Simplicity 1022ER, 9.5 Gross TP 22" Single Stage Remote Chute Snowthrower Manual

Parts Manual
Mfg. No: 1697144-01
1022ER, 9.5 Gross TP 22" Single Stage
Remote Chute Snowthrower
Copyright © Briggs & Stratton. All Rights reserved
12-Dec-2022
Table Of Contents
Model Components
Page
Auger Drive Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auger Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chute Rotation Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Decals Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handles & Controls Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel & Body Covering Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
3
4
6
8
10
12
14
16
18
20
n
o
12-Dec-2022
Auger Drive Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
4
Mfg. No: 1697144-01
n
o
12-Dec-2022
Auger Drive Group
REF NO
PART NO
QTY
DESCRIPTION
290
360
0100
709868
709927
709870
1
1
1
80
90
100
0300
------------709876
1
1
1
1
150
300
330
750
0350
--------720016
----709872
1
1
1
1
1
160
310
320
340
350
600
0370
------------------------709874
1
1
1
1
1
1
1
BELT, Drive
PLATE, Tension
KIT, AUGER CABLE
-(Incl. Ref. Nos. 80, 90, 100)
SPRING, Cable
SLEEVE, Rubber
CABLE, Auger
KIT, ENGINE PULLEY
-(Incl. Ref. Nos. 150, 300, 330, 750)
WASHER, M10, Split Lock
PULLEY, Driver
SCREW, 3/8-24 x 1, Hex Head
WASHER, 10x28x3, Flat
KIT, IDLER PULLEY, TENSION PLATE
-(Incl. Ref. Nos. 160, 310, 320, 340, 350, 600)
NUT, M8, Lock
Spacer, 8.5 ID, 18 OD, 6 Thick, Shoulder
BOLT, M8x40, Carriage
SPACER, Idler Pulley
PULLEY, 8 ID, 53 OD, 22 Wide, Idler
WASHER, 10x20x1.8, Flat
KIT, HARDWARE, IDLER BRACKET
-(Incl. Ref. Nos. 370, 390, 400, 420, 810)
SPRING, Tension
WASHER, 6 X 18 X 1.5, Flat
SPACER, Idler Arm
WASHER, 8x22x2, Flat
* NUT, M6, Flange Head, Lock
KIT, AUGER PULLEY
-(Incl. Ref. Nos. 410, 770, 780, 790, 800)
PULLEY, Driven
CLAW, Coupling
WASHER, 10x25x2, Flat
WASHER, M10, Split Lock
NUT, Lock, M10
KIT, CABLE BASE, AUGER DRIVE
-(Incl. Ref. Nos. 260, 450, 460, 470, 480, 490, 740)
WASHER, M6, Split Lock, MC
BRACKET, Cable Guide
PULLEY, Cable
SCREW, M6 X 12, Hex Head Shoulder
SCREW, M6 1.0X12MM, Hex Head, CZ
WASHER, 6x12x.7, Flat
NUT, M6, Flange Head
370
390
400
420
810
0410
F
t
o
N
709869
----------------709875
1
1
1
1
1
1
410
770
780
790
800
0450
--------------------709871
1
1
1
1
1
1
260
450
460
470
480
490
740
----------------7091835
---------
2
1
1
1
2
2
1
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
5
u
d
i
t
c
n
o
12-Dec-2022
Auger Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
6
Mfg. No: 1697144-01
n
o
12-Dec-2022
Auger Group
REF NO
PART NO
QTY
DESCRIPTION
0620
709882
1
200
260
430
440
620
660
670
760
0640
--------7091835
--------------------770004
1
6
6
6
1
1
1
1
1
380
630
640
650
0660
1752935
5025299X5
--------709878
4
4
1
1
1
260
430
440
660
670
960
0670
----7091835
----------------709877
3
3
3
1
1
1
1
----709881
2
1
680
700
710
720
0710
--------1739727
7091246
1687804
1
1
2
12
1
710
720
1390
1739727
7091246
709879
2
12
1
380
630
640
650
710
720
1752935
5025299X5
--------1739727
7091246
4
4
1
1
2
12
KIT, AUGER BEARING, RIGHT
-(Incl. Ref. Nos. 200, 260, 430, 440, 620, 660, 670, 760)
BOLT, M6x16, Hex Head
WASHER, M6, Split Lock, MC
SCREW, M6 1.0X12MM, Hex Head, CZ
WASHER, 6x12x.7, Flat
CAP, Bearing
RETAINER, Bearing
BEARING
WASHER, 6x23x3, Flat
KIT-SCRAPER BAR
-(Incl. Ref. Nos. 380, 630, 640, 650)
NUT, 1/4-20, Nylon Hex, CZ
SCREW, 1/4-20 x 5/8, Allen Head
BAR, Scraper, Robolon
SUPPORT, Scraper Blade
KIT, AUGER BEARING, LEFT
-(Incl. Ref. Nos. 260, 430, 440, 660, 670, 960)
WASHER, M6, Split Lock, MC
SCREW, M6 1.0X12MM, Hex Head, CZ
WASHER, 6x12x.7, Flat
RETAINER, Bearing
BEARING
WASHER, Flat, 18x24x2
KIT, AUGER BEARING
-(Incl. Ref. No. 670)
BEARING
KIT-AUGER ASSEMBLY
-(Incl. Ref. Nos. 680, 700, 710, 720)
SHAFT, Auger Assembly
PLATE, Center
FLIGHT, Auger
SCREW, 1/4-20 x 3/4" Pan Head Self-Tap (Torx) BZ
KIT, AUGER FLIGHT
-(Incl. Ref. Nos. 710, 720)
FLIGHT, Auger
SCREW, 1/4-20 x 3/4" Pan Head Self-Tap (Torx) BZ
KIT, AUGER FLIGHT & SCRAPER BAR
-(Incl. Ref. Nos. 380, 630, 640, 650, 710, 720)
NUT, 1/4-20, Nylon Hex, CZ
SCREW, 1/4-20 x 5/8, Allen Head
BAR, Scraper, Robolon
SUPPORT, Scraper Blade
FLIGHT, Auger
SCREW, 1/4-20 x 3/4" Pan Head Self-Tap (Torx) BZ
670
0680
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
7
u
d
i
t
c
n
o
12-Dec-2022
Chute Rotation Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
8
Mfg. No: 1697144-01
n
o
12-Dec-2022
Chute Rotation Group
REF NO
PART NO
QTY
DESCRIPTION
0201
770635
1
860-201
860-202
0213
--------707502
1
2
1
860-211
860-212
860-213
860-214
0560
----------------709922
2
1
1
1
1
560
870
880
0580
0820
0860
--------703054
1740650MA
709756
770633
1
3
3
4
1
1
860-203
860-204
860-205
860-206
860-207
860-208
860-209
860-210
860-211
860-212
860-213
860-214
860-215
860-216
860-217
860-218
860-219
860-220
0870
------------------------------------------------------------------------772082
2
1
1
1
1
2
1
1
2
1
1
1
1
1
2
1
1
1
1
----703054
706516
770634
1
1
2
1
UNIVERSAL JOINT
-(Incl. Ref. Nos. 860-201 & 860-202)
JOINT, Universal
PIN, 4 X 20, Spring
KIT, Chute Knob
-(Incl. Ref. Nos. 860-211, 860-212, 860-213 & 860-214)
WASHER, 10x20x1, Flat
RING, External Retaining, 10
KNOB, Chute Rotator
KNOB, Cover
KIT, CHUTE GEAR
-(Incl. Ref. Nos. 560, 870 & 880)
GEAR, 65T, 8P, Driven, SS Chute Rotation
RETAINER, Chute
SCREW, 1/4-20X0.625
TIE, Cable, 7.4", Orange
CHUTE ASSEMBLY, Quick
REMOTE CHUTE ASSEMBLY, Handle
-(Incl. Ref. Nos. 0860-203 Thru 0860-220)
SCREW, 4.8x45, Phillips Head Self Tapping
COVER, Top
ASSEMBLY, Rotater Bracket
NUT, M8, Lock
WASHER, FLAT, 8X16X1.2
RING, SJ Mounting Plate, Plastic
COVER, Bottom
LEVER, Rotator
WASHER, 10x20x1, Flat
RING, External Retaining, 10
KNOB, Chute Rotator
KNOB, Cover
SLEEVE, Limit
PIN, 2.5X16, Cotter
WASHER, 10X25X2, Flat
SPRING
WASHER, Rubber, XX
BUSHING, Remote
KIT, Chute Retainer
-(Incl. Ref. Nos. 870 & 880)
RETAINER, Chute
SCREW, 1/4-20X0.625
SCREW, Hi-Low, 1/4-15 x 1
REMOTE CHUTE ASSEMBLY, Plate
870
880
0900
0920
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
9
u
d
i
t
c
n
o
12-Dec-2022
Decals Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
10
Mfg. No: 1697144-01
n
o
12-Dec-2022
Decals Group
REF NO
PART NO
QTY
DESCRIPTION
6010
6030
6050
6070
6080
1737865YP
1739966YP
1739970YP
1739977YP
1750734YP
1
1
1
1
1
6090
1750736YP
1
6130
6140
1757674YP
772081
1
1
DECAL, Danger Chute Warning, FR/ENG
DECAL, Chute, FR-EN
DECAL, 1-2-3 Start, FR-EN
DECAL, Bail Engagement
DECAL, 4, START, FR-EN
-(Electric Start)
DECAL, 5, START, FR-EN
-(Electric Start)
DECAL, Simplicity
DECAL, Model, 1022ER
-(Electric Start) (Remote Chute)
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
11
u
d
i
t
c
n
o
12-Dec-2022
Engine Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
12
Mfg. No: 1697144-01
n
o
12-Dec-2022
Engine Group
REF NO
PART NO
QTY
0005
13A135-0002-F1 1
0005-10
591702
1
1000
709863
1
0010
0020
0030
0040
1010
----1754873YP
--------709864
2
1
1
1
1
0050
703066
2
DESCRIPTION
ENGINE, Briggs & Stratton, 9.5 GTP, Snow Series
-(Engine Model: 13A135-0002-F1) (Refer to Note: *)
**MOTOR, Starter
-(Refer to Note: **)
KIT, STARTER HOUSING
-(Incl. Ref. Nos. 0010 through 0040) (For electric start only.)
NUT, M6, Lock
HOUSING, Starter, 110V
SCREW, M6x40, Hex Flange Head
WASHER, 6x12x.7, Flat
KIT, HARDWARE, STARTER
-(Incl. Ref. No. 0050) (For electric start only.)
SCREW, 8-16 x 2, Pan Head Phillips, Plast.
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note** See your local Briggs & Stratton distributor for parts and service.
Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service.
Copyright © Briggs & Stratton. All Rights reserved
13
12-Dec-2022
Frame Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
14
Mfg. No: 1697144-01
n
o
12-Dec-2022
Frame Group
REF NO
PART NO
QTY
DESCRIPTION
150
180
520
0510
----75246GS
----709866
4
4
1
1
500
510
530
0540
1752876YP
----703116
84004738
3
1
3
1
540
550
0640
----7091081SM
770004
1
5
1
380
630
640
650
1752935YP
5025299X5YP
----1752660AYP
4
4
1
1
WASHER, M10, Split Lock
TAPTITE
HOUSING, Auger
KIT, DRIVE HOUSING
-(Incl. Ref. Nos. 500, 510, 530
CAPSCREW, Hex Head, 5/16-24 x 5/8
HOUSING, Drive
LCKWSHR
KIT, CHIMNEY
-(Incl. Ref. Nos. 540, 550)
CHIMNEY
HWST, 1/4-15X3/4 BZ
KIT-SCRAPER BAR
-(Incl. Ref. Nos. 380, 630, 640, 650)
NUT, 1/4-20, Nylon Hex, CZ
SCREW, 1/4-20 X 5/8
BAR, Scraper, Robolon
SUPPORT, Scraper Blade
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
15
u
d
i
t
c
n
o
12-Dec-2022
Handles & Controls Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
16
Mfg. No: 1697144-01
n
o
12-Dec-2022
Handles & Controls Group
REF NO
PART NO
QTY
DESCRIPTION
0010
709860
1
10
20
30
40
50
60
70
440
0040
----84002745
----------------709858
----709859
1
1
1
2
2
2
1
1
2
40
50
60
0110
------------709862
2
2
2
1
110
120
130
140
0120
----703988
--------709861
1
4
4
4
1
KIT, UPPER HANDLE
-(Incl. Ref. Nos. 10, 20, 30, 40, 50, 60, 70, 440)
HANDLEBAR, Upper SS
GUIDE, ROPE
NUT, M6, Lock
KNOB, Wing, M8
WASHER, M8, Curved
BOLT, M8x40, Carriage, Curved Head
BAIL, Engine Stop
WASHER, 6x12x.7, Flat
KIT, UPPER HANDLE HARDWARE
-(Incl. Ref. Nos. 40, 50, 60)
KNOB, Wing, M8
WASHER, M8, Curved
BOLT, M8x40, Carriage, Curved Head
KIT, LOWER HANDLE
-(Incl. Ref. Nos. 110, 120, 130, 140)
HANDLE, Lower
CAPSCREW M8-1.25X16
WASHER, Lock, M8
WASHER, Flat, 8 X 16 X 1.2
KIT, LOWER HANDLE HARDWARE
-(Incl. Ref. Nos. 120, 130, 140)
CAPSCREW M8-1.25X16
WASHER, Lock, M8
WASHER, Flat, 8 X 16 X 1.2
120
130
140
F
t
o
N
703988
---------
4
4
4
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
17
u
d
i
t
c
n
o
12-Dec-2022
Wheel & Body Covering Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
18
Mfg. No: 1697144-01
n
o
12-Dec-2022
Wheel & Body Covering Group
REF NO
PART NO
QTY
DESCRIPTION
0190
709883
1
190
0220
----709885
2
1
190
200
210
220
390
0225
--------------------770059
1
1
1
1
1
1
190
200
210
225
390
0240
--------------------709890
1
1
1
1
1
1
30
240
250
270
390
550
950
0280
--------------------7091081SM
----709895
1
1
2
2
1
2
1
1
------------709887
7
1
570
590
0610
----316042MA
709915
1
1
1
30
250
270
390
610
950
970
-----------------------------
1
2
2
1
1
1
1
KIT, Wheel Cover, Pewter
-(Incl. Ref. Nos. 190)
COVER, End, Wheel, Pewter
KIT, WHEEL, LEFT, PEWTER
-(Incl. Ref. Nos. 190, 200, 210, 220 & 390)
COVER, End, Wheel, Pewter
BOLT, M6x16, Hex Head
WASHER, M6, Split Lock, MC
WHEEL, Left, 1.75 X 8, Pewter
WASHER, 6 X 18 X 1.5, Flat
KIT, WHEEL, RIGHT, PEWTER
-(Incl. Ref. Nos. 190, 200, 210, 225 & 390)
COVER, End, Wheel, Pewter
BOLT, M6x16, Hex Head
WASHER, M6, Split Lock, MC
WHEEL, Right, 1.75 X 8, Pewter
WASHER, 6 X 18 X 1.5, Flat
KIT, Top Cover
-(Incl. Ref. Nos. 30, 240,250,270,390,550 &950))
NUT, M6, Lock
COVER, Top, Orange
SCREW, M6x16, Hex Washer Head
NUT, M6, CLIP
WASHER, 6 X 18 X 1.5, Flat
HWST, 1/4-15X3/4 BZ
SCREW, M6x40, Hex Flange Head
KIT, Drive Case Cover
-(Incl. Ref. Nos. 250, 270 & 280)
SCREW, M6x16, Hex Washer Head
NUT, M6, CLIP
COVER, Drive Case, Black
KIT, CHUTE MOISTURE COVER
-(Incl. Ref. Nos. 570 & 590)
COVER, Chute Moisture
SCREW, 10X.62 UNSL-HW
KIT, Side Cover, Right
-(Incl. Ref. Nos. 30, 250, 270, 390, 610, 950 & 970)
NUT, M6, Lock
SCREW, M6x16, Hex Washer Head
NUT, M6, CLIP
WASHER, 6 X 18 X 1.5, Flat
COVER, Side, Orange
SCREW, M6x40, Hex Flange Head
SCREW, M5x20, Knob, Self-Tapping
250
270
280
0570
F
t
o
N
1
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
19
u
d
i
t
c
n
o
12-Dec-2022
Hardware Identification & Torque Specifications
Torque Specification Chart
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Property
Class
5.6
8.8
Class 5.6
Class 8.8
in/lbs
Size Of
Hardware ft/lbs
M3
M4
M5
M6
M7
M8
M10
M12
M14
M16
M18
M20
M22
M24
M27
M30
M33
M36
M39
5.88
13.44
26.4
44.64
5.2
7.7
15
26
42
64
89
126
169
217
320
435
590
759
988
10.9
Nm.
Nm.
in/lbs
ft/lbs
.56
1.28
2.50
4.3
7.1
10.5
21
36
58
88
121
171
230
295
435
590
800
1030
1340
13.44
30.72
60.96
7.3
12.1
17.7
35
61
101
147
202
290
390
497
733
995
1349
1740
2249
1.28 19.2
2.90 43.44
5.75 5.97
9.9 10.3
16.5 16.9
25
24
50
48
83 86.2
136
132
210
200
287
275
405
390
559
530
708
375
995 1032
1350 1401
1830 1902
2360 2441
3050 3163
SAE Grade 2
Class 12.9
Size Of
Hardware
Nm.
in/lbs
ft/lbs
Nm.
1.80
4.10
8.10
14
23
34
67
117
185
285
390
550
745
960
1400
1900
2580
3310
4290
22.92
52.56
7.15
12.1
19.9
29
59
103
162
250
346
486
656
840
1239
1681
2278
2935
3798
2.15
4.95
9.7
16.5
27
40
81
140
220
340
470
660
890
1140
1680
2280
3090
3980
5150
20
10
30
40
50
60
80
70
Body Length
Screw, M8- 1.25 x 25
Thread
Diameter (mm)
Threads
Inside
Diameter (in) per inch
1/4
1/2
3/4
1
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
Body
Length (mm)
Body
Length (in)
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
29
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Screw, 1/2- 16 x 2
Nut, 1/2-16
0
Distance between
threads (mm)
Threads
per inch
Thread
Diameter (mm)
Body
Diameter
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
SAE Grade 5
Nm.
100
90
Body
Diameter
Nut, M8
in/lbs
ft/lbs
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
0
No
Marks
Hardware
Grade
12.9
Class 10.9
in/lbs
ft/lbs
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
1/4
1/2
3/4
2
1/4
1/2
3/4
3
1/4
1/2
3/4
4
Common Hardware Types
Hex Head Capscrew
Washer
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is
the Nominal size, meaning the inside diameter is 1/2 inch
(8mm metric thread diameter); if a second number is present
it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50),
this means the Nominal size, or body diameter is 1/2 inch (8mm
metric thread diameter), the second number,16, represents the
threads per inch, (distance between threads). The final number
is the body length of the bolt or screw, 2 inches (50mm).
Lockwasher
Carriage Bolt
Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
M6 Bolt or Nut
Wrench—10mm
M8 Bolt or Nut
Wrench—13mm
M10 Bolt or Nut
Wrench—17mm
7/16” Bolt or Nut
1/2” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench—3/4”
Wrench (Nut)—11/16”
M12 Bolt or Nut
Wrench—19mm
M14 Bolt or Nut
Wrench—22 mm
Copyright © Briggs & Stratton. All Rights reserved
12-Dec-2022

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project