Foxit Reader 6.1_Manual
Copyright © 2013 Foxit Corporation. All Rights Reserved.
No part of this document can be reproduced, transferred, distributed or stored in any format without the prior
written permission of Foxit.
Anti-Grain Geometry - Version 6.1
Copyright (C) 2002-2005 Maxim Shemanarev (http://www.antigrain.com)
Permission to copy, use, modify, sell and distribute this software is granted provided this copyright notice
appears in all copies. This software is provided "as is" without express or implied warranty, and with no claim as
to its suitability for any purpose.
II
Contents
Contents ......................................................................................................... III
Chapter 1 – Introduction ......................................................................... 1
Foxit Reader Overview ........................................................................................... 1
Foxit Reader Add-ons ............................................................................................. 1
Foxit Reader Plug-Ins ............................................................................................. 3
Chapter 2 – Getting Started ................................................................... 5
Installing Foxit Reader........................................................................................... 5
Updating Foxit Reader ............................................................................................ 9
Uninstalling Foxit Reader .................................................................................... 10
Toolbar Modes .......................................................................................................... 11
Work Area .................................................................................................................. 15
Setting Preferences & Viewing Properties................................................... 21
About Navigation Pane ......................................................................................... 31
Customizing Shortcut Keys................................................................................. 33
Switching UI Languages ...................................................................................... 33
Chapter 3 – Viewing PDFs ......................................................................35
Opening & Saving & Closing PDFs ................................................................... 35
Viewing Documents ............................................................................................... 38
Finding Text .............................................................................................................. 52
Playing a Movie or a Sound Clip ....................................................................... 54
Working with Asian Languages in PDFs........................................................ 54
Thumbnails Preview in Windows ..................................................................... 55
Chapter 4 – Working on PDFs ...............................................................56
Select & Copy ........................................................................................................... 56
Working with Layers ............................................................................................. 58
Measuring the Objects .......................................................................................... 59
Switching between Basic Tools ........................................................................ 61
Using Rulers & Guides .......................................................................................... 61
Undoing and Redoing ............................................................................................ 63
Sharing Documents................................................................................................ 63
Creating PDFs ........................................................................................................... 70
Signing PDFs ............................................................................................................. 73
Stamping PDFs......................................................................................................... 80
Managing Security.................................................................................................. 85
Chapter 5 – Comments .......................................................................... 106
About the Annotation Tools.............................................................................. 106
Selecting Tools to Add Comments ................................................................. 106
Using the Select Text Tool ................................................................................ 110
Using the Drawing Markup Tools ................................................................... 110
Using the Typewriter Tools .............................................................................. 114
III
Working on Comments ....................................................................................... 119
Chapter 6 – Form...................................................................................... 127
Filling in PDF Forms ............................................................................................. 128
Commenting on Forms ....................................................................................... 130
Importing & Exporting Form Data ................................................................. 130
Chapter 7 – Data Import & Export ................................................... 131
Importing & Exporting Comments Data...................................................... 131
Importing & Exporting Form Data ................................................................. 132
Chapter 8 – Advanced Editing on PDFs .......................................... 136
Creating Bookmarks ............................................................................................ 136
Adding Links ........................................................................................................... 140
Attaching Files ....................................................................................................... 144
Adding Images....................................................................................................... 148
Adding Video & Audio ......................................................................................... 154
Chapter 9 – Printing ................................................................................ 159
How to Print a PDF Document?....................................................................... 159
Printing a Portion of a Page ............................................................................. 159
Printing PDFs in Black and White Color ...................................................... 159
Print Dialog ............................................................................................................. 160
Chapter 10 – Appendices ...................................................................... 164
Keyboard Shortcuts ............................................................................................. 164
Command Lines ..................................................................................................... 167
Contact Us ................................................................................................... 168
IV
Chapter 1 – Introduction
Foxit Reader Overview
Welcome to Foxit Reader-- your right choice to view and print PDF documents!
Foxit offers two versions of Foxit Reader (Desktop and Enterprise). Foxit Reader (Desktop Version)
is a free PDF document viewer and printer. Foxit Reader (Enterprise Version) is developed on the
basis of Foxit Reader (Desktop Version), but it extends the usability and performance of desktop
version. Compared with Foxit Reader (Desktop Version), Foxit Reader (Enterprise Version) covers
more advanced features, such as RMS Protection, GPO Control, XML Control, etc. This User
Manual generally introduces the features and functions of Foxit Reader (Desktop Version), for
more information on Enterprise Version, please refer to the attached “Foxit Enterprise
Deployment and Configuration”.
Foxit Reader (Desktop Version), hereafter referred to as Foxit Reader, is a free PDF document
viewer and printer. It launches quickly and is easy to install. Just unzip the downloaded zip file,
run “Foxit Reader Setup” and then follow the installation guides to complete installation.
In addition to the basic PDF viewing functions, Foxit Reader also includes various advanced
features, such as adding annotations, saving a PDF document as a text file, copying text from the
text viewer and digital signature validation.
Foxit Reader Add-ons
Foxit Reader provides separate add-ons for you to download on demand. These add-ons fall into
critical add-ons and advanced add-ons, which can be updated by the Update Manager, and it can
also be downloaded from our website (http://www.foxitsoftware.com/pdf/reader/addons.php).
The former one is free while the latter provides additional features for a fee.
Critical Add-ons
Critical add-ons are free. They are essential components for proper display and execution. For
example, if you open a PDF document containing Chinese characters, Foxit Reader will ask if you
want to download the Eastern Asian Language Support. If you choose “Cancel”, you can read this
file, but some characters will not be displayed correctly.
Free Critical Add-ons in Foxit Reader
Name
Function Description
Size
Remark
JPEG2000/JBIG
Decoder
This add-on module is for decoding images in
JPEG2000 or JBIG2 formats. If you don't install this
169KB
Download
Free
1
module, images in those formats cannot be
displayed.
Eastern
Language
Support
Asian
This module is used for displaying Eastern Asian
Language in a PDF file. Eastern Asian Language can't
be displayed properly without it.
2.10MB
Download
Free
GDI+ Module
This is a redistributable module from Microsoft
which provides better display quality for graphics.
You can still view the PDF file without this module in
lower graphic quality. Installing this module will not
affect any other applications on your system.
764KB
Download
Free
JavaScript
Support
This add-on is used to execute JavaScript in many
interactive forms. If you don't install this add-on, you
still can fill in such forms, but you wouldn't be able to
perform some automated tasks like field value
verification and recalculation.
1.05MB
Download
Free
NOTE: To manually install a critical add-on, please extract it to the same directory where you
install Foxit Reader.
See also “Updating Foxit Reader”.
Advanced Add-ons
Advanced add-ons have many specific capabilities.
Advanced Add-ons in Foxit Reader
Name
Function Description
Size
Remark
Foxit Toolbar
for Browser
This add-on is a free toolbar for IE or
Firefox that delivers up-to-date Foxit news
and upgrades straight to your Internet
browser, enabling the user to search the
web anytime anywhere, giving easy
access to various useful goodies and
gadgets.
1.01MB
Download
Free
Firefox Plugins
Foxit Firefox Plugin installs a simple Foxit
Reader into the Firefox web browser, this
free add-on allows users to display, view, 1.19MB
edit and print PDF documents in the
browser.
Download
Free
Spell Checker
When you fill out an English form or use
typewriter to insert any English text, this
tool will try to find any spelling errors and
Download
833 KB
2
highlight them with squiggly lines. If you
right click on the misspelled words, you
will see a list of suggested words. Click
here to download the dictionary.
RMS Plug-in
RMS
Plug-in
provides
seamless
integration with Microsoft Windows
Server environment to protect PDF
documents and manage policy templates.
With this plug-in, you can restrict user’s
access to documents to safeguard digital
V1.0:1.41MB
information from unauthorized use. Foxit
Reader (Enterprise Version) provides two
V3.0:1.25MB
versions of RMS Plug-in, i.e. RMS Plug-in
V1.0 for OS Windows XP and later, and
RMS Plug-in V3.0 for OS Windows Vista
SP2 and later. You can change between
the two versions as required easily and
quickly through GPO editing.
Integrated in the
package.
Desktop
Version:
Feature is free, with
watermark
displayed in PDFs.
Enterprise Version:
Free trial for 30
days,
without
watermark
displayed in PDFs.
Tips:
1.
Instructions on installation of .fzip package below
To manually install a critical or an advanced add-on, please run Foxit Reader, and then go to "Help" > "Install
Update" > browse and choose the related downloaded package, and then click the "Open" button. When you're
done, click "Done" to finish the installation.
2.
How to install the dictionary for Foxit Spell Checker?
After you download the dictionary and unzip it, please save the unzipped folder named “lex” to the same
installation folder of Foxit Reader, which could be placed in “C:\Program Files\Foxit Software\Foxit Reader”.
Foxit Reader Plug-Ins
Foxit Reader adds a Plug-in Manger which shows a list of installed plug-ins, including their name,
version, date, description and legal copyright.
To view relevant information about plug-ins, please choose “Help” and click “About Foxit Plug-Ins”
under “Product” ribbon.
3
4
Chapter 2 – Getting Started
This section gives you an overview of Foxit Reader, including installation, upgrading and
uninstallation, as well as work area and toolbar modes.
Installing Foxit Reader
Windows System Requirements
Foxit Reader runs successfully on the following systems. If your computer does not meet these
requirements, you may not be able to use Foxit Reader.
Operating Systems







Microsoft® Windows® XP Home, Professional, or Tablet PC Edition with Service Pack 2 or 3
(32-bit & 64-bit)
Windows Vista® Home Basic, Home Premium, Business, Ultimate, or Enterprise with or
without Service Pack 1 (32-bit & 64-bit)
Windows 7(32-bit & 64-bit)
Windows 8 Full Version
Microsoft Office® 2003 or later version (required for some PDF creation features)
Citrix XenApp® 6
For users utilizing the Active Directory Rights Management Service and SharePoint
integration capability, Windows 7 or Windows Vista with Service Pack2 (SP2) is required.
Recommended Minimum Hardware for Better Performance




1.3 GHz or faster processor
512 MB RAM (Recommended: 1 GB RAM or greater)
1 GB of available hard drive space
1024x768 screen resolution
How to Install?
Please visit Foxit Corporation’s website (http://www.foxitsoftware.com/downloads/) to
download the latest version of Foxit Reader for free.
If you download the “FoxitReader6.1_setup.exe” file to your computer, please do the following:
Double-click the installation file and you will see the Install Wizard pop up. Click Next to
continue.
5
In order to install Foxit Reader on your system, you are required to accept the terms and
conditions of Foxit’s License Agreement. Please read the Agreement carefully and then
check I accept the agreement and click Next to continue. If you cannot accept it, please
click Cancel to exit the installation.
Foxit Reader will be installed under the default path: C:\Program Files \Foxit Software\Foxit
Reader. If you want to change the location, please click Browse and set the installation path.
6
Choose to select standard or custom installation. And you can choose the optional
components.
If you choose custom installation, you will be given a chance to select the additional tasks
you would like to perform while installing Foxit Reader.
7
If you want to set Safe Reading Mode during installation, please check the Enable Safe
Reading Mode.
Check the choices you made just now and click Install.
8
Finally, a message will appear to inform you the successful installation. Click Finish to
complete the installation.
Updating Foxit Reader
Foxit files and add-ons can be updated in several ways. Some updates are available if you open a
PDF document that triggers the updating process. For example, if you open a file that contains
Chinese characters, Foxit Reader will ask if you want to download the Eastern Asian Language
Support. Other updates are available only from the Help menu, where you have to manually
install them. However, all updates can be downloaded directly from Foxit website.
9
Updating from the Help Menu
1. Choose Help > Check for Updates.
2. Select updates from the column on the left, and click Add to move them to the right column.
Only the updates and components appropriate for your product will be listed.
3. Click Install.
Use Foxit Updater
1. Choose File> Preferences > Updater.
2. Check the appropriate option according to your requirements.
 Automatically install updates (only for the patch): the system will automatically download
and replace the original files in the installation folder when there is a new version.
 Automatically download updates, but let me choose when to install them (Default): the
system will automatically download and display a message informing you of the upgrade and
allowing you to choose to upgrade to the new version. This option is checked by default.
 Do not download or install updates automatically: never download or install updates
automatically.
3. Click OK.
Updating From Foxit Website
1.
2.
3.
4.
Click to visit http://www.foxitsoftware.com/pdf/reader/addons.php.
Select and download the add-ons you want to update.
Extract them to the same directory where you install Foxit Reader.
Re-run the Foxit Reader program to implement the update files.
Note: You can save the customization and settings and apply them in the new version after
upgrading.
Uninstalling Foxit Reader
How to Uninstall?
Please do one of the following:
Click Start > Programs > Foxit Reader > Uninstall.
Click Start > Settings > Control Panel > Add or Remove Program and select Foxit Reader to
uninstall.
Double click the file uninstall.exe under Foxit Reader installation directory Drive.
10
Note: A short survey window will pop up when a user uninstalls Foxit Reader, to collect
suggestions for improvement.
Toolbar Modes
Foxit Reader offers two toolbar modes: Classic Toolbar Mode and Ribbon Mode, in order to
provide users with different experience during PDF viewing.
Classic Mode
Classic Mode was commonly applied in earlier versions of Foxit Reader. In Classic Toolbar Mode,
tools are arranged under menus. Users can get tools from corresponding menu by clicking the
menu. It is quite simple and clean, only occupying little space and saving more space for
document viewing.
Fig. 1 Classic Toolbar Mode Overview
Ribbon Mode
Foxit has integrated the collective tools in the ribbon interface and created a new way of working,
namely Ribbon Mode. Ribbon Mode is one of the big improvements you will find in Foxit Reader.
It is developed based on Microsoft Office 2013 (Office 15), to provide users with a familiar and
intuitive user experience. In this mode, tools are arranged by groups and tasks. Below are some
highlights of the new interface.
A
B
C
D
E
F
Fig. 2 User Interface in Ribbon Mode
11
A. Quick Access Toolbar B. Menu C. Ribbon D. Navigation Pane (Bookmark Panel displayed)
E. Status bar F. Document Pane
As shown above, Foxit Reader generally contains three toolbars in Ribbon Mode, i.e. Quick Access
Toolbar, Menu Bar and Ribbon Bar.



Quick Access Bar: shows the basic tools, such as Open, Save, Print, etc. You can add or
replace the tools so as to ensure that the commonly used ones are close at hand.
Menu Bar: shows the major menus of Foxit Reader, being classified as File, Home, Comment,
View, Form, Protect, Share and Help.
Ribbon Bar: categorizes the tools by groups according to the function of the tools.
About Menu Bar
File Menu
File Menu gives you quick access to many of Reader’s most important tasks, including Open,
Create, Save, Save as, Close, Print and Exit. From this menu, you can also view the properties of
Reader, set preferences and access a list of the most recent documents you have been working
on.
Foxit Reader offers a full page view based on Microsoft® Word® 2013 UI for File options , allowing
users to view relevant content on the same page instead of a pop-up window(as shown below).
This new feature is more intuitive and provides users with a familiar user experience.
Fig. 3 File Menu
12
Home Menu
Under the Home Menu are PDF signature tools, View tools, Comment tools, PDF creation tools
and Insert tools.
Fig. 4 Home Menu
Comment Menu
Comment Menu generally provides commenting tools (including Text Markup tools, Typewriter
tools, Drawing tools and comment management tools), measurement tools and stamp tools.
Fig. 5 Comment Menu
View Menu
Under the View Menu, you can get the “Go to destination” tools, viewing mode tools (including
Read Mode, Reserve View, Text Viewer), Magnification tools, Read Out Loud tools, Page Display
tools and View Setting Tools.
Fig. 6 View Menu
Form Menu
You may find Form Data under Form Menu, with which, you can import & export forms, reset
form, email forms and combine forms to a sheet.
Fig. 7 Form Menu
13
Protect Menu
Protect Menu includes Signature tool and signature validation tool. You can digitally sign
document or validate the signature with these tools.
Fig. 8 Protect Menu
Share Menu
Under the Share Menu, you can find tools to share documents to Evernote, Facebook or send
them via Email. Besides, SharePoint service tools which allow users to seamlessly check out and
check in PDF files located on SharePoint Server nest under this menu as well.
Fig. 9 Share Menu
Help Menu
The Help Menu contains Help tools which enable you to report error, get User Manual and the
Command Line instruction. Also, under this menu, you can check for update, set Foxit Reader as
the default PDF Reader, learn more about Foxit and check the plug-in installed.
Fig. 10 Help Menu
14
Changing Toolbar Modes

To change from Classic Toolbar Mode to Ribbon Mode, please choose View > UI Options >
Change Toolbar Mode > Ribbon Mode > OK.

To change from Ribbon Mode to Classic Toolbar Mode, please do one of the following:


Choose File > Change Toolbar Mode > click Classic Toolbar Mode.
(Alternatively) Choose Help > UI Options > Change Toolbar Mode > click Classic Toolbar
Mode.
Note: The feature can be effective after restarting Foxit Reader.
Work Area
Foxit Reader opens in two different ways: on its own (as a standalone application) and in a web
browser. The associated work areas slightly differ.
The Foxit Reader work area includes a document pane that displays PDFs and a navigation pane
on the left side that helps you browse through the current PDF. Toolbars near the top and
15
bottom of the window provide other controls that you can use to work with PDFs, including
toolbar pane, menu bar and status bar.
The Work Area for PDFs Open in the Application
Double-click the Foxit Reader icon on the desktop to start this program.
Choose File > Open, navigate to and select any PDF on your computer, and click Open.
A
B
C
D
E
F
User Interface in Ribbon Mode
A. Quick Access Toolbar B. Menu C. Ribbon D. Navigation Pane (Bookmark Panel displayed)
E. Status bar F. Document Pane
The Work Area for PDFs Open in a Web Browser
Open a web browser application.
Select a PDF anywhere on the Internet and click the link.
The PDF will be opened by Foxit Reader directly in the web browser.
16
A
B
C
D
PDF Open in a Web Browser
A. Web browser application menu bar and buttons
B. Foxit Reader toolbars
C. Navigation Pane (Bookmark panel displayed)
D. Document pane
Setting the Skin
This feature offers five skins so that you could change the appearance of the software.
To set the appearance of Foxit Reader, please do one of the following:

Choose File > Change Skin > click the skin as desired.
17

(Optional) Choose Help > UI Options > Change Skin > click the skin as desired.
Customizing the Work Area
As you get acquainted with Foxit Reader, you can set up your Reader work environment. The
more you learn about its potential, the more you can take advantage of its features, tools, and
options.
There is much more to the application than you see at first glance. Foxit Reader has hidden tools
and preferences that can enhance your experience and give you greater control over how your
work area is arranged and displayed.
There are two modes available in Foxit Reader: Classic Toolbar Mode and Ribbon Mode, two of
which differ a bit in User Interface. Therefore, work area customization varies accordingly.
Customizing Working Area in Classic Toolbar Mode
In Classic Toolbar Mode, you can choose to show or hide Menu Bar and toolbars. Also, locking
and moving toolbars is accessible in this mode. Please refer to the introductions below for
details.
About Menu Bar
Generally speaking, it is a good idea to keep the menu bar visible so that it is available as you
work. However, some users prefer to have as much space in Foxit Reader as possible. To get rid of
Reader menus temporarily, you should click View > uncheck Menu Bar.
You can temporarily display the Menu Bar again by right-clicking the toolbar and checking Menu
Bar.
About Toolbars
Foxit Reader enables you to change the appearance of the tools to suit your needs and working
style. You can add and delete buttons on the existing toolbars so that only the commands you use
most often will be displayed. To learn more about it, read the explanation below.
A
B
C
D
E
F
G
Toolbars open by default
18
A. Basic toolbar B: Go To Destination toolbar
C. Cursor Status toolbar
D. Find toolbar E. View toolbar F. Create PDF toolbar
G. Comments toolbar
Any toolbars can float or be docked. Docked toolbars appear in the toolbar area. Floating toolbars
appear as independent palettes that you can move anywhere in the work area.
1. Showing or Hiding Toolbars





To hide all toolbars, choose View > Toolbars > Hide Toolbars, or press the hotkey F8 on your
keyboard.
To show all toolbars, choose View > Toolbars > Show Toolbars, or press the hotkey F8 on
your keyboard.
To open a toolbar, choose View > Toolbars > [toolbar name].
To hide a toolbar, please do one of the following:
A. Right-click the toolbar area or choose View >Toolbars, and uncheck the toolbar you want
to hide.
B. Drag the toolbar you want to delete from its grabber bar to the document pane, click the
"Close" button at the top right corner of its title bar to hide it.
To change the visibility of several toolbars, please go to Edit > UI options > Customize
Toolbars, and then select and deselect the toolbars. A checkmark next to the toolbar name
indicates that the toolbar is currently visible.
2. Locking Toolbars
You can lock toolbars to prevent them from being moved. This feature is quite practical to
prevent users from accidently dragging a menu out of place.
To lock or unlock the toolbars, please right-click the toolbar and choose Lock/Unlock All
Toolbars.
3. Moving Toolbars





To rearrange the docked toolbars, use the toolbar grabber bars to drag them from one
position to another.
To float a docked toolbar, drag it by its grabber bar from the toolbar area.
To move a floating toolbar, drag it by its title bar to another location in the work area.
To dock a floating toolbar, double-click its title bar or drag it by its title bar to the toolbar
area.
To move all floating toolbars to the toolbar area, choose View > Toolbars > Reset Toolbars.
Note: To move a toolbar, drag the grabber bar
at the left edge of the toolbar.
19
Customizing Working Area in Ribbon Mode
In Ribbon Mode, tools are grouped by tasks. In this mode, Foxit Reader generally divides the
toolbars into Quick Access Bar, Menu Bar and Ribbon.
About Toolbars
Generally, the toolbars in Ribbon Mode include Quick Access Toolbar and Search Toolbar.
A
B
A: Basic Toolbar
1.
B: Search Toolbar
Adding Quick Access Toolbar
Quick Access Toolbar displays all your bookmarked tools. You can add tools that will let you view
and search content easily to your Quick Access Toolbar. This is another way for you to arrange
and manage all the tools.
To add quick access toolbar, please follow the steps bellow:

Click
on the quick access toolbar, and select More Commands shown as below.
20

Select the tools or separators you preferred to be shown on Quick Access Toolbar and add
them to the Quick Access Toolbar list. Click Up or Down to arrange the tool order and then
click OK.
To return toolbars to default configuration, please click
on the Quick Access Toolbar, choose
More Commands and click Reset on the pop-up context or press Alt+F8.
2.


Working with Toolbar in Ribbon Mode
To collapse/expand a toolbar classified by the toolbar tab, please click
or
at the
upper right corner.
If you want to use a tool after collapsing the toolbar, you can click the menu and then
choose the tool in the ribbon. When using the selected tool on PDFs, the toolbar will be
collapsed again automatically.
Setting Preferences & Viewing Properties
Setting Preferences
Although Foxit Reader is customizable, some of the customizable features may be difficult to find.
After reading this section, you will find out how useful having your own preferences can be, and
how simple it is to set up your own preferences.
To set preferences in Foxit Reader, please choose File > Preferences.
Note: You can use the arrow keys or Tab key to switch between different preference settings.
21
Accessibility
Document Colors Options
A. Replace Document Colors: Check to activate other options to change the document colors.
B. Use Windows Color Scheme: Sets document colors according to the color scheme of your
Windows preferences.
C. Custom Color: Changes the color of Page Background and Document Text.
D. Only change the content in Black/White color: Changes only the Black/White text and leaves
the colored text unchanged.
Commenting
A. Pop-up Opacity: Sets the opacity of popup notes for annotation tools.
B. Pencil Setting: Sets Pencil preference while making comments.
Create PDF
Create PDF feature allows users to set the Page Size of PDF to be created.
A. Fixed Size: Sets the size and direction of PDF through drop-down list.
B. Custom: Customizes the Page Size of PDF to be created. You can select the units first and
then set the width and height of page as needed.
Documents
The Document of the Preferences dialog provides several ways to browse PDF documents.
Open Setting
1. Allow Multiple Instances: Creates a new Foxit Reader window when double-clicked to open
a PDF file.
2. Allow document to Hide the menu bar/toolbars: Opens PDF file without menu bar and
toolbars. This option is checked by default.
3. Alert when document requests Full Screen: A message box will pop up to confirm the
operation when opening a PDF which has been defined to be opened in full screen mode.
4. In Web Browser, display PDF in Read mode by default: Opens a PDF in Read Mode
automatically in web browser.
5. In Foxit Reader, please choose the mode for displaying PDF file: Display the PDFs in Read
Mode or Full Screen Mode or normal way automatically when opening PDFs with Foxit
Reader.
Close Setting
Show the prompt message before closing all tabs: When you close a window with multiple
tabs, Foxit Reader will ask you to confirm your choice. This prevents you from accidentally
closing the whole window when you intend to close only the current tab.
Measurement Units
Sets unit of page dimensions given in the status bar and print dialog.
22
File Associations
This option allows users to set the default PDF Viewer.

Make Foxit Reader the default PDF Viewer:
Advanced
1. Include browser when setting default PDF viewer: check this option to set Foxit Reader as
the default PDF viewer in browser.
2. Include preview when setting default PDF viewer: check this option to set Foxit Reader as
the default PDF viewer in preview.
3. Include thumbnail when setting default PDF viewer: check this option to set Foxit Reader as
the default PDF viewer in thumbnail view.
4. Use Foxit Reader to open embedded Acrobat files in Microsoft Office: check this option to
set Foxit Reader as the default PDF viewer in Microsoft Office for opening embedded Acrobat
files.
 Make Default PDF Viewer: Makes Foxit Reader as default PDF viewer. Foxit Reader will be
set as the default PDF viewer according to your setting in Advanced item. For example, if
you check “Include browser when setting default PDF viewer” in Advanced item, and click
Make Default PDF Viewer to activate the setting, then PDF files will be displayed by default
with Foxit Reader in your Windows system as well as your browser.
 Restore File Associations: Restores settings in File Associations.
 Always perform check when starting Foxit Reader: If the default PDF viewer is not Foxit
Reader, a message box will appear for the options to set it as your default viewer every time
you run Foxit Reader.

Forms
The form tab enables you to set the preferences of the interactive form display.
Always hide document message bar: You can decide whether to show or hide the document
message bar that appears below the toolbar area when opening an interactive PDF form.
Highlight all fields: You can either highlight all fields or choose to highlight required fields to
your needs. You also can click the color panes next to change the highlight color.
Enable Autocomplete: When filling an interactive PDF form, this feature auto-fills the field
by predicting input based on the first few keystrokes typed based on any previously entered
words.
Email: You can edit the email title and contents which will be sent with the PDF form.
Full Screen
Full Screen Navigation
23
A. Select to show Scroll bar, Status bar, Tab bar or Navigation Panels in Full Screen mode.
B. Show Exit Button – Check or uncheck this option to show or hide Exit Button in Full
Screen mode.
C. One page at a time – Displays a single page at a time in Full Screen mode.
D. Left click to go forward one page; right click to go back one page -- Lets you page
through a PDF document by clicking the mouse. You can also page through a document
by pressing Space, Shift + Space, or the arrow keys.
Full Screen Appearance
Background – Click the color pane and choose the color you like to be the background color
in Full Screen mode.
Full Screen Transitions
Foxit Reader supports page transition in Full Screen mode. There are 11 transition types:
Split, Blinds, Box, Wipe, Dissolve, Glitter, Fly, Push, Cover, Uncover and Fade. Also, you could
set the direction for the transition.
A. Ignore all transitions: Check to ignore page transition in Full Screen mode.
B. Default transition –Choose page transition for one document in the drop-down window.
C. Direction - Set the direction for the transition.
General
The General Preferences setting provides options on Toolbar Settings, Snapshot Selection, Printer,
Text Link, Tab Bar, etc.
Basic Tools
A. Use fixed resolution for snapshots - Sets the resolution used to copy the image captured
with the Snapshot tool. Automatically uses 72 pixels as default resolution.
B. Create links from URLs - Detects the text links in PDF documents and change the
non-clickable links into clickable ones.
C. Minimize to system tray - You can save space on your task bar by minimizing the Foxit
Reader to system tray. Check it to minimize Foxit Reader to system tray when you click
the Minimize button.
D. Screen word-capturing - Check it to turn on this function that enables you to use your
mouse to capture words inside a PDF file and have it translated if you are using
dictionary software.
E. Make Hand Tool select text - Check it to enable hand tool to become text selection tool
when moving it to the selectable content.
Printer
Print Texts as graphics (ignore font substitution) – Sets the text font as graphics and printout
24
fonts are exactly the same as the text fonts. Automatically allows quick print where Printer
Font is substituted.
Tab Bar
Max tab size – Allows you to specify a maximum tab size.
Menu & Status Bar
A. Menu Exclusive Row – This option is checked by default.
B. Auto-hide Status Bar – Hides the status bar when opening a PDF, and enables it to float
at the bottom of the page only when the cursor is moved to the bottom.
Application Startup
A. Show Start Page: Check it to show the start page when running Foxit Reader.
B. Show Advertisement: Check it to show advertisement on the start page.
History
History
A. Restore last section when application starts: Determines whether documents start
automatically with the last viewed section.
B. Restore last view settings when reopening: Determines whether documents open
automatically with the last viewed settings.
C. Maximum number of documents in history list: Sets the maximum number of PDF
documents you read in history list. The default is 50 PDF documents.
D. Maximum number of documents in recently used list: Sets the maximum number of PDF
documents you read recently in “File” pull-down menu. The default is 4 PDF documents.
Note: Foxit Reader allows users to set “maximum number of documents in history list” and
“maximum number of documents in recently used list” to 0.
Identity


Login Name: Shows the identity of the application, using the current user of the operation
system by default. You cannot change the login name in Foxit Reader.
Name: You can input a name here, and it will be shown as author of annotations.
Languages
Foxit Reader provides the commonly used languages to meet customers’ needs to the upmost.
Usually, Foxit Reader will automatically choose the language applied to your OS as its default
during your installation. But changing languages after installation is supportable.
To change language after installation, please follow the steps below:
25
Choose File>Preferences>Languages.
Select Choose custom language.
Select the language in either Official Language or Translated by Community.
Click the website in the pop-up window to download the language package and Foxit Reader
will automatically install the language.
See also “Switching UI Languages”.
Page Display
The Page Display panel of the Preferences dialog box includes the following options:
Page Display
A. Navigation tab: specifies the panel to be displayed in the opening view.
a) Use Initial View: minimizes the Navigation panel and hides all panels.
b) Page Only: displays Pages panel by default in opening view.
c) Bookmarks Panel and Page: displays Bookmarks panel by default in opening view.
d) Pages Panel and Page: displays Pages panel by default in opening view.
e) Attachments Panel and Page: displays Attachments panel by default in opening view.
f) Layers Panel and Page: displays Layers panel by default in opening view.
B. Default Page Layout: You can view PDFs in following layouts:
a) Single Page -- Displays one page at a time, with no portion on other pages visible.
b) Continuous -- Displays pages in a continuous vertical column that is one page wide.
c) Facing -- Displays each two-page spread with no portion of other pages visible.
d) Continuous Facing -- Displays facing pages side by side in a continuous vertical
column.
See also “Changing the Page layout”.
C. Display transparency grid: Displays a grid behind transparent objects.
D. Custom Facing: The Default Facing for page layout is 2 pages. You can check the Custom
Facing box and set the facing layout to your own preference.
E. Custom Margin: Sets the margins between different pages with Facing or Continuous
Facing page layout. The default is a margin of 8 pixels.
F. Smooth Text: Optimally adjusts text display that best suits your monitor.
G. Use Logical Page Numbers: Open PDFs with the logical page numbers.
Magnification
A. Default Zoom: Sets the magnification level for PDF documents when they are first
opened. This value overrides document settings. The default uses the settings of the
PDF document.
B. Forbid the change of the current Zoom factor during execution of ‘Go to Destination’
actions (these actions can be launched from bookmarks): Check to forbid user to
change the current Zoom factor during execution of ‘Go to Destination’.
26
See also “Changing the Magnification Level of a Document”.
PDF Sign
Convert PDF Sign signature to black white: check this option to sign PDFs in black & white color.
Reading
Page Vs Document
This preference determines how much of a document is delivered to a screen reader at a
time. If a PDF isn’t tagged, Foxit Reader may analyze the document and attempt to infer its
structure, which can take a long time for a long document. You may want to set Foxit Reader
to deliver only the currently visible page so that it analyzes only a small piece of the
document at a time. This consideration will vary depending on the size and complexity of
the document and on the features of the screen reader.
A.
B.
C.
Only read the currently visible pages - This option is usually best when using a screen
magnifier. It improves performance by eliminating the need for the software to process
parts of the document that aren’t visible. When Foxit Reader sends only the currently
visible pages of a PDF to the memory buffer, the assistive technology has access to
those pages only. It cannot go to another page until the next page is visible and Foxit
Reader has sent the page information to the memory buffer. Therefore, if this option is
selected, you must use the navigation features of Foxit Reader, not those of the
assistive technology, to navigate from page to page in the document. You should also
set the Default Page Display option in preferences to Single Page if you choose to have
Reader send only the currently visible pages to the assistive technology.
Read the entire document - This option can be best if you use a screen reader that has
its own navigation and search tools and that is more familiar to you than the tools in
Foxit Reader.
For large documents, only read the currently visible pages - This option is selected by
default and is usually best if you use a screen reader with long or complex PDFs. It
allows Foxit Reader to deliver an entire small document but revert to page-by-page
delivery for large documents.
Minimum number of pages in a large document
When the “For large documents, only read the currently visible pages” option is selected, it
allows you to set this minimum value.
Signature

Verify signatures once the document is opened.
27
Speech




Volume: Sets the reading volume of Read out Loud.
Use default voice: Check it to read content with default language, or you can select the
required one from the combo box.
Use default speech attribute: Check it to read with default pitch and rate, or you can
uncheck it and then set pitch and rate in the combo box as needed.
Read comments: Check it to enable the application to read out the comments when
executing Read out Loud.
Spelling

Enable spell check: Check “Enable spell check” to avoid spelling error.
Trust Manager
Please refer to “Trust Manager”.
Updater



Automatically install updates (only for the patch): The system will automatically download
and replace the original files in the installation folder when there is a new version.
Automatically download updates but let me choose when to install them (Default): The
system will automatically download and display a message informing you of the upgrade and
allow you to choose to upgrade to the new version. This option is checked by default.
Do not download or install updates automatically: Never download or install updates
automatically.
Viewing Properties
The Properties window provides information about the document, including the document’s
location, title, subject, author, fonts used, security settings, etc. This window also displays
attributes set by other programs.
To view the PDF properties, please choose File > Properties. You can acquire all relevant
information as follows:
28
Description Tab of Properties Window
Description
This tab shows some basic information about the document. The title, author, subject, and
keywords may have been set by the person who created the document in the source application.
General










File—The location of the document.
PDF Version—The standard version of the document.
PDF Size—The size of the document.
Pages—Total number of pages of the document.
Title -- A general or descriptive heading of the document.
Subject -- The principal idea and point of the document.
Author -- The writer of the document.
Creator -- The application that produced the original document.
Producer -- The application or driver that converted the original document into a PDF
document.
Keywords -- The words that are used to reveal the internal structure of an author's
reasoning.
Related Dates


Last Modified -- The date and time the document was last modified.
Created -- The date and time the document was created.
29
Show More Description
This option will show you more description about the document properties, including general
information, security, details and previous versions (as shown below).
Security
The Security tab describes what changes and functionality are allowed within the PDF. If a
password, certificate, or security policy has been applied to the document, the method is listed
here. Changing security setting is not allowed in Foxit Reader.
30
Security Tab of Properties Window
Fonts
The Fonts tab lists the fonts and the font types used in the original document, as well as the
encoding used to display the original fonts.
Fonts Tab of Properties Window
About Navigation Pane
The navigation pane, located next to the document pane, can display different navigation panels,
including Layer panel, Attachments panel, Pages panel, Comments panel, Bookmarks panel,
31
Security Settings panel and Digital Signature panel. Please note that the navigation pane is
unavailable when Foxit is open but empty (no PDF is open).
The buttons on the left side of the navigation pane provides easy access to various panels, such
as the Bookmarks panel button
, the Pages panel button
, and the Layers panel
.
To show the navigation pane, choose View > Navigation Panels > Show Navigation Panels, or
use keyboard shortcut F4.
To open a navigation panel, you can either click its button on the left side of the navigation
pane, or choose View > Navigation Panels > [navigation panel name].
To close the navigation pane, choose View > Navigation Panels > Hide Navigation Panels, or
use keyboard shortcut F4, or right click on title of the navigation panel and select Hide
Navigation Panels.
Tip: To show or hide the navigation pane, you can also click on the
corner of the navigation pane.
button at the top right
Adjusting the Navigation Pane
Like the toolbars, the navigation panels can be docked in the navigation pane or they can float
anywhere in the work area of Foxit Reader. You can choose to hide or close the panels that you
don't need and open the ones you do. What’s more, you can also adjust the width of the
navigation pane easily.
1. Viewing a Panel in the Navigation Pane
By default, all the panels dock in the navigation pane with a set of panel buttons appearing on
the left side of the work area.
Do one of the following:
Select the button for the panel on the left side of the navigation pane.
Choose View > Navigation Panels > [panel name].
2. Changing the Display Area for Navigation Pane
To change the view area of the navigation pane, drag its right border to adjust the width.
To minimize or maximize the navigation pane, click on the button
at the top right
corner of the navigation pane.
To expand the navigation pane, click
at its top right corner and the navigation pane will
be expanded to occupy the whole pane of Foxit Reader.
3. Docking or Floating a Navigation Panel
32
To float a navigation panel, drag the panel button into the document pane.
To move a panel, drag it by its panel button to another location.
To dock a floating panel, double-click its title bar.
To group two floating panels, drag the title bar of one panel into the other floating panel.
Customizing Shortcut Keys
People’s habits using the keyboard are different and the familiarity to the buttons on a keyboard
is distinct. The intellectualized Foxit Reader allows you to customize the shortcut keys according
to your habit, which enables you to use the shortcuts more conveniently than before.
To customize toolbars, please follow the steps below:
Click
on Quick Access Toolbar >select More Commands. In the popup Customize Tools
dialog box, select Keyboard tab.
Choose the tool’s category in the Categories list and the action in the Command list.
Input the appropriate shortcut with your keyboard. Click Assign to apply the shortcut. If you
want to change the shortcut, just input the new one to replace it directly. The Reset All
button can recover the default setting.
Note: The shortcut keys that have already being used cannot be reassigned. A message under the
input tab will show you whether the shortcut key has been used by another command.
Switching UI Languages
To change the UI language of Foxit Reader, please go to File>Preference> Language.
33
Use default language—Makes English as the UI language.
Choose the custom language—Selects your localized UI language from the list.
Choose language provided by the community—Selects the language translated by
volunteers on Foxit multi-language translation system.
When switching UI language, you may meet one of the following cases:
If the UI language package exists on your computer, the UI will be switched in a flash into the
language you selected.
If you don’t have the UI language package on your computer but available on Foxit server, a
prompt message will pop up asking you whether or not to download the language kits.
If the UI language package is unavailable on Foxit server, a prompt message will pop up
giving you a notice that you can get the UI language package on our website. In addition,
you can also help us to do some translation so that we can localize Foxit Reader into your
own language. To visit our multi-language translation system, please click here.
34
Chapter 3 – Viewing PDFs
Once the Foxit Reader is properly installed, you can open and view PDF files easily. When you
have a PDF open, you can also adjust the view of the document, find text in it, email to others,
etc.
Opening & Saving & Closing PDFs
Opening Documents
You can open and view PDFs in Foxit Reader from the desktop, or in a web browser.
Opening a PDF document in Foxit Reader
Start in the Start Page to Foxit Reader Window
When you open Foxit Reader, a Start Page will be opened by default, which introduces some
product information of Foxit.
If you do not want to show the start page, please go to File > Preferences > General > Application >
Startup > uncheck Show Start Page.
Opening a PDF Document in Foxit Reader
Do one of the following:
Choose File > Open, or click the Open button
on the Quick Access Toolbar. In the Open
dialog box, select the file and click Open. PDF documents are usually identified with .pdf
extension.
Drag and drop the PDF file into the Foxit Reader window.
Note: You can open more than one PDF document within the same Foxit Reader application.
When you open more than one file at a time, you can navigate the PDF files easily by clicking the
corresponding tabs. If you only open one PDF, the tab will not be shown.
Opening a PDF Document from Desktop or within Other Applications
If you set Foxit Reader as your default viewer for PDF files, you are able to launch and open PDF
files in the following applications:
Email Application: In most email applications, you can double-click the attachment icon to
35
open the document.
Web Application: You can open a PDF document by clicking on the PDF file link in your web
browser.
File System: Double-click the PDF file icon in your file system.
Note: You can see the size of the opened document at the bottom right corner of the window. For
example
. To set the unit of page dimensions, please refer to “Measurement Units”.
Opening a Secured PDF Document
If you receive a PDF that is protected by security features, you may need a password to open the
document. Some protected documents have other restrictions that prevent you from printing,
editing, copying, etc.
When opening a protected PDF, you will be prompted to enter the password.
When trying to copy or edit a secured PDF, you will find that the related functions or tools
are disabled and grayed out.
Retrieving Recently Opened Documents from within Foxit Reader
In the Open page under File menu, you will be able to instantly retrieve recently opened
documents. Foxit Reader provides a list of recently opened PDF documents. Just choose File >
Open > Recent Documents, and you can see the recently opened documents in Recent
Documents list.
Note: To customize the number of document in recently used list, please refer to “Maximum
number of documents in recently used list”.
36
Saving Documents
Foxit Reader provides you with the power to do more when saving PDF documents. You can save
a PDF document without additional usage rights in many different ways. If the file permissions
allow, you can also save comments, form fields that you have added to a document, as well as
save PDF contents in text format.
Saving a Copy of a PDF
Choose File > Save As > Computer.
Choose a folder (current folder or recent folder) or click Browse to select desired location.
In the Save As dialog box, enter the filename and click Save.
(Optional) Choose “Add a place” to save PDF files to a SharePoint repository. For detailed
steps, please follow “Save as PDF files to a SharePoint repository”.
Saving Comments and Form Field Entries
Do one of the following:
Choose File > Save.
(Alternatively) Choose File > Save As > Computer > choose a folder (current folder or recent
folder) or click Browse to select a desired location > enter the filename > choose Document
and Annotations in Save What field > click Save.
Saving a PDF as a Text File
Choose File > Save As > Computer.
Choose a folder (current folder or recent folder) or click Browse to select a desired location.
Choose TXT Files (*.txt) from the Save as type field in the Save As dialog box.
Click Setting beside Save what field to choose the content range:
A. Save whole document – save the whole document as a text file.
B. Save current page – only save the current page you are reading as a text file.
C. Save page in range – enables you to select pages as a text file.
Enter the filename and click Save.
Closing Documents
To close a PDF document, please do one of the following:
Choose File > Close.
Press shortcut key Ctrl + W.
37
Exiting Foxit Reader
To exit Foxit Reader, please do one of the following:
Click the big Close button
on Foxit Reader application window.
Press shortcut key Ctrl + Q.
Viewing Documents
Multi-tab Browsing & Single/Multiple Interface Mode
Foxit Reader provides three different ways for you to read PDF files: multi-tab browsing, single
document interface mode, and multiple document interface mode.
Multi-Tab Browsing
The multi-tab browsing feature enables you to open multiple files in a single instance. If you
already have a PDF open and then double-click another pdf file, it will be opened in the same
window.
Opening a New Tab
To open a new tab, you can double-click a PDF file, select File > Open, or click the Open button
on the toolbar.
Closing a tab
To close the current tab, you can do one of the following:





Click the Close Tab button
at the top right corner of the Tab Bar.
Double-click on the Tab Bar.
Click the middle button of the mouse on the Tab Bar.
Right-click on a tab and choose Close Tab /Close Others/Close Left/Close Right.
Select File > Close.
To close all tabs at the same time, click the Close button
at the top right corner of Foxit
Reader window, or right-click on a tab and choose Close All.
38
Single Document Interface Mode
The single document interface mode enables you to open multiple instances of Foxit Reader.
Foxit Reader will create a new window when you double-click to open a new PDF file, which is
very useful for viewing different files side by side.
To enable single document interface mode, please go to File > Preferences > Documents >
Open Setting > check the option of “Allow Multiple Instances”.
To disable single document interface mode, please go to File > Preferences > Documents >
Open Setting > uncheck the option of “Allow Multiple Instances”.
Multiple Document Interface Mode
The multiple document interface mode sets multiple documents under a single parent window,
as opposed to all windows being separated from each other (single document interface).
To enable multiple document interface mode, please go to File > Preferences > Documents >
Open Setting > uncheck “Allow Multiple Instances” option.
To disable multiple document interface mode, please go to File> Preferences > Documents >
Open Setting > check “Allow Multiple Instances” option.
Text Mode & Reade Mode
Text Mode
With Foxit Text Viewer, you can work on all PDF documents in pure text view mode. It allows you
to easily reuse the texts scattered among images and tables, and acts like Notepad. Also, you can
adjust some settings to meet your needs.
Entering Text Mode
Do one of the following:
Click the Text Viewer icon
on the Basic Toolbar.
Press the shortcut key Ctrl+6.
Customizing Text Viewer
As soon as Text Viewer is activated, you can use the Text Viewer Toolbar to customize your own
work area. This Toolbar is set to be invisible by default.
1. Changing text font when reading with Text Viewer
39
Right-click on the text, choose Font Setting from the Context Menu, and then select the Font
option.
Choose Font name, Font Style, Font Size, Effects, Color and Script from respective fields in
Font dialog box. The suggested font for best screen display is Courier New.
Note: You can change all aspects pertaining to text view font in the Font dialog box, or you can
also use individual options on Context Menu to change font color and toggle between regular
style and Bold or Italic styles.
2. Toggling between regular style and Bold style
Select the text and right click on it. Choose Font Setting from the Context Menu, and then select
the Bold option.
3. Toggling between regular style and Italic style
Select the text and right click on it. Choose Font Setting from the Context Menu, and then select
the Italic option.
4. Changing Text Viewer settings
Right-click the text, and choose Setting from the Context menu.
The text Viewer Settings dialog box pops up.
40
Below are the text viewer settings:
A. Set page width at three different levels: Current page width, Current document width
and System default width.
B. Minimal width – The valid value for this field is 0-1024. It is set to 78 by default.
C. Keep Column – For PDF tables or text columns, you can check Keep Column to retain
appropriate column in text viewer mode. It is checked by default.
D. Auto Width – For PDF tables or text columns, you can check Auto Width to keep
proper width between texts automatically. It is checked by default.
E. Auto Rotate – You can check Auto Rotate to ensure consistent orientation with that
of the printer. It is checked by default.
Navigating in Text Viewer Mode
1. Going to the next or previous page
Do one of the following:
Choose View and click
Click Previous Page
or
on the toolbar
or Next Page
on the status bar.
Put the cursor in the Document Pane, press the Left or Right Arrow on keyboard to move
the pages up or down.
Press the Space Bar or Shift + Space to move the pages up or down.
2. Going to the first or last page
Do one of the following:
41
Choose View and click
or
Click the First Page icon
on the toolbar.
or the Next Page icon
on the Status Bar.
Press the Home or End keys.
3. Going to a specific page
Do one of the following:
Choose View > input the specific page number in Go To ribbon
> press
Enter.
Input or select the specific page number on the Current Page Number Box
on Status Bar, and press Enter.
Note: If the opened PDF document contains logical page numbers, Foxit Reader supports
displaying the logical page numbers on the Current Page Number Box.
Changing the Magnification Level of a Document
Choose View > Tools > Zoom > Zoom In or Zoom Out. Or you can select a percentage as required
on the context pane under Zoom.
Finding text in Text Viewer Mode
To find text you are looking for, follow the steps below:
Press Ctrl + F.
Type the text in the Find What field.
Select the search options to limit your search:
A. Whole Words only -- limits the search to match only whole words. For example, if you
search for the word Read, the word Reader will not be found.
B. Case-Sensitive -- makes the search case-sensitive. For example, if you search for the
word text, the words Text and TEXT will not be found.
C. Include Bookmarks—find text in Bookmarks also.
42
D.
Include Comments—find text in comments also.
E. Include Form Data—find text in form data also.
Press Enter and Foxit Reader will jump to the first instance of the search term, which
appears highlighted.
Press Enter repeatedly or shortcut key F3 to continue searching the next instances of the
search term.
Read Mode
In Read Mode, the PDF will be displayed in a way that hides much of the interface, including
navigation pane, toolbar, and status bar, to maximize the document display area. It enlarges the
document pane, keeping users from wasting reading space, leaving the menu bar with user for
necessary operations.
To read a document in Read Mode, please choose one of the following:

Choose View > Read Mode

Press the shortcut key “Ctrl + H” on the keyboard.
Right-click the document pane > Read Mode.

in the Document Views ribbon.
In Read Mode, a basic toolbar floats at the bottom of the page. It offers some basic tools, such as
save, print, zoom in/out, etc. Please move the cursor to the bottom to activate the floating box.
If you open more than one PDFs, please press “Ctrl + Tab” on the keyboard to switch through
them in Read Mode.
Read Out Loud
Read Out Loud is a Text-to-Speech (TTS) tool. It reads the text in a PDF aloud, including the text in
comments and alternate text descriptions for images and fillable fields. With this feature, you can
obtain information without viewing the pages, helping to effectively relief eyestrain. It also
enables you to view other materials while listening to the content.
To use the Read Out Loud, please choose one of the following:

In Normal Mode, please right-click the toolbar > choose Read, or go to View > Read out
Loud.

In Ribbon Mode, please go to View > Read tool
> Read Current Page or Read from
Current Page.
Set Reading Preferences
Please go to File > Preferences > Reading.
43
Page vs. Documents:
1. Only read the currently visible pages – Reads the visible page which is displayed in the
current window.
2. Read the entire document – Reads every page of the document in order.
3. For large documents, only read the currently visible pages – If you open a large PDF, the
system reads only current pages which are visible in the window.
4. Minimum number of pages in a large document – Sets the minimum number of pages. If the
number of pages exceeds the setting number, the document will be defined as a large
document.
Reading Actions
In Read Mode, some simple actions are offered for users to control the reading status, including
read from current page, read current page, pause, stop, rate up, rate down, volume up and
volume down.
To read the document, please follow the steps below:

Choose View > Read tool
in Assistant ribbon.

Click Volume tool

Click Rate tool


Click Pause tool
to pause.
Click Stop from the drop-down menu to stop reading.
> drag the slider to adjust the volume of reading.
> drag the slider to adjust the rate of reading.
Read Out Loud uses the available voices installed on your system. If you have SAPI 5 voices
installed from text-to-speech or language applications, you can choose them to read your PDFs.
Note: Read Out Loud isn’t a screen reader, it may not be available in some operating systems.
Split View
Using Split View, you can view a PDF with the document pane divided into two panes (Split
command) or four panes (Spreadsheet Split command).

With the Split View, you can scroll, change the magnification level, or turn to a different
page in the active pane without affecting the other pane(s).
To change to Split View, choose View > click Split tool
in Page Display ribbon > choose Split.
44

The Spreadsheet Split view is useful if you want to keep the vertical or horizontal headings
visible while scrolling through a large spreadsheet or table of the current page. In this mode,
changing the magnification in one pane can make the magnification in all panes be changed
in the same time. Also, scrolling is coordinated among the panes.
Note: If you stay in the same page when scrolling horizontally, the above two spans which
show the headings will not be scrolled. But if you scroll to the next page, the above spans
will also skip to show the headings of the next one’s. When scrolling vertically, the two
panes in the same queue will be scrolled, while the panes next to them will not.
To change to Spreadsheet Split View, you should Choose View> click Split tool
Display ribbon > choose Spreadsheet Split.
in Page
45
Full Screen Mode & Fit the Window Mode
Full Screen Mode
In Full Screen mode, Foxit Reader Document Pane fills the entire screen, with Menu Bar, Toolbar,
Status bar, and Bookmarks pane hidden behind. The mouse pointer remains active in Full Screen
mode so that you can click links.
1. To set Full Screen preferences, please refer to “Setting Full Screen Preferences” .
2. To enter Full Screen mode, please do one of the following:
Click the Full Screen button
on the right of the Toolbar.
Press the shortcut key F11.
Right-click the Document Pane and select Full Screen.
3. To adjust the view in Full Screen mode, right-click the document and work with the Context
Menu.
Note: This feature will not be available unless you clear Left click to go forward one page; right click to
go back one page check box in the Preference dialog.
4. To Exit Full Screen Mode:
Press Esc key or the shortcut key F11.
Fit the Window Mode
There are four types for you to choose:
To resize the page to fit entirely in the document pane, choose View > Zoom > Fit Page, or
right-click the Document Pane and choose Fit Page.
To resize the page to fit the width of the window, choose View > Zoom > Fit Width, or
right-click the Document Pane and choose Fit Width. Part of the page may be out of view.
To resize the page to its actual size, choose View > Zoom > Actual Size, or right-click the
Document Pane and choose Actual Size.
To resize the Document Pane to fit page by visible area, choose View > Zoom > Fit Visible.
Adjusting the View of Documents
Foxit Reader provides multiple tools that help you adjust the view of your PDF documents. It
includes simple tools such as Zoom In and Zoom Out, as well as more advanced tools like setting
the page layout and orientation. As for some settings, please refer to “Setting Preferences”.
46
Changing the Orientation of a Document
You can change the orientation of the document from portrait to landscape view by using the
Rotate tools.
Choose View > Rotate View under Page Display ribbon> Rotate Left or Rotate Right.
Note: You can change the page view in 90-degree increments, but the change only affects screen
display instead of its actual orientation. You cannot save the changes in page view.
Changing the Magnification Level of a Document
Do one of the following procedures:
1. Go to View > Zoom > Zoom Out or Zoom In.
2.
Adjust
a
magnification
percentage
in
the
Magnification
Percentage
Area
on the Status Bar.
3. Go to View > Zoom >choose a magnification percentage.
4. Right-click the Document Pane > Zoom In or Zoom Out.
5. Using the Loupe Tool

Choose View and click Loupe tool

Move the loupe tool to the places you want to view, you will see the amplificatory or
decreased objects in the Loupe Tool dialog box.
(Optional) Select the Lock option in the Loupe Tool dialog box. Click the area of the
document you want to view in closer detail. A red rectangle appears in the document,
corresponding to the area shown in the Loupe Tool window. You can drag or resize the
rectangle to change the Loupe tool view.
To change the scale ratio of the Loupe Tool, you can either enter a value in the zoom text
box, or drag the slider in the Loupe Tool dialog box.


in the Assistant ribbon.
6. Using the Magnifier
You can easily magnify areas of the PDF files as you work on Foxit Reader with this free tool. It
is especially useful for visually impaired people with some functional vision.
47
Magnifier
Fisheye Magnifier
Choose View and click Magnifier
in the Assistant ribbon.
Move the Magnifier to the places you want to view.
To switch between Magnifier and Fisheye Magnifier, press the left mouse button.
To change the size of magnifier window, press the right mouse button.
To turn off the Magnifier, choose any other tools or press ESC Key to directly return to
Hand Tool.
Changing the Page Layout
Changing page layout is especially useful when you want to zoom out to get an overview of the
document layout. Foxit Reader provides the following page layouts:
Single Page – Displays one page in the document pane at a time.
Continuous – Arranges the pages in the document pane in a continuous vertical column.
Facing – Arranges the pages side by side, displaying only two pages at a time.
Continuous Facing – Arranges the pages side by side in a continuous vertical column.
Separate Cover Page–Show Cover Page During Facing.
If a document has more than two pages, the first page can be displayed alone on the right side of
the document pane in Facing and Continuous Facing views.
To display the cover page as the first page on the right followed by two facing pages, please
choose the Facing or Continuous Facing mode, and then select View > Separate Cover Page
in the Page Display ribbon.
To set page layout, please do one of the following:
Choose View and choose one of the modes to your needs.
Click the Single Page button
, the Continuous button
, the Continuous Facing button
48
, or the Facing button
on toolbar or the Status Bar.
Navigating in Documents
Foxit Reader provides user-friendly controls to navigate through PDF documents. You can
navigate in PDF documents by paging through or by using navigational tools.
Scrolling through Documents
1. Navigating around Documents
Do one of the following:
Using mouse actions or keystrokes
Scroll the mouse wheel or press the Down or Up Arrows on the keyboard to navigate
around the documents.
Scroll automatically
Automatic scrolling allows users to view documents without using mouse actions or
keystrokes. Foxit Reader also enables you to change the scrolling speed with ease.
A. Choose View and click AutoScroll
in the toolbar.
B. Do one of the following:

To increase or decrease the scrolling speed, press the Up Arrow or Down Arrow key,
depending on the direction of scrolling.

To reverse the direction of scrolling, press the minus sign (-) key.

To jump to the next or previous page, press the Space Bar or Shift + Space Bar.

To stop automatic scrolling, click AutoScroll

To pause automatic scrolling, press Space key.
again.
Tip 1: To perform auto-scrolling, you can also click the Hand Tool
, hold the middle
mouse button/wheel mouse button down, and then move the mouse to scroll the pages.
Tip 2: To go back to Hand Tool
mode, just press and hold the space key.
2. Going to the next or previous page
Do one of the following:
Click the Previous Page icon
or the Next Page icon
on Go To ribbon under View
49
Menu or
/
on the Status Bar.
Put the cursor in the Document Pane, press the Page Up or Page Down keys to turn the
pages.
Put the cursor in the Document Pane, press the Left or Right Arrows on the keyboard to
move the pages up or down.
Press Space to scroll the page down or press Shift + Space to scroll the page up.
3. Going to the first or last page
Do one of the following:
Click the First Page icon
or the Last Page icon
Menu or
/
on the Status Bar.
Press the Home or End keys.
on Go To ribbon under View
4. Going to a specific page
Do one of the following:
Choose View and input the specific page number on the Current Page Number Box
and press Enter.
Input or select the specific page number on the Current Page Number Box
on the Status Bar, and press Enter.
Note: If the opened PDF document contains logical page numbers, Foxit Reader supports
displaying the logical page numbers on the Current Page Number Box.
5. Retracing your steps
To go back or forward one page, click the Previous View button
or Next View button
on the Toolbar under View Menu or Status Bar.
(Alternatively) Choose View and click Previous View or Next View in Go To ribbon.
Navigating With Bookmarks
Bookmark displays the list of bookmarks that the document contains. Generally speaking, it is a
visual table of contents that represents the chapters, main headings, and other organizational
elements in a document.
1.
To show or hide bookmarks, do one of the following:
Choose View > Navigation Panels > Bookmarks.
50
Click the Bookmark button
on the Navigation pane.
Click the button
at the top right corner of the Navigation pane to minimize or
maximize bookmarks.
2.
To jump to a topic, click the bookmark or right-click the bookmark and then choose “Go to
Bookmark”. Click the plus (+) or minus (-) sign to expand or collapse the bookmark contents.
Tip: When you navigate through the PDF document, the highlighted bookmark item will
automatically be kept in sync with the current page being displayed.
3.
To expand the current bookmark
To select the bookmark for the displayed page of the PDF document, click the Expand the
Current Bookmark button
at the top of the Bookmarks panel.
If the bookmark was hidden in a collapsed parent bookmark, the parent bookmark will be
opened, and the corresponding bookmark which is nearest to the current page’s location will be
highlighted, so that users can see the selected bookmark and locate the related item on the
current page.
Navigating with Page Thumbnails
Page thumbnails are reduced-size versions of PDF pages. It provides miniature previews of
document pages and makes it easier to view and recognize them. The red box in the page
thumbnail indicates which area of the page appears.
A. To show or hide page thumbnails, do one of the following:
Choose View > Navigation Panels > Pages.
Click the Page button
Click the button
on the Navigation pane.
at the top right corner of the Navigation pane to minimize or
maximize Pages panel.
B. To navigate with page thumbnails, do one of the following:
To jump to another page, click its thumbnail.
To move to another location of the current page, drag and move the red box in its
thumbnail.
To resize the visible area of the current page, drag the resize handle on the bottom right
corner of the red box.
To resize page thumbnails, right-click on a thumbnail, and then choose “Enlarge Page
51
Thumbnails” or “Reduce Page Thumbnails”. Or click
or
on the top of Pages panel
to enlarge or reduce page thumbnails separately.
C. In the Single Page Displaying Mode, the page thumbnails will show up when dragging the
scrollbar to view the page.
1. To add an action to a page thumbnails, please refer to “Adding an Action to a Bookmark”.
2. Ctrl + click or Shift + click to select multiple page thumbnails at one time.
Navigating with Links
Links take you to another location in the current document, or to locations in other documents
or websites. Clicking a link on PDF documents is just the same as in other applications. You can
follow a link by doing the following:
Select the Hand tool
.
Position the pointer over the link until the pointer changes to the hand with a pointing
finger
.
Finding Text
Foxit Reader provides handy tools to find text. You can not only search text in a PDFs, folders, or
disks, but also in portfolios. Also, you can limit your search by choosing the options offered on
the Find Text dialog box to find specific items.
Finding Text in the Current PDF
To find text you are looking for, follow the steps below:
Type the text in the Find EditBox
Click Find Previous or Find Next tools
at the upper right corner of the document.
to locate to relevant match.
(Advanced Searching) Select a search option on the drop-down menu of Filter
Find Editbox to limit your search:
next to
A. Whole Words Only -- Limits the search to match only whole words. For example, if you
search for the word Read, the word Reader will not be found.
B. Case-Sensitive -- Makes the search case-sensitive. For example, if you search for the
word text, the words Text and TEXT will not be found.
C. Include Bookmarks -- Enables you to search the text in bookmarks.
D. Include Comments -- Enables you to search the text in comments.
52
E. Include Form Data –Enables you to search the text in form data.
Note: C/D/E options will be active for finding text in the current PDF document and doing the
advanced search.
Foxit Reader jumps to the first instance of the search term, which appears highlighted.
Press Enter repeatedly or shortcut key F3 to continue searching the next instances of the
search term.
Doing Advanced Search
The search function enables you to search a string either in a single PDF file or in multiple PDF
files under a specified folder. When the search finishes, all occurrences will be listed in a tree view,
allowing you to quickly preview the contexts and jump to specific locations.
1. Searching Text
To search text you are looking for, follow the steps below:
Click Search Tool
next to Find EditBox.
In the Search Window right beside the Document Pane, type the text you want to search for.
Below “Where would you like to search?”, check one of the following to define the searching
field.
A. To search the text in the current PDF document, select “In the current PDF document”.
This option will be grayed out if no document is open.
B. To search the text in all PDF documents in specific files or disk, select “All PDF
Documents in” > choose one of the disks or User-selected search paths. Foxit Reader
will show the path of the currently opened document for easier location.
C. To search the text in selected documents in PDF portfolio, please select “Selected PDFs
in portfolio”. This option will be grayed out if no document is selected.
D. To search text in the PDF portfolio, please select “All PDFs in portfolio”. This option will
be selected by default if you are at the portfolio screen but has no document opened.
Besides selecting the path of text to be searched, you can also set Find Options.
A. To limit the search to match only whole words, check “Whole words only”. For example,
if you search for the word Read, the word Reader will not be found.
B. To make the search case-sensitive, check Case-Sensitive. For example, if you search for
the word text, the words Text and TEXT will not be found.
C. To search words in comments, please check Include Comments.
D. To search words in bookmarks, please check Include Bookmarks.
E. To search words in form data, please check Include Form Data.
Click Search button.
53
The results appear in the page order. Each item listed includes a few words of context and an
icon that indicates the type of occurrence. If necessary, click the plus sign (+) to expand the
search results. Then select an instance in the results to view that instance in the PDF.
(Optional) Click the New Search button to start a new search task.
2. Moving and Resizing Search Box
The advanced search box can float or be docked. You can also resize the box with ease.
To float the docked search box, please drag it by its title bar to another location in the work
area.
To move the floating search box, drag it by its title bar to another location in the work area.
To resize the floating search box, drag any corner point to adjust.
To dock the floating search box, double-click the title bar or drag it by the title bar to its
original location.




Playing a Movie or a Sound Clip
PDF has extended itself to the richness of multimedia support and playing capabilities. Some PDF
files may be multifaceted with multimedia, including sound, music and video clips. Each movie
and sound file usually includes a play area from which the media can be activated. The play area
typically appears on the PDF page as an image or a blank rectangle, but can also be invisible. To
play the media files, please make sure you have the necessary media player installed on your
computer.
To play a movie or a sound, please do the following:

Select the Hand tool
, and click the play area of the movie or sound file. When the
pointer is positioned over the play area, it changes to the play mode icon.
Note: To protect your computer from viruses, Foxit Reader will pop up a dialog box soliciting your
approval before playing multimedia files.
For more information, please refer to “ Adding Video & Audio” for details.
Working with Asian Languages in PDFs
If you try to open PDF files for which the correct language font kits have not been installed on
your computer, you will automatically be prompted by Foxit Reader to download and install the
required language font kits. As soon as you have the correct font kits installed on your computer,
Foxit Reader lets you view, search, and print PDF documents with Asian (Traditional and
Simplified Chinese, Japanese, and Korean) language text.
54
Note: To open language specific PDF files with Foxit Reader, Non-English Language Font Kits must
be installed under the same directory that Foxit Reader application file FoxitReader.exe resides.
Thumbnails Preview in Windows
Once Foxit Reader has been set as the default PDF viewer, it will display the PDF files as
thumbnails in Windows instead of Foxit's icon when you open certain folder.
Note: Currently this feature can be supported by Windows OS 32 bit and Windows 7 64bit.
55
Chapter 4 – Working on PDFs
With Foxit Reader, you can copy text and images to other applications, share documents on
Facebook, and stamp PDFs. To learn more about this, please read the following explanations.
Select & Copy
With Foxit Reader, you can copy texts and images to other applications.
Copying Text
The Select Text tool lets you select horizontal and vertical text or columns of text in a PDF. To
copy text, click Select Text Tool
in Tools ribbon under Home Menu and do the following:
Selecting text
Select a line of text: Move the cursor
toward a line of text you want to select.
Select a column of text: Put the cursor between the lines, move toward a column of text and
draw a rectangle over it.
Select a word: Double-click the word you want to select.
Select multiple paragraphs through pages: Click at the start of the selection, scroll to the end
of the selection without releasing your mouse.
Select all the text: Press Ctrl + A, or select some text, right-click it and then choose Select All.
Deselect all the text: click anywhere outside the text selected.
Copying text
Once you have selected the text, do one of the following:
Right-click the selected text > choose Copy.
Press shortcut key Ctrl + C.
Pasting Text
To paste the selected text on Clipboard to another application, please follow the paste command
of the specific application.
Copying Images
56
You can copy and paste individual images from a PDF to the clipboard, to other applications, or
to other files.
Taking a Snapshot of an Image
To copy an image, please switch to the SnapShot tool
.
Choose Home > Snapshot tool in Tools ribbon, and the pointer changes into a Cross
automatically.
Hold the pointer over the image and drag a rectangle around it.
You will be prompted that the selected area has been copied to the clipboard.
(Optional) Right-click the selected area, and then choose Copy Selected Graphic.
Paste the selected image to other applications.
Taking a Snapshot of a Page
You can use the snapshot tool
as an image.


to copy the entire page. Both text and images will be copied
Select the SnapShot tool by choosing Home > SnapShot.
Drag on the page to select content, right-click anywhere in the page and choose “Select All”
to copy the entire page.
To deselect it, click anywhere on the page.



You will be prompted that the selected area has been copied to the clipboard.
(Optional) Right-click the selected area, and then choose Copy Selected Graphic.
Paste the selected image to other applications.
Note: The selected area will be highlighted in blue.
Copying a Combination of Text and Images as an Image
You can use the snapshot tool to copy all selected content (text, images, or both) to the
clipboard or other applications. Text and images will be copied as an image.
To copy a combination of text and images as an image, do the following:
Select the Snapshot tool by choosing Home > SnapShot.
Drag a rectangle around the text and images.
You will be prompted that the selected area has been copied to the clipboard.
(Optional) Right-click the selected area, and then choose Copy Selected Graphic.
Paste the selected image to other applications.
57
Working with Layers
About PDF Layers
A layer or as it is more formally known Optional Content Groups (OCG) is a dictionary
representing a collection of graphics that can be made visible or invisible dynamically by users of
viewer applications. In a PDF file, each layer may hold any portion of the document's objects, and
layers may be made visible or invisible, showing or hiding their contained objects, in any
combination.
With Foxit Reader, you can control the display of PDF layers with the Layer panel. For example,
you may divide background imagery, main content areas, and advertisements amongst their own
top-level layers, and easily hide the layers that you don't want others to view.
Show or Hide PDF Layers
In a PDF, information can be stored on different layers. To show or hide related content stored in
a variable number of separate layers, you can simply refer to the Layer panel on the left side of
the work area. Please note that you cannot create or edit layers in Foxit Reader; however, you
can view layers and choose to show or hide the content associated with each layer.
A
B
Layer Panel
A. A checkmark indicates a displayed layer
B. Hidden layer
1. Open the Layer panel, and then do one of the following:

To hide a layer, uncheck the layer.

To show a hidden layer, click the empty box and a checkmark will appear.
2. From
at the top right corner of the Layer panel, choose one of the following:

List Layers for All Pages - Shows every layer across every page of the document.
58




List Layers for Visible Pages - Shows layers only on the currently visible pages.
Reset to Initial Visibility - Resets layers to their default state.
Expand All – Expands all layers.
Collapse All - Collapses all of the current layers in the view.
Measuring the Objects
The Measure Tools enable you to measure distances and areas of objects in PDF documents. The
measure tools are especially useful when you need to know the distances or areas associated
with objects in a form or computer-aided design (CAD) drawing or when you want to measure
certain areas of a document before sending to a professional printer. The measure tools are
available to Reader users only if the PDF creator enables measuring functionality.
When you use a measure tool, the tool dialog box displays the measurements of the line
segments you draw.
Measuring the Objects
Choose Comment > Measure.
Select the Distance Tool
to measure the distance between two points. Click the first
point, move the pointer to the second point, and click again. The measurements will appear
on the page.
Select the Perimeter Tool
to measure a set of distance between multiple points. Click
the first point to start, and then click each point you want to measure. Double-click the last
point to end measuring.
Select the Area Tool
to measure the area within the line segments that you draw. Click
the first point to start, and then click each point you want to measure. After you have
clicked at least two points, click the first point or double-click the last point to complete the
area measurement.
Note: You can also choose to complete or cancel measurement by right-clicking and choosing
options from the context menu.
Upon measurement, the Format menu will be called out. You can set parameters related to the
measurement tool under this menu.
59
To change the scale ratio (such as 1:2) on the drawing areas, specify the appropriate
numbers in Scale Ratio ribbon. If necessary, change the unit of measurement next to this
ratio.
By default, the measurement result information, measurement markup and rulers will be
shown in Foxit Reader. To hide the information, please uncheck relevant option(s) under
Setting ribbon.
 Show result information: shows the measurement results (including current measurement,
delta values and scale ratio) on a small panel in Foxit Reader.
 Measurement markup: shows the line you draw as a comment. You can put the pointer
over the measurement with the Hand tool selected so that you can view the measurement
and annotation you have drawn. If you uncheck this option, the measurement line you
drew will disappear when you measure another object or select another tool.
 Rulers: shows the rulers on the page.
Annotation: By default, Foxit Reader will show the name of measurement tool as the
annotation in the popup note. To change the annotation, please input the desired text in
the Annotation box.
Working on the Measurement Object
After you complete the measurement, you are able to do further operations on it, such as move,
resize, flip, and even work on it the way you work on comments.
Moving the Measurement Object
With the Hand Tool
or Annotation Selection Tool
selected, click the
measurement object you want to move.
Place the cursor over the object when the pointer changes into
mouse to move it to the intended place.
, hold and drag the
Changing the Length and Orientation of the Line Segment
With the Hand Tool
resize corners
or Annotation Selection Tool
, you will see the pointer change into
selected, select one of the
.
Hold and drag the mouse to change the length and orientation of the line segment.
Flipping the Measurement and Annotation
You can reverse measurement and annotation of the object you draw.
60
Before flipping
After flipping
To flip the measurement and annotation of the object, do the following:
Select the Hand Tool
or Annotation Selection Tool
.
Right-click the object you draw > select Flip.
Working on Measurement Objects as Comments
The measurement objects can also be used as comments, as a result of which, you can not only
set status, open popup note, delete, reply to the objects, but you can also set properties, and set
current properties as default for them.
Note: To show measurement markup and the measurement, right-click on the object you draw,
and choose Properties > Appearance > select “Show text in line”.
For the information of how to work on the objects as comments, please refer to the
corresponding section of “Chapter 5 – Comments”.
Switching between Basic Tools
The Foxit Reader Basic Toolbar consists of the Search Tool, Hand Tool, Select Text Tool, Snapshot
Tool, Typewriter Tool, etc. You can switch between these basic modes by choosing commands on
the Menu Bar or clicking the individual icons on Toolbar. Only one mode can be chosen each
time, and they cannot be obtained simultaneously.
Using Rulers & Guides
Foxit Reader provides horizontal and vertical ruler guides to help you align and position text,
graphics or other objects on the page. They can also be used to check their size and the margins
in your documents.
61
Rulers & Guides
A. Rulers B. Guides
Displaying Rulers
Please choose View > check Rulers.
Hiding Rulers
Please choose View > uncheck Rulers, or right-click the horizontal ruler or the vertical ruler and
then choose Hide Rulers.
Creating Ruler Guides
Do one of the following:


Drag down from the horizontal ruler to create a horizontal guide, or drag to the right of the
vertical ruler to create a vertical guide.
Double-click a location on the horizontal ruler to create a vertical guide, or double-click a
location on the vertical ruler to create a horizontal guide.
Moving Ruler Guides
Click and hold the guide, and then drag it to a new location.
62
Changing Unit of Measurement
Right-click the horizontal ruler or the vertical ruler, and select a measurement system for the
rulers.
Deleting Ruler Guides



To delete a guide, click the guide to select it, and then press the Delete key.
To delete all guides on a certain page, scroll to the page, right-click in the ruler area and
choose Clear Guides on Page.
To delete all guides, right-click in the ruler area and choose Clear All Guides.
Undoing and Redoing
Foxit Reader provides chances for you to undo and redo previous actions. The features allow you
to easily correct mistakes by cancelling the last actions and quickly add back in changes made
with Undo. You can undo and redo any editing you have done in the PDF documents, such as
commenting, advanced editing on PDFs and so on.
Note: You cannot undo or redo actions of bookmarks editing.
To undo previous actions, do one of the following:

Select the Undo button
on the Tool bar.

Press shortcut key Ctrl + Z.
To redo previous actions, do one of the following:

Select the Redo button

Press shortcut key Ctrl + Y.
on the Tool bar.
Sharing Documents
E-mailing Documents
E-mailing documents is a useful feature. You may need to send a PDF file you are reading to the
customers to speed up your daily work, or an interesting story that you want to recommend to
your friends.
To e-mail a PDF file, please do the followings:
63
Choose Share > Send to > Email, and Foxit Reader will pop up a dialog to ask you whether to
save the changes of document before sending, click Yes/No accordingly.
System default e-mail application runs.
The PDF will be attached in the e-mail automatically.
Type the subject and e-mail address > click Send.
Preview in the Outlook
Foxit Reader enables you to preview a PDF attachment in Outlook. When an e-mail in Outlook
has a PDF document, it will be displayed in the e-mail pane.
Sending Documents to Evernote
Directly send current PDF document to Evernote as an attachment.
 Prerequisites – You should set up an Evernote account
https://www.evernote.com/Registration.action.
 Download and install – http://evernote.com/evernote/?file=Win&btn=grey.
 Open a PDF file.

Choose Share > Send To > Evernote

You will see the current PDF document is attached to your Evernote ready.
from
.
64
Sharing PDF on Facebook
For Facebook® users, Foxit Reader provides integration to your social networks. Foxit Reader
users can login to their accounts, select text (paragraph) from a PDF document, and share it as
Facebook status. Users can also take a snapshot of a region of a document and share it as a
picture on Facebook. Also, users can share their current document, or select a document from
Windows Explorer®, and share the document using Foxit’s OnDemand CM file sharing capability
as a link from their Facebook accounts. Social network integration is delivered as a Foxit Reader
plug-in.
To share PDFs content/image on Facebook, please do the followings:
Click the Facebook button
Use the Select Text tool
to open the Share File pane.
to select the text content that you want to share on Facebook
or use the SnapShot tool to select the target sharing area as an image.
Move the cursor to the selected area and click the right button. Choose Share the Selected
Text/Share the Selected Image.
You can preview the content/image on the Share File pane. If it is an image, click the
previewing image to open it with Picture Viewer.
Click Share to open the login page of Facebook and login to your account.
The content/image will show on your Facebook.
To share a PDF file on Facebook, please do the followings:
Click the Facebook button
On the Share File pane, click
to open the Share File pane.
on the upper right corner, select Share File and then click
Add File to open the PDFs you want to share.
Click Share to open the login page of Facebook and login to your account.
The PDFs link created by Foxit’s OnDemand CM will show on your Facebook.
SharePoint Integration
Foxit Reader supports to open/save as PDF files in a SharePoint repository, whether the
SharePoint repository is SharePoint online or SharePoint on-premise. Moreover, on any website
of SharePoint on-premise you can directly check out and check in PDF files seamlessly after
configuring your server.
To check out and check in PDF files seamlessly on a website of SharePoint on-premise, please
double click the attached SharePoint Configuration
to configure your server first. Then
65
you can login to the SharePoint Server, select document library and choose to check out and
open PDF files.
Open PDF files in a SharePoint repository
To open PDF files in a SharePoint repository, please do the following: (Take opening PDFs in a
SharePoint repository on SharePoint online for example)

Run Foxit Reader and choose File > Open > Add a place
> SharePoint
. In the Add
dialog box, type the SharePoint URL to sign in and click Next to continue.

In the pop-up dialog box enter the email address and the password to sign in.

In the Open dialog box, select the Shared Documents folder and click Open.
66


Choose the PDF file you want to open and click Open.
In the Foxit Reader dialog box, if you choose Check out and Open, other users cannot edit
the PDF at the same time; if you only choose Open, others are able to modify the PDF as
well when you are editing.
67

(Optional) If you want to cancel the Check out status, please go to Share > SharePoint
Integration > Discard Check Out


.
Edit the PDF according to your requirements.
To set the PDF properties, please do as the following steps:
1. Please go to Share > SharePoint Integration > Prepare Document Properties
.
2. In the Document Properties dialogue, double-click the column name to edit the value in
the Edit text box. For example, double-click Title, the Edit text box will pop up, type the
content you want and click OK to finish the editing.
68

Go to SharePoint > Check In.
In the Check In dialogue box, select a version number for the modified document along with
the appropriate the version comments. To not allow other people to modify the document,
you can check Keep the document checked out after check in this version.

Click OK, the modified PDF will be loaded to the server automatically.
Save as PDF files to a SharePoint repository
To save as PDF files to a SharePoint repository, please do the following: (Take saving as PDFs to a
SharePoint repository on SharePoint online for example)


Choose File > Save As > Add a place
> SharePoint
the SharePoint URL to sign in and click Next to continue.
. In the Add dialog box, type
In the pop-up dialog box enter the email address and the password to sign in.
69

In the Save As dialog box, select the Shared Documents folder and click Save.
Creating PDFs
Creating PDF is easy to use with Foxit Reader. Users can easily and quickly create PDFs from
Microsoft® Word®, PowerPoint®, and Excel® through the Foxit Reader plug-in or export existing
PDF file to text with one click. Just follow the steps below, and you can easily experience this new
feature to the utmost.
Creating from File
Choose Home > Create > From File tool
.
70
Navigate to and select the file to be created and choose Open.
Type a filename and specify a location in pop-up Save dialog box.
(Alternatively) You can simply drag the file to be created to Foxit Reader, or right-click the file
and choose Convert to PDF in Foxit Reader.
Creating from Scanner
Foxit Reader allows user to create PDFs from scanner with just one click.
Choose Home > Create > From Scanner > Quick Scan > choose the scanner.
A dialog box will pop up upon completion. You can click Yes to continue scanning, or click No
to complete scanning.
Choose File > Save, and select a name and location for the PDF file.
Note: By Quick Scan, PDFs will be created by default settings. To customize scan settings, please
follow the steps below:
Choose Home > Create > From Scanner > Custom Scan.
1. Scanner: select an installed scanner. You must have the manufacturer’s scanning software
installed on your computer.
71
 Scanner Options (Windows only): click to open the Scanner Options dialog box. (Available
only after you select a scanner.)
 User Interface: the hide scanner’s interface option bypasses the windows and dialog
boxes provided by the scanner manufacturer. Instead, scanning from Foxit opens the
Foxit Scanner dialog box.
 Paper Size: the menu lists available standard page sizes.
2. Input
 Sides: choose single-sided or double-sided scanning.
 Color Mode (Windows only): select a basic color mode (Color, Black and White, or Grayscale)
supported by your scanner. This option is enabled if your Scanner Options are set to use the
Foxit scanning dialog box instead of the scanner application.
 Resolution (Windows only): select a resolution supported by your scanner. This option is
enabled if your Scanner Options are set to use the Foxit scanning dialog box instead of the
scanner application.
Note: If you select a Color Mode or Resolution option not supported by your scanner, a message
appears and your scanner’s application window opens, where you can select different options.
 Paper: select a paper size or specify a custom width and height.
3. Output
 New PDF Document: select this to create a new PDF; deselect it if you want to append the
scanned page to an existing PDF.
 Append: select this if you want to add the converted scan to an existing PDF. Click Browse to
find and select another PDF.
Choose Configure Presets to configure the presets of scanning. See also “Choose Custom Scan to
customize the scan settings”.
Creating Blank PDF
•
•
•
•
•
Choose Home and click Blank tool
in the Create ribbon, and a blank PDF will be
created.
Choose Home > Tools > Typewriter.
Double click the blank page to start typing the text you want to add to the blank page.
As needed, select other tools and options that you want to apply to the PDF.
Choose File > Save, and select a name and location for the PDF file.
72
Creating from Clipboard
You can create a PDF directly from your clipboard.
Choose Home and click From Clipboard tool
in the Create ribbon, and a PDF with
contents from clipboard will be created.
Signing PDFs
Signing PDFs on DocuSign®
Foxit Reader allows users to easily send, sign and save PDF documents and forms using the
industry's most widely used eSignature solution.
Signing a PDF File
Sign a PDF on DocuSign, please refer to the following steps:
Choose Protect > Signature > DocuSign
.
Choose Login to DocuSign. Type your Email account and password of DocuSign and click login.
If you do not have an account, please sign up first.
Click the button
and choose Sign with DocuSign. The application will upload your PDF
to DocuSign and you will enter into the DocuSign user interface.
 Signing the Document
73
1. Sign directly

Click
on the right of DocuSign Interface.

Choose a template you prefer and click on the document where you want to put
the signature.
Note:
1. You should visit the DocuSign website if you want to change the signature template.
See Changing signature template for details.
2. On the drop-down menu of Sign tool
, you can choose to sign document
with your initial, name (first name or last name), company, title or email address.
Signing the document with the date signed or with a checkbox is also available, as
shown below:
2. Sign on paper :
If you want to sign on paper, please click More Options on the left side and select Sign
on Paper. A Sign on Paper dialog box will pop up.
74
3. Sign Later
If you do not want to sign the document right now, you can click
drop-down menu of Options.
on the
 Changing signature template


Visit the DocuSign website (www.docusign.net) first.
Click Edit beside Your Identity under Home menu.

Click Edit in Manage Identity to open Mange Signatures window.

In the Manage Signatures windows, click Edit to change the signature template.
75




Select Style: select a style as your signature template.
Draw: draw a signature template using your input device.
Upload: you can upload an image as your signature template.
Click Adopt to complete the setting.
 More Options
On DocuSign user interface, click More Options, you can view history, certificate, choose to
sign on paper or finish later, as shown below:
76
 Drag the button
can zoom in/out the file.
 Click the page number listed on the right to jump to the target page you want to place the
signature.
 Click the signature button
to open the signature pane. Choose the signature
template and drag it to the desired location. You can place several templates at the same
time.
 Click the button
at the top right corner of the textbox to delete the signature.
 Click Finish to complete signing. You can preview the signed PDF.
 Select the download button
or printing button
to get the PDF with signature.
 Select the DocuSign button
and choose Logout from DocuSign.
Sending a PDF via DocuSign

Open a PDF you want to send with Reader.
77

Click DocuSign button
and choose Send via DocuSign.

Login to the website.
Choose the signature template from the left signature list and drag it to the location where
you want the recipients to sign.

Select the signature and click

Edit the signature with the tools on the toolbar.

Click the button

Click the button

Click Send to send the PDF.

to set the signature properties.
to add the recipients address.
to edit the email subject line and content.
PDF Sign
PDF Sign enables you to create your self-signed signatures and add the signature to the page
directly. You don’t need to create different signatures for different roles or other complicated
settings.
To create your own handwriting signature and sign a PDF, follow these steps.
1. Choose Protect > Signature > PDF Sign > Create Signature.
2. In the Create Signature dialog box, you can choose to draw signature, import an image from
local disk or from clipboard to create a signature.
3.
4.
5.
(Optional) If you choose Draw Signature, click Draw to draw your signature in Draw
Signature box, and click OK.
If you choose Import Image, then click Browse. And choose the image and click Open. You
can preview the image in the Preview tab.
(Optional) Check “Require password to use the signature”, input password and confirm the
password.
Tip: You can sign your signature on a clean white sheet of paper using a black pen, scan it to an
78
image file. To create the best signature you had better scan your signature in monochrome at 600
DPI.
6.
7.
8.
You can set your name as your signature. Then click Save. The cursor will be changed into a
rectangle.
Put the cursor to the place you want to sign. You can resize it by clicking it and dragging the
handle. You can also move it by dragging it to other places. To remove it, select the signature
and press Delete.
To apply the signature to the document, double-click the signature or right-click the
signature and select Apply signature. Select Place on Multiple Pages, and then you can
specify the page(s) you want to place.
Note:
1. Once applied, the signature can no longer be edited or deleted.
2. If you want to apply an encrypted signature, you will be required to input the password first.
To manage the signature, do the following:
Choose Protect > Signature > PDF Sign > Manage Signature. In the Manage Signature dialog box,
click Create to create a signature. Select a signature you created, click Edit and you can change
your signature. You can preview the signature after you edit it. To delete a signature, select the
signature and click Delete.
Verifying Digital Signature
Foxit Reader adds the new signature verification feature to keep PDFs information from any
exploits and falsification by checking the validity of the signature, greatly improving the
document authenticity and integrity. The support to MDP Verification will be coming soon.
79
To verify the digital signature’s efficiency of PDFs, please do one of the following:

1. Go to Protect > Validate
.
2. Check the pop-up message box. It will show the efficiency of the
Signature.

1. Right click the signature and select the Validate Signature or the Signature Properties.
2. Check the pop-up message box or the Validity Summary in the Signature Properties
dialogue box.

1. Double-click the signature
2. Check the pop-up message box showing the Signature Status.
Stamping PDFs
The Stamp Tools in Foxit Reader are a group of advanced tools that enable you to stamp content
and watermarks into a PDF document. Foxit Reader supports image stamps with various image
formats (JPEG, GIF, BMP, WMF, etc.) and PDF file stamps. You can either create dynamic stamps
which can obtain information from your system including name, date and time, or import existing
dynamic stamps. Stamping PDF files is a very useful feature especially when you need to give
reviewers some advices about the document's status or sensitivity.
80
Standard Stamp
Dynamic Stamp
Create a Custom Stamp
Create a Custom Dynamic
stamp
Stamping a PDF
You can choose from a list of predefined stamps, or create custom stamps before stamping a PDF.
All the stamps that you import or create are listed in the menu of Stamp Tools and Stamps Palette.
To apply a stamp, please do the following:
1.
2.
3.
Choose Comment > Stamps.
In the Stamps Palette, select a stamp.
Click the document page where you want to place the stamp.
Note: All the stamps that you import or customize will be listed in the menu of Stamp Tools, you
can choose directly a stamp from the menu of Stamp Tools.
Creating a Stamp
You can create custom stamps and dynamic stamps.
Creating a Custom Stamp
1.
Choose Comment > Stamps > Create
> Create Custom Stamp.
2.
Type a new category name or choose a category from drop-down menu, name the stamp,
and then click OK.
81
Note: If the stamp you choose is an image file, you can adjust the opacity of the image via
dragging the scrollbar as needed in the Create Custom Stamp dialog box.
Create Custom Stamp Dialog Box
Creating a Custom Dynamic Stamp
You can create a Custom Dynamic Stamp to add text, author name and date time on stamps.
Please do the following:
1.
Choose Comment > Stamp > Create
2.
In the Create Custom Dynamic Stamp dialog box, choose one stamp template from the left
list or create your own stamp template which can be an image or a PDF file. Choose a
category from drop-down menu or name a new one, then name the stamp.
Specify Font and Font Color.
From the Stamp Text option, if you choose <author name>, <date time> or< author name
and date time> category without typing any text, it will automatically obtain current user,
date, time from your system when you click Apply button.
You can instantly adjust the added content to fit your needs when you preview current
stamp on the right top preview pane.
Click OK.
3.
4.
5.
6.
> Create Custom Dynamic Stamp.
82
Create Custom Dynamic Stamp Dialog Box
Creating an Image on Clipboard as Stamp
To create an image on clipboard as stamp, please do the following:
Choose Comment > Stamps > Create > Paste Clipboard Image as Stamp Tool.
Managing a Stamp
To manage a stamp, please do the following:




Choose Comment > Stamp > Create
> Manage Stamps to open Manage Custom Stamps
dialog box, and select a stamp.
Click Create and choose a way of creating stamp from drop-down menu, please refer to
Creating a custom stamp.
Click Edit to edit the stamps, such as changing category, stamp name, or replacing the image
or PDF files etc. Please refer to Creating a custom dynamic stamp.
Click Delete to remove the stamp.
83
Manage Custom Stamps Dialog Box
Note: Deleting a custom stamp category will delete all stamps that are subordinate to it.
Cutting/Copying and Pasting a Stamp
To cut/copy and paste a stamp, please do the following:



Select the stamp you want to cut or copy.
Right-click the stamp > Cut/Copy.
Right-click on the page you want to past the stamp and select Paste.
Undoing/Redoing a Stamp
To undo/redo a Stamp, please click Undo
or Redo
on the Quick Access Toolbar.
Resizing or Moving a Stamp




Select the Hand Tool
or the Annotation Selection Tool
.
To resize a stamp, select it, put the cursor on one of the red points, and drag one of the
handles to make your adjustments.
To move a stamp, select it and put the cursor on one of the segments to drag.
To add a pop-up note to a stamp, select it and double-click the stamp or right-click it and
choose Open Popup Note.
Deleting a Stamp
Do one of the following:

Select the Hand Tool
or the Annotation Selection Tool
, and then press the Delete
key.
84

Select the Hand Tool
or the Annotation Selection Tool
, right-click on the stamp,
and choose Delete from the Context Menu.
Setting Favorite Stamps



Choose Comment > Stamps > Create > Set Favorite Stamps.
Select a stamp in All Stamps panel, and then click Add to Favorite, then the stamp you select
will be added to Favorite Stamps panel.
To remove a stamp from Favorite Stamps panel, select the stamp you want to remove and
then click Remove from Favorite.
Set Favorite Stamps
Managing Security
Trust Manager
Security Trust Manager is added in the Foxit Reader, which enables users to allow or deny
unauthorized actions and data transmission. This includes URL connection, attachments, PDF
actions, and JavaScript functions; these all efficiently avoid the attack from malicious content and
viruses.
To activate Safe Reading Mode, do the followings:


Select File > Preferences > Trust Manager, and check the option “Enable Safe Reading
Mode”.
Click OK.
85
Note:
1. If you want to run the program, please uncheck the option “Enable Safe Reading Mode”. And
click “Yes” in the pop-up message box when running the operation.
2. If you want to turn off the link warning permanently, please disable Safe Reading Mode by
unchecking Enable Safe Reading Mode.
3. If you attempt to open an attachment in PDF in Safe Reading Mode, Foxit Reader will prompt
you to disable Safe Reading Mode in Preferences under File Menu.
On-line Whitelist Management
Foxit Reader allows users to add trusted URLs when submitting forms online to better manage
the file access.
To set on-line whitelist, please follow the steps below:
Choose File > Preferences > Trust Manger > click Change Settings at the bottom of Trust Manager
dialog box, then Manage Sites dialog box will pop up as shown below:
86
PDF files may connect to web sites to share or get information.
Custom setting: You can customize the URLs you trust to enable PDF files submission.



Select Custom Setting.
Input the host name of a website under the Host Name field.
Click Allow and then click OK.
Allow PDF files to access all web sites: Select it to allow the submission of PDF files to all web
site.
Block PDF files’ access to all web sites: Select it to prevent the submission of PDF files to all
web sites.
Web Sites
Under the Web Sites, you can delete URLs you trusted before.
Select a web site in the column, click Delete, and the selected URL will be deleted.
Default behavior for web sites that are not in the above list:
Always ask: Foxit Reader will always pop up a window saying: “If you trust the site, click Yes,
otherwise click No" when you try to submit forms to the websites not listed in the trusted
websites. This is selected by default.
Allow access: Submission of forms to all websites will be available if it is selected.
Block access: Submission of forms to all websites will be blocked if it is selected.
Run Script Right Control
Foxit Reader allows users to set the rights to run script accordingly so as to conveniently execute
files and secure PDF files at the same time. There are four levels for users to choose: Disable
JavaScript, Enable secured JavaScript, Enable JavaScript secured and verified by DRM, and Enable
all JavaScript.
To set the run script rights, please follow the steps below:
Choose File > Preferences >Trust Manager, and then set the rights as required:
To enable all JavaScript: Check Enable JavaScript Actions and uncheck Enable Safe Reading
Mode.
To disable all JavaScript: Uncheck Enable JavaScript Actions and check Enable Safe Reading
Mode.
To enable secured JavaScript: Check Enable JavaScript Actions and Enable Safe Reading
Mode.
To enable JavaScript verified by DRM:
87


Check Enable JavaScript Actions and Disable Safe Reading Mode for Trusted
Documents.
Click Advanced Preferences below to check both RMS Encryption and Digital Signature
Verification.
AD RMS Protection (Available in Enterprise Version Only)
Foxit Reader integrates RMS Plugin in the software to extend the access control of Microsoft
Windows Server® AD RMS on clients’ systems. The Desktop Version only allows users to open
PDF files protected by AD RMS Protector, while the Enterprise Version supports more. Foxit
Reader (Enterprise Version) not only supports to open the RMS protected documents, but also
allow users to protect documents by RMS Protector and decrypt RMS protected documents.
Foxit Reader (Desktop Version) allows users to open RMS protected documents, with evaluation
watermark displayed in the documents (as shown below).
For Foxit Reader (Enterprise Version), RMS requires paid license for integrated application. You
will have 30-day trial, after that, you are required to purchase RMS license for further application.
With Foxit Reader (Enterprise Version), you can view RMS protected documents without
evaluation watermarks displayed.
88
Microsoft Windows Rights Management Services is an information technology that works with
AD RMS enabled applications to help safeguard digital information from unauthorized use. Users
can restrict users to open, read, modify or redistribute certain information. Foxit Enterprise
Reader RMS protector provides seamless integration with Microsoft Windows Server
environment to protect PDF documents and manage policy templates. With Foxit Enterprise
Reader, you can open an RMS-Protected document if you are authorized, to improve information
security, meet compliance requirements, and save time and money with improved business
processes. To meet more users’ need, Foxit Enterprise Reader is also compliant with Microsoft®
AD RMS 2.1.
Once installed, Foxit Enterprise Reader will extend all Microsoft AD RMS service to all PDF files.
How to Use Windows Azure AD Right Management (AAD RMS)
As for using Windows Azure AD Right Management (AAD RMS), please follow the steps below:
1. Enable Windows Azure AD Rights Management for your organization:




Download the Windows Azure AD Rights Management administration module
(WindowsAzureADRightsManagementAdministration.exe) for Windows PowerShell
from here.
In the local folder where you downloaded and saved the Rights Management
installer file, double-click the file
WindowsAzureADRightsManagementAdministration.exe to launch installation of
the Rights Management administration module.
Open Windows PowerShell.
Type the following commands:




Import-Module AADRM
Connect-AadrmService -Verbose
Enter
your
Office
365
credentials
example“[email protected]”.
Type the following commands:


when
prompted,
for
Enable-Aadrm
Disconnect-AadrmService
2. Install Active Directory Rights Management Service Client 2.1:
X86 Download
X64 Download
89
RMS Setting
Go to File > Preference > RMS Setting



Save the encrypted file as a copy named ‘filename(protected).pdf’: Save the encrypted file
as a copy which will be named as ‘filename (protected).pdf’ after encrypting a file with RMS
feature.
Encrypt metadata: Check it to encrypt metadata when encrypting PDF documents.
Use deprecated encryption algorithms to be compatible with the previous version: If
checked, PDFs encrypted by RMS can be opened with Foxit Reader 5.0, Foxit PhantomPDF
5.0 and later versions; if not checked, PDFs encrypted by RMS can be opened with Foxit
Reader 5.4, Foxit PhantomPDF 5.5 and later versions.
RMS Encryption
1. Go to Protect > AD RMS Protect > Restricted Access.
2. Choose the template you want. If you have more than one server, please firstly move the
cursor to the name of the server, and then the templates on this server will be shown on the
submenu. Click Refresh Templates to get the latest official templates from the server. You also can
create custom templates. For more detailed information, please refer to Template Creation.
90
3. If you do not want to use the template, please click Restricted Access.

Type your account name and password when you login to the RMS server for the first time.

Click the icon
to add the users who you want to authorize the reading
permission. To authorize anyone to read this file, select the icon
on the right side.
(If you have an Outlook Email Client, the contact list of Outlook will pop up when you click
the icon
. You can choose the email address directly. Alternatively, you can also just
type certain letters included in the email address, and then click icon
, the system will
help you enter the complete address according to the contact list. Then you can go to the
More Option Step.)
91

Choose the object types (users or group) and the server. Then type the e-mail addresses of
the authorized users into the text box or click Advanced to open the e-mail address list on
the server to choose an address directly.
92


Click OK to exit Select Users or Groups dialog.
Click More Options in Permission Dialog. The users you selected now will be shown on the
text box. You can add or delete users as needed.
Additional permissions for users:
This document expires on: check it to set the expiration date. The document cannot be
opened after the specified date.
Print Content: check this option to allow the users above to print the PDF files.
93
Allow users with read access to copy content: enable the users who only have read
permission to copy content.
Access content programmatically: enable users to run the JavaScript in the document.
Additional settings:
User can request additional permissions from: if users want to apply for any permission, the
application will open the email client and list the email address you typed into the text in the
Recipient's Address automatically. You can type a URL as well.
Require a connection to verify a user’s permission: check this option to let users verify their
license every time they open the encrypted file.
Security Watermark: add a security watermark to the PDF files. For the detailed instructions,
please refer to Security Watermark Management.
Set Default: set the additional settings as default.
Save as template: the security setting set above can be saved as a template for further use.
94
4. If users need to request additional permissions for a PDF file, please do the following:


Open the file and choose FILE > Properties. In the Document Properties dialog box, click
Security tab.
At the bottom of Security tab, click Request additional permissions ….
Template Creation and Editing
To create a custom template, please see the following steps:
1. Choose Protect > Settings > Template Management.
2. Click Create. If you want to edit the existed template, please select the template and click Edit.
3. Click Add in the Create Rights Policy Template dialog box.
95
4. Choose the language and edit template name and description. Click OK. The template name
and description will be shown in the Template Identification list. You can type the name and
description with different languages for the template you want to create via clicking Add.
5. Click Next to add user rights. Click Add in Add Users and Rights.
6. In the pop-up Add User or Group dialog box, choose “The e-mail addresses of users or groups”,
click browse to simply add a user who would like to assign the rights. Selecting Anyone allows
every user to work with the encrypted PDF files. You can type multiple e-mail addresses as well.
96
7. Check PDF permissions for the above users. You can set the permissions for all of the users or
set different permissions for different users.
8. User can request additional permissions from: if users want to apply for any permission, the
application will launch the email client and list the email addresses you typed into the text in the
Recipient's Address automatically. You can type a URL as well.
9. Click Next to specify the expiration policy.
Content expiration
Never expires: the PDF content can be viewed indefinitely.
Expires on the following date: the PDF content will expire on a given date.
Expires after the following duration (days): the PDF content will expire after the desired days
selected.
Use license expiration
97
Requires user to re-verify permissions with the server after the following duration (days):users
need to apply for a new license to open the encrypted PDFs several days (the number you type
into) later.
10. Click Next to add security watermark. You can refer to the Security Watermark.
11. Click Finish to complete creating the template.
Security Watermark Management
1. Creating Profile
Before adding a watermark, you should create a profile first. The application will apply all of the
watermarks in the profile to a PDF.
Note: you can only choose a profile but not a certain watermark to use. Please create the
watermarks you want to add to one PDF in the same profile.
Choose Protect > AD RMS Protect > Settings > Security Watermark Management.
Click New Profile to create a profile and name it.
98
2. Adding Watermark
To add a new watermark, please do the followings:
Open the Security Watermark Management and select a profile you created and click Add to
add watermarks in the profile.
Type the watermark’s name.
Type the watermark’s content in the text box and set the font, size, color, underline, and
alignment.
Note: you can only set text as watermark.
Choose “Select dynamic variable” in the drop-down menu of Dynamic text. When any PDF
reader opens the file, the watermark will show the current document information
dynamically and you can use multiple texts at the same time.
Content ID: shows the content ID of the current document.
Document Title: show the current document title.
Author: show the author of the current document.
Current User: show the current user who is reading the document.
Date: show the current system date when opening the document.
Day: show the current system day when opening the document.
Month: show the current system month when opening the document.
Year: show the current system year when opening the document.
Time: show the current system time when opening the document.
Hour: show the current system hours when opening the document.
Minute: show the current system minutes when opening the document.
Second: show the current system seconds when opening the document.
Set the appearance by choosing the rotation degree and the opacity. You also have the
option to make the scale relative to target page.
Set the vertical and horizontal distance between the target page and the watermark.
99
Choose the page range to display the watermark. You can choose to display the watermark
for all pages in range, even pages only or odd pages only in the subset list.
Preview the watermark in the right pane.
Click OK to finish it.
3. Editing or Deleting Watermark
Editing a Watermark
Open the Security Watermark Management and select a watermark you want to edit.
Click Edit to open the Edit Security Watermark dialog box.
Begin editing the watermark, please refer to “Adding Watermark”.
Click OK to finish the operation.
Deleting a Watermark
Open the Security Watermark Management and select a watermark you want to delete.
Click Delete to remove the selected watermark.
4. Importing or Exporting Watermark
Importing a Watermark
Open the Security Watermark Management and click Import.
Choose a watermark with .xml format.
Click Open.
Exporting a Watermark
Open the Security Watermark Management and select a watermark you want to export.
Click Export and choose a file type and location to save.
The watermark will be exported as an .xml file or encoded file according to your choice. It
can be integrated into AD RMS policy template and applied to the PDF files by Foxit
Reader(Enterprise Version).
100
Note:
1. If you want to integrate the watermark to a common policy template, please export it as
an .xml file and add it to the template by Foxit Reader (Enterprise Version) directly.
2. If you want to integrate the watermark to an official policy template, please export it as
an encoded file (.txt format) and integrate it into the template by AD RMS Scripting API
Architecture. Then you can import the template and apply it to PDFs by Foxit Reader
(Enterprise Version). (Please click here to see the example and use the value of
“appData.Name” and “appData.Value” in the exported encoded file.)
Auditing Logs
Foxit Reader (Enterprise Version) enables you to track on the usage of RMS protected files to
record the actions on the files during workflow and save to SQL server, including who accessed
the document, what document was accessed, when it was accessed, how it was accessed and the
success of that access, and more.
To
audit
logs
you
should
first
download
a
configuration
tool
from
http://cdn04.foxitsoftware.com/pub/foxit/rms/configtool/RMSConfigTool110.exe. Run the tool and
do the following:
1. In the Config Tool dialog box, choose Foxit Reader, and check Audit Log Setting function.
2. Follow the codes below to create the database table on the server.
USE [Database]
GO
/****** Object: Table [dbo].[Table_Name] ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Table_Name](
[User] [nvarchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Action] [nvarchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[FileName] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
101
[DateTime] [datetime] NOT NULL,
[PrinterName] [nvarchar](max) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Copies] [numeric](18, 0) NULL,
[Result] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
3. Enter all SQL Server information shown as below, including SQL Server Name, the name of
Database and Table, User Name and Password. Then click on Test Connection button to test if the
connection works well. A message box will pop up to tell you if the test connection is successful.
4. Click on the Export button to generate a .reg file for the administrator’s configuration.
5. The administrator can distribute the .reg file to client-end computers.
Restricting Local Printing
You can also set the printing permissions by specifying certain network printers to protect the
sensitive information from being printed arbitrarily.

Network Printers Configuration
To avoid unauthorized printing of sensitive documents, you can limit the printing permissions to
certain network printers. To configure network printers, please download the configuration tool
from http://cdn04.foxitsoftware.com/pub/foxit/rms/configtool/RMSConfigTool110.exe, run the
tool and in the “ConfigTool” dialog box check Valid Network Printer Setting in the Config Tool
dialog box and then do the following:
102
1. You should get the Printer Port first. Please go to Start > Devices and Printers > right-click a
network printer > Printer Properties. In the printer properties dialog box, choose Ports tab and
get the information, e.g. the “IP_192.168.3.239” is the printer port.
2. Click Add button in the “ConfigTool” dialog box to add the Printer Port.
Note: About how to add a network printer, please see “Add a Network Printer”.
3. Click on Export button to generate a .reg file for the administrator’s configuration.
4. The administrator can distribute the .reg file to client-end computers.

Add a Network Printer
There are two devices to add a network printer as below:

Go to Start > Devices and Printers > Click Add a printer. In the Add Printer dialog box, click
The printer that I want isn’t listed to go to the next step.
103
Follow the instructions shown in the Add Printer dialog box as below and complete adding a
printer.

Open the Run box by pressing shortcut keys Win + R, enter the printer URL you want to add
and click OK.
104
In the pop-up dialog box, right-click the printer and choose connect on the context menu.
105
Chapter 5 – Comments
A comment is a written note intended as an explanation, an illustration, or a statement of fact or
opinion, especially a remark that expresses a personal reaction or attitude. You can type a text
message or add a line, circle, or other shape to make comments on PDFs you are reading with
Foxit Reader commenting tools. Most types of comments contain a pop-up window displaying
your name, date and time you created the comments, and a text message. You can also edit,
reply, delete, and move the comments with ease. This function is quite helpful to your studies
and work if you have to make some notes on PDF documents.
About the Annotation Tools
Annotation tools make adding annotations on PDFs possible. There are various annotation tools
with different functions for you to choose: Typewriter Tools, Drawing Markup Tools, and Text
Markup Tools. These tools that are used to add or create comments to PDF documents are placed
under Comment menu.
A
B
A: Text Markup Tools
C: Typewriter Tools
C
D
B: Note and File Comment Tool
D: Drawing Tools
Selecting Tools to Add Comments
Select Comment > select a type of tool you want to use under the toolbar.
Adding Note Comments
The most common type of comments is the note comments. A note comment has a note icon
that appears on the page and a pop-up note for text message. The message box could be resized
and will wrap when you enter much more text. Read below to learn how to add a note comment
anywhere on the page or in the document.
106
Note icon
Close button
Options menu
Text message
Resize corner
To Add a Note Comment
Choose Comment > click Note tool
in Pin ribbon.
Click where you want to place the note.
Type text in the pop-up note. You can also use the Select Text tool
to copy and paste
text from a PDF into the note, or copy the note with Ctrl + C to other applications.
Editing a Note Comment
Click the text message.
Make changes as needed.
Drag its lower right corner to resize the pop-up note.
Click and drag the title of the pop-up note to move its position.
When finished, click the title of the pop-up note, or click outside the pop-up note.
(Optional) Do one of the following to close the pop-up note. A note icon appears to the right
of the markup to indicate the presence of text in the pop-up note.
A. Click the close button in the pop-up note.
B. Double-click the markup.
C. Right-click the markup, and choose Close Popup Note.
D. Choose Close Popup Note from the Options menu of the pop-up note.
Using the Spell Checker
You are able to use the Spell Checker if the security settings allow. When you are trying to text
any message in the pop-up note, you will be prompted to download Foxit Spell Check Language
component if this package hasn’t been installed on your computer. Click Yes to download this
update.
107
To download this add-on from the Foxit Website, see also “Spell Checker”.
If you have installed Spell Checker, when you type any English text in the pop-up note, this tool
will try to find any spelling errors and highlight them with squiggly lines.
Right click on the misspelled words, and you will see a list of suggested words.
Choose one of the suggested words to correct your input or ignore the squiggly line.
If you want to disable spell check, please go to File > Preferences > Spelling > uncheck the Enable
spell check option.
Aligning and Centering Note Comments
Choose the Note Tool
, Hand Tool
or Annotation Selection Tool
.
Follow the steps specified in “Working with multiple images”.
Deleting a Note Comment
Choose the Note Tool
, Hand Tool
or Annotation Selection Tool
.
Do one of the following:
A. Click the note icon, and press the Delete key.
B. Right-click the note icon, and choose Delete from the pop-up context menu.
C. Choose Delete from the Options menu of the pop-up note.
Using the Text Markup Tools
You can use Text Markup tools to indicate which text should be edited or noticed. Text Markups
do not change the actual text in the PDF. Instead, they indicate which text should be deleted,
inserted, highlighted or underlined. Text Markup tools include Highlight Text Tool, Underline Text
Tool, Strikeout Text Tool, Squiggly Text Tool, Replace Text Tool and Insert Text Tool.
108
Text Markup Tools
Button
Tool Name
Highlight Text Tool
Description
To mark important passages of text with a fluorescent (usually)
marker as a means of memory retention or for later reference.
Underline Text Tool
To draw a line under to indicate emphasis.
Strikeout Text Tool
To draw a line to cross out text, making others know the text is
deleted.
Squiggly Text Tool
To draw a squiggly line under. Similar to Underline Tool.
Replace Text Tool
To draw a line to cross out text and provide a substitute for it.
Insert Text Tool
A proofreading symbol (^) used to indicate where something is to
be inserted in a line.
Foxit Reader offers convenience to users when they choose color and opacity for Commenting
Tools. You can set colors and opacity for each tool, and then add any Text Markups to the PDF file.
Foxit Reader will remember the color and opacity settings automatically.
Using highlight, underline, strikeout, squiggly and replace tool
1. Highlighting, underlining, striking out, squiggling or replacing text
Choose Comment > Highlight Tool
, Replace Text Tool
, Underline Tool
or Insert Text Tool
, Strikeout Tool
, Squiggly Tool
.
Click and drag from the beginning of the text you want to mark up.
2. Adding text message to highlight, underline, strikeout, or squiggly markups
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Text
Markup Tool > right-click the markup > choose Open Popup Note.
Type text in the pop-up note. You can also use the Select Text tool
to copy and paste
text from a PDF into the note, or copy the note with Ctrl + C to other applications.
(Optional) Do one of the following to close the pop-up note. A note icon appears to the
right of the markup of the markup to indicate the presence of text in the pop-up note.
A.
B.
C.
D.
Click the close button in the pop-up note.
Double-click the markup.
Right-click the markup, and choose Close Popup Note.
Choose Close Popup Note from the Options menu of the pop-up note.
3. Deleting a highlight, underline, strikeout, squiggly replaced or insert markup
Do one of the following:
109
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Text
Markup Tool > click the markup > press Delete key.
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Text
Markup Tool > right-click the markup > choose Delete from the pop-up Context Menu.
Choose Delete from the Options menu of the pop-up note.
Using the Select Text Tool
Select Text Tool enables you to add most types of text edits, including highlight, strikeout,
underline, squiggly and replacement. It has integrated the select text function with Text Markup
Tools. When you select text with the Select Text Tool, a menu of text editing options will appear
on the right click context menu. Also, you can use the Select Text Tool to add bookmarks for PDF
files.
Marking up Text with Edits

Choose Home > click the Select Text Tool
on the toolbar.

Select the text you want to mark up > right-click the selected text, and then refer to “Using
the Text Markup Tools”.
Using the Drawing Markup Tools
Drawing Markup tools help you to make annotations with drawings, shapes, and text messages.
You can use the Drawing Markup tools to mark up a document with arrows, lines, squares,
rectangles, circles, ellipses, polygons, polygon lines, clouds, etc. Drawing Markup tools provide
another kind of comment. It is quite useful when you have to make some shapes to mark the text
or image. The table below describes exactly what Drawing Markup tools do.
Drawing Markup Tools
Button
Tool Name
Description
Arrow Tool
To draw something, such as a directional symbol, that is similar to an
arrow in form or function.
Line Tool
To mark with a line.
Rectangle Tool
To draw a four-sided plane figure with four right angles.
Oval Tool
To draw an oval shape.
Polygon Tool
To draw a closed plane figure bounded by three or more line
segments.
Polyline Tool
To draw an open plan figure with three or more line segments.
110
Pencil Tool
To draw free-form shapes.
Rubber Tool
An implement, acts as a piece of rubber, used for erasing the pencil
markups.
Cloudy Tool
To draw cloudy shapes.
Area Highlight
Tool
To highlight a specified area, such as a certain text range, an image
and blank space.
Adding Drawing Markup
Consider the effect you want before selecting a drawing tool.
Choose Comment and click the drawing tool as needed in Drawing ribbon.
To draw a line, or arrow, drag across the area where you want the markup to appear.
To draw a square, rectangle, circle, or oval, drag across the area where you want the markup
to appear.
To create a polygon, polyline, or cloud shape, click to create the start point, move the
pointer, and click to create each segment. To finish drawing the shape, click the start point or
double-click to end it. For polygon line, you can end the drawing only by double-clicking.
To draw free-form lines using the Pencil Tool
, drag across the area to make any
shapes you want. You can release the mouse button, move the pointer to a new location,
and continue the drawing.
To erase parts of the pencil drawings, select the Rubber Tool
, click the pencil
drawings, and click them again when an eraser appears on the drawings.
Tips:
To draw a line that is horizontal, vertical, or at a 45 degree angle, press Shift while you draw.
To draw a square or circle with Oval Tool or Rectangle Tool, press Shift while you draw.
Double-click the markup to write the comment.
Right-click the markup or click the option on the comment box to open the properties box.
Set the properties according to your requirements.
If you draw a line or arrow, you can enable the comment to be shown on the line or arrow
by checking Show text in line in the line properties box.
111
Adding Area Highlight
Foxit Reader supports to highlight specified areas, such as a certain text rang, an image and blank
space.
To highlight an area, please select Comment > Drawing > Area Highlight tool
, and then
click and drag the mouse across the text range, image or blank space to be highlighted.
The areas will be highlighted in yellow by default. To change the highlight color, please right
click the highlighted area, select Properties, and then choose a color as needed in
Appearance tab under Highlight Properties dialog box.
112
Editing, resizing or moving the markup
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Drawing
Markup Tool.
To edit or resize the drawing markup, select it, put the cursor on one of the green points,
and drag one of the handles to make your adjustments.
To move the drawing markup, select it and put the cursor on one of the segments to drag.
To add a pop-up note to the markup, select it and double-click the markup or right-click it
and choose Open Popup Note.
Aligning and centering drawing markups
Choose the Hand Tool
or the Annotation Selection Tool
.
Follow the steps specified in “Working with multiple images”.
Deleting the Markup
Do one of the following:
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Drawing
Markup Tool > press the Delete key.
Select the Hand Tool
, Annotation Selection Tool
or the corresponding Drawing
Markup Tool > right-click the drawing markup > choose Delete from the Context Menu.
Choose Delete from the Options menu of the pop-up note.
Grouping the Markups
Grouping drawing markups enables you to combine them so that you can work with them as
though they were a single object. You can move or delete the group, set its status, change its
appearance, etc.
Select the Hand Tool



or Annotation Selection Tool
, and do one of the following:
To group the markups, select the markups you want to group by pressing Ctrl > right-click
on one of the selected markups, and choose Group.
To work with a group, select one of the markups and then work with the group as other
comments.
To ungroup the markups, select the group > right-click on it, and choose Ungroup.
113
Using the Typewriter Tools
The Typewriter Tools include Typewriter Tool, Callout Tool, and Text Box Tool.
Using the Typewriter Tool
Typewriter Tool acts as a machine to produce text on PDFs by manually pressing keys
consecutively on a keyboard. You can use the Typewriter Tool to add comments anywhere on a
PDF, which doesn’t appear as annotations.
Note: The Typewriter Tool can be used to fill forms.
See also “Filling non-interactive forms”.
Typewriter comment
Adding Comments with Typewriter
Choose Comment and click Typewriter Tool.
Put the pointer on the area to type any text you want.
Press Enter if you want to start a newline.
To finish typing, click anywhere outside the text you have inputted.
Editing the Typewriter Comment
Choose Comment and click the Typewriter Tool
on the toolbar.
Put the pointer between the letters to activate the typewriter text field.
Do any changes to the text you have inputted. Use Backspace or Delete keys to delete the
characters before or after the pointer.
To finish editing, click anywhere outside the text field.
Tips: You can use the Arrow Keys to move the pointer right and left or up and down.
Using the Spell Checker
You are able to use the Spell Checker if the security settings allow. When you are trying to insert
any text with Typewriter, you will be prompted to download Foxit Spell Check Language
component if this package hasn’t been installed on your computer. Click Yes to download this
update.
114
To download this add-on from the Foxit Website, see also “Spell Checker” .
If you have installed Spell Checker, then when you use typewriter to insert any English text, this
tool will try to find any spelling errors and highlight them with squiggly lines.
Right click on the misspelled words, and you will see a list of suggested words.
Choose one of the suggested words to correct your input or ignore the squiggly line.
Moving the Typewriter Comment
Do one of the following:
Choose Comment and click the Typewriter Tool
on the toolbar, and follow the steps
below:
A. Put the pointer between the letters to activate the typewriter text field.
B. Move the pointer to the leftmost or rightmost side of the text field.
C. When the cursor turns to be an arrow
, hold down the mouse and drag the
typewriter comment to the intended place.
Tips:
 You can use Home, End or Arrow Key to move the cursor among characters.
 When moving the typewriter comment, a rectangle appears.
(Recommended method) Select Hand Tool
or Annotation Selection Tool
, click the
typewriter comment, and move it to the intended place.
Deleting the Typewriter Comment
Do one of the following:
Choose Comment and click the Typewriter Tool
on toolbar. Position the cursor to the
ending or beginning of the text, drag the cursor to select them all, and press the Delete key.
115
(Recommended method) Click the Annotation Selection Tool
or Hand Tool
,
right-click the text field, and choose Delete.
Setting Typewriter Preferences
Click Typewriter tool
on the toolbar, choose Format Menu to expand typewriter setting
toolbars, and then you can set the font style, size, color and alignment of the text.
1. Modifying current font style, size and color of the typewriter
To modify font style, drop down the Font list box, and select the font you want.
To modify font size, drop down the Font Size list box on the Typewriter toolbar, and select an
ideal size for your text.
To set a typewriter font as default, just choose the right font and color. When you close out
of the program, it will save that, and it will default to that you saved before when you open
the program.
To change the color of the current typewriter font, click the Color button
on the
Typewriter toolbar, and select a color as needed.
To apply the bold formatting to the curent typewriter font, click the Bold button
on the
Typewriter toolbar.
To apply the Italic formattting to the current typewriter font, click the Italic button
the Typewriter toolbar.
To cross out the text, select the text to be crossed out and click the Strike buttion
the Typewriter toolbar.
on
on
To underline the text, slect the text to be underline and click the Underline button on the
Typewriter toolbar.
To add a superscript or subscript to the text, click the Superscript button
or Subscirpt
button
correspondingly on the Typewriter toolbar.
2. Aligning text
You can set the alignment of any inputted text using the text-align buttons. These buttons can be
used to set the alignment for text in multiple lines.
116

To align text to the left, click the Align Left button

To center text, click the Center button

To align text to the right, click the Align Right button
on the Typewriter toolbar.
on the Typewriter toolbar.
on the Typewriter toolbar.
3. Changing current character space and scaling
To change the character space of the current typewriter text, click the Character Spacing
button
under Format menu. The Character Spacing dialog box appears. Then enter the
intended value in the Point box, and click Ok to change.
Note: The value inputted should be >=0.
To change horizontally the font scale of the current typewriter text, click the Character Scale
button
under Format menu, select a percentage from the drop-down menu, or click
More to manually enter a customized percentage.
To change line spacing of the current typewriter text, click the Line Leading button
on
the Typewriter toolbar, enter the value to adjust the leading and click OK.
Adding Comments in a Text Box or Callout
Callout Tool and Text Box Tool are designed for users to create comments in a callout text box or a
box.
Callout text boxes are especially useful when you want to single out (but not obscure) a particular
area of a document. Callout text boxes include three parts: a text box, a keen line, and an
end-point line.
117
A text box is a rectangle of any size, possibly with a border that separates the text box from the
rest of the interface, allowing the user to input text information. A text box usually remains
visible on the document page. It doesn’t close like a pop-up note.
Note: You can add comments to Japanese, Chinese, and Korean text with the Callout Tool or Text
Box tool, but you must have the Eastern Asian Language module installed. Callout text boxes and
Text boxes allow for horizontal text only.
Adding a Callout or Text Box

Choose Comment and click Callout tool

Click the place where you want to insert the callout or text box.
Type the text. Text wraps automatically when it reaches the right edge of the box.

under Typewriter ribbon.
Resizing, moving, editing or deleting a callout or text box
Select the Hand Tool



or Annotation Selection Tool
To resize the callout or text box, select it and drag any of the handles to resize it.
To move the callout or text box, select it and drag to the intended place.
To set the border color or the fill color for the text in callout and text box, please click on the
Border Color button

, and do one of the following:
or the Fill Color button
under Format menu and change
the colors.
To delete the callout or text box, select it and press Delete, or right-click it and then choose
Delete.
Aligning and Centering Typewriter Comments
Choose the Hand Tool
or Annotation Selection Tool
.
Follow the steps specified in “Working with multiple images”.
118
Setting Callout or Text Box Preferences
Please refer to “Setting typewriter preferences”.
Working on Comments
Viewing Comments
To view comments in the Comments panel, please go to View > Navigation Panels >
Comments.
Comments Panel
In the Comments panel, there are a number of options as follows:
Expand All
– expands all of the items listed on the Comments panel.
Collapse All – collapses all of the items in the view.
Next – goes to the next comment if you choose to expand all the items.
Previous – goes to the previous comment if you choose to expand all the items.
Sort By – selects to sort the comments by type, page, author or date, status or checkmark
status.
Show/Hide Comments
comments as needed.
Search box
—select Hide all comments or Show all comments to hide or show all
—input keywords to search comments.
119
The comment is displayed in the popup note or on the markup icon and acts as a tooltip
when the popup note is closed.
If you input the comment with too many lines, it will only show some of the comment while
the rest will be displayed as suspension points when the cursor is moved outside the popup
note. Click inside the message box to view it with scroll bar.
Setting a Status
Setting a status is useful for keeping track of comments that you have read. You can use the
status to indicate which comments you want to accept, reject, cancel, or complete.
By setting the review status, you can let review participants know how you are going to handle
the comment. Once the review status is set, you cannot remove the review status display from
history in the Review History list, even if you change the review status to None.
Changing the Status of a Comment:
With the Hand tool, Annotation Selection tool or the corresponding tool selected, right-click
a comment you want to change the status of, choose Set Status >
Accepted/Rejected/Cancelled/Competed from the drop-down menu.
To view a markup’s history of changes:
A. Right-click the markup, and then choose Properties.
B. In the Properties dialog box, click the Review History tab to view the history of status
changes people have made to a markup.
Setting Checkmark Status for Comments
Checkmarks are useful for keeping track of comments you have read or that require further
action. You can make checkmark for each comment according to your needs.
To set the checkmark of a comment, please follow the steps below:
Go to View > Navigation Panels > Comments.
Click Expand All tool on the Comments panel to expand all the comments, and you will
find the check box right beside the comment.
Click the check box to set the check status of a comment.
(Recommended) Right-click the comment you are going to make the checkmark, and choose
Mark with Checkmark from the drop-down menu.
After marking the comments with checkmarks, you can sort comments by checkmark status for
easy reference.
120
Changing the Appearance of Markups
You can change the color and appearance of comments or markups before or after you create
them. Also, you can set the new look as the default appearance for that tool.
Changing the appearance of Note Comments
1. After you create a note comment, right-click the note icon and choose Properties…, or choose
Properties from the Options Menu of the popup note to display the Note Properties dialog
box.
2. In the Note Properties dialog box, do any of the following, and then click Close:
Click the Appearance tab to change the color and opacity of the comment.
Click the General tab to change the author’s name and subject of the comment.
Click the Review History tab to see the history of changes people have made to the status of
a comment during a review. See also “Setting a status”.
Click the Note Type tab to change the type of icon used.
Check Locked at the bottom of the Note Properties dialog box to prevent the comment from
being altered or deleted.
Check Set Current Properties as Default at the bottom of the Note Properties dialog box to
set current properties as default for note comments.
Changing the Appearance of Text Markups
Follow the steps of “Changing the appearance of Note Comments”.
There is no Note Type tab in Text Markups settings.
Changing the Appearance of Drawing Markups
121
In the Properties dialog box, do any of the following, and then click Close:
Click the Appearance tab to change such options as the color, opacity and type of border
used. The type of the comment selected determines which options are available.
Click the General tab to change the author’s name and subject of the comment. Under the
General tab, you can also see the creation/modification time of the drawing markup.
Click the Review History tab to see the history of changes people have made to the status of
a comment during a review. See also “Setting a status”.
Check Locked at the bottom of the Properties dialog box to prevent the comment from
being altered or deleted.
Check Set Current Properties as Default at the bottom of the Properties dialog box to set
current properties as default for drawing markup comments.
Changing the Appearance of Typewriter Markups
Click the Appearance tab to change the opacity of the comments.
Click the General tab to change the author’s name and subject of the comment. Under the
General tab, you can also see the creation/modification time of the typewriter markup.
122
Click the Review History tab to see the history of changes people have made to the status of
a comment during a review. See also “Setting a status”.
Select Locked at the bottom of the Note Properties dialog box to prevent the comment from
being altered or deleted.
Check Set Current Properties as Default at the bottom of the Typewriter Properties dialog
box to set current properties as default for typewriter comments.
Note: For Typewriter appearance, only opacity can be changed.
Changing the Appearance of a Text Box or Callout
Please refer to “Changing the appearance of Drawing Markups”.
Note: You can press ESC to return to Hand tool
anytime the comment tool is applied.
Setting Current Properties as Default
Foxit Reader allows you to set current properties of any comment as default for easier application.
For example, when you set the color or opacity of the Highlight tool, you can right-click the
highlighted contents and choose Set Current Properties as Default in the drop-down menu. When
you highlight the contents next time, the color and opacity you set before will be applied.
To set current properties as default, please do one of the follows:



Right-click the comment in the PDF and choose Set Current Properties as Default in the
drop-down menu.
Choose Options on the popups of the comment, and click Set Current Properties as Default
from the drop-down window.
Right click the comment and choose Properties, then check Set Current Properties as Default
option at the bottom of the Properties dialog box.
Replying to Comments
Replying to comments is useful in shared reviews, when participants can read each other’s
comments. They can also be used by review initiators to let reviewers know how their
suggestions are being implemented. All replies appear in the popup note and are listed below the
original comment. You can view the respective reply with the reply title and mark.
1. Replying to original comments in the pop-up note
Using the Hand tool, Annotation Selection tool, or the corresponding comment tool >
open the pop-up note for the comment.
Right-click the original comment and select Reply, or right-click the comment icon and
select Reply.
Type your reply in the text box that appears in the pop-up window.
123
2. Responding to other reviewers’ comments
Using the Hand tool, Annotation Selection tool, or the corresponding comment tool >
open the pop-up note for the comment.
Right-click other reviewer’s comment and select Reply to this Reply.
Type in your comments in the text box that appears next to the reviewer’s comment.
3. Deleting the Reply Message
In the note pop-up window, right-click the Text message window and click Delete this Reply.
Note: Right-click the comment icon and select Delete will remove this markup.
Sorting Comments
Usually, comments are listed as per their pages in the document. However, you can sort them by
type, author, date, status and checkmark status for easy references.
To sort the comments, please follow the steps below:
Go to View > Navigation Panels > Comments.
Click
and choose relevant option.






Page: to sort comments by page.
Type: to sort comments by the types of tools, such as typewriter, note, file
attachment, etc.
Author: to sort comments by their creators.
Date: to sort comments by the date they are created.
Status: to sort comments by their status, such as rejected, approved, completed or
canceled, etc.
Checkmark Status: to sort comments by checkmark status.
Searching Comments
Foxit Reader offers a quick search option for comments for easier reference.
124
To search comments, just follow the steps below:

Choose View > Navigation Panels > Comments (or click comment icon
on the left side

of the Navigation panel) to open Comments Panel.
Input the keywords in the Search Box on the top of Comment Panel, and Foxit Reader will
filter the comment contents and display the results in Comment Panel.
Summarizing Comments
Summarizing comments is an easy way to obtain a synopsis of comments associated with the PDF.
You can create a new PDF with comments when summarizing comments. Comments summary
could be sorted by page, author, date or type to satisfy different requirements. Moreover, you
can set properties for new document such as paper size, margin, page range, font size, etc. in the
Create Comment Summary.
1.
Choose Comment and click Summarize Comments in the Manage Comments ribbon.
2.
In Create Comment Summary dialog box, please do the following:
3.

Select how you prefer to create comment summary.

Select Comment Type, such as All, Text, Line, etc.

Choose paper size, such as A4, A3, etc.

Choose font size and how to sort comments.

Specify page range.

Choose the color and opacity of Connector Line (only available when you choose to
create document and comments with connector lines.)
Click OK and the comments will be summarized in a new PDF. You can save the new PDF as
you need.
Importing & Exporting Comments
Please refer to “Importing & Exporting Comments Data”.
Printing Comments
Foxit Reader allows users to print the document together with the content of the attached notes.
To print texts created by comment tools, please choose File > Print > click Summarize Comments.
A window will pop up asking you whether to print the summarized comments in current
document, click Yes to continue printing.
125
Sending Annotated PDFs
Foxit Reader makes it easy for users to share reviews. You can send your annotated PDFs to any
reviewers to see and respond to your comments.
To send an annotated PDF file, do the following:


Click on the Save button
to save all the comments you have made.
Go to Share > Send to > Email.
Note: If you did not save the document before emailing it, Foxit Reader will pop up a window
asking you whether to save changes before sending.
126
Chapter 6 – Form
Foxit Reader is extremely useful for form filling and form designing. Please read below for more
information.
General Information
There are two kinds of “form” files. First, is a PDF file with fillable fields, which enables you to fill
the form directly by clicking the form fields without using other features. This is called an
Interactive PDF Form. The other kind of form is a plain PDF file with lines and texts, which should
be filled with the typewriter feature in Foxit Reader. This is called a Non-interactive PDF Form.
You will need to navigate and adjust views of a form in exactly the same way that you do in
ordinary PDFs.
Interactive Form
For interactive forms, you will see a document message bar appear between the Reader toolbars
and the form itself. To close this message bar, please click
on the rightmost. If you do not
want to see it again when reopening this file, please choose File > Preferences > Forms> General>
check Always Hide Document Message Bar. To show it, redo the steps and uncheck Always Hide
Document Message Bar.
The left side of the message bar typically informs you that this document is a fillable form. The
right side of the message bar has two buttons. The first is a Highlight Fields button, which
highlights the backgrounds of all blanks to be filled in and outlines any required blanks, making it
obvious and easy to see them at a glance. Click it to highlight all fields or cancel the highlight. The
other one of the buttons is Close button
, click it to close the Document Message Bar.
XFA (XML Forms Architecture) Form
With Foxit Reader, you can fill in XFA forms with the Hand Tool
, the same which you were
able to do with normal fill-able forms (also known as AcroForm).
See also “Setting form Display Preferences”.
Non-interactive Form
The document message bar will not appear. This kind of form acts like an ordinary PDF document
127
that has plain text and you will need to use the Typewriter feature to fill in this form.
Filling in PDF Forms
PDF form operation: Foxit Reader allows you to fill in PDF forms and print them out. These basic
features are free for both personal and non-personal usage. Moreover, Foxit Reader supports
advanced form operations, such as saving filled-out forms and import/export forms.
Filling Interactive Forms
If a PDF form contains interactive form fields, you can fill in the form with the Hand Tool
.
When you place the pointer over an interactive form field, the pointer icon changes to one of the
following:
Pointing Finger
-- Appears when the pointer is over a button, radio button, check box,
or item on a list.
Arrow
-- Appears when you can select an item in a list of options.
I-beam icon
-- Appears when you can type text into the form field.
To fill in an interactive form, please do the following:
If necessary, select the Hand tool
.
(Optional) To make form fields easier to identify, check the Highlight fields on the document
message bar. Form fields appear with a colored background (yellow by default).
Click in the first form field you want to fill in, either to select that option or to place an
I-beam pointer
in the field so that you can start typing.
Right-click the text fields, and choose Paste or Select All to do other operations.
After making a selection or entering text, do any of the following:
A. Press Tab or Shift + Tab to accept the form field change and go to the next or previous
field.
B. Press the Up arrow key to select the previous option in an item of list, or press the Down
arrow key to select the next option.
C. Press ESC to reset clear a form entry.
Note: If the current form field is a single-line text box, you can press Enter to accept your
typing and deselect the field. You cannot start a newline in text box. If the current field is a
check box, pressing Enter or Space bar turns the check box on or off. In a multiline text form
field, pressing Enter creates a paragraph return in the same form field.
After you fill in the form fields, do one of the following:
128
A. Click the submit button if one exists. Clicking this button sends the form data to a
database across the web or over your company intranet.
B. Click Save icon
on toolbar, or choose File > Save.
C. Choose File > Save As…, and specify a location for the copy.
Note: If the form author gave Reader users extended rights, the saved copy will include the
entries you made in the forms. Otherwise, the saved copy will be blank.
Print the form.
Clearing a form entry
Click one of the form fields, and use the Backspace key or Delete key.
Clearing Unsaved Form Entries
Choose Forms > Form Data > Reset form.
Clearing a Form in a Browser
Do either of the following:
Choose Form > Form Data > Reset Form. You can’t undo this action.
Quit the browser, and start again.
Note: Clicking the web browser’s Reload for Refresh button, the Back or Go Back button, or
following a link to another page may not complete clear the form.
Filling Lengthy Entries in Forms
Some PDF forms can contain dynamic text fields, which changes the text you input in size to
accommodate the text fields. The text appears smaller and smaller when the words you type
exceed the current size of the field. When you’re finished typing and the field is deactivated, the
text field displays all of the typed text in smaller size.
Spell-checking Form Entries
You can spell-check the text you typed in form fields or Form Designer if the security settings
allow.
If you have installed the Spell Checker, when you insert any English text in the form fields, the
spelling errors will be highlighted and underlined with squiggly lines.
129
To spell-check entries, do the following:
Right-click on the misspelled words, and you will see a list of suggested words.
Choose one of the suggested words to correct your input or ignore the squiggly line.
If all the suggested words are not the exact words you want to input, try to correct them
with other words.
Filling non-interactive forms
If a PDF form contains non-interactive form fields, you can fill in the form with the Typewriter
. When you place the pointer over a non-interactive form field, the basic pointer icon doesn’t
change.
Non-interactive PDF forms can be printed and filled in by hand. Or, you can click the Typewriter
icon
to type information over the blank form fields and then save or print a copy of the
completed form.
To use the Typewriter Tool to fill the non-interactive forms and spell-check the entries, please
refer to “Using the Typewriter Tool” .
Commenting on Forms
You can comment on PDF forms, just as on any other PDF. You can add comments only when the
form creator has extended rights to the users.
Whether or not these comments are included when the form is submitted depends on how it is
submitted. For example, if you use Foxit Reader to print the form for mailing or faxing, the
comments do not appear. But if you attach the filled-in form to email as a complete PDF, the
comments are included. Also, you can send the comments separately as an email attachment.
See also “Comments”.
Importing & Exporting Form Data
Please refer to “Importing & Exporting Form Data”.
130
Chapter 7 – Data Import & Export
Data in PDFs can be imported and exported to FDF files. FDF, namely Forms Data Format, a file
format used for interactive form data, is used when submitting form data to a server, receiving
the response, and incorporating it into the interactive form. It can also be used to export form
data to stand-alone files that can be stored, transmitted electronically, and imported back into
the corresponding PDF interactive form. In addition, FDF can be used to define a container for
annotations that are separate from the PDF document to which they apply. Or sometimes, when
you have to send a PDF file to others but do not want them to see your comments and form data,
you may export all the data with this function, clear the file and send it to others. In this way, all
the data you added can be removed.
There are two kinds of data that can be imported and exported: comment data and form data.
You can also send the comment data or form data as FDF file to your clients or friends. The FDF
does not only save all the data contents of the PDF documents, but also remembers their specific
positions and status in the files.
Importing & Exporting Comments Data
This feature is especially useful for PDF reviewing. When you receive an email invitation to a PDF
review, the invitation typically includes the PDF as an attachment or provides a URL to the PDF.
Alternatively, you may receive a Form Data Format (FDF) attachment. When opened, an FDF file
configures your review settings and opens the PDF in a web browser. At this moment, you need
to know how to import the comment data from the FDF file. Similarly, you may export comment
data and send them as a FDF file to the other participants.
Importing Comments Data
Do one of the following:

Double-click a FDF file to open it directly with Foxit Reader.

Choose Comment > Import tool
in Manage Comments ribbon > navigate to where the
desired FDF file is, select it, and press Open. You will be prompted that the comments data
has been imported successfully.
Exporting Comments Data
To export comments data, please do one of the following;
To export as a FDF
131
A. Choose Comment and click Export tool
in Manage Comments ribbon.
B. You will be presented with a standard Windows “Save” dialog. Navigate to where you
want to save the FDF file (e.g., your Documents folder), write its name and click Save
button.
C. You will be prompted that the data has been exported successfully.
To Export and Send in an E-mail
A. Choose Comment and click FDF via Email tool
in Mange Comments
ribbon.
B. Your default e-mail program will pop up, and the comments data will be exported as a
FDF file and attached in the email automatically.
C. Type the e-mail address and title > click Send.
D. The comments in FDF will be sent separately.
Note: The option of Export comments data will be available only when the comments have been
added to the PDFs.
Importing & Exporting Form Data
Importing and exporting form data is similar to importing and exporting comment data. However,
this function is only for PDF interactive forms. All the options for importing and exporting form
data will be unavailable when you open other ordinary PDFs or non-interactive forms.
To learn how to import and export form data, please view “Importing & Exporting Comments
Data”.
Foxit Reader allows users to export one or multiple form data to a CSV file.
To export a form to a CSV file, please follow the steps below:



Select Form > Form Data > Export > To a New File.
In the Save As dialog box, choose the save path, name the file to be exported and choose
CSV Files (*.csv) in Save as type field.
Click Save to save the file.
132
To export multiple forms to a CSV file, please follow the steps blow:



Choose Form > Form Data > Combine Forms to a Sheet.
Click Add files in the “Export multi-forms to a sheet” dialog box.
In the Open dialog box, select the file to be combined and click Open to add it to the
current form.
133

Alternatively, if you have opened the form to be combined recently, you can check “Contain
forms you closed recently” to call out the forms you recently opened, and then remove the
files you don’t want to add and leave the ones to be combined in the list.

If you want to append the form(s) to an existing file, check “Append to an existing file”
option.
Click Export and save the CSV file in desired path in the Save As dialog box.

134
135
Chapter 8 – Advanced Editing on PDFs
Foxit Reader has brought in some new advanced features for PDF editing. You can even create
bookmarks, add links, attach files, add images, play and insert multiple files, as well as run
JavaScript on PDF files.
Creating Bookmarks
Bookmarks are navigational tools that make your PDF files easier to read. They are usually
generated automatically during the PDF creation. Bookmarks in PDF files provide interactive links
to a specific destination. The reader just needs to click on a bookmark to view the page in which
the bookmark is linked.
Bookmarks are useful for users to mark a place in a PDF file so that users can return to it with
ease. Or you may like to have your own bookmark structure and new bookmark names. Now
with Foxit Reader, you can easily nest, edit, or delete bookmarks in a PDF file if the security
settings allow.
Adding a Bookmark
1. Go to the page where you want the bookmark to link to. You can also adjust the view settings.
2. Use the Hand Tool
to create the bookmark:

To bookmark a portion of a page, adjust the view of the document if necessary, and move
the portion into the center of the window.

To bookmark selected text, use the Select Text Tool
, right-click the selected text and
choose Bookmark or press Ctrl+B.
3. Select the bookmark under which you want to place the new bookmark. If you don’t select a
bookmark, the new bookmark is automatically added at the end of the bookmark list.
136
4. Click the New Bookmark icon
at the top of the Bookmarks Panel, or right-click the selected
bookmark and choose Add Bookmark.
5. Type or edit the name of the new bookmark, and press Enter.
Moving a Bookmark
Select the bookmark you want to move, and then do one of the following:

Hold the mouse button down and then drag the bookmark icon
parent bookmark icon. The Line icon

Right-click the bookmark icon
directly next to the
shows the place where the icon will be located.
and choose the Cut option > right-click the parent
bookmark, and choose Paste after Selected Bookmark.
Note: The bookmark links to its original destination in the document although it is moved.
Organizing a Bookmark Hierarchy
A bookmark hierarchy is an outline or stratified structure that places some bookmarks within
others. It is an efficient way to display a comprehensive list of bookmarks in a PDF file. In Foxit
Reader, multilevel bookmark hierarchy can be defined by properly dragging the bookmark icon in
the Bookmark Panel.
Nesting a Bookmark
Select the bookmark you want to nest, and then do one of the following:

Hold the mouse button down and then drag the bookmark icon
parent bookmark icon. The Line icon
directly underneath the
shows the place where the icon will be located.
137

Right-click the bookmark icon
and choose the Cut option > right-click the parent
bookmark, and choose Paste under Selected Bookmark.
Note: The bookmark links to its original destination in the document although it is nested.
Moving a Bookmark out of Nested Position
Select the bookmark you want to move, and then do one of the following:

Hold the mouse button down and then drag the bookmark icon
parent bookmark icon. The Line icon

Right-click the bookmark icon
directly next to the
shows the place where the icon will be located.
and choose the Cut option > right-click the parent
bookmark, and choose Paste after Selected Bookmark.
Note: The bookmark links to its original destination in the document although it is nested.
Expand or Collapse a Bookmark


Click the plus sign (+) left to the bookmark icon to show any children. Click the minus sign (-)
to collapse the list.
To select the bookmark for the displayed page of the PDF document, click the Expand the
Current Bookmark button
at the top of the Bookmarks panel. See Also: To expand the
current Bookmark.
Editing a Bookmark
In Foxit Reader, you are able to edit, change, or move the bookmarks with ease if the security
settings allow.
Renaming a Bookmark
Right-click the bookmark you want to rename in the Bookmarks Panel > choose the Rename
option > type the new bookmark name.
Resetting a Bookmark’s Destination
Do the following:



In the document pane, move to the location you want to specify as the new destination.
(Optional) Adjust the view magnification.
Right-click the bookmark, and choose Set Destination.
138
Customizing the Text Appearance of a Bookmark
You can change the font style or color of a bookmark to make it easier to read.


In the Bookmarks Panel, right-click the bookmark > choose Properties.
In the Bookmark Properties dialog box, click the Appearance tab, and select the font style
and color for the text.
Note: After defining a bookmark’s appearance, you can set it as bookmarks’ default property by
right-clicking the bookmark and then selecting the option of Use Current Appearance as New
Default.
Adding an Action to a Bookmark
Bookmarks can also perform actions, such as opening a file, executing a menu item, submitting a
form, etc.
1.
Right-click a bookmark, and choose Properties.
2.
In the Bookmark Properties dialog box, click Actions.
3.
Choose an action from the Select Action menu and click Add, and then do the following:
Select Trigger – Specifies the user action that initiates an event: Mouse Up.
Select Action – Specifies the event that occurs when the user triggers the action: Go to a
page view, Open/execute a file, Open a web link, Show/hide a field, Execute a menu item,
Submit a form, Reset a form, Import from data, and Run a JavaScript.
A. Go to a page view – designate to a specific page view. You can not only designate to a
page in the current PDF, but also to the page in another PDF. Also, you may change the
current zoom setting and then set the position.
To go to a page view, choose this option, click Add button and do one of the following:

Set the position in current document – scroll the current document, go to a new
position where you want to set and click Set this position.

Set the position in another PDF document – click the Open button
on the toolbar >
select the PDF you want to set position > scroll this document and go to a position
where you want to set > click Set this position.
Note: The new PDF document should be opened in the existing window but not a new
window.

Change the view magnification -- scroll in the current document or another document >
go to a new position where you want to set > change the magnification of the position >
click Set this position.
139

Click Cancel to revoke your operation.
B. Open/execute a file – designate to open another file. To do this, please follow the steps
below:

Choose Open/execute a file > click Add… > select the destination file and click Open.
C. Open a web link – designate to open a web link. Do the following:

Choose Open a web link > click Add…> enter the URL of the destination web page.
D. To show/hide a field, select the option > click Add…> choose to show or hide the
selected button when the user triggers the action, and click OK.
E. To execute a menu item, select the option > click Add… > select one of a menu item in
Execute a named command dialog box, and click OK.
F. To submit a form, select the option > click Add button > choose the submission method,
select Export Format and decide which fields should be submitted, and click OK.
G. To reset a form, select the option > click Add…> select the fields that will be reset, and
click OK.
H. To import form data, select the option > click Add… > choose the FDF file that contains
the form data you want to import, and click Open.
I. To run a JavaScript, select the option > click Add… > Enter JavaScript, and click OK and
Close.
Actions – Displays the list of triggers and actions that you have defined.
Up and down buttons – Change the order in which the selected action appears listed under
the trigger. (Available only when you have defined multiple actions for the same trigger.)
Edit – Opens a dialog box with specific options for the selected action. You can also
double-click the actions to open a dialog box.
Delete – Removes the selected action.
Deleting a Bookmark
To delete a bookmark, please do one of the following:
Select the bookmark you want to delete and click the Delete button
at the top of the
Bookmarks Panel.
Right-click the bookmark you want to delete and choose Delete.
Note: Deleting a bookmark deletes all the bookmarks that are subordinate to it.
Adding Links
140
You may add rectangle or quadrilateral links to a PDF file and specify their destination, which can
be a page view, a named destination, an external file, or a web page. Also, you are able to change
the appearance of the link, including the thickness, border style and color of the lines when you
create them. This function helps you to lead the readers to related articles, references, or the
intended web page.
Adding a Link
Link Tool enables you to add a link with the shape of rectangle on the PDFs.
To add a link, please do the following:
Choose Home > Insert > Link tool
.
Position the cursor on the place you want to add the link, hold and drag your mouse button
to draw a rectangle.
Tips: To draw a square link, press Shift key when you hold and drag your mouse button.
Right after you draw a link, a Create Link window will pop up, under which you can set the
appearance and destination of the link.

Appearance
A. Thickness – the thickness of the four sides of the rectangle. The higher of the value, the
thicker of the sides. You can choose the thickness from 0-12, while the default is 1.
B. Border Style – the style of the rectangle’s border. There are three types of the border
styles:
Solid: the border is solid, but not hollowed out.
Dashed: the border is drawn as a dashed line.
Underline: the sides are visible except the underline.
Solid Style
Dashed Style
Underline Style
Three Types of Border Styles
C. Highlight – the effect when you click the rectangle link. There are four types of the
highlighting effects:
None: doesn’t change the appearance of the link.
141
Invert: changes the link’s color to its opposite.
Outline: changes the link’s outline color to its opposite.
Inset: creates the appearance of an embossed rectangle.
None
Invert
Outline
Inset
Four Types of Highlight
D. Color – the border color of the rectangle. Click the color button to choose any colors you
like, or you may choose Other Color to add a customized color. The default color is red.
Choose the Color

Destination
The destination refers to any point or location, for example, a web page, a named file or
position the link goes to. There are four options for you to choose:
A. Go to a page view – designate the link to a specific page view. Not only can you designate
the link to a page in the current PDF, but you can also set the link to the page in another
PDF. Also, you may change the current zoom setting and then set the position.
To go to a page view, choose this option, click the Next button and do one of the following:

Set the position in current document – scroll the current document, go to a new
position where you want to set and click Set this position.

Set the position in another PDF document – click the Open button
on the toolbar >
select the PDF you want to set position > scroll this document and go to a position
where you want to set > click Set this position.
Note: The new PDF document should be opened in the existing window but not a new
window.
142


Change the view magnification -- scroll in the current document or another document >
go to a new position where you want to set > change the magnification of the position >
click Set this position.
Click Cancel to cancel out of your operation.
B. Go to a named position – designate the link to a named position that has been set by
creator of the current document.
To go to a named position, choose this option and click the Next button > select a named
position for the pop-up list > click OK.
Note: An empty pop-up list indicates that no position has been named by the document’s
creator.
C. Open/execute a file – designate the link to open another file. To do this, please follow the
steps below:

Choose Open/execute a file > click the Next button > select the destination file and click
Select.
D. Open a web page – designate the link to open a web page. Do the following:

Choose Open a web page > click the Next button > enter the URL of the destination
web page or click the drop-down button to select a web site you have opened before.
E. Others (use action property page) – add an action to the link. Please refer to “Adding an
action to a bookmark” for more details.
Moving or Resizing a Link
You can move and resize the link after you create it.
Select one of the link tools or the Annotation Selection Tool
, and then move the
pointer over the link so that the handles appear.
Do one of the following:
A. To move the link, drag it to the desired area.
B. To resize the link, drag any corner point to adjust.
Deleting a Link
Select one of the link tools or the Annotation Selection Tool
, and then move the
pointer over the link so that the handles appear.
Select the link you want to delete.
Press the Delete key.
143
Attaching Files
You can attach PDF files and other types of files to a PDF. If you move the PDF to a new location,
the attachments move with it. Attachments may include links to or from the parent document or
to other attachments.
There are two options for you to add an attachment: attaching a file as a comment and attaching
a file. An attached file as a comment will appear in the page with the File Attachment icon
by default, while the attached file acts invisible and only can be seen when you click the File
Attachment icon.
Adding a File as a Comment
Do the following:
Choose Comment > Pin > File tool
.
Click the place in which you want to attach a file.
In the Open dialog box, select the file you want to attach, and click Open.
Note: If you try to attach certain file formats (such as EXE), Foxit Reader warns you that
attempting to attach the file of this type is denied due to your security settings.
The File Attachment Icon
will appear at the place you designated.
Working on the Attachment Comment
You can open the attachment, add a description, move and delete it, and set the preferences.
Opening an Attachment
Select the Hand Tool
button
, Annotation Selection Tool
or the Attach a file as comment
, and do the following:
Double-click the File Attachment icon
.
In Open File Attachment dialog box, choose the option as you need and click OK.
144
Open File Attachment Dialog Box
A. Open the file attachment – open this file attachment, and the dialog box will always pop
up when you double-click the File Attachment icon.
B. Always open file attachments of this type – open this file attachment, and the files of
this type will be opened automatically when you double-click the File Attachment Icon
next time.
C. Never open file attachments of this type – forbid to open the file attachments of this
type. Whenever you double-click the File Attachment Icon, the files of this type will be
forbidden to open and you’ll be prompted that “File attachment of this type cannot be
opened because of your security settings”.
See also “Doing Security Settings”.
Save the PDF.
Moving a File Attachment Icon
Select the Hand Tool
button
, Annotation Selection Tool
, or the Attach a file as comment
, click and drag the File Attachment icon to move it to other place.
Deleting an Attachment Comment
Select the Hand Tool
button
, Annotation Selection Tool
, or the Attach a file as comment
, and do one of the following:
Right-click the File Attachment icon
and choose Delete.
Click the File Attachment icon and press Delete key.
More Options with an Attachment Comment
145
You are able to work on the attachment comment just like an ordinary comment, including set
status, mark with checkmark, open popup note and add some descriptions, reply to the
comment, and change the icon’s appearance. For all the operations, please refer to “Chapter 5 –
Comments”.
Adding a File
Do the following:
Choose View > Navigation Panels > Attachment to open the Attachment Panel and then click
icon.
In the File Attachment dialog box, click Add Files > Add Files or Add Folder.


If you choose Add File, select a file and click Open in the Open dialog box.
If you choose Add Folder, select a folder and click OK in Browse for Folder dialog box.
Click OK in File Attachment dialog box and the selected file (s) will be added to current PDF
document.
Click Save to save the document.
Alternatively, Foxit Reader supports attaching files by dragging and dropping. Steps are as follows:
Choose View > Navigation Panels > Attachment to open the Attachment Panel.
Drag and drop the file to be attached to the Attachment Panel.
Foxit Reader will pop up a window to ask you whether to attach the selected file to current
PDF document. Click OK to complete the operation. You can check “Always attach file when
dragging files to the attachment panel” option and the next time you drag and drop a file to
the Attachment Panel, the file will be attached directly.
146
Working on the Attachments
You can open, save, delete and edit settings to the attachments.
The Attachments Panel
In the Attachments panel, there are a number of options as follows:
Open
– opens the attachment you select.
Save
– saves the attachment you select to a new file.
Add
– adds a file to the current PDF.
Edit Description – edits the description to the attachment you select.
Settings
– changes the security settings when you open an attachment. For the details, please
refer to “Doing security settings”.
147
Delete
– deletes the attachment you select.
Opening an Attached File
Choose View > Navigation Panels > Attachments to open the Attachments panel.
Select one of the attachments > click the Open button
in the Attachments panel.
Note: Only one attachment can be chosen at a time.
Saving an Attached File
This option provides you a chance to save as the attachment to a new file.
Choose View > Navigation Panels > Attachments to open the Attachments panel.
Select one of the attachments > click the Save button.
Navigate the filename and location > click Save.
Deleting an Attached File
Choose View > Navigation Panels > Attachments to open the Attachments panel.
Select one of the attachments > click the Delete button.
Doing Security Settings
To change the security settings you have set when you open the attachment file as a comment,
choose View > Navigation Panels > Attachments to open the Attachments panel. Click the
Settings button in the Attachment Panel and do one of the following:
To add a new extension, click the Add button to input the file extension in the Security
Settings dialog box.
To delete an extension, click one of the existing extensions and click the Delete button.
Adding Images
You can specify a rectangle on any part of a PDF page and then insert an image into that
rectangle. This feature is helpful when you want to explain or show something more dynamically.
For example, a section of an article you are reading needs an explanation, and you realize that
maybe an image will be the best answer. You can add an image with the image tool in Foxit
Reader.
148
Adding an Image
You can add an image to a PDF with the Image Tool
. After you insert a new image, you can
adjust its size and position, change the appearance and other settings, etc.
To add an image, do the following:
Choose Home and click the Image Tool
in Insert ribbon.
Drag a rectangle on the page to define the canvas area for the image.
In the Add Image dialog box, click the Browse button to select the image that you want to
insert and click the Open button. You will see the URL of this image has been added to the
Location field.
(Optional) If you find that you chose the wrong image, click the Browse button again to
select the correct one.
Click the Advanced button to edit the setting of the image.
Image Placement Dialog Box
A. When to scale – choose when to scale the image you insert. There are four options:
a) Always: scale the image to fit the rectangle you draw.
b) Icon is too big: zoom out the image to fit the rectangle if the former one is bigger than the
latter one, or show the image with its original size.
c) Icon is too small: zoom in the image to fit the rectangle if the former one is smaller than
the latter one, or show the image with its original size.
d) Never: never scale the images. Show the image with its original size all the time.
B. Scale – choose to scale the image non-proportionally or proportionally. This option will be
disabled when you select Never in the field of When to scale.
149
a) Non-proportionally: scale the image to fit the rectangle when the magnification is changed.
b) Proportionally: scale the image in its proportion.
C. Border – drag and move the scroll bar to change image’s position in the rectangle. The
coordinates change when you move the scroll bar.
Click OK for your changes to take effect, or click Reset to reset the data to the original
settings.
To rotate the image, click and select one of the options.
Click OK.
Moving and Resizing an Image
You can move and resize an image after inserting.
Moving an Image
Select the Annotation Selection Tool
or the Image Tool
, put the pointer over the
image so that the handle appears.
Click and drag the image to another place you like.
Resizing an Image
Select the Annotation Selection Tool
or the Image Tool
, put the pointer over the
image so that the handle appears, and click the image.
Place the cursor on any corner point. Pointer changes into the cursor showing the direction
at which the rectangle will be resized.
To Resize the Image
Drag the cursor outside, it will increase the size of the rectangle proportionally. Drag the
cursor inside, it will decrease the size of the rectangle proportionally.
150
Setting Properties of an Image
Double-click the image, or right-click it and select Properties.
In the Settings tab, follow the steps in “Adding an Image”.
In the Appearance tab, do any of the following:
A. Annotation is hidden from view – Check the option to make the image you inserted
invisible or uncheck the option to lay the image over the content of PDF.
B. Border – Change the type, width, style and color of the rectangle’s border.
Width: choose to show the rectangle’s border or not and the width of the border. If No
border is selected, the Style and Color will be disabled.
Style: choose the style of the border line, solid or dashed.
Color: change the color of the border. Click the color button to select any color you like,
or click Other Color to choose a customized color.
(Optional) Check Locked to avoid modifying your settings.
Deleting an Image
Select the Annotation Selection Tool
or the Image Tool
, put the pointer over the
image so that the handle appears.
Right-click the image and choose Delete from the drop-down window.
Working with Multiple Images
Selecting Multiple Images
Select the Annotation Selection Tool
or the Image Tool
.
Press and hold Shift or Ctrl and click the images you want to edit.
Aligning Images
You can align the selected images left, right, top, bottom, vertically or horizontally. Select one of
the image as the anchor, the rest of the images will be placed respectively to the left edge, right
edge, top edge, bottom edge, vertical axis or horizontal axis of the anchor image.
Select two or more images that you want to align.
Right-click the anchor, and then choose a command in Align menu as follows:
A. To align a column of images, choose Left, Right, or Vertically to align them respectively to
the left edge, right edge, or vertical axis of the anchor image.
B. To align a row of images, choose Top, Bottom, or Horizontally to align them respectively
to the top edge, bottom edge, or horizontal axis of the anchor image.
151
Note: The align menu commands move the other selected images to line up with the edges of the
anchor image.
Below is an example:
A
A. Suppose that you want to set A
as the anchor image.
B.
Select these two images >
right-click A and choose Align >
Left. You will see the other
image is placed to the left edge
of A.
Centering Images
This function enables you to center the rectangle enclosed by the images you select vertically,
horizontally or both.
Below is an example:
A.
Select two images. You can see
these two images consist of an
area with the shape of rectangle
(marked with red).
152
B.
Right-click one of the images > Center >
Vertically. You will find that the red
rectangle is aligned vertically in the page.
Distributing Images
This function will be available when selecting three or more images.
To distribute the images evenly between the topmost and bottommost images, choose
Distribute > Vertically.
To distribute the images evenly between the leftmost and rightmost images, choose
Distribute > Horizontally.
Below is an example:
A
B
C
A
B
C
A. Select three images A, B and C.
A is the topmost image and C is the
bottommost image.
B.
Right-click any one of the images >
Distribute > Vertically. And you will
see that B is distributed evenly
between A and C.
Resizing Images
You can adjust multiple images with the same height, width, or both. Select one of the images as
the anchor, and the rest of the images will be resized with the same height or width as that of the
anchor image.
Below is an example:
153
A
A. Select images A and B. Suppose
B
that you want to set A as the
anchor image.
A
B
B.
Right-click A > Size > Height. And you
will see that the height of B is resized
to be the same as that of A.
Setting Properties of Multiple Images
Select multiple images > right-click one of them > Properties.
A dialog pops up with an Appearance tab. Follow the steps specified in “Setting Properties of
an Image”.
Adding Video & Audio
Foxit Reader not only supports playing multimedia in PDFs, but also allows users to add and edit
multimedia files to a PDF. In Foxit Reader, you can add movies and sounds to PDFs.
Video & Audio Tool in Foxit Reader adds movies and sounds to your PDF documents and creates a
multimedia PDF experience. Adding movies or sounds to PDFs is as easy as inserting an image.
"Movies" are desktop video files with formats such as AVI, QuickTime, and MPEG, and file
extensions such as .avi, .wmv, .mov, .qt, .mpg, and .mpeg. An animated GIF file always has a .gif
file extension, while “Sounds” are like midis, wavs, and mp3 files.
You can also provide different renditions of the movie to play if the users’ settings vary. For
example, you may want to include a low-resolution rendition for users with slow Internet
connections.
Note: If an alert message tells you that no media handler is available, you must install the
appropriate player before you can add clips to the PDF. For example, you must install QuickTime if
you want to embed an MOV file in a PDF.
154
Adding Movies or Sounds
1. Choose Home and click Video & Audio tool
in Insert ribbon.
2. Press and hold mouse button down, drag to select an area on the page where you want the
movie or sound to appear. For movies, the play area is the exact size of the movie frame.
3. In the pop-up Add Video & Audio dialog box, you will see some options listed below:
Location: click the Browse button to select the movie file you want to insert.
Content Type: the type of the media you insert. It is selected automatically. But you can also
specify the clip type if you want. Please note that changing the Content Type setting may
cause problems in playing the media.
Embed content in document: includes the media file into the PDF file. This option will
increase the file size of the PDF. It is selected by default. If the check box is cleared, you will
not be able to play it if you open this PDF file on other computers.
Poster Settings: choose whether to display an image in the play area when the movie isn’t
playing. You can choose to use no poster or create poster from file.
Editing the Play Area
After adding a movie or a sound clip, you can move, resize or delete the play area easily.
Choose the Annotation Selection Tool
, the Video & Audio tool
. Click
the play area to select it.
To move the clip, hold down the left mouse button and drag the clip to a new location on
the page.
To resize the clip, place the cursor on any corner point. When the pointer changes into the
cursor showing the direction at which the rectangle will be resized, drag one of the corners
of the frame to your intended size. Holding down the Shift key retains the movie clip’s
proportion.
To delete the clip, simply select it and press Delete, or right-click the clip and choose Delete.
To align, center, distribute, or size multiple clips, please refer to Working with multiple
images.
Setting Video & Audio Properties
In Foxit Reader, you can specify properties for the multimedia files you added, such as the
appearance of a movie’s play area, whether the movie plays once or continuously, create
alternate renditions, etc.
To set video & audio properties, please do the following:
155
Select the Video & Audio tool
or the Annotation Selection Tool
.
Double-click the play area or right-click the play area > Properties.
The pop-up Video & Audio Properties dialog box has a Settings tab, an Appearance tab and an
Action tab. Also, there are two items on every tab:


Locked – Check to prevent any further changes to any video & audio properties.
Close – Applies and saves the current properties, and closes the Video & Audio properties
dialog box.
Note: If you select Locked on any tab, it will lock all options for this video & audio file, but not just
the options on that tab.
1. Settings tab for the Video & Audio Properties
The Settings tab in video & audio properties contains the following options:
Annotation Title -- Enter the title of the movie or sound in the Annotation Title box. This
title does not determine which media file is played.
Alternate Text -- Enter a description of the media file in the Alternate Text box.
Renditions – Allows you to create alternate or other renditions to ensure that users can play
the movie or sound clip on their systems.
A. List Renditions for Event -- You can assign different renditions to different actions but
Mouse Up is chosen by default. Mouse Up means that when the mouse button is clicked
and released, the rendition is played.
B. Add Rendition – There’re three ways for you to choose:
Use a File: Double-click the file you want to add to the rendition list. The content type is
selected automatically.
Use a URL: Type the URL and select the content type.
By Copying an Existing Rendition: Select the rendition you want to copy.
C. Edit Rendition – When clicking the Edit Rendition button, the Rendition Settings dialog box
appears, which allows you to specify the playback location, and other settings to differentiate it
from other renditions.
Media Settings -- Specifies the general properties for the movie or sound clip:
Rendition Name: Enter the name for the rendition, which will appear in the list of
renditions. (This name does not determine which media file is played.)
Media Clip Location: Specify the clip by typing or navigating to it.
Content Type: This will be selected automatically when you specify the clip location.
Changing the Content Type setting may cause problems in playing the media.
156
Embed content in document: Includes the media file into the PDF file. This option will
increase the file size of the PDF. It is selected by default. If the check box is cleared, you will
not be able to play it if you open this PDF file on other computers.
Rendition Alternate Text: Type a description of the rendition.
Allow Temp File: Specify whether writing a temp file is allowed and when. Some media
players write a temp file when they play a movie or sound clip. If you want to prevent users
from easily copying the media content in a secure document, you may want to disallow the
creation of temp files. However, selecting this setting may prevent the movie from being
played by media players that require the use of temp files.
Playback Settings – Use this tab to determine how the movie or sound clip is played.
Keep Player Open: Select whether you want the player to close after it plays the movie or
sound clip.
Volume: Lets you specify how loud the movie will be played.
Show Player Controls: Select to display a controller bar at the bottom of the play area
allowing users to stop, pause, or play the media, provided the media player supports
player controls.
Repeat: Lets you replay a clip two or more times, or continuously.
Player List: Click Add to specify a player and the settings that are required, preferred, or
disallowed to play the movie or sound clip. Select the name of the player and the status. If
you set the status of more than one player to Required, only one of the required players
may be used to play the rendition. If you set the status of players to Preferred, these
players are selected over nonpreferred players (but not over required players). If you set
the status of players to Disallowed, they are not used to play the rendition.
Add/Edit/Delete button: Allows you to add a new player, as well as edit or delete the
selected player in the Player List.
Playback Settings – Determines whether a movie or sound clip is played in the PDF, remains
hidden while played (recommended for sound clips), is played in a floating window, or is played
full screen. The options for Floating Window Settings are unavailable except you choose Floating
Window.
Playback Location: Selects the location for playing a movie or sound clip.
Background Color: Selects the background color for the media player.
Show title bar: Selects to show or hide title bar when playing the media in a floating
window.
Show control closing window: Selects to show or hide the close button at the top right
corner in a floating window.
Title Text: Adds a title for the media that will be showed on the title bar when playing the
media in a floating window.
Resize: Allow or forbid users to resize the floating window. There’re three options for you
to choose: Don’t allow user to resize window, Allow user to resize window but maintain
original aspect ratio, or Allow user to resize window.
Window Position: The window position is determined relative to the document window,
157
application window, the virtual desktop or document monitor.
Width/Height: Specifies the width and height of the floating window.
If Window is Offscreen: Selects to play, do not play, or move window onto screen to play
the media file if the floating window is offscreen.
2. Appearance tab for the Video & Audio Properties
In the Appearance tab, do any of the following:

Annotation is hidden from view – Check the option to set the media file you inserted
invisible or uncheck the option to lay the media file over the content of PDF.

Border – Change the width, style and color of the media file’s border.
A. Width -- Choose the width of the border.
B. Style -- Choose the style of the border line, solid or dashed.
C. Color -- Change the color of the border. Click the color button to select any color you like,
or select Other Color to choose a customized color.
D. Change Poster – Choose to use no poster or a specified poster for the media file.
3. Actions tab for the Video & Audio Properties
Please refer to “Adding an Action to a Bookmark”.
158
Chapter 9 – Printing
Printing is a process for reproducing text and images. When you have finished reading a helpful
article or designing a PDF form, you may need to send it to an inkjet or laser printer and print it
out with custom page sizes. With this section, you can get the help to set options in the Print
dialog box to ensure that the finished document appears as intended.
How to Print a PDF Document?
1. Make sure you have installed the printer successfully.
2. Click the Print button
on toolbar, or choose Print from the File menu.
3. Specify the printer or plotter, page range, number of copies, and other options.
4. Click OK to Print.
Printing a Portion of a Page
To print a portion of a page, you need to refer to the Snapshot tool
.

Choose Home and click SnapShot Tool

Drag around the area you want to print.
Right-click in the selected area > choose Print, and then refer to the Print Dialog.

under Tools tab.
Printing PDFs in Black and White Color
Foxit Reader allows users to print PDFs in black and white color. Steps are as follows:

Choose File > Print to open Print dialog.

Click Properties to open Foxit Reader PDF Printer Properties.

Select Black & White from the drop down list of Color option.

Click OK to save your setting, and then the PDFs will be printed in black & white mode.
159
Print Dialog
The print dialog is the final step before printing. You can modify the printer in this dialog as well.
Be aware that changing the printer may affect the page setup if the new selected printer has a
different paper size, for instance.
The Print dialog allows you to make a number of changes about how your document prints.
Follow the step-by-step descriptions in Print dialog box.
To open the Print dialog box, choose File > Print…or right-click the tab and select “Print Current
Tab” if using Multi-Tab browsing.
160
The Print Dialog Box
Name -- You can select your printer from the list of installed printers. To configure advanced
options of the printer, click on the Properties button. This will display printer specific
options.
Print Range – This option lets you print different parts of a PDF document. You can specify to
print all pages or some certain ones.
All – Prints all pages of a PDF document.
Current view – Prints the page area (including text, comments, images, tables or a
combination of all of them) that is visible in the current view.
Current page – Prints the page that is visible in the current view.
Pages – Specifies the range of pages to print separate pages in the PDF. Enter page numbers
and/or page ranges separated by commas. For example, 1,3,7-10.
Subset – Provides options for setting noncontiguous page range.
All Pages in Range – Prints all the pages within the specified range.
Odd pages only – Prints only pages with odd numbers within the specified range.
Even pages only – Prints only pages with even numbers within the specified range.
Note: This option is especially helpful for two-side printing.
Reverse pages – Prints pages in reverse order. If page ranges are entered, the pages print
opposite of the order in which they were entered. For example, if you select to print the
161
document from page 5 to page 30, selecting Reverse pages option will print page 30 to page
5.
Copies – Sets the number of copies you want to print.
Collate – Assembles the printouts in a proper numerical or logical order when printing
several copies. This option will be disabled when printing just one copy.
Scale – Sets the scaling during printing, including the following five options:
A.
B.
C.
D.
E.
None: Prints the pages without scaling.
Fit to Printer Margins: Scales small pages up and large pages down to fit the paper.
Reduce to Printer Margins: Reduces large pages to fit the paper.
Custom Scale: Resizes the pages by the percentage you specify.
Choose Paper Source by PDF page size: Automatically chooses paper source according
to PDF page size.
Tile Large Pages: To tile the pages which are larger than the selected paper size at a specified
scale.
A.
B.
C.
D.
Page Zoom: Scales the pages by the percentage you specify.
Overlap: Sets the amount that each tile overlaps the adjacent tiles (unit: cm).
Cut Marks: Adds cut marks to each page to help you trim the overlap.
Labels: Adds the name of the document and page number on each tile.
Multiple Pages Per Sheet: Allows you to print multiple pages in one sheet.
A. Pages per sheet: Choose a predefined number of pages or custom the number of pages
to be printed in one sheet. If you select a predefined one from the drop-down menu,
Foxit Reader will automatically select the best paper orientation; otherwise, Foxit
Reader will let you define the orientation as required.
B. Page Order: Defines how the pages are ordered on the paper, including Horizontal,
Horizontal Reversed, Vertical and Vertical Reversed.
C. Margins: Sets the margins for printing.
D. Print Page Border: Check this option to print pages with page border.
Booklet: Allows you to print PDFs in booklet format.
A. Binding: Sets the binding direction, including Left and Right.
B. Booklet subset: Choose Front or Back if you only want to print one side of each sheet of
paper, choose Both to print PDFs in double-sided booklet format.
C. Margins: Sets the margins for booklet printing.
Auto-Rotate – Adjusts the PDF document’s orientation to match the orientation specified in
162
the printer properties.
Auto-Center – Places the PDF pages in the center.
Print What – Specifies to print documents only, annotations only or both.
Document – Prints the document contents without annotations.
Document and Annotations – Prints document contents and annotations.
Annotations – Prints annotations only.
Preview -- Foxit Reader provides an instant preview in the Print dialog box.
You can use the magnification tool as well as the navigation tool on the print dialog box to
preview the individual pages in desired magnification level. Both the document size and the
paper size are shown under the Preview.
Tip: To change the unit of page dimensions, please go to File > Preferences > Documents >
Measurement Units.
Print as image—To print the PDF document as an image.
Print as Grayscale – To print the PDF document with color images, texts, or other objects as
shades of gray.
For example, RGB or CMYK image-only PDFs, in particular, can be quite large. Converting
these PDFs to grayscale can reduce the size of the file and increase the speed of printing.
Print as normal
Print as Grayscale
163
Chapter 10 – Appendices
This section is a collection of supplementary materials for this user manual, including Keyboard
Shortcuts, and Command Lines.
Keyboard Shortcuts
There are number of keyboard shortcuts that you can use to speed up your navigation within the
Foxit Reader. Some particularly important ones are listed here:
File Keys
Action
Shortcut
Open File
Ctrl + O
Close File
Ctrl + W, or Ctrl + F4
Save As
Ctrl + Shift + S
Close All
Ctrl + Shift + W
Print Document
Ctrl + P
Exit Foxit Reader
Ctrl + Q
Save
Ctrl + S
View Keys
Action
Shortcut
Full Screen
F11
Zoom In
Ctrl + Num +
Zoom Out
Ctrl + Num -
Zoom To
Ctrl + M
Actual Size
Ctrl + 1
Fit to Page
Ctrl + 0
Fit Width
Ctrl + 2
Fit Visible
Ctrl + 3
Rotate Clockwise
Ctrl + Shift + Plus
Rotate Counterclockwise
Ctrl + Shift + Minus
Reset Toolbars
Alt + F8
164
Hide Toolbars
F8
AutoScroll
Ctrl + Shift + H
Stop AutoScroll
ESC
Show or hide Navigation pane
F4
Show or hide Menu Bar
F9
Switch between tabs
Ctrl + Tab
Edit Keys
Action
Shortcut
Copy
Ctrl + C, or Ctrl + Insert
Find Text
Ctrl + F
Find Next
F3
Find Previous
Shift + F3
Preferences
Ctrl + K
Undo
Ctrl + Z
Redo
Ctrl + Shift + Z
Select Text Tool Keys
Action
Shortcut
Copy
Ctrl + C
Select All
Ctrl + A
Add Bookmark
Ctrl + B
165
Tool Keys
Action
Shortcut
Hand Tool
Alt + 3
Select Text
Alt + 6
Snapshot
Alt + 7
Exit Full Screen Mode
ESC, F11
Switch to Text Viewer
Ctrl + 6
Document Keys
Action
Shortcut
Previous Page
Ctrl + Page Up
Next Page
Ctrl + Page Down
First Page
Ctrl + Home
Last Page
Ctrl + End
Go to Page
Ctrl + G
Select All
Ctrl + A
Page Down
Space
Page Up
Shift + Space
166
Command Lines
Foxit Reader defines parameters that allow you to perform operations on a PDF with a command.
To check the command lines that can be used in Foxit Reader, please go to Help > Command Line
Help.
Command
Result
nameddest=destination
Open and highlight the target bookmark.
page=pagenum
Turn to the target page.
zoom=scale
Zoom the PDFs.
pagemode=bookmarks
Open the bookmark panel in the Navigation Pane.
pagemode=thumbs
Open the thumbnail panel in the Navigation Pane.
pagemode=layers
Open the layers panel in the Navigation Pane.
pagemode=none (default)
Close all the panels in the Navigation pane.
fdf="fdf path"
Open the FDF file.
toolbar=1|0
Show or Hide Tool Bar.
statusbar=1|0
Show or Hide Status Bar.
navpanes=1|0
Show or Hide Navigation Pane.
167
Contact Us
Feel free to contact us should you need any information or have any problems with our products.
We are always here, ready to serve you better.
•
Office Address:
Foxit Corporation
42840 Christy Street. Suite 201
Fremont CA 94538
USA
•
Mailing Address:
Foxit Corporation
42840 Christy Street. Suite 201
Fremont CA 94538
USA
•
Sales:
1-866-680-3668 (24/7)
•
Support:
1-866-MYFOXIT or 1-866-693-6948 (24/7)
•
Fax:
530-535-9288
•
Website:
www.foxitsoftware.com
•
E-mail:
Sales and Information - [email protected]
Technical Support - [email protected]
Marketing Service - [email protected]
168
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement