INSTROTECH OVERVIEW CATALOGUE 2014

INSTROTECH OVERVIEW CATALOGUE 2014

INSTROTECH OVERVIEW CATALOGUE

2014

CALOG

I N S T R U M E N T S

®

CORP

TM

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Rev2014021-17

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

About us

Our Sales Teams contact details are below

Internal Sales :

General :

Joyce Adams

: [email protected], tel : +27 (0) 11 462 1920

Technical

Sales Consultants:

Nevash Jagarnath

: [email protected], tel : +27 (0) 11 462 1920

North West / Limpopo / Pretoria / Centurion / Northern Cape / Mpumalanga / Midrand

Pieter Hugo

: [email protected], mobile : +27 (0) 82 409 8295

Kwa-Zulu Natal / Swaziland :

Giles Wilcox

: [email protected], mobile : +27 (0) 72 967 6617

Sales Director :

Scott Hunter

: [email protected], mobile : +27 (0) 82 550 2558

The Benefit's to partnering with Instrotech (Pty) Ltd:

Experience:

Instrotech (Pty) Ltd (Instrotech) was formed in 1981 to create and supply high quality process control instrumentation and industrial electronics to address local and international market requirements. As part of our commitment to support and offer our customers a

!

total solution, we: represent a number of leading international process control instrumentation manufacturers in South Africa, supported by an experienced sales and support team. locally design and develop technology comprising of panel meters, displays and transmitters as well as specialised products, including the INSPECTA FFT acoustic leak detection system for detecting tube leaks in coal fired utilities, oxygen plants and gasifiers and the Calog Calibrator range for troubleshooting and calibration in the process industry. These systems and products are sold all over the world.

With over thirty years of experience and an unrelenting focus on technology, performance, quality and good value, Instrotech has established itself as a trustworthy technology partner.

Quality:

Instrotech's range of high quality products are backed by a well trained, professional sales and technical support team who are focused on offering a comprehensive and friendly service to ensure our customer's needs are met and to guarantee them peace of mind throughout the purchasing process. All Instrotech's manufacturing and processing systems comply with ISO9001 standards.

Variety:

Instrotech offers a wide range of quality process control and automation instruments, not limited to any one particular technology.

This gives the team at Instrotech the freedom to collaborate with their customers to meet their specific industry requirements and deliver solutions that are easy and quick to implement and deliver on the required results.

Page 2

WWW.INSTROTECH.CO.ZA

Index

Suppliers

Agenc

y

Amprobe

Calog

Calog Calibrators

Calog by Instrotech

Ebro

Fluke

Keller

Kobold

Leitenberger

MCB

Monitran

Michell

Optis

Rototherm Canongate

Selet

Senix

Siko

Vishay

Products

Accelerometers

Acoustic Leak Detection

Bypass Level Indicators

Calibrators

Counters

Data Loggers

Dead Weight Testers

Digital Indicators

Draw Wire Encoders

Extra Large Displays

Flow Counters

Flow Meters

Flow Switches

Geared Potentiometer

Hydraulic Hand Pumps

Humidity Transmitters

Indicator Enclosures

Infrared Thermometers

Infrared Camera’s

Intrinsically Safe Calibrators

Loadcells

Loadcell Transmitters

Linear Pots

Level Transmitters

Magnetic Length Measurement

Panel Meters

Pressure Gauges

Pressure Switches

Pressure Transmitters

Proximity Switches

Pneumatic Hand Pumps

Position Indicators

Ultrasonic Level Transmitters

Radio Transmitters / Receivers

Rotary Encoders

Rotameters

Temperature Selector Switches

Temperature Transmitters

Thermocouples

Tube Leak Detection - Acoustic

Vibration Transmitters

Wireless Gateways

Description

Tacho Meters

Panel Meters / Transmitters / Wireless

Calibrators

Panel Meters / Transmitters

Data Loggers

Calibrators

Pressure Transmitters / Gauges

Flow Meters / Level Sensors

Pressure and Temperature Calibration

Linear Pots

Vibration Transmitters

Humidity / Temperature Transmitters

Infrared Temperature Sensors / Camera’s

Non Invasive Level / Density Transmitter

Proximity Switches

Ultrasonic Level Transmitters

Linear / Rotary Indicators / Sensors

Loadcells

Products

26

26

5

24, 25

24

17

8, 9, 10, 11

5, 6, 7

29

15, 22, 23

13

4, 5, 6, 7

17, 18

18

17, 18, 19

28, 29

26

14, 15

15, 23

6

12

19, 20

5

Page

28

29

22

16, 17, 26, 27

4, 5

18, 25

26

4, 5, 6

13

6

22

19, 20, 21, 22

20

14

6, 7

30

29

28

8

Page

15,

4, 5, 7, 8

16

4, 6, 7

25

17

17, 18

18, 19, 20, 21, 22

26, 27

29

28

26

24, 25

23, 24

28, 29

15

12, 13, 14, 15

8, 9, 10, 11 instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Page 3

Calog by Instrotech

Panel Mount Indicators

CALOG

instrotech instrotech

INSTRUMENTATION AND PROCESS CONTROL

PANEL MOUNT INDICATORS

4004

5004

5012

5012-C

5012-Q

5002

4011

5011

MODEL DESCRIPTION

4001 4-digit process/counter/frequency indicator

5001

4015

5015

5016

4-digit dual input process indicator

Two by 3 digit process input indicator

5600

8001

4006

5001-T

8001-T

4003

6-digit process indicator

8-digit process/counter/frequency indicator

4-digit high voltage/high current indicator

4-digit universal temperature indicator, thermocouple/RTD

Optional for Ni 100, Pt500 & Pt1000

4-digit loadcell indicator/controller (Includes option 3010 and 3014)

5 / -d igit gray code/binary or 6 digit BCD indicator

4-digit ASCII Bus protocol serial bus indicator

DIMENSIONS: 48 x 96mm PANEL CUTOUT: 45 x 92mm DEPTH: 140mm

OPTIONS FOR ABOVE PANEL MOUNT INDICATORS

OPTIONS

3000

3001P/M

3002

3003

3004P/M

3006

3008

3009

3010

3011

3012

3013

3014

3017P/M

3018P/M

3019

3020

3021

3022

3024

3025

3026

3028

3029

3030

Lineariser /squareroot/log/S-curve/16 point

Dual setpoints/alarms (Photomos / electromechanical)

RS-485 output

0/4-20mA/0-10Vdc retransmission -(Analogue output)

1 setpoint/alarm (Photomos / electromechanical)

Fully isolated V or I output (add to 3003, 3002, 3013)

Galvanic isolated dc power supply (10 to 30 Vdc)

Parallel BCD output

(Cannot be used with 3017/3018)

Switch mode power supply (95 to 265Vac/dc)

Ohms tap input

Peak hold (0.5 Seconds)

RS-232 output

Auto zero/tare

3 setpoints/alarms (Photomos / electromechanical)

4 setpoints/alarms (Photomos / electromechanical)

Green display

AlGaAs ultra bright display

Mains frequency (50.00 Hz)4001 add

Bar graph display (Vertical)

Auto manual station (include 3003)

Key pad lock

Display hold

Non-isolated dc power supply (10-30V) not 4/5004

Time and date stamp

Low voltage ac frequency input

A Comtest Group Company

Page 4

WWW.INSTROTECH.CO.ZA

Calog Instruments

Panel Mount Indicators

CALOG

I N S T R U M E N T S

®

PANEL MOUNT INDICATORS

MODEL DESCRIPTION

CALOGBAR Bar graph process controller (0/4-20mA or 0-2/10V)

CALOGLCD

CALOG216-LCD

CALOG106B-WEI

CALOG106-CTR

CALOG106-FLO

CALOG106-PRO

5 1/2 digit LCD, 4-20mA loop powered display

6 digit backlit LCD, 4-20mA loop powered display

6 digit loadcell batching controller (4/6 wire strain gauge, 1-5mV/V)

6 digit counter/rate indicator (NPN, PNP, TTL, namur, tacho, closed contact)

6 digit flow rate dual totalizer (NPN, PNP, TTL, namur, tacho, closed contact)

6 digit process controller (0/4-20mA or 0-2/10V)

PANEL MOUNT QUAD CHANNEL CONTROLLERS/INDICATORS

MODEL DESCRIPTION

CALOG106Q-CTR 6 digit quad counter/rate batching controller (1x. 2x, 4x, NPN, PNP, TTL)

CALOG106Q-PRO

CALOG106Q-RTD

CALOG106Q-TC

6 digit quad process controller (4 x 0/4-20mA)

6 digit quad RTD controller (4 x RTD Pt100, 385/392/Cn10)

6 digit quad thermocouple controller (4 x thermocouple J, K, N, R or T type)

PANEL MOUNT DUAL DISPLAYS CONTROLLERS/INDICATORS

MODEL DESCRIPTION

CALOGDUAL-CTR Dual diaplay counter/rate batching controller (Quad (x1, x2, x4), NPN, PNP,

TTL)

CALOGDUAL-DEW

CALOGDUAL-FLO

Dual display humidity/temperature controller (Wet & dry bulbs,

RTD 385/392, Pt100)

Dual display flow batching totalizer (NPN, PNP, TTL, namur, tacho, closed contact)

OPTIONS FOR ABOVE PANEL MOUNT INDICATORS

-HV

-LV

-R2

-R4

-A

-S2R

-S4S

85-265Vac / 95-370Vdc

15-48Vac / 10-72Vdc

2 x relay outputs

4 x relay outputs

1 x mA/V analogue output

1 x RS-232 serial (RJ11)

1 x RS-485 serial (screw)

INDICATOR ENCLOSURES

MODEL DESCRIPTION

ACC04 Table top for one Calog DPM

ACC05 Table top for two Calog DPMs

ACC06

ACC07

IP65 wall mount enclosure for one Calog DPM + pcb

Table top for one Calog DPM + nicads + charger

TEMPERATURE SELECTOR SWITCHES

MODEL DESCRIPTION

SW-4 Temperature switch 4-way 3-pole PT100/TC

SW-6 Temperature switch 6-way 2-pole PT100/TC

SW-12 Temperature switch 12-way 1-pole TC only instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

CALOGLCD

NEW

NEW

ACC06

WWW.INSTROTECH.CO.ZA

Page 5

Calog by Instrotech

Remote and Ex Large Displays

CALOG

instrotech instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

REMOTE AND EXTRA LARGE DISPLAYS

MODEL DESCRIPTION

Remote 7 segment display, polycarbonate housing : 225 x 162 x 65mm

7544 5 digit ASCII bus/DIG Bus, 45mm display

7454 4 digit ASCII bus/DIG Bus, 57mm display

IP65 metal housing : 500 x 200 x 120mm

1304 3 digit 125mm LED ASCII bus/DIG Bus

1404 4 digit 125mm LED ASCII bus/DIG Bus

IP65 metal housing : 600 x 300 x 120mm

2304

2404

2504

3 digit 125mm LED ASCII bus/DIG Bus

4 digit 125mm LED ASCII bus/DIG Bus

5 digit 125mm LED ASCII bus/DIG Bus

IP65 metal housing : 800 x 300 x 120mm

2604 6 digit 125mm LED ASCII bus/DIG Bus

RADIO TRANSMITTERS / RECEIVERS

MODEL DESCRIPTION

RAD100 Wireless data transmission from panel mount indicator to large display

RS-232 and RS-485 avaliable, 8-30 Vdc supply, license free

Operation in 2.4 GHz band

TWO WIRE PROCESS TRANSMITTERS

MODEL DESCRIPTION

9300 Dual setput transmitter unit (Change over contacts)

9500 Two-wire transmitter, inputs - potentiometer/Volts/mA

9600-1

9600-2

Single input loop isolator 0-32 mA/0-32 mA

Dual input loop isolator 0-32 mA/0-32 mA

7454

2504

FIELD MOUNT LOADCELL TRANSMITTERS

MODEL DESCRIPTION

6004LC Loadcell transmitter with 6 digit LED display and 4-line LCD, analogue output,USB and SD card supplied standard

6004BW

6004MF

Beltweigher transmitter with 6 digit LED display and 4-line LCD, analogue output, USB, SD card , PI control and six relays supplied as standard.

Multi-function weighing controller, 6 digit LED display and 4-line LCD analogue output, USB, SD card , PI control and six relays supplied as standard.

Options

3001MF

3002MF

3013MF

3018MF

3030MF

Dual relay

RS-485 communication

RS-232 communication

Four relay

Six relay

NEW

6004MF APPLICATIONS

Loadcell Transmitter,

Batch Controller,

Bagfiller,

Loss-in-Weight Controller,

Dyno-Meter,

Through-Put Weigher.

PROGRAMMABLE HEAD MOUNT TEMPERATURE TRANSMITTERS

MODEL DESCRIPTION

CALOGTW-HMT 2-Wire RTD transmitter (head mount, loop powered, non-isolated)

CALOGTW-HMT-ISO 2-Wire RTD/TC transmitter (head mount, loop powered, isolated)

NEW

Page 6

WWW.INSTROTECH.CO.ZA

Calog by Instrotech

DIN Rail Mount Transmitters

CALOG

instrotech

PROGRAMMABLE DIN RAIL PROCESS TRANSMITTERS

MODEL DESCRIPTION

CALOG9000 Programmable process transmitter, isolated supply/input/output

CALOG9240

CALOG9004

CALOG9244

Switch mode supply: 95-265Vac/dc, inputs: mV, V, mA, J, K, N, S, R, T, W5,

PT100, frequency, output: 4 -20mA or 0-10 Vdc, RS-232 communication standard

As above with 24Vdc supply(Isolated)

Loadcell transmitter, isolated supply/input/output

Switch mode supply: 95-265Vac/dc, input: maximum of 4 loadcells

Output: 4-20 mA or 0-10 Vdc, RS-232 communication standard

As above with 24Vdc supply (isolated)

CALOG9006 High current/voltage transmitter, isolated supply/input/output

Switch mode supply: 95-265Vac/dc, Input: maximum 5A ac or 400 Vac

Output: 4-20mA or 0-10Vdc, RS-232 communication standard

OPTIONS FOR ABOVE PROGRAMMABLE DIN RAIL PROCESS TRANSMITTERS

OPTIONS

-3001PD

-3002PD

-3004PD

Dual alarm option (Photomos SPNO)

RS-485 communication (Replaces RS 232)

Single alarm option (Photomos SPNO)

*All units set via RS-232 port. Software and cable supplied at no extra charge on request.

PROGRAMMABLE DIN RAIL PROCESS CONTROLLERS

MODEL DESCRIPTION

CALOGDR-CTR DIN rail counter/rate controller (Quad (x1, x2, x4), NPN, PNP, TTL)

CALOGDR-DEW

CALOGDR-FLO

CALOGDR-PRO

CALOGDR-RTD

CALOGDR-TC

CALOGDR-UAR

CALOGDR-WEI

DIN rail mount humidity/temperature controller (Wet & dry bulbs,

RTD 385/392, Pt100)

DIN rail mount flow rate totalizer (NPN, PNP, TTL, namur, tacho, closed contact)

DIN rail mount process controller (0/4–20mA)

DIN rail mount temperature controller (RTD Pt100/ Pt1000, 385/392/120/Cn10)

DIN rail mount temperature controller

(Thermocouple B, J, K, N, R, S or T Type)

DIN rail mount universal ac controller (0–5A ac or 0–300Vac)

DIN rail mount loadcell batching controller (4/6 Wire Strain Gauge, 1–5mV/V)

OPTIONS FOR ABOVE PROGRAMMABLE DIN RAIL PROCESS TRANSMITTERS

OPTIONS

-HV

-LV

-A

-S2R

-S4S

85-265Vac / 95-370Vdc

15-48Vac / 10-72Vdc

1 x mA/V analogue output

1 x RS-232 serial (RJ11)

1 x RS-485 serial (screw)

ISOLATED UNIVERSAL TRANSMITTERS

MODEL DESCRIPTION

CALOGTW2-ISO 2-Wire universal transmitter (DIN mount, loop powered, isolated)

CALOGTW4-ISO 4-Wire universal transmitter (DIN mount, user powered, isolated) instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

NEW

NEW

WWW.INSTROTECH.CO.ZA

Page 7

Calog Instruments

DIN Rail Mount Transmitters

CALOG

I N S T R U M E N T S

®

TW SERIES USB PROGRAMMING KIT

MODEL DESCRIPTION

CALOGTW-USB USB programmer, head mount adaptor, transmitter/programmer interface

CALOGTW-SOFT cable and USB extension cable

Calog TW programming software

WIRELESS GATEWAYS

MODEL DESCRIPTION

CALOGWL-PTH-ZS2 Wireless pathfinder selectable base/node (2 x RS-232, RS-422 / 485)

CALOGWL-PTH-ZE

CALOGWL-SLB

Wireless pathfinder selectable base/node (1 x ethernet Modbus / RTU)

Wireless sleeper node, battery powered, non-routing

CALOGWL-SLR Wireless sleeper unit, user powered, routing

CALOGWL-OPT –IO Digital IO: (2 x relay outputs, 4 x digital inputs and 2 x digital outputs)

(WL-PTH only)

MULTI CHANNEL CONTROL STATION

MODEL DESCRIPTION

CALOGMCS-16-ETH Monitoring and control station - 16 universal isolated inputs

CALOGMCS-16-RS

2 analogue outputs, 4 digital inputs, 2 relays

2 serial ports (Port 1 = ethernet, port 2 = RS-485 / 232)

Monitoring and control station - 16 universal isolated inputs

2 analogue outputs, 4 digital inputs, 2 relays

2 serial ports (Port 1 = RS-485 / 422, port 2 = RS-485 / 232)

OPTIONS FOR MULTI CHANNEL CONTROL STATION

MODEL DESCRIPTION

-RTC Data logging (30 000 samples) with real time clock

-RTC-SD

CALOG-MCS-RIO

Data logging (30 000 samples) with real time clock and micro SD slot

I/O expansions 16 x rely output, 16 digital input

CALOGMCS-XVI-C Configurator software

CALOGMCS-XVI-D Data viewer software v(Requires CALOGTW-USB kit)

LOAD CELL JUNCTION BOXES

MODEL DESCRIPTION

JB3 Junction box for 3 loadcells

JB4 Junction box for 4 loadcells

WWW.INSTROTECH.CO.ZA

UNIVERSAL S TYPE LOAD CELLS

MODEL DESCRIPTION

LC9363-xx Stainless steel (IP67)

LC363-xx

Capacity : 50kg, 100kg, 250kg, 500kg, 1000kg, 2500kg, 5000kg, 7500kg,

10 000kg.

Class : C3

Nickel plated (IP65)

Capacity : 50kg, 100kg, 250kg, 500kg, 1000kg, 2500kg, 5000kg.

Class : C3 instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

CALOGTW-USB

NEW

NEW

APPLICATIONS

Force Measurement

Suspended Hoppers

Page 8

www.vishaypg.com/load-cells

WWW.INSTROTECH.CO.ZA

Vishay Precision Group

Loadcells

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

RING TORSION LOAD CELL

MODEL DESCRIPTION

LCRLC-xx Stainless steel, hermetically sealed (IP68), low profile, ring torsion construction

Capacity : 0.25t, 0.5t, 1.0t, 2.0t, 3.5t, 5.0t, 10.0t, 28.0t

Class : C3

Available

ACCESSORIES

MNTRLC-003

MNTRLC-002

LCRLCFT-001

LCRLCFT-002

LCRLCFT-006

RLC mounting assemblies for 0.5ton to 5ton, material: stainless steel 304

RLC mounting assemblies for 10ton, material: stainless steel 304

Self aligning foot for 0.25ton to 1ton

Self aligning foot for 2ton to 5ton

Self aligning foot for 10ton (height adjustable)

APPLICATIONS

Silo

Hopper

Tank Weighing

Beltweigher

SINGLE ENDED BEAM LOAD CELLS

MODEL DESCRIPTION

LCSHBXR-xx Stainless steel, hermetically sealed (IP68),

Capacity : 5kg, 10kg, 20kg, 50kg, 100kg, 200kg, 350kg

Class : C3

ACCESSORIES

MNTSHBxR-002

MNTSHBxR-001

20 to 350kg mounting kit stainless steel,

Including base, mounting bolts and flanges

20 to 350kg mounting kit 3CR12,

Including base, mounting bolts and flanges

Available

APPLICATIONS

Platform Scales

Packaging Machines

Silo and Hopper

Weighing

LCACB-xx Stainless steel, hermetically sealed (IP68), low profile construction

Capacity : 0.5t, 1.00t, 2.00t, 5.00t

ACCESSORIES

MNTACB-001

MNTACB-003

LCACBFT-001

LCACBFT-002

0.5 ton to 2 ton and 5ton SS mounting kit

0.5 ton to 2 ton and 5ton 3CR12 mounting kit

Stainless steel alignment foot for 0.25ton to 2ton

Stainless steel alignment foot for 0.25ton to 5ton

APPLICATIONS

Platform Scales

Silo and Hopper

Weighing

LCSSB-xx Stainless steel, hermetically sealed (IP68)

Capacity : 0.5t, 1.0t, 2.0t, 5.0t, 10.0t,

Available

ACCESSORIES

LCMNTSSB-004

LCMNTSSB-005

LCMNTSSB-001

LCMNTSSB-003

0.5 ton to 2ton mounting kit, including base, mounting bolts and flanges SS

5ton mounting kit, including base, mounting bolts and flanges SS

0.5ton to 2ton mounting kit, including base, Mounting bolts and flanges 3CR12

5ton mounting kit, including base, mounting bolts and flanges 3CR12

APPLICATIONS

Platform Scales

Pulley Scales

Overhead Track Scales

Silo and Hopper

Weighing

www.vishaypg.com/load-cells

WWW.INSTROTECH.CO.ZA

Page 9

Vishay Precision Group

Loadcells

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

EXTENSOMETER - BOLT ON STRAIN GAUGE

MODEL DESCRIPTION

LC178 Alloy steel construction, hermetically sealed (IP66)

APPLICATIONS

Force Measurement on any load bearing structure.

Level Monitoring

MINIATURE DOUBLE ENDED BEAM LOAD CELL

MODEL DESCRIPTION

LCMDB-xx Nickel plated alloy steel, hermetically sealed (IP65)

Capacity : 10t, 20t, 25t, 30t, 40t, 50t

Class : C3

Mounting assembly included

APPLICATIONS

Track and Rail Scales

Silo, Hopper and Tank

Weighing

DOUBLE ENDED SHEAR BEAM LOAD CELLS

MODEL DESCRIPTION

LC5103-xx Nickel plated alloy steel, hermetically sealed (IP67), low profile construction

Capacity : 5k, 10k, 20k, 30k, 40k, 50k, 60k, 100k, 150k, 200k, 250k

Class : D3

Available

LC9103-xx Stainless steel, hermetically sealed (IP67), low profile construction

Capacity : 5k, 10k, 20k, 30k, 40k, 50k, 60k, 100k, 150k, 200k, 250k

Class : D3

APPLICATIONS

Platform Scales

Weighbridges

Silo and Hopper Weighing

ACCESSORIES

LCMNT5103-001

LCMNT5103-002

5103 Mounting kit stainless steel 304

5103 Mounting kit 3CR12

COMPRESSION LOAD CELLS

MODEL DESCRIPTION

LCCSPM-xx Stainless steel, hermetically sealed (IP68), low profile, multi column construction

Capacity : 10t, 25t, 40t, 60t, 100t

Available

ACCESSORIES

LCMNTCSPM-001

LCMNTCSPM-007

LCMNTCSPM-002

LCMNTCSPM-006

10 ton to 25 ton mounting kit stainless steel

40 ton to 60 ton mounting kit

s tainless steel

10 ton to 25 ton mounting kit 3CR12

40 ton to 60 ton mounting kit 3CR12

APPLICATIONS

Weighbridges

Silo and Hopper Weighing

Page 10

www.vishaypg.com/load-cells

WWW.INSTROTECH.CO.ZA

Vishay Precision Group

Loadcells

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

COMPRESSION LOAD CELLS (LOW COST)

MODEL DESCRIPTION

LCASC2-xx Stainless steel, hermetically sealed (IP68), self aligning, single column construction

Capacity : 30t, 40t, 50t

Class : 3

,

C6 (0.012% accuracy)

ACCESSORIES

LCMNTASC2-xx Self aligning mount for truck sales, rail scales and process weighing applications

COMPRESSION LOAD CELLS - HIGH CAPACITITES

MODEL DESCRIPTION

LCKSR-xx Stainless steel, sealed diaphragm (IP66), low profile, single column construction

Capacity : 6t, 13t, 28t, 60t, 130t, 280t

Class : R1

APPLICATIONS

Weighbridges

Silo and Hopper Weighing

APPLICATIONS

Vessel Weighing

High Capacity Platform

Scales

DIGITAL COMPRESSION LOAD CELLS

MODEL DESCRIPTION

LCSCC-xx Stainless steel, hermetically sealed (IP68), low profile, multi column construction

RS-485/422 full duplex, asynchronous serial transmission

Capacity : 10t, 25t, 40t, 60t, 100t

ACCESSORIES

LCMNTSCC-001

LCMNTSCC-002

LCMNTSCC-003

LCMNTSCC-004

10 ton to 25 ton mounting kit stainless steel

40 ton to 60 ton mounting kit stainless steel

10 ton to 25 ton mounting kit 3CR12

40 ton to 60 ton mounting kit 3CR12

DIGITAL BEAM LOAD CELLS

MODEL DESCRIPTION

LCSBC-xx Stainless steel, hermetically sealed (IP68),

RS-485/422 full duplex, asynchronous serial transmission

Capacity : 0.5t, 1t, 2t, 5t, 10t

Class : 3

,

ACCESSORIES

LCMNTSBC-001

LCMNTSBC-002

LCMNTSBC-003

LCMNTSBC-004

0.5 to 2 ton mounting kit, incl base, mounting bolts and flanges SS

5 to 10 ton mounting kit, incl base, mounting bolts and flanges SS

0.5 to 2 ton mounting kit, incl base, mounting bolts and flanges 3CR12

5 to 10 ton mounting kit, incl base, mounting bolts and flanges 3CR12

APPLICATIONS

Weighbridges

Silo and Hopper Weighing

APPLICATIONS

Platform Scales

Pallet Scales

Overhead Track Scales

Silo and Hopper Weighing

www.vishaypg.com/load-cells

WWW.INSTROTECH.CO.ZA

Page 11

Siko

Encoders

SHAFT ENCODERS - LIGHT DUTY PLASTIC (220 IMP/REV MAX)

MODEL DESCRIPTION

SIKIG06-AXX-xx Hollow shaft encoder, single channel

SIKIG06-ABX-xx

SIKIG06-ABO-xx

Hollow shaft encoder, dual channel

Hollow shaft encoder, dual channel and zero ref.

SIKIG16-AXX-xx

SIKIG16-ABX-xx

SIKIG16-ABO-xx

Solid shaft encoder, single channel

Solid shaft encoder, dual channel

Solid shaft encoder, dual channel and zero ref.

ACCESSORIES

SIKIG06-M2-xx

SIKIG06-HR-xx

M2 mounting flange

Bearings for high REVS, (15mm hollow shaft)

SHAFT ENCODERS - HEAVY DUTY ALUMINIUM (1024 IMP/REV MAX)

MODEL DESCRIPTION

SIKIG07-AXX-xx Hollow shaft encoder, single channel

SIKIG07-ABX-xx

SIKIG07-ABO-xx

Hollow shaft encoder, dual channel

Hollow shaft encoder, dual channel and zero ref.

SIKIG17-AXX-xx

SIKIG17-ABX-xx

SIKIG17-ABO-xx

Solid shaft encoder, single channel

Solid shaft encoder, dual channel

Solid shaft encoder, dual channel and zero ref.

ACCESSORIES

SIKIG07-M4-xx

SIKIG17-MR01

M4 mounting flange

Measuring wheel

SHAFT ENCODERS - ROTA MAG - MAGNETIC DISK SHAFT ENCODERS

MODEL DESCRIPTION

SIKIG07M-xx Hollow shaft ROTA MAG encoder

SIKIV58M-xx Solid shaft ROTA MAG encoder

SHAFT ENCODERS - ABSOLUTE ANALOGUE ENCODERS

MODEL DESCRIPTION

SIKAV58M-xx Programmable solid shaft, analogue output, multi turn

SIKAH36M-M-xx

SIKAH36M-S-xx

Programmable hollow shaft, analogue output, multi turn

Programmable hollow shaft, analogue output, single turn

SHAFT ENCODERS - ABSOLUTE/PROFIBUS SHAFT ENCODERS

MODEL DESCRIPTION

SIKWK02/1-xx Hollow shaft single turn

SIKWK50/1-xx Hollow shaft multi turn

Page 12

www.siko.de

WWW.INSTROTECH.CO.ZA

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Siko

Magline and Draw Wire Encoders

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

MAGSCALE ELECTRONIC RULER

MODEL DESCRIPTION

SIKMA508/4/3/1-xx Panel mount design, internal and external sensors available, sensor cable

SIKMB500-xx length maximum 2m

Magnetic tape (per meter)

INDUSTRIAL DRAW WIRE TRANSDUCERS

MODEL DESCRIPTION

SIKSGP/1-POT-xx 1000 up to 6000mm potentiometer output

SIKSGP/1-MWI-xx 1000 up to 6000mm 4-20 mA output

SIKSG60-IV58M-xx

SIKSG60-WV58M-xx

1000 up to 6000mm incremental encoder output

1000 up to 6000mm absolute encoder output

SIKSG120-IV58M-xx

SIKSG120-WV58M-xx

3000 up to 12000mm incremental encoder output

3000 up to 12000mm absolute encoder output

Cable Replacement for SGP/1 and SG60

SIKSGP/1-CABLE-xx 1000 up to 6000mm Stainless Cable and Mounting Plate

MINIATURE DRAW WIRE TRANSDUCERS

MODEL DESCRIPTION

SIKSG5-xx 600mm Potentiometer Output

SIKSG5-MWI-xx

SIKSG10-POT-xx

SIKSG10-MWI-xx

600mm 4-20 mA Output

500/1000mm Potentiometer Output

500/1000mm 4-20 mA Output

SIKSG10-IV28M/1-xx 2000mm Incremental Encoder Output

MAGNETIC LENGTH MEASUREMENT - 1mm ACCURACY

MODEL DESCRIPTION

MAGLine Length Measurement, Supply: 24 Vdc

SIKMSK400/1

SIKMB400-xx

Output: P P/AB, Resolution: 1.0mm

Magnetic Sensor

Magnetic Tape (per meter)

MAGNETIC LENGTH MEASUREMENT - 10um ACCURACY

MODEL DESCRIPTION

MAGLine length measurement, supply: 24Vdc / 110Vac / 220Vac

SIKMS100/1

SIKMB100-xx

SIKMA100/2-xx

Resolution: 0.001mm with display

Magnetic sensor

Magnetic tape (per meter)

Display

MAGNETIC LENGTH MEASUREMENT - 50um ACCURACY

MODEL DESCRIPTION

MAGLine length measurement, supply: 5Vdc / 12-30Vdc

Output: PP/TTL/LD/ABI/ABR, r esolution: 0.025mm

SIKMSK210-xx

SIKMB200-xx

Magnetic sensor

Magnetic tape (per meter)

www.siko.de

WWW.INSTROTECH.CO.ZA

Page 13

Siko

Inclinometer

INCLINOMETER

MODEL DESCRIPTION

SIKIK360 Single-axis absolute inclinometer 0° to 360°

Biaxial absolute inclinometer -80° to + 80°

Accuracy : 0.1°

Resolution : 0.01°

IP69K protection, RS-232+U, RS-232+I; CANopen interfaces.

GEARED POTENTIOMETERS - LIGHT DUTY RATIOS 0.25 TO 550:1

MODEL DESCRIPTION

SIKGP03/1-POT-xx Potentiometer output, solid shaft

SIKGP03/1-MWI-xx 4-20 mA output, solid shaft

SIKGP43-POT-xx

SIKGP43-MWI-xx

Potentiometer output with three CAM switches, solid shaft

4-20 mA output with three CAM switches, solid shaft

GEARED POTENTIOMETERS - HEAVY DUTY RATIOS 0.25 TO 550:1

MODEL DESCRIPTION

SIKGP04/1-POT-xx Potentiometer output

SIKGP04/1-MWI-xx 4-20 mA output

SIKGP44-POT-xx

SIKGP44-MWI-xx

Potentiometer output with three CAM switches.

4-20 mA output with three CAM switches

All the above are available in solid and hollow shaft

COMPACT GEARED POTENTIOMETERS - IP52

MODEL DESCRIPTION

SIKGP09-POT-xx Potentiometer output

SIKGP09-MWI-xx 4-20 mA output

All the above are available with optional IP68 protection

POSITION INDICATORS

MODEL DESCRIPTION

SIKDA04-xx High impact polamide housing, hollow shaft, 4 digit display,

SIKDA09S-xx Plastic dust proof housing, hollow shaft, 5 digit display

POSITION INDICATORS - LCD DISPLAY (PC PROGRAMMABLE)

MODEL DESCRIPTION

SIKDE04-xx Plastic housing, hollow shaft, 5 digit LCD display.

SIKDE10-xx

SIKDE-PRO-TOOL

Glass fiber reinforced plastic, hollow shaft, 5 digit LCD display,

Programming software instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

Page 14

WWW.INSTROTECH.CO.ZA

Senix

Ultrasonic Level Transmitters

CORP instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

ANALOGUE POSITION INDICATORS

MODEL DESCRIPTION

SIKS50/1 Scale 51.7mm, reinforced plastic housing either dust-tight, oil-filled or

SIKS70/1

SIKS80/1 waterproof, scale and pointer

Scale 66.8 mm, reinforced plastic housing either dust-tight, oil-filled or waterproof, scale and pointer

Scale 86.8 mm, reinforced plastic housing either dust-tight, oil-filled or waterproof, scale and pointer

SIKS120/1 Scale 124.2 mm, reinforced plastic housing either dust-tight, oil-filled or waterproof, scale and pointer

Scale 86.8 mm, reinforced plastic housing either dust-tight, oil-filled or SIKSZ80/1 waterproof, scale and pointer and 5 decade counter

All the above are available with hand wheels on request

NEW

SIKS70/1

SIKSZ80/1

www.siko.de

ULTRASONIC DISTANCE / LEVEL MEASUREMENT (PC PROGRAMMABLE)

MODEL DESCRIPTION

TSPC Waterproof, dual output, push button teachable and PC configurable

Level/distance transmitter, 15-30Vdc, IP68

TSPC-30S1-xx

TSPC-15S1-xx

TSPC-21S1-xx

SENIXVIEW

SENIXVIEW-USB

Outputs : Programmable mA/V/PNP or NPN awitch/RS-232/RS-485

Serial RS-232 / 485 interface, range : 120mm up to 4m

Serial RS-232 / 485 interface, range : 254 up to 9m

Serial RS-232 / 485 interface, range : 305mm up to 15m

RS-232 programing software kit

USB programing software kit

CHEMICALLY RESISTANT ULTRASONIC LEVEL SWITCH / TRANSMITTER

MODEL DESCRIPTION

LVL Chemically resistant, waterproof, dual ouputs, PC configurable level transmitter

LVL-100-xx

LVL-300-xx

LVL-500-xx

SENIXVIEW

SENIXVIEW-USB

Outputs : Programmable mA / V / PNP or NPN switch / RS-232 / RS-485

Serial RS-232 / 485 interface, max range 3m

Serial RS-232 / 485 interface, max range 6m

Serial RS-232 / 485 interface, max range 10m

RS-232 programing software kit

USB programing software kit

DIGITAL TACHOMETER

MODEL DESCRIPTION

TACH20 Hand held digital tachometer, ideal for beltweigher speed measurement

Measurement of rotational and surface speed in m/min, ft/min and in/min

Measurement of length in m, ft and inch

Display last, maximum and minimum value

Optical (Non-contact) or mechanical measurement

www.senix.com

www.amprobe.de

WWW.INSTROTECH.CO.ZA

Page 15

Calog Instruments

Calibrators and Displays

CALOG

I N S T R U M E N T S

®

mA LOOP CALIBRATOR

MODEL DESCRIPTION

CALOG-LOOP II Measure, source or simulate mA, including Tx Exc

Measure volts and continuity,

datalogging

via SD card and USB port

Comes standard with li-ion batteries, trend display

TEMPERATURE CALIBRATOR

MODEL DESCRIPTION

CALOG-TEMP Measure or source RTD / TC / mV / ohms / mA

Simultaneous mA measure and sourcing of RTD, TC, mV or ohms

Datalogging

via SD card and USB port, includes Tx Exc

Comes standard with li-ion batteries, trend display

LOADCELL CALIBRATORS

MODEL DESCRIPTION

CALOG-LC II Full loadcell tester / simulator / insulation tester (50Vdc)

Measure mA / volts / mV / zero balance, source mA

Comes standard with li-ion batteries

Loadcell Display

for handheld weight indication

Datalogging

via SD card and USB port

PRESSURE CALIBRATOR

MODEL DESCRIPTION

CALOG-PRESS II Pressure calibrator that

includes a pressure Tx

Measure, source or simulate mA, Including Tx Exc

Measure volts and continuity. Trend display, measure pressure using digital transmitter, datalogging via sd card and usb port, comes standard with li-ion batteries

Additional sensors (Keller series PA-33X)

Sensor ranges:

-

1 to 1bar, 0 to 1bar, 0 to 3bar, 0 to 10bar,

0 to 30bar, 0 to 100bar, 0 to 300bar

LOADCELL DISPLAY UNIT

MODEL DESCRIPTION

CALOG-LCDISPLAY Handheld weight indication

Comes standard with li-ion batteries

Datalogging

via SD card and USB port instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Page 16

www.calogsa.com

WWW.INSTROTECH.CO.ZA

Fluke

Calibrators

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

MULTI FUNCTION PROCESS CALIBRATOR

MODEL DESCRIPTION

FLUKE725 Measure V / mA / RTD / TC / frequency,

Source/simulate V / mA / TC / RTD / frequency

Split display for simultaneous measure and source

Includes test leads, test clips and user manual on CD-rom

INTRINSICALLY SAFE MULTI FUNCTION PROCESS CALIBRATOR

MODEL DESCRIPTION

FLUKE725Ex Measure V / mA / RTD / TC / frequency

Source/simulate V / mA / TC / RTD / frequency

Split display for simultaneous measure and source

Includes test leads, test clips and user manual on CD-rom

w ww.

fluke.com

PRESSURE TRANSMITTER - LOW COST

MODEL DESCRIPTION

21Y-xxx Ranges from 1 bar to 1000 bar, includes MPM plug

Output of 4-2 0mA, G1/4” male connection

PRESSURE TRANSMITTER - LOW RANGE

MODEL DESCRIPTION

41X-xxx Ranges from 10 mbar up to 1000 mbar, includes binder plug

Output of 4-20 mA, G1/4” male connection

Gauge pressure or differential pressure

PRESSURE TRANSMITTERS - DIGITAL HIGH ACCURACY

MODEL DESCRIPTION

High accuracy digital and analogue output transmitter,

33X-xxx Ranges from 1 bar up to 300 bar

35X-xxx Outputs of 4-20 mA and RS-485

33x : connection G1/4’ male, 35X : connection G1/4” flush diaphragm

Absolute zero vacuum or gauge pressure versions available

PRESSURE GAUGE - DIGITAL DATA LOGGING

MODEL DESCRIPTION

LEO-RECORD - xxx Digital data logging pressure gauge, connection of G1/4” male

Ranges -1 to 1000 bar

Intrinsically safe version, protective rubber boot and K104-A cable with

Windows programmable software available on request at a charge

Available

PRESSURE GAUGE - DIGITAL WITH SWITCH OUTPUT

MODEL DESCRIPTION dV2-PS - xxx Digital pressure gauge with two switch outputs, connection of G1/4” male

Ranges -1 to 700 bar,

Protective rubber boot and K104-A cable with Windows software available on request at a charge

www.keller-druck.ch

WWW.INSTROTECH.CO.ZA

Page 17

Keller

Pressure Gauges and Transmitters

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

PRESSURE GAUGE - DIGITAL

MODEL DESCRIPTION

LEO2 / 3 - xxx Digital pressure display, connection of G1/4” male

Ranges -1 to 700 bar, accuracy of 0.1%

Intrinsically safe version and protective rubber boot available on request

LEO 3 has a 4-20 mA loop output

Available

SUBMERSIBLE DATA LOGGER / TRANSMITTER

MODEL DESCRIPTION

DCX22- xxx Data logger with cable and software

Ranges 1 bar up to 100 bar

GSM-2- xxx Submersible Data level transmitter, battery powered

Data transmitted via e-mail or SMS

Includes logger, transmitter (36x) and software

PRESSURE TRANSMITTER - SUBMERSIBLE

MODEL DESCRIPTION

26Y- xxx Piezoresistive level transmitter,

5m Cable Standard, alternative lengths available

Ranges 0.2 up to 10 bar

PRESSURE TRANSMITTER - SUBMERSIBLE

MODEL DESCRIPTION

46X- xxx Capacitive low pressure level transmitter

5m Cable Standard, alternative lengths available

Ranges 30 up to 300mbar

Intrinsically safe version available on request

Page 18

DIGITAL DIFFERENTIAL PRESSURE TRANSMITTERS - LOW COST

MODEL DESCRIPTION

PRD33X- xxx High overload resistance and line Pressure output

Pressure Ranges : 0 to 350mbar diff., 40 bar abs.

0 to 1 bar diff., 40bar abs.

0 to 3 bar diff., 40bar abs.

Accuracy: ± 0,05 %FS

Output : RS-485. (High accuracy digital)

www.keller-druck.ch

ELECTRONIC PRESSURE SWITCH / TRANSMITTER

MODEL DESCRIPTION

PDD-xx LED digital display or LED trend display

PDA-xx

Material : Stainless steel

Range : -1 to 400 bar

Output : PNP (NO / NC)

LED digital display or LED trend display

Material : Stainless steel

Range : -1 to 400 bar

Output : 4-20 mA

www.kobold.com

WWW.INSTROTECH.CO.ZA

NEW

Kobold

Pressure Transmitters and Flow Meters

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

DIFFERENTIAL PRESSURE TRANSMITTER

MODEL DESCRIPTION

PAD-xx Material : Stainless steel / monel / tantalum / hastelloy

Range : +0.0075 to 41370 kPa

Connection : 1/4, 1/2 “NPT

Output : 4-20 mA, pulse, HART protocol

MASS FLOW METER - CORIOLIS

MODEL DESCRIPTION

TME/UMC-3 Material : Stainless steel

Range : 0-60 kg/h to 0-60 000 kg/h

Maximum temperature / pressure : 180°C / PN40

Connections : Flange DN10 to 80 / ANSI 1/2" to 3"

Output : Various fieldbus options

TMU/UMC-3 Material : Stainless steel

Range : 0-60 kg/h to 0-2 200 000 kg/h

Maximum temperature / pressure : 260°C / PN40

Connections : Flange DN10 to 300 / ANSI 1/2" to 12"

Output : Various fieldbus options

VARIABLE AREA FLOW METERS

MODEL DESCRIPTION

URK Material : Stainless steel

Range : water : 1 - 10l/h to 15 000 - 50 000l/h

3 3

air : 0.02 - 0.2Nm /h to 50 - 500Nm /h

Maximum temperature / pressure : 100°C / 20bar

Connections : Flange DN15 to 80 / ANSI 1/2" to 3"

Accuracy : Cl. 4 according to VDI

UTS Material : Brass

3

Range : 10 - 100Nl/h to 0.3 - 3Nm /h

Maximum temperature / pressure : 55°C / 3bar

Connections : M18 x 1.5, axial special connection

Accuracy : Cl. 4 according to VDI

ROTAMETERS / FLOW METERS

MODEL DESCRIPTION

KFR-xxx Rotameters for liquid and gases

Range : Water : 5 to 75 l/min

Air : 0.05 up to 6000 l/min

Connections : 1/8” NPT to 1”NPT female thread

KSM-xxx Rotameters for liquid and gases, with optional reed contact outputs

Range : Water : 15 to 760 000 l/h

3

Air : 0.8 up to 2500 m n/Hl/min

Connections : G1/2”, G1 1/4”, G1 ½”, ”G2”, G21/2”,

Screw and glue fittings

NEW

www.kobold.com

WWW.INSTROTECH.CO.ZA

Page 19

Kobold

Flow Meters

VISCOSITY COMPENSATED FLOW METERS

MODEL DESCRIPTION

VKG-xxx Material : Stainless steel / brass

Range : 0.1-0.45 l/min to 5-80 l/min

oil

Maximum temperature / pressure : 100°C / 12 bar

Connections : G1/4” to 1, 1/4 to 1NPT

Output : Reed contact / analogue

CALORIMETRIC FLOW METERS / SWITCHES

MODEL DESCRIPTION

KAL-K-xxx Calorimetric flow meter, output PNP/NPN switch, IP65, plastic housing

KAL-A-xxx

Range : 4 cm/s to 200 cm/s

Calorimetric flow meter, Output 4-20 mA, IP65

Range : 4 cm/s to 200 cm/s

KAL-D-xxx Calorimetric flow meter, output PNP/NPN switch, IP65, stainless steel

Housing,

Range : 0.04 m/s to 2 cm/s

ROTATING VANE FLOW METERS

MODEL DESCRIPTION

DPL-xxx Material : Polypropylene material

Range : 0.02-0.5 to 1-25 l/min

Maximum temperature / pressure : 70°C / 10 bar

Connections : G1/2” male, hose connector

Output: Pulse, 4-20 mA

ROTATING VANE FLOW METERS

MODEL DESCRIPTION

DRG-xxx Material : Polypropylene / aluminum bronze / stainless steel

Range : 0.5-12 to 10-140 l/min

Maximum temperature / pressure : 80°C / 40 bar

Connections : G18”, 1/4”, 12’, 3/4’, 1” female thread

1/8”, 1/4”, ½”3/4”, 1” NPT female thread

Output: Pulse, 4-20 mA, LED display, pointer indication

ROTATING VANE FLOW METERS

MODEL DESCRIPTION

DRB-xxx Material : Aluminium bronze / stainless steel

Range : 5-30 to 50-750 l/min

Maximum temperature / pressure : 80°C / 16 bar

Connections : G1/2” to G3 female thread, ½”NPT to 3” NPT

Output: Pulse, 4-20mA, LED display, contacts

FLOW SWITCH

MODEL DESCRIPTION

PPS-xxx Paddle type flow switch with adjustable paddle

Range 18 - 36 / 72 - 108 l/min water

Connection G1”

Output reed contact (NO/NC)

Page 20

www.kobold.com

WWW.INSTROTECH.CO.ZA

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Kobold

Flow Meters

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

ELECTROMAGNETIC FLOW METER - INSERTION

MODEL DESCRIPTION

PIT-xxx Material : Stainless steel (PTFE or PFA lining)

Range : 0 to 10 m/sec water

Maximum temperature / pressure : 150°C / PN40

Connections : Flange DN40 to 80, ANSI 2" to 3"

Output : Relay / Analogue / Pulse / Digital display

ELECTROMAGNETIC FLOW METER - INLINE

MODEL DESCRIPTION

DMH-xxx Lining material : Hard or soft rubber / wagunit / PTFE

3 3

Range : 0-1 m /hr to 0-10 177 m /hr water

Maximum temperature / pressure : 150°C / PN40

Connections : Flange DN10 to 600, ANSI 1/2" to 24"

Output : Pulse / analogue / status display / totalizer / hart

VORTEX FLOW METER

MODEL DESCRIPTION

DVH-xxx Material : Stainless steel / mild steel / hastelloy

3 3

Range : 3-28 m N/hr to 549-9 034 m N/hr air

3 3

0.2-5 m /hr to 549-9 034 m /hr liquid

Maximum Temperature / Pressure : 400°C / PN64

Flange DN10 to 300 / ANSI 1/2" to 12"

Output : Analogue / contacts / digital display

MODEL DESCRIPTION

DMW-xxx Material : Stainless steel / aluminum

Range : 5-100 mLN/min to 380-7 500LN/min air

Maximum temperature / pressure : 50°C / 10 bar

Connections : G1/4 to 1 female thread

Output : Analogue / digital display / totalizer

MODEL DESCRIPTION

DOG Material : cast steel, steel, stainless steel

DOG-1-xxx

DOG-2-xx

Connections : flange DN25 to 400

Maximum temperature / pressure : 120°C / PN40 bar

Output : Pulse, analogue digital display for flow measurement and counter

Range : 0,2-20 to 160-16.000 m³/h air

Accuracy: +/- 1.5 % of measured value (air)

Range: 0.075-3.75 to 70 - 3500 m³/h water

Accuracy: +/- 0,5 % of measured value ( water)

LEVEL SWITCH

MODEL DESCRIPTION

NKP-xxx Plastic universal level switch, output NO/NC contact

Maximum pressure / temperature : 10bar / 100°C

Connections : G1/2”, ½” M16 NPT

Output : Analogue / contact

NEW

KOBDOG-1

www.kobold.com

WWW.INSTROTECH.CO.ZA

Page 21

Kobold

Flow Meters

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

MASS FLOW METER - THERMAL (FOR COMPRESSED AIR AND GAS)

MODEL DESCRIPTION

KMT-xxx Material : Stainless steel / Ball valve brass

3

Measuring ranges : 0.32-0.65 Nm /h to 78-57840 Nm/h air

Maximum temperature / pressure : 80°C / 16 bar

Connection : G1/2 to G2 with ball valve / 1/2 to 2NPT with ball valve

R1/2 screw-in version for DN65 to DN300

Output : 2 x analogue / switch / pulse programmable

FLOW METER AND COUNTER - FULL METAL VARIABLE AREA

MODEL DESCRIPTION

BGN-xxx Material : Stainless steel

Range : 0.5-5L/h to 13 000-130 000L/h water

3 3

0.015-0.15m /h to 240-2 400m /h air

Maximum temperature / pressure : 350°C / PN40

Connections : Flange DN15 to Dn150 / ANSI 3/4" to 6"

Output : Contact / analogue / totalizer / hart / profibus pa

ATEX certification available

FLOW METERS - OVAL GEAR WHEEL (FOR VISCOUS LIQUIDS)

MODEL DESCRIPTION

DZR-xxx Material : Cast iron / stainless steel

Range : 0.008-2 to 3-700 L/min oil

Maximum temperature / pressure : 150°C / 400bar

Connections : G3/8" to 1" female

Output : Pulse

KZA-xxx Material : Aluminum

Range : 0.02-4 L/min to 1-20 0L/min

Maximum temperature / pressure : 80°C / 160bar

Connections : G1/4" to 1" female thread

Output : Pulse

BYPASS LEVEL INDICATORS

MODEL DESCRIPTION

NBK-xxx Material : Stainless steel

Range : Length : 6 meters max

Maximum temperature / pressure : 100°C / PN16

Connections : Flange DN15 to DN32 / ANSI 1/2" to 1 1/4"

Output : Analogue / contact

Available

MODEL DESCRIPTION

NGM-xxx Material : Aluminium alloy / stainless steel

Measuring length: Max. 20 m

Maximum temperature / pressure : +250°C / +40bar

Connections : Various

Output : 4 - 20mA, switching output PNP

Available

NEW

Page 22

www.kobold.com

WWW.INSTROTECH.CO.ZA

Rototherm

Level Measurement

TM instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

DENSITY / CONCENTRATION TRANSMITTER

MODEL

DENSICHECK

DESCRIPTION

Density/concentration transmitter for inline monitoring.

High accuracy, low maintenance liquid concentration monitoring of acids, solvents and alcohols

Available

NEW

APPLICATIONS

Whisky / brandy distilling

Acid, solvents and

Alcohol concentrations

NON INVASIVE LEVEL TRANSMITTERS

MODEL

VESSELCHECK-ST1

DESCRIPTION

Non-Invasive tank level gauge, (up to 3m)

VESSELCHECK-ST1AD Non-Invasive tank level gauge with ATEX sensor and processor/display

VESSELCHECK-ST2

VESSELCHECK-ST4

SPOTCHECK-1000

(up to 3m)

Non-Invasive tank level measurement system for 2 tanks (up to 25m)

Non-Invasive tank level measurement system for 4 tanks without reference sensor (up to 25m)

Non-Invasive point level detector for tanks and pipes

Available

NEW

VESSELCHECK-ST1AD

CONTROLLER / ANALYSER - BEER ANALYSER FOR % ALCOHOL / °PLATO, CO2 AND O2

MODEL

MULTICHECK

DESCRIPTION

One system measures all, low maintenance

Measuring ranges :0 to 20% alcohol by volume

Plato : 0 to 30° Plato

CO2 : 0 to 20gl; 0 to 10vol/vol CO2

O2 : 4ppb to 25ppm O2

Operating Temperature : 0 to 30°C

Analogue output : 8 x 4-20mA

NEW

OXYGEN IN-LINE MEASUREMENT

MODEL

OXYCHECK

DESCRIPTION

Resolution of 0.1ppb, low maintenance, suitable for stream CIP

Accuracy : level <80ppb accuracy = ±4ppb

Level <1680ppb accuracy = ±16ppb

Level <4000ppb = ±40ppb

Measuring Range : 0 to 25ppm

Repeatability : +/- 0.1ppb

Analogue outputs : 4 - 20mA (current sink) user scaleable

NEW

NON-SAMPLING, IN-LINE CO2 MEASUREMENT

MODEL

CARBOCHECK

DESCRIPTION

Accurate monitoring and control of dissolved CO2 levels in carbonated beverages

Improved “right first time” carbonation figures in-line or in tank

More efficient process control

Reduction in re-work

Accuracy : +/-0.02 vol/vol (+/-0.04 g/l)

NEW

www.ct-uk.co.uk

WWW.INSTROTECH.CO.ZA

Page 23

Optris

Non-contact Thermal Imaging

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

MECHANICAL CHART RECORDER FOR FLOW, PRESSURE & TEMPERATURE

MODEL

CLEARSCAN

DESCRIPTION

1, 2 or 3 pen temperature, pressure & flow recording

Uses proven and reliable Rototherm temperature, pressure and differential pressure systems

Simple installation and maintenance requirements

Wall, panel, portable or pipe mounting available

Fully mechanical versions available

Electrical, battery or mechanical chart drive options

Large 12 inch diameter chart

Large choice of temperature, pressure and differential pressure ranges

www.rototherm.co.uk

OPTRIS FIXED - INFRARED CAMERAS

MODEL

PI160

PI200/PI230

PI400/PI450

DESCRIPTION

160 x 120 pixel IR cameras, 120 Hz, thermal sensitivities from 0.08 - 0.1K

160 x 120 pixel Bi-Spectral camera's, 128Hz,

Thermal sensitivities from 0.08 - 0.1K

382 x 288 pixel IR cameras, 80 Hz, thermal sensitivities from 0.04 - 0.1K

OPTRIS INFRARED THERMOMETERS - COMPACT SERIES

MODEL

CSLT

CSMIRCO

CSMICRO-2W

CSMICRO2W-HS-LT

CSMICRO2W-2M

CT-LT

CT-FAST

CT-HOT

CT-1M/2M

CT-3M

CT-G5

CT-P7

DESCRIPTION

Single piece sensor with smart LED display

Single piece sensor with electronics in cable & smart LED display

Single piece two-wire sensor with electronics in cable

Single piece two-wire sensor with electronics in cable with high thermal sensitivity

Single piece two-wire sensor with electronics in cable for metal applications

Two piece sensor with separate electronic display box

Two piece sensor with fast response time & separate electronic display box

Two piece sensor for hot surrounds, includes separate electronic display box

Two piece sensor for high temp measurement of metal, includes separate electronic display box

Two piece sensor for mid temp measurement of metal, includes separate electronic display box

Two piece sensor measurement of glass, includes separate electronic display box

Two piece sensor measurement of plastic, includes separate electronic display box

OPTRIS INFRARED THERMOMETERS - PORTABLE THERMOMETERS

MODEL

LS

P20-LT

P20-1M/2M/05M

MS-LT

DESCRIPTION

Page 24

www.optris.com

WWW.INSTROTECH.CO.ZA

CT-1M/3M

CS sensor

CT

NEW

NEW

NEW

NEW

Ebro

Temperature Data Loggers

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

OPTRIS INFRARED THERMOMETERS - HIGH PERFORMANCE SERIES

MODEL

CSLASER

CSLASER-2M

CTLASER-LT

CTLASER-LTF

CTLASER-05M

CTLASER-1M/2M

CTLASER-3M

CTXL-3M

CTLASER-G5

CTLASER-P7

CTRATIO

DESCRIPTION

Single piece two-wire sensor with electronics built in

Single piece two-wire sensor for metals with electronics built in

Two piece sensor with separate electronic display box and high optical resolution

Two piece sensor with separate electronic display box, high optical resolution and fast response time

Two piece sensor with separate electronic display box, for measurement of liquid metal

Two piece sensor with separate electronic display box, for high temp measurement of metal

Two piece sensor with separate electronic display box, for mid temp measurement of metal

Two piece sensor with separate electronic display box, for laser applications, high optical resolution

Two piece sensor with separate electronic display box, for measurement of glass, high optical resolution

Two piece sensor with separate electronic display box, for measurement of plastic foils

Ratio pyrometer for high temp with separate electronic display box, glass fiber cable and laser.

NEW

CSLASER-2M

CTLASER-1M/2M

www.optris.com

TEMPERATURE DATA LOGGER

MODEL DESCRIPTION

Data logging for temperate in storageand transport with LCD display

Ranges -30 to 60°C, accuracy ±0.8°C

Memory of 8 000 readings

EBI-20-T Temperature logger with internal sensor

EBI-20-TH

EBI-20-IF

EBI-20-WM

Temperature / Humidity logger with internal sensor

Interface and software

Wall mount bracket

USB TEMPERATURE DATA LOGGER

MODEL DESCRIPTION

Data logging for temperature in cold chain monitoring with automatic PDF

EBI-300

EBI-310

TPC-300

TPX-220

TPX-250

EBI-300WM report generation, direct USB readout and online configuration

Standard USB data logger

High precision USB data logger

External probe for EBI 300 (-35°C to +75°C)

External probe for EBI 310 (-200°C to +250°C)

External probe for EBI 310 (-85°C to +50°C)

Wall mount for EBI 300 / 310

www.ebro.de

WWW.INSTROTECH.CO.ZA

Page 25

Michell

Humidity / Temperature Sensors

HUMIDITY / TEMPERATURE HANDHELD METER

MODEL DESCRIPTION

MDM25-xxx Digital handheld temperature / humidity meter with various probes

MDM25-FPR

MDM25-SPR

Fixed probe

Standard probe

MDM25-SWPR

MDM-HTPR300

MDM-HTPR500

Sword type probe

300mm remote high temperature probe

500mm remote high temperature probe

HUMIDITY / TEMPERATURE SENSORS

MODEL DESCRIPTION

WM-522-xx Mini wall-mounted transmitter

WM-523-xxx

Output 1 : 4-20 mA = 0 - 100 %RH

Output 2 : 4-20 mA = 0 - 100°C

Mini wall-mounted transmitter with LCD display

DT722-xxx

DT722-xxx

Output 1 : 0-10 Vdc = 0 - 100 % RH

Output 2 : 0-10 Vdc = 0-100°C

Rugged industrial transmitter with a probe

Output 1 : 4-20 mA = 0 - 100%RH

Output 2 : 4-20 mA = 0 - 100°C

Rugged industrial transmitter with LCD display and a probe

Output 1 : 4-20 mA = 0 - 100 %RH

Output 2 : 4-20 mA = 0 - 100°C

www.michell.com/uk

PNEUMATIC / HYDRAULIC HAND PUMPS - PRESSURE CALIBRATION

MODEL DESCRIPTION

2911 Pneumatic pressure hand pump

2941

Range of 0 to 7 bar

Pneumatic vacuum hand pump

Range of -850 mbar to 0 bar

LPP30 Pneumatic scissor grip hand pump, source pressure and vacuum

Range of -850 mbar to 35 bar

LPP700 Hydraulic scissor grip hand pump, source pressure

Range of 0 to 700 bar

LPP60-T Calibration pneumatic test pump (Desk mount)

Range of 0 to 60 bar

All hand pumps supplied with carry case

DEAD WEIGHT TESTERS

MODEL DESCRIPTION

CPB5000-xxx Hydraulic dead weight tester, single piston

Ranges from 60 bar to 1000 bar

Stainless steel weight set in wooden carry case

Digital pressure displays optional

Page 26

PRESSURE COMPARATOR

MODEL DESCRIPTION

LSP-xxx Hydraulic pressure comparator

Ranges from 100 bar to 1600 bar

Digital pressure displays optional

www.druck-temperatur.de

WWW.INSTROTECH.CO.ZA

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

Leitenberger

Temperature Calibrators

PORTABLE TEMPERATURE CALIBRATORS

MODEL DESCRIPTION

PYROS-125 Low cost dry block calibrator

Temperature range: -24 to +125°C

Execution:

dry block

Stability: ±0.05

Temperature units: °C / °F

PYROS-375

PYROS-650

QUARTZ

PULSAR-35Cu

PULSAR-80Cu

SOLAR

FLUID100

FLUID200

Low cost dry block calibrator

Temperature range: +30 to +375°C

Execution:

dry block

Stability: ±0.15

Temperature units: °C / °F

Low cost dry block calibrator

Temperature range: +35 to +650°C

Execution:

dry block

Stability: ±0.3

Temperature units: °C / °F

High accuracy day block calibrator

Temperature range: -30 to +150

Execution:

dry block

Stability: ±0.03 (@ 0°C)

Temperature units: °C / °F / K

High accuracy dry block calibrator

Temperature range: +20 to +600

Execution:

dry block

Stability: ±0.05 (@ 450°C)

Temperature units: °C / °F / K

High accuracy dry block calibrator

Temperature range: +20 to +550

Execution:

dry block

Stability: ±0.05 (@ 450°C)

Temperature units: °C / °F / K

High temperature range dry block calibrator

Temperature range: +200 to +1100

Execution:

dry block

Stability: ±0.3 (@ 1000°C)

Temperature units: °C / °F / K

High accuracy temperature bath

Temperature range: -12 to +125

Execution:

fluid bath

Stability: ±0.02 (@ -5°C)

Temperature units: °C / °F / K

High accuracy temperature bath

Temperature ran ge: Ambient to +200

Execution:

fluid bath

Stability: ±0.02 (@ 150°C)

Temperature units: °C / °F / K instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

Pyros

Solar

Pulsar

Fluid

www.druck-temperatur.de

WWW.INSTROTECH.CO.ZA

Page 27

Monitran

Accelerometer

AC OUTPUT ACCELEROMETER

MODEL DESCRIPTION

MTN1100C-xxx AC output accelerometer, includes M8 quick fit stud

Sensitivity 100 mV/g

Cable : 5 meters standard

Submersible and Intrinsically safe versions avaliable

DC OUTPUT ACCELEROMETER

MODEL DESCRIPTION

MTN1185C-xxx 4-20mA dc output accelerometer, includes M8 quick fit stud

Ranges : 10 mm/s up to 100 mm/s

Cable : 5 meters standard

Intrinsically safe versions avaliable

PORTABLE VIBRATION METER

MODEL DESCRIPTION

MTNVM220 Hand held acceleration / velocity / displacement meter

Acceleration: 20g

Velocity: 200mm/s

Displacement: 2000µm

Modes: RMS, peak, peak-peak, crest factor, bearing acceleration, bearing velocity

www.monitran.co.uk

INDUCTIVE PROXIMITY SWITCHES

MODEL DESCRIPTION

BO1 / BO3-xxx Suitable for limit / speed switches

Connection of cable or plug

Outputs : PNP, NPN, NO/NC and AC Switches

Diameter : 8 / 10 / 12 / 18 / 28 / 50 mm

Ranges : 2 / 3 / 4 / 8 / 15 / 35 / 50 mm

ANALOGUE OUTPUT PROXIMITIES

MODEL DESCRIPTION

B50-xx Suitable for Distance Measurement

Connection : Plug

Outputs : 0-10 Vdc or 4-20 mA

Diameter : 12 / 18 / 30 / 80 x 80 mm

Ranges : 4 / 8 / 10 / 60 mm

CAPACITIVE PROXIMITY SWITCHES

MODEL DESCRIPTION

K01-xxx Cylindrical and block mount switches

Connection : Plug / cable

Outputs : PNP / NPN / NO / NC switches

Diameters : 18 / 22 / 30 / 32 / 50 mm

Ranges : 2-70 mm

Page 28

www.selet.it

WWW.INSTROTECH.CO.ZA

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

NEW

Selet

Proximity Switches

PHOTO-ELECTRIC SWITCHES / BEAMS

MODEL DESCRIPTION

OCV87D-xxx Direct Switches

Ranges / diameter : 0-1 m / 30 mm

Connection : Cable

Outputs : PNP / NPN / NO / NC switches

OCV87C-xxx

OCV81-xxx

Reflective Switches

Ranges / diameter : 0-5 m / 30 mm

Connection : Cable

Outputs : PNP / NPN / NO / NC switches

Beam Switches

Ranges / diameter : 0-15 m / 18 mm

Connection : Cable

Outputs : PNP / NPN / NO / NC switches

LINEAR AND PRECISION POTENTIOMETERS (HEAVY DUTY)

MODEL DESCRIPTION

H28-xxx Linear potentiometers, heavy duty IP55 (Optional IP64)

Linearity = 0.1%

Ranges : 0 to 1000 mm

LINEAR AND PRECISION POTENTIOMETERS (LIGHT DUTY)

MODEL DESCRIPTION

P12-xxx Linear potentiometers, light duty, IP55

Linearity = 0.5%

Ranges : 0 - 300 mm

LINEAR AND PRECISION POTENTIOMETERS

MODEL DESCRIPTION

H20-xxx Linear potentiometers, short stroke, miniature

Linearity =1%

Ranges : 10 mm (1K)

STEAM LEAK DETECTION SYSTEMS FOR POWER STATION BOILERS

MODEL DESCRIPTION

FFT-16 Inspecta FFT16-point system

FFT-32

FFT-HA-3

FFT-MC

FFT-PVC

Inspecta FFT32-point system

Inspecta sensor and head amplifier with housing

Inspecta sensor capsule assemble

Inspecta pipework Sets, PVC and valve instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

BEAM

www.selet.it

www.mcbindustrie.com

www.inspectasld.com

WWW.INSTROTECH.CO.ZA

Page 29

Instrotech

Thermocouples and RTD’s instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

MINERAL INSULATED AND GENERAL PURPOSE THERMOCOUPLES AND RTD’S

MODEL DESCRIPTION

TC Type : K, J, T, E, N, R, S, B

Diameters : 1 / 1.5 / 3 / 3.2 / 4 / 4.5 / 4.8 / 6 / 6.35 / 8 /

9.5 / 10.8 / 12.7 mm

Sheath types : Stainless Steel 310, 311, 316, 446 /

Inconel 600, 601 / Nimonic / Nicrobell

RTD Types : Pt100 / 150 / 500 / 1000 or Ni100

Diameters : 3 / 4.8 / 6 / 6.35 / 8 / 9.5 / 10 / 12 / 12.7 mm

Lengths : 10 mm to 30 000 mm (depending on Diameter

Terminal Heads : Die cast aluminum, stainless steel, polypropylene, nylon, cast iron

Terminations : Potting adaptors to standard / custom dimensions, various flylead types

Flylead insulation types : PVC / Teflon / Silicon / Glass

or mineral fibre, all with optional SS overbraid

THERMOWELLS

MODEL DESCRIPTION

TW-xxx Types : Solid drilled screwed and flanged, fabricated cold closed threaded and flanged

Diameters : from 6 to 80 mm

Lengths : 10 to 1400 mm solid drilled , up to 6 m fabricated

Materials : Stainless steel 304, 316, 310, 321, 446,

253ma, 353ma, 904 / Sanicro 28 / Inconel 600,

601, 800HT, 825 / Titanium / Teflon instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Page 30

WWW.INSTROTECH.CO.ZA

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

Product Warranty

Each Instrotech product is warranted to be free from defects in material and workmanship under normal use and service, for two years. The warranty period starts on the day of shipment and extends only to the original buyer or end-user customer of a

Instrotech authorized reseller. The warranty does not apply to any disposable batteries or fuses. The warranty does not apply to any product, which, in Instrotech’s opinion, has been misused, neglected, altered or damaged by accident or by abnormal conditions of operation or handling. Instrotech warrants that the software will operate in accordance with its functional specifications for three months and that it has been properly recorded on nondefective media. Instrotech does not warrant that the software will be error free or operate without any interruption.

The warranty is not transferable and covers only the original purchaser. To establish original ownership and proof of the date of purchase, please complete and return the registration card accompanying the product.

Service

Instrotech will, at its discretion, repair at no charge, replace or refund the purchase price of a defective product purchased through an Instrotech authorized sales outlet and at the applicable international price. Instrotech reserves the right to charge for the importation costs of repair and/or replacement parts if the product purchased in one country is sent for repair elsewhere.

Send the defective product with a description of the problem to the nearest Instrotech authorized reseller or service centre, postage and insurance prepaid. Instrotech will pay for the return transportation of the product repaired or replaced under warranty.

Before making any non-warranty repair, Instrotech will provide an estimate of the cost and obtain authorization, then invoice you for the repair and return transportation.

THIS WARRANTY ONLY COVERS THE REASONS DETAILED ABOVE. NO OTHER WARRANTIES, SUCH AS SUITABILITY

FOR A PARTICULAR PURPOSE, ARE STATED OR IMPLIED. INSTROTECH IS NOT LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE

OR THEORY.

AUTHORIZED INSTROTECH RESELLERS ARE NOT AUTHORIZED TO CHANGE OR OFFER ANY DIFFERENT WARRANTY

ON INSTROTECH’S BEHALF.

WWW.INSTROTECH.CO.ZA

Page 31

instrotech

INSTRUMENTATION AND PROCESS CONTROL

A Comtest Group Company

8 Enterprise Close, Linbro Park

Gauteng, 2090, South Africa

PO Box 1208, Linbro Park, 2066

Tel : +27 (0) 11 462 1920

Fax : +27 (0) 11 462 1958

WWW.INSTROTECH.CO.ZA

Contact your local distributor

The manufactures’ reserves the right to change or revise the specifications without prior notice.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement