Genetix Price List 2010 -11
Biometra Price List 2010
Cat #
DESCRIPTION
Thermocycler
Thermocycler - systems
070-800
TProfessional Gradient 60 for 60 tubes (0.5 ml)
070-801
TProfessional Gradient 96 for 96 tubes (0.2 ml), strips or
96 well microplates
070-900
TProfessional 60 for 60 tubes (0.5 ml)
070-901
TProfessional 96 for 96 tubes (0.2 ml), strips or
96 well microplates
070-902
TProfessional 384 for 384 well microplates
070-850
TProfessional Standard Gradient 60 for 60 tubes (0.5 ml)
070-851
TProfessional Standard Gradient 96 for 96 tubes (0.2 ml),
strips or 96 well microplates
070-950
Tprofessional Standard 60 for 60 tubes (0.5 ml)
070-951
TProfessional Standard 96 for 96 tubes (0.2 ml), strips or
96 well microplates
070-952
Tprofessional Standard 384 for 384 well microplates
070-601
TProfessional Basic Gradient for 96 tubes (0.2 ml), strips or
96 well microplates
070-701
TProfessional Basic for 96 tubes (0.2 ml), strips or
96 well microplates
050-800
TGradient Thermocycler 48 for 48 tubes (0.5 ml)
050-801
TGradient Thermocycler 96 for 96 tubes (0.2 ml), strips
or 96 well microplates
050-802
TGradient 384 for 384 well microplates (non-gradient)
050-803
TGradient in situ for 4 microscope slides (non-gradient)
050-900
T1 Thermocycler 48 for 48 tubes (0.5 ml)
050-901
T1 Thermocycler 96 for 96 tubes (0.2 ml) or 96 well microplates
050-902
T1 Thermocycler 384 for 384 well microplates
050-903
T1 Thermocycler in situ for 4 microscope slides
050-904
T1 Thermocycler Combi for 38 x 0.5 ml or 96 x 0.2 ml tubes
050-920
T1 plus Thermocycler 48 for PC control (48 x 0.5 ml)
050-921
T1 plus Thermocycler 96 for PC control
(96 x 0.2 ml or 96 well microplates)
050-922
T1 plus Thermocycler 384 for PC control (384 well microplates)
050-923
T1 plus Thermocycler in situ for PC control
(4 microscope slides)
050-924
T1 plus Thermocycler Combi for PC control
(38 x 0.5 ml or 96 x 0.2 ml tubes)
050-550
Tpersonal 20 for 20 tubes (0.5 ml)
050-551
Tpersonal 48 for 48 tubes (0.2 ml)
050-552
Tpersonal Combi for 18 x 0.5 ml or 48 x 0.2 ml tubes
050-720
T3000 Thermocycler 20 for 3 x 20 tubes (0.5 ml)
050-723
T3000 Thermocycler 48 for 3 x 48 tubes (0.2 ml)
050-724
T3000 Combi for 0.5 ml tubes (3 x 18) or 0.2 ml tubes (3 x 48)
050-991
TRobot 96 Thermocycler
050-992
TRobot 384 Thermocycler
Genetix List
Price 2010
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
POR
Thermocycler - modules
050-910
T1 module 48 for 48 tubes (0.5 ml)
219,631
050-911
T1 module 96 for 96 tubes (0.2 ml) or 96 well microplates
219,631
050-912
T1 module 384 for 384 well microplates
219,631
050-913
T1 module in situ for 4 microscope slides
150,059
050-914
T1 module Combi for 40 x 0.5 ml or 96 x 0.2 ml tubes
219,631
050-810
TGradient module 48 for 48 tubes (0.5 ml)
241,458
050-811
TGradient module 96 for 96 tubes (0.2 ml) or 96 well microplates
241,458
050-812
TGradient module 384 for 384 well microplates (non gradient)
219,631
050-813
TGradient module in situ for 4 microscope slides (non gradient)
163,700
070-810
TProfessional module Gradient 60 for 60 tubes (0.5 ml)
493,830
TProfessional module Gradient 96 for 96 tubes (0.2 ml), strips
493,830
070-811
or 96 well microplates
070-910
TProfessional module 60 for 60 tubes (0.5 ml)
323,308
070-911
TProfessional module 96 for 96 tubes (0.2 ml), strips
323,308
or 96 well microplates
070-912
TProfessional module 384 for 384 well microplates
323,308
Thermocycler - Accessories
Software
050-930
Upgrade from T1 to T1 plus
49,519
070-070
TProfessional Manager Software
47,746
050-821
Serial cable to connect T1plus / T3000 / TRobot to a PC
2,456
(9/25pole-9/25-pole SubD)
050-822
PCI serial interface card (4 Ports), for connenting 4 thermocyclers
26,601
to a PC
050-823
PCI serial interface card (8 Ports), for connecting 8 thermocyclers
38,197
to a PC
Temperature verification
050-410
Portable system for temperature verification of thermocyclers
178,706
(PTMD); incl. sensor for 0.2 (1x) and 0.5 ml (1x) wells
050-411
sensor for 0.5 ml wells (PTMD)
36,833
050-412
sensor for 0.2 ml wells (PTMD)
36,833
050-413
sensor for 384 well blocks (PTMD)
050-414
Portable system for temperature verification of thermocyclers
51,838
152,787
(PTMD); incl. sensor 384 wells
Tubes and strips
050-310
0.2 ml tubes, 1.000 pcs./pckg., transparent, with caps
050-320
0.5 ml tubes, 1.000 pcs./pckg., transparent, with caps
8,185
050-214
250 strips with 8 tubes and 8 caps (0.2 ml), transparent
32,058
050-225
48 well microplate, 50 pcs./pckg.
14,324
050-213
96 well microplate Polypropylene, skirtless , 25 pcs.
12,960
050-232
96 well microplate Polypropylene with skirt, 25 pcs.
12,278
5,457
Microplates
Recommended Standard
050-231
384 well microplate HSQ, 50 pcs./pckg.
50,474
050-240
384 well microplate Polypropylene, 50 pcs./pckg.
42,971
050-194
96 well Aluminum plate for temperature equilibration of microplates
12,278
050-694
384 well Aluminum plate for temperature equilibration
28,648
of microplates
Microplate sealing
050-219
300 strips with 8 caps, for 48-well microplates
050-237
Silicone mat, 50 pcs./pckg.
17,052
8,867
050-250
Adhesive sealing film
13,505
050-251
Nop mat 96 wells, 20 pcs.
23,191
050-252
Nop mat 384 wells, 20 pcs.
35,468
Polyacrylamide Gel Electrophoresis
Minigel and Minigel-Twin - systems
010-000
Minigel, complete system with 1 set of glass plates with fixed
37,391
1.0 mm spacers, 1 comb (10 wells), 1 set of clips (3 pcs),
010-040
1 silicone rubber seal and manual; gel size: 8.6x7.7 cm
Minigel, complete system with 1 set of glass plates with fixed
37,391
0.6 mm spacers, 1 comb (10 wells), 1 set of clips (3 pcs),
010-030
1 silicone rubber seal and manual; gel size: 8.6x7.7 cm
Minigel, without accessories ; buffer chamber, safety lid and
32,321
010-100
manual
Minigel-Twin, complete system with 2 sets of glass plates with
43,982
fixed 1.0 mm spacers, 2 combs (10 wells), 2 sets of clips,
010-140
2 silicone rubber seals and manual
Minigel-Twin, complete system with 2 sets of glass plates with
46,517
fixed 0.6 mm spacers, 2 combs (10 wells), 2 sets of clips,
010-130
2 silicone rubber seals and manual
Minigel-Twin, without accessories ; buffer chamber, safety lid
35,743
and manual
Minigel and Minigel-Twin - accessories & combs
Accessories
010-001
Glass plate with fixed spacers, 1.0 mm
2,456
010-002
Glass plate with fixed spacers, 0.6 mm
2,456
010-003
Notched glass plate with straight edge
2,456
010-004
Notched glass plate with inclined edge
2,456
010-005
Silicone rubber seal, 1.0 mm
832
010-006
Silicone rubber seal, 0.6 mm
832
010-025
Grey seal to be attached to the main chamber (2 pieces)
832
010-007
Clips, 3 pieces
010-010
5 wells (70 µl)
2,865
010-011
10 wells (25 µl)
2,865
010-023
10 wells, for big volumes and high protein concentrations (60 µl)
2,865
014-017
16 wells (20 µl)
4,638
010-012
20 wells (15 µl)
2,865
014-019
28 wells (8 µl)
4,638
010-008
preparative, without marker lane (400 µl)
2,865
014-023
preparative, without marker lane (450 µl)
4,638
010-022
preparative, with marker lane (30 and 380 µl)
2,865
010-009
preparative, with 2 marker lanes (2 x 25 and 350 µl)
2,865
010-015
5 wells (40 µl)
2,865
010-016
10 wells (15 µl)
2,865
010-024
10 wells, for big volumes and high protein concentrations (35 µl)
2,865
014-018
16 wells (10 µl)
4,638
010-020
20 wells (9 µl)
2,865
010-013
preparative, without marker lane (240 µl)
2,865
010-021
preparative, with 1 marker lane (18 and 230 µl)
2,865
010-014
preparative, with 2 marker lanes (2 x 15 and 210 µl)
010-017
Cooling plate
10,641
010-018
Minigel Glass Plate Stand (for Minigel/Twin)
11,186
010-032
Gel Casting Stand for up to 5 mini-gels
23,600
010-019
Rotary table for twin-Chambers (Minigel-Twin, Mini-V 8·10,
20,872
832
2,865
Multigel, Multigel-Long, Model V16-2)
Multigel - systems
010-200
Multigel, complete system with 2 sets of glass plates with fixed
1.0 mm spacers, 2 silicone rubber seals, 2 combs (24 wells),
68,445
010-220
6 clips and manual; gel size: 11x7 cm
Multigel, complete system with 2 sets of glass plates with fixed
68,445
0.6 mm spacers, 2 silicone rubber seals, 2 combs (24 wells),
010-230
6 clips and manual; gel size: 11x7 cm
Multigel, without accessories ; buffer chamber, safety lid
53,869
and manual
Multigel - accessories & combs
Accessories
010-201
Notched glass plate with straight edge
Glass plate with fixed spacers, 1.0 mm
2,728
010-202
010-205
Silicone rubber seal, 1.0 mm
1,255
010-221
Glass plate with fixed spacers, 0.6 mm
2,865
010-219
Silicone rubber seal, 0.6 mm
1,255
010-209
Grey seal to be attached to the main chamber (2 pieces, short)
559
010-229
Grey seal to be attached to the main chamber (2 pieces, long)
559
010-007
Clips, 3 pieces
832
010-207
11 wells (50 µl)
3,274
010-203
12 wells (45 µl)
3,274
010-204
24 wells (18 µl)
3,683
010-208
preparative, with 2 additional marker lanes (2 x 40 and 500 µl)
3,274
010-222
24 wells (14 µl)
010-019
Rotary table for Twin-chambers (Minigel-Twin, Mini-V 8·10,
2,728
3,683
20,872
Multigel, Multigel-Long, Model V16-2)
010-029
Universal glass plate stand with leveling feet, 4 positions for any gel
29,739
Multigel long - systems
010-300
Multigel-Long, complete system with 2 sets of glass plates with
68,445
fixed 1.0 mm spacers, 2 silicone rubber seals, 2 combs
010-320
(24 wells), 9 clips and manual; gel size: 11x12 cm.
Multigel-Long, complete system with 2 sets of glass plates with
68,445
fixed 0.6 mm spacers, 2 silicone rubber seals, 2 combs
010-330
(24 wells), 9 clips and manual
Multigel-Long, without accessories ; buffer chamber, safety lid
53,488
and manual
Multigel long - accessories & combs
Accessories
010-301
Notched glass plate with straight edge
4,229
010-321
Glass plate with fixed spacers, 0.6 mm
3,274
010-302
Glass plate with fixed spacers, 1.0 mm
2,865
010-304
Silicone rubber seal, 0.6 mm
1,255
010-303
Silicone rubber seal, 1.0 mm
1,119
010-209
Grey seal to be attached to the main chamber (2 pieces, short)
559
010-329
Grey seal to be attached to the main chamber (2 pieces, long)
559
010-007
Clips, 3 pieces
832
010-207
11 wells (50 µl)
3,274
010-203
12 wells (45 µl)
3,274
010-204
24 wells (18 µl)
3,683
010-208
preparative, with 2 additional marker lanes (2 x 40 and 500 µl)
3,274
010-222
24 wells (14 µl)
010-019
Rotary table for Twin-chambers (Minigel-Twin, Mini-V 8·10,
3,683
20,872
Multigel, Multigel-Long, Model V16-2)
010-029
Universal glass plate stand with leveling feet, 4 positions for any gel
29,739
Maxigel - systems
010-400
Maxigel, complete system with 2 sets of glass plates with fixed
1.0 mm spacers, 2 silicone rubber seals, 2 combs (12 wells),
95,062
010-430
9 clips, 4 Maxi-clips and manual; gel size: 17x18 cm.
Maxigel, complete system with 2 sets of glass plates with fixed
96,330
2.0 mm spacers, 2 silicone rubber seals, 2 combs (12 wells),
010-440
9 clips, 4 Maxi-clips and manual; gel size: 17x18 cm.
Maxigel, without accessories ; buffer chamber, safety lid
74,782
and manual
Maxigel - accessories & combs
Accessories
010-401
Notched glass plate with straight edge
Glass plate with fixed 1.0 mm spacers
4,229
010-402
010-403
Glass plate with fixed 2.0 mm spacers
4,911
010-007
Clips, 3 pieces
010-416
Maxi-clips, 4 pieces
Silicone rubber seal, 1.0 mm
1,501
010-417
010-418
Silicone rubber seal, 2.0 mm
1,501
010-419
Long grey seal to be attached to the main chamber (2 pieces)
010-420
Short grey seal to be attached to the main chamber (2 pieces)
010-404
12 wells (140 µl/well)
4,911
010-405
18 wells (90 µl/well)
4,911
010-406
24 wells (50 µl/well)
4,911
014-020
25 wells (40 µl/well)
4,638
014-022
preparative, without marker lane 1800 µl/well)
4,638
010-407
preparative, with 2 additional marker lanes (2 x 50 and 1600 µl/well)
4,911
010-408
12 wells (280 µl/well)
4,911
010-409
18 wells (180 µl/well)
4,911
010-410
24 wells (100 µl/well)
4,911
014-021
45 wells (50 µl/well)
4,638
010-411
preparative, with 2 additional marker lanes (2 x 100 and 3200 µl/well)
4,911
010-029
Universal glass plate stand with leveling feet, 4 positions for any gel
29,739
4,911
832
1,501
559
559
Mini V8·10 - systems
21078043
Mini-V 8·10 Gel Electrophoresis Apparatus (EU version) ,
68,445
complete with buffer tank, safety lid, gel support tray,
gel wedge block, 2 pairs of glass plates (2 short glass
plates 7.25 x 10.25 cm and 2 long glass plates
8.25 x 10.25 cm), 2 sets of 0.75 mm thick side
spacers, 2 x 10 well combs (0.75 mm thick) and
manual
21078050
Note: The Mini-V 8·10 Gel Casting Clamp is sold separately.
Mini-V 8·10 Gel Electrophoresis System (EU version),
79,852
complete system with Mini-V 8·10 Gel Electrophoresis
Apparatus and Mini-V 8·10 Blot Module
Note: The Mini-V8·10 Gel Casting Clamp is sold separately.
Mini V8·10 - accessories, spare parts, spacers & combs
Accessories and Spare Parts:
21078241
Mini-V 8·10 Gel Casting Clamp (1 / pkg)
21078233
Mini-V 8·10 Gel Casting Clamp (2 / pkg)
21078035
Glass Plates (mixed pairs, 8.25 x 10.25 cm / 7.25 x 10.25 cm)
21078076
Gel Loading Template (4 / pkg)
11098019
Spring Clips (12 / pkg)
21105333
Stainless Steel Binder Clips (12 / pkg)
5,184
9,549
27,147
(10 pairs)
Spacer Sets (side spacers):
2,865
3,001
10,368
11958147
0.75 mm (2 pairs)
1,501
11958154
1.5 mm (2 pairs)
3,138
Combs, 0.75 mm (max. vol./well at an insertion depth of 5 mm)
11958089
6 wells (40 µl)
2,456
11958113
10 wells (20 µl)
2,456
Combs, 1.5 mm (max. vol./well at an insertion depth of 5 mm)
11958097
6 wells (80 µl)
2,456
11958121
10 wells (40 µl)
2,456
11958063
preparative, with 2 marker lanes (475 µl - volume of the central
3,956
preparative well)
Accessories
11958162
Platinum/Niobium Upper Electrode Replacement Kit Mini-V
11958261
Lower Electrode Replacement Kit Mini-V
5,730
6,684
11958469
Banana Plug Replacement Kit (Includes 2 banana plugs, 1 red
3,138
21078019
Mini V8·10 - blot module & accessories
Mini-V 8·10 Blot Module , complete with blot restrainer, blot
and 1 black cap nut and 2 lock washers)
18,553
support frame, clamping knob, three transfer pressure pads
and manual.
11958048
Transfer Pressure Pads (6 / pkg)
3,274
Mini V8·10 - Gel casting system & accessories
21078027
Mini-V 8·10 Gel Casting System, complete with a casting
50,700
chamber with threaded posts, one end plate with silicone
gasket and fill port, displacement blocks (1 x 1 mm, 2 mm
and 5 mm and 3 x 9 mm), 20 gel separation sheets, 10 pairs
of glass plates, wing nuts and cap nuts, stopcock, tubing
connector, stopper and manual
Note: Combs and spacers are sold separately
11958014
Luer Fitting Kit (Includes 2 stopcocks, 2 stoppers, 2 tubing
3,001
connectors and 1 Luer fill port)
Model V15·17 - systems
21080023
Model V15·17 Gel Electrophoresis Apparatus (EU version) ,
78,585
complete with buffer chamber, safety lid, 1 pair of glass plates
(1 short glass plate 19.7 x 16.0 cm and 1 long glass plate
19.7 x 18.5 cm), 1 pair of 1.5 mm thick side spacers,
1 x 1.5 mm thick bottom spacer, 1 x 20 well comb
(1.5 mm thick) and manual; gel size: 17x15 cm
Note: The Gel Casting Clamp is sold separately
Model V15·17 - accessories, spare parts, spacers & combs
Accessories and Spare Parts:
21070065
Gel Casting Clamp (Model V15·17, V16, V16-2) (1 / pkg)
4,229
21070073
Gel Casting Clamp (Model V15·17, V16, V16-2) (2 / pkg)
7,776
Glass Plates (mixed pairs, 16.0 x 19.7 cm / 18.5 x 19.7 cm)
6,412
11074010
(3 pairs)
11098019
Spring Clips (12 / pkg)
21105333
Stainless Steel Binder Clips (12 / pkg)
3,001
10,368
Spacer Sets (complete with 1 bottom spacer, 2 side spacers and 2 foam blocks)
41077017
0.8 mm thick
4,093
41077025
1.5 mm thick
4,093
41077033
3.0 mm thick
4,502
Combs, 0.8 mm (max. vol./well at an insertion depth of 9 mm):
11956026
10 wells (94 µl)
4,638
11956034
12 wells (72 µl)
4,638
11956042
14 wells (59 µl)
4,638
21076013
20 wells (34 µl)
4,638
11956117
preparative, wit 2 marker lanes (1.000 µl - volume of the central
4,502
preparative well)
Combs, 1.5 mm (max. vol./well at an insertion depth of 9 mm):
11956059
10 wells (175 µl)
4,502
11956067
12 wells (135 µl)
4,502
11956075
14 wells (110 µl)
4,502
21076021
20 wells (63 µl)
4,638
11956125
preparative, with 2 marker lanes (2.000 µl - volume of the central
4,502
preparative well)
Combs, 3.0 mm (max. vol./well at an insertion depth of 9 mm):
11956083
10 wells (350 µl)
4,502
11956091
12 wells (270 µl)
4,502
11956109
14 well (220 µl)
4,502
21076039
20 wells (126 µl)
4,638
11956133
preparative, with 2 marker lanes (4.000 µl - volume of the central
4,502
preparative well)
Accessories:
11099025
Power Cords (EU version) (pair)
6,139
11099041
Power Cords (USA version) (pair)
4,365
11958345
Upper Platinum Wire Replacement
6,139
11958329
Lower Platinum Wire Replacement
6,275
11958212
Wire Hardware Replacement Kit (Includes 1 red cap nut, 1 black
1,501
cap nut, 2 o-rings, 2 rubber washers, 2 electrode boots and
2 hex nuts). Does not include the electrode!
21960059
Gasket Replacement for V15·17 (with 6 foam blocks)
2,728
21070057
Spacer Foam Blocks (12 / pkg)
1,637
11958378
Banana Plug Replacement Kit (Includes everything in the Wire
3,138
Hardware (11958212) Replacement Kit plus 2 banana plugs,
2 long ratchet rivets, 2 short ratchet rivets, 2 thin washers
and 2 thick washers)
11958352
Gel Clamp Replacement Kit (Includes spring, shoulder washer,
2,183
tab, knob and support ring)
11958360
Safety Lid Replacement Kit V15·17 (Includes safety lid, 2 long
8,458
ratchet rivets, 2 short ratchet rivets, 2 thin washers and
2 thick washers)
Model V16 and V16-2 - systems
21070010
Model V16 Gel Electrophoresis Apparatus (USA version),
60,024
complete with safety lid with attached power cords, 1 pair of
glass plates (1 short glass plate 19.7 x 16.0 cm and 1 long
glass plate 19.7 x 18.5 cm), 1 replacement gasket with 6 foam
blocks, 6 spring clips and manual.
Note: Spacer set and comb are sold separately as well as
31071010
optional Gel Casting Clamp.
Model V16-2 Gel Electrophoresis Apparatus (USA version),
complete with safety lid with attached power cords, 2 pairs of
glass plates (2 short glass plates 19.7 x 16.0 cm and 2 long
glass plates 19.7 x 18.5 cm), 2 replacement gaskets with
12 foam blocks, 12 spring clips and manual.
Note: Spacer sets and combs are sold separately as well as
optional Gel Casting Clamp.
65,480
Model V16 and V16-2 - accessories, spare parts & combs
Accessories and Spare Parts:
21070065
Gel Casting Clamp (Model V15·17, V16, V16-2) (1 / pkg)
4,229
21070073
Gel Casting Clamp (Model V15·17, V16, V16-2) (2 / pkg)
7,776
Glass Plates (mixed pairs, 16,0 x 19,7 cm / 18,5 x 19,7 cm)
6,412
11074010
(3 pairs)
11098019
Spring Clips (12 / pkg)
21105333
Stainless Steel Binder Clips (12 / pkg)
3,001
10,368
Spacer Sets (complete with 1 bottom spacer, 2 side spacers and 2 foam blocks)
41077017
0.8 mm thick
4,093
41077025
1.5 mm thick
4,093
41077033
3.0 mm thick
4,502
Combs, 0.8 mm (max. vol./well at an insertion depth of 9 mm):
11956026
10 wells (94 µl)
4,638
11956034
12 wells (72 µl)
4,638
11956042
14 wells (59 µl)
4,638
21076013
20 wells (34 µl)
4,638
11956117
preparative, wit 2 marker lanes (1.000 µl - volume of the central
4,502
preparative well)
Combs, 1.5 mm (max. vol./well at an insertion depth of 9 mm):
11956059
10 wells (175 µl)
4,502
11956067
12 wells (135 µl)
4,502
11956075
14 wells (110 µl)
4,502
21076021
20 wells (63 µl)
4,638
11956125
preparative, with 2 marker lanes (2.000 µl - volume of the central
4,502
preparative well)
Combs, 3.0 mm (max. vol./well at an insertion depth of 9 mm):
11956083
10 wells (350 µl)
4,502
11956091
12 wells (270 µl)
4,502
11956109
14 wells (220 µl)
4,502
21076039
20 wells (126 µl)
4,638
11956133
preparative, with 2 marker lanes (4.000 µl - volume of the central
4,502
preparative well)
Accessories:
11099041
Power Cords (USA version) (pair)
4,365
11958428
Upper Platinum Wire Replacement
4,365
11958436
Lower Platinum Wire Replacement
4,365
11980067
Wire Hardware Replacement Kit (Includes 1 red cap nut, 1 black
3,683
cap nut, 2 o-rings, 2 rubber washers, 2 electrode boots and
2 hex nuts). Does not include the electrode!
21960026
Gasket Replacement for V16 and V16-2 (with 6 foam blocks)
21070057
Spacer Foam Blocks (12 / pkg)
2,728
11962065
Safety Lid Replacement V16
12,550
11962057
Safety Lid Replacement V16-2
15,552
1,637
Agarose Gel Electrophoresis
Compact XS - systems
025-000
Compact XS with gel tray for gel size 8.2 cm x 7.1 cm.
30,293
Complete system with chamber, safety lid, UV transparent gel
025-010
tray, 2 combs (11 wells, 1.0 mm thick)
Gel casting system XS.
6,084
Casting chamber for gel tray 8.2 cm x 7.1 cm
025-099
Compact XS system
Consisting of Compact XS (025-000) and gel casting
36,124
system XS (025-010)
Compact S - systems
025-100
Compact S with gel tray for gel size 8.2 cm x 10.5 cm.
31,687
Complete system with chamber, safety lid, UV transparent gel
tray, 2 combs (11 wells, 1.0 mm thick)
025-110
Gel casting system S
6,591
Casting chamber for gel tray 8.2 cm x 10.5 cm
025-199
Compact S system
36,757
Consisting of Compact S (025-100) and gel casting
system S (025-110)
Compact XS and Compact X - accessories & combs
Combs, 1.0 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-001
8 wells, 30 µl/well, multichannel pipet compatible, 9 mm spacing
3,547
025-002
11 wells, 20 µl/well
3,547
025-003
13 wells, 16 µl/well
3,547
025-004
16 wells, 12 µl/well, multichannel pipet compatible, 4.5 mm spacing
3,547
Combs, 1.5 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-015
Preparative comb: 1 well (342 µl) plus 2 marker wells (30 µl/well)
3,547
025-011
8 wells, 45 µl/well, multichannel pipet compatible, 9 mm spacing
3,547
025-012
11 wells, 30 µl/well
3,547
025-013
13 wells, 24 µl/well
3,547
025-014
16 wells, 18 µl/well, multichannel pipet compatible,
3,547
4.5 mm spacing
Gel trays
025-020
Gel tray for 8.2 cm x 7.1 cm gel size, UV transparent,
7,230
2 comb positions with 3.0 cm distance
025-021
Gel tray for 8.2 cm x 10.5 cm gel size, UV transparent,
7,639
2 comb positions with 4.7 cm distance, 3 comb positions
with 3.1 cm distance
Compact M - system
025-200
Compact M with gel tray for gel size 12.4 cm x 14.5 cm.
36,124
Complete system with chamber, safety lid, UV transparent gel
tray, 2 combs (18 wells, 1.0 mm thick)
025-210
Gel casting system M
025-299
Compact M system
7,478
Casting chamber for gel tray 12.4 cm x 14.5 cm
41,827
Consisting of Compact M (025-200) and gel casting
system M (025-210)
Compact M - accessories & combs
Combs, 1.0 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-201
11 wells, 36 µl/well
3,683
025-202
13 wells, 30 µl/well, multichannel pipet compatible, 9 mm spacing
3,683
025-203
18 wells, 20 µl/well
3,683
025-204
21 wells, 16 µl/well
3,683
025-205
25 wells, 12 µl/well, multichannel pipet compatible,
3,683
4.5 mm spacing
Compact M - accessories & combs (continued)
Combs, 1.5 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-216
Preparative comb: 1 well (594 µl) plus 2 marker wells (30 µl/well)
3,683
025-211
11 wells, 54 µl/well
3,683
025-212
13 wells, 45 µl/well, multichannel pipet compatible, 9 mm spacing
3,683
025-213
18 wells, 30 µl/well
3,683
025-214
21 wells, 24 µl/well
3,683
025-215
25 wells, 18 µl/well, multichannel pipet compatible,
3,683
4.5 mm spacing
Gel trays
025-221
Gel tray for 12.4 cm x 14.5 cm gel size, UV transparent, 3 comb
8,867
positions with 4.5 cm distance, 4 comb positions with 3.3 cm
distance
Compact L
025-300
Compact L with gel tray for gel size 23.9 cm x 20.0 cm.
53,235
Complete system with chamber with leveling feet and gauge,
safety lid, UV transparent gel tray, 3 combs (36 wells,
1.0 mm thick)
025-310
Gel casting system L/XL
17,618
Gel caster with leveling feet and gauge for gel tray
23.9 cm x 20.0 cm and gel tray 23.9 cm x 25.0 cm
025-399
Compact L system
69,712
Consisting of Compact L (025-300) and gel casting
system L/XL (025-310)
Compact XL
025-400
Compact XL with gel tray for gel size 23.9 cm x 25.0 cm.
54,502
Complete system with chamber with leveling feet and gauge,
safety lid, UV transparent gel tray, 4 combs (26 well,
1.5 mm thick)
025-310
Gel casting system L/XL
17,618
Gel caster with leveling feet and gauge for gel tray
23.9 cm x 20.0 cm and gel tray 23.9 cm x 25.0 cm
025-499
Compact XL system
70,980
Consisting of Compact XL (025-400) and gel casting
system L/XL (025-310)
Compact L and Compact XL - accessories & combs
Combs, 1.0 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-301
21 wells, 36 µl/well
4,229
025-302
26 wells, 30 µl/well, multichannel pipet compatible, 9 mm spacing
4,229
025-303
36 wells, 20 µl/well
4,229
025-304
42 wells, 16 µl/well
4,229
025-305
52 wells, 12 µl/well, multichannel pipet compatible, 4.5 mm spacing
4,229
Combs, 1.5 mm thick (Note: volumes mentioned refer to 5mm thick gels)
025-316
Preparative comb: 1 well (1284 µl) plus 2 marker wells (30 µl/well)
4,229
025-311
21 wells, 54 µl/well
4,229
025-312
26 wells, 45 µl/well, multichannel pipet compatible, 9 mm spacing
4,229
025-313
36 wells, 30 µl/well
4,229
025-314
42 wells, 24 µl/well
4,229
025-315
52 wells, 18 µl/well, multichannel pipet compatible,
4,229
4.5 mm spacing
Gel trays
025-320
Gel tray for 23.9 cm x 20.0 cm gel size, UV transparent,
9,822
6 comb positions with 3.1 cm distance
025-321
Gel tray for 23.9 cm x 25.0 cm gel size, UV transparent,
8 comb positions with 3.0 cm distance
Horizon 58 - systems
10,504
41060039
Horizon 58 (EU version), complete system with chamber
40,560
(WxLxH = 15.2x24.0x7.0 cm), power cords, safety interlock lid,
heat resistant gel tray 5.7 x 8.3 cm with 3 visualisation strips,
2 aluminium gel casting dams, 1 x 8 tooth comb (0.8 mm thick),
1 x 14 tooth comb (0.8 mm thick), removable buffer tray and
41060013
manual.
Horizon 58 (USA version) dto., but with power cords USA version
39,292
21065040
Horizon 58 Gel Casting System, complete with stand-alone
16,477
molded casting tray (W x L x H = 10 x 20.4 x 4.5 cm),
1 removable gel tray, with 3 visualisation strips, 2 acrylic gel
casting dams and manual. (Combs are sold separately.)
Horizon 58 - accessories, spare parts & combs
Combs, 0.8 mm
21065099
Comb 5 tooth, 0.8 mm thick, 30 µl per slot (for 5 mm thick gels)
2,592
21065073
Comb 8 tooth, 0.8 mm thick, 15 µl per slot (for 5 mm thick gels)
2,592
21065115
Comb 14 tooth, 0.8 mm thick, 7 µl per slot (for 5 mm thick gels)
2,592
Combs, 1.5 mm
21065131
Comb 1 tooth + 2 tooth for marker lanes, 1.5 mm thick, 250 µl per
2,592
preparative slot (calculated for 5 mm thick gels)
21065107
Comb 5 tooth, 1.5 mm thick, 50 µl per slot (for 5 mm thick gels)
2,592
21065081
Comb 8 tooth, 1.5 mm thick, 25 µl per slot (for 5 mm thick gels)
2,592
11951142
Comb 12 tooth, 1.5 mm thick, 15 µl per slot (calculated for 5 mm
2,592
thick gels), microplate compatible, 4.5 mm spacing
21065123
Comb 14 tooth, 1.5 mm thick, 13 µl per slot (for 5 mm thick gels)
2,592
Accessories & spare parts
21065164
Gel Tray Horizon 58 / Sunrise 58 5.7 x 8.3 cm with 3 visualisation
21065032
Gel Tray Horizon 58 5.7 x 8.3 cm with 4 visualisation strips (for
3,547
strips
3,683
older Horizon 58 units)
21065057
Acrylic Gel Casting Dams (pair) for use with casting system sold
5,457
before 2003
21065065
Aluminium Gel Casting Dams without gaskets (pair)
2,319
11099041
Power Cords, USA version (pair)
4,365
11099025
Power Cords, EU version (pair)
6,139
21059027
Electrode Replacement Horizon 58 (1 Electrode/pkg)
21065024
Removable buffer tray
11950011
Reed Switch Replacement (reed switch only)
1,228
Reed Switch Hardware Replacement Kit (Includes 2 O-rings,
3,138
21065156
2,728
14,324
2 red cap nuts, 2 black cap nuts, 2 rubber washers, 2 electrode
boots, 2 hex nuts, 2 screws, 2 banana plugs, and 2 lock
washers)
21065214
Lid Replacement Horizon 58
5,730
21065149
Hinge Pins Replacement (2/pkg)
1,773
Horizon 11·14 - systems
11068020
Horizon 11·14 (EU version), complete system with chamber
(WxLxH = 21.5x31.5x10.5 cm), power cords, safety interlock
lid, UV-transparent gel tray 11 x 14 cm, 2 aluminium gel
casting dams, 1 x 14 tooth comb (1 mm thick), buffer
recirculation option, adjustable leveling feet, bull’s-eye level
and manual
60,840
11068046
Horizon 11·14 Gel Casting System for 11 x 14 cm gels,
19,012
complete with stand-alone molded casting tray (WxLxH =
17.0x32.0x6.5 cm), 1 UV-transparent gel tray, 2 aluminium
gel casting dams, adjustable leveling feeth and manual
21054010
(Combs are sold separately.)
Blot Transfer Apparatus 11·14, for consistent capillary transfer
19,012
of 11 x 14 cm gels, complete with 1 buffer tray, 1 tray insert,
1 gel restrainer and manual
Horizon 11·14 - accessories, spare parts & combs
Combs, 1.0 mm
11951068
Comb 10 tooth 1.0 mm thick 33 µl per slot (for 5 mm thick gels)
3,274
11951175
Comb 12 tooth 1.0 mm thick 30 µl per slot (for 5 mm thick gels),
3,274
mircoplate compatible, 9 mm spacing
31081011
Comb 14 tooth 1.0 mm thick 20 µl per slot (for 5 mm thick gels)
3,274
11951076
Comb 20 tooth 1.0 mm thick 16 µl per slot (for 5 mm thick gels)
3,274
Combs, 2.0 mm
41086018
Comb 1 tooth + 2 tooth for marker lanes 2.0 mm thick 780 µl per
2,865
prep slot (calculated for 5 mm thick gels)
11951084
Comb 10 tooth 2.0 mm thick 66 µl per slot (for 5 mm thick gels)
3,274
31081029
Comb 14 tooth 2.0 mm thick 40 µl per slot (for 5 mm thick gels)
3,274
11951092
Comb 20 tooth 2.0 mm thick 32 µl per slot (for 5 mm thick gels)
3,274
11951159
Comb 24 tooth 2.0 mm thick 22 µl per slot (for 5 mm thick gels),
3,274
microplate compatible, 4.5 mm spacing
Accessories
11084019
UV-transparent gel tray H11·14 / H5 11 cm x 14 cm
6,412
11068053
Aluminium Gel Casting Dams without gaskets (pair)
2,183
11099041
Power Cords, USA version (pair)
4,365
11099025
Power Cords, EU version (pair)
6,139
11068061
Electrode Replacement H11·14 (1 electrode/pkg)
6,139
Electrode Hardware Repair Kit (Includes 2 rubber washers, 2 hex
2,456
11980059
nuts, 2 electrode boots, 1 red cap nut, 1 black cap nut,
2 banana plugs, and 2 lock washers)
11964129
Leveling Foot Replacement (1/pkg)
1,228
11940012
Quick Connect Fitting Replacement (2/pkg)
1,637
11962024
Quick Connect Port Replacement (2/pkg)
2,046
11962040
Lid Replacement H11·14
7,230
21065149
Hinge Pins Replacement (2/pkg)
1,773
Horizon 20·25 - systems
21069026
Horizon 20·25 (EU version), complete system with chamber
74,782
(WxLxH = 32.0x42.5x12.0 cm), power cords, safety interlock
lid, UV-transparent gel tray 20 x 25 cm, 2 aluminium gel casting
dams, 1 x 20 tooth comb (1 mm thick), buffer recirculation
21069067
option, adjustable leveling feet, bull’s-eye level and manual
Horizon 20·25 Gel Casting System for 20 x 25 cm gels,
31,687
complete with stand-alone molded casting tray (WxLxH =
27.3x37.0x7.5 cm), 1 UV-transparent gel tray, 2 aluminium
gel casting dams, adjustable leveling feet and manual
11056017
(Combs are sold separately)
Blot Transfer Apparatus 20·25, for consistent capillary transfer
of 20 x 25 cm gels, complete with 1 buffer tray, 1 tray insert,
19,012
1 gel restrainer and manual
Horizon 20·25 - accessories, spare parts & combs
Combs, 1.0 mm
11953064
Comb 12 tooth 1.0 mm thick 54 µl per slot (for 5 mm thick gels)
3,410
11953072
Comb 15 tooth 1.0 mm thick 40 µl per slot (for 5 mm thick gels)
3,410
41007014
Comb 20 tooth 1.0 mm thick 27 µl per slot (for 5 mm thick gels)
3,410
11951183
Comb 21 tooth 1.0 mm thick 30 µl per slot (for 5 mm thick gels),
3,410
microplate compatible, 9 mm spacing
11951043
Comb 30 tooth 1.0 mm thick 20 µl per slot (for 5 mm thick gels)
3,410
11951191
Comb 42 tooth 1.0 mm thick 11 µl per slot (for 5 mm thick gels),
3,410
microplate compatible, 4.5 mm spacing
Combs, 2.0 mm
11953080
Comb 12 tooth 2.0 mm thick 108 µl per slot (for 5 mm thick gels)
3,410
11953098
Comb 15 tooth 2.0 mm thick 80 µl per slot (for 5 mm thick gels)
3,410
41007022
Comb 20 tooth 2.0 mm thick 54 µl per slot (for 5 mm thick gels)
3,410
11951019
Comb 30 tooth 2.0 mm thick 40 µl per slot (for 5 mm thick gels)
3,410
11951167
Comb 42 tooth 2.0 mm thick 22 µl per slot (for 5 mm thick gels),
3,410
microplate compatible, 4.5 mm spacing
Combs, 3.0 mm
61010021
Comb 1 tooth + 2 tooth for marker lanes 3.0 mm thick 2100 µl per
3,001
prep. slot (calculated for 5 mm thick gels)
41007030
Comb 20 tooth 3.0 mm thick 81 µl per slot (for 5 mm thick gels)
3,410
11951050
Comb 30 tooth 3.0 mm thick 60 µl per slot (for 5 mm thick gels)
3,410
Accessories & spare parts
31006026
UV-transparent Gel Tray H20·25 / H4 20 cm x 25 cm
10,777
21069059
Aluminium Gel Casting Dams without gaskets (pair)
4,911
11099041
Power Cords, USA version (pair)
4,365
11099025
Power Cords, EU version (pair)
6,139
21069042
Electrode Replacement H20·25 (1 electrode/pkg)
5,457
11980059
Electrode Hardware Repair Kit (Includes 2 hex nuts, 2 electrode
2,456
boots, 1 red cap, 1 black cap, 2 banana plugs, and 2 lock
washers)
11964129
Leveling Foot Replacement (1/pkg)
1,228
11940012
Quick-Connect Fitting Replacement (2/pkg)
1,637
11962024
Quick-Connect Port Replacement (2/pkg)
2,046
21069083
Gasket Wedge Repair Kit (pair)
11962032
Lid Replacement H20·25
8,731
21065149
Hinge Pins Replacement (2/pkg)
1,773
955
Rotaphor
Rotaphor - system
021-100
Rotaphor System (115V/230V). Electrophoresis chamber with
POR
electrode rotor, Gel casting system, PC with Rotaphor interface
card, Rotaphor 6.0 software (installed), Power supply with PC
interface, connection cables, manual. German OS
021-190
Rotaphor System (115V/230V). Electrophoresis chamber with
POR
electrode rotor, Gel casting system, PC with Rotaphor interface
card, Rotaphor 6.0 software (installed), Power supply with PC
interface, connection cables, manual. English OS
043-400
Refrigerated Circulator KH-5 (Thermostat), 230 V
328,765
Rotaphor - accessories & combs
021-011
Comb for 20 x 20 cm gels, 18 teeth
8,867
021-004
Comb for 20 x 20 cm gels, 25 teeth
8,867
021-005
Comb for 20 x 20 cm gels, 40 teeth
8,867
021-006
Comb for 20 x 20 cm gels, 50 teeth
8,867
021-007
Comb for 20 x 20 cm gels, 18 teeth
8,867
(for application of liquid samples)
021-008
Comb for 18 x 13 cm gels, 5 teeth
8,867
021-009
Comb for 18 x 13 cm gels, 12 teeth
8,867
021-010
Comb for 18 x 13 cm gels, 20 teeth
8,867
021-003
Sample casting form (for 20 embedded samples,
8,867
14 x 10 x 1 mm each)
021-001
Kit for preparative gels
50,201
021-002
Gel tray (20 x 20 cm gels) and casting frame
42,835
PFGE size standards
021-021
Saccharomyces cerevisiae St. YPH 149 (minimum 80 lanes)
11,459
021-023
Schizosaccharomyces pombe (minimum 80 lanes)
11,459
TGGE
TGGE - system
024-000
TGGE System, 230/115 V. electrophoresis unit with high
POR
precision gradient block, 2 buffer chambers for variable
positioning, controller with integrated power supply,
manual, starter kit (024-003)
TGGE - accessories
024-003
TGGE Starter Kit for 25 gels, inlcuding glass plate 1 slot
50,201
( 024-023), glass plate 8 slots (024-022), glass plate 12 slots
(024-025), 3 cover plates (024-021), 100 buffer wicks (024-015),
25 Polybond films, sample AcrylGlide, 3 plastic clips
024-022
TGGE glass plate, 8 slots (5 µl), 4x3x0.4 mm
10,504
024-023
TGGE glass plate, 1 slot (50 µl), 40x3x0.4 mm
10,504
024-024
TGGE glass plate, 1 diagonal slot (75 µl), 62x3x0.4 mm
10,504
024-025
TGGE glass plate, 12 slots (3 µl), 3x2x0.4 mm
10,504
024-026
TGGE glass plate, 18 slots (1 - 2 µl), 2x2x0.4 mm
11,459
024-027
TGGE glass plate, with 0.5 mm spacer, no slots
6,412
024-021
TGGE bonding plate, without spacers
2,319
024-015
TGGE buffer wicks, 7 x 7 cm, 100/pkg
6,412
024-030
TGGE PolyBond film, 8.8 x 8.8 cm, 25/pkg
7,367
024-034
TGGE PolyBond film, 8.8 x 8.8 cm, 100/pkg
26,465
024-031
TGGE cover plate + 10 hydrophobic cover films
3,820
024-032
TGGE hydrophobic cover film, 7 x 6 cm, 25/pkg
3,820
024-035
TGGE hydrophobic cover films, 100/pkg
8,321
024-121
TGGE self-adhesive slotformers (10 x multi-well, 9 x long-well)
8,731
024-050
Testkit for TGGE and TGGE Maxi including 40µl wildtype DNA,
15,006
40µl mutant DNA, 400µl heteroduplex DNA, 1ml loading buffer,
manual
024-028
TGGE casting stand for 5 gels
024-040
TGGE clean gels, 8.3 x 8.8cm, 13 slots (5µl), 10 gels
23,600
024-001
TGGE controller and power supply, 230V/115V
350,592
024-002
TGGE electrophoresis unit
350,592
024-010
TGGE buffer chamber (cathode)
32,740
024-011
TGGE buffer chamber (anode)
32,740
11,595
TGGE MAXI - system
024-200
TGGE MAXI System, 230/115 V. Electrophoresis unit with high
POR
precision gradient block, 2 buffer chambers for variable
positioning, controller, power supply, manual, MAXI starter
kit (024-004)
TGGE MAXI - accessories
024-204
TGGE MAXI Starter Kit for 25 gels, including glass plate 1 slot
64,525
(024-228), glass plate 32 slots (024-229), 2 cover plates
(024-227), 2 sealings (024-230), 25 cover films (024-232),
25 Polybond films (024-234), 4 buffer wicks (024-216),
sample AcrylGlide, 12 binder clips
024-221
TGGE MAXI glass plate, without spacer 23.5 x 23.5 cm
4,093
024-227
TGGE MAXI glass plate, with spacer, no slot former
9,958
024-228
TGGE MAXI glass plate perpendicular, spacer (1 mm)
10,504
and 1 slot (75 µl)
024-229
TGGE MAXI glass plate parallel, spacer (1 mm) and 32 slots (5 µl)
024-230
TGGE MAXI silicone sealing for gel casting, 1 mm
12,005
024-232
TGGE MAXI gel cover film, 25/pkg
3,820
024-234
TGGE MAXI Polybond film, 25/pkg
17,734
024-235
TGGE MAXI Polybond film, 100/pkg
68,209
024-222
TGGE MAXI self-adhesive slotforming units for parallel gels
2,865
1,501
(8 strips with 28 x 5µl each and 9 x 200µl)
024-216
TGGE MAXI buffer wicks re-usable, 4 pcs.
024-240
TGGE MAXI clean gels, 23.3 x 11.5cm, 42 slots (5µl), 5 gels
024-223
TGGE MAXI Applicator strip, silicone, 34 slots for 8 µl
2,865
14,733
5,730
(for use with 024-227)
024-201
TGGE MAXI controller
024-202
TGGE MAXI elpho chamber
024-203
TGGE MAXI power supply
358,777
POR
117,319
Sequencing
Model S2 - systems
21105036
Model S2 Sequencing Gel Electrophoresis Apparatus
(EU version), Gel dimension: 31 x 38,5 cm (WxH), 0.4-mm
169,157
thick gel. Complete with power cords; four 14-cm 0.4-mm
vinyl sharkstooth combs, set of 0.4-mm thick vinyl side spacers;
pair of glass plates; roll of gel sealing tape; surface temperature
monitor; and manual.
21105010
Model S2 Sequencing Gel Electrophoresis Apparatus
(USA version) dto., but with power cords USA version
169,157
21105481
Model S2 including gel casting clamp (EU version)
177,342
21105499
Model S2 including gel casting clamp (USA version)
177,342
Model SA - system
31096027
Model SA-32 Adjustable Sequencing Gel Electrophoresis
System (EU version), Gel dimensions: 17 x 32 xm (WxH),
0.4mm thick gel. Complete with top and base sections:
adjustable leveling feet; leveling indicator; integral gel clamps;
internal buffer drain system; power cords; two 14 cm vinyl
sharkstooth combs; set of 0.4-mm thick spacers; pair of glass
plates; roll of gel sealing tape; surface temperature monitor; and
manual. Note: Model SA Gel Casting Clamp sold separately
220,996
31096019
Model SA-32 Adjustable Sequencing Gel Electrophoresis
System (USA version) dto. but with power cords USA version
227,816
31096415
Model SA-43 Adjustable Sequencing Gel Electrophoresis
System (USA version) dto. but with one extension (Gel
301,482
dimensions: 17 x 43 cm (WxH), 0.4mm thick gel) and
power cords USA version; NOT available in Europe
31096043
Model SA-60 Adjustable Sequencing Gel Electrophoresis
System (EU version) dto. but with one extension (Gel
31096035
Model SA-60 Adjustable Sequencing Gel Electrophoresis
System (USA version) dto. but with power cords USA version
287,840
dimension: 17x60 cm (wxH), 0.4mm thick gel)
301,482
Model SA - extensions & combs
Extensions
31096076
Additional SA Extension (27 cm) for EU and USA
84,579
31096423
SA Extension (11 cm) for USA
50,474
Shark tooth comb, 0.35 mm
21105341
14 cm length, 0.35 mm thick, 25 teeth, 2-4µl/slot, 6 pcs./pkg.
6,412
Shark tooth comb, 0.4 mm
21045018
14 cm length, 0.4 mm thick, 25 teeth, 2-4µl/slot, 6 pcs/pkg.
4,229
21045026
14 cm length, 0.4 mm thick, 49 teeth, 1-2µl/slot, 4 pcs/pkg.
4,229
Square tooth combs, 0.4 mm
11092012
3 teeth; 0.4mm thick; 240µl/central, preparative slot; 1 pc./pkg.
3,956
11092061
12 teeth; 0.4mm thick; 15µl/slot; 1 pc./pkg.
3,956
11092095
18 teeth; 0.4mm thick; 8µl/slot; 1 pc./pkg.
3,956
Square tooth combs, 0.8 mm
11092020
3 teeth; 0.8mm thick; 480µl/central, preparative slot; 1 pc./pkg
3,956
11092079
12 teeth; 0.8mm thick; 30µl/slot; 1 pc./pkg.
3,956
11092103
18 teeth; 0.8mm thick; 16µl/slot; 1 pc./pkg.
3,956
Square tooth combs, 1.6 mm
11092038
3 teeth; 1.6mm thick; 960µl/central, preparative slot; 1 pc./pkg.
3,956
11092087
12 teeth; 1.6mm thick; 60µl/slot; 1 pc./pkg.
3,956
11092111
18 teeth, 1.6mm thick; 32µl/slot; 1 pc./pkg.
3,956
21093083
Spacer set, SA-32; wedge spacer: 0.4-1.2 mm; 2 Spacer
7,230
21093042
Spacer set, SA-32, 0.4mm
3,410
21093059
Spacer set, SA-32, 0.8mm
4,229
21093075
Spacer set, SA-32, 1.6mm
7,230
21093323
Spacer set,SA-43, 0.4mm
3,138
21093133
Spacer set, SA-60; wedge spacer: 0.4-1.2 mm; 2 Spacer
7,639
21093091
Spacer set, SA-60, 0.4mm
7,230
21093109
Spacer set, SA-60, 0.8mm
7,230
21093125
Spacer set, SA-60, 1.6mm
6,412
21093141
Spacer set, SA-88, 0.4mm
6,412
21965017
Spacer foam blocks; 12 Pieces
1,910
Spacer
Model SA - accessories & spare parts
Accessoires
21093067
Glass Plate Set for SA-32; 1 pair
7,367
21093331
Glass plate Set for SA-43, low fluores, 1 pair
26,874
21093356
Glass plate set for SA-43, 1 pair
15,552
21093117
Glass Plate Set for SA-60; 1 pair
9,686
31096324
Gel casting clamp for SA-32; Dimension: 19.7 x 33.8cm; 1 Piece
5,866
31096340
Gel casting clamp for SA-32; Dimension: 19.7 x 33.8cm; 2 Pieces
9,276
11032018
Gel Sealing Tape, 1 roll
11032026
Gel Sealing Tape, 10 rolls
11098019
Clamps for Gel Sandwich; 12 Pieces
21105333
Clamps for Gel Sandwich (stainless); 12 Pieces
21105283
Surface temperature monitor strips; 3 Pieces
4,093
32,058
3,001
10,368
5,593
Spare parts for Sequencing Apparatus Model SA
21965017
Model SA Foam blocks (12/pkg)
31096076
Model SA Extension Section, ~27 cm (For Model SA 60, SA 88)
84,579
1,910
31096423
Model SA Extension Section, 11 cm (For Model SA 43)
50,474
11958352
Model SA Gel Clamp Replacement Kit (spring, shoulder washer,
2,183
washer, tab, knob, support ring)
21047014
Model SA Top Clamp
1,501
11099041
Model SA Power Cords (48in, pair) (USA)
4,365
11099025
Model SA Power Cords (48in, pair) (EU)
6,139
21093034
Model SA Silicone sealing for buffer chamber SA (new gasket as
4,502
31096134
Model SA Upper Buffer Chamber Wire Carrier Replacement
of 7/96 is gray, and is self-adhesive (no glue needed)
6,684
(comes with the wire and the carrier).
31096142
Model SA Lower Buffer Chamber Wire Carrier Replacement
4,502
31096159
Model SA Upper Buffer Chamber Lid Replacement (upper buffer
5,866
lid, four ratchet rivets, two washers)
31096167
Model SA Lower Buffer Chamber Lid Replacement (lower buffer
5,866
lid, four ratchet rivets, two washers)
21105127
Model SA Upper Buffer Chamber Banana Plug Replacement
5,730
(black cap nut, o-ring, banana plug)
21105101
Model SA Lower Buffer Chamber Banana Plug Replacement
6,412
(red cap nut, o-ring, banana plug, red plug block)
31096183
Model SA Drain Hose Replacement
1,910
21120019
Model SA Drain Knob Replacement (knob, four flat washers)
2,319
11964129
Model SA Leveling Foot Replacement
1,228
Power Supplies
Low voltage power supplies
31061104
Model 125 Power Supply (230 V),
21,827
10801017
max. 125 V, 150 mA, 20 W, 1 output
Model PS304 Power Supply (230 V),
64,798
10839017
max. 300 V, 400 mA, 120 W, 2 outputs
Model PS305T Power Supply (230 V),
95,492
040-800
max. 300 V, 500 mA, 150 W, Timer, 2 outputs
Standard Power Pack P25 (115 V / 230 V),
70,937
040-850
max. 400 V, 1000 mA, 200 W, 4 outputs
Standard Power Pack P25T with Timer (115 V / 230 V),
81,850
max. 400 V, 1000 mA, 200 W, 4 outputs
High voltage power supplies
10553003
Model PS3003 HV Power Supply (EU version, 230 V),
max. 3,000 V, 300 mA, 300 W
200,533
10556017
Model PS9009 programmable HV Power Supply (230 V)
241,458
with one dedicated program especially designed for IEF
max. 3000 V, 300 mA, 300 W, Timer, 2 outputs
Power supply adaptors
010-026
Standard safety adaptor set (4 mm / 4 mm), conical, for use with
2,592
sheated 4 mm male plug instrument leads to non-sheated
4 mm Power Supply output jacks
010-027
Safety adaptor set (4 mm / 4 mm), cylindrical, for use with
2,592
sheated 4 mm male plug instrument leads to non-sheated
4 mm Power Supply output jacks
022-007
Safety adaptor set (4 mm / 2 mm), for use with sheated 4 mm
5,047
male plug instrument leads to 2 mm high-voltage Power
Supply output jacks
022-018
Safety adaptor set (2 mm / 4 mm), for use with sheated 2 mm
5,593
male plug instrument leads to sheated 4 mm Power Supply
output jacks
010-031
Safety adaptor (4 mm / 4 mm), special, for use with sheated 4 mm
5,184
male plug instrument leads to recessed 4 mm Bio-Rad Power
Supply output jacks
Blotting
Fastblot - system (for blotting of proteins)
014-100
Fastblot B33, complete system, plasticized carbon electrodes,
63,121
electrode surface 16 x 20 cm,with flow-through cooling,
014-200
incl. manual
Fastblot B34, complete system, plasticized carbon electrodes,
61,854
015-100
electrode surface 16 x 20 cm, without cooling, incl. manual
Fastblot B43, complete system, anode: platinum-coated titanium,
74,782
cathode: stainless steel, electrode surface 16 x 20 cm, with
015-200
flow-through cooling, incl. manual
Fastblot B44, complete system, anode: platinum-coated titanium,
74,782
cathode: stainless steel, electrode surface 16 x 20 cm, without
015-600
cooling, incl. manual
Fastblot B64, complete system, plasticized carbon electrodes,
206,602
electrode surface 23.5 x 38.5 cm, with passive cooling
Fastblot - accessories
3030931
Whatman 3MM Chr, 580 x 680 mm, 0.34 mm thick, 100/pkg
42,289
3017915
Whatman 17Chr, 460 x 570 mm, 0.92 mm thick, 25/pkg
26,874
10426981
Whatman GB005, 200 mm x 200 mm, 1.2 mm thick, 25/pkg
9,549
013-300
Tankblot - system (for blotting of proteins)
Tankblot, complete instrument with integrated cooling jacket,
110,272
1 gel cassette for up to four 10 x 10 cm gels, 2 fixation rings,
2 fiber pads and manual
Tankblot - accessories
013-301
Gel cassette for up to four 10 x 10 cm gels
013-302
Fixation rings for gel cassette, 2/pkg
26,874
1,255
013-303
Fiber pads, 2/pkg
1,637
Mini V8·10 - blot module (for blotting of proteins)
21078019
Mini-V 8·10 Blot Module, complete with blot restainer, blot support
frame, clamping knob, three transfer pressure pads and manual
40,243
Mini V8·10 - accessories for blot module
11958048
Transfer pressure pad, 6/pkg
3030931
Whatman 3MM Chr, 580 x 680 mm, 0.34 mm thick, 100/pkg
42,289
3,274
3017915
Whatman 17 Chr, 460 x 570 mm, 0.92 mm thick, 25/pkg
26,874
10426981
Whatman GB005, 200 mm x 200 mm, 1.2 mm thick, 25/pkg
9,549
10426994
Whatman GB005, 580 mm x 580 mm, 1.2 mm thick, 25/pkg
19,917
053-000
Vacu-Blot - system (for blotting of nucleic acids)
Vacu-Blot System for blots up to 20 x 20 cm, 230 V. Complete
95,062
system consisting of transfer unit, 3 rubber sheets, 8 clips,
membrane vacuum pump MP86 with manometer, adjustable
053-100
vacuum gauge, tubing and manual
Vacu-Blot without pump , incl. 3 rubber sheets, 8 clips, tubing
55,136
and manual
Vacu-Blot - accessories
053-002
Rubber sheets (280 x 280 mm) for Vacu-Blot, 3 pieces
6,821
053-004
Porous filter plate for Vacu-Blot
6,821
010-007
Clips (1 set), 3 pieces
3030931
Whatman 3MM Chr, 580 x 680 mm, 0.34 mm thick, 100/pkg
832
42,289
Membrane pump
049-000
Membrane vacuum pump MP86 with manometer and
42,971
adjustable vacuum gauge, 230 V
Dot Blot - system (for blotting of nucleic acids and proteins)
053-400
Dot Blot 96 System (EU version, 230 V). complete system
121,680
consisting of transfer unit, 1 sealing sheet, membrane vacuum
pump MP86 with manometer, adjustable vacuum gauge,
053-401
tubing and manual
Dot Blot 96 without pump , incl. 1 sealing sheet, tubing
83,655
and manual
Dot Blot - accessories
053-402
Silicone sealing sheet
18,143
3030931
Whatman 3MM Chr, 580 x 680 mm, 0.34 mm thick, 100/pkg
42,289
Membrane pump
049-000
Membrane vacuum pump MP86 with manometer and adjustable
42,971
21052014
vaccuum gauge, 230 V
Hybri·Slot 24, complete filtration manifold with vacuum (bottom)
27,283
block, middle block, engraved top block, 4 tri-wing bolts
and manual
Hybri Dot - accessories
Membrane Pump
049-000
Membrane vacuum pump MP86 (230 V, 50 Hz) with adjustable
42,971
vacuum gauge and manometer, end vacuum 100 mbar,
max. delivery 6 l / min.
049-001
Vacuum tubing for MP86 (1m)
049-201
Separator (Woulff's bottle) for connecting to MP26 und MP86
The Convertible - system (bloting of nucl. acids & proteins)
The Convertible base plate with storage case
11055019
1,637
20,053
35,468
Top Plates (max. volume per well)
11055225
96-Well, 3 mm Dot, with gasket and storage case (450 µl)
23,873
11055035
96-Well, 6 mm Dot, with gasket and storage case (700 µl)
33,695
11055050
48-Well, 1.0 x 4.0 mm Slot, with gasket and storage case (750 µl)
24,282
11055068
48-Well, 0.75 x 7.5 mm Slot, with gasket and storage
23,464
case (1,000 µl)
Accessories
11055043
96-Well, 3 mm Dot gasket
12,005
11055142
96-Well, 6 mm Dot gasket
13,505
11055076
48-Well, 1.0 x 4.0 mm Slot gasket
12,005
11055084
48-Well, 0.75 x 7.5 mm Slot gasket
12,414
Membrane Pump
049-000
Membrane vacuum pump MP86 (230 V, 50 Hz) with adjustable
42,971
vacuum gauge and manometer, end vacuum 100 mbar, max.
delivery 6 l / min.
049-001
Vacuum tubing for MP86 (1m)
049-201
Separator (Woulff's bottle) for connecting to MP26 und MP86
1,637
20,053
Gel imaging systems
UVsolo
033-100
UVsolo. Monochrome ½´´ CCD camera, resolution 752 x 575
POR
pixels, motorised zoom lens 11.5 x 69 mm, UV bandpass
filter for EtBr, darkroom with 5.6´´ LCD screen, key-pad, drive
for CF card, network card, safety interlocking door, pullout
transilluminator (312 nm, 20 cm x 20 cm, 70 %/100 % intensity
033-101
switch), port for video printer, 230 V
UVsolo 2. Dto., but with UV table filter size 21 cm x 26 cm
POR
033-110
UVsolo L. Monochrome CCD camera, resolution 752 x 575
POR
pixels, manual zoom lens 8 - 48 mm, UV bandpass filter for
EtBr, darkroom, safety interlocking door, pullout transilluminator
(312 nm, 20 cm x 20 cm, 70 %/100 % intensity switch),
controller with key-pad, drive for CF card, network card, 9´´ video
033-111
monitor, port for video printer, 230 V
UVsolo L2. Dto., but with UV table filter size 21 cm x 26 cm
POR
Accessories
033-109
UV protection shield
17,461
057-008
UV converter plate for UVsolo, UVIprchemi, and UVIchemi.
32,058
For application on a UV transilluminator for documentation of
031-919
colour stains, 24 cm x 30 cm; light yellow
Thermal video printer Mitsubishi P93E. High resolution
118,683
(325 dpi), 256 grey scales, with wired remote control
031-985
Thermal printer paper KP65HM, high contrast, 4 rolls à 21 m
031-986
Thermal printer paper KP91HG, high glossy, 4 rolls à 18 m
9,140
11,868
Software
035-004
BioDocAnalyze (BDA) software. Analysis software for gel
175,978
images in tif, jpg, bmp or Biometra specific BD1 format
Note: price is valid only when ordered together with Uvsolo
BDAdigital - system (order code 034-…)
BDAdigital core set. Digital camera (at least 8 million pixels,
034-000
request for current technical specifications), lens adapter,
395,609
camera power supply, UV filter for ethidium bromide stains,
BDA software for image acquisition (minimum field of view:
10 cm x 10 cm) and gel analysis. For installation on an
existing computer (Minimum requirements: processor
034-050
1.2 GHz, 128 MB RAM, WinXP/2000).
BDAdigital compact. BDAdigital core set 034-000, small
POR
034-312
darkhood BDR1 with anti-theft camera fixation.
BDAdigital system 20. BDAdigital core set (034-000),
POR
BDA Box 2 (034-802), transilluminator UVstar 20 (057-503;
20cm x 20cm filter size), PC with WinXP in English (034-913),
19" TFT (035-923), thermal printer printer (031-920),
034-313
UV converter plate (057-005)
BDAdigital system 30. BDAdigital core set (034-000),
POR
BDA Box 2 (034-802), transilluminator UVstar 30 (057-603;
23cm x 30cm filter size), PC with WinXP in English (034-913),
19" TFT (035-923), thermal printer printer (031-920),
034-302
UV converter plate (057-005)
BDAdigital system 20, dto. but PC with WinXP in German
POR
034-303
BDAdigital system 30, dto. but PC with WinXP in German
POR
PC for BDA digital
034-913
PC WinXP professional, english OS, for BDAdigital.
133,689
Incl. software installation.
BDAvideo - system
035-000
BDAvideo core set. Monochrome 1/2" CCD camera, resolution
485,645
752(h) x 582(w) pixels, manual zoom lens 8 - 48 mm
(F1 - F1.2), 8 bit, 256 grey scales, close-up lens, UV filter for
ethidium bromide stains, digization card, BDA software
for image acquisition and gel analysis. For installation on an
existing computer (Minimum requirements: WinXP/2000/98/NT).
035-002
BDAvideo core set without digitization card.
035-312
Important note: only for orders with a PC (035-911).
BDAvideo system 20. BDAvideo core set (035-000),
411,979
POR
BDA Box 2 (032-802), transilluminator UVstar 20 (057-503;
20cm x 20cm filter size), PC with WinXP in English,
19" TFT (035-923), thermal printer printer (031-920),
035-313
UV converter plate (057-005)
BDAvideo system 30. BDAvideo core set (035-000),
POR
BDA Box 2 (032-802), transilluminator UVstar 30 (057-603;
23cm x 30cm filter size), PC with WinXP in English,
19" TFT (035-923), thermal printer printer (031-920),
035-302
UV converter plate (057-005)
BDAvideo system 20, dto. but PC with WinXP in German
POR
035-303
BDAvideo system 30, dto. but PC with WinXP in German
POR
PC for BDAvideo
035-911
PC WinXP professional, english OS, for BDAvideo. Incl.
245,551
installed frame grabber! Can be ordered only together
with 035-002!
BDA liveH - system
032-001
BDA liveH core set. Digital monochrome 1/2" CCD camera,
resolution 1392 x 1040 pixels, manual zoom lens 8 - 48 mm
POR
(F1.0-1.2), FireWire PCI card, UV filter for ethidium bromide
stains, BioDocAnalyze software for image acquisition and gel
analysis (2 licenses).
032-312
BDA liveH system 20. BDA liveH core set (032-001),
POR
BDA Box 2 (032-802), transilluminator UVstar 20 (057-503;
20cm x 20cm filter size), PC with WinXP in English,
19" TFT (035-923), thermal printer printer (031-920),
032-313
UV converter plate (057-005)
BDA liveH system 30. BDA liveH core set (032-001),
POR
BDA Box 2 (032-802), transilluminator UVstar 30 (057-603;
23cm x 30cm filter size), PC with WinXP in English,
19" TFT (035-923), thermal printer printer (031-920),
032-302
UV converter plate (057-005)
BDA liveH system 20, dto. but PC with WinXP in German
POR
032-303
BDA liveH system 30, dto. but PC with WinXP in German
POR
PC for BDA liveH
032-911
PC WinXP professional, english OS, for BDA liveH.
135,053
Incl. FireWire card and software installation.
Stand and darkhoods (without transilluminator)
031-908
Stand. Height adjustable
034-801
BDA Box 1 with fixation for BDAdigital camera.
49,792
216,903
Darkhood (52cm x 54cm x 51 cm, HxWxD), epi-white light,
UV protection shield, for integration of a transilluminator with
032-801
max. footprint of 42.5cm x 43.0cm (WxD) - like Uvstar
BDA Box 1, dto. but for BDAvideo or BDA live H camera
216,903
034-802
BDA Box 2 with fixation for BDAdigital camera.
266,013
Darkhood (52cm x 54cm x 51 cm, HxWxD), epi-white light,
4-position filter-wheel, UV protection shield, drawer
032-802
for transilluminator (not inlcuded - models see below)
BDA Box 2, dto. but for BDAvideo or BDA live H camera
266,013
034-803
BDA Box 3 with fixation for BDAdigital camera.
339,678
Darkhood (52cm x 54cm x 51 cm, HxWxD), epi-white light,
epi-UV light (245nm, 365nm), 4-position filter-wheel,
UV protection shield, drawer for transilluminator like UVstar
032-803
(see below)
BDA Box 3, dto. but for BDAvideo or BDA live H camera
339,678
Transilluminators for BDA Box
With high-grade filter
057-503
UVstar 20. Filter size 20cm x 20cm, 8x8 W UV bulbs (312 nm),
99,584
057-513
50 or 100% intensity switch, without UV protection shield
UVstar 20i. Filter size 20cm x 20cm, 8x8 W UV bulbs (312 nm),
141,874
057-603
10 - 100% intensity setting, without UV protection shield
UVstar 30. Filter size 23cm x 30cm, 12x8 W UV bulbs (312 nm),
133,689
057-613
50 or 100% intensity switch, without UV protection shield
UVstar 30i. Filter size 23cm x 30cm, 12x8 W UV bulbs (312 nm),
163,700
10 - 100% intensity setting, without UV protection shield
With Super Brilliant filter
057-523
UVstar 20 plus. Filter size 20cm x 20cm, 8x8 W UV bulbs
167,793
(312 nm), 50 or 100% intensity switch, without UV protection
057-533
shield
UVstar 20i plus. Filter size 20cm x 20cm, 8x8 W UV bulbs
189,620
(312 nm), 10 - 100% intensity setting, without UV protection
057-623
shield
UVstar 30 plus. Filter size 23cm x 30cm, 12x8 W UV bulbs
207,354
(312 nm), 50 or 100% intensity switch, without UV protection
057-633
shield
UVstar 30i plus. Filter size 23cm x 30cm, 12x8 W UV bulbs
230,545
(312 nm), 10 - 100% intensity setting, without UV protection
shield
Gel imaging - further components
Accessories
035-923
19" TFT monitor
031-920
Thermal printer Mitsubishi P93DW. Resolution 325 dpi, 256 grey
40,243
122,775
scales, 8 bit, versatile setting functions, USB2.0 port,
Win2000/XP drivers. Incl. USB printer cable
031-985
Mitsubishi thermal paper KP65HM. For thermal printer Mitsubishi
9,140
P93E/P93DW. 4 rolls per 21 m
031-986
Mitsubishi thermal paper KP91HG-CE, high glossy. For
11,868
thermal printer Mitsubishi P93E/P93DW. 4 rolls per 18 m
031-994
Sony thermal paper UPP-110HG, high glossy, for thermal
16,234
printer Sony UP-D890/895, 5 rolls per 18 m
057-005
UV converter plate for BDA. For application on a UV transillu-
27,965
minator for documentation of colour stains, 24 cm x 30 cm;
light yellow.
034-011
Bandpass filter for ethidium bromide stains. Already included in
27,147
all BDA systems. Transmission maximum 590 nm
034-012
Bandpass filter for SYBR Green stains. Transmission
36,833
maximum 520 nm
035-028
Close-up lens +1, 55 mm diameter.
4,093
030-909
Flexible keyboard protection for computer keyboard as
3,683
protection in lab routine
Software
035-004
BioDocAnalyze (BDA) software. Software for gel analysis
199,169
(fragment size, mass, RF,...) of gel images in tif, jpg, bmp, or
Biometra-specific BD1 format, Software + Dongle (already
included in all BDA core sets and systems)
035-905
Additional licence BDA gel analysis. Serial number of the first
81,850
licence dongle must be provided
035-907
Additional licence BDA gel analysis (minimum order quantity: 3x).
62,070
Additional dongle. Serial number of the first licence dongle must
be provided
035-114
Similarity Analysis Module. Software module for cluster and RFLP
256,464
analysis as upgrade for BDA software 035-004
035-014
BDA demo software. Software CD (without dongle = Demo version)
1,637
Chemiluminescence systems
UVIchemi
036-000
UVIchemi. Darkroom with cooled 12 bit camera, 1,3 MP, fixed
POR
focal length, sample tray (max. blot size 21cm x 18cm),
epi-LED lights, image acquisition software
036-911
PC for UVIchemi. Windows XP, English, incl. Installation
(FireWire card, software)
135,053
UVIprochemi
036-101
UVIprochemi. Cooled digital 12 bit camera, resolution
POR
1.280 x 1,024 (H x V) pixels, motorzoom lens,
UV filter, darkroom with UV table 21 x 26 cm on slider,
036-100
epi white light, image acquisition, software
UVIprochemi. Dto. Plus epi-UV light (254/365 nm)
036-913
PC for UVIchemi. Windows XP, English, incl. Installation
POR
135,053
(FireWire card, motorzoom PCI card, software)
Chemiluminescence Systems - further components
Accessories
035-923
19" TFT monitor
031-920
Thermal printer Mitsubishi P93DW. Resolution 325 dpi, 256 grey
40,243
122,775
scales, 8 bit, versatile setting functions, USB2.0 port,
Win2000/XP drivers. Incl. USB printer cable
031-985
Mitsubishi thermal paper KP65HM. For thermal printer Mitsubishi
9,140
P93E/P93DW. 4 rolls per 21 m
031-986
Mitsubishi thermal paper KP91HG-CE, high glossy. For
11,868
thermal printer Mitsubishi P93E/P93DW. 4 rolls per 18 m
057-008
UV converter plate for UVsolo, UVIprochemi, and UVIchemi.
32,058
For application on a UV transilluminator for documentation of
colour stains, 24 cm x 30 cm; light yellow
Software
035-004
BioDocAnalyze (BDA) software. Software for gel analysis
199,169
(fragment size, mass, RF,...) of gel images in tif, jpg, bmp, or
Biometra-specific BD1 format, Software + Dongle (already
included in all BDA core sets and systems)
035-905
Additional licence BDA gel analysis. Serial number of the first
81,850
licence dongle must be provided
035-907
Additional licence BDA gel analysis (minimum order quantity: 3x).
62,070
Additional dongle. Serial number of the first licence dongle must
be provided
035-114
Similarity Analysis Module. Software module for cluster and RFLP
256,464
analysis as upgrade for BDA software 035-004
035-014
BDA demo software. Software CD (without dongle = Demo version)
1,637
Transilluminators
Transilluminators with 50 or 100 % intensity switch
057-400
UVstar 15 transilluminator, filter size 15 cm x 15 cm, 6 x 8 W UV
90,035
bulbs (312 nm), 50 or 100 % intensity switch, UV protection shield
057-401
dto., but wavelength 254 nm
90,035
057-402
dto., but wavelength 365 nm
UVstar 20 transilluminator, filter size 20 cm x 20 cm, 8 x 8 W UV
90,035
057-500
105,041
bulbs (312 nm), 50 or 100 % intensity switch, UV protection
shield
057-501
dto., but wavelength 254 nm
105,041
057-502
dto., but wavelength 365 nm
UVstar 30 transilluminator, filter size 23 cm x 30 cm, 12 x 8 W
105,041
057-600
137,781
UV bulbs (312 nm), 50 or 100 % intensity switch, UV protection
shield
057-601
dto., but wavelength 254 nm
137,781
057-602
dto., but wavelength 365 nm
UVstar WL transilluminator, filter size 20 cm x 20 cm, 6 x 8 W
137,781
057-700
144,602
UV bulbs (312 nm) + white light filter size 20 cm x 20 cm,
6 x 8 W white light bulbs, 50 or 100 % UV intensity switch,
UV protection shield
057-701
dto., but UV wavelength 254 nm
144,602
057-702
dto., but UV wavelength 365 nm
144,602
Transilluminators with 10 - 100 % intensity control
057-410
UVstar 15i transilluminator, filter size 15 cm x 15 cm, 6 x 8 W
118,683
UV bulbs (312 nm), 10 - 100 % intensity setting, UV protection
shield
057-411
dto., but wavelength 254 nm
118,683
057-412
dto., but wavelength 365 nm
UVstar 20i transilluminator, filter size 20 cm x 20 cm, 8 x 8 W
118,683
057-510
145,966
UV bulbs (312 nm), 10 - 100 % intensity setting, UV protection
shield
057-511
dto., but wavelength 254 nm
145,966
057-512
dto., but wavelength 365 nm
UVstar 30i transilluminator, filter size 23 cm x 30 cm, 12 x 8 W
145,966
057-610
169,157
UV bulbs (312 nm), 10 - 100 % intensity setting, UV protection
shield
057-611
dto., but wavelength 254 nm
169,157
057-612
dto., but wavelength 365 nm
UVstar WLi transilluminator, filter size 20 cm x 20 cm, 6 x 8 W
169,157
057-710
181,435
UV bulbs (312 nm) + white light filter size 20 cm x 20 cm,
6 x 8 W white light bulbs, 10 - 100 % UV intensity setting,
UV protection shield
057-711
dto., but UV wavelength 254 nm
181,435
057-712
dto., but UV wavelength 365 nm
181,435
Transilluminators with Super Brilliant filter and 50 or 100 % intensity switch
057-520
UVstar 20 plus transilluminator, filter size 20 cm x 20 cm,
171,885
8 x 8 W UV bulbs (312 nm), 50 or 100 % intensity switch,
UV protection shield
057-522
057-620
dto., but wavelength 365 nm
UVstar 30 plus transilluminator, filter size 23 cm x 30 cm,
171,885
211,446
12 x 8 W UV bulbs (312 nm), 50 or 100 % intensity switch,
UV protection shield
057-622
dto., but wavelength 365 nm
211,446
Transilluminators with Super Brilliant filter and 10 - 100 % intensity control
057-530
UVstar 20i plus transilluminator, filter size 20 cm x 20 cm,
193,712
8 x 8 W UV bulbs (312 nm), 10 - 100 % intensity control,
UV protection shield
057-532
057-630
dto., but wavelength 365 nm
UVstar 30i plus transilluminator, filter size 23 cm x 30 cm,
193,712
234,637
12 x 8 W UV bulbs (312 nm), 10 - 100 % intensity setting,
UV protection shield
057-632
dto., but wavelength 365 nm
234,637
Transilluminators - continued
Transilluminators for BDA Box with conventional filter - without UV protection shield!
057-503
UVstar 20 but w/o UV protection shield
99,584
057-513
UVstar 20i but w/o UV protection shield
141,874
057-603
UVstar 30 but w/o UV protection shield
133,689
057-613
UVstar 30i but w/o UV protection shield
163,700
Transilluminators for BDA Box with Super Brilliant filter - without UV protection shield!
057-523
UVstar 20 plus but w/o UV protection shield
167,793
057-533
UVstar 20i plus but w/o UV protection shield
189,620
057-623
UVstar 30 plus but w/o UV protection shield
207,354
057-633
UVstar 30i plus but w/o UV protection shield
230,545
General laboratory equipment
Hybridization oven - systems
052-000
OV1 Mini hybridization oven (230 V). Including 4 large
256,464
052-100
hybridization bottles (30cm), 5 Nylon meshes, user manual
OV2 Mini hybridization oven (230 V). Including 4 large
271,470
052-200
hybridization bottles (30cm), 5 Nylon meshes, user manual
OV3 Mini shaking oven (230 V). Including 4 large hybridization
342,407
052-300
bottles (30cm), 5 Nylon meshes, user manual
OV5 DUO-therm hybridization oven (230 V). Including 4 large
493,830
hybridization bottles (30cm), 5 Nylon meshes, user manual
Hybridization oven - accessories
052-001
Large hybridization bottle (30 cm, diameter 3,5 cm)
8,594
052-002
Medium hybridization bottle (15 cm, diameter 3,5 cm)
8,594
052-003
Small hybridization bottle (10 cm, diameter 3,5 cm)
8,594
052-011
Cap for hybridization bottle incl. O-ring seal, 1 pcs.each
2,046
052-012
O-ring seal for hybridization bottle, 1 pcs.
052-006
Nylon meshes 23 x 23 cm, 5 pcs.
052-007
Nylon meshes 15 x 10 cm, 5 pcs.
052-008
Rack for 6 hybridization bottles
15,006
052-009
Rotor for OV 1, 2, 3, 5
25,237
052-010
Spring clamps for 50 ml Falcon tubes
1,364
052-016
Spring clamps for 3,5 cm bottles
1,364
409
4,638
4,638
Biolink DNA Crosslinker
054-100
Biolink DNA Crosslinker, 230 V. Nine preset energy exposure
160,972
programs, custom selection of radiation dosis in mJ/cm2
custom selection of radiation time, 5 tubes of 8W (312 nm),
Large LEDisplay, UV blocking window
Accessories
054-101
UV tube 312 nm, 8 Watt
4,638
Rocking platforms
042-400
Standard Rocking Platform WT15, complete with rubber mat
145,966
042-500
and manual, 230 V
Mini Rocking Platform WT16, complete with rubber mat
105,041
042-100
and manual, 230 V
Tumbling Table WT12, complete with rubber mat
212,811
042-600
and manual, 230 V
Mini Tumbling Table WT17, complete with rubber mat
103,677
and manual, 230 V
Thermoblock TB2
051-300
Thermoblock TB2, 230 V; constant temperature incubation
system with positions for two single blocks or one combi block,
without blocks
76,394
Blocks (Note: do not fit into TB1)
051-310
Single block for TB2, 30 x 0.5 ml tubes, conical wells,
15,824
incl. 1 tube cover plate and 1 block lifter
051-311
Single block for TB2, 70 x 0.2 ml tubes, conical wells,
15,824
incl. 1 tube cover plate and 2 block lifters
051-312
Single block for TB2, 24 x 1.5 ml tubes, conical wells,
12,687
incl. 1 tube cover plate and 1 block lifter
051-313
Single block for TB2, 24 x 2.0 ml tubes, conical wells,
12,687
incl. 1 tube cover plate and 1 block lifter
051-315
Single block for TB2, 20 x 1.3 cm deep wells, parallel wells,
12,960
incl. 1 block lifter
051-316
Single block for TB2, 8 x 15 ml vessels (Falcon tubes),
12,278
conical wells, incl. 1 block lifter
051-317
Single block for, 5 x 50 ml vessels (Falcon tubes), conical wells,
12,278
incl. 2 block lifters
051-319
Single block for TB2, flat, without wells,
10,913
incl. 1 block lifter
051-320
Combi block for TB2, 96-well microtiter plates or 96 x 0.2 ml
26,601
tubes, v-form wells, incl. 2 block lifters
051-321
Combi Block for TB2, microtiter plates with flat bottom
18,689
or microscopic slides, without wells, incl. 2 block lifters
Accessories
051-350
External temperature sensor for tubes >0.5 ml
051-331
Tube cover plate for TB2 (1 pcs)
10,913
1,910
051-230
Block Lifter for Thermoblock TB1/TB2 (1 pcs)
1,637
Thermoblock TB1 blocks
051-210
Single block 30 x 0.5 ml tubes conical wells incl. 1 tube cover
17,461
plate and 1 block lifter
051-211
Single block 72 x 0.2 ml tubes conical wells incl. 1 tube cover
13,915
plate and 1 block lifter
051-212
Single block 20 x 1.5 ml tubes conical wells incl. 1 tube cover
11,186
plate and 1 block lifter
051-213
Single block 20 x 2.0 ml tubes cylindrical wells incl. 1 tube
12,278
cover plate and 1 block lifter
051-215
Single block 20 x 1.3 cm deep wells cylindrical wells incl.
11,323
1 block lifter
051-216
Single block 8 x 15 ml vessels conical wells incl. 1 block lifter
11,050
051-217
Single block 5 x 50 ml vessels conical wells incl. 1 block lifter
10,368
051-219
Single block without wells incl. 1 block lifter
051-220
Combi block 96 (full size) 96-well microtiter plate incl. 2 block
9,276
25,374
lifters or 96 x 0.2 ml tubes
051-221
Combi block (full size) microscopic slides or incl. 2 block lifters
18,280
microtiter plates with flat bottom
Accessories
051-230
Block Lifter for Thermoblock TB1/TB2 (1 pcs)
1,637
051-231
Tube cover plate
1,773
Thermoshaker
051-500
TS1 ThermoShaker, 230 V (w/o block)
85,943
Note: interchangeable blocks have to be ordered seperately
Interchangeable blocks
051-510
Interchangeable block for 20 x 1.5 ml tubes
16,779
051-511
Interchangeable block for 20 x 2.0 ml tubes
18,962
051-512
Interchangeable block for 20 x 0.2 ml and 12 x 1.5 ml tubes
18,962
051-513
Interchangeable block for 20 x 0.5 ml and 12 x 1.5 ml tubes
18,962
Gel dryers
041-000
Minidry D61, 18 x 18 cm drying surface, 230 V
87,307
041-100
Mididry D62, 30 x 40 cm drying surface, 230 V
100,949
041-300
Maxidry D64, 40 x 60 cm drying surface, 230 V
143,238
Accessories
041-003
Filter paper, 25 sheets
041-004
Cellophane, 0.3 m x 50 m
15,142
9,276
041-001
Frit for Minidry
4,911
041-101
Frit for Mididry
041-301
Frit for Maxidry (40 x 60 cm)
041-013
Silicone mask for Minidry
2,865
041-103
Silicone mask for Mididry
3,820
041-303
Silicone mask for Maxidry (40 x 60 cm)
9,549
6,548
10,368
Membrane pumps
049-000
Membrane vacuum pump MP86 with adjustable vacuum gauge
42,971
and manometer, end vacuum 100 mbar, max. delivery 6 l/min,
049-100
230 V, 50 Hz
Membrane vacuum pump MP26 with adjustable vacuum gauge
128,232
and manometer, end vacuum 35 mbar, max. delivery 19 l/min,
049-200
230 V, 50 Hz, incl. 1 m vacuum tubing
Membrane pump system I, same as 049-100, but includes
141,874
049-300
separator (Woulff´s bottle), incl. 1 m vacuum tubing
Membrane vacuum pump MP20 with adjustable vacuum gauge
181,435
and manometer, end vacuum 8 mbar, max. delivery 20 l/min,
049-400
230 V, 50 Hz, incl. 1 m vacuum tubing
Membrane pump system II, same as 049-300, incl. separator,
229,181
baseplate and holder for separator, incl. 1 m vacuum tubing
049-401
Baseplate and holder (for separator) for MP20
049-402
Seperator for MP20 and MP40
Membrane vacuum pump MP40 with adjustable vacuum gauge
049-500
24,419
25,783
226,452
and manometer, end vacuum 8 mbar, max. delivery 34 l/min,
049-600
230 V, 50 Hz, incl. 1 m vacuum tubing
Membrane pump system III, same as 049-500, incl. separator,
263,285
baseplate and holder for separator, incl. 1 m vacuum tubing
049-601
Baseplate and holder (for separator) for MP40
24,419
049-402
Seperator for MP20 and MP40
25,783
Refrigerated Circulator
043-400
Refrigerated Circulator KH-5 (Thermostat), 230 V
317,852
Consumables
Disposable electroporation chambers
11601028
Standard Electroporation Chambers (50 pcs./pkg.).
18,143
0.4-cm interelectrode gap (standard electroporation chambers)
for use in electroporating plant or mammalian cells.
11608031
Micro Electroporation Chambers (50 pcs./pkg.).
0.15-cm inter-electrode gap (microelectroporation chambers)
for use in electroporating yeast or bacterial cells.
18,143
Photometer Acessories
Accessories
058-020
Quartz Ultra-micro cuvette, 70 µl
27,147
058-030
Quartz micro cuvette, 500µl
15,006
058-040
Disposable plastic cuvettes, 70 µl, UV transparent (220-900nm),
3,820
100 pcs./pkg.
Blotting Membranes
Nitrocellulose Membranes (unsupported)
Pore size 0.2 µm
10401396
Protran-BA83, 30cm x 3m, 1 roll
40,379
Pore size 0.45 µm
10401196
Protran-BA85, 30cm x 3m, 1 roll
40,379
10401180
Protran-BA85, 30cm x 60cm, 5 sheets/pack
51,566
10402580
Protran-BA85, 33cm x 56cm, 5 sheets/pack
43,244
Nitrocellulose Membranes (reinforced)
Pore size 0.2 µm
10439196
Optitran-BA85, 30cm x 3m, 1 roll
45,563
Whatman CHR paper
3MM Chr (0.34 mm thick)
3030861
200mm x 200mm, 100 sheets/pack
7,094
3030335
315mm x 355mm, 100 sheets/pack
14,869
3030392
350mm x 450mm, 100 sheets/pack
16,234
3030917
460mm x 570mm, 100 sheets/pack
27,693
3030931
580mm x 680mm, 100 sheets/pack
42,289
3030614
20mm x 100m, 1roll
4,229
3030672
100mm x 100m, 1roll
15,415
3030681
150mm x 100m, 1roll
21,008
3030690
190mm x 100m, 1roll
26,328
3030700
230mm x 100m, 1roll
31,240
3030704
270mm x 100m, 1roll
34,377
GB005 (1.2mm thick)
10426981
200mm x 200mm, 25 sheets/pack
9,549
10426994
580mm x 580mm, 25 sheets/pack
19,917
17 Chr (0.92 mm thick)
3017915
460mm x 570mm, 25 sheets/pack
26,874
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement