AZZA Fusion 3000 User Manual

Add to my manuals
18 Pages

advertisement

AZZA Fusion 3000 User Manual | Manualzz

User

 

Manual

 

Model

 

No.:

  CSAZ

3000

 

Table   of   Contents  

Chapter   1.

  Product   Introduction  

Specification…………….……………………………………………………….….

    03  

Mechanical   Diagram   …………………………………………………………….

    04  

Accessories…………………….……………………………………………………..

    05  

Chapter   2.

  Installation  

Side   Panel   Disassembly………………………………………………….….……     06  

Motherboard   Installation……………………………………………….….…..

    07  

External   5.25”   Device   Installation………………………………….….…….

    08  

External   3.5”   Device   Installation.........................................

      09 ‐ 10  

External   2.5”   HDD   Installation………......……………………................

    11  

Power   Supply   Installation...........................................................

    12  

Fan   Installation   on   the   Side   Panel   ……………….…………..………..

    13 ‐ 14  

Fan   Installation   on   the   Top   Plate   ……………………….…………..……….

    15  

Bottom   Fan   Installation   (Optional)   …………………………..…………….

    16  

Water   Cooling   Installation       ……………………………………….………       17  

Front   I/O   Installation   Guide   .......................................................

    18  

Chapter   1.

  

Model:

 

Model   Name:  

Model   Number:  

Spec:

 

Type:  

Product   Introduction   

  

FUSION   3000  

CSAZ ‐ 3000  

  

ATX     Full   Tower    

Color:  

Material:  

Side   Panel   Window:  

With   Power   Supply:  

CPU   Cooler   Compatibility:  

Motherboard   Compatibility:  

Power   Supply   Locations:  

Expansion:  

External   5.25"   Drive   Bays:  

External   2.5"   Drive   Bays:  

Internal   3.5"   Drive   Bays:  

Easy   Swap   3.5"   HDD   Slot:  

Expansion   Slots:  

Black/Black   (inside   chassis)  

SECC  

Yes  

No   up   to   190mm  

XL ‐ ATX,E ‐ ATX,   Full   ATX,   Micro   ATX,     rear   bottom      

  

4  

4x   Easy   Swap   2.5"   slots  

2  

6x   Easy   Swap   3.5"     slots  

10  

Front   Ports:  

Cooling

 

System:

 

140mm   Fan:  

120mm   Fan:  

Physical

 

Spec:

 

Dimensions   (HxWxD):  

Weight:  

2x   USB   3.0,   1xUSB   2.0,   HD   audio,   Mic  

  

1x140mm   fan   (27.2dBA)   in   the   rear  

2x120mm   blue   LED   fans   in   the   front  

  

25.2"x10.2"x24"   (640   x   260   x   610   mm)  

30   lbs  

3

4

 

 

Accessories  

‐ Screw   bag   x   1  

‐ Stand   with   rubber   pad   x   2  

‐ User   Manual   x   1  

Standoff   for   M/B  

4.75H

‐ 6#*6.5H

 

 

Screw

3.5”  

  for

HDD

6*5KM  

 

 

Screw   for  

  2.5”   HDD  

3*5KM  

Screw   for   HDD   and   M/B  

6#*5B ‐ C  

 

 

 

 

 

 

 

15PCS  

Screw   for  

Stand  

    M4*10  

 

24PCS  

Screw   for  

Power   Supply  

6#6HW ‐ TC  

 

24PCS  

 

Cable   Tie  

L80mm  

15PCS  

 

 

 

8PCS  

 

4PCS   3PCS  

 

 

5

Chapter   2.

   Installation   Guide  

Side   Panel   Disassembly

1.

    To   take   off   the   side   panel   of   the   bottom   unit,   remove   the   thumb   screws   from  

        the   back   of   the   case,   then   pull   the   side   panel   toward   the   back   to   remove   it.

 

 

2.

To   place   the   side   panel   back,   align   the   side   panel   with   the   hook   holes   and   slide   the   panel   toward   the   front,   then   secure   the   panel   with   the   screws.

6

 

Motherboard   Installation  

1.

Install   the   I/O   panel   that   comes   with   your   motherboard   package.

 

 

2.

Aim   at   the   holes   on   the   motherboard,   and   secure   the   standoffs   on   the   motherboard   tray.

3.

Align   the   holes   of   motherboard   with   the   motherboard   tray.

  Then   secure   the   motherboard   with   the   provided   screws.

 

 

NOTE :   Instructions   on   CPU,   RAM   and   any   peripheral   installations   are   not   included   in   this   manual.

 

Please   refer   to   your   motherboard   and/or   other   manuals   for   related   mounting   instructions   and   troubleshooting.

 

7

External   5.25”   Device   Installation  

1.

From   the   interior   of   the   case,   use   a   firm   device   of   your   choice   to   push   the  

5.25”   drive   bay   cover   out.

   

2. Place   the   5.25”   device   into   the   drive   bay.

3.

Match   the   ODD   drive   holes   with   the   drive   cage.

  Then   turn   the   knob   clockwise   to   secure   the   drive   cage.

 

8

External   3.5”   Device   Installation  

1.

Pull   the   right   side   of   the   front   panel   gently   to   open   the   door.

 

2.

Remove   the   hard   drive   tray   by   pushing   the   tray   tab   to   the   right   to   release   the   hard   drive   tray.

 

9

3.

Install   hard   drive   by   placing   each   individually   into   the   hard   drive   tray.

    Secure   each   from   the   bottom   of   tray   with   the   provided   screws.

4. Place   the   tray   back   into   to   the   case   and   lock   it   in   place   by   pushing   the   tray   in.

 

The   rear   of   the   hard   drive   will   connect   to   the   backplane.

5.

Find   the   4 ‐ pin   Molex   on   the   power   supply   and   connect   it   to   the   backplane.

   

Connect   the   backplane   to   the   motherboard   using   the   SATA   cable   provided   by   your   motherboard   package.

 

10

External   2.5”   Hard   Drive   /   SSD   Installation

1.

Remove   the   2.5”   SSD   hard   drive   tray   by   pushing   the   tray   tab   to   the   right   to   release   the   tray.

2.

Place   2.5”   SSD   hard   drive   into   the   hard   drive   box.

  Close   the   box.

     

3.

Slide   the   2.5”   SSD   hard   drive   box   to   the   end   of   drive   cage.

 

11

Power   Supply   Installation  

1.

Place   the   power   supply   in   its   proper   location   and   secure   it   with   the   provided   screws.

2.

Simply   route   the   cables   behind   the   motherboard   tray   and   secure   them   with   the   provided   cable   tie.

 

3.

To   optimize   performance   it   is   recommended   that   the   washable   dust   filter   underneath   the   power   supply   be   cleaned   on   a   regular   basis.

    Simply   pull   out   the   dust   filter,   rinse   with   water,   and   slide   it   back   after   the   dust   filter   is   dried.

   

12

Fan   Installation  

Fan   Installation   on   the   Side   Panel  

1.

Take   out   the   dust   filter   from   the   side   panel.

 

 

2.

Unscrew   these   three   screws   from   the   back   of   the   side   panel.

 

 

3.

Pull   the   plastic   cover   backward   to   remove   the   cover  

 

 

13

     

4.

Install   the   fan   on   the   inside   of   the   side   panel   and   secure   it   from   the   outside   of   the   panel   with   the   provided   screws.

 

 

5.

Up   to   two   120mm   or   two   140mm   or   one   230mm   (in   both   directions)   fans   can   be   installed   on   the   left   side   panel.

 

6.

Pull   out   the   washable   dust   filter   from   the   side   panel   for   regular   cleaning.

 

14

 

Fan   Installation   on   the   Top   plate  

1.

Remove   the   thumb   screws   in   the   back,   slide   the   top   panel   toward   the   front   to   open   the   top   panel.

   

2.

Install   fans   on   the   top   plate   and   secure   with   the   provided   screws.

 

 

5.

Up   to   three   120mm   or   two   140mm   or   one   230mm   fan   can   be   installed.

 

15

 

Bottom   Fan   Installation   (optional)  

1.

Turn   the   case   upside   down   and   install   the   fan   in   the   base   of   the   case.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Up   to   two   120mm   or   one   140mm   or   one   230mm   fans   can   be   installed   on   the   bottom.

 

16

 

Water   Cooling   Installation  

1.

To   install   an   external   water   cooling   system,   use   the   pre ‐ drilled   holes   located   in   the   back   to   connect   the   tubes.

   

 

 

 

 

2.

A   360   mm   radiator   may   be   installed   on   the   top   plate   using   the   pre ‐ drilled   screw   holes.

 

 

 

17

Front   I/O   Installation   Guide

Please refer to the illustration on the section of USB and Audio connector from the motherboard user’s manual.

The following illustration is a connection diagram for the front panel I/O cable. Please check your motherboard manual before installing.

I/O   Connector  

18

 

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement