Mounting the transfer connection to the K-377
Picture 1: Attaching the transfer connection to the K-377 KjelSampler
• Connect the transfer hose and the steam hose to the two fittings on top of the sealing cap on the sampler arm. Secure both connections with hose clamps 1 .
The red steam hose has to be fixed to the first position (marked with a red ring) - pointing to the front of the instrument!
• Fix the plastic cable channel with the two provided screws 2 to the sampler arm.
Mounting the transfer connection to the K-375
Picture 2: Attaching the transfer connection to the K-375 KjelMaster
• Remove the tightening screw from the holder on the valve 1 .
(The screw is not required for connection to K-377.)
• Slide the ring of the chain fastener onto the holder on the valve 1 and fix it by tightening the threaded bar.
• Slide the the plastic holder of the transfer connection onto the threaded bar 2 . Hold it in place by screwing the second nut hand-tight on top.
• Mount the white transfer hose on the valve using the provided screw connection 3 .
• Mount the red steam hose on the steam valve and secure it with a hose clamp 4 .
BÜCHI Labortechnik AG
9230 Flawil 1/ Switzerland
T +41 71 394 63 63
F +41 71 394 65 65 www.buchi.com Quality in your hands
