advertisement
Radius
Reduction
Screw
Plus+ Minus-
Arc Adjustment
SCALE 2:1
Pull-up
Socket
Arc Adjustment:
(All CSP-050 adjustable heads are PRESET to approximately 40°)
1. Rotate the nozzle turret counterclockwise to the left stop.
2. Now, rotate the nozzle turret clockwise to the right stop. This is the fixed side of the arc. The nozzle turret must be held in this position for all arc adjustments.
To increase arc:
1. Insert the key end of the wrench into the adjustment socket on top of the sprinkler.
2. While holding the nozzle turret at the right stop, turn the wrench clockwise.
3. Wrench will stop turning when adjusted to the maximum arc (360°). Do not go past this stop.
4. Adjust to any arc between 40°–360°.
To decrease arc:
1. Insert the key end of the wrench into the adjustment socket.
2. While holding the nozzle turret at the right stop, turn the wrench counterclockwise.
CSP-050
Gear Driven Sprinklers
3. Wrench will stop turning when adjusted to the minimum arc (40°). Do not go past this stop.
4. Adjust to any arc between 40°–360°.
Radius Adjustment:
To decrease radius:
1. Turn nozzle-retainer/range-adjustment screw clockwise using hex end of tool or slot screwdriver. This can reduce radius up to 25%.
2. If an even smaller radius is desired, install a smaller nozzle. This will affect precipitation rate.
To increase radius:
1. Turn nozzle-retainer/range-adjustment screw counterclockwise using hex end of tool or slot screwdriver.
2. If larger radius is desired, install larger nozzle.
This will affect precipitation rate.
Precipitation Rate Adjustment:
To increase precipitation:
1. Remove existing nozzle.
2. Replace with larger size.
3. Adjust radius.
To decrease precipitation:
1. Remove existing nozzle.
2. Replace with smaller size.
3. Adjust radius.
Note: Undamaged nozzles are reusable.
FLUIDRA ESPANA, S.A.U. www.fluidra.es
P/N 700974 INT-986 12/12
CSP-050
Gear Driven Sprinklers
Nozzle Installation:
1. Insert the plastic key end of the wrench into the lifting socket of the sprinkler and turn 90°. Pull the riser up to gain access to the nozzle socket.
2. Using the hex key of the wrench, turn the radius adjustment screw counterclockwise to be sure it is not blocking the nozzle socket opening. If a nozzle is already installed, it can be removed by backing out the adjustment screw and turning on the water, or by prying outward under the nozzle.
3. Slip the desired nozzle into the nozzle socket.
Note that the socket is angled up 25° so that the nozzle range screw threads directly down.
Then tighten the nozzle range screw. The arrow on the rubber cover will always indicate the location of the nozzle and direction of the water flow when the sprinkler is retracted.
CSP-050 Nozzle Performance Data
Data represented test results in zero wind. Adjust for local conditions. Radius may be reduced up to 25% with adjustment screw (this may alter the uniformity of spray pattern).
Optimum performance is shown in bold type.
Removing Filter Screen for Cleaning
Proper Installation
Height
CSP-050 Nozzle Performance Data – Metric
Pressure Radius
Nozzle Bars kPa m
.75
1.0
1.5
2. 0
2.5
3.0
4.0
5.0
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
172
200
248
303
352
379
172
200
248
303
352
379
172
200
248
303
352
379
172
200
248
303
352
379
172
200
248
303
352
379
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
1.7
2.0
2.5
3.0
3.5
3.8
8. 8
9. 1
9.1
9. 4
9. 4
9. 8
9. 8
10.1
10.1
10.4
10.4
10.7
7. 0
7. 3
7.3
7. 6
7. 6
7. 9
7. 9
8. 2
8.2
8. 5
8. 5
8. 8
10.7
11. 0
11.0
11. 3
11. 3
11. 6
172
200
248
303
352
379
172
200
248
303
352
379
172
200
248
303
352
379 m 3
Flow
/hr l/min
4. 3
4. 6
4.9
5. 2
5. 2
5.5
0.13
0.14
0.16
0.18
0.19
0.20
5. 2
5. 5
5.5
5. 8
5. 8
6. 1
6. 1
6. 4
6.4
6. 7
6. 7
7. 0
0.18
0.19
0.21
0.23
0.24
0.25
0.27
0.29
0.32
0.36
0.39
0.40
Precip mm/hr
17
16
18
17
18
18
13
13
15
16
18
17
18
18
18
18
19
18
15
14
16
16
17
17
14
14
16
17
18
18
13
13
14
14
15
14
14
14
13
13
14
13
15
14
16
16
17
16
8. 5
9. 3
10.6
12.0
13.1
13.7
13.3
13.8
14.8
15.7
16.3
16.7
5. 6
6. 2
7.1
8. 0
8. 8
9. 3
7. 6
8. 1
9.0
9. 8
10.5
10.9
17.0
17.6
18.5
19.4
20.1
20.5
0.51
0.56
0.64
0.72
0.78
0.82
0.80
0.83
0.89
0.94
0.98
1.00
0.34
0.37
0.42
0.48
0.53
0.56
0.46
0.49
0.54
0.59
0.63
0.65
1.02
1.06
1.11
1.17
1.21
1.23
2. 2
2. 4
2.7
3. 0
3. 2
3. 4
3. 0
3. 2
3.5
3. 8
4. 1
4. 2
4. 5
4. 8
5.4
6. 0
6. 4
6. 7
Note: All precipitation rates calculated for 180 degree operation.
For the precipitation rate of a 360 degree sprinkler , divide by 2.
19
19
20
20
21
20
15
15
18
19
20
20
21
20
21
21
22
21
17
17
18
19
20
19
16
16
18
19
21
20
15
15
16
16
17
16
17
16
15
15
17
15
17
16
18
18
20
19
CSp-075 Sprinklers
CSp-075 INSTALLATION:
The CSP-075 pop-up sprinkler should be installed at finished grade as shown in the illustration (Fig. 1).
Arc Adjustments:
Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation.
1. Using the palm of your hand, rotate the nozzle turret counterclockwise to the left stop to complete any interrupted rotation cycle (Fig. 2).
2. Rotate the nozzle turret clockwise to the right stop. This is the fixed side of the arc.
The nozzle turret must be held in this position for arc adjustments. The right stop does not change.
To Increase the Arc:
1. Insert the plastic key end of the wrench into the adjustment socket (Fig. 3 & 4).
SCALE 2:1
Fig. 3
2. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360˚ turn of the wrench will increase the arc 90˚.
3. Adjust to any arc between 50˚ and 360˚ (Fig. 5).
4. The wrench will stop turning, or there will be a ratcheting noise, when the maximum arc of 360˚ (full circle) has been reached.
5. When set to 360, the sprinkler will rotate continually counterclockwise.
To Decrease the Arc:
1. Insert the plastic key end of the wrench into the adjustment socket (Fig. 3 & 4).
2. While holding the nozzle turret at the right stop, turn the wrench counterclockwise. Each full 360˚ turn of the wrench will decrease the arc 90˚.
3. Adjust to any arc between 50˚ and 360˚ (Fig. 5).
4. The wrench will stop turning, or there will be a ratcheting noise, when the minimum arc of 50˚ has been reached.
50 °
Fig. 1
Fig. 1
Fig. 2
Fig. 2
ALIGNING THE RIGHT (FIXED) SIDE OF ARC
If the right side of the arc is not properly aligned, the results may be a wet walkway or a dry turf area. The right side arc can easily be realigned. One way to realign the right stop is to turn the whole sprinkler body assembly and the fitting below it, left or right to the desired position. This may require temporary removal of the soil around the sprinkler to allow you to grip the sprinkler housing.
Another way to reset the right arc is to unscrew the body cap counterclockwise and remove the internal assembly from the body. Once removed, rotate the nozzle turret to the right stop, screw the internal assembly back into the body with the nozzle aligned to the right side of the area you want irrigated (Fig. 9).
At this point you have realigned the right arc stop, and you can adjust the left arc to an appropriate setting.
Note: It is not necessary to dig up and remove the whole sprinkler to realign the right arc.
Fig. 9
360 °
Fig. 5
Fig. 5
NON-REvERSING 360
This CSP-075 sprinkler is designed as a part- and full-circle in one model. When the sprinkler is adjusted to the full-circle position, the sprinkler will rotate in a continuous counterclockwise direction. This saves everyone from stocking additional full-circle only models while efficiently irrigating the landscapes.
NON-STRIppAbLE bACkDRIvE
This CSP-075 sprinkler is designed with an internal device that prevents damage to the internal gear drive if it should be turned by vandals. This important feature works when the nozzle turret is turning in either direction. This makes the sprinkler very durable in all applications.
AUTO ARC RETURN
This CSP-075 sprinkler is designed with an internal device that re-aligns the arc if it is turned by vandals. This important feature works when the nozzle turret is turning in either direction.
When forced outside of the originally set arc, the sprinkler takes the shortest path back to the pattern without going completely around. This saves the non-irrigated areas from getting wet!
Always a good thing!
a uto
-retu rn
if fo rced
d esire d se t a rc
Increase Arc Decrease Arc
Note: It is not necessary to disassemble the sprinkler to make adjustments.
Fig. 4
Fig. 4
FLUIDRA ESpANA, S.A.U. www.fluidra.es
P/N 700054 INT-987 12/12
RADIUS / DISTANCE
OF THROW
CSp-075 bLUE NOzzLES p/N 782900
Insert the steel hex end of the wrench into the radius adjustment screw (Fig. 6).
Turn the screw clockwise
(into the stream of water) to decrease the radius, or counterclockwise to increase the radius.
Radius can be reduced up to 25%.
CSP-075 Blue Standard Nozzle pRECIpITATION RATE
ADJUSTMENT
If you have excessively wet or dry areas, you can change the nozzle in the sprinkler to increase or decrease the precipitation rate.
For dry areas, install a larger nozzle. For wet areas, install a smaller nozzle.
NOzzLE INSTALLATION
(Fig. 8).
Plastic Key End
Steel Hex End
"ears" with a pair of needle-nosed pliers.
Fig. 6
2. Using the hex key of the wrench, turn the radius adjustment screw (Fig. 6) counterclockwise to be sure it is not blocking the installed, it can be removed by backing out the adjustment screw and turning on the water, or by pulling outward on the nozzle
The "ears" should be adjusted so that the nozzle range screw threads directly down
Fig. 6
1. Insert the plastic key end of the wrench into the lifting socket of the sprinkler and turn 90˚. Pull the riser up to gain access to the nozzle socket nozzle socket opening. If a nozzle is already
3. Slip the desired nozzle into the nozzle socket
(Fig. 7). Note that the socket is angled up 25˚.
Performance Data P/N 782900
Nozzle
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
Pressure
PSI
55
65
25
35
65
25
35
45
25
35
45
55
35
45
55
65
45
55
65
25
55
65
25
35
65
25
35
45
25
35
45
55
45
55
65
25
CSP-075 Blue Standard Nozzle
Performance Data – Metric
Pressure
Nozzle Bars
55 kPa
Radius ft.
Flow
GPM
4.8
3.7
4.5
5.0
5.7
6.2
4.3
5.6
2.7
3.0
3.4
3.7
3.0
3.5
4.0
4.5
6.0
6.7
7.3
6.0
7.0
8.0
9.0
9.8
2.5
2.6
2.9
2.2
2.1
2.3
1.7
2.1
1.2
1.4
1.5
1.8
1.9
1.4
1.7
2.0
42
42
38
40
41
37
39
42
37
39
40
41
36
38
39
39
35
35
35
35
34
32
33
35
32
33
33
34
29
31
31
32
Radius m
41
44
46
46
43
44
44
37 m 3
Flow
/hr l/min
Nozzle
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
the sprinkler is retracted.
35
45
55
65
25
35
45
45
55
65
25
55
65
25
35
35
45
55
65
65
25
35
45
25
35
45
55
35
45
55
65
45
55
65
25
55
65
25
35
31
31
32
42
42
38
40
41
37
39
42
37
39
40
41
36
38
39
39
35
35
35
35
34
32
33
35
32
33
33
34
43
44
44
Fig. 8
44
46
46
1.4
1.5
1.8
1.9
1.4
1.7
2.0
4.8
3.7
4.5
5.0
5.7
6.2
4.3
5.6
2.7
3.0
3.4
3.7
3.0
3.5
4.0
4.5
6.0
6.7
7.3
6.0
7.0
8.0
9.0
9.8
2.5
2.6
2.9
2.2
2.1
2.3
1.7
2.1
0.35
0.43
0.30
0.33
0.39
0.41
0.46
0.35
0.27
0.28
0.30
0.34
0.36
0.25
0.30
0.33
Fig. 7
0.40
Fig. 7
0.47
Model
0.42
0.44
0.48
0.52
Nozzle
No.
CSP-075
Blue
0.55
0.52
0.57
0.55
0.62
0.68
0.57
0.67
1.5
2.0
2.5
3.0
4.0
5.0
CSP-075
Low
Angle
0.62
0.67
0.73
0.84
0.80
0.80
0.82
0.89
6.0
8.0
2.0LA
2.5LA
3.5LA
4.5LA
Note: All precipitation rates calculated for 180 degree operation.
For the precipitation rate for a 360 degree sprinkler, divide by 2.
0.40
0.50
0.35
0.38
0.45
0.47
0.53
0.40
0.32
0.32
0.35
0.39
0.41
0.29
0.35
0.38
0.46
0.46
0.50
0.54
0.49
0.51
0.56
0.60
1.5
2.0
2.5
3.0
Pressure
Bar
45
0.66
45
3.0
3.0
3.0
3.0
300
300
300
300
45
45
0.78
0.72
0.77
0.84
0.97
0.93
0.92
0.95
1.03
3.0
3.0
3.0
3.0
3.0
300
3.0
300
3.0
3.0
5.0
300
300
6.0
8.0
Precip in/hr
CSP-075 Low Angle Nozzle
2.5
3.0
3.5
4.0
2.0
LA
2.5
LA
3.5
LA
4.5
LA
2.0
2.5
3.0
3.5
13
4.0
4.5
25
25
25
25
3.0
3.5
4.0
4.5
25
25
25
25
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
200
250
300
200
250
300
350
30
40
50
60
400
450
30
40
50
60
250
300
350
200
250
300
350
400
450
400
450
30
40
50
60
30
40
50
60
200
250
300
350
400
450
200
250
300
350
400
450
200
250
300
350
400
450
11.6
11.9
12.2
Feet Meters Feet Meters
8'
8'
9'
10'
11'
11'
12'
13'
5'
4'
4'
4'
9.1
Performance Data
350
400
450
9.8
9.8
9.4
10.1
10.1
10.4
10.7
11.0
11.6
11.9
11.9
12.5
12.5
11.6
11.9
12.8
12.8
12.8
11.9
12.2
13.4
13.4
Radius
10.4
10.4
10.4
10.4
10.7
10.7
10.7
10.7
10.7
11.9
12.8
13.1
13.1
33
35
29
32
35
37 ft.
0.29
0.32
0.35
0.38
25
27
0.41
0.43
28
30
0.35
0.39
0.43
0.47
27
30
0.50
0.53
29
32
35
37
2.4
2.4
2.7
3.0
3.4
3.4
3.7
4.0
1.5
1.2
1.2
1.2
0.43
0.48
0.54
0.58
0.62
0.66
0.54
0.61
0.68
0.74
0.79
0.84
0.73
0.81
0.90
0.97
1.04
1.10
0.91
1.02
1.14
1.24
1.32
1.41
23'
23'
26'
28'
30'
30'
32'
32'
1.09
1.22
22'
22'
1.36
1.47
22'
22'
1.57
1.67
4.8
5.4
5.9
6.4
6.8
7.2
1.6
1.9
2.1
2.3
5.8
6.5
7.2
7.8
2.1
8.3
8.8
2.8
3.0
2.8
3.1
10.4
11.1
9.1
10.2
11.4
12.3
13.2
14.0
12.2
13.6
15.0
17.3
18.3
15.2
17.1
19.0
20.6
22.1
23.4
26.2
27.9
7.0
7.0
7.9
8.5
9.1
9.1
9.8
9.8
18.2
20.4
6.7
6.7
22.7
24.5
6.7
6.7
13
14
14
15
14
15
16
17
15
16
16
17
18
19
11
12
12
13
10
10
10
10
11
12
8
9
7
8 0.52
0.49
9
10
0.55
0.53
8
8
9
10
0.49
0.47
11
12
0.64
0.58
0.55
0.53
0.78
0.73
0.69
0.66
7
8
7
7
9
10 0.49
0.50
8
8
9
Precip in/hr
10
11
8
9
9
10
11
11
0.57
0.58
0.60
0.57
0.64
0.62
0.57
0.54
9
10
11
12
13
13
11
12
12
12
13
14
0.74
0.67
0.64
0.62
0.90
0.85
0.80
0.76
13
13
14
15
15
16
16
17
16
17
19
20
18
19
18
20
20
21
2.0
2.5
3.0
3.5
4.0
4.5
200
250
300
350
400
450
11.9
12.5
13.4
13.7
14.0
14.0
1.46
1.63
1.81
1.95
2.09
2.22
24.3
27.2
30.2
32.6
34.8
36.9
21
21
20
21
21
23
24
24
23
24
25
26
0.63
0.60
0.66
0.63
0.72
0.78
0.66
0.78
0.46
0.46
0.50
0.54
0.49
0.51
0.56
0.60
0.72
0.77
0.84
0.97
0.93
0.92
0.95
1.03
0.40
0.50
0.35
0.38
0.45
0.47
0.53
0.40
0.32
0.32
0.35
0.39
0.41
0.29
0.35
0.38
0.55
0.52
0.57
0.55
0.62
0.68
0.57
0.67
0.40
0.40
0.43
0.47
0.42
0.44
0.48
0.52
0.35
0.43
0.30
0.33
0.39
0.41
0.46
0.35
0.27
0.28
0.30
0.34
0.36
0.25
0.30
0.33
0.62
0.67
0.73
0.84
0.80
0.80
0.82
Precip mm/hr
Note: All precipitation rates calculated for 180 degree operation.
For the precipitation rate for a 360 degree sprinkler, divide by 2.
CSp-075 Sprinklers
METRIC
CSP-075 Blue Standard Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
1.5
2.0
2.5
3.0
3.5
4.0
4.5
200
250
300
350
400
450
Radius m
9.1
9.4
9.8
9.8
9.8
9.4
m 3
Flow
/hr l/min
0.29
0.32
0.35
0.38
0.41
0.43
4.8
5.4
5.9
6.4
6.8
7.2
2.0
2.5
3.0
4.0
5.0
2.0
Nozzle
2.5
LA
3.5
LA
4.5
LA
3.0
3.5
4.0
4.5
10.1
10.1
10.4
10.4
10.4
10.4
0.35
0.39
0.43
0.47
CSP-075 Low Angle Nozzle
Performance Data
2.0
LA
2.0
2.5
3.0
3.5
4.5
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
4.0
4.5
200
250
300
350
0.53
50
200
30
40
50
400
450 30
200
250
300
350
30
400
450 50
60
250
300
350
400
450
Pressure
PSI
30
400
450
10.4
10.7
10.7
10.7
10.7
10.7
10.7
11.0
11.6
11.9
11.9
11.9
11.6
11.9
12.2
12.2
ft.
25
27
28
30
27
30
33
35
12.5
12.5
29
32
11.6
11.9
12.8
12.8
12.8
12.8
35
37
29
32
35
37
0.54
0.61
0.68
0.74
0.79
0.84
0.43
0.48
0.54
0.58
0.62
0.66
0.73
0.81
0.90
0.97
1.04
1.10
0.91
1.02
1.14
1.24
1.32
1.41
Flow
GPM
1.6
10.4
11.1
2.1
9.1
2.1
2.5
12.3
2.8
13.2
14.0
2.8
3.1
3.5
3.8
12.2
13.6
15.0
16.2
3.4
17.3
18.3
4.4
4.7
17.1
19.0
20.6
22.1
23.4
5.8
6.5
7.2
7.8
8.3
8.8
6.0
8.0
2.0
2.5
3.0
3.5
4.0
4.5
2.0
2.5
3.0
3.5
4.0
4.5
200
250
300
350
400
450
200
250
300
350
400
450
11.9
12.5
13.4
13.7
14.0
14.0
11.9
12.2
13.1
13.1
13.4
13.4
1.46
1.63
1.81
1.95
2.09
2.22
1.09
1.22
1.36
1.47
1.57
1.67
24.3
27.2
30.2
32.6
34.8
36.9
18.2
20.4
22.7
24.5
26.2
27.9
Precip mm/hr
8
9
7
8
9
10
7
8
7
7
9
10
21
21
20
21
21
23
15
16
16
17
18
19
10
0.55
0.53
10
11
12
11
12
12
13
0.64
0.58
0.55
0.53
0.78
13
14 0.69
0.66
15
14
15
16
17
8
8
Precip in/hr
0.49
0.50
0.52
0.49
9
10
11
12
13
13
0.57
0.58
0.60
0.57
11
12
12
12
13
14
0.64
0.62
0.57
0.54
13
13
14
15
15
16
16
17
16
17
19
20
0.74
0.67
0.64
0.62
0.90
0.85
0.80
0.76
24
24
23
24
25
26
18
19
18
20
20
21
8
9
9
10
11
11
9
9
8
8
10
11
Performance Data – Metric
Pressure
Nozzle Bars kPa
Radius m m 3
Flow
/hr l/min
CSP-075 18' Short Radius Nozzle
2.0
LA
.50
SR
2.5
LA
2.0
SR
LA
4.5
LA
SR
1.7
2.0
2.5
3.0
3.5
4.0
4.5
30
40
50
60
CSP-075 25' Short Radius Nozzle
Performance Data
Nozzle
3.0
3.5
30
4.5
50
2.0
2.5
3.0
3.5
4.0
30
40
50
60
303
352
400
448
1.7
Pressure
PSI
3.0
3.5
4.0
30
40
50
60
172
200
248
303
352
400
448
172
200
248
303
352
400
448
172
200
248
303
352
400
448
8.2
8.5
17
17
8.8
9.1
18
19
8.2
17
17
18
19
17
17
18
19
8.8
9.4
10.1
10.4
8.5
8.8
9.1
10.1
10.7
11.0
8.2
Radius ft.
10.1
10.7
11.0
0.33
0.36
0.40
0.45
0.48
0.52
0.36
0.55
0.50
0.44
0.47
0.78
0.90
0.64
0.68
0.58
0.62
0.68
0.75
0.80
0.85
0.89
1.4
1.7
2.0
2.2
0.71
Flow
GPM
0.93
1.00
1.06
5.6
6.0
6.7
7.4
8.0
8.6
9.1
7.3
7.9
8.8
9.8
10.6
11.3
12.0
9.7
10.3
11.4
12.5
13.3
14.1
14.8
11.8
12.7
14.1
15.5
16.6
17.6
18.6
1.5
SR
3.0
SR
30
40
50
60
30
40
50
60
23
24
25
26
23
24
25
26
1.1
1.3
1.5
1.6
2.5
2.7
3.0
3.1
Precip mm/hr
0.40
0.43
0.46
0.46
0.91
0.90
0.92
0.88
0.93
1.13
1.19
1.17
16
16
16
15
14
14
14
13
13
13
0.30
14
0.52
0.60
13
13
12
12
13
14
14
15
Precip in/hr
15
15
15
16
16
16
15
0.33
0.34
15
15
0.60
0.69
0.69
0.68
18
18
19
17
16
16
16
1.08
1.31
1.37
1.35
20
0.21
0.23
21 24
Precip in/hr
21
20
20
0.24
0.26
Note: All precipitation rates calculated for 180 degree operation.
For the precipitation rate for a 360 degree sprinkler, divide by 2.
0.46
0.50
0.53
0.53
1.05
1.04
1.07
1.02
CSP-075 Low Angle Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
Radius m m 3
Flow
/hr l/min
2.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
7.3
7.6
7.9
8.2
8.5
8.8
9.1
0.33
0.36
0.40
0.45
0.48
0.52
0.55
5.6
6.0
6.7
7.4
8.0
8.6
9.1
Precip mm/hr
12
12
13
13
13
13
13
2.5
LA
Nozzle
1.7
2.0
CSP-075 18' Short Radius Nozzle
3.5
Pressure
PSI
172
200
248
303
352
Radius
448 ft.
10.7
7.9
8.2
8.8
9.4
10.1
10.4
0.44
0.47
0.53
0.59
Performance Data P/N 466100
Flow
GPM
.50
3.5
LA
SR
4.5
LA
1.7
2.0
2.5
3.0
30
40
50
60
30
40
50
3.5
4.0
4.5
50
60
2.0
2.5
3.0
172
200
248
303
352
400
448
172
200
248
303
352
400
448
17
17
18
19
8.5
8.8
9.1
10.1
10.7
11.0
17
17
18
19
17
17
18
11.3
19 8.2
8.8
9.1
10.1
10.7
11.0
11.3
0.58
0.62
0.68
0.75
1.0
1.1
0.76
1.7
2.0
1.00
1.06
1.12
7.3
7.9
8.8
9.8
10.6
11.3
12.0
9.7
10.3
11.4
12.5
13.3
14.1
0.24
0.29
0.30
0.30
14
14
16
16
16
15
14.8
0.52
0.60
0.59
14
11.8
12.7
14.1
15.5
16.6
17.6
18.6
0.59
0.93
1.13
1.19
1.17
21
19
20
18
18
18
18
14
14
14
13
13
13
13 15
16
16
16
15
15
15
18
18
19
17
0.28
0.33
0.34
0.35
0.69
0.68
23
1.31
1.37
20
20
20
14
14
15
15
15
15
15
CSP-075 25' Short Radius Nozzle
Performance Data
Nozzle
.75
SR
1.5
SR
3.0
SR
Pressure
PSI
30
40
50
60
30
40
50
60
30
40
50
60
23
24
25
26
23
24
25
26
Radius ft.
23
24
25
26
1.1
1.3
1.5
1.6
2.5
2.7
3.0
3.1
Flow
GPM
0.58
0.68
0.75
0.83
Precip in/hr
0.21
0.23
0.23
0.24
0.40
0.43
0.46
0.46
0.91
0.90
0.92
0.88
.75
SR
1.5
SR
3.0
SR
1.7
2.0
2.5
3.0
3.5
4.0
4.5
1.7
2.0
2.5
3.0
3.5
4.0
4.5
1.7
2.0
2.5
3.0
3.5
4.0
4.5
Note: All precipitation rates calculated for 180 degree operation.
CSP-075 5.5 m Short Radius Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
Radius m m 3
Flow
/hr l/min
CSP-075 High Flow Standard Nozzle
.50
SR
10
Pressure
3.5
4.0
4.5
1.7
2.0
2.5
3.0
3.5
4.0
4.5
PSI
40
50
60
70
40
50
60
70
303
352
400
448
172
200
248
303
352
400
448
Radius ft.
42
5.5
43
45
43
44
45
47
5.5
5.5
47
4.9
5.2
5.2
5.2
5.5
5.5
5.5
0.10
0.12
0.13
0.14
10.5
0.17
10.9
12.3
13.6
14.8
0.26
1.3
1.5
1.7
1.9
2.1
2.3
2.7
2.9
3.2
3.6
3.8
4.1
4.3
Precip mm/hr
0.92
0.99
1.00
0.99
1.13
1.22
1.29
1.29
6
6
7
Precip in/hr
8
8
9
14
13
14
16
15
16
17
8
9
7
7
9
10
1.14
16
15
17
18
18
19
20
2.0
SR
Nozzle
6.0
LA
8.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
PSI
30
40
50
172
352
400
448
CSP-075 7.6 m Short Radius Nozzle
40
50
Pressure
Nozzle Bars 70 kPa
4.9
5.2
5.2
5.2
Radius ft.
5.5
5.5
5.5
31
35
37
39
Performance Data – Metric
Radius
41 m
0.28
0.31
0.36
0.41
0.45
0.49
0.53
4.2
5.0
5.8
6.3
4.7
5.2
6.0
6.9
7.6
8.2
8.9
0.84
0.79
0.82
0.80
24
23
27
31
Precip in/hr
35
35
38
41
0.97
27
27
31
35
0.91
0.94
0.92
m 3
6.7
7.7
8.5
9.2
Flow
/hr l/min
0.94
0.97
0.97
1.05
1.09
1.13
Precip mm/hr
1.22
172
200
248
303
352
400
448
172
200
248
303
352
400
448
172
200
248
303
352
400
448
6.7
7.0
7.0
7.3
7.6
7.6
7.6
6.7
7.0
7.0
7.3
7.6
7.6
7.6
6.7
7.0
7.0
7.3
7.6
7.6
7.6
0.23
0.25
0.28
0.31
0.34
0.36
0.39
0.12
0.13
0.15
0.16
0.17
0.19
0.20
0.53
0.56
0.60
0.64
0.67
0.70
0.73
3.8
4.1
4.6
5.2
5.6
6.0
6.4
2.0
2.2
2.4
2.7
2.9
3.1
3.3
8.9
9.3
10.0
10.7
11.2
11.7
12.1
10
10
11
12
12
12
13
6
6
7
6
6
5
5
24
23
24
24
23
24
25
12
12
13
13
13
14
15
7
7
8
7
7
6
6
27
26
28
28
27
28
29
Note: All precipitation rates calculated for 180 degree operation.
For the precipitation rate for a 360 degree sprinkler, divide by 2.
0.24
0.26
0.27
0.27
0.46
0.50
0.53
0.53
1.05
1.04
1.07
1.02
CSP-075 5.5 m Short Radius Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
Radius m m 3
Flow
/hr l/min
.50
SR
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
4.9
5.2
5.2
5.2
5.5
5.5
5.5
0.07
0.08
0.09
0.10
0.12
0.13
0.14
1.2
1.3
1.5
1.7
1.9
2.1
2.3
Precip mm/hr
8
8
9
7
8
6
6
1.0
SR
1.7
2.0
2.5
3.0
172
200
248
303
4.9
5.2
5.2
5.2
0.16
0.17
CSP-075 High Flow Standard Nozzle
Performance Data P/N 444800
Nozzle
Pressure
PSI
352
400
448
Radius ft.
5.5
5.5
Flow
GPM
2.7
2.9
3.2
3.6
3.8
4.1
4.3
10
SR
13
1.7
2.0
2.5
3.0
40
50
60
70
60
70
172
200
248
303
352
400
448
43
44
45
47
42
43
45
47
4.9
5.2
5.2
5.2
5.5
5.5
5.5
0.28
0.31
0.36
0.41
13.6
14.8
4.7
5.2
6.0
6.9
0.92
0.99
1.00
0.99
14
13
14
16
15
16
17
1.29
1.29
24
23
27
31
30
33
35
1.06
1.14
1.15
1.15
1.31
1.41
1.49
1.49
27
27
31
35
35
38
41
16
15
17
18
18
19
20
CSP-075 7.6 m Short Radius Nozzle
Performance Data – Metric
Performance Data
Nozzle
Nozzle
6.0
LA
8.0
LA
1.5
SR
Pressure
PSI
2.0
40
50
3.5
4.0
50
60
70
2.5
3.0
3.5
4.0
4.5
Radius kPa
Radius
172
200
248
303
352
400
448
172
200
248
303
352
400
448 ft.
31
35
37
39
37
39
41
41 m
6.7
7.0
7.0
7.3
7.6
7.6
7.6
6.7
7.0
7.0
7.3
7.6
7.6
7.6
7.7
8.5
9.2
0.28
0.31
0.34
0.36
0.39
m 3
Flow
GPM
Flow
/hr l/min
0.12
4.2
5.0
0.16
5.8
0.17
0.19
2.0
2.2
2.4
2.7
2.9
3.1
0.84
0.79
0.82
0.80
Precip mm/hr
Precip in/hr
5
5
6
6
6
6
7
0.97
0.97
1.05
4.6
5.2
5.6
6.0
6.4
10
10
11
12
12
12
13
0.97
0.91
0.94
0.92
7
7
7
7
6
6
1.09
1.13
1.12
8
1.22
12
12
13
13
13
14
15
27
26
28
28
27
28
29
3.0
SR
1.7
2.0
2.5
3.0
3.5
352 7.6
CSP-075 High Flow Standard Nozzle
4.5
172
200
248
303
6.7
7.0
7.0
7.3
Performance Data – Metric
0.53
0.56
0.60
0.64
0.67
0.70
0.73
8.9
9.3
10.0
10.7
11.2
11.7
12.1
24
23
24
24
23
24
25
Note:
Nozzle
Pressure
Bars kPa
Radius m m
Flow
/hr l/min
Precip mm/hr
10
13
172
200
248
303
352
400
448
172
200
248
303
352
400
448
1.7
2.0
2.5
3.0
3.5
4.0
4.5
1.7
2.0
2.5
3.0
3.5
4.0
4.5
11.0
12.2
12.8
13.1
13.4
13.7
14.0
10.7
11.9
12.5
12.8
13.1
13.7
14.0
1.91
2.08
2.34
2.61
2.83
3.03
3.23
1.48
1.60
1.80
2.01
2.18
2.34
2.49
32
28
29
30
31
32
33
26
23
23
25
25
25
25
31.9
34.6
38.9
43.4
47.1
50.5
53.8
24.6
26.7
30.0
33.5
36.3
39.0
41.5
37
32
33
35
36
37
38
30
26
27
28
29
29
29
CSP-075 High Flow Low Angle Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
6.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
Radius m
9.1
9.4
10.1
10.7
11.3
11.6
11.9
m 3
Flow
/hr l/min
0.86
0.94
1.07
1.20
1.31
1.42
1.52
14.3
15.6
17.8
20.0
21.9
23.6
25.3
Precip mm/hr
21
21
21
21
21
21
21
24
24
24
24
24
24
25
8.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
10.1
10.7
11.3
11.6
11.9
12.5
12.5
1.17
1.28
1.44
1.61
1.76
1.89
2.01
19.5
21.3
24.0
26.9
29.3
31.5
33.6
23
22
23
24
25
24
26
27
26
26
28
29
28
30
9
10
10
8
9
7
7
CSP-075 High Flow Standard Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
Radius m m 3
Flow
/hr l/min
10
13
172
200
248
303
352
400
448
172
200
248
303
352
400
448
1.7
2.0
2.5
3.0
3.5
4.0
4.5
1.7
2.0
2.5
3.0
3.5
4.0
4.5
11.0
12.2
12.8
13.1
13.4
13.7
14.0
10.7
11.9
12.5
12.8
13.1
13.7
14.0
1.91
2.08
2.34
2.61
2.83
3.03
3.23
1.48
1.60
1.80
2.01
2.18
2.34
2.49
31.9
34.6
38.9
43.4
47.1
50.5
53.8
24.6
26.7
30.0
33.5
36.3
39.0
41.5
Precip mm/hr
32
28
29
30
31
32
33
26
23
23
25
25
25
25
37
32
33
35
36
37
38
30
26
27
28
29
29
29
CSP-075 High Flow Low Angle Nozzle
Performance Data – Metric
Pressure
Nozzle Bars kPa
6.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
Radius m
9.1
9.4
10.1
10.7
11.3
11.6
11.9
m 3
Flow
/hr l/min
0.86
0.94
1.07
1.20
1.31
1.42
1.52
14.3
15.6
17.8
20.0
21.9
23.6
25.3
Precip mm/hr
21
21
21
21
21
21
21
24
24
24
24
24
24
25
8.0
LA
1.7
2.0
2.5
3.0
3.5
4.0
4.5
172
200
248
303
352
400
448
10.1
10.7
11.3
11.6
11.9
12.5
12.5
1.17
1.28
1.44
1.61
1.76
1.89
2.01
19.5
21.3
24.0
26.9
29.3
31.5
33.6
23
22
23
24
25
24
26
27
26
26
28
29
28
30
advertisement
Related manuals
advertisement