ELECTRIC FOOT WARMER
10861
Instructions for Use
Please read and retain these instructions for future reference v001:09/05/17
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Power Details: 220-240V
100W
50Hz
PRODUCT OVERVIEW
4
3
2
1
1.
Foot warmer
2.
Mains cable
3.
Operating indicator
4.
Switch 0-1-2-3
Please read this instruction manual thoroughly before starting and ensure you are familiar with the operation of your new foot warmer.
ELECTRIC FOOT WARMER
10861
Instructions for Use
Please read and retain these instructions for future reference v001:09/05/17
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE POWER CABLE, PLUG OR
APPLIANCE IN WATER OR ANY OTHER LIQUID.
UNPLUG FROM POWER OUTLET WHEN NOT IN USE AND BEFORE CLEANING. ALLOW THE
FOOTWARMER TO COOL THOROUGHLY BEFORE PUTTING ON OR TAKING OFF ANY PARTS.
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED POWER CABLE OR PLUG OR AFTER
THE APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE
RECOMMEND THAT THE POWER CABLE IS NOT KINKED OR STORED IN A TWISTED MANNER,
AND THAT YOU REGULARLY CHECK ITS CONDITION.
THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED MAY CAUSE INJURIES
AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
DO NOT USE OUTDOORS.
DO NOT LET POWER CABLE HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH
HOT SURFACES.
DO NOT PLACE ON OR NEAR HEAT SOURCES, AND USE ON A LEVEL, STABLE SURFACE.
DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
DO NOT PLACE UNDER OR NEAR FLAMMABLE MATERIALS SUCH AS CURTAINS, DRAPERIES,
SHELVES, LOOSE WALL PAPER ETC.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED
FOR.
ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLAINCE AND OTHER ITEMS ON
THE WORK SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE
APPLIANCE AND THE CONFINES OF THE AREA IN WHICH IT IS SITUATED. WE RECOMMEND A
MINIMUM CLEARANCE AROUND ALL FACES OF AT LEAST 10CM.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE
INTERNAL DAMAGE.
BEFORE FIRST USE:
Inspect the product for completeness and damages. Should the delivery contents be incomplete or damaged, contact your sales outlet immediately.
OPERATION
1. Connect the power plug to the power socket.
2. Switch on the product.
ELECTRIC FOOT WARMER
10861
Instructions for Use
Please read and retain these instructions for future reference v001:09/05/17
HEAT SETTINGS
0 = OFF
1 = low heat
2 = medium heat
3 = high heat
• It takes approximately 15 minutes to reach the desired temperature. Remember that a temperature that feels warm on the hand may be extremely hot on the feet.
• You may notice a faint odour the first time the foot warmer is used. This odour is completely harmless, but be sure to air out the room after the foot warmer has been used for the first time.
• Begin by heating the foot warmer to the highest heat level. After 15 minutes the temperature can be set to the desired level.
• The foot warmer's heating function shuts off automatically after about 90 minutes. If you wish to reheat the foot warmer after about 90 minutes, simply set the heat level back to 0 for approximately five seconds. You can then select the desired heat level once again. The foot warmer is equipped with an overheating control.
• Unplug the foot warmer when it is not in use.
WARNING
• CHECK THE APPLIANCE AND POWER CABLE CAREFULLY FOR DAMAGE BEFORE EACH USE.
• KEEP THE APPLIANCE AWAY FROM CHILDREN.
• BEFORE CONNECTING THE APPLIANCE, CHECK IF THE VOLTAGE INDICATED ON THE BOTTOM
OF THE APPLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR HOME.
• THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND
PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF
EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION
CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER
MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
• SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND CAUSE BURNS. PARTICULAR
ATTENTION HAS TO BE GIVEN WHERE CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.
• CHILDREN OF LESS THAN 3 YEARS SHOULD BE KEPT AWAY UNLESS CONTINUOUSLY
SUPERVISED.
• DO NOT PLACE THIS ITEM IMMEDIATELY BELOW A SOCKET-OUTLET.
• KEEP ITEM AT LEAST 1M AWAY FROM COMBUSTIBLE MATERIAL SUCH AS FURNITURE,
CUSHIONS, BEDDING, PAPER, CLOTHES, CURTAINS ETC.
• DO NOT USE IF THE POWER CABLE OR PLUG IS DAMAGED. TO BE REPAIRED BY A QUALIFIED
ELECTRICIAN OR TO BE REPLACED BY THE MANUFACTURER, SERVICE AGENT OR SIMILARLY
QUALIFIED PERSON, IN ORDER TO AVOID A HAZARD.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is a
ELECTRIC FOOT WARMER
10861
Instructions for Use
Please read and retain these instructions for future reference v001:09/05/17 fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or office are not suitable for this product’s plug, the plug must be removed and disposed of safely. Attempts to insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of flexible plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
BLUE
BROWN
GREEN & YELLOW
NEUTRAL
LIVE
EARTH
The diagram below shows the key features of a correctly wired three-pin mains plug.
Note:
Double insulated appliances do not need the green & yellow Earth wire.
They may only have the Brown and
Blue wires.
CARE AND CLEANING INSTRUCTIONS
Always switch off and unplug before cleaning.
Do NOT immerse in water. Risk of electric shock.
Do NOT use abrasive cleaners or sharp utensils to clean this appliance.
Wipe surfaces with a soft dry cloth.
Allow to dry thoroughly before further use.
Store the unit in a cool, dry place.
DISPOSAL
• Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local recycling regulations.
• At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste recycling centre.
