Advertisement
Advertisement
SEMI-PRO DIGITAL
TIRE PRESSURE GAUGE
INSTRUCTIONS
GETTING STARTED
Push ON to turn gauge on. Gauge shuts off automatically after 30 seconds of no use
(no pressure). Gauge auto-zeros at turn-on.
If zeroing is ever needed, push ON and hold for 5 seconds. Back light is on whenever gauge is on.
Change batteries when the battery icon shows in the upper right corner of the display. Replace with 2 quality
“AAA” batteries. Access is on the back.
Install with correct polarity.
LongacreRacing.com
WARNING
DO NOT DROP THE UNIT. KEEP IT
CLEAN AND DRY. DO NOT EXPOSE TO
STRONG ELECTROMAGNETIC FIELDS
(caster/camber gauge magnets).
DO NOT EXCEED RATED PRESSURE.
When the Low Battery indicator appears in the upper right of the display, replace with 2 quality “AAA” batteries. Access is on the back of the gauge.
52-LIT-5254 REV B
UNITS CHOICE:
PSI here
Bar here Low Battery indicator
UNITS
Button
CONVERT TO METRIC, BAR, OR OTHER.
• Turn gauge on. When 0.0 appears push
AND HOLD the UNITS button on the right side.
• After 3 seconds, the units indication will start to flash. This is along the top of the display. PSI will be on the upper left.
• Release the UNITS button and then push again to change. Options are PSI, BAR,
Kgm/cm2, and kPa.
• Once you have reached your selection, stop pushing the button. The gauge will return to normal function in 5 seconds.

Public link updated
The public link to your chat has been updated.
Advertisement