The SAV Dynamic Interface (SAVDI) is a daemon on *nix systems or service on Windows systems providing a networked interface to SAVI and the virus engine. It thus enables programs written in any language on any system with networking capability to scan files and data for malware.

SAVDI clients can use the ICAP, SSSP or Sophie protocols. The SSSP and Sophie protocols are described in the SAV Interface Sophos Simple Scanning Protocol User Manual. ICAP is defined in

RFC 3507 and the RFC 3507 errata.

Note: Sophie was developed by Vanja Hrustic as a free open source project to provide daemon access to the Sophos virus engine.

1.1.1 Changes since earlier versions

Changes since version 1.0

The open standard protocol, ICAP, has been added with configuration options and structure appropriate for ICAP.

There have been no other changes.

1.2 Features

■

Implemented on Unix/Linux and recent versions of Windows. Windows 9x is not supported.

■ Implements ICAP, SSSP and also provides Sophie functionality for compatibility.

■ Scans can be aborted if the server detects a problem, or if the client breaks the connection.

■

Limits the possibility for Denial of Service (DoS) whether by the use of problem files or by hogs.

■ Updates to virus data can be achieved smoothly.

■

Communication is via configurable TCP ports, Unix domain sockets and Windows named pipes.

See the SSSP and Sophie protocol descriptions for the functionality that they provide.

See the SAVDI ICAP Implementation document for details of ICAP as implemented in SAVDI.

Also see RFC3507 for the definition of ICAP.

SAV Interface Developer Toolkit

1.3 Command Line (*nix)

SAVDI can be run as an ordinary command line process or as a daemon using the -d switch. There is a slight difference in behaviour between the two run modes: if it is running as a daemon SAVDI will under some circumstances respawn itself (see below), but not otherwise.

If SAVDI is run in a non-daemon mode it can be interrupted and stopped with a CTRL-C from the keyboard.

savdid [-d] [-c config] [-l] [-p] [-s]

-d will cause the process to switch to daemon mode.

-c specifies a configuration file other than the default.

-f specifies a pid file.

-l will cause logging to be sent to the console provided -d is not used.

-p will print details of the configuration file format and exit.

-s will suppress the initial version and copyright messages.

By default savdid runs as an attached process and will only switch to daemon mode if -d is specified.

savdid will not respawn itself if it is not running as a daemon.

The default locations for the configuration file are /usr/local/savdi./savdid.conf and

/etc/savdi/savdid.conf in that order of priority.

1.4 Command Line (Windows)

SAVDI can be run as an ordinary command line process or as a Windows service.

If SAVDI is run in command-line mode it can be interrupted and stopped with a CTRL-C from the keyboard.

savdid [-c config] [-l] [-v] [-h]

-c specifies a configuration file other than the default.

-l will cause savdid to send logging to the console if running in command-line mode.

-v will display version and copyright information and then exit.

-h will display usage information and then exit.

By default savdid runs as an attached process and will only run as a service if it has been installed as such.

If the -c command-line argument is omitted, savdid will check the registry for the following string value:

HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\Savdid\ConfigurationPath

SAV Dynamic Interface user manual

If this value is present, it’s value will be interpreted as the path of the configuration file. If the -c command-line argument is omitted and the above registry value is absent, savdid will search its own directory for savdid.conf.

To install savdid as a service, use the following commands:

Command

savdid -install savdid -uninstall savdid -reinstall savdid -start savdid -stop

Description

Installs savdid as a service.

Uninstalls the savdid service.

Equivalent to savdid -uninstall followed by savdid

-install.

Starts the savdid service.

Stops the savdid service.

1.5 Installing SAVDI

A SAVDI installation consists of:

■

The savdid executable.

■

A DLL for Windows Event Log messages, message.dll file.

■

A sample savdid.conf configuration file.

■

A language file, savdidlang_en.txt.

For *nix, savdid may be placed anywhere but the default locations for the savdid.conf and savdidlang_en.txt files are /usr/local/savdi and /etc/savdi. The location for the configuration file may be overridden by a command line option.

For Windows the savdid.conf and savdidlang_en.txt files are placed, and expected to be in the normal installation folder. However the location of the configuration file may be overridden by a command line option.

Create the configuration file either from scratch or by copying and editing the sample configuration.

To verify the configuration file initially run savdid as a command line executable with the log to console switch:

./savdid -l [-c config-file]

Use the -c switch to specify the configuration file if it is not in the standard location.

This makes debugging the configuration file simpler as errors are reported to the console.

Check the operation of savdid by running one or more of the sample applications from another terminal session. Once savdid is running as desired it can be run as a daemon or service.

SAV Interface Developer Toolkit

1.6 Architecture

On Windows savdid runs as a single process either from the command line or as a service.

On *nix it will also run as a single process if run in non-daemon mode. However if run in daemon mode it will run as two processes, a parent and child. The parent spawns the child process, controlling and monitoring it. The parent is the one that will respond to signals, spawning new child processes as requested, and terminating the old ones. Also, if the child process should exit unexpectedly, the parent will start a new one, maintaining the service.

On all platforms, the process providing the scanning service has a main thread with a configurable number of session, or worker, threads.

The main thread fields the initial connections from the clients which are queued to the session threads. An idle session thread will pick up the connection and handle the rest of the communication with the client until disconnection.

Any number of channels may be defined, a channel consisting of: a communications port defining the transport mechanism to be used; the definition of the protocol to be used; the definition of the SAVI object to be used. Each channel can support any number of clients, if permitted by the transport mechanism.

To minimise a session’s startup time SAVI objects are pre-allocated and initialised.

SAVDI provides for multiple:

■

Protocols (ICAP, SSSP and Sophie have been implemented).

■

Transport mechanisms (TCP/IP, unix domain sockets and Windows named pipes have been implemented).

■

Logging mechanisms (to the console, to a daily log file to syslog on *nix systems).

■

Languages.

1.7 Denial of Service Protection

There is no protection against the daemon being flooded with scan requests denying service to legitimate clients however, there are some measures that can be taken to limit the effect of accidental and malicious DoS attacks.

Timers can be used to limit the effect of careless usage:

■

There is a configurable time limit imposed on a scan.

■

There is a configurable time limit imposed on a request.

■

There are timeouts on sending and receiving data from the client.

■

An idle timer closes the connection if the client is silent for too long.

Unidentified protocol requests will cause the connection to be closed.

SAV Dynamic Interface user manual

Remote connections can be restricted to a subnet.

If a client disconnects during a scan, the scan will be aborted.

Administrators can create channels with different ownership and protections, and with different properties such as timeouts, allowing for different classes of client. Multiple versions of the daemon, with different configuration files, can be run further enhancing the separation of clients.

Memory faults and similar exceptions are caught and will cause savdid, if it is running in daemon mode, to spawn a new version of itself to handle new connections, while the old daemon completes its current work as possible before it exits.

savdid has an internal pending connection queue. Once the queue is full any further connections will be rejected. This means the maximum number of connections to savdid is the no of threads

+ the maximum length of the queue.

When scanning directories there is no protection built in from a link which loops back in the directory tree. However on *nix systems soft links are ignored and provided hard links are only permitted to files and not directories this possibility is precluded.

1.8 Internationalisation

Log messages, including SAVI result codes, are available for translation, or amendment. The language as defined by the locale is used by default if it is available. If it is not available, or if a translation of a message is not available the English version will be used instead.

Note: Presently only the English version of the text is available.

1.9 Logging

savdid has a single logger for all log messages. The log is sent to any one of a set of configurable destinations, the console, a file, or on *nix systems, the syslog. A log entry consists of a message, represented by a number and a list of parameters. The message number is converted to a text string before the message is output

On *nix systems the parent process, in daemon mode, will always log significant events to the syslog.

Savdid logs the following events, in order of priority:

1. Errors and Detected threats.

2. Startup and shutdown of savdid.

3. Start and end of connections and sessions.

Savdid can be configured to limit the events it logs according to the above priority. Level 0 events, which are always logged, are the errors and threats. The default level is level 2 and includes savdid startup and shutdown events.

In addition, individual channels can be requested to log requests from clients. This is independent of the selected logging level.

SAV Interface Developer Toolkit

All log entries include a timestamp and events relating to client communications also include a unique serial number which identifies the session and request. This serial number is the same number specified in the SSSP ACC message.

If the log entry is recording a threat the threat name will be enclosed in single quotes and the location of the threat will be enclosed in double quotes. Should the location of the threat include a double quote, the double quote will be preceded by a double quote.

When logging to a serial file the log files are named with the date and a new one is started at midnight.

For more information, see

Log

(page 16).

The message number in a log message is translated before output. The translations are contained in a configurable directory, which can contain more than one translation file. The file to be used for translation is also configurable. If a message number cannot be translated the translation file

‘en’ (English) is used, and if that also fails, the number itself is output.

1.10 Scanning permissions

The following only applies to the SSSP and Sophie protocols as they allow scanning of files and whole trees on the server system.

SSSP and Sophie allow scanning by sending either the name of a file, or by sending the contents to be scanned. SSSP has different requests, SCANFILE and SCANDATA. Sophie limits scanning by file and scanning by data according to the transport mechanism. With Sophie scanning by data is required for IP connections and scanning by filename is required for Unix domain sockets and

Windows named pipes. SSSP allows both on any transport mechanism. However, the configuration for SSSP includes options to disallow scanning by file and scanning by data by channel (allowscanfile and allowscandata).

SSSP and Sophie also permit the scanning of directories if allowed. Sophie will accept a directory specification instead of a file specification and scan the directory and sub-directories. SSSP has specific requests for scanning a directory and for scanning sub-directories, SCANDIR and

SCANDIRR. For both protocols the ability to scan directories and to scan sub-directories are separately controlled by configuration options, allowscanfile for SSSP and allowscandir for Sophie.

Note that the SSSP scan directory requests permit the use of a file name instead of a directory name, whereas a scan file request does not permit the use of a directory name.

For more information, see

Scanprotocol

(page 20).

Irrespective of the protocol, only files and directories will be scanned, other types of file system object, for example symbolic links will be ignored or rejected.

For the SSSP SCANFILE, SCANDIR, SCANDIRR, and Sophie scan file by file name requests it is possible to limit the areas that may be scanned. The configuration options ‘deny’ and ‘allow’ permit the administrator to prevent scanning of directories (/dev on *nix systems may be denied, for example), or to limit clients to an allowed area. The logic is:

1. If the requested path is denied, deny the request.

SAV Dynamic Interface user manual

2. If the requested path is allowed, allow the request.

3. If there are any allowed paths, deny the request.

4. Allow the request.

While the first and second tests are obvious, the third one means that an allow option will limit all requests to that sub-tree, allowing the administrator to set up a special scanning directory, say.

This is intended to provide for either a restrictive system where only specific areas are allowed, or a permissive system where specific areas are denied, so that in general only either the allow, or the deny options would be used. Mixing allow and deny options is not recommended.

For more information, see

Scanner

(page 23).

1.11 Security

At the process level:

■ savdid will accept only a configurable number of concurrent sessions.

At the channel level:

■

TCP/IP sockets can be limited to a specific sub-set of IP addresses from which connections will be accepted.

■ To allow or deny the ability to scan by filename or scan by data if SSSP is used. The ability to scan directories and to recurse into sub-directories is also configurable and for all application protocols.

■

Timeouts in seconds can be set for:

■

Idle time between client requests.

■

Wait time for a receive to complete.

■

Maximum time allowed for a file scan to complete.

■

Maximum time allowed for a request to complete.

■

The maximum amount of data that may be sent for scanning.

Note: There is no encryption so network socket users have no protection from network sniffers.

1.11.1 Security (*nix)

At the process level:

■ savdid, if run from a super-user account, can switch to running as a configurable user.

■ savdid will refuse to scan a file for which the user of a unix domain socket client, does not have read permissions where possible.

SAV Interface Developer Toolkit

At the channel level:

■

Unix domain sockets can be created with configurable ownership and permissions.

1.11.2 Security (Windows)

At the process level:

■ savdid impersonates the client of a named pipe connection and attempts all file accesses from within that security context.

1.12 Exit modes

savdid has three ways of exiting:

■

Ungracefully - The process exits immediately.

■

Request gracefully - It will complete all current requests before disconnecting from the client and exiting when all have finished. New connections are rejected.

■

Session gracefully - It completes all current sessions and exits when all have completed. New connections are rejected.

The choice between these three modes of exiting is configurable using the onrequest daemon option.

1.13 Signals (*nix)

The daemon will trap and respond to the following signals:

Signal

SIGINT

SIGTERM

Action

To exit immediately and without waiting for any completions, i.e.

the daemon will exit ungracefully.

To finish gracefully, waiting for current requests or sessions to complete according to the onrequest configuration option.

SAV Dynamic Interface user manual

Signal

SIGHUP

Action

■

To spawn a new daemon which will handle new connections while the old one finishes the current requests or sessions, depending on the onrequest configuration option, before exiting. The new process will reload the configuration file and virus data.

■

If savdid is not running in daemon mode it will not spawn a new process but will exit according to the value of the onrequest configuration option.

In addition the daemon traps exceptions and signals originating in the virus engine and will treat it as if a SIGHUP signal had been received, except that the exit mode will depend on the onexception configuration option. The onexception option is similar to the onrequest option.

This table summarises these actions:

Signal

INT

TERM

HUP

Non-recoverable error

Respawn?

Yes (if in daemon mode)

Exit mode

Immediate onrequest option onrequest option onexception option

To enable the correct savdid process to be signalled, savdid writes its process ID, pid, to a file from which it can be read and used for signalling. The pid file may be specified on the command line or in the configuration file. If it is not specified at all, the default is /var/run/savdid.pid. This shell command line will correctly signal the daemon, if using the default pid file:

$ kill -HUP `cat /var/run/savdid.pid`

Note: The quotes used with pid file are back quotes, not single quotes.

1.13.1 Moribund processes (*nix)

On occasion savdid daemon will either exit or restart itself as a result of a request or an exception.

When restarting, the new savdid will take on new connections, while the old one completes its current work. So before it fully exits, the old savdid will enter a moribund state while it waits for current work to complete. Depending on circumstances, it is possible for there to be more than one moribund process though such circumstances should be very rare.

SAV Interface Developer Toolkit

The parent process monitors the number of child processes and will forcibly terminate the older processes when the number of child processes exceeds five, i.e. one active and four moribund.

See the onexception and onrequest configuration options.

1.14 Virus and Engine Updates

On Windows, provided the host system has the Sophos automatic updates included, the savdi service will automatically be updated with the latest virus data and version of the virus engine. If there is no automatic updating then the service must be stopped and re-started to load the latest version of the virus data and engine.

On *nix systems, the daemon can be signalled with a HUP signal to cause it to reload the virus data and the SAVI library: libsavi, which includes the engine. For more information about this signal, see

Signals (*nix)

(page 10). Note that although the child process will use the new SAVI library, the parent process will continue to use the original one.

SAV Dynamic Interface user manual

2 Configuration Options

The configuration file syntax is essentially a list of name/value pairs which are grouped into named sub-configurations that define the configuration of well-defined elements of the daemon.

Sub-configurations can in turn contain sub-configurations. Syntax is:

<statement list> := <statement> {<statement list>}

<value list> := [|<value><value list>]

<option sep> := “:”

<eol> represents the end of the line.

<spaces> represents one or more space characters.

Comments start with a “#” and end at the end of line and are ignored.

As an example, this is a fragment from a savdid configuration file: user: savdid group: savdid threadcount: 3 onrequest: REQUEST onexception: DONTWAIT log {

type: FILE

logdir: /var/log/savdid/log

loglevel: 0

} channel {

commprotocol {

type: IP

address: 172.18.33.14

port: 4010

subnet: 172.18.33.0/24

# etc

}

scanprotocol {

type: SSSP

allowscandata: YES

SAV Interface Developer Toolkit

allowscanfile: NO

# etc

}

scanner {

type: SAVI

savigrp: GrpInternet 1

deny: /dev

# etc

}

} channel {

# etc

}

2.1 Configuration file errors

When savdid starts it will do some checks on the configuration and may display one or more errors. The errors have the following format:

The <option name> will include the sub-configurations, if any, where the option is located. So for example "channel[3]-scanner[1]-deny" specifies the deny option in the first scanner sub-configuration of the third channel.

2.2 Options Summary

In the following tables, the columns are:

Option - the option name and the format of the option.

N - the cardinality of the option, ie how many there can or should be. A single number (usually

'1') indicates that there must be that number of options present. A range, 0..1 for example, indicates the minimum and maximum number of occurrences. The example, 0..1 is for something that can occur at most once. 1..N means that it must occur at least once but there is otherwise no limit.

Default - the default value if there is one. '-' indicates that there is no default.

Comment - self-explanatory.

SAV Dynamic Interface user manual

2.3 Daemon

Option

pidfile: <filename> user: <user name> group: <group name> threadcount: N maxqueuedsessions virusdatadir: <dir name> virusdataname <name>

0..1

idedir: <dir name> 0..1

onexception: "DONTWAIT"|

"REQUEST"|SESSION"

0..1

onrequest: "DONTWAIT"|

"REQUEST"|SESSION" log

0..1

Default Comment

/var/run/savdid.pid

For *nix systems, Where savdid will store the process ID of the controlling process. If a pidfile is specified on the command line, the command line will take precedence.

For Unix systems. The user to switch to on start up. See note 1.

Defaults to SAVI default

"REQUEST"

For Unix systems. The group to switch to on start up. See note 1.

The number of threads to use and hence the maximum number of concurrent scans.

The maximum number of connections/sessions to queue to be queued internally. 0 means there will be no queueing.

Where to find the virus data. See note 2.

The name of the main virus data file, without its extension. See note 2.

Where to find the IDE files. See note 3.

"SESSION"

What to do when exiting as a result of an exception. See note

What to do when exiting as a result of a request to exit. See note 3.

The sub-configuration for logging.. See note 4.

SAV Interface Developer Toolkit

Option

channel

1..N

Default Comment

The sub-configuration for the communication channels.

Note:

1. To change user or group, the daemon must have suitable privileges, and possibly running as super-user.

2. The virusdatadir, virusdataname and idedir options can also be set using the savistr options in the channel scanner configuration. However since the virus data is common to all this is not advised. In such a situation the set of virus data that will be used is undefined.

3. When exiting the daemon can exit immediately without waiting, or it can wait for the current requests to complete, or it can wait for the current sessions to complete. The choice depends on the circumstances (exception or request) and in particular whether sessions are long running or not.

4. If a log configuration is not specified the logging is to either the console of system/event log depending on whether the daemon is running interactively or not.

2.4 Log

Option

type: "FILE"|"CONSOLE"

|"SYSLOG" logdir: <directory name>

0..1

Default

See note 1.

Comment

loglevel: <level>

0..1

Where to write the log files if

FILE is specified. See note 2.

The level of event logging required. Level 0 is the minimum and includes errors and threats.

Level 2 includes everything.

Note:

1. The log type defaults depending on whether or not logdir is defined: if it is defined FILE is assumed, if not CONSOLE is assumed.

2. Log files are named yymmdd.log and a new file is started with the first log message after midnight.

SAV Dynamic Interface user manual

2.5 Channel

Configuration options per channel for SSSP and SOPHIE:

Option

commprotocol scanprotocol

1 -

Default

scanner 1 -

Comment

The sub-configuration defining the transport protocol to be used.

The sub-configuration defining the application protocol to be used.

The sub-configuration defining the scanner.

Or, if using ICAP:

Option

logrequests: YES|NO commprotocol service

0..1

1..N

Default

Comment

If YES causes all requests from the client to be logged.

The sub-configuration defining the transport protocol to be used.

The sub-configuration defining the service.

2.6 Service

Option

name: <service name> type: <service type>

1 -

Default Comment

The name of the service.

The type of the service. For now it can only be “avscan”.

SAV Interface Developer Toolkit

Option

scanprotocol scanner

1 -

Default Comment

The sub-configuration defining the application protocol to be used. See the ICAP scanprotocol variant below.

The sub-configuration defining the scanner.

2.7 Commprotocol

The options for the commprotocol configuration depend on the choice of transport: IP, Unix or

Pipe.

Option

type: "IP" address: <ip address> port: N

0..1

1 subnet: <ip address>/<subnet> 0..1

requesttimeout: N sendtimeout: N recvtimeout: N

0..1

Default

0.0.0.0

-1

Comment

Specifies TCP/IP as the transport layer.

Specifies the IP address for the socket to bind to.

Specifies the port no. to use for an IP channel (1 to 65535).

The client IP addresses from which the daemon will accept connections. <subnet> is the number of significant bits in the address and so is in the 0 to 32.

The timeout when waiting for a new request in seconds. -1 means wait forever.

The timeout for sending in seconds.

The timeout for receiving in seconds.

SAV Dynamic Interface user manual

UNIX

Option

type: "UNIX" socket: <filename> user: <user name> group: <group name> mode: <mode> requesttimeout: N sendtimeout: N recvtimeout: N

0..1

Default

Daemon user

Daemon group user

-1

Comment

Specifies a Unix domain socket as the transport layer.

The file name for the socket for a UNIX channel. Not used otherwise.

The user name for ownership of the socket.

The group name for ownership of the socket.

One of user, group, all specifying who may use the socket.

The timeout when waiting for a new request in seconds. -1 means wait forever.

The timeout for sending in seconds.

The timeout for receiving in seconds.

Note: To set user, group and protections on a socket, the daemon must have suitable privileges, and possibly running as super-user

Pipe

Option

type: "Pipe" name: <name> requesttimeout: N

0..1

-1

Default Comment

Specifies a Windows named pipe as the transport layer.

The name for the named pipe.

The timeout when waiting for a new request in seconds. -1 means wait forever.

SAV Interface Developer Toolkit

Option

sendtimeout: N recvtimeout: N

0..1

Default

Comment

The timeout for sending in seconds.

The timeout for receiving in seconds.

2.8 Scanprotocol

SSSP and Sophie

Option

type: "SSSP"|"SOPHIE"

1 tmpfilestub: <partial file name> 0..1

maxscandata: N maxmemorysize: N allowscanfile:

"NO"|"FILE"|"DIR"|"SUBDIR" allowscandir:

"NO"|"DIR"|"SUBDIR"

0..1

Default Comment

-/tmp/savdid_tmp Specifies the directory and file name stub to be used for temporary files used when scanning data sent to the server

- see maxmemoryscansize below.

0 (unlimited)

Specifies the scan protocol to be used.

In bytes the maximum amount of data a client can send for scanning.

250000

The maximum size of data from the client before using a temporary file instead. See tmpfilestub above.

For SSSP only. Specifies the level of scanning a client is permitted.

NO means none at all, FILE means only explicit files may be scanned, DIR means a directory or file may be scanned, SUBDIR means that sub-directories will also be scanned. See notes (1) and (2).

For SOPHIE only. Specifies the level of scanning a client is

SAV Dynamic Interface user manual

Option

allowscandata: "YES"|"NO"

0..1

Default

Comment

permitted. NO means that directories cannot be scanned,

DIR means a directory or file may be scanned, SUBDIR means that sub-directories will also be scanned. See note (1).

For SSSP only. Allow the client to send data for scanning. See notes (1) and (2).

Log all client requests.

logrequests: "YES"|"NO" 0..1

Note:

1. The allowscanfile and allowscandata options do not apply for Sophie as the protocol will only allow scanning by filename on Unix domain sockets and scanning by data on TCP/IP sockets.

2. SSSP will enable the requests SCANDATA, SCANFILE, SCANDIR and SCANDIRR according to the settings of these options.

ICAP

Option

type: ICAP version: <version> retain: NONE|MALWARE|

PROBLEM|ALL dontsend: <extension list>

0..1

Default

XXX

NONE

“”

Comment

Specifies ICAP as the protocol.

The version of this configuration.

Change it whenever a change is made that may alter the results sent to the client.

Optionally retain files containing malware or which have caused the engine a problem for diagnosis. The files are named and placed according to the tmpfilestub below.

A string containing a list of file extensions that will be sent as entered to a client in the

OPTIONS response.

SAV Interface Developer Toolkit

Option

allow204: YES|NO keepalive: YES|NO maxbodysize: N maxmemorysize: N maxchunksize: N tmpfilestub: <file stub> block-bombs: YES|NO

0..1

block-encrypted: YES|NO block-corrupt: YES|NO block-timeouts: YES|NO

0..1

block-errors: YES|NO 0..1

0..1

Default

1000000

See note 1 below

YES

Comment

An ICAP option used to tell the client that the server may return a 204 response.

Tells the server to keep a connection open when it completes a transaction.

The maximum size in bytes of the body of a request that the server will accept. Zero indicates that any size is acceptable.

The maximum amount of memory in bytes that will be used to store the body of a request before the server uses a temporary file instead.

The maximum size of the chunks that the server will return to the client. Zero indicates that the chunks may be any size.

The directory path and file name stub for temporary files.

If a zip-bomb is detected it will not be returned to the client if

YES

If an encrypted file is detected it will not be returned to the client.

If a corrupt file is detected it will not be returned to the client.

If it takes too long to scan a file and the scan is aborted the file will not be returned to the client.

If there is an error while scanning the file, the file is not returned to the client.

SAV Dynamic Interface user manual

Option

block-exceptions: YES|NO forceemptybody: YES|NO

0..1

Default

YES

Comment

If the file causes an exception, the file is not returned to the client.

At least one ICAP client expects an empty body even when unnecessary.

Note:

1. On Windows the temporary directory is <standard temp directory>\SAVDI_ while on *nix systems it is /var/tmp/SAVDI_. Note that this is also used for the retain option.

2.9 Scanner

Specifies the scanner and its configuration options.

Option

type: "SAVI" inprocess: "YES"|"NO"

0..1

maxscantime: N maxrequesttime: N deny: <directory name> allow: <directory name>

0..1

0..N

Default

"SAVI"

"YES"

-1 (unlimited)

Comment

Specifies the type of scanner. For now only SAVI is accepted.

Specifies whether the scanner is in process or not, the alternative is out of process. For now only

"YES" is accepted.

Maximum time, in seconds, to allow a scan to complete.

Maximum time in seconds to allow servicing a request. This should be greater than or equal to maxscantime.

Specifies a directory which is not allowed to be scanned. All files and sub-directories will be barred.

Specifies a directory which is allowed to be scanned. By implication all other directories are denied unless explicitly allowed.

SAV Interface Developer Toolkit

Option

saviint: <name> <value> savigrp: <name> <value> savistr: <name> <value> savists: <name> <value>

0..N

Default Comment

Specifies a SAVI/Engine integer

(U16) option. See Note 1.

Specifies a SAVI/Engine group configuration option. See Note

Specifies a SAVI Engine string option. See Notes 1 and 2.

Specifies a SAVI/Engine status

(U32) option. See Note 1.

Note:

1. savdid does not validate or verify the SAVI options; they are passed through to the SAVI objects as given.

2. It is inadvisable to use these options to set the virus data directory and associated options.

These options should be set at the daemon level.

SAV Dynamic Interface user manual

3 Appendix: Return Codes

In addition to the SAVI return codes documented in savi_sen.pdf as part of the SAVI Developer

Toolkit, the following return codes can also be returned by the SAV Dynamic Interface in response to a scan request:

Return Code

060D

060E

060F

Description

Engine exception. Please report the file to Sophos Technical Support.

Request terminated due to timeout. See the maxrequesttime configuration option.

Scan terminated due to timeout. See the maxscantime configuration option.

SAV Interface Developer Toolkit

4 Appendix: REJect Codes

If SSSP rejects a request, the REJ message is accompanied by a numeric code indicating the cause:

Code

Cause

The request was not recognised. After sending this the server will disconnect.

The SSSP version number was incorrect.

There was an error in the OPTIONS list.

SCANDATA was trying to send too much data.

The request is not permitted.

SAV Dynamic Interface user manual

5 Appendix: SAV Dynamic Interface Performance

The method used by the client to interact with the SAV Dynamic Interface will be constrained by circumstances. Nonetheless the following are offered as guidelines in selecting the best method:

■

Connect and stay connected. There is a considerable overhead to establishing the connection, and breaking it.

■

Use a Unix domain socket, or windows named pipe rather than TCP/IP. There is an extra overhead using TCP/IP.

■

Avoid using a one-off script, i.e. executing a script for each scan. Not only is there the overhead of making a new connection but also the overhead of starting the interpreter, script compilation, and so on.

■

Use the SSSP OPTIONS request only if necessary, it is cheaper to have the options set in the configuration file. If a client has different needs to other clients, create another channel tailored for that client.

■

If possible scan a whole directory rather than making requests to scan each file.

To illustrate the differences in performance, the following table, ordered with the fastest first, shows throughput of files being scanned relative to the fastest method (indexed at 100):

1. A C program which connects, scans a file 100 times, and disconnects is run once.

Option

Unix domain socket

TCP/IP (localhost:4010)

Value

100

2. A Perl script which connects, scans a file 100 times, and disconnects is run once.

Option

Unix domain socket

TCP/IP (localhost:4010)

Value

3. A Perl script which connects, scans a file, and disconnects 100 times is run once.

Option

Unix domain socket

TCP/IP (localhost:4010)

Value

SAV Interface Developer Toolkit

4. A C program which connects, scans a file, and disconnects is run 100 times.

Option

Unix domain socket

TCP/IP (localhost:4010)

Value

5. A Perl script which connects, scans a file, and disconnects is run 100 times.

Option

Unix domain socket

TCP/IP (localhost:4010)

Value

SAV Dynamic Interface user manual

**6 Appendix: rc file for *nix**

This is a basic rc file for a Redhat distribution as an illustration of an rc file and how to control savdid.

#!/bin/bash

# description: Sophos SAV Dynamic Interface

# processname: savdid

SAVDID=/usr/local/savdi/savdid

PIDFILE=/var/run/savdid.pid

# source function library

. /etc/rc.d/init.d/functions

RETVAL=0 prog="savdid" case "$1" in

start)

echo -n $"Starting $prog: "

# Start savdid in daemon mode, no banner, and specifying

# the pidfile

$SAVDID -d -s -f $PIDFILE

RETVAL=$?

# Sleep a moment to let savdid get things worked out

sleep 1

# The presence of the pidfile indicates that it is still running

[ -f $PIDFILE ] && RETVAL=0

if [ $RETVAL -eq 0 ]; then

echo_success

touch /var/lock/subsys/savdid

else

echo_failure

echo

;;

stop)

echo -n $"Shutting down $prog: "

# Tell savdid to stop dead

[ -f $PIDFILE ] && kill -INT `cat $PIDFILE`

while [ -f $PIDFILE ]; do sleep 1; done

echo_success

SAV Interface Developer Toolkit

rm -f /var/lock/subsys/savdid

echo

RETVAL=0

;;

restart)

echo -n $"Shutting down $prog: "

# Tell savdid to exit gracefully

[ -f $PIDFILE ] && kill -TERM `cat $PIDFILE`

while [ -f $PIDFILE ]; do sleep 1; done

echo_success

echo

$0 start

RETVAL=$?

;;

reload)

echo -n $"Reloading $prog"

if [ ! -f $PIDFILE ]; then

echo " $prog is not running"

RETVAL=1

else

kill -HUP `cat $PIDFILE`

RETVAL=0

echo

;;

condrestart)

if [ -f /var/lock/subsys/savdid ]; then

$0 stop

$0 start

RETVAL=$?

;;

status)

status savdid

RETVAL=$?

;;

echo $"Usage: $0

{start|stop|restart|reload|condrestart|status}"

exit 1 esac exit $RETVAL

SAV Dynamic Interface user manual

7 Legal notices

2012 Sophos Limited. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.

Sophos, Sophos Anti-Virus and SafeGuard are registered trademarks of Sophos Limited, Sophos

Group and Utimaco Safeware AG, as applicable. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.

Salut! Sunt un chatbot AI special antrenat pentru a te ajuta cu Sophos SAV Dynamic Interface Security Software User Manual. Am analizat cu atenție documentul și te pot ajuta să găsești informațiile exacte de care ai nevoie sau să explic conținutul în termeni clari și simpli. Indiferent dacă ești în căutarea unui ghidaj privind anumite funcții, pași de depanare sau utilizare generală, nu ezita să pui întrebări. Cu cât oferi mai multe detalii despre preocupările sau nevoile tale, cu atât mai precis și eficient te pot ajuta!

Asistentul scrie

Asistentul nu mai este la tastatură. Te rugăm să încerci din nou mai târziu.

Cuprins

Se pare că ai ajuns la un document care este scris în mai multe limbi, inclusiv una care nu este limba ta nativă. Poți folosi linkurile următoare pentru a ascunde temporar paginile fără limba pe care o preferi.