CONTACT THERMOREGULATOR
The TS53 is a Water temperature thermoregulator
designed for surface mounting on water pipes (1955318)
or domestic hot water cylinders (155328),
It is particularly suitable for the water temperature
regulation in civil and industrial thermic installations.
Dimensions
A
cable-aland
68 A?
VA =~ О — |
8] ©
~ 6—— 0
1 | [8 1553 )
3} —
1553
Technical and electric features
Control range : 17° + 98°C
Breaking capacity: C-1 16(2.5)A/258U~
C-2 3(1)A/250U~
Minimun current: 208 mA
Cable fastening by terminal board
Protection level: IP 48
Differential: approx.10" C
Internal Ty53 bimetallic thermoregulator VDE/UL
approved.
Weight: 128 gr.
The thermostat is a class II (double insulated
device) requiring no earth connection.
Version 155310
Suitable for surface mounting on water pipe by
means of a spring clip (fig.1).
# min. pipe
# max. pipe
2/mm -- 3/4'
115mm -- 4'
spring clip
Version 155328
Suitable for surface on domestic hot water cylinder
by means of a spring wire (Fig.2).
Fixing instructions:
Determine the correct length of the spring wire and cut
it if necessary to ensure it is under slight tension.
Fit the two hooks on the ends of the spring wire.
Wire the thermostat: this operation should be carried
out by a competent electrician in accordance with
the appropriate IEE wiring regulations (fig.4).
Mount the thermostat on the hot water cylinder as shown
in fig.2 and fit it under the spring wire ensuring
that the wire fits in the appropriate slot on the
cover (fig.3).
Local mounting strap
Spring wire / Spring wire
Lors)
> Insulation
AY
87
F1q.2 Hot water cylinder
Fig.3
Wiring terminals
о
о
No
U
Termoregolatori Campini Corel S.p.A.
Producer: CAMPINI 22066 Mariano Comense - Como - Italy
COREL Via Don Guanella, 1
] ® Regulus spol. $ г.о. Czech Republic
tog Do koutú 1897/3, 143 00 Praha 4
Distributor: fesu us Tel.: ++420 241 765 191 Fax: ++420 241 763 976 C €
e-mail: [email protected], www.regulus.eu
">
