MAX-Ability 12-10 Armedica Changing Table User Manual Make

MAX-Ability 12-10 Armedica Changing Table User Manual Make
MAX-Ability 12-10
Armedica Changing Table User Manual
Make sure the power cord is plugged into a wall outlet. There should be no obstructions near or
under the table. Apply the wheel brakes before transferring a person on or off of the table.
Adjust the height of the table by pressing the up or down button on the hand or foot control. The
height adjustment provides a proper height for wheelchair transfers and an ergonomic working
height for caregivers.
Raise or lower the safety rails by pulling sharply on the lock release handle. It is recommended
that when the table is occupied both safety rails be in the up position.
To move the table, release the wheel brakes. It is not recommended that the table be used to
transport an occupant. Take care to secure the foot or hand control for transport with the table.
Protect the vinyl with a waterproof cover-pad as needed during changing. The table is not to be
used in a shower.
Clean the vinyl after each use with a soft cloth with soap and water. A hospital grade disinfectant
may be used. Do not use bleach or course cleaning pads. Clean the underside of the table daily
with all-purpose cleaner and a soft cloth.
Preventative maintenance is recommended quarterly. Check the operation of the product; check
all fasteners; check the power cord and up/down control. Lubrication and adjustments should
not be necessary.
For technical support call MAX-Ability: 800-577-1555.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement