advertisement
User Manual
T
ABLE OF
C
ONTENTS
1. Before You Begin................................................................................3
What Is Included ........................................................................................... 3
Unpacking Instructions .................................................................................. 3
Claims ................................................................................................................... 3
Text Conventions .......................................................................................... 3
Symbols ........................................................................................................ 3
Disclaimer ..................................................................................................... 3
Product at a Glance ....................................................................................... 4
Safety Notes ................................................................................................. 4
2. Introduction.........................................................................................5
Product Overview .......................................................................................... 5
Product Dimensions ...................................................................................... 6
3. Setup ...................................................................................................7
AC Power ...................................................................................................... 7
Fuse Replacement ................................................................................................. 7
Power Linking ........................................................................................................ 7
Mounting ....................................................................................................... 8
Orientation ............................................................................................................. 8
Rigging .................................................................................................................. 8
4. Operation ............................................................................................9
Control Panel Operation ................................................................................ 9
Menu Map ..................................................................................................... 9
Configuration (DMX) .................................................................................... 10
Starting Address .................................................................................................. 10
DMX Personalities................................................................................................ 10
DMX Channel Assignments and Values....................................................... 11
13-CH .................................................................................................................. 11
DMX Channel Assignments and Values (cont.) ............................................ 12
8-CH .................................................................................................................... 13
DMX Channel Assignments and Values (cont.) ............................................ 13
Configuration (Standalone) .......................................................................... 14
Sound-Active Mode .............................................................................................. 14
Automatic Mode ................................................................................................... 14
Manual Pan/Tilt Operation .................................................................................... 14
Pan/Tilt Angle Restrict .......................................................................................... 14
Display Orientation ............................................................................................... 15
Master/Slave Mode .............................................................................................. 15
Reset Software .................................................................................................... 15
Password Channel ............................................................................................... 16
Changing Gobos ......................................................................................... 17
5. Technical Information ......................................................................18
Product Maintenance .................................................................................. 18
Contact Us .................................................................................................. 19
Returns ....................................................................................................... 19
6. Technical Specifications ..................................................................20
Page 2 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
1.
B
EFORE
Y
OU
B
EGIN
What Is
Included
• Intimidator™ Spot LED 250
• Power Cord
• Warranty Card
• Quick Reference Guide
Unpacking
Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Text
Conventions
Convention
1~512
50/60
Meaning
A range of values
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
A value to be entered or selected
ON
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Not following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
Disclaimer
The information and specifications contained in this document are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or omissions. CHAUVET® reserves the right to revise this manual or create a new one to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com
.
© Copyright 2013 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the U.S.A.
Author Date Editor Updated
A. Diaz 5/1/12 S. Diaz 2/15/13
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 3 of 20
Product at a
Glance
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
Safety Notes
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
• This product is not intended for permanent installation.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from power before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.
• The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Contact the nearest authorized technical assistance center.
• Keep this User Manual for future consultation. If you sell the product to another user, be sure that they also receive this document.
Page 4 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
2.
I
NTRODUCTION
Product Overview
Control Panel and
Button Menu
Power In
Power Out
Fuse Holder
Intimidator™ Spot LED 250 User Manual (Rev. 8)
Cooling Fan
DMX Out
DMX In
Page 5 of 20
Product Dimensions
Page 6 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
3.
S
ETUP
AC Power
The Intimidator™ Spot LED 250 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Fuse
Replacement
Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
1. Using a flat-head screwdriver, unscrew the fuse holder from the back of the product.
2. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
3. Insert the fuse holder back in place, re-tighten, and reconnect power.
Disconnect the product from power before replacing the fuse.
Power Linking
Power Linking
Diagram
The product provides power linking via the Edison outlet located in the back of the unit.
Please see the diagram below for further explanation.
1 st
Product
2 nd
Product
3 rd
Product
Other products
You can power link up to 6 Intimidator™ Spot LED 250 units on 120 VAC or up to
11 Intimidator™ Spot LED 250 units on 230 VAC.
The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET® distributor as power linking connectors and requirements may differ in your country or region.
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 7 of 20
Mounting
Before mounting the product, read and follow the Safety Notes .
Orientation
The Intimidator™ Spot LED 250 may be mounted in any position; however, make sure adequate ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes.
Mounting Diagram
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. See the Technical Specifications .
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a 13-mm hole, which is appropriate for this purpose.
• When power linking multiple products, you must always consider the length of the power linking cable and mount the products close enough for the cable to reach.
• The rubber feet also serve as floor supports. When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
Bracket
Attachment (x2)
Rubber Feet (x4)
Safety Loop
Attachment Point
Page 8 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
4.
O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
Button
Function
<UP>
<DOWN>
<ENTER>
Menu Map
Mode
DMX Mode
Operation
Modes
Pan
Tilt
Display
Channel Mode
Manual Pan
Restrict
Manual Tilt
Restrict
Reset
Load
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
Programming Steps
001-512
SLAv (Son)
NASL (SLoU)
NAFA (FASt)
NStS (SrUn)
Normal Pan PAn
Inverse Pan r PAn tiL r tiL
Normal Tilt
Inverse Tilt
Normal
Display
Inverse
Display
13-Channel
Mode
8-Channel
Mode
Pan 540 diS r diS
13CH
8CH
PA54
Pan 360
Pan 180
Tilt 270
Tilt 180
Tilt 90 rESt
LoAd
PA36
PA18
Ti27
Ti18
Ti 9
Description
Sets the DMX starting address
Slave operating mode
Automatic Mode, Slow Program
Automatic Mode, Fast Program
Sound-Active Mode
Normal Pan operation
Inverse Pan operation
Normal Tilt operation
Inverse Tilt operation
Change the LCD display text position
Selects the DMX personality
Select Pan angle restrictions
Select Tilt angle restrictions
Resets fixture
Load factory defaults
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 9 of 20
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
The Intimidator™ Spot LED 250 uses up to 13 DMX channels in its 13-channel DMX mode, which defines the highest configurable address to
500.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press <MODE/ESC> repeatedly until 001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
DMX
Personalities
The Intimidator™ Spot LED 250 has two DMX personalities, an 8-channel personality and a 13-channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press
<MODE/ESC> repeatedly until either 13CH (to choose the 13-channel personality) or 8CH (to choose the 8-channel personality) shows on the display.
2. Press <ENTER>.
Page 10 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
DMX Channel Assignments and Values
13-CH
Channel
1
2
3
4
5
Function
Pan
Fine Pan
Tilt
Fine Tilt
Speed
6 Color Wheel
Value Setting
000 255 0~540°
000 255 Fine control of panning
000 255 0~270°
000 255 Fine control of tilting
000 255 Pan/Tilt speed (fast to slow)
000 006 White
007 013 Yellow
014 020 Pink
021 027 Green
028 034 Red
035 041 Light Blue
042 048 Kelly Green
049 055 Orange
056 064 Dark Blue
065 071 White + Yellow
072 078 Yellow + Pink
079 085 Pink + Green
086 092 Green + Red
093 099 Red + Light Blue
100 106 Light Blue + Kelly Green
107 113 Kelly Green + Orange
114 120 Orange + Dark Blue
121 127 Dark Blue + White
128 191 Color cycling rainbow with increasing speed
7 Gobo Wheel
064 071 Gobo 7 shake, from slow to fast
072 079 Gobo 6 shake, from slow to fast
080 087 Gobo 5 shake, from slow to fast
088 095 Gobo 4 shake, from slow to fast
096 103 Gobo 3 shake, from slow to fast
104 111 Gobo 2 shake, from slow to fast
112 119 Gobo 1 shake, from slow to fast
120 127 Open
128 191 Cycle effect with increasing speed
192 255 Reverse cycle effect with increasing speed
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 11 of 20
DMX Channel Assignments and Values (cont.)
13-CH (cont.)
Channel Function Value Setting
000 063 Slow to fast
8
9
10
11
Gobo Rotation
Prism
Dimmer
Shutter
064 147 Rotation effect with increasing speed
148 231 Reverse rotation effect with increasing speed
232 255 Gobo bounce
000 015 Open
016 255 Prism on
000 255 0~100%
000 003 Closed
004 007 Open
008 215 Strobe effect with increasing speed
216 255 Open
000 007 No function
008 027 Blackout while pan/tilt moving
028 047 Blackout while moving gobo wheel
048 067 Disable blackout while pan/tilt/moving gobo wheel
068 087 Blackout while moving color wheel
088 107 Disable blackout while pan/tilt/moving color wheel
108 127 Disable blackout while moving gobo/color wheel
12 Control Functions
13 Movement Macros
148 157 Reset pan
158 167 Reset tilt
168 177 Reset color wheel
178 187 Reset gobo wheel
188 197 Reset prism
198 207 Reset all channels
208 255 No function
000 007 No function
008 023 Movement macro 1
024 039 Movement macro 2
040 055 Movement macro 3
056 071 Movement macro 4
072 087 Movement macro 5
088 103 Movement macro 6
104 119 Movement macro 7
120 135 Movement macro 8
136 151 Sound-controlled program 1
152 167 Sound-controlled program 2
168 183 Sound-controlled program 3
184 199 Sound-controlled program 4
200 215 Sound-controlled program 5
216 231 Sound-controlled program 6
232 247 Sound-controlled program 7
248 255 Sound-controlled program 8
Page 12 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
DMX Channel Assignments and Values (cont.)
8-CH
Channel
1
2
Pan
Tilt
3
Function
Color Wheel
Value Setting
000 255 0~540°
000 255 0~270°
000 006 White
007 013 Yellow
014 020 Pink
021 027 Green
028 034 Red
035 041 Light Blue
042 048 Kelly Green
049 055 Orange
056 064 Dark Blue
065 071 White + Yellow
072 078 Yellow + Pink
079 085 Pink + Green
086 092 Green + Red
093 099 Red + Light Blue
100 106 Light Blue + Kelly Green
107 113 Kelly Green + Orange
114 120 Orange + Dark Blue
121 127 Dark Blue + White
128 191 Color cycling rainbow with increasing speed
4
5
Gobo Wheel
Gobo Rotation
6
7
8
Prism
Dimmer
Shutter
Intimidator™ Spot LED 250 User Manual (Rev. 8)
064 071 Gobo 7 shake, from slow to fast
072 079 Gobo 6 shake, from slow to fast
080 087 Gobo 5 shake, from slow to fast
088 095 Gobo 4 shake, from slow to fast
096 103 Gobo 3 shake, from slow to fast
104 111 Gobo 2 shake, from slow to fast
112 119 Gobo 1 shake, from slow to fast
120 127 Open
128 191 Cycle effect with increasing speed
192 255 Reverse cycle effect with increasing speed
000 063 Slow to fast
064 147 Rotation effect with increasing speed
148 231 Reverse rotation effect with increasing speed
232 255 Gobo bounce
000 015 Open
016 255 Prism on
000 255 0~100%
000 003 Closed
004 007 Open
008 215 Strobe effect with increasing speed
216 255 Open
Page 13 of 20
Configuration
(Standalone)
Sound-Active
Mode
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (either Static,
Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
To enable the Sound-Active mode, do the following:
1. Press <MODE/ESC> repeatedly until one of the following shows on the display:
NASl, NAFA, NStS, SLAv.
2. Press <UP> or <DOWN> to select NStS.
3. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press
<MODE/ESC> repeatedly until one of the following shows on the display:
NASl, NAFA, NStS, SLAv
2. Press <UP> or <DOWN> to select NASl (for a slow light show) or NAFA (for a fast light show).
3. Press <ENTER>.
Manual Pan/Tilt
Operation
To select whether you want the Intimidator™ Spot LED 250 to operate with normal panning or inverted panning, do the following:
1. Press <MODE/ESC> repeatedly until PAn shows on the display.
2. Press <UP> or <DOWN> to select normal pan operation (PAn) or inverse pan operation (
r PAn).
3. Press <ENTER>.
To select whether you want the Intimidator™ Spot LED 250 to operate with normal tilting or inverted tilting, do the following:
1. Press <MODE/ESC> repeatedly until tiL shows on the display.
2. Press <UP> or <DOWN> to select normal pan operation (tiL) or inverse pan operation ( r tiL).
3. Press <ENTER>.
Pan/Tilt Angle
Restrict
You are able to restrict the pan and tilt angles on the Intimidator™ Spot LED 250 to achieve the effect you like.
To select which pan angle to use, do the following:
1. Press <MODE/ESC> repeatedly until PA54 shows on the display.
2. Press <UP> or <DOWN> to select either 540° (PA54), 360° (PA36) or 180° (PA18).
3. Press
<ENTER>.
To select which tilt angle to use, do the following:
1. Press <MODE/ESC> repeatedly until Ti27 shows on the display.
2. Press <UP> or <DOWN> to select either 270° (Ti27), 180° (Ti18) or 90° (Ti 9).
3. Press <ENTER>.
Page 14 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
Display
Orientation
You are able to flip the LED display for easy readability in any mounting situation.
To select your display angle:
1. Press <MODE/ESC> repeatedly until diS shows on the display.
2. Press <UP> or <DOWN> to select normal display mode (diS) or inverse display mode ( r diS).
3. Press <ENTER>.
Master/Slave
Mode
The Master/Slave mode allows a single Intimidator™ Spot LED 250 unit (the “master”) to control the actions of one or more Intimidator™ Spot LED 250 units (the “slaves”) without the need of a DMX controller. The master unit will be set to operate in either
Automatic or Sound-Active mode, while the slave units will be set to operate in Slave
Mode. Once set and connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MODE/ESC> repeatedly until SLAv shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound mode.
2. Make the master unit the first unit in the DMX daisy chain.
•
Configure all the slave units before connecting the master unit to the DMX daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master unit.
•
Do not connect more than 31 slave units to the master unit.
Reset Software
To reset the software on the Intimidator™ Spot LED 250, do the following:
1. Press <MODE/ESC> repeatedly until rESt shows on the display.
2. Press <ENTER>. The product will reset all settings in the software to the default factory settings.
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 15 of 20
Password
Channel
The Intimidator™ Spot LED 250 contains a password-protected mode which allows you to calibrate and troubleshoot any small issues you may have during normal operation.
In order to access this mode, do the following:
1. Press and hold <MODE/ESC> for at least 10 seconds.
2. Use the <UP> and <DOWN> buttons to enter the password: 2323.
3. Press <ENTER>.
In this mode you have several options for adjustment.
Parameter
Pan Adjust
Tilt Adjust
Gobo Wheel Adjust
Color Wheel Adjust
Prism Adjust
Lamp Brightness Adjust
Pan Switch Strength
Tilt Switch Strength
Programming Steps Description
P128
Manually adjust the pan angle
t128
G128
Manually adjust the tilt angle
Manually adjust the gobo wheel
C128
Manually adjust the color wheel
L128 d000
Manually adjust the prism
Manually adjust the starting brightness of the lamp
P--0 t--0
Adjust the strength of pan switch
Adjust the strength of tilt switch
Page 16 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
Changing
Gobos
To change the gobos in the Intimidator™ Spot LED 250, you do not need to remove the gobo wheel. Simply:
1. Turn off and disconnect product from power outlet.
2. Place the product on a flat, level surface with the front facing up.
3. Open the gobo-access plate by pushing it in the direction of the arrow.
4. Rotate the gobo wheel until the gobo that needs replacing is accessible.
5. Separate the gobo holder assembly away from the gobo wheel by pushing it forward and up. Be careful not to push the gobo out of the gobo plate.
6. Extract the gobo holder by pulling it backwards out of the product.
7. On a flat surface, remove the expansion ring that holds the gobo in place and remove the gobo from the gobo plate.
8. Insert a new gobo and hold it in place with the expansion ring.
9. To re-insert the new gobos, slide the tip of the gobo holder under the pressure plate near the center of the gobo wheel.
10. Push the gobo holder assembly inwards. DO NOT force the gobo holder into the gobo wheel slot. Slightly move the holder from side-to-side if needed to get it to seat properly. If correctly installed, the bottom of the holder will be flush with the gobo wheel.
11. Push cover back into position.
Gobo Replacement Diagram
Gobo Holder Removal
Expansion Ring
Gobo Wheel Detail Views
Gobo Holder Assembly
Gobo
Easy-access Panel
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 17 of 20
5.
T
ECHNICAL
I
NFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life. To maintain optimum performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions may lead to more frequent cleaning.
To clean the product, follow the instructions below:
• Unplug the product from power.
• Wait until the product is cold.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
• Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Softly drag any dirt or grime to the outside edges of the glass/transparent surface.
• Gently polish the glass/transparent surfaces until they are free of haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.
Page 18 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
Contact Us
In case you need to return a product or request support, follow the procedure below:
• If you live in the U.S., contact CHAUVET® World Headquarters.
• If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.
• If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your dealer. See the respective website for dealers’ contact details.
World Headquarters
CHAUVET®
General Information
Address:
Voice:
Fax:
Toll free:
5200 NW 108th Avenue
Sunrise, FL 33351
(954) 929-1115
(954) 929-5560
(800) 762-1084
Technical Support
Voice:
Fax:
Email:
(954) 929-1115 (Press 4)
(954) 756-8015 [email protected]
World Wide Web
www.chauvetlighting.com
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Voice:
Fax:
Pinxton, Nottingham, UK
NG16 6NT
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
Email: [email protected]
World Wide Web
www.chauvetlighting.co.uk
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of record and follow their instructions on how to return CHAUVET® products to them. Visit our website for contact details.
Returns
Call the corresponding CHAUVET® Tech Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return.
You must send the merchandise prepaid, in its original box, and with its original packing and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s).
Intimidator™ Spot LED 250 User Manual (Rev. 8) Page 19 of 20
6.
T
ECHNICAL
S
PECIFICATIONS
Dimensions and
Weight
Power
Length
9.3 in (236 mm)
Width
8.1 in (205 mm)
Height
11.3 in (287 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type
Switching (internal)
Range
100~240 V, 50/60 Hz
Parameter
Consumption
Operating
120 V, 60 Hz
150 W
1.3 A
Light Source
Photo Optic
Power linking units
Fuse
Power I/O
Power input connector
Power output connector
Power Cord plug
Type
LED
Color
White
Parameter
Illuminance @ 2 m
Beam angle
Strobe Rate
Pan & Tilt
Thermal
DMX
Ordering
Pan/Tilt Ranges
Gobo Size
Maximum External Temp.
104° F (40° C)
I/O Connectors
3-pin XLR
Product Name
Intimidator™ Spot LED 250
6 units
F 2 A, 250 V
US/Worldwide
IEC
Edison
Edison (US)
Power
40 W (14.4 A)
Quantity
1
5,970 lx
17º
0-20 Hz
540°
540°, 360°, 180°
Pan
24 mm outside
20 mm image
1.1 mm thickness
Cooling System
Convection
Connector Type
Sockets
Item Code
08010462
Weight
12.6 lbs (5.7 kg)
Voltage Selection
Auto-ranging
230 V, 50 Hz
157 W
0.7 A
11 units
F 2 A, 250 V
UK/Europe
IEC
IEC
Local plug
Lifespan
50,000 hours
Current
350 mA
270°
270°, 180°, 90°
Tilt
Channel Range
8, 13
Item Number
INTSPOTLED250
Page 20 of 20 Intimidator™ Spot LED 250 User Manual (Rev. 8)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project