Regulus Manual Filling Pump Product sheetAdd to my manuals
MANUAL FILLING AND TOP UP PUMP
suitable for smaller solar thermal systems. It may stay installed in a system for solar ﬂuid top-up when needed. It can be also used for ﬁlling heating systems with cleaning and protective solutions.
Pump alone with hose sockets
Code – 15111
Pump with container and connection ﬁttings
Code – 15054
This pump is moreover ﬁtted with a 600ml ﬂuid container and a 3/4” MFU connecting union on the discharge side.
Suction side Hose socket
ELECTRIC FILLING AND TOP UP PUMP
featuring reliable low-noise piston pump that is easy to use. It connects directly to a 25l plastic container ﬁtted with a DIN 61 thread. A thermocouple is integrated in the pump, protecting it against overheating and permanent damage.
All the components that get in touch with ﬂuid are made of stainless steel or plastic.
Code – 9688
Hose socket, 1/2“
Air vent valve with 2m suction hose to connect to a pump (“A”) and ﬁlling valve (“B”)
Return hose socket
Screw container cap with
DIN 61 thread
T E C H N I C A L D ATA
Power supply cable
Connection discharge side suction side
Suction hose length
230 V ~ 50 Hz, 50 VA
3m circa 2.3kg
6mm or ½ “
0.5m + ﬁlter
8 FLUIDS, CHEMICALS
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project