Quick-Reference Guide Quick-Reference Guide

Quick-Reference Guide Quick-Reference Guide
Quick-Reference
Guide
Quick-Reference
Guide
ON Mode
ON Mode
System Monitor Screen
Power
Vehicle
Speed
System Monitor Screen
Vehicle
Speed
Drive Gear
Application of
the SpeedBrake
Engine
temperature
Transmission
Temperature
Drive Gear
Application of
the SpeedBrake
Engine
temperature
Transmission
Temperature
Speedbrake
indicator
status
SpeedBrake
Mode
Power
Speedbrake
indicator
status
SpeedBrake
Mode
Brake
Strength
level
On screen
Alert display
Brake
Strength
level
On screen
Alert display
Home Key
Mode select:
Change between
modes
Home Key
Mode select:
Change between
modes
Menu Key
Increase Braking
strength level
when in on Mode.
decrease Braking
strength level
when in on Mode.
Menu Key
Increase Braking
strength level
when in on Mode.
decrease Braking
strength level
when in on Mode.
1. With vehicle key in “RUN” position, press the PowerPDA 1. With vehicle key in “RUN” position, press the PowerPDA “power” button.
2. If the System Monitor Screen is not displayed as shown above, press the “Banks Brake” icon.
“power” button.
2. If the System Monitor Screen is not displayed as shown above, press the “Banks Brake” icon.
3. Press Up on the 5-way navigation button to toggle 3. Press Up on the 5-way navigation button to toggle between modes. The Mode will be displayed in the lower left hand corner of the PDA screen.
between modes. The Mode will be displayed in the lower left hand corner of the PDA screen.
4. While in the “ON” mode, press left on the 5-way 4. While in the “ON” mode, press left on the 5-way navigation button to decrease Brake Strength and right to increase. Brake Strength will be displayed in the lower center of the PDA screen.
navigation button to decrease Brake Strength and right to increase. Brake Strength will be displayed in the lower center of the PDA screen.
5. Press the center of the 5-way navigation button to access 5. Press the center of the 5-way navigation button to access the System Menu.
the System Menu.
For more detailed information on SpeedBrake features,
consult the Advanced User Manual.
For more detailed information on SpeedBrake features,
consult the Advanced User Manual.
Caution: Using the HIGH setting with a lightly loaded
vehicle will result in VERY aggressive braking activity.
Become familiar with the characteristics of the Strength
settings before encountering slippery road conditions
(i.e. snow or rain).
Caution: Using the HIGH setting with a lightly loaded
vehicle will result in VERY aggressive braking activity.
Become familiar with the characteristics of the Strength
settings before encountering slippery road conditions
(i.e. snow or rain).
©2009 Gale Banks Engineering
11/1/09 PN 97234 v.3.0
©2009 Gale Banks Engineering
11/1/09 PN 97234 v.3.0
Speed Control Mode
Speed Control Mode
System Monitor Screen
Power
Vehicle
Speed
System Monitor Screen
Vehicle
Speed
Drive Gear
Application of
the SpeedBrake
Engine
temperature
Transmission
Temperature
On screen
Alert display
Brake level/
Braking Speed
Menu Key
Increase speed in 1
MPH intervals when
in speed control
mode
Decrease speed
in 1 MPH intervals
when in speed
control mode
1.With vehicle key in “RUN” position, press the PowerPDA “power” button.
2.If the System Monitor Screen is not displayed as shown above, press the “Banks Brake” icon.
3.Press Up on the 5-way navigation button to toggle between modes. The Mode will be displayed in the lower left hand corner of the PDA screen.
Speedbrake
indicator
status
SpeedBrake
Mode
On screen
Alert display
Brake level/
Braking Speed
Mode select:
Change between
modes
Home Key
Menu Key
Increase speed in 1
MPH intervals when
in speed control
mode
Decrease speed
in 1 MPH intervals
when in speed
control mode
Change preset
speed when in
speed control
mode
Engine
temperature
Transmission
Temperature
Mode select:
Change between
modes
Home Key
Drive Gear
Application of
the SpeedBrake
Speedbrake
indicator
status
SpeedBrake
Mode
Power
Change preset
speed when in
speed control
mode
1.With vehicle key in “RUN” position, press the PowerPDA “power” button.
2.If the System Monitor Screen is not displayed as shown above, press the “Banks Brake” icon.
3.Press Up on the 5-way navigation button to toggle between modes. The Mode will be displayed in the lower left hand corner of the PDA screen.
4. While in the “SPEED CONTROL” mode, press left on
4. While in the “SPEED CONTROL” mode, press left on
the 5-way navigation button to decrease target speed and right to increase. Press “Down” on the 5-way navigation button to toggle through preset target speeds.
the 5-way navigation button to decrease target speed and right to increase. Press “Down” on the 5-way navigation button to toggle through preset target speeds.
5.Press the center of the 5-way navigation button to 5.Press the center of the 5-way navigation button to For more detailed information on SpeedBrake
features, consult the Advanced User Manual.
For more detailed information on SpeedBrake
features, consult the Advanced User Manual.
CAUTION: Your Banks SpeedBrake is NOT a substitute
for the hydraulic brakes on your truck. The device will
not correct or compensate for improperly maintained
hydraulic brakes. Also, please be aware that your
Banks SpeedBrake is not designed to be used as a
parking brake or to bring your vehicle to a complete
stop. Your Banks SpeedBrake is a supplementary
braking system designed to help you slow down or
to assist you in maintaining a more constant speed
when descending a grade. Remember that this
SpeedBrake is first and foremost a preemptive device
and it is most efficient when used to help prevent,
rather than correct, a vehicle over speed situation.
CAUTION: Your Banks SpeedBrake is NOT a substitute
for the hydraulic brakes on your truck. The device will
not correct or compensate for improperly maintained
hydraulic brakes. Also, please be aware that your
Banks SpeedBrake is not designed to be used as a
parking brake or to bring your vehicle to a complete
stop. Your Banks SpeedBrake is a supplementary
braking system designed to help you slow down or
to assist you in maintaining a more constant speed
when descending a grade. Remember that this
SpeedBrake is first and foremost a preemptive device
and it is most efficient when used to help prevent,
rather than correct, a vehicle over speed situation.
The use of a Banks SpeedBrake does not increase the load
capacity of your vehicle. Gross combined Weight Rating
specifications should always be adhered to. The Banks
SpeedBrake will allow you to slow your vehicle more
effectively within your vehicle’s weight specifications.
The use of a Banks SpeedBrake does not increase the load
capacity of your vehicle. Gross combined Weight Rating
specifications should always be adhered to. The Banks
SpeedBrake will allow you to slow your vehicle more
effectively within your vehicle’s weight specifications.
access the System Menu.
Gale Banks Engineering
546 Duggan Ave., Azusa, ca 91702
(626) 969-9600 • Fax (626) 334-1743
bankspower.com
Product Information & Sales: (888) 635-4565
access the System Menu.
Gale Banks Engineering
546 Duggan Ave., Azusa, ca 91702
(626) 969-9600 • Fax (626) 334-1743
bankspower.com
Product Information & Sales: (888) 635-4565
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement