Displays2go WMGNSP4518 3-Tiered Literature Wall Rack Assembly Instructions
Advertisement
Advertisement
WMWV4518 - WALL MOUNTING CURVED PROFILE
1. Mark and drill holes in the wall at the specified distances as shown below. Insert wall anchors and attach wall mounting brackets to wall with anchor screws provided.
2. Insert rods at the ends of curved profiles into the wall mount brackets, and tighten the set screws . Make sure all set screws fix in grooves on the rods.
Allen Key
Set Screw
41-
”
1045mm
Wall Mounting Bracket
QYT:4
Curved Profile
19-¼”
489mm
3. Remove the end cap from one end of each wave profile. Insert clamps into the profiles through the grooves.
See IHCLAMP3 instructions for more details.
End Cap
This curved profile is used in the products listed below:
• WMGLH4518
• WMGNSP4518
• WMLH4518
• WMNSP4518
If you are uncertain about the installa�on or have any ques�ons on the product, please contact D2G customer service.
Ver. 03/18

Public link updated
The public link to your chat has been updated.
Advertisement