POP manual
TWEAKERS'
oMIOp+"
Bluetooth mini Speaker
FE CE RoHS
Thank you for purchasing ‘ TWEAKERS™ POP ‘ bluetooth™ speaker ,
its compact design will bring you ultra-portability and amazingly to
deliver powerful bass w/ impressive sound , Enjoy the world of power,
rhythm and harmony with it ! Also this user manual will assist you to
operate POP speaker in a quicker and proper way, kindly read it
through before use .
Overview
Tweakers POP speaker employs with Bluetooth technology to
connect Bluetooth devices , such as mobile phones, Music players ,
notebooks & PCs etc. , and w/ which to enable you to —
- Wirelessly listen music w/ ultra bass and clear sound.
- handle Phone calls secured and safely on driving
Power / Power on / off switch
Charging indicator
User Interface
—— Z— SI
TWEAKERS"
Volume down Volume up charging port Rope hole
Blue tooth search light | MIC
Answer ( Call handling )
Line in
Technical Spec
Product Model
Tweakers POP
Bluetooth Specification
Version 3.0 Class II
Frequency Bandwidth
2.4GHz-2.4835GHz, ISM Band
Play time
3 hours
Speaker output
2W
Supported Bluetooth profile
A2DP, HFP
Battery Capacity
500mAh
Operating Temperature
-20-50°C
Storage Temperature
-40~70°C
Weight
0.16KG
Size / Dimension
62*54MM ( 62*77MM - Pop up)
Safety Certification
CE. FCC
Charging / Pairing / Connectin
Please follow three steps before using POP speaker
~ Charge POP speaker
a. Plug one end of the USB cord to a 5V USB power adapter or
computer/notebook device and the other end to POP speaker
b. While charging, LED is lighted red; when turned blue, the speaker
is fully charged.
Note :
- When the LED flashes with beep, it indicates the battery level is low,
please charge it.
- Charging in a —20 to +50°C
- Charging time: around 3.5hours.
~ Turn POP speaker on / off
A slide switch is used to power on / off POP speaker .
~ Pair / connect POP speaker to Bluetooth device
a. Power on POP speaker , POP would automatically reconnect to
last ' paired ' Bluetooth device
b. 1sttime to use POP OR the last paired Bluetooth device is not
existed OR not within effective range ( 10 meter )
- Enable bluetooth function on your phone or the other device
- Search for new Bluetooth device until "TWEAKERS POP ' appears
in the ' searched Bluetooth device list ' on your phone / device .
- Select TWEAKERS POP".
- Enter passcode 0000 to pair ( if required ) and connect POP to your
device .
Note : POP's Bluetooth LED is offif no Bluetooth device to connect
after 5 minutes.
Call handling
~ When you receive a call, you hear a ringing tone through the speaker.
~ To answer the call, press the answer key lightly.
~ To reject an incoming call, press and hold the answer key for 2 to 3
seconds until you hear a beep and let go.
~ To end a call, press the answer key lightly, or wait for the other party to
hang up.
Volume Control
+ sound volume up
- sound volume down
Wire POP speaker to Phone / Music player
If there's no Bluetooth function on your phone or music player devices ,
you can wire POP speaker ( Line input ) to them w/ the attached Audio
cable .
Package Content
Please ensure the following items are included in the package before
your purchase:
- Tweakers POP speaker
- Product User Guide
- USB Cable
- Audio ( Line In ) cable
Care and maintenance
POP speaker is a product of superior design and craftsmanship, should
be treated with care , below recommendations will help you protect your
warranty coverage.
@ Keep all accessories out of the reach of children.
@ Keep the device dry. liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet, allow it to dry
completely.
@ Do not use or store the device in dusty, dirty areas. Its moving parts
and electronic components can be damaged.
@ Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
@ Do not store the device in cold areas. When returns to normal
temperature, moisture can damage electronic circuit boards.
@ Do not attempt to open the device.
6 Do not drop, knock, or shake the device. Rough handling may break
circuit boards and the mechanism .
@ Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the device.
@ Do not paint the device. Paint can clog the moving parts and may
cause function ineffective .
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement