USER MANUAL - Amazon Web Services
USER MANUAL
GOLDMUND EIDOS 1080p
Projector
Goldmund Eidos 1080p Owner manual
p2
Thank you for purchasing the Goldmund Eidos 1080p projector. Please take some time to read this manual. It
will provide you with useful information.
Goldmund was founded in 1978 and has ever since been dedicated to the accurate reproduction of sound and
image. At Goldmund, we strive to lead in the creation, development and manufacture of the industry’s most
advanced technologies, including audio and video systems, home-networking and music distribution.
INTRODUCTION
GOLDMUND Eidos 1080p Projector
The Goldmund Eidos 1080p is a digital projector designed with the latest state-of-the-art technologies in
illumination, imaging, optics, electronics, thermal and industrial design in order to serve traditional as well as
novel imaging applications across a variety of markets, offering features such as:
- PROFESSIONAL GRADE POWERED PROJECTION LENSES with bayonet mounts
- DUAL LAMP SYSTEM with separate lamps for improved life, `redundancy and 24/7 operation
- DUAL OPTOMECHANICAL IRIS for variable contrast and brightness
- MECHANICAL SHUTTER for total black
- HD 1920 x 1080 pixel DLP™ technology
- SINGLE CHIP DMD™ with DarkChip™ technology by Texas Instruments®
- HIGH CONTRAST for vibrant colors and deep blacks
- HIGH RESOLUTION for unprecedented detail
- HIGH BRIGHTNESS for larger screens
- DEEP BLACKS for maximum dynamics
- REDUCED IMAGE NOISE through high end signal processing
- ECO MODE for reduced power consumption and lower audible noise
- VARIABLE LAMP POWER for alignment of multi-screen configurations
- LONG LIFE LAMP (up to 4000 hours) in low power ECO mode
- STYLISH AND COMPACT DESIGN to fit most applications, installed or movable
- MULTIPLE LENS OPTIONS for close-up front or rear projection and other applications
- DIRECT 1080p DVI-D HDCP compliant interface
- EXPANSION PORT for application specific signal processing
- LAN, RS232 and USB ports for control and monitoring
The specifications and functionality of the product may change without prior notice.
Goldmund Eidos 1080p Owner manual
p3
TABLE OF CONTENTS
1. SAFETY AND WARRANTY
2. SUPPLIED MATERIAL
3. OPTIONAL LENSES
4. OVERVIEW
5. KEYPAD
6. INDICATORS
7. REMOTE CONTROL
8. CONNECTOR PANEL
9. SET UP
10. IMAGE ADJUSTMENTS
11. LAMP OPERATION
12. CEILING MOUNT
13. USING THE PROJECTOR
14. RS 232 AND LAN CONTROL
15. TROUBLE SHOOTING
16. MAINTENANCE
17. LAMP CHANGE
18. TECHNICAL DATA
5
8
9
10
11
13
15
18
18
19
20
21
23
24
25
26
27
28
Goldmund Eidos 1080p Owner manual
p4
1. SAFETY AND WARNINGS
This user guide contains important information about safety precautions and the set-up and use of the
projector. Please read the manual carefully before you operate the projector.
SAFETY
This device complies with relevant safety regulations for data processing equipment for use in an office
environment. Before using the projector for the first time, please read the safety instructions thoroughly.
WARNING
Use only the cables and cords supplied with the projector or original replacement cables. Using other cables or
cords may lead to malfunction and permanent damage of the unit.
Always use 3-prong / grounded power cord to ensure proper grounding of the unit. Never use 2-prong power
cords, as this is dangerous and could lead to electrical shock.
Never open the unit. The projector contains no user serviceable parts. Refer all repairs to qualified personnel
only.
Make sure that no objects enter into the vents and openings of the set. Do not spill any liquids on the
projector or into the vents or openings of the unit.
Always remove lens cap before switching on the projector. If the lens cap is not removed, it may melt due to
the high-energy light emitted through the lens. Melting the lens cap may permanently damage the surface of
the projection lens.
Do not look into the projection lens when the projector is switched on. The strong light may permanently
damage sight.
Do not look into the laser beam when activated on the remote control. Laser light may permanently damage
sight. Do not point laser beam on people.
Only place the projector on a stable surface, or mount it securely using an approved ceiling mount.
Do not drop the projector.
Always operate the projector horizontally, within the range of the adjustable rear feet. Operating the unit in
other positions may reduce lamp life significantly, and may lead to overheating, resulting in malfunctioning.
Goldmund Eidos 1080p Owner manual
p5
1. SAFETY AND WARNINGS
Always allow ample airflow through the projector. Never block any of the air vents. Never cover the unit in any
way while running. Allow for sufficient distance to walls and ceilings to avoid overheating.
Minimum safety distance to any side of the unit is 50 cm / 20” in any direction.
CAUTION! Hot air is exhausted from the rear vent. Do not place objects that are sensitive to heat nearer than
50cm / 20” to the exhaust vent.
The Goldmund Eidos 1080p projector is designed for indoor use only. Never operate the unit outdoors.
Do not operate the projector outside its temperature and humidity specifications, as this may result in
overheating and malfunctioning.
Only connect the projector to signal sources and voltages as described in the technical specification.
Connecting to unspecified signal sources or voltages may lead to malfunction and permanent damage of the
unit.
Allow the unit to cool down for 60 minutes before lamp change.
INFORMATION AND WARNING ABOUT POTENTIAL HEALTH ISSUES RELATED TO MERCURY
VAPOR.
The Goldmund Eidos 1080p uses a very powerful UHP™ lamp for illumination to produce an extremely bright
image.
This technology is similar to other high-pressure discharge lamps that are extensively used in cars, street
lights and other lighting appliances today. These lamps, like fluorescent lighting, contain small amounts of
mercury. The amount of mercury present in a lamp is far below the limits of danger set by the authorities.
It is very important that lamps containing mercury are treated properly to minimize potential health hazards.
The UHP™ lamp, like any other high brightness projector lamp, is under high-pressure when operating. While
the lamp and the projector are carefully designed to minimize the probability of lamp rupture, the lamp may
break while operating and small amounts of mercury vapor may be emitted from the projector. The probability
of rupture increases when the lamp reaches its nominal life. It is therefore highly recommended that the lamp
is replaced when the rated lifetime is reached.
As a general precaution, secure good ventilation in the room when operating the projector. If lamp rupture
occurs, evacuate the room and secure good ventilation. Children and pregnant women in particular should
leave the room.
Goldmund Eidos 1080p Owner manual
p6
1. SAFETY AND WARNINGS
When replacing a worn lamp, dispose of the used lamp carefully by proper recycling.
Mercury is a naturally occurring, stable metallic element that may pose a safety risk to people under certain
conditions. According to the Public Health Statement for Mercury published by the Agency for Toxic
Substances and Disease Registry (“ATSDR”, part of the United States Public Health Service), the brain, central
nervous system and kidneys are sensitive to the effects of mercury, and permanent damage can occur at
sufficiently high levels of exposure. Acute exposure to high concentrations of mercury vapor can cause
conditions such as lung and airway irritation, tightness in the chest, a burning sensation in the lungs,
coughing, nausea, vomiting and diarrhea. Children and fetuses are particularly sensitive to the harmful effects
of metallic mercury to the nervous system.
Seek medical attention if any of the above symptoms are experienced or if other unusual conditions are
experienced following lamp rupture.
WARNING
This product contains chemicals, including lead, known to the State of California to cause birth defects or
other reproductive harm. Recycle properly, do not dispose of in ordinary waste!”
REMOTE CONTROL WARNING
Laser radiation class II product; wavelength 670nm; maximum output 1mW.
Remote control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.
Remote control complies with applicable requirements of EN 60 825-1: 1994 + A11
Goldmund Eidos 1080p Owner manual
p7
2. SUPPLIED MATERIAL
Eidos 1080p without lens
Lens supplied separately
Remote control with batteries
User guide
Power Cord
(country dependent)
Ceiling mount cover
Before Set up and Use
Unpack the supplied parts and familiarize yourself with the various components.
Goldmund Eidos 1080p Owner manual
p8
3. OPTIONAL LENSES
A range of fixed and zoom lenses is available to cover most applications, both front and rear. The lenses are
powered and fitted with a bayonet mount for ease of installation.
Switch off all equipment before setting-up for proper function.
When mounting and changing lenses, be aware that the optical system is exposed to dust and foreign
particles as long as the lens is not attached to the system. Do not leave the lens mount open longer than
necessary to change lens. If a lens is not mounted, always insert the protection lid to avoid dust and foreign
particles entering the internal optics.
Never run the projector without lens mounted.
A_ Remove the protection lid from the bayonet mount by turning the knob anti-clockwise.
B_ Remove the rear lens cap.
C_ Attach the projection lens using the bayonet mount, observing the red insertion marks.
D_ Turn the lens firmly clockwise until it stops with a click.
E_ Remove the lens cap from the projection lens. If you switch the projector on with the lens cap in place, the
lens cap may melt, damaging not only the lens cap, but also the projection lens and surrounding parts.
F_ To change lens, first remove the current lens by pushing the release button and twisting the lens counterclockwise until it comes loose.
- Pull the lens out.
- Insert the new lens as described above.
OPTIONAL LENSES
Goldmund Eidos 1080p Owner manual
p9
4.OVERVIEW
A. Lens
B. IR sensor
C. Ventilation
D. Lens release
E. Power connector
F. Keypad
G. Connector panel
H. LCD
I. Lamp lids
J. Adjustable feet
K. Security lock
L. Ceiling mount
Goldmund Eidos 1080p Owner manual
p10
5. KEYPAD
The keypad is illuminated for operation in dark environments. Available functions are illuminated in yellow
while selected (active) functions are illuminated in green. Functions that are not available are not illuminated.
In addition to the various functions, 10 keys are numbered 0-9. These keys are used for PIN code and other
numeric functions as applicable.
POWER
Switches the projector between on and standby modes. Press firmly (1 sec) to switch on. Press firmly (1 sec)
twice to switch off.
ARROW KEYS
Use the arrow keys to control lens and LCD functions.
LCD
Enable the backlight in the LCD.
TEST
Applies test images for set up and adjustment.
RESET
Press and hold for 2 seconds to reset settings to factory default.
ZOOM
Select ZOOM, then use arrow keys to zoom in or out.
FOCUS
Select FOCUS, then arrow keys to focus the image
SHIFT
Select SHIFT, then the arrow keys to shift the image up, down or sideways.
IRIS
Select IRIS, then arrow keys to adjust to desired combination of brightness and contrast.
SHUTTER
Press SHUTTER to stop the projected image completely.
Goldmund Eidos 1080p Owner manual
p11
5. KEYPAD
TEMP
Controls the color temperature of the displayed image. Use arrow keys to change.
GAMMA
Push GAMMA, then arrow keys to select between gamma tables.
D65/UNCORR
Toggle between D65 and uncorrected color temperature.
ORIENT
Press ORIENT, then arrow keys to cycle between desktop, ceiling, front and rear combinations.
COLOR
Press COLOR then arrow keys to adjust color boost.
CONTRAST
Press CONTRAST, then arrow keys to adjust image contrast electronically (not optical iris).
BRIGHT
Press BRIGHT, then arrow keys to adjust image brightness electronically (not lamp intensity).
LAMP 1
Press key 2 seconds to switch lamp 1 on or off. Observe wait time required after switching off before
switching on again. If lamp 2 is off, pressing this key will switch lamp 1 off and lamp 2 on.
LAMP 2
Press key 2 seconds to switch lamp 2 on or off. Observe wait time required after switching off before
switching on again. If lamp 1 is off, pressing this key will switch lamp 2 off and lamp 1 on.
Goldmund Eidos 1080p Owner manual
p12
6. INDICATORS
STATUS
Indicates the overall system status by green, yellow and red colors.
PERMANENT GREEN LIGHT
The projector is turned on and in normal operation.
PERMANENT YELLOW LIGHT
The unit is in standby mode; no source(s) connected, or the source(s) connected are inactive or switched off,
thereby activating the power-save function (DPMS). You may enable or disable the power save function in the
SET UP sub menu, DPMS on or off.
FLASHING YELLOW LIGHT
Please wait. The yellow light will flash a period after power cord is connected (10-15 sec.), and a period after
going to standby mode while lamp is cooling down (approximately 45 sec.). The projector may not be turned
on again until the light has turned to permanent yellow.
FLASHING RED LIGHT
Projector is overheated. Turn off immediately! Check if air inlets are covered or if ambient temperature is
outside specifications. The projector cannot be restarted unless the power cord is disconnected and
reconnected again.
If the projector continues to flash red, you will need to return the unit for service.
LAMP 1, LAMP 2
Indicate the status of each lamp by green and red colors.
PERMANENT GREEN LIGHT
The lamp is on and in normal operation.
PERMANENT YELLOW
The lamp is ready and in standby mode
FLASHING YELLOW
Please wait. Lamp is cooling down.
Goldmund Eidos 1080p Owner manual
p13
6. INDICATORS
PERMANENT RED LIGHT
Lamp life has expired or lamp is not igniting or lamp door is open. Please change projection lamp immediately.
Failing to change lamp may lead to lamp explosion.
NO LIGHT
No lamp inserted / connected
LCD
The projector is fitted with a backlit LCD screen that reports system status.
You can navigate the LCD screen by using the arrow keys on the keypad.
Goldmund Eidos 1080p Owner manual
p14
7. REMOTE CONTROLE
The remote control allows direct control of projector settings. The remote control is backlit for use in dark
environments. It also has a data jack that allows for wired connection to the projector.
When the wire is connected, the IR (infra-red) beam and internal batteries are switched off.
POWER
Switches the projector between on and standby modes.
TEST
Applies test images for set up and adjustment.
RESET
Press and hold for 2 seconds to reset settings to factory default.
BACKLIGHT
Switches the backlight on and off. The backlight will switch off automatically after ten seconds.
LAMP DUAL
Press key 2 seconds to switch both lamps on.
LAMP 1
Press key 2 seconds to switch lamp 1 on or off. Observe wait time required after switching off before
switching on again. If lamp 2 is off, pressing this key will switch lamp 1 off and lamp 2 on.
LAMP 2
Press key 2 seconds to switch lamp 2 on or off. Observe wait time required after switching off before
switching on again. If lamp 1 is off, pressing this key will switch lamp 2 off and lamp 1 on.
CON
Press CON up or down to adjust image contrast electronically (not optical iris).
BRIGHT
Press BRIGHT up or down to adjust image brightness electronically (not lamp intensity).
COLOR
Press COLOR up or down to adjust color boost.
Goldmund Eidos 1080p Owner manual
p15
7. REMOTE CONTROLE
COLOR TEMP
Press UNCORR for uncorrected color temperature
TEMP
Press TEMP up or down to control the color temperature of the displayed image.
D65
Press D65 to correct color temperature
SHUTTER
Toggles the mechanical shutter on and off.
ORIENT
Press ORIENT left or right to cycle between desktop, ceiling, front and rear combinations.
ZOOM
Press the ZOOM keys to zoom the image in and out.
FOCUS
Press the FOCUS keys to focus the image.
SHIFT
Press SHIFT, then the arrow keys to shift the image up, down or sideways.
IRIS
Press the IRIS keys to adjust the optomechanical stop to the desired combination of brightness and contrast.
ASPECT
Cycles through the aspect ratios available with the current source.
ARROW KEYS
Use the arrow keys for various adjustments.
LASER
Activates the built-in laser pointer. CAUTION! Do not point laser beam at people. Do not stare into laser beam.
Goldmund Eidos 1080p Owner manual
p16
7. REMOTE CONTROLE
LCD
Press LCD to activate the LCD screen on the projector.
GAMMA
Press GM+ or GM- to select between gamma settings.
STORE
Press STORE, then one digit 0-9, to store user setting in memory.
RECALL
Press RECALL, then one digit 0-9, to recall user setting from memory.
0-9
Used for memory store and retrieval.
Goldmund Eidos 1080p Owner manual
p17
8. CONNECTOR PANEL
The connector panel may be illuminated by pushing the LIGHT key on the keypad.
A_ DVI-D - Digital RGB: For a low noise computer and video image.
B_ RS 232 control in-out: Allows for wired remote control and monitoring of many projector functions used in
installation environments. The secondary output connector allows for daisy-chaining, enabling both individual
and global control and monitoring of multiple projectors.
C_ RC: Allows connection of external IR receiver or wired remote control.
Triggers: 12VDC for Screen Drop and Aspect Ratio control
D_ USB - interface: Allows for software upgrade.
E_ LAN: Provides access to control and monitoring over a Local Area Network
F_ Mains power connector: Use only three-prong / grounded power cord.
G_ X-PORT 1, 2: Custom interfaces used for application-specific signal processing. Use only approved
interfaces that conform to the X-PORT specification.
9. SET UP
Before setting-up, switch off all equipment. The projector may be connected a 1080p 50-60Hz image source
only using DVI-D (Digital Visual Interface).
Connect the RS232 or the LAN interface for control. Connect the powercord.
Goldmund Eidos 1080p Owner manual
p18
10. IMAGE ADJUSTMENTS
Various optical adjustments are available, depending on your choice of lens. All lens adjustments are
motorized and controlled by the keypad, remote control or by RS232 or LAN.
Two kinds of lenses are available; fixed or zoom. A fixed lens has permanent focal length, or throw ratio. A
zoom lens has variable focal length or throw ratio.
In addition, fixed lenses may or may not be shiftable, depending on type and model. See the specifications for
the particular lens.
The throw ratio is defined as the ratio between the projection distance to the screen and the projected image
width. With a fixed lens, this ratio is set. With a zoom lens, this ratio can be changed within certain limits
specific to the lens in use.
On the keypad, first select lens function, then use the cursor keys to adjust. On the remote control, zoom and
focus are direct keys, while lens shift is operated by first selecting SHIFT, then use the arrow keys.
A mechanical SHUTTER is employed that totally shuts off the optical image path. The shutter is directly
available from the keypad and the remote control. The shutter is also in place when there is no lens attached.
Select a lens suitable for the application. A range of lenses from very wide to super telezoom is available.
Adjust the horizontal and vertical SHIFT, if applicable, in order to align the image on screen.
If a zoom lens is used, adjust the image to the right size. If a fixed lens is used, relocate the unit to achieve
the right image size.
FOCUS the image properly.
Adjust the IRIS to achieve the desired optical balance between brightness and contrast. In a bright
environment, brightness is usually maximized resulting in reduced contrast. In a dark environment, less light is
needed and desired, while high contrast and deep blacks are appreciated.
To level the image, adjust the feet as needed by turning the feet accordingly.
Goldmund Eidos 1080p Owner manual
p19
11. LAMP OPERATION
The projector is fitted with two individual projection lamps that can be run in various modes. In addition,
lamps can be replaced as needed separately. This ensures an optimized cost of ownership. Individual lamp
timers are maintained for each lamp.
Lamp operation mode is controlled in the LAMPS sub menu.
Goldmund Eidos 1080p Owner manual
p20
12. CEILING MOUNT
The projector can be ceiling mounted using an approved UL tested/ listed ceiling mount fixture, with a
capacity of minimum 60 kg / 130 lbs.
For ceiling mount, use M6 screws that penetrate maximum 15 mm / 0.6” into the projector body.
For proper ventilation the minimum distance from ceiling/ rear wall should be: 30/ 50 cm, 12/ 20 inch.
Goldmund Eidos 1080p Owner manual
p21
12. CEILING MOUNT
CEILING MOUNT COVER
The auxiliary cable cover can be mounted on the projector to conceal the interface cables and power cord
when the unit is ceiling mounted.
Connect all cables and fix them in place before the cable cover is attached to the projector.
A_ Attach the cable cover to the projector by inserting the horizontal hooks on the cover in the horizontal
slots on the rear of the projector.
B_ Turn the cover untill the vertical hooks on the cover are inserted into the vertical slots on the rear of the
projector.
C_ The cover will snap in place, to release pull the vertical hooks on the cover out of the slots, letting the
cover hinge on the horizontal hooks.
Goldmund Eidos 1080p Owner manual
p22
13. USING THE PROJECTOR
After setting-up, switch on all equipment.
The projector can be controlled by the keypad on the rear, by the remote control or using the RS232 or LAN
interfaces.
To switch the projector on, firmly press the POWER button on the keypad or the remote control. The STATUS
indicator will turn from yellow to green when the unit is switched on. The keypad will light up so that all
available functions are yellow. Functions not available will have no light. Selected functions will turn green.
If the STATUS indicator is flashing yellow, please wait until it turns permanent yellow.
To switch the projector off, firmly press the POWER button on the keypad or the remote control twice (to
confirm that you really want to switch off the unit). The STATUS indicator will turn from green to flashing
yellow, then yellow when switched off.
You may not switch the unit on while the STATUS indicator is flashing yellow. Please wait until the indicator is
permanent yellow.
Goldmund Eidos 1080p Owner manual
p23
14. RS 232 AND LAN CONTROL
RS 232
You may control and monitor the projector remotely through the serial RS232 control interface.
Two RS232 protocols are employed. A simple instruction set (SIS) ASCII protocol gives access to the most
frequently used commands. In addition, a binary protocol is available where each command is a series of 32
bytes in one packet. The protocols allow for both SET and GET operations. To utilize GET operations the host
needs a routine for receiving and interpreting incoming packets. SET-operations are used to force the
projector into different modes, like setting brightness and contrast, switching between sources, etc.
A separate document “RS-232 and LAN communication protocol and command set” is available that describes
the communications parameters and operational codes in detail.
LAN
The projector can be controlled and monitored through the LAN connector as an alternative to RS232.
LAN control is available either through an embedded web page for the most frequently used commands or
using the same command set as for RS232 for full access to all system controls.
NOTE! THE PROJECTOR IS CONFIGURED WITH A DEFAULT IP ADDRESS. SEE THE SYSTEM INFORMATION
AVAILABLE THROUGH THE MENU SYSTEM OR REMOTE CONTROL FOR THE ACTUAL IP-ADDRESS.
Detailed descriptions of configuration use and command set is described in a separate document “RS-232 and
LAN communication protocol and command set”.
You may consider using the LAN interface as a means of theft-detection. When the projector is removed, the
LAN will be disconnected; this may be detected over the local area network and could be used to trigger an
alarm.
Goldmund Eidos 1080p Owner manual
p24
15. TROUBLE SHOOTING
NO IMAGE
No connection: Check if all connections are properly made.
Source off: Check if the equipment is powered on.
Lamp dead: The lamp may need replacement. Check the LAMP TIME in the UTILITIES sub menu.
Source hibernated: Engage the source to display and activate image.
Notebook external screen: Different notebook PC’s use different combinations of keystrokes to enable the
external graphics port.
No lens: Check if lens is attached properly.
Shutter engaged: Check if the shutter is engaged.
Lens cap: check if the lens cap is off!
DARK IMAGE
Old, worn lamp: The lamp may need replacement. Check the LAMP TIME in the LCD.
Low BRIGHTNESS and CONTRAST settings: Press AUTO or use the menu system, PICTURE sub menu for
CONTRAST and BRIGHTNESS adjustment.
FLICKERING IMAGE
Bad lamp: Replace the lamp. Check the LAMP TIME in the LCD.
UNSHARP IMAGE
Keystone correction may have been activated inadvertently, compressing parts of the image that affect the
display of fine-line graphics, text and other images of high resolution.
Source resolution is different from projectors native resolution:
The projector will automatically scale and resize the input format to its native resolution.
Use a different scaling factor in the PICTURE sub menu, ASPECT. You may also adjust the SHARPNESS.
Goldmund Eidos 1080p Owner manual
p25
16. MAINTENANCE
The Goldmund Eidos 1080p may from time to time need cleaning. Never open the unit, as this will void any
warranties. Refer service and repair to qualified personnel only.
The projector is using lamps that have a limited life time. Please refer to the LAMP CHANGE section below for
further details.
Only the exterior of the unit may be cleaned. Use a damp cloth. Make sure no liquids enter the inside of the
projector Vacuum clean all the air vents (A) regularly to maintain sufficient air flow.
The projection lens (B) is sensitive to scratches. Use lens cleaning tissue, available at all photographic stores
when cleaning the projection lens. Use lens cap when not in use.
HEAVY DUTY AND CONTINOUS USE
The projector contains moving parts (such as cooling fans) that have limited life expectancies.
When the projector has been used for 7 500 hours, and when the unit is used in mission-critical applications,
it is recommended that the projector is given preventive maintenance by a qualified service person. This will
help ensure long-term stable operation.
Goldmund Eidos 1080p Owner manual
p26
17. LAMP CHANGE
The LAMP indicators on the keypad will turn red when lamp life expires.
Change the lamp when lifetime expires. Always replace lamp with the same type and rating.
The lamp includes an electronic lamp timer that is tracking the life time of the lamp.
Allow lamp to cool down before changing. One lamp may be changed while the other lamp is operating (hotswap).
A_ Release the screw (LAMP 1) or (LAMP 2) depending on which lamp that needs to be replaced.
B_ Open the lamp lid(s).
C_ Turn the three locking screws a quarter turn anti-clockwise.
D_ Pull the lamp out.
Replace with a new lamp in reverse order.
E_ Insert a new lamp. Observe the guide pins.
F_ Turn the tree locking screws a quarter turn clockwise.
H_ Close the lamp lid.
I_ Turn the locking screw clockwise.
WARNING
Be careful not to touch the protective glass when replacing the lamp house, this may cause the protective
glass to overheat and break while in use.
WARNING
Be extremely careful when removing the lamp module. In the unlikely event that the bulb ruptures, small
glass fragments may be generated.
The lamp module is designed to contain these fragments, but use caution when removing the lamp module.
Goldmund Eidos 1080p Owner manual
p27
18. TECHNICAL DATA
PROJECTOR UNIT
Resolution
1920 x 1080, 16:9 aspect ratio
Display technology
Single chip DLP™ technology by Texas Instruments®
DMD™ with DarkChip™ technology
Compatibility
1080p
Brightness
HD 1080
2500 ANSI lumen (typ),
2000 ANSI lumen (typ),
3500 ANSI lumen (typ),
2800 ANSI lumen (typ),
*) Initial brightness.
Contrast
7500 : 1 B/W (max) at max IRIS, 1000 : 1 B/W (min) at min IRIS
Lamp
2x250W UHP™ dimmable to 2x200W
2x300W UHP™ dimmable to 2x240W
Lamp Life
2000
4000
1700
2200
Sound Pressure Level
Lp = 36 dB(A)/20mPa (typ), 45 dB(A)/20mPa (max) @ 20°C/68°F, sea level
Dimensions
400 x 500 x 200 mm / 15.7” x 19.7” x 7.9”, excluding lens
Weight
12.6 kg / 27.8 lbs, excluding lens
hrs
hrs
hrs
hrs
(typ)
(typ)
(typ)
(typ)
to
to
to
to
50%
50%
50%
50%
2000
1600
2800
2200
ANSI
ANSI
ANSI
ANSI
brightness
brightness
brightness
brightness
lumen
lumen
lumen
lumen
@
@
@
@
(min)
(min)
(min)
(min)
250W
200W
300W
240W
@
@
@
@
(250W
(250W
(300W
(300W
2x250W lamp power*)
ECO-mode 2x200W lamp power*)
2x300W lamp power*)
ECO-mode 2x240W lamp power*)
lamp)
lamp)
lamp)
lamp)
Goldmund Eidos 1080p Owner manual
p28
Inputs
1
1
1
1
1
DVI-D female digital RGB
RS 232 9 pin female DSUB (control, firmware update)
USB-B female (control, firmware update)
LAN RJ-45 female (control, firmware update)
Remote Control 3.5 mm female stereo jack
Outputs
2 Trigger 3.5 mm female stereo jack, 12 V @ 80 mA Max
1 RS 232 9 pin male DSUB
Power
90-260 VAC, 50-60 Hz, 840W @ 2x250W
940W @ 2x300W
Energy dissipation
2866BTU/h @ 2x250W
3200BTU/h @ 2x300W
MTBF
17500 hrs
Conformance
CE, FCC A, CSA(C,US)
Temperature operating 0-40°C / 32-104°F, 0-1500 m / 0-4950 ft
0-35°C / 32-95°F, 1500-3000 m / 4950-9900 ft
Temperature storage
-20 - 60°C / -4 - 140°F
Humidity operating
20-90% RH, non-condensing
Humidity storage
10-95% RH, non-condensing
LENSES
Short fixed lens
f = 16.3 mm
F = 2.1 - 6.5
Throw ratio (distance: width) = 0.79 : 1
Throw distance = 0.5 - 2.5 m / 1.65 - 8,25 ft.
Horizontal shift = +/- 1% (fine adjust only)
Vertical shift = +/- 1% (fine adjust only)
Goldmund Eidos 1080p Owner manual
p29
Medium fixed lens
f = 23.95 mm
F = 2.1 - 6.5
Throw ratio (distance: width) = 1.15 : 1
Throw distance =1 - 15 m / 3.3 -50 ft.
Horizontal shift = +/- 90%
Vertical shift = +/- 105%
Wide angle zoom lens
f = 25.6 - 33.2 mm
F = 2.1 - 6.5
Zoom ratio = 1.3 x
Throw ratio (distance: width) = 1.23- 1.60 : 1
Throw distance =1 - 15 m / 3.3 - 50 ft.
Horizontal shift = +/- 90%
Vertical shift = +/- 105%
Standard zoom lens
f = 33.2 - 48.1 mm
F = 2.1 - 6.5
Zoom ratio = 1.5 x
Throw ratio (distance: width) = 1.60 : 1 - 2.32 : 1
Throw distance = 2 - 15 m / 6.6 - 50 ft.
Horizontal shift = +/- 90%
Vertical shift = +/- 105%
Long zoom lens
f = 48.9 - 78.4 mm
F = 2.1 - 6.5
Zoom ratio = 1.6 x
Throw ratio (distance: width) = 2.36 - 3.78 : 1
Throw distance = 2 - 30 m / 6.6 - 100 ft.
Horizontal shift = +/- 90%
Vertical shift = +/- 105%
Very long zoom lens
f = 78.3 - 136.2 mm
F = 2.1 - 6.5
Zoom ratio = 1.75 x
Throw ratio (distance: width) = 3.78 - 6.57 : 1
Throw distance = 4 - 40 m / 13.2 - 132 ft.
Horizontal shift = +/- 90%
Vertical shift = +/- 105%
Specifications subject to change without prior notice. All values may varyup to +/- 20%.
Goldmund Eidos 1080p Owner manual
p30
Goldmund Eidos 1080p Owner manual
p31
Goldmund Eidos 1080p Owner manual
p32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement