Snap-on HD35L Series - Flo
Snap-on® HD35L SERIES™
Table of Contents
TABLE OF CONTENTS
INTRODUCTION to the HD35L SERIES ..................................... 2
I. SAFETY INFORMATION ......................................................... 3
- Section 1.01: Important Safety Notice....................................... 3
- Section 1.02: Important Safety Instructions............................... 5
II. SYSTEM FEATURES & SPECIFICATIONS ........................... 9
- Section 2.01: Features............................................................... 9
- Section 2.02: Dimensions & Technical Specifications............... 10
- Section 2.03: Machine Overview............................................... 11
III. OPERATING PROCEDURES ...............................................12
- Section 3.01:
- Section 3.02:
- Section 3.03:
- Section 3.04:
- Section 3.05:
Suggested Additional Tools................................. 12
First Time Operation & Technical Support........... 13
FX-HD35L Operating Instructions........................ 14
MFX-HD35L Operating Instructions..................... 17
FXD-HD35L Operating Instructions..................... 21
IV. HOSES & ADAPTERS ......................................................... 25
- Section 4.01: Adapter Hoses..................................................... 25
- Section 4.02: Adapters............................................................... 29
V. TROUBLESHOOTING & MAINTENANCE ........................... 30
VI. ORDERING REPLACEMENT PARTS ................................. 31
LIMITED WARRANTY ................................................................ 35
Operations Manual
Printed in the U.S.A. for Snap-on ®
1
Snap-on® HD35L SERIES™
Introduction
INTRODUCTION
to the EETF303B, EETF304B & EETF306A
Congratulations on the purchase of your Snap-on HD35L fluid exchanging machine!
Simply put, this machine is the cleanest, safest, easiest, fastest, most thorough, and most costefficient method of fluid exchange ever devised. Suddenly, regular automatic transmission and
power steering maintenance become a more realistic proposition. Transmission and power
steering fluid exchanging are cleaner and neater than ever!
Transmission Fluid Exchange:
To attain the highest level of protection for internal transmission components and increase the
transmission’s life span to the maximum, it is recommended that the transmission’s lubrication
system is serviced every 15,000 miles (or according to the vehicle owner’s manual). The Snap-on
HD35L SERIES exchanges virtually all of the used transmission fluid to new, without even
requiring the transmission pan to be dropped. There is no spillage, and no mess.
Power Steering Fluid Exchange (EETF304B Only):
Service neglect leads to power steering system complaints including poor handling, hard or
sluggish steering, and objectionable noise. Historically, power steering system fluid service has
been neglected, often due to the lack of a convenient method for providing such flush or fluid
exchange services. Previous methods for flushing the power steering system or replacing the
power steering fluid were time consuming and often inefficient or incomplete. Now, it’s easier than
ever to replace up to 95% of the old power steering fluid in less than 8 minutes, to ensure your
power steering system has a long, trouble-free life.
• The HD35L can be used practically anywhere – and with almost any vehicle.
• It is compact, mobile, and self-contained.
• It operates off the 12-volt battery of the vehicle being serviced.
• It does not require a pit, lift, or ramp.
• The HD35L hooks up directly to one of the vehicle’s transmission cooler lines for a
transmission fluid exchange.
• The ATF fluid exchange, from setup to finish, typically takes 15 minutes or less!
No wonder an ATF exchange is the most requested method of preventative automatic
transmission maintenance today. Now there’s the option of a power steering fluid exchange as
well… Both in one machine!
Please take time to read through this manual to familiarize yourself with the HD35L before
performing your first ATF or PSX exchange.
2
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
I. Safety Information
I. SAFETY INFORMATION
1.01 IMPORTANT SAFETY NOTICE
For your safety, read this manual thoroughly before operating your HD35L unit.
Your HD35L unit is intended for use by properly trained, skilled professional automotive
technicians. The safety messages presented below and throughout this user’s manual are
reminders to the operator to exercise care when using this unit. Before using your HD35L
unit, always refer to and follow the safety messages and applicable service procedures
provided by the manufacturer of the vehicle being serviced.
• Read All Safety Instructions
Read, understand and follow all safety messages and instructions in this manual. Safety
messages in this section of the manual contain a signal word with a three-part message
and, in some instances, an icon.
• Signal Words
The signal word indicates the level of the hazard in a situation:
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided,
may result in moderate or minor injury to the operator or to bystanders.
Indicates a situation which, if not avoided, may result in damage
to the HD35L or the vehicle being serviced.
• Safety Messages
Safety messages in this section contain three different type styles:
• Normal type states the hazard.
• Bold type states how to avoid the hazard.
• Italic type states the possible consequences of not avoiding the hazard.
Operations Manual
Printed in the U.S.A. for Snap-on ®
3
I. Safety Information
Snap-on® HD35L SERIES™
• Safety Symbols
A safety symbol, when present, gives a graphical description of the potential hazard, and
how to avoid the hazard:
Risk of Fire
Read Instructions Before Use
Risk of Explosion
Mandatory Eye Protection
Risk of Entanglement
Mandatory Protective Gloves
Dangerous Fumes
Mandatory Protective Clothing
Do Not Pull or Move
4
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
I. Safety Information
1.02 IMPORTANT SAFETY INSTRUCTIONS
Engine exhaust contains toxic gases.
• Vent vehicle’s exhaust away from work area.
• Do not breathe exhaust.
Exhaust gases will cause injury or death.
Improper use and operation.
• Read, understand and follow all safety messages and operational procedures in this
manual before operating the Snap-on HD35L.
• This equipment should be operated only by qualified personnel.
• Use this equipment only as described in this manual.
Improper use and operation of this product can result in injury.
Engine systems can malfunction expelling fuel, oil vapors, hot steam, hot toxic exhaust gases and
other debris.
• Wear safety goggles and protective clothing, user and bystander.
Engine systems that fail can cause serious injury.
Risk of expelling pressurized fluids.
• Wear safety goggles and protective clothing, user and bystander.
• Verify that engine and machine are off before connecting or disconnecting cooler lines
and adapter hoses.
• Always unplug the machine from its power source when not in use.
• Keep the service hoses away from hot or moving engine parts. Hoses can split or burst
causing fluid to be expelled.
• Tighten all connections properly. Insufficient or excessive torque can result in fluid
leakage.
• Avoid contact with automatic transmission or power steering fluid.
• Treatment methods are as follows:
Eyes: Flush eyes with plenty of water.
Skin: Wash with soap and water.
Operations Manual
Printed in the U.S.A. for Snap-on ®
5
I. Safety Information
Snap-on® HD35L SERIES™
Inhalation: Move to uncontaminated area.
Ingestion: If large amount, get medical attention.
If any irritation persists, get medical attention.
• Dispose of used fluid according to environmental laws and regulations.
Although automatic transmission and power steering fluid pose no significant health hazards,
some individuals may experience adverse reactions upon contact. Pressurized fluid can cause
serious injury.
Risk of unexpected vehicle movement.
• Block drive wheels before starting vehicle’s engine to begin an exchange.
• Unless instructed otherwise, set parking brake and put gear selector in park.
• Do not leave a running vehicle unattended.
A moving vehicle can cause injury.
Engine has moving parts. Risk of entanglement.
• Do not place tools on fenders or other places in engine compartment.
• Keep yourself, clothing, battery cables and service hoses clear of moving parts such as
fan blades, belts and pulleys.
Contact with moving parts can cause injury.
Risk of fire or explosion.
• Do not operate the HD35L in the vicinity of open containers of flammable liquids such as
gasoline.
• Keep hoses and jumper cables away from heat sources and sharp edges.
• Do not operate equipment with damaged cords or hoses until they have been examined
by a qualified serviceman.
Fire or explosion can cause injury.
Risk of fire or explosion. Gases produced by a battery are highly explosive.
• Wear safety goggles and protective clothing, user and bystander.
• This machine is equipped to operate on 12-volt DC power only. A power source greater
than this can result in serious injury to the user as well as damage to the machine.
• Do not smoke, place metal tools on battery or allow a spark or flame in vicinity of battery.
• Clean battery terminals before hooking the machine’s battery clips to them. During
cleaning, keep airborne corrosion from eyes, nose and mouth.
6
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
I. Safety Information
• Be sure both battery cables are tightly connected to the battery terminals as instructed
before proceeding with a fluid exchange.
• Never remove battery cables from the battery terminals while the machine is operating.
Only use the “EMERGENCY STOP” button located on the control panel to stop an
exchange.
Battery explosion can cause injury.
Battery acid is a highly corrosive sulfuric acid.
• Wear safety goggles and protective gloves, user and bystander.
• Have plenty of fresh water and soap nearby. If battery acid contacts skin, clothing, or
eyes, flush exposed area with soap and water for 10 minutes.
• While cleaning battery’s terminals, keep airborne corrosion from eyes, nose and mouth.
• Do not touch eyes while working near battery.
Battery acid can burn eyes and skin.
Risk of burns.
• Wear gloves when working near hot engine components.
• Do not touch hot exhaust systems, manifolds, engines, radiators, etc.
• The automatic transmission fluid coming from the vehicle along with some of the
machine’s components that the fluid comes into direct contact with (i.e. external: hoses
and quick-disconnect fittings; internal: hoses and all fittings) may reach temperatures
uncomfortable to the touch. Exercise caution in avoiding contact with these items.
Hot components can cause injury or discomfort.
Ratchet mechanisms and tools may slip or break if dirty. Mismatched or partially worn parts can
cause ratchet or any tool to slip or break.
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
• Do not replace worn parts individually. If adapter hose fittings become worn, see
“Ordering Replacement Parts” to order new hoses.
• The use of any other accessories not specified in this manual may create a hazard.
Tools that slip or break can cause injury.
Operations Manual
Printed in the U.S.A. for Snap-on ®
7
Snap-on® HD35L SERIES™
I. Safety Information
Risk of injury.
• This equipment should be operated by qualified personnel only.
• Use this equipment only as described in this manual.
• Always unplug the machine from its power source when not in use.
• Loop the power cord loosely in its proper location when machine is not in use.
• Do not operate equipment with a damaged battery cables or hoses, or if the equipment
has been dropped or damaged, until it has been examined by a qualified service
representative.
• Care should be taken to arrange the battery cables and service hoses so that they will
not be tripped over or pulled.
• Never pull on the power cables or service hoses to transport the HD35L. Damage may
occur to these components, or machine may tip over.
• Keep area of operation clear of unnecessary tools and equipment. Utilize recessed tool
storage areas on the top of the machine.
• Never leave the machine running unattended.
• The HD35L is not designed for any other purpose than the exchanging of automatic
transmission and power steering fluid.
Operation of your HD35L unit by anyone other than qualified personnel may result in injury.
Risk of equipment damage.
• Flushing high mileage cars that have not been previously serviced can cause operating
problems in the transmission.
• Connect battery cables to a 12-volt power source only (i.e. vehicle’s battery).
• Servicing, transporting, or storing this machine in an attitude other than the normal
operating position can result in fluid spillage and/or component damage.
• Use only the manufacturer’s recommended attachments.
• The Snap-on HD35L is fully automatic. Refer to your control panel at all times.
• Never pull on the power cables or service hoses to transport the HD35L. Damage may
occur to these components, or machine may tip over.
• Periodically clean the machine by wiping down with a clean, soft, dry cloth.
Improper operation of equipment may result in damage to machine or components.
SAVE AND FOLLOW THESE INSTRUCTIONS!
8
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
II. System Features & Specifications
II. SYSTEM FEATURES & SPECIFICATIONS
2.01 FEATURES
Mechanical Features
• Accurate sensor technology allows optimum fluid level to be maintained in
vehicle’s transmission.
• Two in-line 22-micron absolute fluid filters capture microscopic particles and
contaminants.
• Numbered quick-disconnect hoses with adapters save time in identifying the proper
hoses for the application
• Easy to use adapters allow quick hookup to virtually any automobile make and model,
saving time and money.
• Clear service hoses give visual confirmation of new and used fluid movements.
• Ergonomically correct working height means greater productivity, less stress and strain.
• Durable roto-cast polyethylene body and tanks prevent vehicle damage. The unit is also
lightweight and durable, for easier handling and longer life.
• Large 5-inch locking caster wheels make machine easy to maneuver.
• Easy-access service panel provides hassle-free operations for greater efficiency.
Electronic Features
• Self-contained battery cables hook up to the vehicle’s 12-volt battery
• Automatic monitoring of fluid in new and used fluid tanks assures safe operation
• Accurate sensor technology
• LCD counter display with cumulative ATF options
• Ability to exchange anywhere from 1 to 35 quarts in 1 quart intervals
• Drain used fluid tank (no need to tip machine upside-down)
• Drain new fluid tank
• Ability to pause machine during exchange to change transmission filter
• Battery backup allows machine to resume where it left off should it lose power
• Add new fluid to transmission in 2/10 quart increments (approx. 1/8” on the dipstick)
• Remove fluid from transmission in 2/10 quart increments (approx. 1/8” on the dipstick)
• Cycle valves feature allows you to electronically clean out valves
• Totalizer check (indicates lifetime use)
• Interactive menu:
- “Auto Prime” feature automatically primes the system
- Indicate new fluid volume
- Indicate used fluid capacity
- Read battery voltage
Power Steering Fluid Exchange Unit (EETF304B Only)
• Remote pendant for ease of operation
• Compartment for new fluid bottle
• Drains directly to waste tank
Operations Manual
Printed in the U.S.A. for Snap-on ®
9
Snap-on® HD35L SERIES™
II. System Features & Specifications
2.02 DIMENSIONS & TECHNICAL SPECIFICATIONS
DIMENSIONS:
39 1/2" Tall
23" Wide
25 1/2" Deep
Service Hoses:
10’ outside of machine
Wheels:
5” locking casters (front)
5” casters (back)
Fluid Tanks:
40-Quart New Fluid Tank
40-Quart Used Fluid Tank
Weight:
135 lbs.
TECHNICAL SPECIFICATIONS:
Power:
12-Volt DC from vehicle battery
Fluid Sensors:
Accurate sensor technology
Filters:
22-micron absolute fluid filters
Operating Temperature:
65º to 150ºF (15º to 65ºC)
10
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
II. System Features & Specifications
2.03 MACHINE OVERVIEW
Operations Manual
Printed in the U.S.A. for Snap-on ®
11
Snap-on® HD35L SERIES™
III. Operating Procedures
III. OPERATING PROCEDURES
3.01 SUGGESTED ADDITIONAL TOOLS
CAUTION
• Frequently inspect and clean any tools used, and lubricate all non-sealed ratchet
mechanisms with light oil.
• The use of any other accessories not specified in this manual may create a hazard.
• Read, understand and follow Safety Instructions in the front pages of this manual and on
product safety labels.
12
Line Wrenches
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4"
End Wrenches
3/8”
7/16”
1/2"
9/16”
5/8”
11/16”
3/4”
Hex Wrenches
1/8”
11/16”
Nut Drivers
(American)
3/16”
1/4”
5/16”
3/8”
7/16”
Nut Drivers
(Metric)
6 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
Filter Band Clamp
For replacing canister filters
Metric End or
Line Wrenches
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
Screwdrivers
Phillips
Standard
1 long
1 long
1 short
1 short
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
III. Operating Procedures
IMPORTANT
Turn vehicle’s A/C system OFF before starting an exchange.
New transmission fluid MUST be 65°F or above for optimal performance.
FIRST TIME OPERATION (Priming the System)
(Only necessary when machine is received, before first operation.)
System must be primed before first use.
1. Connect machine to battery
2. Make sure fluid is in new fluid tank
3. Connect the red and black service hoses together using the adapters
4. Press 0
5. Press 5
6. Press START
TECHNICAL SUPPORT
If you experience any problems or have any questions, call technical support at:
1-800-225-5786 (U.S.)
1-800-661-1786 (Canada)
Operations Manual
Printed in the U.S.A. for Snap-on ®
13
Snap-on® HD35L SERIES™
III. Operating Procedures
14
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Operations Manual
III. Operating Procedures
Printed in the U.S.A. for Snap-on ®
15
Snap-on® HD35L SERIES™
III. Operating Procedures
16
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Operations Manual
III. Operating Procedures
Printed in the U.S.A. for Snap-on ®
17
Snap-on® HD35L SERIES™
III. Operating Procedures
18
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Operations Manual
III. Operating Procedures
Printed in the U.S.A. for Snap-on ®
19
Snap-on® HD35L SERIES™
III. Operating Procedures
20
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Operations Manual
III. Operating Procedures
Printed in the U.S.A. for Snap-on ®
21
Snap-on® HD35L SERIES™
III. Operating Procedures
22
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Operations Manual
III. Operating Procedures
Printed in the U.S.A. for Snap-on ®
23
Snap-on® HD35L SERIES™
III. Operating Procedures
24
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
IV. Hoses & Adapters
IV. HOSES & ADAPTERS
CAUTION
• Do not replace worn parts individually. If adapter hose fittings become worn, see
“Ordering Replacement Parts” to order new hoses.
• The use of any other accessories not specified in this manual may create a hazard.
• Read, understand and follow Safety Instructions in the front pages of this manual and on
product safety labels.
4.01 ADAPTER HOSES
STANDARD HOSES
941801- Hose #51
(Mates with #52)
941802- Hose #52
(Mates with #51)
-Green- 5/8”-18 [F]
SAE 45 Flare - Swivel
(Chrysler - 1993 and Newer)
-Green- 5/8”-18 [M]
SAE 45Flare
(Chrysler)
-Blue-
941803- Hose #53
(Mates with #57)
-Black941805- Hose #55
(Mates with Step Fitting)
-Blue941807- Hose #57
(Mates with #53)
-Black941809- Hose #59
(Mates with Step Fitting)
-Black941813- Hose #63
(Mates with Step Fitting)
941815- Hose #65
(Mates with #75)
Operations Manual
5/8”-18 [M]
SAE 45 Flare - Swivel
(General Motors with 3/8" Tube Diameter Lines - All Years)
3/8” Diameter Hose [F]
Open End Hose w/Clamp
(Import - 1987 and Newer)
5/8”-18 [F]
SAE 45 Inverted
(General Motors with 3/8” Tube Diameter Lines - 1997 and
Newer)
1/2” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
5/16” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
-Green- 1/4”-18 [M]
NPTF
(Jeep Cherokee- 1980-1986)
Printed in the U.S.A. for Snap-on ®
25
Snap-on® HD35L SERIES™
IV. Hoses & Adapters
-Red-
1/2”-20 [F]
SAE 45 Inverted
(Chrysler, Ford Aerostar, Jaguar, Mercedes,& Cadillac-1985 and
Newer) * Needs Ford Slide Tool 940140 for Aerostar / Windstar
-Red-
1/2”-20 [M]
SAE 45
(Chrysler and Ford)
-Red-
5/8”-18 [M]
SAE Inverted - Swivel
(Ford With Large Nut Adapter - 1980 and Newer)
941816- Hose #66
(Mates with #67)
941817- Hose #67
(Mates with #66)
941818- Hose #68
(Mates with #69)
-Red-
5/8”-18 [F]
SAE Inverted
(Ford)
-Blue-
1/2”-20 [M]
SAE 90 Inverted - Swivel
(General Motors with 5/16" Tube Diameter Lines - All Years)
-Blue-
1/2”-20 [F]
SAE Inverted
(General Motors & Ford Expedition)
-Red-
1/2”-20 [F]
SAE Inverted
(Ford)
-Red-
1/2”-20 [M]
SAE 90 Inverted - Swivel
(Ford 5/16" Small / Long Nut Adapter - 1980 and Newer)
941819- Hose #69
(Mates with #68)
941820- Hose #70
(Mates with #71)
941821- Hose #71
(Mates with #70)
941822- Hose #72
(Mates with #73)
941823- Hose #73
(Mates with #72)
941825- Hose #75
(Mates with #65)
-Green- M14 x 1.5 [F]
Swivel O-ring
(Jeep Cherokee, Ford Escort - 1980-1986)
-Red-
M14 [F]
Banjo Fitting
(Ford Escort – 1994 and Newer)
-Red-
M14 x 1.5 [M]
Bolt w/ 2 Washers
(Ford Escort - 1994 and Newer)
940874- Hose #78
(Mates with #79)
940875- Hose #79
(Mates with #78)
941828- Hose #80
(Mates with #81)
26
-Black- 1/4” [M]
Universal Bump Fitting
(Import)
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
941829- Hose #81
(Mates with #80)
941830- Hose #82
(Mates with #63)
941831- Hose #83
(Mates with #55)
941832- Hose #84
(Mates with #59)
941835- Hose #87
(Mates with #88)
941836- Hose #88
(Mates with #87)
941841- Hose #89
(Mates with #90)
941842- Hose #90
(Mates with #89)
IV. Hoses & Adapters
-Black- 1/4” Diameter Hose [F]
Open End Hose w/Clamp
(Import)
-Black- 5/16” [M]
Universal Bump Fitting
(Infiniti, Lexus, and BMW - 1980 and Newer)
-Black- 3/8” [M]
Universal Bump Fitting
(Toyota, Nissan, Honda, Ford and Chrysler - 1975 and Newer)
-Black- 1/2” [M]
Universal Bump Fitting
(Toyota, Nissan and Honda - 1980 and Newer)
-Green- 9/16”-18 [M]
JIC 37° Flare - Inverted
(Dodge Durango/Dakota - All Years)
-Green- 9/16”-18 [F]
JIC 37° Flare - Swivel
(Dodge Durango/Dakota - All Years)
-Black- 3/4”-16 [M]
SAE O-Ring
(Chevy DuraMax w/Allison Transmission – 2001 & Newer)
-Black- 3/4”-16 [F]
SAE O-Ring Adapter
(Chevy DuraMax w/Allison Transmission – 2001 & Newer)
-Red-
5/8-18 [M]
(Ford Focus / Mercury Mystique)
-Red-
5/8-18 [F]
(Ford Focus / Mercury Mystique)
941080- Hose #93
(Mates with #94)
941081- Hose #94
(Mates with #93)
940388- Hose #124
(Mates with #142)
940389- Hose #142
(Mates with #124)
-Yellow- 3/4”-18 [M]
90° Inverted SAE 45° - Swivel
(Ford Torqshift / 250SD / 550SD / Econoline / Excursion)
-Yellow- 3/4”-18 [F]
Inverted SAE 45° Rigid - Straight
(Ford Torqshift / 250SD / 550SD / Econoline / Excursion)
-Yellow-
941900- Hose #149
(Mates with 5/8” Adapter)
Operations Manual
5/8” Diameter Hose [F]
Open End Hose w/Clamp
(Chevy DuraMax w/Allison Transmission - 2003 & Newer)
Printed in the U.S.A. for Snap-on ®
27
Snap-on® HD35L SERIES™
IV. Hoses & Adapters
941178
(EETF304B Only)
1/2” Diameter PSX Y-Adapter
(All Vehicles)
ALLISON HOSES (Optional)
941844- Hose #134
-Yellow- #16 PTT Thread
[Male]
(Mates with #135)
941845- Hose #135
-Yellow- #16 PTT 30° Swivel
[Female]
(Mates with #134)
941846- Hose #136
-Yellow- #12 SAE
[Male]
(Mates with #137)
941847- Hose #137
-Yellow- #12 SAE
[Female]
(Mates with #136)
941848- Hose #138
-Yellow- #16 JIC
[Female]
(Mates with #139)
941849- Hose #139
-Yellow- #16 JIC
[Male]
(Mates with #138)
941850- Hose #140
-Yellow- #10 JIC
[Female]
(Mates with #141)
941851- Hose #141
-Yellow- #10 JIC
[Male]
(Mates with #140)
941893- Fitting
#12 ORFS
[Male]
(Mates with #143)
-Yellow- #12 ORFS
[Female]
(Mates with 941893 Fitting)
941894- Hose #143
941895- Hose #144
-Yellow- #12 JIC
[Male]
(Mates with #145)
28
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
941896- Hose #145
IV. Hoses & Adapters
-Yellow- #12 JIC Swivel
[Female]
(Mates with #144)
941897- Hose #146
-Yellow- 1 1/16-1 w/ O-Ring
[Female]
(Mates with #147)
941898- Hose #147
-Yellow- 1 1/16-1 Flat Face
[Male]
(Mates with #146)
941903- Hose #152
-Yellow- #10 ORFS
[Female]
(Mates with #153)
941904- Hose #153
-Yellow- #10 ORFS
[Male]
(Mates with #152)
4.02 ADAPTERS
The following adapters allow quick and easy hookup to virtually any vehicle make and model.
940328
1/2” Adapter
942163S
GM Adapter
942162
Quick Disconnect Tool
940329
3/8” Adapter
940334
5/16” Adapter
941910
3/8” Ford Adapter
942169
5/8” Medium GM Adapter
941899
5/8” Duramax Adapter
940831
Master Hose Connector
941966
Slider Pin Adapter (Optional)
Operations Manual
Printed in the U.S.A. for Snap-on ®
29
Snap-on® HD35L SERIES™
V. Troubleshooting & Maintenance
V. TROUBLESHOOTING & MAINTENANCE
COMMON PROBLEMS / SOLUTIONS
Problem: “Power Failure” screen displays
Solution 1: Check battery connection. Make sure there are no loose connections, and the
machine’s battery clips are not reversed. Remove all corrosion from the battery
terminals. Make sure vehicle’s A/C system is turned off.
Solution 2: The vehicle’s battery is not putting out enough voltage to run the machine.
Connect the machine to a better 12V power source.
Stand-alone shelf batteries will not work.
MAINTENANCE PROCEDURES
• Replace Canister Filters (Part#: 940796A) when machine prompts you to do so:
Use a standard filter band clamp tool to unscrew old filters, and replace them with new filters.
Make sure new filters are on tight.
• Clean Waste Fluid Screen (Located in bottom of recessed hose tray area)
This helps eliminate surface tension caused by debris and contamination from the air.
Using a sharp pick, remove screen. Clean using degreaser and brush, and blow out with air
compressor.
• Periodically Wipe Down Exterior using a soft, damp cloth.
30
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
VI. Ordering Replacement Parts
VI. ORDERING REPLACEMENT PARTS
REPLACEMENT PART LIST
Part #
Description
NOR942089W
NOR942090W
NOR942088W
NOR940304
Control Panel w/ Elec. Board & Label (EETF303B) [FX]
Control Panel w/ Elec. Board & Label (EETF304B) [MFX]
Control Panel w/ Elec. Board & Label (EETF306A) [FXD]
Battery Cable Assembly
NOR941617W
NOR940469
NOR941613
NOR941226
Motor Control Box
Sensor Rod
27 1/2" Fluid Tube
Fluid Tube Elbow Fitting
NOR940551
NOR940468W
NOR940843
NOR940839
NOR940840
NOR940841
NOR940842
PSX Fill Pump [EETF304B Only]
Manifold/Pump Assembly
Pressure Switch (Factory preset to 6 psi)
3/2 Solenoid Valve [Short] (S2)
3/2 Solenoid Valve [Tall] (S1)
Coil with Spade Connector [Short] (S2)
Coil with Spade Connector [Tall] (S1)
NORR940775
NOR941168
NORP940927
NOR941220
NORR940985
NORR941171
NORR942094
Standard Hose Kit
Allison Hose Kit (Optional)
Hose Tray
Hose Rack
Internal Hose Kit (EETF303B) [FX]
Internal Hose Kit (EETF304B) [MFX]
Internal Hose Kit (EETF306A) [FXD]
NOR940831
NOR940785
NOR940786
NOR940787
NOR940788
NOR940837
NOR940834
NORR940663
NOR940922
NOR940913
NOR941716W
NOR941728
NOR941708
NORR940557
Master Hose Connector
Service Hose Black
Service Hose Red
Service Hose Black (PSX) [EETF304B Only]
Service Hose Red (PSX) [EETF304B Only]
12" Tube w/ Air Nipple (PSX) [EETF304B Only]
Pendant Assembly (PSX) [EETF304B Only]
Pendant Switch (PSX) [EETF304B Only]
Dock Magnet Assembly (PSX) [EETF304B Only]
New Power Steering Fluid Bottle [EETF304B Only]
Dipstick Manifold Assembly [EETF306A Only]
Gray Service Hose [EETF306A Only]
Dipstick Reducer [EETF306A Only]
5/16” x 6’ Poly Tube [EETF306A Only]
Operations Manual
Printed in the U.S.A. for Snap-on ®
31
Snap-on® HD35L SERIES™
VI. Ordering Replacement Parts
NOR942098
NOR942097
NOR942099
NOR942113
NOR942095
NOR942096
NOR942087
Chassis Red
Top Sink Red
Console Gray/Blk
Tank Cap
Red Tank - New Fluid
Red Tank - Waste Fluid
Service Panel Label
NORR942118
NORR942137
Locking Caster Wheel
Caster Wheel
NOR940905
NOR940796A
NORR942150
Vinyl Mat
Canister Filter
Used Fluid Screen (1 1/4" Diameter)
NOR942085
NOR942084
NOR942083
NOR942082
NOR942081
NOR942080
NOR942079
NOR940844
32
Operations Manual
Quick Start & Add’l Functions Bundle Set (EETF303B) [FX]
Quick Start & Add’l Functions Bundle Set (EETF304B) [MFX]
Quick Start & Add’l Functions Bundle Set (EETF306A) [FXD]
Additional Function Instructions (EETF304B) [MFX]
Quick Start Instructions (EETF306A) [FXD]
Additional Function Instructions (EETF306A) [FXD]
Adapter Instruction Sheet
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
VI. Ordering Replacement Parts
REPLACEMENT PART ILLUSTRATIONS
Operations Manual
Printed in the U.S.A. for Snap-on ®
33
Snap-on® HD35L SERIES™
VI. Ordering Replacement Parts
ORDERING INFORMATION
To order replacement parts for the Snap-on HD35L SERIES, call:
1-800-225-5786 (U.S.)
1-800-661-1786 (Canada)
34
Printed in the U.S.A. for Snap-on ®
Operations Manual
Snap-on® HD35L SERIES™
Warranty Information
LIMITED ONE (1) YEAR WARRANTY
Snap-on EETF303B, EETF304B & EETF306A
Snap-on warrants only to the original Purchaser that under normal use, care and service, the
Equipment (except as otherwise provided herein) shall be free from defects in material and
workmanship for one year from the date of original invoice. External hoses, remote control
modules, adapters and all other attachments, supplies and consumables (except as otherwise
provided herein) are warranted for 90 calendar days from the date of original invoice. Filter
elements are not warranted. Printed circuit boards purchased from, but not installed by Seller are
not warranted.
SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE
REPAIR OR, AT SELLER’S OPTION, REPLACEMENT OF EQUIPMENT OR PARTS WHICH
TO SELLER’S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE
NECESSARY, IN SELLER’S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD
OPERATING CONDITION. NO OTHER WARRANTIES EXPRESS OR IMPLIED OR
STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND
ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
This warranty does not cover (and separate charges for parts, labor and related expenses shall
apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment
caused by, resulting from or attributable to (A) abuse, misuse or tampering; (B) alteration,
modification or adjustment of the Equipment by anyone other than Seller’s authorized
representatives; (D) improper or negligent use, application, operation, care, cleaning, storage or
handling; (E) fire, water, wind, lightning or other natural causes; (F) adverse environmental
conditions, including, without limitation, excessive heat, moisture, corrosive elements, or dust or
other air contaminants, radio frequency interference, electric power failure, power line voltages
beyond those specified for the equipment, unusual physical, electrical or electromagnetic stress,
and/or any other condition outside of Seller’s environmental specifications; (G) use of the
Equipment in combination or connection with other equipment, attachments, supplies or
consumables not manufactured or supplied by Seller; or (H) failure to comply with any applicable
federal, state or local regulation.
Repairs or replacements qualifying under this Warranty will be performed on regular business
days during Seller’s normal working hours within a reasonable time following Purchaser’s
request. All requests for Warranty service must be made during the stated Warranty period.
This warranty is non-transferable.
Operations Manual
Printed in the U.S.A. for Snap-on ®
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement