to perform over 30,000 cycle punches and to terminate most
23 AWG cable pairs in one punch! This tool delivers more than one and a
half times the force of other multi-punchdown tools on the market today. The
rugged “no-slip” handle fits comfortably in your hand with the handle end
contoured to the heel of your hand
• Fewer punches saves time
• Smooth operation and rugged, comfortable handle absorbs punch recoil
• Terminates 28-22 AWG (.08 - .34 mm2) solid or stranded wires with
single insulation
• Cut and punch blade cassette or switch blades for punch only
• Designed to work with 23 AWG CAT 6 cable
CAT. NO.
DESCRIPTION
PA3560
PA3561
PA4560
PA4561
PA4562
PA4563
ProPunch 110 with 5-pair head
ProPunch 110 with 4-pair head
Replacement 5-pair head
Replacement 4-pair head
Replacement 5-pair blade cassette
Replacement 4-pair blade cassette
www.greenlee.com
369
COMMUNICATIONS
HAND TOOLS
Non-Impact Punchdown Tools with Fixed Blades
• Non-impact, low-cost punchdown tools for 110, 66 & BIX
• Works with 28-22 AWG (.08 - .5 mm2)
• Solid or stranded, single insulation wire
• Comfortable rubber handle grip
• Performs both cut and punch functions
• Perfect for small jobs and the do-it-yourself installer
• Fits in the palm of your hand
• Typically lower in cost than replacement blades for punchdown tools
PA3580
PA3581
PA3582
CAT. NO.
DESCRIPTION
WEIGHT
PA3580
PA3581
PA3582
110 Punchdown Tool
66 Punchdown Tool
BIX™ Punchdown Tool
3 oz
3 oz
3 oz
Punchdown Stripper
• Self-regulating strip depth
• Fast and easy to use
• Great for CAT-5, CAT-5e, and CAT-6 data cable
• Built-in 110 punchdown (punch only)
PA1913
CAT. NO.
DESCRIPTION
WEIGHT
PA1913
Punchdown stripper
2 oz
Pocket Probe Pick
Probe pick for pulling wire, slicing, stripping cable and cleaning debris off terminal
panels. Small and lightweight—pen-sized with clip for carrying in pocket
• Spudger tip
• Wire hook
• Wire stripper and slitting tooth
• Non-conductive scraping tip
open
PA1915
CAT. NO.
DESCRIPTION
WEIGHT
PA1915
Pocket probe pick
3 oz
closed
Can Wrench
• Strips PVC insulation
•Strips outer jacket of AWG 22/4 and 24/4 telephone cable
• Strips insulation of AWG 22 (.34 mm2) and AWG 24 (.20 mm2) wire
•3/8” (9.5 mm) and 7/16” (11 mm) hex sockets for accessing panels
• Durable shock-resistant design
PA1900
TRUSTED
370
SINCE
1862
CAT. NO.
DESCRIPTION: HEAVY DUTY KEYSTONE TIP-
WEIGHT
PA1900
Can Wrench
5 oz
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Jack Terminator
• High-grade, hardened steel frame offers superior performance
and durability
• Ratcheted action to ensure proper, consistent termination
• Adjustment feature for extra leverage applications
• Quick-change punch sets require no tools
• Removable jack cradle allows for alternate lacing option
• Punch heads can be purchased separately
• Rubber-embedded handles provide extra comfort
• For use with Modular Jacks listed below including CommScope®
(Systimax®, Uniprise®), Leviton®, OCC®, HellermannTyton®,
Hubbell®Premise Wiring and Legrand® (Ortronics®)
• Lifetime Warranty (crimper frame only)
PA8100
SPECIFICATIONS
Specifications
PA8100
General Jack Terminator™ With
Punch Down Head-Set
General Punchdown
Head-Set
General Punch Head Only
Length
Height
Width
Weight
9.6” (245 mm)
3.25” (80 mm)
1.25” (32 mm)
1.25 lbs (575 g)
9.75” (248 mm)
4” (102 mm)
1.25” (32 mm)
1.4 lbs (652 g)
1.6” (40 mm )
4” (102 mm)
1.25” (32 mm)
2 oz (54 g)
1” (26 mm)
2.1” (55 mm)
1.25” (32 mm)
0.8 oz (23 g)
CAT. NO.
DESCRIPTION
JACK COMPABILITY
PA8100
PA8105
PA3711
PA3811
PA8106
PA3712
PA8107
PA3713
PA8108
PA3714
PA8109
PA3715
PA8110
PA3716
PA8111
PA3717
PA8112
PA3718
Jack Terminator™ Crimper Frame
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Replacement Punch Head Only
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Jack Terminator™ with Punchdown Head-Set
Replacement Punchdown Head-Set
Punchdown Head Set not Included
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MPS100E, Uniprise® UNJ600/500
Systimax® - MGS400, MGS500, MGS600
Systimax® - MGS400, MGS500, MGS600
Leviton® - 41106, 41108, 5G108
Leviton® - 41106, 41108, 5G108
Leviton® - 61110, 5G110, 6110G
Leviton® - 61110, 5G110, 6110G
OCC® - KMJA5E, KMJA6, K6A
OCC® - KMJA5E, KMJA6, K6A
HellermannTyton® - RJ45FC5E, RJ45FC6
HellermannTyton® - RJ45FC5E, RJ45FC6
Hubbell® - HXJ Series
Hubbell® - HXJ Series
Ortronics® - TJ5E00, TJ600, TJ610
Ortronics® - TJ5E00, TJ600, TJ610
www.greenlee.com
371
COMMUNICATIONS
HAND TOOLS
All-in-One UTP Snagless Crimper
• Cuts and strips round or flat cable
• All metal construction
• Cushion grips for improved comfort and control
• For standard and "snagless" RJ45 connectors
• Also crimps RJ11/22 and RJ22 WE/SS style plugs
PA1561
CAT. NO.
DESCRIPTION
PA1561
All-in-One UTP Snagless Crimper
All-in-One Ultra Telephone Tools
• 4 crimp functions with a single tool without changing dies
• Crimps 4- position RJ22 handset
• Crimps 4- and 6- position RJ11/RJ12 connectors
• Crimps 8- position RJ45 (non-keyed)
• Embedded cable cutter and stripper
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables
• Advanced ratchet system
• Precision die-cast aluminum head
• Crimps 6- position RJ11-DEC offset type connectors (P/N 901014)
PA901014
CAT. NO.
DESCRIPTION
PA901014
PA901016
PA2530
All-in-One Ultra Telephone Tool AMP (Tyco)
All-in-One Ultra Telephone Tool (WE/SS)
Replacement blade kit
All-in-One Pro Telephone Tools
• Crimps 4- position RJ22 connectors
• Crimps 4- and 6- position RJ11/RJ12 connectors
• Crimps 8- position RJ45 (non-keyed) connectors
• Embedded cable cutter and stripper
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables
• Comfortable rubber-embedded handles
• Built-in safety ratchet release
PA1530R
TRUSTED
372
SINCE
1862
CAT. NO.
DESCRIPTION
PA1540
PA1530R
PA2530
All-in-One Pro Telephone Tool AMP (Tyco)
All-in-One Pro Telephone Tool (WE/SS)
Replacement blade kit
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Telephone Ratchet Crimper
• Combination tool terminates 8- position, 6- position and 4- position
(45575 only) modular style plugs
•  No need to change crimping dies
•  Full-cycle ratchet mechanism provides consistent,
quality terminations every cycle
•  Straight action ensures uniform crimp
•  Small, compact design
•  Built-in wire cutter and stripper for flat cable
•  All-steel frame has rust-resistant, black oxide finish
45553
CAT. NO.
Typically used for Modular Plug Connectors
(See below)
45553
45575
UPC NO.
45553
45575
DESCRIPTION
Telephone Ratchet Crimper
Telephone Ratchet Crimper
45575
Typically used for Modular Plug Connectors
(See below) Our Telephone Ratchet Crimper
was designed with a compact head to fit into
tight spaces and ergonomic ­handles for operator comfort.
Modular Plug Connectors
RJ45
RJ45
• RJ45 8-conductor modular plugs
• 50 micron gold plating
• Meets or exceeds EIA/TIA
specifications
RJ11
• RJ11 6-conductor modular plugs
• For use with stranded wire
• 50 micron gold plating
WE/SS-STYLE 8P8C CONNECTORS
CONNECTOR TYPE
CABLE TYPE
QUANTITY
RJ45
Cat5e, Solid or Stranded
Round, Flat or Oval
10/Pack
50/Pack
100/Pack
CAT. NO.
PA9546
PA9655
PA9549
RJ11
WE/SS-STYLE 6P6C CONNECTORS
DESCRIPTION
CONNECTOR TYPE
CABLE TYPE
RJ11
Solid or Stranded
Round, Flat or Oval
QUANTITY
10/Pack
CAT. NO.
PA9520
www.greenlee.com
373
COMMUNICATIONS
HAND TOOLS
EK50ML Micro Crimping Tool
• Ergonomic; total weight less than 2.2 lbs
• Crimp 3x faster with 90% less force
• LED work light
• 65% faster crimping cycle vs ratcheting tool.
• 250 crimps per cycle charge when crimping 10AWG wire.
• Patented Jaw Actuation for crimping cycle
• Innovative trigger with PowerSense™ Technology
• Overmolded grip for maximum comfort
• 10.8V Li-Ion battery with charge indicator
SPECIFICATIONS
Weight
2.2 lbs (1 kg)
CAT. NO.
EK50ML138B
Note: EK50ML138 is compatible with all Greenlee Kwik Cycle® and
CrimpALL® dies for various types of cables and sizes.
UPC NO.
EK50ML12011
03105
EK50ML13811
03108
EK50ML12022
03123
EK50ML13822
03124
EK50ML120B
EK50ML138B
MBP108
MBC110
MBC230
EK50MLCASE
03128
03130
03127
03125
03126
03131
COMPATIBLE DIE SETS
Wezag®
EK50ML120
EK50ML138
See page 375-377 for the complete line of dies.
DESCRIPTION
Crimping tool kit with 12mm jaw and 110V charger with
carrying case
Crimping tool kit with 13.8mm jaw and 110V charger with
carrying case
Crimping tool kit with 12mm jaw and 230V charger with
carrying case
Crimping tool kit with 13.8mm jaw and 230V charger with
carrying case
12mm jaw EK50ML bare tool
13.8mm jaw EK50ML bare tool
10.8V EK50ML Li-Ion Battery
10.8V EK50ML Li-Ion Battery Charger, 110V
10.8V EK50ML Li-Ion Battery Charger, 230V
EK50ML Carrying Case
CS30, CS150
Panduit®
CT-2600,CT-300
Thomas & Betts®
Ideal®
Sta-Kon®
Crimpmaster™
CrimpALL® 8000 Series Crimpers
• Ultra-smooth, fully ratcheting crimp cycle with built-in safety release
• Interchangeable die sets of heat-treated steel for long life
• Soft, rubber-embedded handles
• Long-lasting tool that delivers over 50,000 crimp cycles.
• Rugged, double-plated jaw design to increase life span.
• Lifetime warranty on tool; one-year on die sets
• Angled head to prevent awkward wrist bending during operation
• Reduced handle grip distance makes it easy for both small and large hands
• Higher crimp force produced with less hand force so hand doesn’t
tire as quickly
• No breakover hand force – the effort required by most crimpers to make the
last click at the end of the cycle to complete the crimp – the CrimpALL
does the work
• Manufactured using the newest fine blanking technologies.
•EZI-Change™ die screws make changing dies quick and easy – no
screwdriver required
PA8000
TRUSTED
374
SINCE
1862
CAT. NO.
DESCRIPTION
PA8000
PA2303
CrimpALL® tool frame
Replacement EZI-Change™ die screws (2)
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
1300 Series Crimpers
• Fully-ratcheting cycle with built-in safety release
• Interchangeable die sets of heat-treated steel for long life
• Easy to use and maintain
• Available as complete tool with die set inserted or separate tool frame and
individual die sets
• Foam-lined case available to hold frame and 6 die sets together.
• Lifetime warranty on tool; one-year on die sets
•EZI-Change™ die screws make changing dies quick and easy –
no screwdriver required
• Most precise and tightest tolerances on die sets in the industry
• Six ratchet gear settings for optimum crimp performance
PA1302
CAT. NO.
DESCRIPTION
PA1302
PA2303
PA2346
Crimp tool frame
Replacement EZI-Change™ die screws (2)
Replacement Spring
CrimpALL® Interchangeable Die Sets for Modular Plugs
DESCRIPTION
CAT. NO.
CAT. NO.
CABLE TYPE
CONNECTION
CRIMP SIZES
TOOL WITH DIE DIE ONLY
REMARKS
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed WE and SS
PA8030
PA1307
PA2061
Western Electric (WE)/Stewart
Connector (SS)
RJ11 & RJ12 - 6P6C,
6P4C, 6P2C
Flat/Round, Solid/Stranded
RJ11 & RJ12 Unkeyed WE
and SS
PA8031
PA1340
PA2062
Western Electric (WE)/Stewart
Connector (SS)
RJ22 Handset - 4P4C
(4 Pin)
Flat/Round, Solid/Stranded
4 Pin Handset WE and SS
PA8032
PA2063
Western Electric (WE)/Stewart
Connector (SS)
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed AMP
PA8033
PA1342
PA2064
AMP (Tyco) Inc. Connectors Only
RJ50 - 10P10C (10 Pin)
Flat/Round, Solid/Stranded
RJ50 Unkeyed WE and SS
PA8036
PA1345
PA2068
Virginia Plastics (VP)
British Telecom 6 Pole
Plug
Flat/Round, Solid/Stranded
BT 6 Pole
PA2032
British Telecom Plugs Only
RJ45, AMP/Molex
Connectors for dia.
Cable
6.0mm Dia. Round,
Shielded (STP)
RJ45 STP AMP & Molex,
6.0mm dia. cable
PA2674
AMP (Tyco) Inc. & Molex
CrimpALL® Interchangeable Die Sets for Specialty Crimpers
DESCRIPTION
CAT. NO.
CAT. NO.
CABLE TYPE
CONNECTION
CRIMP SIZES
TOOL WITH DIE DIE ONLY
REMARKS
RJ45 WE/SS &
RG6/RG6 Quad CATV
"F"
UTP 4-Pair & RG6/
RG6 Quad
RJ45 WE/SS 8-pin &
0.360" (9.1mm) HEX/0.324"
(8.2mm) HEX
PA8045
PA1387
For standard RJ45 WE/SS Modular
Plugs & 1-piece RG6/RG6 Quad
CATV "F" conns.
PA2687
www.greenlee.com
375
COMMUNICATIONS
HAND TOOLS
CrimpALL® Interchangeable Die Sets for Coaxial Connectors
DESCRIPTION
CAT. NO.
CABLE TYPE
CONNECTION
CRIMP SIZES
TOOL WITH DIE DIE ONLY
REMARKS
RG58, RG59,
RG62AU
BNC/TNC and 3 Piece
0.256" (6.5mm, 0.213" (5.4mm),
0.068" (1.7mm) HEX
PA8001
PA1317
PA2034
Common 2-piece and 3-piece
BNC/TNC
RG174, RG59/62,
mini-coaxial 75-ohm
HDTV SMA, True 75-ohm
BNC/TNC, Mini-UHF
0.255" (6.5mm), 0.197"
(5.0mm), 0.178" (4.5mm),
0.068" (1.7mm) HEX & 0.042"
(1.0mm) SQ
PA8002
PA1366
PA2648
Common 2-piece and 3-piece BNC/
TNC (Kings, ADC, Amphenol, etc.)
RG59, RG6, Belden
8281, Belden 1694A
HDTV BNC/TNC/CATV "f"
True 75-ohm
0.324" (8.2mm), 0.255"
(6.5mm), 0.068" (1.7mm) HEX
& 0.052" (1.3mm), 0.042"
(1.0mm) SQ
PA8003
PA1367
PA2649
Common 2-piece and 3-piece BNC/
TNC (Kings, ADC, Amphenol, etc.)
RG6, Belden 1694,
Bleden 1694A
HDTV BNC/TNC True
75-ohm
0.278" (7.0mm), 0.275"
(6.9mm), 0.068" (1.7mm) HEX &
0.042" (1.0mm) SQ
PA8004
PA1368
PA2657
Common 3-piece BNC/TNC (Kings &
ADC HDTV)
RG58, Mini-59, RG174, small coaxial
SMA, SMB, Mini-59 BNC/
TNC, Mini-UHF
0.128" (3.2mm), 0.213"
(5.4mm), 0.197" (5.0mm), 0.178"
(4.5mm), 0.068" (1.7mm) HEX &
0.042"(1.0mm) SQ
PA8005
PA1363
PA2653
Common 2-piece and 3-piece SMA/
SMB/BNC/TNC & Mini-UHF
RG58, RG174, AT&T
735, 50 and 75-ohm
Thinnet, BNC/TNC,
Mini-UHF
0.213" (5.4mm), 0.178" (4.5mm)
0.068" (1.7mm) HEX & 0.042"
(1.0mm) SQ
PA8006
PA1335
PA2046
50/75 ohm small 2-piece & 3-piece
BNC/TNC (Kings, ADC, etc.)
RG59, RG62,
Belden 8281,
50 and 75-ohm
BNC/TNC and Mini-UHF
0.315" (8.0mm), 0.252"
(6.4mm), 0.068" (1.7mm), HEX
0.042" (1.0mm) SQ
PA8007
PA1336
PA2047
75 ohm 2-piece & 3-piece BNC/TNC
(Kings, ADC, Amphenol, etc.)
RG174, RG179 and
Small Cable
Connection
BNC/TNC
0.178" (4.5mm), 0.128" (3.2mm),
0.068" (1.7mm) HEX
PA8008
PA1338
PA2051
Common 2-piece and 3-piece BNC/
TNC/SMA/SMB
RG6 and RG6 Quad,
Belden 1694A
BNC and CATV "F" Type
& HDTV
0.360" (9.1mm), 0.324"
(8.2mm), 0.068" (1.7mm) HEX
PA8012
PA1356
PA2045
Common 2-piece and 3-piece BNC/
TNC and CATV "F" 2-piece
RG59, RG6 Video
Cable
CATV "F" Type
0.346" (8.8mm)m 0.319"
(8.2mm), 0.256" (6.5mm) HEX
PA8013
PA1328
PA2042
Crimps Ferrules or Sleeves Only
RG8, RG11, RG213
N-Type
0.429" (10.9mm), 0.100"
(2.54mm), 0.080" (2.03mm) HEX
PA8014
PA1365
PA2656
Common 2-piece and 3-piece "N"Type (Kings, ADC, Amphenol, etc.)
RG8, RG11, RG213,
RG216
N-Type, MS39012 Type
0.415" (10.5mm), 0.095"
(2.4mm) HEX
PA8015
PA1319
PA2039
Crimps Pins and Ferrules
Belden 1855A,
1865A, 1505A,
1505F, 1694A,
1694F, 179DT
HDYV BNC/TNC True
75-ohm
0.178" (4.5mm), 0.255"
(6.5mm), 0.278" (7.0mm),
0.068" (1.7mm), 0.041"
(1.0) HEX
PA8049
PA1389
PA2699
Kings, ADC, B&L, Trompeter,
Amphenol, Switchcraft
Teflon® is a registered trademark of Dupont
TRUSTED
376
CAT. NO.
SINCE
1862
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
CrimpALL® Interchangeable Die Sets for Insulated Terminal Crimpers
DESCRIPTION
CAT. NO.
CRIMP SIZES
CAT. NO.
CABLE TYPE
Insulated Terminals
and Lugs
CONNECTION
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2)
12-10 (Yellow), 16-14 (Blue),
22-18 (Red), (6-4 / 2.5 - 1.5 /
.34 - .75 mm2)
TOOL WITH DIE DIE ONLY
PA8021
PA2035
PA1305
REMARKS
For Large Professional Terminals
(Panduit, T & B, etc.)
Insulated Terminals
and Lugs
Solid or Stranded Wire,
22-12 AWG (.34 - 4
mm2)
12-10 (Yellow), 16-14 (Blue),
22-18 (Red), (4/1.5 - 2.5 / .34
- .75 mm2)
PA8022
PA1308
PA2040
For Standard Commercial Terminals
(Hardware Store Brands)
Insulated Terminals
and Lugs
Solid or Stranded Wire,
26-14 AWG (.10 - 2.5
mm2)
16-14 (Blue), 22-18 (Red),
22-26 (Yellow) (1.5 - 2.5 / .34 .75 / .34 - .10 mm2)
PA8023
PA1334
PA2029
For Smaller Wire Barrel Terminals
CrimpALL® Interchangeable Die Sets for Non-Insulated Terminal Crimpers
DESCRIPTION
CAT. NO.
CAT. NO.
CABLE TYPE
CONNECTION
CRIMP SIZES
TOOL WITH DIE DIE ONLY
REMARKS
Non-Insulated
Terminals and
Lugs
Solid or Stranded Wire,
22-8 AWG (.34 - .10
mm2)
10-8 / 14-12 / 18-16 / 22-20
(6 - 10 / 2.5 - 4 / .75 - 1.5 /
.34 - .50 mm2)
PA8024
PA1322
For Standard Commercial Terminals
PA2031
CrimpALL® Interchangeable Die Sets for Open Barrel, Box and Terminal Systems
DESCRIPTION
CABLE TYPE
Open Barrel NonInsulated Terminals,
Narrow Lugs and
Power Contacts
Open Barrel NonInsulated Terminals,
Wide Lugs and Power
Contacts
Open Barrel D-Sub
Contact Pins RS-232
CONNECTION
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2), F Type*
CAT. NO.
CRIMP SIZES
22-18 / 16-14 / 12-10
(.34 - .75 / 1.5 - 2.5 /
4-6 mm2)
CAT. NO.
TOOL WITH DIE DIE ONLY
PA8026
PA2033
PA1306
REMARKS
For Standard Commercial Terminals
Solid or Stranded Wire,
22-14 AWG (.34 - 2.5
mm2), F Type*
16-14 / 22-18
(1.5 - 2.5 / .34 - .75 mm2)
PA8027
PA2096
For Standard Commercial Terminals
Solid or Stranded Wire,
28-20 AWG (.08 - .50
mm2), F Type*
28-24 / 22-20
(.08 - .2 / .34 - .5 mm2)
PA8029
PA1359
PA2097
For Standard D-sub Pins Only; not for
HD D-subs
CrimpALL® Interchangeable Die Sets for Wire Ferrules
DESCRIPTION
CAT. NO.
CAT. NO.
CABLE TYPE
CONNECTION
CRIMP SIZES
TOOL WITH DIE DIE ONLY
REMARKS
Insulated & NonInsulated Wire
Ferruls
Solid or Stranded Wire,
22-10 AWG (.34 - 6
mm2)
22-20 / 18-16 / 14-12 / 10
(.34 - .55 / .75 - 1.5 / 2.5 4 / 6 mm2)
PA8025
PA1360
For DIN or US Type
Wire Ferrules
PA2095
www.greenlee.com
377
COMMUNICATIONS
HAND TOOLS
D-sub Indent Crimpers
• Adjustable Pin Height Locator
• Cushion Grips for comfort
CAT. NO.
DESCRIPTION
PA1460
PA1461
PA1462
D-sub 4 Indent Crimper 26-20 AWG
D-sub 4 Indent Crimper 20-12 AWG
D-sub 8 Indent Crimper 26-20 AWG
PA1460
Electrical Terminal Crimper
• D-sub Pins & Sockets 26-28 AWG
• Butt-Insulated Connectors 22-26 AWG
• Telephone Piercing Spade Lugs 22-26 AWG
• Open Barrel Connectors 14-18, 20-22 AWG
CAT. NO.
DESCRIPTION
PA1176
Multi-Purpose Electrical Terminal Crimper
PA1176
EDAC/ELCO Crimper
Crimp tool for broadcast professionals terminating loose 28-18 AWG
(.08-75 mm2) EDAC and ELCO rack and panel open barrel contacts
•Crimps EDAC pins 516-290-590 & 516-290-591 along with ELCO pins
000-60-8017-03-13
•Embedded pin locators properly align pins to ensure accurate,
reliable crimping
•Fully-ratcheted to prevent under crimping
•Requires low hand force and provides superior crimp force
•True ergonomic design for extreme comfort and performance
•Non-slip, soft rubber handles
•Double-plated for extended long-life and crimping accuracy
•Factory-calibrated and set for precision
PA1670
SPECIFICATIONS
Weight
Pin locators
TRUSTED
378
SINCE
1862
19 oz. (538 g)
CAT. NO.
DESCRIPTION
PA1670
EDAC/ELCO Crimper
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Open Barrel Contact Pin Crimper
Professional crimping tool for open-barrel box and round connector contacts
with a wire range of 30-18AWG (0.05-.75 mm2)
•Precision fixed dual-plate dies for crimp accuracy
•Crimps non-insulated terminal lugs, cable lugs and parallel and serial
splices or “F-Type”
•Works with Molex, Waldom & Leoco-type connectors
•Durable steel construction for long life
•Rubber-embedded ergonomic handles for low-effort operation
PA1645
SPECIFICATIONS
Weight
Range
14 oz. (400 g)
Small: 30-24 AWG (0.05-.20 mm2)
Medium: 22-18 AWG (.34-.75 mm2)
CAT. NO.
DESCRIPTION
PA1645
Open Barrel Contact Pin Crimper
Open Barrel Contact Pin Crimper
Professional crimping tool for open-barrel box and round connector
contacts with a wire range of 24-14 AWG (0.2-2.5 mm2)
•Precision fixed dual-plate dies for crimp accuracy
•Built-in locator
•Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices or “F-Type”
•Works with Molex, Waldom & Leoco-type connectors
•Durable steel construction for long life
•Rubber-embedded ergonomic handles for low-effort operation
SPECIFICATIONS
PA1631
Weight
Range
14 oz. (400 g)
Small: 24-22 AWG (0.05-.20 mm2)
Medium: 18-14 AWG (.34-.75 mm2)
CAT. NO.
DESCRIPTION
PA1631
Open Barrel Contact Pin Crimper
www.greenlee.com
379
COMMUNICATIONS
HAND TOOLS
Kwik Cycle® 9" Crimp Frame
• Used to manually crimp a wide variety of connectors
and terminals to factory specifications
• Frame features a precision full-cycle ratchet for accurate,
repeatable crimps every cycle
• Crimp release lever improves throughput by eliminating rejected
­terminations due to improper connector positioning
• Frame features a tension adjustment preset at the factory
for optimum performance
• High-leverage force and ergonomically-designed handle provides
­comfortable use
• Frame and dies are manufactured from heat-treated, hardened tool steel
for superior function and long life
• All die sets are easily interchangeable with a simple screwdriver.
45504
See our comprehensive line of connectors on pages 364 and 373.
CAT. NO.
45504
UPC NO.
45504
DESCRIPTION
Kwik Cycle 9" Crimp Frame
Kwik Cycle® 9" Interchangeable Die Sets for Insulated & Non-Insulated Terminals
DESCRIPTION
CONNECTION
UPC NO.
CAT. NO.
UPC NO.
FEATURES
TOOL WITH DIE
DIE ONLY
22-10 AWG
Color Coded nests for easy identification
Standard insulated terminals, ring tongue,
spade lug, slide on and but splices
45500
45500
45509
45509
22-10 AWG
Color Coded nests for easy identification
for fully insulated slide-on style connectors
AMP UltrafastTM style
45501
45501
45570
45570
26-16 AWG
For mini insulated terminals with smaller wire
barrels. RIng tongue, spade, slide on and butt
splices
45565
45565
45507
45507
For non-insulated terminals and splices
22-8 AWG
TRUSTED
380
CAT. NO.
SINCE
1862
45505
45505
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
= BARE TOOL
Heat Gun
• Electronic variable heat control ranging from 250-1100º F (120-590º C)
• Two speeds: high & low
• Double insulation safeguards injury from possible electrical failure
inside gun
• Comfortable, lightweight design reduces operator fatigue
• Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm)
focusing nozzle
• UL listed
PA1873
SPECIFICATIONS
Power reqs.
Current draw
Power cons.
120VAC 60 Hz
7.5 amps max.
1200 watts max.
CAT. NO.
DESCRIPTION
PA1873
Heat gun
Desoldering Tools
• Removes solder with simple push-button operation
• Standard (regular & anti-static) replacement tips available
• Repair kits come complete with replacement spring and suction rods
• Durable metal frame
PA1700
CAT. NO.
DESCRIPTION: DESOLDERING TOOLS
PA1700
PA2712
Desoldering tool (standard)
Standard replacement tip
Cable Tie Gun
• For use with plastic cable ties up to 0.25” (6.35 mm) in width
• Neatly fastens and cuts in one action
• Adjustable tension for changing cable bundle pressure
• Automatic cable tie cut off
PA1828-1
CAT. NO.
DESCRIPTION
PA1828-1
Cable tie gun
Note: Leaves 1 mm tab of lock after cut is made.
Kwik Cycle® Cable Tie Guns
• Tension adjustment allows the user to adapt the tool to the size of the tie
• Automatic cut-off eliminates sharp edges on ties
CAT. NO.
45306
45306
45300
UPC NO.
45306
45300
DESCRIPTION
Standard Cable Tie Gun
Heavy-Duty Cable Tie Gun
www.greenlee.com
381
COMMUNICATIONS
HAND TOOLS
HDMI TOOLS
A PRODUCT VIDEO IS
AVAILABLE, SCAN THIS QR
CODE OR VISIT:
www.youtube.com/GreenleeDEMO
HDMI®* HDFT™ Cable Prep Tool
• Use with Greenlee® 24 AWG HDFT™ cable & connectors
• Cuts 24 AWG HDFT™ cables, strips outer jacket and twisted pair shielding
• Curved blade for cutting HDMI®* and HDFT™ cables
• Precision stripping cavity for removing outer jacket on 24 AWG HDFT™ cables
• Exclusive cavity for removing twisted pair shielding on 24 AWG HDFT™ cables
PA1192
CAT NO.
UPC NO.
DESCRIPTION
PA1192
00072
Cable Prep Tool
24 AWG HDMI®* Field Terminating Cable
• Use with Greenlee® HDFT™ Connectors
• Make premium HDMI®* High Speed with Ethernet cables
• Supports HDMI®* 1.4 features: 3D, Ethernet and Audio Return
• 100’ 24 AWG HDFT™ cable
• Solid-core long grain copper
• Fifth twisted pair for Ethernet and audio return
• Other HDMI®* 1.4** features supported: 10.2 Gbps Data Rate, 3D Video
Formats, Deep Color and 4k x 2k Resolution
FTHD24-100
CAT NO.
FTHD24-100
UPC NO.
00079
DESCRIPTION
100' 24 AWG Field Terminating Cable
HDMI®* Field Terminating Connectors
• Make custom length, premium HDMI®* cables
• Eliminates cable clutter
• Costs less than pre-terminated cables
• 10 or 50 pack – 24 AWG HDFT™ Connector Components
• Use With Greenlee® 24 AWG HDMI®* Field Terminating Cable only
• Includes main connector terminal block and wire guides
• Guides are mated and colorcoded for 24 AWG HDMI®* Field Terminating cable
• Make custom length, premium HDMI®* High Speed with Ethernet cables
HDCN24-10
CAT NO.
HDCN24-10
HDCN24-50
*HDMI Equivalent
HDMI®* Registered trademark of HDMI Licensing, LLC
HDFT™ Trademark owned by the Quest Group
TRUSTED
382
SINCE
1862
UPC NO.
00073
00074
DESCRIPTION
Field Terminating Connectors (10 Pack)
Field Terminating Connectors (50 Pack)
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
B
HDMI TOOLS
= BARE TOOL
HDFT™ Pro Deluxe Kit
• Make custom length, premium HDMI®* cables
• Eliminates cable clutter
• Costs less than pre-terminated cables
14 Piece Kit Includes:
1) PA1192 HDMI®* HDFT™ Cable Prep Tool
(1) PA8700 HDMI®* HDFT™ Termination Tool
(10) HDCN24-10 HDMI®* Field Terminating Connectors
(1) PA1175 Media Cable Cutter
(1) TC-30 Deluxe Carrying Case
PA4017
CAT NO.
UPC NO.
PA4017
00099
DESCRIPTION
Pro Deluxe Kit
HDFT™ Pro Kit
12 Piece Kit Includes:
(1) PA1192 HDMI®* HDFT™ Cable Prep Tool
(1) PA8700 HDMI®* HDFT™ Termination Tool
(10) HDCN24-10 HDMI®* Field Terminating Connectors
CAT NO.
UPC NO.
PA4019
00101
DESCRIPTION
Pro Kit
PA4019
Pro HDMI® Cable Tester
PA1599
• 14 LED readout for easy checking
• Sweep function checks for crossed wires
• 9V battery included
CAT NO.
UPC NO.
DESCRIPTION
PA1599
00075
Pro Cable Tester
HDFT™ Die Set
PA4003
• Precision cast 4140 steel for durability
• High tensile steel cutting blades for long life
• Error-proof design avoids misalignment
CAT NO.
UPC NO.
PA4003
00098
DESCRIPTION
Die Set
*HDMI Equivalent
HDMI®* Registered trademark of HDMI Licensing, LLC
HDFT™ Trademark owned by the Quest Group
www.greenlee.com
383
COMMUNICATIONS
NOTES
TRUSTED
384
SINCE
1862
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement