Manual - Test Equipment Depot

Manual - Test Equipment Depot
Flo-Dynamics® TS410™
Table of Contents
TABLE OF CONTENTS
INTRODUCTION to the TS410 .................................................... 2
I.
SAFETY INFORMATION ....................................................... 3
- Section 1.01: Important Safety Notice....................................... 3
- Section 1.02: Important Safety Instructions............................... 5
II. SYSTEM FEATURES & SPECIFICATIONS .......................... 9
- Section 2.01: Features............................................................... 9
- Section 2.02: Dimensions & Technical Specifications............... 10
- Section 2.03: Machine Overview............................................... 11
III. OPERATING PROCEDURES ...............................................12
- Section 3.01: Suggested Additional Tools................................. 12
- Section 3.02: Transmission Fluid Exchange.............................. 14
- Section 3.03: Additional Instructions.......................................... 15
IV. HOSES & ADAPTERS ......................................................... 16
- Section 4.01: Adapter Hoses..................................................... 16
- Section 4.02: Adapters............................................................... 19
V. TROUBLESHOOTING & MAINTENANCE .......................... 20
- Section 5.01: Troubleshooting................................................... 20
- Section 5.02: Maintenance Procedures..................................... 20
VI. REPLACEMENT PARTS ..................................................... 21
- Section 6.01: Replacement Part List........................................ 21
- Section 6.02: Replacement Part Illustrations............................. 22
- Section 6.03: Ordering Information............................................ 23
LIMITED WARRANTY ............................................................... 24
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
1
Flo-Dynamics® TS410™
Introduction
INTRODUCTION
to the TS410
Congratulations on the purchase of your Flo-Dynamics TS410 automatic transmission fluid
exchanging machine!
Simply put, this machine is the cleanest, safest, easiest, fastest, most thorough, and most costefficient method of fluid exchange ever devised. Suddenly, regular automatic transmission
maintenance becomes a more realistic proposition.Transmission fluid exchanging is cleaner and
easier than ever!
Transmission Fluid Exchange:
To attain the highest level of protection for internal transmission components and increase the
transmission’s life span to the maximum, it is recommended that the transmission’s lubrication
system is serviced every 15,000 miles (or according to the vehicle owner’s manual). The FloDynamics TS410 exchanges virtually all of the used transmission fluid to new, without even
requiring the transmission pan to be dropped. There is no spillage, and no mess.
• The TS410 can be used practically anywhere – and with almost any vehicle.
• It is compact, mobile, and self-contained.
• It operates off the 12-volt battery of the vehicle being serviced.
• It does not require a pit, lift, or ramp.
• The TS410 hooks up directly to one of the vehicle’s transmission cooler lines.
• The ATF fluid exchange, from setup to finish, typically takes 15 minutes or less.
No wonder an ATF exchange is the most requested method of preventative automatic
transmission maintenance today.
Please take time to read through this manual to familiarize yourself with the TS410 before
performing your first ATF exchange.
2
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
I. Safety Information
I. SAFETY INFORMATION
1.01 IMPORTANT SAFETY NOTICE
For your safety, read this manual thoroughly before operating your TS410 unit.
Your TS410 unit is intended for use by properly trained, skilled professional automotive
technicians. The safety messages presented below and throughout this user’s manual are
reminders to the operator to exercise care when using this unit. Before using your TS410,
always refer to and follow the safety messages and applicable service procedures
provided by the manufacturer of the vehicle being serviced.
• Read All Safety Instructions
Read, understand and follow all safety messages and instructions in this manual. Safety
messages in this section of the manual contain a signal word with a three-part message
and, in some instances, an icon.
• Signal Words
The signal word indicates the level of the hazard in a situation:
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided,
may result in moderate or minor injury to the operator or to bystanders.
Indicates a situation which, if not avoided, may result in damage
to the TS410 or the vehicle being serviced.
• Safety Messages
Safety messages in this section contain three different type styles:
• Normal type states the hazard.
• Bold type states how to avoid the hazard.
• Italic type states the possible consequences of not avoiding the hazard.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
3
I. Safety Information
Flo-Dynamics® TS410™
• Safety Symbols
A safety symbol, when present, gives a graphical description of the potential hazard, and
how to avoid the hazard:
Risk of Fire
Read Instructions Before Use
Risk of Explosion
Mandatory Eye Protection
Risk of Entanglement
Mandatory Protective Gloves
Dangerous Fumes
Mandatory Protective Clothing
Do Not Pull or Move
4
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
I. Safety Information
1.02 IMPORTANT SAFETY INSTRUCTIONS
Engine exhaust contains toxic gases.
• Vent vehicle’s exhaust away from work area.
• Do not breathe exhaust.
Exhaust gases will cause injury or death.
Improper use and operation.
• Read, understand and follow all safety messages and operational procedures in this
manual before operating the Flo-Dynamics TS410.
• This equipment should be operated only by qualified personnel.
• Use this equipment only as described in this manual.
Improper use and operation of this product can result in injury.
Engine systems can malfunction expelling fuel, oil vapors, hot steam, hot toxic exhaust gases and
other debris.
• Wear safety goggles and protective clothing, user and bystander.
Engine systems that fail can cause serious injury.
Risk of expelling pressurized fluids.
• Wear safety goggles and protective clothing, user and bystander.
• Verify that engine and machine are off before connecting or disconnecting cooler lines
and adapter hoses.
• Always unplug the machine from its power source when not in use.
• Keep the service hoses away from hot or moving engine parts. Hoses can split or burst
causing fluid to be expelled.
• Tighten all connections properly. Insufficient or excessive torque can result in fluid
leakage.
• Avoid contact with automatic transmission or power steering fluid.
• Treatment methods are as follows:
Eyes: Flush eyes with plenty of water.
Skin: Wash with soap and water.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
5
I. Safety Information
Flo-Dynamics® TS410™
Inhalation: Move to uncontaminated area.
Ingestion: If large amount, get medical attention.
If any irritation persists, get medical attention.
• Dispose of used fluid according to environmental laws and regulations.
Although automatic transmission and power steering fluid pose no significant health hazards,
some individuals may experience adverse reactions upon contact. Pressurized fluid can cause
serious injury.
Risk of unexpected vehicle movement.
• Block drive wheels before starting vehicle’s engine to begin an exchange.
• Unless instructed otherwise, set parking brake and put gear selector in park.
• Do not leave a running vehicle unattended.
A moving vehicle can cause injury.
Engine has moving parts. Risk of entanglement.
• Do not place tools on fenders or other places in engine compartment.
• Keep yourself, clothing, battery cables and service hoses clear of moving parts such as
fan blades, belts and pulleys.
Contact with moving parts can cause injury.
Risk of fire or explosion.
• Do not operate the TS410 in the vicinity of open containers of flammable liquids such as
gasoline.
• Keep hoses and jumper cables away from heat sources and sharp edges.
• Do not operate equipment with damaged cords or hoses until they have been examined
by a qualified serviceman.
Fire or explosion can cause injury.
Risk of fire or explosion. Gases produced by a battery are highly explosive.
• Wear safety goggles and protective clothing, user and bystander.
• This machine is equipped to operate on 12-volt DC power only. A power source greater
than this can result in serious injury to the user as well as damage to the machine.
• Do not smoke, place metal tools on battery or allow a spark or flame in vicinity of battery.
• Clean battery terminals before hooking the machine’s battery clips to them. During
cleaning, keep airborne corrosion from eyes, nose and mouth.
6
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
I. Safety Information
• Be sure both battery cables are tightly connected to the battery terminals as instructed
before proceeding with a fluid exchange.
• Never remove battery cables from the battery terminals while the machine is operating.
Only use the “EMERGENCY STOP” button located on the control panel to stop an
exchange.
Battery explosion can cause injury.
Battery acid is a highly corrosive sulfuric acid.
• Wear safety goggles and protective gloves, user and bystander.
• Have plenty of fresh water and soap nearby. If battery acid contacts skin, clothing, or
eyes, flush exposed area with soap and water for 10 minutes.
• While cleaning battery’s terminals, keep airborne corrosion from eyes, nose and mouth.
• Do not touch eyes while working near battery.
Battery acid can burn eyes and skin.
Risk of burns.
• Wear gloves when working near hot engine components.
• Do not touch hot exhaust systems, manifolds, engines, radiators, etc.
• The automatic transmission fluid coming from the vehicle along with some of the
machine’s components that the fluid comes into direct contact with (i.e. external: hoses
and quick-disconnect fittings; internal: hoses and all fittings) may reach temperatures
uncomfortable to the touch. Exercise caution in avoiding contact with these items.
Hot components can cause injury or discomfort.
Ratchet mechanisms and tools may slip or break if dirty. Mismatched or partially worn parts can
cause ratchet or any tool to slip or break.
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
• Do not replace worn parts individually. If adapter hose fittings become worn, see
“Appendix C – Replacement Parts” to order new hoses.
• The use of any other accessories not specified in this manual may create a hazard.
Tools that slip or break can cause injury.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
7
Flo-Dynamics® TS410™
I. Safety Information
Risk of injury.
• This equipment should be operated by qualified personnel only.
• Use this equipment only as described in this manual.
• Always unplug the machine from its power source when not in use.
• Loop the power cord loosely in its proper location when machine is not in use.
• Do not operate equipment with a damaged battery cables or hoses, or if the equipment
has been dropped or damaged, until it has been examined by a qualified service
representative.
• Care should be taken to arrange the battery cables and service hoses so that they will
not be tripped over or pulled.
• Never pull on the power cables or service hoses to transport the TS410. Damage may
occur to these components, or machine may tip over.
• Keep area of operation clear of unnecessary tools and equipment. Utilize recessed tool
storage areas on the top of the machine.
• Never leave the machine running unattended.
• The TS410 is not designed for any other purpose than the exchanging of automatic
transmission and power steering fluid.
Operation of your TS410 unit by anyone other than qualified personnel may result in injury.
Risk of equipment damage.
• Flushing high mileage cars that have not been previously serviced can cause operating
problems in the transmission.
• Connect battery cables to a 12-volt power source only (i.e. vehicle’s battery).
• Servicing, transporting, or storing this machine in an attitude other than the normal
operating position can result in fluid spillage and/or component damage.
• Use only the manufacturer’s recommended attachments.
• The Flo-Dynamics TS410 is fully automatic. Refer to your control panel at all times.
• Never pull on the power cables or service hoses to transport the TS410. Damage may
occur to these components, or machine may tip over.
• Periodically clean the machine by wiping down with a clean, soft, dry cloth.
Improper operation of equipment may result in damage to machine or components.
SAVE AND FOLLOW THESE INSTRUCTIONS!
8
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
II. System Features & Specifications
II. SYSTEM FEATURES & SPECIFICATIONS
2.01 FEATURES
Mechanical Features
• Accurate sensor technology allows optimum fluid level to be maintained in
vehicle’s transmission.
• Two in-line 22-micron absolute fluid filters capture microscopic particles and
contaminants.
• Numbered quick-disconnect hoses with adapters save time in identifying the proper
hoses for the application
• Easy to use adapters allow quick hookup to virtually any automobile make and model,
saving time and money.
• Clear service hoses give visual confirmation of new and used fluid movements.
• Ergonomically correct working height means greater productivity, less stress and strain.
• Durable roto-cast polyethylene body and tanks prevent vehicle damage. The unit is also
lightweight and durable, for easier handling and longer life.
• Large 5-inch locking caster wheels make machine easy to maneuver.
• Easy-access service panel provides hassle-free operations for greater efficiency.
Electronic Features
• Self-contained battery cables hook up to the vehicle’s 12-volt battery
• Automatic monitoring of fluid in new and used fluid tanks assures safe operation
• Accurate sensor technology
• LCD counter display with cumulative ATF options
• Ability to exchange anywhere from 1 to 20 quarts in 1 quart intervals
• Fluid measurements can be changed from quarts to liters
• Drain used fluid tank (no need to tip machine upside-down)
• Drain new fluid tank
• Ability to pause machine during exchange to change transmission filter
• Battery backup allows machine to resume where it left off should it lose power
• Add new fluid to transmission in 2/10 quart increments (approx. 1/8” on the dipstick)
• Remove fluid from transmission in 2/10 quart increments (approx. 1/8” on the dipstick)
• Cycle valves feature allows you to electronically clean out valves
• Totalizer check (indicates lifetime use)
• Interactive menu:
- “Auto Prime” feature automatically primes the system
- Indicate new fluid volume
- Indicate used fluid capacity
- Read battery voltage
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
9
Flo-Dynamics® TS410™
II. System Features & Specifications
2.02 DIMENSIONS & TECHNICAL SPECIFICATIONS
DIMENSIONS:
39" Tall
24 3/4" Wide
25" Deep
Service Hoses:
10’ outside of machine
Wheels:
5” locking casters (front)
5” casters (back)
Weight:
95 lbs
TECHNICAL SPECIFICATIONS:
Power:
12-Volt DC from vehicle battery
Fluid Sensors:
Accurate sensor technology
Filters:
22-micron absolute fluid filters
Operating Temperature:
60º to 150ºF (15º to 65ºC)
10
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
II. System Features & Specifications
2.03 MACHINE OVERVIEW
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
11
Flo-Dynamics® TS410™
III. Operating Procedures
III. OPERATING PROCEDURES
3.01 SUGGESTED ADDITIONAL TOOLS
CAUTION
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
• The use of any other accessories not specified in this manual may create a hazard.
• Read, understand and follow Safety Instructions in the front pages of this manual and on
product safety labels.
12
Line Wrenches
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4"
End Wrenches
3/8”
7/16”
1/2"
9/16”
5/8”
11/16”
3/4”
Hex Wrenches
1/8”
11/16”
Nut Drivers
(American)
3/16”
1/4”
5/16”
3/8”
7/16”
Nut Drivers
(Metric)
6 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
Filter Band Clamp
For replacing canister filters
Metric End or
Line Wrenches
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
Screwdrivers
Phillips
Standard
1 long
1 long
1 short
1 short
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
III. Operating Procedures
DANGER
• Vent vehicle’s exhaust away from work area.
• Do not breathe exhaust.
• Read, understand and follow Safety Instructions in the front pages of this manual and on
product safety labels.
WARNING
• Wear safety goggles and protective clothing, user and bystander.
• Do not operate the TS410 in the vicinity of open containers of flammable liquids such as
gasoline.
• This machine is equipped to operate on 12-volt DC power only.
• Do not smoke, place metal tools on battery or allow a spark or flame in vicinity of battery.
• Clean battery terminals before hooking the machine’s battery clips to them. During
cleaning, keep airborne corrosion from eyes, nose and mouth.
• Keep yourself, clothing, battery cables and service hoses clear of moving parts such as
fan blades, belts and pulleys.
• Unless instructed otherwise, set parking brake and put gear selector in park.
• Do not leave a running vehicle unattended.
• Keep the service hoses away from hot or moving engine parts. Hoses can split or burst
causing fluid to be expelled.
• Tighten all connections properly. Insufficient or excessive torque can result in fluid
leakage.
CAUTION
• Use this equipment only as described in this manual. Use only the manufacturer’s
recommended attachments.
• Care should be taken to arrange the battery cables and service hoses so that they will
not be tripped over or pulled.
• The TS410 is fully automatic. Refer to your control panel at all times.
CAUTION
•Flushing high mileage cars that have not been previously serviced can cause operating
problems in the transmission.
• Never pull on the power cables or service hoses to transport the TS410. Damage may
occur to these components, or machine may tip over.
• Servicing, transporting, or storing this machine in an attitude other than the normal
operating position can result in fluid spillage and/or component damage.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
13
Flo-Dynamics® TS410™
III. Operating Procedures
3.02 BASIC OPERATING INSTRUCTIONS
IMPORTANT
Turn vehicle’s A/C system OFF before starting an exchange.
New transmission fluid MUST be 60°F or above for optimal performance.
FIRST TIME OPERATION (Priming the System)
(Only necessary when machine is received, before first operation.)
System must be primed before first use.
1. Connect machine to battery
2. Make sure fluid is in new fluid tank
3. Connect the red and black service hoses together using the adapters
4. Press 0
5. Press 5
6. Press START
TRANSMISSION FLUID EXCHANGE
1. Connect battery leads.
2. Locate and disconnect the most easily accessible hose or fitting at the radiator end of the
transmission cooler system.
3. Refer to Section 4.01- Adapter Hoses to identify the specific adapter hoses required for the
vehicle, and attach adapter hoses to vehicle.
4. Connect red & black service hoses to quick-disconnect adapters on ends of adapter hoses.
5. Press 1 to select “Inline Exchange”.
6. Select quantity using the ▲ and ▼ buttons, and press START.
7. Press "1" for No Cleaning, "2" for 5 Minute Cleaning, or "3" for 10 Minute Cleaning.
When adding chemicals, add directly to the vehicle for best results.
8. Start vehicle’s engine, and press START to confirm choices. Exchange will begin. Once the
exchange has begun, press the STOP button once to pause the machine. Press START to
resume from pause. Press STOP a second time to cancel the exchange.
9. When exchange is finished, the unit will beep and display “Complete”.
10. You may top off or remove fluid by using the “ADD FLUID” or “REMOVE FLUID” buttons.
11. Press 0 to return to the main menu.
14
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
III. Operating Procedures
3.03 ADDITIONAL INSTRUCTIONS
Add 1 Quart
1. Press 0
2. Press 3
Remove 1 Quart
1. Press 0
2. Press 4
Drain Waste Fluid Tank
1.
2.
3.
4.
5.
6.
Connect to battery
Connect open end adapter to red hose. Make sure all other hoses are disconnected
Press 0
Press ▼
Press 7
Unit will shut off when complete
Drain New Fluid Tank
1.
2.
3.
4.
5.
6.
Connect to battery
Connect open end adapter to red hose. Make sure all other hoses are disconnected
Press 0
Press ▼
Press 6
Unit will shut off when complete
Prime the Machine
1.
2.
3.
4.
5.
6.
Connect to battery
Make sure fluid is in new fluid tank
Connect the red and black service hoses together using the adapters
Press 0
Press 5
Press START
Switch Hoses
1.
2.
3.
4.
5.
Turn vehicle off
Switch hoses
Restart vehicle
Press START
Press 3
Shift to Neutral
1. Shift vehicle to neutral
2. Press START
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
15
Flo-Dynamics® TS410™
III. Operating Procedures
CUSTOMER SERVICE CONTACT INFORMATION
If you experience any problems or have any questions, call technical support at:
1-800-303-5874
16
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
IV. Hoses & Adapters
IV. HOSES & ADAPTERS
CAUTION
• Do not replace worn parts individually. If adapter hose fittings become worn, see
“Appendix C – Replacement Parts” to order new hoses.
• The use of any other accessories not specified in this manual may create a hazard.
• Read, understand and follow Safety Instructions in the front pages of this manual and on
product safety labels.
4.01 ADAPTER HOSES
STANDARD HOSES
941801- Hose #51
(Mates with #52)
941802- Hose #52
(Mates with #51)
-Green- 5/8”-18 [F]
SAE 45 Flare - Swivel
(Chrysler - 1993 and Newer)
-Green- 5/8”-18 [M]
SAE 45Flare
(Chrysler)
-Blue-
941803- Hose #53
(Mates with #57)
-Black941805- Hose #55
(Mates with Step Fitting)
-Blue941807- Hose #57
(Mates with #53)
-Black941809- Hose #59
(Mates with Step Fitting)
-Black941813- Hose #63
(Mates with Step Fitting)
941815- Hose #65
(Mates with #75)
5/8”-18 [M]
SAE 45 Flare - Swivel
(General Motors with 3/8" Tube Diameter Lines - All Years)
3/8” Diameter Hose [F]
Open End Hose w/Clamp
(Import - 1987 and Newer)
5/8”-18 [F]
SAE 45 Inverted
(General Motors with 3/8” Tube Diameter Lines - 1997 and
Newer)
1/2” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
5/16” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
-Green- 1/4”-18 [M]
NPTF
(Jeep Cherokee- 1980-1986)
(Continued on next page)
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
17
Flo-Dynamics® TS410™
IV. Hoses & Adapters
-Red-
1/2”-20 [F]
SAE 45 Inverted
(Chrysler, Ford Aerostar, Jaguar, Mercedes,& Cadillac-1985 and
Newer) * Needs Ford Slide Tool 940140 for Aerostar / Windstar
-Red-
1/2”-20 [M]
SAE 45
(Chrysler and Ford)
-Red-
5/8”-18 [M]
SAE Inverted - Swivel
(Ford With Large Nut Adapter - 1980 and Newer)
941816- Hose #66
(Mates with #67)
941817- Hose #67
(Mates with #66)
941818- Hose #68
(Mates with #69)
-Red-
5/8”-18 [F]
SAE Inverted
(Ford)
-Blue-
1/2”-20 [M]
SAE 90 Inverted - Swivel
(General Motors with 5/16" Tube Diameter Lines - All Years)
-Blue-
1/2”-20 [F]
SAE Inverted
(General Motors & Ford Expedition)
-Red-
1/2”-20 [F]
SAE Inverted
(Ford)
-Red-
1/2”-20 [M]
SAE 90 Inverted - Swivel
(Ford 5/16" Small / Long Nut Adapter - 1980 and Newer)
941819- Hose #69
(Mates with #68)
941820- Hose #70
(Mates with #71)
941821- Hose #71
(Mates with #70)
941822- Hose #72
(Mates with #73)
941823- Hose #73
(Mates with #72)
941825- Hose #75
(Mates with #65)
-Green- M14 x 1.5 [F]
Swivel O-ring
(Jeep Cherokee, Ford Escort - 1980-1986)
-Red-
M14 [F]
Banjo Fitting
(Ford Escort – 1994 and Newer)
-Red-
M14 x 1.5 [M]
Bolt w/ 2 Washers
(Ford Escort - 1994 and Newer)
940874- Hose #78
(Mates with #79)
940875- Hose #79
(Mates with #78)
941828- Hose #80
(Mates with #81)
18
-Black- 1/4” [M]
Universal Bump Fitting
(Import)
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
941829- Hose #81
(Mates with #80)
941830- Hose #82
(Mates with #63)
941831- Hose #83
(Mates with #55)
941832- Hose #84
(Mates with #59)
941835- Hose #87
(Mates with #88)
941836- Hose #88
(Mates with #87)
941841- Hose #89
(Mates with #90)
941842- Hose #90
(Mates with #89)
IV. Hoses & Adapters
-Black- 1/4” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
-Black- 5/16” [M]
Universal Bump Fitting
(Infiniti, Lexus, and BMW - 1980 and Newer)
-Black- 3/8” [M]
Universal Bump Fitting
(Toyota, Nissan, Honda, Ford and Chrysler - 1975 and Newer)
-Black- 1/2” [M]
Universal Bump Fitting
(Toyota, Nissan and Honda - 1980 and Newer)
-Green- 9/16”-18 [M]
JIC 37° Flare - Inverted
(Dodge Durango/Dakota - All Years)
-Green- 9/16”-18 [F]
JIC 37° Flare - Swivel
(Dodge Durango/Dakota - All Years)
-Black- 3/4”-16 [M]
SAE O-Ring
(Chevy DuraMax w/Allison Transmission – 2001 & Newer)
-Black- 3/4”-16 [F]
SAE O-Ring Adapter
(Chevy DuraMax w/Allison Transmission – 2001 & Newer)
-Red-
5/8-18 [M]
(Ford Focus / Mercury Mystique)
-Red-
5/8-18 [F]
(Ford Focus / Mercury Mystique)
941080- Hose #93
(Mates with #94)
941081- Hose #94
(Mates with #93)
940388- Hose #124
(Mates with #142)
940389- Hose #142
(Mates with #124)
-Yellow- 3/4”-18 [M]
90° Inverted SAE 45° - Swivel
(Ford Torqshift / 250SD / 550SD / Econoline / Excursion)
-Yellow- 3/4”-18 [F]
Inverted SAE 45° Rigid - Straight
(Ford Torqshift / 250SD / 550SD / Econoline / Excursion)
-Yellow-
941900- Hose #149
(Mates with 5/8” Adapter)
Operations Manual
5/8” Diameter Hose [F]
Open End Hose w/Clamp
(Chevy DuraMax w/Allison Transmission - 2003 & Newer)
Printed in the U.S.A. for Flo-Dynamics ®
19
Flo-Dynamics® TS410™
IV. Hoses & Adapters
4.02 ADAPTERS
The following adapters allow quick and easy hookup to virtually any vehicle make and model.
940328
1/2” Adapter
942163S
GM Adapter
940329
3/8” Adapter
941910
3/8” Ford Adapter
942162
Quick Disconnect Tool
940334
5/16” Adapter
941899
5/8” Duramax Adapter
940831
Master Hose Connector
942169
5/8” Medium GM Adapter
941966
Slider Pin Adapter (Optional)
20
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
VI. Replacement Parts
V. TROUBLESHOOTING & MAINTENANCE
5.01 COMMON PROBLEMS / SOLUTIONS
Problem: “Power Failure” screen displays
Solution 1: Check battery connection. Make sure there are no loose connections, and the
machine’s battery clips are not reversed. Remove all corrosion from the battery
terminals. Make sure vehicle’s A/C system is turned off.
Solution 2: The vehicle’s battery is not putting out enough voltage to run the machine.
Connect the machine to a better 12V power source.
Stand-alone shelf batteries will not work.
5.02 MAINTENANCE PROCEDURES
• Replace Canister Filters (Part#: 940796A) when machine prompts you to do so:
Use a standard filter band clamp tool to unscrew old filters, and replace them with new filters.
Make sure new filters are on tight.
• Clean Waste Fluid Screen (Located in bottom of recessed hose tray area)
This helps eliminate surface tension caused by debris and contamination from the air.
Using a sharp pick, remove screen. Clean using degreaser and brush, and blow out with air
compressor.
• Periodically Wipe Down Exterior using a soft, damp cloth.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
21
Flo-Dynamics® TS410™
V. Troubleshooting & Maintenance
VI. REPLACEMENT PARTS
6.01 REPLACEMENT PART LIST
Part #
Description
941779W
941210W
Control Panel w/ Elec. Board & Label
Battery Cable Assembly
941617W
940474
941225
941226
Motor Control Box
Sensor Rod
5/8" Fluid Tube
Fluid Tube Elbow Fitting
940468
940843
940839
940840
940841
940842
R940775
H940772
941220
Manifold / Pump Assembly
Pressure Switch (Factory preset to 6 psi)
3/2 Solenoid Valve [Short] (S2)
3/2 Solenoid Valve [Tall] (S1)
Coil with Spade Connector [Short] (S2)
Coil with Spade Connector [Tall] (S1)
Hose Kit
Hose Tray
Hose Rack
940831
940785
940786
Master Hose Connector
Service Hose (Black)
Service Hose (Red)
R940750
941205
R940752
942113
941202
941203
941705W
Chassis
Console
Top Sink
Tank Cap
Tank Red New
Tank Red Used
Service Panel w/ Label
R942118
R942137
Locking Caster Wheel
Caster Wheel
940796A
R942150
Canister Filter
Used Fluid Screen (1 1/4" Diameter)
941778
941777
941776
941921
22
Operations Manual
Quick Start Instructions
Quick Start Instructions: Additional Functions
Universal Hose Chart
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
VI. Replacement Parts
6.02 REPLACEMENT PART ILLUSTRATIONS
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
23
Flo-Dynamics® TS410™
Warranty
24
Printed in the U.S.A. for Flo-Dynamics ®
Operations Manual
Flo-Dynamics® TS410™
VI. Replacement Parts
LIMITED ONE (1) YEAR WARRANTY
Flo-Dynamics TS410
Flo-Dynamics warrants only to the original Purchaser that under normal use, care and service,
the Equipment (except as otherwise provided herein) shall be free from defects in material and
workmanship for one year from the date of original invoice. External hoses, remote control
modules, adapters and all other attachments, supplies and consumables (except as otherwise
provided herein) are warranted for 90 calendar days from the date of original invoice. Filter
elements are not warranted. Printed circuit boards purchased from, but not installed by Seller are
not warranted.
SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE
REPAIR OR, AT SELLER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH
TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE
NECESSARY, IN SELLER’S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD
OPERATING CONDITION. NO OTHER WARRANTIES EXPRESS OR IMPLIED OR
STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND
ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
This warranty does not cover (and separate charges for parts, labor and related expenses shall
apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment
caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration,
modification or adjustment of the Equipment by anyone other than Seller’s authorized
representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or
handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental
conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or
other air contaminants, radio frequency interference, electric power failure, power line voltages
beyond those specified for the equipment, unusual physical, electrical or electromagnetic stress,
and/or any other condition outside of Seller’s environmental specifications; (G) use of the
Equipment in combination or connection with other equipment, attachments, supplies or
consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable
federal, state or local regulation.
Repairs or replacements qualifying under this Warranty will be performed on regular business
days during Seller’s normal working hours within a reasonable time following Purchaser’s
request. All requests for Warranty service must be made during the stated Warranty period.
This warranty is non-transferable.
Operations Manual
Printed in the U.S.A. for Flo-Dynamics ®
25
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement