EN
FJ3373 Manual
FanJu FJ3373 NO RCC Weather Station
Features
:
Perpetual Calendar Up to Year 2099
Day of week in 7 languages user selectable: English, German, Italian, French, Spanish, Netherlands and Danish
Time in optional 12/24 hour format
Daily Alarm Function
Automatic snooze function (OFF or 5~60min)
The moon phase display
Barometric pressure:
— Barometric pressure measurement ranges: 600hPa/mb (17.72inHg) to 1100hPa/mb (32.50inHg)
— Pressure alternatively in hPa/mb or inHg
Humidity: Indoor & Outdoor measurable range: 20%RH ~ 95%RH
Temperature:
— Indoor temperature measurement ranges: -9.9°C (15°F) to 50°C (122°F)
— Outdoor temperature measurement ranges: -20°C (-4°F) to 60°C (140°F)
— Temperature alternatively in °C or °F.
— Outdoor thermometer and frost alert
Minimum/maximum display for air humidity and temperature
Wireless Outdoor Sensor:
— Wall Mount or Table Stand
— One Wireless Thermo Sensor Included
— 433.92MHz RF transmitting frequency
— 60 meters transmission range in an open area
The weather forecasting function
Power Supply:
Weather Station:
Battery: 2 x LR6 AA
Power adapter input: DC5V
Wireless Outdoor Sensor:
Battery:2 x LR6 AA
FJ3373 Manual
Weather Station Appearance
FJ3373 Manual
Part A-Positive LCD
A1: Weather Forecasting,
A2: Barometric pressure
A3: Outdoor Temperature
A4: Indoor Temperature
A5: Outdoor Humidity
A6: Indoor Humidity
A7: Time/Calendar or Alarm time
A8: Time Moon Phase
Part B – Back button and power
B1: “SNOOZE/LIGHT” touch field
B2: Keypad
B3: Battery compartment
B4: Support frame
B5: Power supply socket
Part C –Wireless Outdoor Sensor:
C1: LCD display – Temperature
C2: LCD display – Humidity
C3: Transmit signal LED
C4: “°C/°F” button
C5: “TX” button
C6: Battery compartment
FJ3373 Manual
Initial Operation:
Open Weather Station battery compartment cover
Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, and detect indoor temperature & humidity.
The Weather Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3 minutes and is displayed by a flashing reception RF antenna symbol in the “OUTDOOR” display area on the receiver.
This now, replace Wireless Outdoor Sensor battery compartment cover ,Open Weather Station battery compartment cover ,Insert 2 x AA batteries observing polarity [ “+” and “–“ marks]
Manual Time Setting:
Press once “ ” button, can switch the display calendar or second.
Press and hold down the “ ” button for 2 seconds, the unit of temperature display starts to flash.
Now use the “
▲
” and “▼” button to set the temperature of the unit, the unit of temperature can be set to “°C” or “°F”
Press “ ” to confirm your setting, the unit of pressure display starts to flash.
Now use the “
▲ ” and “▼” button to set the pressure of the unit, the unit of t pressure can be set to “hPa” or “inHg”
Press “ ” to confirm your setting, the 12/24 hour mode display starts to flash. Now use “
▲ ” and “▼” buttons to set the correct 12/24 hour mode.
Press “ ” to confirm your setting, the Hour display starts to flash. Now use “
▲ ” and “▼” buttons to set the correct hour.
Press “ ” to confirm your setting, the Minute displays starts to flash. Now use“
▲ ” and “▼” buttons to set the correct minute.
Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “
▲ ” and “▼” buttons to set the date display on Month/Date or Date/Month.
Press “ ” button to confirm your setting, the Year display 2014 starts to flash. Now use “
▲ ” and “▼” buttons to set the correct year.
Press “ ” button to confirm your setting, the Month display starts to flash. Now use “
▲ ” and “▼” buttons to set the correct month.
Press “ ” button to confirm your setting, the Date display starts to flash. Now use “
▲ ” and “▼” buttons to set the correct date.
Press “ ” button to confirm your setting, the language selection for the Weekday displays starts to flash. Now use
FJ3373 Manual
“
▲ ” and “▼” buttons to select a language.
Language Sunday Monday Tuesday Wednesday Thursday Friday Saturday
German, GE SO MO DI MI DO FR SA
English, EN
French, FR
Italian, IT
Spanish, SP
Dutch, DU
SU
DI
DO
DO
ZO
MO
LU
LU
LU
MA
TU
MA
MA
MA
DI
WE
ME
ME
MI
WO
TH
JE
GI
JU
DO
FR
VE
VE
VI
VR
SA
SA
SA
SA
ZA
Danish, DA SO MA TI ON TO FR
Press“ ” to confirm your setting and to end the setting procedures, enter the clock mode
LO
F.Y.I.:
After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time Mode.
There are 7 languages of Weekday: English, German, Italian, French, Spanish, Dutch and Danish.
Setting the Daily Alarms:
Press once “ ” button, the display conversion to alarm activation mode, In this mode, press the “ ” button again to activate the alarm function, which is displayed as "ON", while the alarm icon " " is displayed
。
Also, in this mode the alarm has been activated, and then press “ ” button, you can turn off the alarm function, the display show "OFF" and the alarm icon " " does not show
Press and hold down “
”
button for 2 seconds until Alarm Time hour display of the Alarm time starts to flash. Use the
“
▲ ” and “▼” buttons to set the required hour.
Press “ ” button to confirm your setting, The Minute display of the Alarm time starts to flash. Use the “
▲
” and
“▼” buttons to set the required minute.
Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “
▲
” and “
▼
” buttons to set the minute of snooze you need, it also can be turn OFF.
Press “ ” button to confirm your setting and to end the setting procedure
F.Y.I.:
After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be
FJ3373 Manual repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.
the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is minutes.
Switching OFF the Alarm Signal
The alarm sound when the trigger, press any button except the “ seconds to stop the alarm signal.
” button or press hold the “ ” button for 2
Snooze Function:
Touch the “ ” field or press the “ signal sounds again after already been set.
” button the alarm signal sounds to get to SNOOZE mode. The alarm
In snooze mode, press any button except the “ ” button or press hold the “ ” button for 2 seconds to exit the snooze mode.
F.Y.I.:
When the snooze function is set to OFF, the alarm sound when the trigger, press “ function.
Lunar Phases:
The weather station has a display which automatically displays the current lunar phase
” does not have this snooze
New Waxing Waxing full Full Waning full Waning
Half-moon Half-moon moon half-moon moon moon moon half-moon
Comfort Display
Indoor comfort level is calculated according to the indoor temperature and humidity, a total of 5 levels.
Comfortable too cold or too hot
FJ3373 Manual
Display Temperature/Humidity/ Barometric Pressure and Temperature/Humidity Trend
The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are shown in the LCD display.
After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the temperature/humidity trend (outdoor)
You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
RF Transmission Procedure:
The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature
& humidity after batteries inserted.
The outdoor sensor will automatically transmit temperature and humidity signal to the Weather Station after batteries inserted.
If Weather Station failed to receive transmission from outdoor sensor (“
- -
”display on the LCD), press and hold “
▼” button for 3 seconds to receive transmission manually. RF icon “ ” flashes on the LCD
， the outdoor sensor.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “
MEMERY
” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
To reset the maximum and minimum temperature and humidity, press and hold down the “
MEMERY
” button about 2 seconds. This will reset all minimum and maximum data recorded to the current displayed values.
F.Y.I.:
If the temperature reading is below ranges , the LL.L will be displayed. If the temperature reading is above ranges , the
HH.H
will be displayed.
FJ3373 Manual
Outdoor Temperature Alert Setting
Press “ ” button once
to set Alert ON or OFF. “ ” icon displayed means ON and disappear means OFF.
Press and hold down the “ ” button for 2 seconds until the icon for the Temperature Alert” starts to flash
The icon of Upper limit of the Temperature alarm starts to flash. Use the “
▲ ” and “▼” buttons to set the required maximum temperature. Press “ ” to confirm your setting.
The icon of the Lower limit of the Temperature alarm starts to flash. Use the “
▲ ” and “▼” buttons to set the required minimum temperature. Press “ ” button to confirm your setting and to end the setting procedure
Temperature and Frost Alert
Press “ ” button to activate or deactivate the remote temperature alert, When the remote temperature alarm is activated, the temperature alarm icon is displayed in the remote sensor bar
When the remote channel temperature value exceeds the set temperature range, will activate the alarm, the weather station will every minute continuous alarm 5 times, at the same time, temperature alarm in alarm icon “ ” flashes, its temperature value and alarm upper limit icon “Hi” or lower limit icon “Lo” also flashes
When the temperature of outdoor sensor is –1°C (+30°F) to + 3°C (+ 37°F), the frost alarm will be activated, the frost alert icon “ ” flashing.
F.Y.I.:
When the temperature is higher than the upper limit of the alarm temperature setting, the activation of the upper limit alarm, symbol “Hi” flashing,
When the temperature is lower than the lower limit of the alarm temperature, the lower limit alarm is activated, and the symbol “Lo” flashes
Low battery:
If the battery icon “ ” appears the batteries in the outdoor sensor should be replaced as soon as possible.
The Weather Forecast:
The weather station calculates a weather forecast for about the next 12 hours based on the barometric pressure trend.
Of course this forecast can‘t compare to that of professional weather services supported by satellites and high performance computers, but merely provides an approximate indication of current developments. Please take the
FJ3373 Manual weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
The weather station displays the following weather icon: slightly cloudy sunny cloudy rainy Heavy rainy Snowy
The weather station can display the barometric pressure trend.
You may see the following displays:
The barometric pressure will rise.
The barometric pressure will remain constant.
The barometric pressure will fall.
Background Lighting
If the product is powered by batteries, touch the top of main station or press the “ ” button. Backlight lit 15 seconds.
When the power supply of the product is inserted into the power supply adapter, the battery will automatically disconnect the power supply, and the backlight will always be bright. Press the button to adjust the brightness of the backlight, you can adjust the 4 state: 3 different brightness backlight and close the backlight.
When the backlight brightness is not at the maximum brightness,
touch the top of main station or press the “ turns to maximum brightness of 15 seconds.
” button. Backlight
EU Add:
FANJU TECHNOLOGY LTD
FIFTH FLOOR,3 GOWER STREET , LONDON,WC1E
6HA,UNITED KINGDOM
China Add:
