Advertisement
Advertisement
Multi Format Broadcast
LCD Monitor
Operation Manual_v3.7
LVM-095W-N2
SRM-095W-N
Contents
1. Caution .................................................................................
2. Main Features ........................................................................
3. Controls & Functions
4. Menu Tree & Adjustment
5. Menu Operations
[1] Picture
[2] Color
[3] Marker
[4] GPI/UMD
[5] Waveform
[6] Audio
[7] Display & Set
6. Button Functions
7. Other Functions
8. Product Specifications
9. Optional Accessories
...............................................................
.........................................................
...................................................................
..............................................................................
.................................................................................
..............................................................................
...........................................................................
...........................................................................
................................................................................
.....................................................................
....................................................................
......................................................................
...........................................................
...............................................................
25
27
35
37
16
18
21
22
12
12
13
14
04
06
07
11
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential to correct the interference at his own expense
CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packing indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequence for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.
Multi Format LCD Monitor 3
1. Caution
•
Always use set voltage. (DC 12~24V)
•
When using a DC Adapter other than the
one supplied by the manufacturer, please
be advised that the adapter with
the monitor.
DC 12V/3A ~ 6A can be compatible with
• All operating instructions must be read and
understood before the product is operated.
These safety and operating instructions must
be kept in a safe place for future reference.
• All warnings on the product and in the
instructions must be observed closely.
• All operating instructions must be followed.
• Do not use attachments not recommended
by the manufacturer. Use of inadequate
attachments can result in accidents.
• This product must be operated on a power
source specified on the specification label.
• If you are not sure of the type of power supply
used in your home, consult your dealer or local
power company. For units designed to operate
on batteries or another power source, refer to
the operating instructions.
• The power cords must be routed properly
to prevent people from stepping on them or
objects from resting on them. Check the cords
at the plugs and product.
• In case of using other 12V DC adapters instead
of the standard adapter provided by the
manufacturer, please check the proper load
capacity (or current capacity) and use an
adapter with stable voltage.
• Do not overload DC outlets or extension cords.
Overloading can cause or electric shock.
• Never insert an object into the product through
vents or openings. High voltage in the
product, and inserting an object can cause
electric shock and/or short internal parts. For
the same reason, do not spill water or liquid on
the product.
• Do not attempt to repair the product yourself.
Removing covers can expose you to high
voltage and other dangerous conditions.
Request a qualified service person to perform
servicing.
• If any of the following conditions occur, unplug
the power cord from the DC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or
when objects have fallen into the product.
c. When the product has been exposed to rain
or water.
d. When the product does not operate properly
as described in the operating instructions.
Do not touch the controls other than those
described in the operating instructions.
Improper adjustment of controls not
described in the instructions can cause
damage, which often requires extensive
adjustment work by a qualified technician.
e. When the product has been dropped or
damaged.
f. When the product displays an abnormal
condition. Any noticeable abnormality in the
product indicates that the product needs
servicing.
• In the case the product needs replacement
parts, make sure that the service person uses
replacement parts specified by the manufacturer,
or those with the same characteristics and
performance as the original parts. Use of
unauthorized parts can result in fire, electric
shock and/or other danger.
• Upon completion of service or repair work,
request the service technician to perform safety
checks to ensure that the product is in proper
operating condition.
4 Multi Format LCD Monitor
1. Caution
• When mounting the product on a wall or ceiling,
be sure to install the product according to the
method recommended by the manufacturer.
• Unplug the power cord from the DC outlet
before cleaning the product. Use a damp cloth
to clean the product. Do not use liquid cleaners
or aerosol cleaners.
• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.
• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.
• Keep the product away from direct rays of the
Sunlight.
• Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an
unstable base can cause the product to fall,
resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the
manufacturer or sold with the product. When
mounting the product on a wall, be sure to
follow the manufacturer’s instruction. Use only
the mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a cart, it
must be moved with the utmost care.
• Sudden stops, excessive force and uneven
floor surface can cause the product to fall from
the cart.
• Infrared devices can cause noise or malfunction
under condition as below.
a. parts of the body come into contact with the
infrared transmiter or acoustic device.
b. Obstacles can cause electrical changes if
there is a partition in the middle or in the wall.
c. Exposure to radio interference from medical
equipment, microwave ovens, wireless LAN
devices, etc. with the same frequency band.
• The vents and other openings in the
cabinet are designed for ventilation. Do not
cover or block these vents and openings since
insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation
openings. This product is not designed for
built-in installation; do not place the product
in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the
manufacturer’s instructions are followed.
• In the case of installing the product on a rack,
the inside of the product may be overheated
due to the heat from other devices nearby and
the decrease of air circulation, which could
damage to the monitor. To prevent the damage,
please have enough space for the monitors
and use a fan to avoid overheating and
maintain the operating temperature. (Refer to
the specification of the product).
• The LCD panel used in this product is made of
glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful
not to be injured by broken glass pieces in case
the LCD panel breaks.
• Keep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including amplifiers).
• The LCD panel used in this monitor is
manufacturered with high precision technology
and has more than two million pixels or more
than six million sub-pixels to reproduce the
high resolution images. But, some of the pixels
in the LCD screen may be stuck to show either
always on (red, green, blue) or always off (black
or dark). TVLogic guarantees more than 99.999%
of the sub-pixels are operating normally and
less than 0.001% of the sub-pixels may be
defective. Some sub-pixels may spontaneously
become defective after long period of time,
but this is not a malfunction of the monitor.
Evaluation of the pixel defect is recommended
to be performed in a dim condition with
the illuminance of more than 100 lux, and the
viewing distance should be more 30cm from
the screen.
Multi Format LCD Monitor 5
2. Main Features
LVM-095W-N2 / SRM-095W-N Monitors contain the following features:
•
Compatible with various SDI signals
formats
- This product is compatible with various SDI
signals - 480i, 576i, 720p, 1035i, 1080i, 1080p,
1080psf
•
All-in-one type system
- Slim and all-in-one type monitor that
supports various functions that requires no
other accessories.
•
Wide Screen / 24Bit RGB FHD Panel
•
Waveform/Vector Scope/Audio Level
Meter Function
- Waveform & Vector Scope
- Embedded Audio Level Meter
•
Audio In/Out
- Internal Speaker(Embedded audio & External
Audio Input)
- Stereo Audio Out through phone Jack &
External Audio Input
•
Knob Control
- Easy to adjust user configuration using the
control knob on the front of the monitor.
•
BLUE ONLY/MONO Function
•
H/V delay Function
•
Markers & Safety Areas
- Center Marker, Safety Area Marker, Aspect
Marker, Display Size(Scan)
•
Pixel To Pixel Function
- Used to display the original image resolution
without scaling.
•
External control function
- This product can be controlled by using
parallel switch, RS-422 and Network simply
with cable connection without additional
peripheral equipment attached to the unit.
•
RS422/UMD feature support
- This product supports protocols provided by
TVLogic or a TSL protocol.
•
Power
- Basically, the product is powered by a normal
DC source.
- The product can be battery-powered.
* LVM-095W-N2 / SRM-095W-N : DC12V/24V
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
•
Additional features
- Loop Through (SDI), VESA Mounting Standard,
OSD user interface and Rack Mountable.
- LVM-095W-N2 : 400cd/ m
2
Luminance, 750 : 1
Contrast
- SRM-095W-N : 800cd/ m
2
Luminance, 750 : 1
Contrast
6 Multi Format LCD Monitor
3. Controls & Functions
LVM-095W-N2 / SRM-095W-N : FRONT
CHROMA
BRIGHT
APERTURE
SOURCE
SDI
CHROMA
BRIGHT
SOURCE
SDI
SCAN
ASPECT
MARKER
H/V DELAY
BLUE/MONO
SCAN
W-FORM/VECTOR
ASPECT
MARKER
H/V DELAY
LVM-095W-N2 / SRM-095W-N : REAR
W-FORM/VECTOR
TALLY
SDI-IN A/B
AUDIO OUT
HDMI
AUDIO IN
AUDIO OUT
HDMI
TALLY
REMOTE
TALLY
USB
REMOTE
CONTRAST
VOLUME
UP
MENU
CONTRAST
UP
MENU
POWER
ENTER
DOWN
F3
F2
POWER
F1
ENTER
DOWN
F3
F2
F1
DC IN
Multi Format LCD Monitor 7
3. Controls & Functions
LVM-095W-N2 / SRM-095W-N : FRONT
•
[SDI] Button/Lamp
- Used to select SDI-A/B input.
•
[SOURCE] Button/Lamp
- Used to select Composite input or HDMI
input.
•
[SCAN] Button/Lamp
- Used to change the scan mode.
- Press the button to activate through the scan
modes: [ZEROSCAN] -> [OVERSCAN] -> [PIXEL
TO PIXEL] -> [USER ASPECT] -> [ZEROSCAN]
* PIXEL TO PIXEL mode is not available in
graphic mode.
* [USER ASPECT]: User can adjust width and
height of the display.
* Check “7. Other Functions [1] User Aspect”
for more information.
•
[BLUE]/[MONO] Button/Lamp
- Activates in the order of [Off]-[Blue Only]-
[Mono]-[Off]
- Press the button to remove red and green
from the input signal and display the screen
only under a blue signal. Press the button
again to activate mono mode.
•
[WAVEFORM/VECTOR] Button/Lamp
- Used to activate/deactivate the Waveform.
- The type of Waveform at work can be selected
on the main menu.
•
[F1][F2][F3] Button/Lamp
- Used to activate the [F1]~[F3] function.
* Check “7. Other Functions [1] User Aspect”
for more information.
•
[ASPECT] Button/Lamp
- Used to change the various display ratio.
Activates in order of [16:9] – [4:3] – [2.35:1] -
[1.85:1] – [15:9] – [16:10] – [AUTO] – [16:9].
•
[MARKER] Button/Lamp
- Used to activate/deactivate the Marker. The
type of marker at work can be selected on the
main menu.
•
[H/V DELAY] Button/Lamp
- Used to check horizontal sync and vertical
sync simultaneously by moving the display
left, right, up and down.
- In this mode, the brightness of the image
automatically increase for easy verification of
synchronized signals.
8 Multi Format LCD Monitor
3. Controls & Functions
LVM-095W-N2 / SRM-095W-N : FRONT
•
[MENU] Button
- Used to activate the OSD menu.
- When the OSD menu is activated, press this
button to exit from the menu.
•
[TALLY] Lamp
- Tally lamp that can be toggled in green or
red using the REMOTE(RJ-45) port or RS-422
serial communication.
•
[UP] / [DOWN] Button
- Used to move within the menu when the OSD
menu is activated and is also used to increase
or decrease the value of selected feature.
•
[ENTER] Button
- Used to select the feature of main menu and
the sub menus.
•
[POWER] Switch
- Used to turn the power on and off. If the signal
is normal, Green LED light is indicates. If the
signal is unsupported or disconnected, LED
light flashes in Yellow.
•
[POWER INDICATOR] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is
disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green
LED light.
- The Green light turns off when the monitor is
Normal(active) mode without input signal.
•
[APERTURE] Knob
- Used to adjust the picture sharpness.
- The value is selectable between -12 ~ 12.
•
[BRIGHT] Knob
- Used to adjust the degree of brightness.
- The value is selectable between -100 ~ 100.
•
[CHROMA] Knob
- Used to adjust the saturation of the image.
- The value is selectable between -50 ~ 50.
•
[CONTRAST] Knob
- Used to adjust the contrast.
- The value is selectable between -100 ~ 100.
•
[VOLUME] Knob
- Used to adjust the volume for internal speaker
and external output.
- The value is selectable between 0 ~ 30.
Multi Format LCD Monitor 9
3. Controls & Functions
LVM-095W-N2 / SRM-095W-N : REAR
•
TALLY (LAMP)
- Interlocks with front tally lamp.
•
SDI-A (BNC)
- HD/SD SDI signal input.
•
SDI-B / CVBS (BNC)
- HD/SD SDI signal or CVBS signal input
•
AUDIO IN (Phone jack)
- Internal speakers stereo audio input terminal.
•
AUDIO OUT (phone jack)
- Built in audio disembedder and internal
speakers stereo audio output.
•
USB
- This terminal is used to upgrade the firmware
or color calibration made by TVLogic.
•
REMOTE (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE
section of OSD menu.
•
DC IN (XLR, 4 pins)
- DC power input terminal for DC 12V/24V.
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
DC IN socket
1: GND
4: +12V/
+24V
4
1
3
2
< Warning ! >
When using the product make sure to ground, whenever possible, before connecting the input signal cable in order to prevent any possible damage to the product or connected devices. The damage may include signal noise, malfunction of main board or display panel.
And the connected devices such as camera or video source player may also be influenced through signal cable. Please check if the AC power source and the power extender or power distributor is grounded.
10 Multi Format LCD Monitor
4. Menu Tree & Adjustment
[1] Menu Tree
•
OSD(On-Screen Display) Menu helps you
use various functions.
•
This Picture is the menu structure for
LVM-095W-N2 / SRM-095W-N
[3] Menu Control Sequence
•
Menu Control sequence follows the order
below:
1. Press the MENU button to activate the OSD
menu.
2. Move to a desired menu with the UP/DOWN
button.
3. Press the ENTER button to select a menu
and move to a sub-menu with the UP/DOWN
button.
4. Press the ENTER button to select the desired
sub-menu. (The selected sub-menu will be
highlighted)
5. Press the ENTER button or the MENU button
to save the new value after adjusting the
value with the UP/DOWN button.
6. Press the MENU button to return to the
previous menu and if there is no previous
menu, the OSD menu will be removed from
the screen.
[2] Menu Control
•
User may control various functions using
the MENU, UP, DOWN, ENTER buttons on
the bottom front of the monitor.
Multi Format LCD Monitor 11
5. Menu Operations
[1] Picture
•
NTSC Setup
- This function is not supported since the
LVM-095W-N2 / SRM-095W-N doesn’t
support Analog input signal.
•
Knob Lock
- Locks the Knob control Knob(Aperture,
Bright, Chroma, Contrast, Volume).
•
Brightness
- Used to set the brightness(=offset) level from
-100 to 100.
* Brightness can be adjusted by using [BRIGHT]
control knob on the front of the monitor.
•
Contrast
- Used to set the contrast(gain) level from -100
to 100.
* Contrast can be adjusted by using
[CONTRAST] control knob on the front of the
monitor.
•
Chroma
- Used to set the saturation level from -50 to 50.
* Chroma can be adjusted by using [CHROMA]
control knob on the front of the monitor.
•
Phase
- This function is not supported since the
LVM-095W-N2 / SWM-095W doesn’t support
Analog input signal.
•
Aperture
- Used to set the sharpness level from -12 to 12.
* Aperture can be adjusted by using [Aperture]
control knob on the front of the monitor.
12 Multi Format LCD Monitor
5. Menu Operations
[2] Color
•
Color Temp.
- Used to select the among preset color
temperatures or adjust the customized color
temperature of the monitor.
- Preset color temperatures are 5600K, 6500K,
9300K and User1/2/3.
- In User 1/2/3 modes, user can define custom
RGB GAIN, BIAS (=Offset) and ColorCopy
values.
•
Gain Red
- Used to set Red Gain(or Picture, Contrast)
level from -256 to 255.
* Only available in User 1/2/3 mode.
•
Gain Green
- Used to set Green Gain(or Picture, Contrast)
level from -256 to 255.
* Only available in User 1/2/3 mode.
•
Gain Blue
- Used to set Blue Gain(or Picture, Contrast)
level from -256 to 255.
* Only available in User 1/2/3 mode.
•
Bias Red
- Used to set Red Bias(or Offset, mainly affects
on Black level) from -100 to 100.
* Only available in User 1/2/3 mode.
•
Bias Green
- Used to set Green Bias(or Offset, mainly
affects on Black level) from -100 to 100.
* Only available in User 1/2/3 mode.
•
Bias Blue
- Used to set Blue Bias(or Offset, mainly affects
on Black level) from -100 to 100.
* Only available in User 1/2/3 mode.
•
Color Copy
- Used to copy the R/G/B Gain value of pre-
stored color temperature settings.
- In User mode, find and select the color
temperature and press the Enter button to
copy and apply the Gain value to Gain Red,
Gain Green, Gain Blue.
* Only available in User 1/2/3 mode.
•
Temperature Adaptive Color
- [On] : Used to measure and compensate
the color temperature shift caused by panel
temperature variation.
- [Off] : Used to apply preset color temperature
setting regardless of the panel temaperature.
•
Gamma
- Used to change the Gamma Curve between
2.2 and 2.4.
Multi Format LCD Monitor 13
5. Menu Operations
[3] Marker
•
Fit Marker
- Used to activate or inactivate the Fit Marker
function.
- When the Marker type is selected in the
Marker menu, a border line of the Safety Area
will be displayed inside the Marker. Images
below show the difference between Fit
Marker On and Off.
•
Marker
- Used to activate the Marker function.
- Available marker types are Off, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3 and User.
* This function operates only after activating
the Marker function by pressing the MARKER
button on the front of the monitor.
•
Center Marker
- Displays the Center Marker on the screen.
* This function operates only after activating
the Marker function by pressing the MARKER
button on the front of the monitor.
•
Safety Area
- Used to select to display and control the size
and availability of the Safety Area.
- Available sizes are 80%, 85%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9,
EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU
ACTION 4:3 and EBU GRAPHIC 4:3.
* This function operates only after activating
the Marker function by pressing the MARKER
button on the front of the monitor.
• MARKER : 4:3
• SAFETY AREA : 90%
• FIT MARKER : OFF
• MARKER : 4:3
• SAFETY AREA : 90%
• FIT MARKER : ON
•
Marker Mat
- Used to set the darkness level outside of the
Marker area from Off(transparent) to
7(Black).
- The bigger the value, the darker the color.
•
Marker Color
- Used to set the color of the Marker lines.
Available colors are White, Gray, Black, Red,
Green and Blue.
•
Thickness
- Used to set the thickness of the Makrer lines.
- Thickness level is from 1 to 7 by the pixel unit.
14 Multi Format LCD Monitor
5. Menu Operations
[3] Marker
•
User Marker H1
- Used to set the position of the first horizontal
marker line.
- Displayed when Marker menu is set to User.
•
User Marker H2
- Used to set the position of the second
horizontal marker line.
- Displayed when Marker menu is set to User.
•
User Marker V1
- Used to set the position of the first vertical
marker line.
- Displayed when Marker menu is set to User.
•
User Marker V1
- Used to set the position of the second vertical
marker line.
- Displayed when Marker menu is set to User.
Multi Format LCD Monitor 15
5. Menu Operations
[4] GPI / UMD
•
This item activates/ deactivates the
REMOTE function.
- The user may connect an RJ-45 jack to the
REMOTE terminal on the rear of the unit and
designate a function for each pin.
PIN 1 : HDMI Channel
PIN 2 : SDI-A Channel
PIN 3 : SDI-B Channel
PIN 4 : Tally R
PIN 5 : Tally G
PIN 6 : Blue Only
PIN 7 is POWER ON/OFF use only,
PIN 8 is GND.
- The selectable values are as follows :
REMOTE (RJ-45)
1 8
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
- The selectable values are as follows :
Menu
Classification
Settable Values
PIN
1~6
None,
HDMI CHANNEL,
SDI-A CHANNEL,
SDI-B CHANNEL
TALLY RED,
TALLY GREEN
BLUE ONLY
UNDERSCAN
ASPECT
HVDELAY
16:9 MARKER,
15:9 MARKER,
14:9 MARKER
13:9 MARKER,
4:3 MARKER,
4:3 ON AIR MARKER
1.85:1 MARKER,
2.35:1 MARKER,
1.85:1 & 4:3 MARKER
CENTER MARKER
SAFETY AREA 80%,
SAFETY AREA 88%,
SAFETY AREA 90%
SAFETY AREA 93%,
SAFETY AREA 100%
16 Multi Format LCD Monitor
5. Menu Operations
[4] GPI / UMD
•
Monitor ID
- Sets the ID of each monitor for the TVLogic
control protocol or DYNAMIC UMD using RS-
422 communication.
- Available values are between 0 ~ 125.
•
UMD Display
- This item sets UMD, ANC and DYNAMIC UMD.
* UMD : Displays user customized characters
on screen.
* ANC: Displays characters embedded in SDI
signal.
* D-UMD(TVL S8C) : Displays incoming data of
8 characters and tally signal from TVLogic
remote control program.
* D-UMD(TVL S16C) : Displays incoming data
of 16 characters and tally signal from TVLogic
remote control program.
* D-UMD(TVL D8C) : Displays incoming data
of two pairs of 8 character strings and tally
signals from TVLogic remote control
program.
* D-UMD(TSL S8C) : Displays incoming data of
8 characters and tally signal from TSL protocol.
* D-UMD(TSL S16C) : Displays incoming data of
16 characters and tally signal from TSL protocol
(V3.1).
* D-UMD(TSL D8C) : Displays incoming data
of two pairs of 8 character strings and tally
signals from TSL protocol.
•
UMD Character
- Customizes the characters for Under Monitor
Display.
- Alphabets, numbers and special symbols are
available.
- Maximum of 5 characters can be used.
•
UMD Character Color
- Used to set the character color of UMD.
- Available colors are White, Red, Green,
Blue, Yellow, Cyan and Magenta.
- This function is activated when the [D-UMD
tally type] is in the [Default], [User color], [BG.
Color], [User tally] and [User BG] modes.
•
UMD B.G. Trans.
- Used to set the transparency of the UMD
background.
- Available values are [Opaque], [50%], [85%]
and [100%].
•
UMD Size
- This function adjusts the size of UMD font and
UMD background.
- Available modes are Small and Large.
Multi Format LCD Monitor 17
5. Menu Operations
[4] GPI / UMD [5] Waveform
•
D-UMD Tally Type
- Tally type configuration setting in D-UMD(D-
8C), UMD Display.
- Configuration values are Default, User
Color, Character, BG. Color, User Tally,
User Char and User BG.
* Default : Existing TV Logic operating system (VRT)
* User Color : User configuration settings on
each Tally color type.
- Tally1 Color ~ Tally4 Color are activated
when USER COLOR is selected.
* Character : Tally displays with the character
color. Activates the same as Default model.
* BG. Color : Tally is displayed as the
background of character. Activate the same
as Default mode.
* User Tally : The bit0 & bit 1 of TSL Protocol
Control Byte receives the input signal and
displays Tally by user’s set (Off, White, Red,
Green, Blue, Yellow Cyan, Magenta)
* User Char : This function activates in the
same way as User Tally and Tally is displays
by the Character color.
* USER BG. : This function activates in the same
way as User Tally and Tally is displays in the
background of the character.
•
Tally1 ~ Tally4 Color
- Used to set the color of each Tally 1, Tally 2,
Tally 3 and Tally 4.
- Available colors are Red, Green and Yellow.
•
B0:0 B1:0 ~ B0:1 B0:1
- The Byte0, Byte1 of TSL Protocol Control Byte
sets the color of the input conditions.
- Available colors are Off, White, Red, Green,
Blue, Yellow, Cyan and Magenta.
18 Multi Format LCD Monitor
•
Press [W-FORM/VECTOR] Button to
activate the Waveform.
•
Waveform/Vector
- This function sets the Waveform and
Vectorscope. Available options are different
according to the Input signal.
- Activates in the order:
- YCbCr: Off - Waveform - VectorScope -
Waveform Wide - Waveform YCbCr - Wave_
Vector - Vector_YCbCr - Full Waveform(Y) -
Full VectorScope.
- RGB : Off - RGB.
•
Waveform Intensity
- Controls the brightness of the Waveform/
Vector display.
- Available values are between 1 ~ 63.
The higher the number the brighter the
waveform will be.
•
Waveform Trans.
- Controls the transparency level of the
Waveform/Vector.
- Available values are OPAQUE and TRANS.
* If the main OSD overlaps with the Waveform/
Vector when the option us set to OPAQUE, it
will automatically display it as transparent
and change back to opaque when the main
OSD disappears.
•
Waveform Size
- Controls the size of Waveform/Vector
- Available modes are Normal and Large.
5. Menu Operations
[5] Waveform
•
Line Select Enable
- Used to select specific Vertical Line for
Waveform/Vectorscope.
- It is available when LINE Waveform is
activated.
- To activate this feature, press the [W-FORM/
VECTOR] Button, then use the [UP]/[DOWN]
Button to select a desired vertical line.
- Control range varies according to the
resolution of the input SDI signal.
* 576i : Min. 1, Max. 625
* 480i : Min. 1, Max. 525
* 720p : Min. 1, Max. 750
* 1080i : Min. 1, Max. 1125
* 1080p : Min. 1, Max. 1125
•
Luma(Y’) Zone Check
- Displays the Luma(Y’) level of the input image
in colors.
- May select between [Color Pattern] or [Zebra
Pattern].
- Each pixel’s Y’ analized and changed to a certain
color or zebra pattern according to the Index on
the right side of the screen.
- When a pixel’s Y’ level is under 0%(16), the color /
diagonal line will be colored Green.
- When the pixel’s Y’ level is over 100%(235), the
color / diagonal line will be colored Red.
- When the Y’ level of a pixel is between 0~100%,
the pixel is displayed with Gray, except for
selected Luma Zone.
- In the [Color Pattern] mode, a 5% zone of the
selected Y’ level will be colored Pink(5%) and
±10% will be colored Yellow(-10% from Pink) and
Cyan(+10% from Pink).
- In the [Zebra Pattern] mode, ± 5% of the selected
Y’ Level will be displayed with diagonal lines.
•
Luma(Y’) Zone Adjust
- Used to set the Y’ level to be colored Yellow,
Pink and Cyan in [Color Pattern] mode, or to
set Y’ level zone to be displayed with diagonal
lines in [Zebra Pattern] mode.
- Available values are 0 ~ 100%.
* See section “7. Other Functions -> [5] Luma(Y’
Zone Check” for more information.
Multi Format LCD Monitor 19
5. Menu Operations
[5] Waveform
•
Range Error
- Used to set whether or not to activate Y
MAX, Y MIN, C MAX, C MIN, Y PICTURE BLINK
and C PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN shall blink.
* In the case of RGB input, Range Error is not
supported.
* See section “7. Other Functions -> [7] Range
Error” for more information.
•
Y Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and display in red on
the Waveform.
•
Y Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and display in red on
the Waveform.
•
C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
•
C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
•
Y Picture Blink
- Used to set whether or not to blink pixels for
values exceeding Y MAX and Y MIN.
•
C Picture Blink
- Used to set whether or not to blink pixels for
values exceeding C MAX and C MIN.
20 Multi Format LCD Monitor
5. Menu Operations
[6] Audio
•
Volume
- Used to control the output volume of the
internal speakers or [AUDIO OUT] on the back
of the monitor.
- Control range is from 0 to 30.
•
Em. Audio Left
- Used to set embedded audio channel for left
audio out of internal speaker or [AUDIO OUT]
terminal on the back of the monitor.
- Available values are between CH1~CH16 and
Ext..
* In the HDMI mode, Left is set to CH1.
•
Em. Audio Right
- Used to set embedded audio channel for right
audio out of internal speaker or [AUDIO OUT]
terminal on the back of the monitor.
- Available values are between CH1~CH16 and
Ext..
* In the HDMI mode, Right is set to CH2.
•
Level Meter
- Used to set the Level Meter for the embedded
audio.
- Available options are OFF,16 CH(HOR.) and 16
CH(VER.)
* 16 CH(HOR.) : Displays 8 channels on top
left and 8 channels on top right of the screen
horizontally.
* 16 CH(VER.) : Displays 8 channels on center
left and 8 channels on top right of the screen
vertically.
* In the HDMI mode, only 2 channels may be
displayed.
•
Level Meter Display
- Used to set the display method for audio level
meter.
- Available modes are Group and Pair.
* In the HDMI mode, the mode is set to Pair.
•
Level Meter Reference
- Display the default audio level meter value.
- Available options are -18dB and -20dB.
- Audio level meter within selected value turns
to green and exceeded audio level is
displayed in yellow.
- Audio level exceeding -4dB is displayed in
red.
•
Level Meter Size
- Used to control the size of the audio level
meters.
- Available options are NORMAL and LARGE.
•
Peak Decay Time
- Sets the reduction time for the max value
indication of audio signals.
- Control range is from 0 to 100. Bigger number
means a longer display time for max value.
Multi Format LCD Monitor 21
5. Menu Operations
[7] Display & Set
•
System Default
- Used to initialize OSD values to factory
default.
•
Eco Saving
- Automatically save power consumption if
there is no signal. When signal is fed,
brightness of the monitor will be set as
setting value.
•
Back Light
- Used to indicate the backlight level.
- In the case of System Default, the value returns
to factory default (after color calibration).
- Available values are from 0 to 50.
•
Internal Pattern
- Generates ColorBar and Grayscale Pattern
internally.
- Selectable range for Gray Pattern is from 0%
to 100% with 5% increment.
* See section “7. Other Function -> [10]
Internal Pattern” for more information.
•
H/V Flip
- Allows the displayed image to be flipped
horizontally or vertically.
- This feature provides flexible mounting
options for camera operators.
- Activates in the order :
[Off] – [H Flip] – [V Flip] – [H/V Flip].
* This function is not supported when the
1920 x 1080 50p.
•
3G Format
- Used to select 3G-SDI A/B input format
among Normal Mode (Auto : A422
10Bit_YCbCr. 50/60p), A 444 10/12Bit_YCbCr,
A 444 10/12Bit_RGB, A 422 12Bit_YCbCr, B
444 10/12Bit_YCbCr, B 444 10/12Bit_RGB, B
422 12Bit_YCbCr, B 422 10Bit_YCbCr 50/60p.
- In NORMAL MODE, the signal is automatically
detected when Payload signal is contained.
* In the HDMI mode, this function is not
supported.
•
Firmware Version
- Displays current firmware version.
•
Serial Number
- Displays Serieal Number.
22 Multi Format LCD Monitor
5. Menu Operations
[7] Display & Set
•
Zoom
- Used to magnify the image up to 90% on a
pixel basis and display on full screen.
for more information.
•
Zoom H/V Scroll
- Activated when [Zoom] mode is selected.
- Used to move the enlarged image to the left/
right or Up/Down by controlling with the
Knob.
•
DSLR Camera Sel.
- Select the DSLR camera to be used with LVM-
095W-N2. Available models are [CANON
5D/7D], [SONY A77] and [NIKON D7000].
Live / Record / Playback modes vary
depending to their manufacturer.
•
DSLR Camera Scale (HDMI Format Only)).
- This is a special function for CANON/ NIKON/
SONY DSLR cameras.
- Used to scale the image with different
resolution as to the operation mode(Live
View/ Record/ PlayBack) of the camera to fill
the full screen.
* See section “7. Other Functions [8] DSLR
Scale” for more information.
•
Closed Caption
- This item selects Closed Caption.
- Available modes are OFF, 708, 608(LINE21)
and 608(ANC).
* 608 : CEA-608-B, 708 : CEA-708-C standard
display only.
•
TimeCode Enable
- Used to set the time code among Off, VITC
and LTC.
•
Focus Assist
- Focus Assist helps the shooters to easily find
out the exact area in the picture that is in
focus, simply by adding colors on the
boundaries of the subject in the picture.
- Activates in the order of [Off] - [Mono On] –
[Color On].
* (Mono) On : The boundary of the area with
good focus is colored with the designated
color, while the rest of the areas(pixels)
receive only Y’(Luma) signals and become
black & white image.
* (Color) On : Only the boundary of the area
with good focus is displayed with the
designated color.
* See section “7. Other Functions [6] Focus
Assist” for more information.
•
Focus Assist Color
- Used to select a color for Focus Assist among
red, green and blue.
- This feature is available only when the Focus
Assist mode is activated.
•
Focus Assist Level
- Used to set the edge difference value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
difference of the edges exceeds the
previously set value.
- This feature is available only when the Focus
Assist mode is activated.
Multi Format LCD Monitor 23
5. Menu Operations
[7] Display & Set
•
KeyLed Indication
- Used to control the Key Lamp on the front of
the monitor.
- If the button with LED is pressed with the
KEY LED Off, LED comes on but turns off after
3 seconds later.
•
S/W upgrade
- Used to upgrade the firmware using USB
(Thumb drive).
* See section “7. Other Functions -> [11]
Firmware Upgrade” for more information.
•
S/W upgrade start
- Used to start S/W upgrade. If USB drive is
detected, the firmware upgrade becomes
activated.
24 Multi Format LCD Monitor
6. Button Functions
[1] SDI Input Button
•
LVM-095W-N2 / SRM-095W-N unit is
capable of processing dual SDI Input
signal.
1. Press the[SDI] button on the front of the
monitor and activate the OSD menu as
shown on the below.
2. Input resolution displays on the bottom of
the OSD screen.
3. Press the [SDI] button again to remove the
OSD menu from display.
* If no image displays after selecting the
desired input mode, check and make sure that
your connection is not lose or disconnected.
[2] SOURCE Button
•
LVM-095W-N2 / SRM-095W-N unit is
capable of processing Single HDMI and
CVBS Input signal.
1. Press the [SOURCE] button on the front of
the monitor and activate the OSD menu as
shown on the below.
2. Input resolution displays on the bottom of
the OSD screen.
3. Select HDMI or COMPOSITE by pushing Key
button.
* If no image displays after selecting the
desired input mode, check and make sure that
your connection is not lose or disconnected.
Multi Format LCD Monitor 25
6. Button Functions
[3] SCAN Button
•
LVM-095W-N2 / SRM-095W-N supports
various scan modes.
1. Press [SCAN] button continuously to
activate various scan modes:
OVER SCAN -> Pixel to Pixel ->
User Aspect -> ZERO SCAN
2. The following represents the different types
of scan mode. When a scan mode is
selected, display skips the next mode if its
required condition is not met.
- OVER SCAN : Zooms in/out of the image
to 96% of its original size without changing
the aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- Pixel to Pixel : 1:1 pixel mapping of original
image. This feature is available only when
the size of the original image is bigger than
the screen size.
[5] Function Key Set Button
•
Used to make a quick setting of the
Function Key.
1. Press the function button(F1~F3) on the
front of the monitor for more than 2 seconds
and activate the OSD menu as follows.
2. Move to a desired function with the[UP/
DOWN] button and press the [ENTER]
button to select.
3. Once the function is set, press the Function
button(F1~F3) to activate the function.
[4] ASPECT Button
•
LVM-095W-N2 / SRM-095W-N supports
various aspect ratio.
1. Press [ASPECT] button on the front of the
monitor to activate various aspect ratio.
2. Press [ASPECT] button continuously to
activate various aspect ratio: 4:3 -> 2.35:1 ->
1.85:1 -> 15:9 -> 16:10 -> AUTO -> 16:9
26 Multi Format LCD Monitor
7. Other Functions
[1] User Aspect
•
Used to adjust the Width /Height display
ratio.
1. Press the [Aspect] button on the front of the
monitor to activate the [USER ASPECT] mode.
2. After the activation, press the [ENTER]
button to begin controlling. Adjust the ratio
using the [UP]/[DOWN] button.
- Adjust the ratio using the [UP]/[DOWN]
button.
- Control range for width : Min. 0~ Max. 1920.
- Control range for height : Min. 0~ Max. 1080.
- The size-adjusted picture always stays in the
center of the screen.
- The size can be adjustable with 2 increment
and decrement.
Multi Format LCD Monitor 27
7. Other Functions
[2] Waveform / Vectorscope
•
Waveform Y
- Displays the Luma(Y’) component of the input
signal into waveform.
•
Vectorscope
- Displays the color components ‘B-Y’ and
‘R-Y’of the input signals onto the X-Y axis.
- Two different types of Vetorscopes are
displayed according to SD or HD input signals.
- 100% and 75% scales are indicated on the
Vetorscope.
•
Waveform Cb, Cr
- Displays the Cb, Cr components of the input
signal into waveform.
100%
75%
•
The Waveform/ Vectorscope function can
be used only when the input signal is YUV.
•
In the case of RGB input, Waveform RGB is
supported.
•
Available modes in the YUV signal:
- Waveform Y
- Vectorscope
- Waveform Wide
- Waveform Y Cb Cr
- Wave_Vector
- Vector_YCbCr
- Full Waveform(Y)
- Full Vectorscope
28 Multi Format LCD Monitor
7. Other Functions
[3] Line Select (Waveform/Vectorscope)
•
Used to select specific Vertical Line for
Waveform / Vector.
- It is available when the Line Waveform is
activated.
- To activate this feature, go to [Waveform]-
[Waveform/Vector]-[Line Waveform]-
[Select Line Position] and use the [UP]/
[DOWN] button to select a vertical line.
- Selected line is indicated in White on the
screen.
- Control range varies according to the
resolution of the input SDI signal.
* PAL : 0~625
* NTSC : 0~525
* 720p : 0~750
* 1080 i/p : 0~1125
- Control range for HDMI signal varies
according to the output resolution of
the signal.
- Selected line is indicated on the screen.
[4] Zoom
•
Used to magnify the input signal from 0%
to 90%.
•
Supports Zoom Width Scroll / Zoom
Height Scroll function.
•
Zooms IN/OUT focused on the scrolled
area.
<ZOOM OFF>
<ZOOM 50%>
<ZOOM 75%>
Multi Format LCD Monitor 29
7. Other Functions
[5] Luma(Y’) Zone Check
•
Color Pattern Type.
- Displays the Luma(Y’) level of the input image
in colors.
- Y’ ≥ 100% : Pixels with higher Y’ level than 100
turn red.
- Y’ ≤ 0% : Pixels with lower Y’ level than 0 turn
green.
- Pixels with Y’ levels designated by the user
are displayed in following colors - yellow,
pink, cyan.
- Factory Default Y’ (Border line between
pink and yellow) level is 75% and pink color
is assigned to pixels with Y’ level from 70% to
75%.
- Yellow color is assigned to pixels with Y’ level
from 75% to 85%, and Cyan from 60% to 70%.
This function is designed for a better
performance in setting the exposure of
lighting when shooting with vDSLR cameras.
•
Zebra Pattern Type
- Displays the pixels with designated Luma(Y’)
levels with zebra pattern.
- Y’ ≥ 100%: Pixels with Y’ level over 100% turn
into red diagonal stripes.
- Y’ ≤ 0% : Pixels with Y’ level under 0% turn into
green diagonal stripes.
- User defined Y’ levels are displayed as black
diagonal stripes.
- Factory Default Y’ level is 70% and the pixels
with Y’ level from 65% to 75% is displayed with
zebra pattern.
- Pixels with 10% of Y’ level is displayed as black
diagonal stripes.
<Luma Zone Check OFF> <Luma Zone Check ON_Zebra Pattern Type>
<Luma Zone Check ON_Color Pattern Type>
30 Multi Format LCD Monitor
7. Other Functions
[6] Focus Assist
•
Focus Assist function assigns a color to
the pixels on the boundaries of the image
to inform the user to achieve the
best focus.
- With this function, user can easily differentiate
the focused area from out-focused area
especially when shooting with a shallow
depth of field.
- Available types are [Mono] and [Color] types.
* [Mono] : Background image is mono type.
[Color] : Background image is original color
type.
[7] Range Error
•
Pixels with Y’ or C’ levels exceeding the
designated levels of Y MAX, Y MIN, C MAX
and C MIN shall blink.
- Analyzes the input signal’s Luma(Y’) and
chroma information(C’) and if the input signal
exceeds the designated minimum value and
maximum value, the pixel shall blink. This
function is to help the user to easily find out
any unwanted levels of signals and for a
better exposure setting.
* In the case of RGB input, Range Error is not
supported.
<Focus Assist ON>
<Focus Assist ON>
<Range Error OFF>
<Range Error ON>
Multi Format LCD Monitor 31
7. Other Functions
[8] DSLR Scale
•
This function is designed for some
DSLR cameras(Canon 5D, 550D, SONY A77
and Nikon D7000) that output
different resolution from the operation
mode (preview, recording, playback).
•
Select the Camera model in the [Display/
Vide]- [DSLR Camera Sel.] menu.
•
CANON
- In StandBy mode of Canon 5D Mark II, 1080i
of HD resolution is indicated. However, the
real output resolution is 1620x1080, so a
blank area is displayed on the screen because
the 16:9 aspect ratio is not realized.
- In this case, use the DSLR SCALE function to
enlarge the 1620x1080 image and display full
screen. In Recording mode of CANON 5D
Mark II, the output resolution is SD(480p).
- Although it is SD, the real output resolution
is 640x390 not 720x480.
- DSLR SCALE function scales the 640×390
image to 1280x800(panel resolution) and
displays it full screen.
※ Note
1. When you compare the circle chart or the camera shooting chart with DSLR connected monitor(HDMI) and HDMI to SDI Conversion connected monitor, The function of Live/
Rec 16:9 mode should be selected to compare circle and it is equal to its actual ratio. If the circle is compared in Live/Rec Full mode, the output of the circle is deformed.
2. Both LVM-095W-N2 / SRM-095W-N
connected DSLR and LVM-095W-N2 / SRM-
095W-N connected HDMI to SDI Conversion
should be compared to cirlce in Zeroscan
mode. It is deformed if user selects in
Overscan and Underscan mode.
•
SONY
- In StandBy/Record mode of SONY, actual
resolution of the output signal from HDMI
terminal is 1440x1080, failing to display 16:9
aspect ratio and making marginal blank area.
Activating DSLR SCALE function will scale the
1440x1080 raster image to fill the full screen.
•
NIKON
- In StandBy/Record mode of NIKON, actual
resolution of the output signal from HDMI
terminal is 952x634, failing to display 16:9
aspect ratio and making marginal blank area.
Activating DSLR SCALE function will scale the
952x634 raster image to fill the full screen.
<DSLR Scale OFF>
<DSLR Scale ON>
32 Multi Format LCD Monitor
7. Other Functions
[9] HDMI To SDI Conversion-Out
•
Video source from ‘HDMI input’ terminal
can be output through ‘SDI throughout’
terminal.
※ Note: HDSLR camera manufacturers usually specify the resolution and frame rate for the recording. The signal format that is output through the HDMI terminal of cameras may differ from maker to maker. The signal format for HDMI output and playback function of
Canon HDSLRs is 59.94i. And even though 60i or 60p is specified in the specification of the cameras, the actual recording or HDMI output format would be 59.94i or 59.94p.
- SDI Input formats are output as below :
Input (HDMI) Output(SDI)
480 59.94i/p
576 50i/p
480i(59.94)(SMPTE-125M)
576i(50) (ITU-R BT656)
[10] Internal Pattern
•
Displays internally generated test
patterns.
- The pattern consists of ColorBar and
Pluge+Grayscale Patterns. Full screen
colors of various gray levels(0~100%) are also
embedded.
<Color Bar + Pluge Pattern>
- In HDMI Color format, RGB mode is not
available.
<Gray Pattern>
Multi Format LCD Monitor 33
7. Other Functions
[11] Firmware Upgrade
•
USB memory stick(Thumb drive) that has
F/W is necessary.
•
Select Display&Set menu
- Connect USB memory stick to USB slot in
front of the monitor.
- Set [S/W upgrade] as [On].
- If USB memory stick is connected correctly,
[S/W upgrade start] is activated.
disconnect and connect the USB memory
stick again. After 5 sec. do the same
procedure.
- The monitor searchs USB memory stick. - Select [Yes] in [S/W upgrade start] and
proceed the firmware update.
* During the update, the monitor screen is off,
and nothing functions.
* After the update, TVLogic logo shows up on
the screen, and the monitor initializes.
* Update can take 10~20min. depending on
firmware kind.
34 Multi Format LCD Monitor
8. Product Specifications
LVM-095W-N2
LCD
Input Connector
Size
Resolution
Pixel Pitch
Color Depth
Viewing Angle
Luminance of white
Contrast Ratio
Display Area
1 X HDMI
1 X BNC
9”
1920 x 1080 (16:9)
0.1035 x 0. 1035 mm
16.7M (Dithered 8bit)
H : 176 degrees / V : 176 degrees
400 cd/ m 2 (Center)
750 : 1
198.72(H) X 111.78(V) mm
HDMI Input
SDI A Channel Input
Output
Input Signal
Analog Input Spec
1 X BNC
1 X BNC
3G-SDI
HD-SDI
SD-SDI
HDMI
Analog
CVBS
SMPTE-425M-A/B
SDI B Channel Input, CVBS Channel Input (shared)
SDI Channel Output (Active Loop Through)
2.970Gbps
1.485Gbps
270Mbps
1080p (60)/1080i(60)/720p(60)/480i(60)/480p(60)/576i(50)/576p(50)
640x480/720x400/800x600/1024x768/
1280x768/1280x1024/1366x768
CVBS (SDI B Channel)
1.0Vpp (with Sync)
1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/29.97sF/25sF/24sF/23.98sF)
1080i (60/59.94/50)
1080p (30/29.97/25/24/24sF/23.98/23.98sF/ 50/59.94/60 )
SDI Input Signal
Formats
Audio In
Audio Out
Power
SMPTE-274M
SMPTE-296M
SMPTE-260M
SMPTE-125M
ITU-R BT.656
2K Format
1080i (60/59.94/50)
720p (60/59.94/50)
1035i (60/59.94)
480i (59.94)
576i (50)
2048 x 1080p (24/24sF/23.98/23.98sF)
Embedded Audio / Analog Stereo (Phone Jack)
Analog Stereo (Phone Jack), Internal speaker (Mixed Mono)
DC 12/24V (XLR-4pin (male) connector)
Power Consumption (Approx.)
Operating Temperature
24 Watts(DC)/Max 2A
0 ℃ to 45 ℃ (32 ℉ to 113 ℉)
-20 °C to 60 °C (-4 °F to 140 °F ) Storage Temperature
Main Body Dimensions (mm/inch) 223 X 175 X 60 (8.78 X 6.89 X 2.36)
Main Body Dimensions with stand (mm/inch) 260 X 194.2 X 90 (10.24 X 7.65 X 3.54)
Box Dimensions (mm/inch)
Weight
Basic Accessories
Optional Accessories
330 X 250 X 180 (12.99 X 13.78 X 7.09)
2.1kg / 4.63 lbs
DC Power adapter, AC Power Cord & Cable, Camera Mount, Handle, Stand
Acylic Protector, Rack Mountable Kit, HDMI Bracket, Sun-Hood,
Carrying Bag With Hood
* The specification above may be changed without notice.
* When using a DC Adapter other than the one supplied by the manufacturer, please be advised
that the adapter with DC 12V/3A ~ 6A can be compatible with the monitor.
Multi Format LCD Monitor 35
8. Product Specifications
SRM-095W-N
LCD
Size
Resolution
Pixel Pitch
Color Depth
Viewing Angle
Luminance of white
Contrast Ratio
Display Area
1 X HDMI
1 X BNC
9”
1920 x 1080 (16:9)
0.1035 x 0. 1035 mm
16.7M (True 8bit)
H : 176 degrees / V : 176 degrees
900 cd/ m 2 (Center)
750 : 1
198.72(H) X 111.78(V) mm
HDMI Input
SDI A Channel Input Input Connector
Output
1 X BNC
1 X BNC
3G-SDI
HD-SDI
SD-SDI
SDI B Channel Input CVBS Channel Input (shared)
SDI Channel Output (Active Loop Through)
2.970Gbps
1.485Gbps
Input Signal
HDMI
SMPTE-425M-A/B
270Mbps
1080p (23.98/24/25/30/50/59.94/60)/1080i(50/59.94/60)/720p(50/60)
480i(60)/480p(60)/576i(50)/576p(50) 640x480/720x400/800x600/1024x768/
1280x768/1280x1024/1366x768
1080p (60/59.94/50/30/29.97/25/24/23.98/30sF/29.97sF/25sF/24sF/23.98sF)
1080p (30/29.97/25/24/24sF/23.98/23.98sF/ 50/59.94/60 )
SMPTE-274M
SDI Input Signal
Formats
Audio In
Audio Out
Power
SMPTE-296M
SMPTE-260M
SMPTE-125M
ITU-R BT.656
2K Format
Power Consumption (Approx.)
Operating Temperature
Storage Temperature
1080i (60/59.94/50)
720p (60/59.94/50)
1035i (60/59.94)
480i (59.94)
576i (50)
2048 x 1080p (24/24sF/23.98/23.98sF)
Embedded Audio / Analog Stereo (Phone Jack)
Analog Stereo (Phone Jack), Internal speaker (Stereo)
DC 12/24V (XLR-4pin (male) connector)
32 Watts(DC)/Max 2.8A
0 ℃ to 40 ℃ (32 ℉ to 104 ℉)
-30 °C to 50 °C (-22 °F to 122 °F )
Main Body Dimensions (mm/inch) 223 X 175 X 60 (8.78 X 6.89 X 2.36)
Main Body Dimensions with stand (mm/inch) 260 X 194.2 X 90 (10.24 X 7.65 X 3.54)
Box Dimensions (mm/inch)
Weight
Basic Accessories
Optional Accessories
330 X 250 X 180 (12.99 X 13.78 X 7.09)
2.1kg / 4.63 lbs
DC Power adapter, AC Power Cord, Camera Mount, Handle, Stand
Acylic Protector, Rack Mountable Kit, HDMI Bracket, Camera Mount
Ball Head, Sun-Hood, Carrying Bag With Hood
* The specification above may be changed without notice.
* When using a DC Adapter other than the one supplied by the manufacturer, please be advised
that the adapter with DC 12V/3A ~ 6A can be compatible with the monitor.
36 Multi Format LCD Monitor
9. Optional Accessories
Acrylic Protector 9” Rack-Mountable Kit 9” HDMI Bracket 9”
Camera Mount Ball Head 9” Sun Hood 9” Carryng Bag with Hood
7”
9”
Multi Format LCD Monitor 37
MEMO
38 Multi Format LCD Monitor
FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv
12F, ACE HIGH-END TOWER 8, 84, Gasan digital 1-ro, Geumcheon-gu, Seoul, 08590, KOREA
TEL : +82-70-8668-6611, FAX : 82-2-6123-3201, E-mail : [email protected]
Advertisement