IE-V850E-MC

IE-V850E-MC
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
User’s Manual
IE-V850E-MC,
IE-V850E-MC-A
In-Circuit Emulator
Target Devices
V850E1 (NB85E Core)
TM
V850E/MA1
TM
V850E/MA2
TM
V850E/SV2
TM
V850E/IA1
TM
V850E/IA2
Document No. U14487EJ2V0UM00 (2nd edition)
Date Published September 2003 N CP(K)
1999
Printed in Japan
[MEMO]
2
User’s Manual U14487EJ2V0UM
V850 Series, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1, and V850E/IA2 are trademarks of NEC
Electronics Corporation.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or
other countries.
PC/AT is a trademark of International Business Machines Corporation.
Ethernet is a trademark of Xerox Corporation.
• The information in this document is current as of March, 2003. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
User’s Manual U14487EJ2V0UM
3
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
Electronics product in your application, pIease contact the NEC Electronics office in your country to
obtain a list of authorized representatives and distributors. They will verify:
•
Device availability
•
Ordering information
•
Product release schedule
•
Availability of related technical literature
•
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
•
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
[GLOBAL SUPPORT]
http://www.necel.com/en/support/support.html
NEC Electronics America, Inc. (U.S.)
NEC Electronics (Europe) GmbH
NEC Electronics Hong Kong Ltd.
Santa Clara, California
Tel: 408-588-6000
800-366-9782
Duesseldorf, Germany
Tel: 0211-65 03 01
Hong Kong
Tel: 2886-9318
• Sucursal en España
Madrid, Spain
Tel: 091-504 27 87
• Succursale Française
Vélizy-Villacoublay, France
Tel: 01-30-67 58 00
• Filiale Italiana
Milano, Italy
Tel: 02-66 75 41
• Branch The Netherlands
Eindhoven, The Netherlands
Tel: 040-244 58 45
• Tyskland Filial
Taeby, Sweden
Tel: 08-63 80 820
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: 02-558-3737
NEC Electronics Shanghai, Ltd.
Shanghai, P.R. China
Tel: 021-6841-1138
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-2719-2377
NEC Electronics Singapore Pte. Ltd.
Novena Square, Singapore
Tel: 6253-8311
• United Kingdom Branch
Milton Keynes, UK
Tel: 01908-691-133
J03.4
4
User’s Manual U14487EJ2V0UM
Major Revisions in This Edition
Page
Description
Throughout
• Addition of V850E/MA2, V850E/SV2, and V850E/IA2 as target devices
• Addition of IE-70000-PCI-IF-A as corresponding PC interface board
• Modification of IE-V850E-MC-A shape
p.11
1.1 Hardware Configuration
• Addition of IE-703166-MC-EM1 and IE-703114-MC-EM1 as option boards
• Addition of SWEX-xxxSD-1 as extension probe
p.13
1.3 Function Specifications
• Thorough modification
P.13 in the previous
edition
Deletion of 1.4 Hardware Configuration
p.14
1.4 System Configuration
• Addition of SWEX-xxxSD-1 as extension probe
• Addition of descriptions about connector configurations
p.17
1.6.1 When using IE-V850E-MC-A on a standalone basis for performing software
debugging
• Addition and modification of descriptions
p.18
1.6.2 When performing hardware debugging with target system
• Addition and modification of descriptions
p.21
2.2 Pod Part Names and Functions
• Thorough modification
p.24
3.1.3 Insertion of PC interface board
• Addition and modification of descriptions
p.25
3.2 Connection to Target System
• Modification of descriptions in (1)
• Figure 3-1 Connection of Connector for Target Connection and Connector for
Emulator Connection divided according to target device
p.31
3.3.1 Power adapter connection
• Addition of description to Caution
p.32
3.3.4 Additional information
• Addition of description to procedure
p.33
3.4.1 Power-on procedure
• Modification of procedure
p.33
3.4.2 Power-off procedure
• Modification of procedure
p.34
Addition of CHAPTER 4 SHIPMENT SETTINGS
p.36
Addition of APPENDIX B REVISION HISTORY
The mark
shows major revised points.
User’s Manual U14487EJ2V0UM
5
INTRODUCTION
Target Readers
This manual is intended for users who design and develop application systems using
V850E1,
V850E/MA1,
V850E/MA2,
V850E/SV2,
V850E/IA1,
and
V850E/IA2
microcontrollers.
Purpose
Debugging can be performed efficiently with these emulators (IE-V850E-MC, IEV850E-MC-A) connected to a dedicated option board when designing and developing
application systems using V850E1, V850E/MA1, V850E/MA2, V850E/SV2, V850E/IA1,
and V850E/IA2 microcontrollers.
The purpose of this manual is to describe the proper operation of the IE-V850E-MC
and IE-V850E-MC-A and their basic specifications.
Organization
This manual is broadly divided into the following parts.
How to Read This Manual
• Overview
• Connection of parts
• Names and functions of parts
• Shipment settings
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers.
To learn about the basic specifications and operation
→Read this manual in the order listed in CONTENTS.
To learn the operation methods, command functions, etc., of the IE-V850E-MC or IEV850E-MC-A
→Read the user’s manual of the debugger (sold separately) that is used.
Conventions
Note:
Footnote for item marked with Note in the text
Caution:
Information requiring particular attention
Remark:
Supplementary information
Binary … ×××× or ××××B
Numeral representation:
Decimal ... ××××
Hexadecimal ... ××××H
Prefix representing a power of 2 (address space, memory capacity):
K (kilo):
10
2 = 1024
20
M (mega):2 = 1024
Terminology
6
2
The meanings of terms used in this manual are listed below.
Target device
This is the device to be emulated.
Target system
The system (user-built system) to be debugged.
configured by the user.
Emulation CPU
Device that performs emulation of the target device in the IE-V850E-MC, IE-V850E-MC-A.
This includes the target program and hardware
User’s Manual U14487EJ2V0UM
Product Name in This Manual
In this manual, unless otherwise specified, the IE-V850E-MC-A is treated as the
representative model. When this manual is used as the IE-V850E-MC manual,
replace IE-V850E-MC-A with IE-V850E-MC.
For the functional differences between the IE-V850E-MC and the IE-V850E-MCA, refer to CHAPTER 1 OVERVIEW.
Related Documents
When using this manual, refer to the following manuals.
The related documents (user’s manuals) indicated in this publication may include
preliminary versions. However, preliminary versions are not marked as such.
Documents Related to Development Tools (User’s Manuals)
Document Name
Document Number
V850E1 Architecture
U14559E
V850E/MA1 Hardware
U14359E
V850E/MA2 Hardware
U14980E
V850E/IA1 Hardware
U14492E
V850E/IA2 Hardware
U15195E
V850E/SV2 Hardware
U16384E
IE-V850E-MC, IE-V850E-MC-A (In-Circuit Emulator)
This manual
IE-703107-MC-EM1 (In-Circuit Emulator Option Board)
U14481E
IE-703114-MC-EM1 (In-Circuit Emulator Option Board)
To be prepared
IE-703116-MC-EM1 (In-Circuit Emulator Option Board)
U14700E
IE-703166-MC-EM1 (In-Circuit Emulator Option Board)
To be prepared
IE-V850E-MC-EM1-A (In-Circuit Emulator)
To be prepared
IE-V850E-MC-EM1-B, IE-V850E-MC-MM2 (In-Circuit Emulator Option Board)
U14482E
V850 SeriesTM Development Tools (Supporting
32-Bit OS) WindowsTM Based (Application Note)
Tutorial Guide
U16544E
CA850 Ver.2.50 C Compiler Package
Operation
U16053E
C Language
U16054E
Assembly Language
U16042E
PM plus Ver.5.10
U16559E
ID850 Ver.2.50 Integrated Debugger
Operation Windows based
U16217E
SM850 Ver.2.50 System Simulator
Operation Windows based
U16218E
RX850 Ver.3.13 or Later (Real-Time OS)
Basics
U13430E
Installation
U13410E
RX850 Pro Ver.3.13 (Real-Time OS)
Technical
U13431E
Basics
U13773E
Installation
U13774E
Technical
U13772E
Note
RD850 (Task Debugger)
U11158E
RD850 Ver.3.01 Task Debugger
U13737E
RD850 Pro Ver.3.01 Task Debugger
U13916E
AZ850 Ver.3.10 System Performance Analyzer
U14410E
PG-FP4 Flash Memory Programmer
U15260E
Note ID850 (Ver.1.31 only) supported
User’s Manual U14487EJ2V0UM
7
CONTENTS
CHAPTER 1 OVERVIEW ................................................................................................................. 10
1.1 Hardware Configuration ....................................................................................................... 11
1.2 Features.................................................................................................................................. 12
1.3 Function Specifications........................................................................................................ 13
1.4 System Configuration ........................................................................................................... 14
1.5 Contents in Carton ................................................................................................................ 15
1.6 Setup....................................................................................................................................... 17
1.6.1 When using the IE-V850E-MC-A on a stand-alone basis for performing software debugging .... 17
1.6.2 When performing hardware debugging with target system ......................................................... 18
CHAPTER 2 PART NAMES AND FUNCTIONS........................................................................... 19
2.1 Main Unit Part Names and Functions.................................................................................. 20
2.2 Pod Part Names and Functions ........................................................................................... 21
CHAPTER 3 CONNECTION OF COMPONENTS ......................................................................... 23
3.1 Connection to Personal Computer ...................................................................................... 23
3.1.1 Overview of connection ............................................................................................................... 23
3.1.2 Connection procedure ................................................................................................................. 23
3.1.3 Insertion of PC interface board .................................................................................................... 24
3.1.4 Connection of PC interface cable ................................................................................................ 24
3.2 Connection to Target System .............................................................................................. 25
3.3 Cable Connections................................................................................................................ 31
3.3.1 Power adapter connection ........................................................................................................... 31
3.3.2 PC interface cable connection..................................................................................................... 31
3.3.3 External logic probe connection .................................................................................................. 32
3.3.4 Additional information .................................................................................................................. 32
3.4 System Power-On and Power-Off ........................................................................................ 33
3.4.1 Power-on procedure .................................................................................................................... 33
3.4.2 Power-off procedure .................................................................................................................... 33
CHAPTER 4 SHIPMENT SETTINGS................................................................................................ 34
APPENDIX A
DIMENSIONS ............................................................................................................ 35
APPENDIX B REVISION HISTORY.................................................................................................. 36
8
User’s Manual U14487EJ2V0UM
LIST OF FIGURES
Figure No.
Title
Page
1-1 System Configuration (QFP Package)...................................................................................................................14
1-2 Contents in Carton.................................................................................................................................................15
1-3 Accessories ...........................................................................................................................................................16
2-1 IE-V850E-MC-A .....................................................................................................................................................19
2-2 Main Unit ...............................................................................................................................................................20
2-3 Pod (Top View)......................................................................................................................................................21
2-4 Pod (Bottom View).................................................................................................................................................22
3-1 Connecting to Target System ................................................................................................................................25
3-2. Direction Marking for Pin 1 of Connector (Top View) ............................................................................................29
3-3 Connection of IE-V850E-MC-A to Target System .................................................................................................30
3-4 Power Adapter Connection....................................................................................................................................31
3-5 PC Interface Cable Connection .............................................................................................................................31
3-6 External Logic Probe Connection (Using IC Clip)..................................................................................................32
User’s Manual U14487EJ2V0UM
9
CHAPTER 1
OVERVIEW
The IE-V850E-MC-A and IE-V850E-MC are in-circuit emulators that are used to efficiently debug hardware and
software during the development of systems that employ the V850E1, V850E/MA1, V850E/MA2, or V850E/SV2, and
the V850E/IA1 or V850E/IA2, respectively.
They incorporate functions such as a break/trace function using events, a coverage function for program
performance evaluation, and a timer/counter function.
To perform debugging, the option board (sold separately) corresponding to the relevant device product must be
connected.
The IE-V850E-MC is an in-circuit emulator for VDD = 5.0 V.
The IE-V850E-MC-A is an in-circuit emulator for VDD = 3.3 V.
10
User’s Manual U14487EJ2V0UM
CHAPTER 1 OVERVIEW
1.1
Hardware Configuration
In-circuit emulator (IE-V850E-MC-A)
Separately sold hardware
Note
Option board
IE-703107-MC-EM1
IE-703114-MC-EM1
IE-703116-MC-EM1
IE-703166-MC-EM1
The IE-V850E-MC-A can be used as an in-circuit
emulator of the V850E1, V850E/MA1, V850E/MA2,
V850E/SV2, V850E/IA1, and V850E/IA2 by
connecting these boards.
Extension probe
SC-×××SDNNote
SWEX-×××SD-1Note
General-purpose extension probe. Product of
TOKYO ELETECH CORPORATION.
PC interface board
IE-70000-PCI-IF
IE-70000-PCI-IF-A
IE-70000-CD-IF-A
These boards are used to connect the IE-V850EMC-A to a personal computer. These boards are
added into the expansion slot of a personal
computer.
IE-70000-PCI-IF:
For PCI bus (discontinued)
IE-70000-PCI-IF-A: For PCI bus
IE-70000-CD-IF-A: For PCMCIA socket
Network module
(IE-70000-MC-SV3)
This module is used when a workstation controls
the IE-V850E-MC-A via EthernetTM.
Power adapter
(IE-70000-MC-PS-B)
AC adapter dedicated to NEC Electronics in-circuit
emulators.
For further information, contact Daimaru Kogyo., Ltd.
Tokyo Electronic Components Division (TEL +81-3-3820-7112)
Osaka Electronic Components Division (TEL +81-6-6244-6672)
Caution
Be aware that, depending on the operating frequency of the emulator, use of an extension
probe may cause abnormal operation.
User’s Manual U14487EJ2V0UM
11
CHAPTER 1 OVERVIEW
1.2
Features
{ Maximum operating frequency: 50 MHz (at VDD = 3.3 V, 5.0 V)
{ Extremely lightweight and compact
{ Higher equivalence with target device can be achieved by omitting buffer between signal cables
{ The following pins can be masked
RESET, NMI, WAIT, HLDRQ
{ The dimensions and environmental conditions for operation are as follows
Parameter
Value
Maximum operating frequency
50 MHz
Supply voltage (DC)
5V
Operating voltage (DC)
VDD = 3.3 V (IE-V850E-MC-A), 5.0 V (IE-V850E-MC)
Power consumption
11 W (operating frequency: 50 MHz)Note
External dimensions
(Refer to APPENDIX A DIMENSIONS)
Height
56 mm
Length
353 mm
Width
90 mm
Weight
500 g
Operating temperature range
0 to 40°C
Storage temperature range
0 to 45°C
Ambient humidity range
10 to 80% RH
Note
12
The power consumption is 11.4 W when the option board is connected to the IE-V850E-MC-A.
User’s Manual U14487EJ2V0UM
CHAPTER 1 OVERVIEW
1.3
Function Specifications
Item
Emulation memory capacity
Specification
Internal ROM
1 MB (max.)
External memory
Note
Execution/pass detection (coverage memory capacity)
1 MB (max.)
Program execution function
Real-time execution function
Go, Execution from cursor position, Automatic Go,
Execution up to cursor position, Restart, Return out
Non-real-time execution function
Step-in, next over, slow-motion
Break function
Event detection break, software break, forced break,
break via come function, break on condition met during
step execution, failsafe break
Trace function
Other functions
Note
Trace condition
All trace, section trace, qualify trace
Memory capacity
168 bits × 32 K frames
Mapping function, event function, coverage
measurement function, snapshot function, stub
function, register manipulation function, memory
manipulation function, time measurement function,
real-time RAM sampling function
External emulation memory is not mounted on the IE-V850E-MC-A.
External emulation memory is
mounted on the separately-sold option board, so refer to the option board user’s manual.
Caution
Some of the functions may not be supported depending on the debugger used.
User’s Manual U14487EJ2V0UM
13
CHAPTER 1 OVERVIEW
1.4
System Configuration
The system configuration when connecting the option board to the IE-V850E-MC-A, which is then connected to a
personal computer (PC-9800 series, PC/AT
TM
or compatible) is illustrated below.
The connector configuration varies depending on the target device. For details, refer to the user’s manual of the
option board.
Figure 1-1. System Configuration (QFP Package)
<13>
<6>
<14>
<7>
<12>
<4>
<8>
<9>
Target
system
<10>
<3>
<9>
<10>
<11>
Device
<1>, <2>
<11>
<10>
Target system
Remarks 1. <1> Personal computer (PC-9800 series, PC/AT or compatible)
<2> Debugger (sold separately), device file (available separately)
<3> PC interface board
(IE-70000-PCI-IF, IE-70000-PCI-IF-A, IE-70000-CD-IF-A: sold separately)
<4> PC interface cable (included)
<5> IE-V850E-MC-A (in-circuit emulator)
<6> Option board (sold separately)
<7> External logic probe (included with option board)
<8> Extension probe (SC-×××SDN, SWEX-×××SD-1: sold separately)
<9> Connector for emulator connection (YQPACK×××SD: included with option board)
<10>Connector for target connection (NQPACK×××SD: included with option board)
<11>Device mounting cover (HQPACKxxxSD: included with option board)
<12>Power adapter (IE-70000-MC-PS-B: sold separately)
<13>AC100 V power cable (sold separately: included with IE-70000-MC-PS-B)
<14>AC220 V power cable (sold separately: included with IE-70000-MC-PS-B)
2. The encircled portions show enlarged figures of the connectors for target connection.
14
User’s Manual U14487EJ2V0UM
Target
system
CHAPTER 1 OVERVIEW
1.5
Contents in Carton
The carton of the IE-V850E-MC-A contains a main unit, guarantee card, packing list, and accessory bag.
Make sure that the accessory bag includes this manual and cables. In case of missing or damaged contents,
please contact an NEC Electronics sales representative or distributor.
Figure 1-2. Contents in Carton
<1> IE-V850E-MC-A
<4> Packing list
<3> Guarantee card
<2> Accessory bag
<1> IE-V850E-MC-A × 1
<2> Accessory bag × 1
<3> Guarantee card × 1
<4> Packing list × 1
User’s Manual U14487EJ2V0UM
15
CHAPTER 1 OVERVIEW
Check that the accessory bag contains this manual, an accessory list, and the following accessories.
(a) PC interface cable × 2 (for the IE-70000-PCI-IF, IE-70000-PCI-IF-A × 1, for the IE-70000-CD-IF-A × 1)
(b) Plastic spacer × 2 sets
(including 2 plastic screws and 2 washers)
(c) Nylon rivet × 4
Figure 1-3. Accessories
(a) PC interface cable
16
(b) Plastic spacers
User’s Manual U14487EJ2V0UM
(c) Nylon rivets
CHAPTER 1 OVERVIEW
1.6
Setup
The following two system configurations for the IE-V850E-MC-A are possible, depending on the purpose.
This section describes the setup procedure according to each purpose as follows.
Step
Reference section
1.6.1 When using the IE-V850E-MC-A on a standalone basis for performing software debugging
(1)
Connect interface board to PC
3.1 Connection to Personal Computer
Before connecting, make sure that the power of the PC is off (when using PCI bus).
(2)
Connect option board
Refer to the user’s manual of the option board
(3)
Set clock operation mode of IE-V850E-MC-A
Refer to the user’s manual of the option board
(4)
Set CPU operating voltage range
Refer to the user’s manual of the option board
Switch CPU operating voltage range.
(5)
Connect cables
3.3 Cable Connections
Connect power source adapter and interface cable.
(6)
Power up IE-V850E-MC-A
3.4 System Power-On and Power-Off
(7)
Start debugger
3.4 System Power-On and Power-Off
User’s Manual U14487EJ2V0UM
17
CHAPTER 1 OVERVIEW
1.6.2 When performing hardware debugging with target system
Caution
Before turning on the power of the target system, make sure that the power of the IE-V850EMC-A is turned on. If the target system is turned on while the IE-V850E-MC-A is off, the target
system or the IE-V850E-MC-A may be damaged.
(1)
Connect interface board to PC
3.1 Connection to Personal Computer
Before connecting, make sure that the power of the PC is off (when using PCI bus).
(2)
Connect option board
Refer to the user’s manual of the option board
(3)
Set clock operation mode of IE-V850E-MC-A
Refer to the user’s manual of the option board
(4)
Set CPU operating voltage range
Refer to the user’s manual of the option board
Switch CPU operating voltage range.
(5)
Connect cables
3.3 Cable Connections
Connect power source adapter and interface cable.
(6)
Connect IE-V850E-MC-A to target system
3.2 Connection to Target System
There are two connection methods: connecting the connection tab of the option board to the target system
directly, and connecting the connection tab of the option board to the target system via an extension probe
(sold separately).
18
(7)
Power up IE-V850E-MC-A, then target system
3.4 System Power-On and Power-Off
(8)
Start debugger
3.4 System Power-On and Power-Off
User’s Manual U14487EJ2V0UM
CHAPTER 2
PART NAMES AND FUNCTIONS
This chapter describes the name and function of each part of the IE-V850E-MC-A, as well as switch settings.
Figure 2-1. IE-V850E-MC-A
Pod
Main unit
User’s Manual U14487EJ2V0UM
19
CHAPTER 2
2.1
PART NAMES AND FUNCTIONS
Main Unit Part Names and Functions
Figure 2-2. Main Unit
PC interface connector
LED
Power switch
Power jack
(1) Power switch
This is the main power ON/OFF switch of the IE-V850E-MC-A.
The ON/OFF direction is printed on the chassis of the main part.
(2) Power jack
A power adapter (IE-70000-MC-PS-B: sold separately) is connected here.
(3) PC interface connector
The PC interface cable (included) is connected here.
(4) LED
Lit when the power is on, extinguished when the power is off.
20
User’s Manual U14487EJ2V0UM
CHAPTER 2
2.2
PART NAMES AND FUNCTIONS
Pod Part Names and Functions
Figure 2-3. Pod (Top View)
Direction of A1 pin on
emulation CPU
1
2
A1
TP2
GND
JP2
Emulation CPU
TP1
11
12
TRG
L
E
D
Memory
TP3
LD2
LD1
FPGA
(1) Test pins
TP1: For shipment test
TP2: Ground
TP3: Ground
(2) JP2
The setting varies depending the option board to be set. For how to set, refer to the manual of the option board
(unless specified, use this jumper with the shipment setting. After shipment, the jumper is set with 1 and 2
shorted and 7 and 8 shorted).
(3) LD1, LD2
Name
LD1 (red)
LD2 (amber)
Status
Description
On
Switch of main unit = On
Off
Switch of main unit = Off
On
Power supply of target system = On
Off
Power supply of target system = Off
User’s Manual U14487EJ2V0UM
21
CHAPTER 2
PART NAMES AND FUNCTIONS
Figure 2-4. Pod (Bottom View)
Option board connection pin
(1) Option board connection pin
Connect this pin to the PGA socket on the option board (sold separately) side.
22
User’s Manual U14487EJ2V0UM
CHAPTER 3
CONNECTION OF COMPONENTS
The IE-V850E-MC-A enables debugging and programming of target devices by connecting several components
and configuring the desired system.
This chapter describes the various components and their connection. Read this chapter when connecting system
components. For the sequence of system configuration, refer to 1.6 Setup.
For details of software startup, refer to the user’s manual of the debugger that is used.
3.1
Connection to Personal Computer
3.1.1 Overview of connection
The IE-V850E-MC-A can use a personal computer (PC-9800 series, or PC/AT compatible) as the host machine.
The connection to each type of personal computer is described below.
(1) Desktop PC
When using a desktop PC, insert the following PC interface board in the external expansion slot of the desktop
PC and connect the computer to the IE-V850E-MC-A.
• IE-70000-PCI-IF, IE-70000-PCI-IF-A: For PCI bus (can also be used in a PC98-NX series and PC/AT or
compatible)
(2) Notebook-type personal computer
When using a notebook-type personal computer, insert the PC card interface (IE-70000-CD-IF-A: sold
separately) in the PC card slot of the computer and connect the computer to the IE-V850E-MC-A.
3.1.2 Connection procedure
(1) Powering off
Perform connection while the power of each unit is off.
If the power of the IE-V850E-MC-A or the PC is on, turn off the power first.
(2) PC interface board setting
When the IE-70000-PCI-IF and IE-70000-PCI-IF-A are shipped, an 8-bit connector board is premounted.
However, when the IE-V850E-MC-A is connected, this must be changed to a 32-bit connector board.
The 32-bit connector board is supplied with the IE-70000-PCI-IF and IE-70000-PCI-IF-A. For details, refer to the
IE-70000-PCI-IF, IE-70000-PCI-IF-A User’s Manual (to be prepared).
User’s Manual U14487EJ2V0UM
23
CHAPTER 3
CONNECTION OF COMPONENTS
3.1.3 Insertion of PC interface board
Mount the PC interface board on the PC following the instructions described in the user’s manual of the PC.
When connecting the IE-70000-PCI-IF or IE-70000-PCI-IF-A, turn off the power to the PC first.
3.1.4 Connection of PC interface cable
Connect the PC interface cable to the interface board connector.
24
User’s Manual U14487EJ2V0UM
CHAPTER 3
3.2
CONNECTION OF COMPONENTS
Connection to Target System
There are two connection methods: connecting the connection tab of the option board to the target system directly
and connecting the connection tab of the option board to the target system via an extension probe.
(1) Connect the connectors to the target system. The connection methods vary depending on the target device, so
connect as shown in the figures below.
Figure 3-1. Connecting to Target System (1/5)
(a) When the target device is the V850E/MA1 (QFP package), V850E/IA1, V850E/IA2 (GC package)
YQGUIDE
<3>
<3>
YQPACKxxxSD
<2>
NQPACKxxxSD
<1>
Target system
<1> Fix to the specified position by soldering.
<2> Insert.
<3> Fix using YQGUIDE.
Caution The direction of pin 1 is indicated on the NQPACKxxxSD. Refer to Figure 3-2.
User’s Manual U14487EJ2V0UM
25
CHAPTER 3
CONNECTION OF COMPONENTS
Figure 3-1. Connecting to Target System (2/5)
(b) When the target device is the V850E/MA2
VP-V850E/MA1-MA2
<4>
YQGUIDE
<3>
<3>
YQPACK100SD
<2>
NQPACK100SD
<1>
Target system
<1> Fix to the specified position by soldering.
<2> Insert.
<3> Fix using YQGUIDE.
<4> Insert the VP-V850E/MA1-MA2.
Caution The direction of pin 1 is indicated on the NQPACK100SD. Refer to Figure 3-2.
26
User’s Manual U14487EJ2V0UM
CHAPTER 3
CONNECTION OF COMPONENTS
Figure 3-1. Connecting to Target System (3/5)
(c) When the target device is the V850E/IA2 (GF package)
NEXB-2R100SD/RB
<4>
YQGUIDE
<3>
<3>
YQPACK100SD
<2>
NQPACK100SD
<1>
Target system
<1> Fix to the specified position by soldering.
<2> Insert.
<3> Fix using YQGUIDE.
<4> Insert the NEXB-2R100SD/RB.
Caution The direction of pin 1 is indicated on the NQPACK100RB. Refer to Figure 3-2.
User’s Manual U14487EJ2V0UM
27
CHAPTER 3
CONNECTION OF COMPONENTS
Figure 3-1. Connecting to Target System (4/5)
(d) When the target device is the V850E/MA1 (BGA package)
YQGUIDE
<4>
<4>
CSICE161A1413N02
<3>
LSPACK161A1413N01
<2>
Note
CSSOCKET161A1413N01N
<1>
<1> Fix to the specified position by soldering.
(Align the misinsertion prevention pins of both the CSSOCKET and the target
system sides.)
<2> Insert LSPACK in CSSOCKET.
<3>, <4> Fix CSICE using YQGUIDE.
Caution The target connection connector is a guideless type. If a guide is required, use
the part whose part number is not suffixed with N.
28
User’s Manual U14487EJ2V0UM
CHAPTER 3
CONNECTION OF COMPONENTS
Figure 3-1. Connecting to Target System (5/5)
(e) When the target device is the V850E/SV2
CSICE257B2014N01
<2>
BSSOCKET257B2014N01
<1>
Target system
<1> Fix to the specified position by soldering.
(Align the misinsertion prevention pins of both the BSSOCKET and the target
system sides.)
<2> Insert CSICE in BSSOCKET.
Figure 3-2. Direction Marking for Pin 1 of Connector (Top View)
Pin 1 direction
Connection tab
of option board
Connector for target connection
(NQPACK×××SD)
User’s Manual U14487EJ2V0UM
29
CHAPTER 3
CONNECTION OF COMPONENTS
(2) Connect the connection tab of the option board to the target system directly or via the extension probe.
In either case, make sure that the pin 1 position (cutout corner of connector) is aligned.
The connection procedure is as follows.
Caution
Be careful not to break or bend the pins of connector, socket, and extension probe when
connecting.
(a) When connecting to target system directly
<1> Turn off the power of the IE-V850E-MC-A (power switch OFF).
<2> Connect the IE-V850E-MC-A to the option board.
<3> Connect the connection tab of the option board to the target system.
(b) When connecting to target system via extension probe
<1> Turn off the power of the IE-V850E-MC-A (power switch OFF).
<2> Connect the IE-V850E-MC-A to the option board.
<3> Connect the extension probe to the option board.
<4> Connect the top of the extension probe to the target system.
Figure 3-3. Connection of IE-V850E-MC-A to Target System
When directly connecting
target system
When using
extension probe
Target system
30
User’s Manual U14487EJ2V0UM
CHAPTER 3
3.3
CONNECTION OF COMPONENTS
Cable Connections
3.3.1 Power adapter connection
Insert the cable of the power supply adapter (IE-70000-MC-PS-B: sold separately) to the power jack of the IEV850E-MC-A main unit.
Caution
Use only the IE-70000-MC-PS-B for supplying power. Use of other power supplies may damage
the IE-V850E-MC-A due to differences in the power jack polarity, voltage, and power supply
capacitance.
Figure 3-4. Power Adapter Connection
Power jack
Power adapter (IE-70000-MC-PS-B)
3.3.2 PC interface cable connection
Connect the PC interface cable to the PC interface connector of the IE-V850E-MC-A main unit.
Figure 3-5. PC Interface Cable Connection
PC interface connector
PC interface cable
User’s Manual U14487EJ2V0UM
31
CHAPTER 3
CONNECTION OF COMPONENTS
3.3.3 External logic probe connection
When using the external logic probe, connect it to the option board connector.
For details, refer to the option board user’s manual.
3.3.4 Additional information
The IE-V850E-MC-A can perform real-time tracing of the emulation CPU bus cycle. In addition, an external logic
probe is included with the option board for the following three functions.
For details on its use, refer to the debugger user’s manual.
(1) Any eight signals can be traced in real time.
(2) Tracer start/stop is enabled using any eight signals.
(3) Break setting is enabled using any eight signals.
Cautions 1. Connect the external logic probe only to a TTL-level signal line. The high level and low level
cannot be detected correctly if connected to lines other than TTL-level signal lines. Note that
the sensor of the IE-V850E-MC-A and option board may be damaged by an excessive voltage
level.
2. When connecting the external logic probe, use a commercially available IC clip.
Procedure
(1) Turn off the power of the target system.
(2) Turn off the power of the IE-V850E-MC-A.
(3) Attach an IC clip to any device on the target system.
(4) Connect the external logic probe to the attached IC clip.
(5) Connect the GND of the external logic probe to the ground of the target system.
Figure 3-6. External Logic Probe Connection (Using IC Clip)
Target system
External logic probe
IC clip
32
User’s Manual U14487EJ2V0UM
CHAPTER 3
3.4
CONNECTION OF COMPONENTS
System Power-On and Power-Off
After connecting the IE-V850E-MC-A and each system component (PC, target system, etc.), start up and shut
down the system using the following procedure.
3.4.1 Power-on procedure
Make sure that the IE-V850E-MC-A is correctly connected to the PC before powering on.
If the IE-V850E-MC-A is powered on using a procedure other than the following one, the IE-V850E-MC-A or the
target system may be damaged.
(1) Turn on the power switch of the IE-V850E-MC-A.
Set the power switch to “ON” after connecting the power adapter to the power jack of the IE-V850E-MC-A and
the plug to the power outlet.
(2) Turn on the power of the target system.
(3) Start the debugger.
3.4.2 Power-off procedure
(1) Terminate the debugger.
(2) Turn off the power switch of the target system.
(3) Turn off the power switch of the IE-V850E-MC-A.
User’s Manual U14487EJ2V0UM
33
CHAPTER 4 SHIPMENT SETTINGS
Item
Setting
Description
JP2
2
1
34
12
11
After shipment, the jumper is set with 1 and 2
shorted and 7 and 8 shorted.
The setting varies depending on the option board,
so for how to set, refer to the user’s manual of the
option board.
Unless specified in the user’s manual of the option
board, use the jumper with the shipment setting.
User’s Manual U14487EJ2V0UM
APPENDIX A
DIMENSIONS
353
55
132
58.8
99
166
Top View
75
27
56
Side View
Bottom View
(Unit: mm)
User’s Manual U14487EJ2V0UM
35
APPENDIX B REVISION HISTORY
A history of the revisions up to this edition is shown below. “Applied to:” indicates the chapters to which the
revision was applied.
Edition
2nd edition
Contents
Applied to:
• Addition of V850E/MA2, V850E/SV2, and V850E/IA2 as target devices
• Addition of IE-70000-PCI-IF-A as corresponding PC interface board
• Modification of IE-V850E-MC-A shape
Throughout
1.1 Hardware Configuration
• Addition of IE-703166-MC-EM1 and IE-703114-MC-EM1 as option boards
• Addition of SWEX-xxxSD-1 as extension probe
CHAPTER 1 OVERVIEW
1.3 Function Specifications
• Thorough modification
Deletion of 1.4 Hardware Configuration
1.4 System Configuration
• Addition of SWEX-xxxSD-1 as extension probe
• Addition of descriptions about connector configurations
1.6.1 When using IE-V850E-MC-A on a standalone basis for performing
software debugging
• Addition and modification of descriptions
1.6.2 When performing hardware debugging with target system
• Addition and modification of descriptions
2.2 Pod Part Names and Functions
• Thorough modification
CHAPTER 2 PART NAMES
AND FUNCTIONS
3.1.3 Insertion of PC interface board
• Addition and modification of descriptions
CHAPTER 3 CONNECTION
OF COMPONENTS
3.2 Connection to Target System
• Modification of descriptions in (1)
• Figure 3-1 Connection of Connector for Target Connection and
Connector for Emulator Connection divided according to target device
3.3.1 Power adapter connection
• Addition of description to Caution
3.3.4 Additional information
• Addition of description to procedure
3.4.1 Power-on procedure
• Modification of procedure
3.4.2 Power-off procedure
• Modification of procedure
36
Addition of CHAPTER 4 SHIPMENT SETTINGS
CHAPTER 4 SHIPMENT
SETTINGS
Addition of APPENDIX B REVISION HISTORY
APPENDIX B REVISION
HISTORY
User’s Manual U14487EJ2V0UM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement