Ives VR910M Vandal Resistant Trim Template
Below you will find brief information for VR910M Vandal Resistant Trim. This document provides detailed instructions for preparing the door and installing the trim on mortise devices. It includes steps for transferring center lines, locating holes, and preparing both the push and pull sides of the door to ensure proper installation and functionality.
Advertisement
Advertisement
Advertisement
Key features
- Designed for use with mortise devices
- Vandal-resistant construction
- Detailed instructions for door preparation
- Includes template for accurate hole placement
Frequently asked questions
Prepare push side of door for exit device. See exit device instructions for preparation.
Prepare pull side of door for trim.
Transfer vertical and horizontal device center lines from push side of door to pull side.
Locate and prepare all holes as indicated above.