Em b ed d ed So lu tio n s

Em b ed d ed So lu tio n s
A9 Data Sheet - 2004-03-25
Embedded Solutions
A9 - 6U VMEbus Single-Board
Computer
u
u
u
u
u
u
u
u
u
MC68040/25MHz + MC68360/25MHz
Upward-compatible with A10
1-slot VMEbus master or slave
EL/LCD/CRT graphics
48MB DRAM, 8MB Flash, 2MB SRAM
10Mbit Ethernet
4 COMs, SCSI, PCMCIA, CAN
4 M-Module slots
4 additional local M-Module slots with A8EXT
The A9 CPU board combines workstation characteristics
powerful 32-bit processor(s), DRAM, SRAM and Flash
with embedded control capabilities and industrial
memory, multiple serial and mass storage interfaces,
requirements.
graphics and Ethernet, making the A9 a fully
The A9 with its 68040 (with MMU and FPU) plus a 68360
functional VME CPU card. The other part, the many
is a mid-range industrial workstation. It is hardware
features often required for hard industrial
and software compatible with the A10 and B9L/B10,
applications, are also provided on the card: including
comprising a family of boards scalable in size and
PC-card carrier, CAN bus interface, timers, RTC,
performance.
watchdog, temperature sensors, and DRAM parity.
Because of full compatibility between A9 and A10, a
Four M-Modules providing flexible industrial I/O
single processor family (and a single BSP) can be used
extension can be mounted on the same double Eurocard,
many places in a system.
and can be accessed without hitting the VMEbus.
Major SBC components are part of the design story: the
The A9 single-board computer is partly compatible with
the MVME162 and MVME167 boards by Motorola.
1
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Technical Data
CPU
• A9: 32-bit CPU MC68040/25MHz
· 22 MIPS
• A10: 32-bit CPU MC68060/50MHz
· Superscalar processor with two integer units
· Over 100 MIPS
Peripheral Controller
• MC68360/25MHz I/O RISC processor
M-Module Extension
• 4 M-Module slots (requires additional VMEbus slot)
• Characteristics: A08, A24, D16, D32, INTA, INTC
• DMA16, DMA32 on slot 1
VMEbus
• 6U VMEbus form factor
• VMEbus master/slave interface
· VIC068
· Interrupter
· Interrupt handler
· A16, A24, A32, D16, D32
· VMEbus slot-1 functionality
Memory
• Up to 2MB boot EPROM, 16-bit data bus
• Up to 32 MB DRAM
· 1 JEDEC SIMM module
· 32-bit data bus
· 4-bit parity
· Burst access
• Up to 16MB VMEbus-shared DRAM, permanently soldered
• Up to 8MB Flash
· 32-bit data bus
· On-board programming
• Up to 2MB SRAM, battery-backed via VMEbus
· 4 SMD places (JEDEC)
· 32-bit data bus (128KB/512KB/2MB steps)
Interfaces
• 2 SMC UARTs (debug)
· RS232 interfaces
· 9-pin D-Sub connector
• 1 SCC intelligent serial interface
· Keyboard/mouse PC/AT compatible
· Two 6-pin DIN connectors
• 2 SCC intelligent serial interfaces
· 6-wire interfaces
· Physical interface using SA adapter via 10-pin plug
connector
2
· RS232..RS485, isolated or not: for free use in system
(cable to front or back)
• Ethernet controller
· CPM of the MC68360
· Local DMA
· AUI, Twisted Pair or Cheapernet through interface adapter
• Memory card interface
· Disk-like interface
· JEIDA/PCMCIA
· On-board card slot unit
• CAN bus interface
· ISO High-Speed
· Optically isolated via adapter on P2
• SCSI-2 interface
· Local DMA
· Connection via P2
Graphics Controller
• CL-GD6440 from Cirrus Logic
· LCD/EL/CRT display
· 32-bit data bus
· Resolution up to 1024x768 dots with 256 colors
· Linear memory addressing, packed pixel mode
· 1MB frame buffer RAM
· VGA connector at front panel
· LCD/EL connector via P2
Miscellaneous
• Analog touch-screen interface via P2
• D/A converter for controlling the display contrast
voltage (on adapter card via P2)
• Battery-backed real-time clock
• 4 general-purpose timers
• EEPROM (256x16) for setup
• Hex switch
• 16 LEDs
• Reset and abort switches
• Programmable watchdog
• Temperature measurement
• Single 5V supply
Electrical Specifications
• Power requirements (no M-Modules, no display):
· +5V, 3A typ., 5A max.
· +12V, 0.1A typ., 1A max.
· -12V, 20mA typ., 0.1A max.
• Power consumption: 17W typ.
• Isolation voltage for Ethernet/CAN bus: 500V DC
• MTBF:
· A9/A10: 35,000h @ 50°C
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Technical Data
·
A8-EXT: 52,000h @ 50°C
Mechanical Specifications
• Dimensions: standard double Eurocard, 233.3mm x 160mm
• Weight (no M-Modules/Ethernet/SA adapter):
· A9: 464g
· A10: 464g
· A8-EXT: 222g
Environmental Specifications
• Temperature range (operation):
· 0..+60°C
· Industrial temperature range on request
· Airflow: min. 10m³/h
• Temperature range (storage): -40..+85°C
• Relative humidity range (operation): max. 95%
non-condensing
• Relative humidity range (storage): max. 95% non-condensing
• Altitude: -300m to + 3,000m
• Shock: 15g/0.33ms, 6g/6ms
• Vibration: 1g/5..2,000Hz
Safety
• PCB manufactured with a flammability rating of 94V-0 by
UL recognized manufacturers
EMC
• Tested according to EN 55022 / 1999-05 (radio
disturbance) and EN 55024 / 1999-05 (immunity) with
regard to CE conformity
Software Support
• MENMON
• VxWorks
• OS-9
3
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Diagram
4
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Related Products
Standard Hardware
01A008E00
A8-EXT, VMEbus 6U, extension board for A8/A9/A10, 4 M-Module slots,
with P2
01A009-00
A9, VMEbus 6U, single-board computer, CPU 68040/25MHz and CPU
68360/25 MHz, 16MB DRAM, 0.5MB SRAM, 8MB Flash, SCSI-2, Ethernet,
graphics, PC card, CAN, 4 M-Module slots, 1-slot front panel
01A009-01
A9, VMEbus 6U, single-board computer, CPU 68360/25 MHz and CPU
68040/25 MHz, 16MB DRAM, 0.5MB SRAM, 8MB Flash, SCSI-2, Ethernet,
PC card, 4 M-Module slots, 1-slot front panel
01A010-00
A10, VMEbus 6U, single-board computer, CPU 68060/50MHz and CPU
68360/25MHz, 16MB DRAM, 0.5MB SRAM, 8MB Flash, SCSI-2, Ethernet,
graphics, PC card, CAN, 4 M-Module slots, 1-slot front panel
01A010-01
A10, VMEbus 6U, single-board computer, CPU 68060/50MHz and CPU
68360/25MHz, 16MB DRAM, 2MB SRAM, 8MB Flash, Ethernet, SCSI-2,
PC card, 4 M-Module slots, 1-slot front panel
The A9 is partly compatible with the MVME162 board by Motorola. You can download the
corresponding compare chart here.
The A9 is partly compatible with the MVME167 board by Motorola. You can download the
corresponding compare chart here.
Systems & Card Cages
Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies
and backplanes on request.
0700-0006
CE-conforming housing for VMEbus 6U: closed 19" rack, 5U, 7 slots, J1+2
backplane (not VME64), power supply 230V, fan incl. power cable no.
6080-0020
Accessories
5
05A008-02
A9, A10 M-Module mounting kit for 4 M-Modules, 1 additional 1-slot
front panel, 4 60-pin contact strips
05A008-03
Accessory A9/A10: SA adapter mounting kit on M-Module mounting kit
05A008-12
Accessory A9/A10: 1-slot front panel for 2 SA adapters
05M000-01
M-Module cable, 2m, 21-pin VG receptacle to pig tail, for connection to
VMEbus P2 mating connector (05M000-02), for wiring of M-Module I/O
signals via P2
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Related Products
05M000-15
Front-panel cover for M-Module cut-outs at front panels, snap-in, 10 pcs
08AD19-00
Adapter A8/B8 family: Ethernet AUI
08AD20-00
Adapter A8/B8 family: Cheapernet
08AD21-00
Adapter A8 family: Twisted Pair
08AD22-00
Adapter A8 family: P2 adapter with SCSI-2
08AD23-00
Adapter A8 family: P2 adapter with SCSI-2 and CAN
08AD23-01
Adapter A8 family: P2 adapter with SCSI-2, CAN and graphics (LCD,
touch screen, contrast voltage)
08AD44-00
DRAM SIMM module, 32MB, fast-page mode, 60ns
08AD44-01
DRAM SIMM module, 16MB, fast-page mode, 60ns
08SA01-00
Serial interface adapter, RS232, not optically isolated, 0..+60°C
08SA02-00
Serial interface adapter, RS422/485, half duplex, optically isolated,
0..+60°C
08SA02-01
Serial interface adapter, RS422/485, full duplex, optically isolated,
0..+60°C
08SA02-07
Serial interface adapter, RS422/485, full duplex, optically isolated,
temperature range: -40..+85°C
08SA03-00
Serial interface adapter, RS232, optically isolated, 0..+60°C
08SA03-01
Serial interface adapter, RS232, optically isolated, -40..+85°C
08SA04-00
Serial interface adapter, TTY, optically isolated, 0..+60°C
For more functions realized with SA adapters, see the listing on MEN's website. Please
contact sales to make sure that these SA adapters can be used in the board configuration
you are looking for.
Software
10ABMX-07
OS-9 V.3.0: OS-9/68k + NET license
10A009-01
OS-9 V.3.0: BSP for A9/A9L (object code, PC disk format, MEN)
10A009-62
VxWorks V.5.4/Tornado 2.0 standard BSP for A9/A9L/A10
VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP
and driver support provided by MEN please refer to the ordering numbers below.
For OS-9 BSP and driver support provided by MEN please refer to the ordering numbers
below.
Documentation
20A008-00
6
A9/A10 user manual
®
A9 Data Sheet - 2004-03-25
Embedded Solutions
Related Products
20SA00-00
SA adapter user manual
For the most up-to-date ordering information and direct links to other data sheets and
downloads, see the A9 online data sheet under www.men.de. --> Click here!
Germany
MEN Mikro Elektronik GmbH
Neuwieder Straße 5-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
E-mail [email protected]
www.men.de
France
MEN Mikro Elektronik SA
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
E-mail [email protected]
www.men-france.fr
UK
MEN Micro Ltd
Whitehall, 75 School Lane
Hartford, Northwich
Cheshire UK, CW8 1PF
Phone +44 (0) 1477-549-185
Fax +44 (0) 1477-549-178
E-mail [email protected]
www.menmicro.co.uk
USA
MEN Micro, Inc.
PO Box 4160
Lago Vista, TX 78645-4160
Phone (512) 267-8883
Fax (512) 267-8803
E-mail [email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue.
All brand or product names are trademarks or registered trademarks of their respective holders.
Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for
inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to
make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of
the application or use of the products described in this document.
The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes.
Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik
has consequently adapted and released the product.
Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved.
7
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement