Regulus Manual Filling Pump Owner's ManualAdd to my manuals
MANUAL FILLING AND REPLENISHING PUMP
EN v. 1.0
The pump is designed for replenishing ﬂ uid to solar and heating systems (cleaning and protective chemicals).
Max. working pressure
Pump housing, piston, nut
Ball with thread (handle)
0.98 kg nickel-plated brass nickel-plated brass stainless steel steel nbr-70 polypropylene (pp) duroplast
CONNECTION AND OPERATION
The proper position of the manual pump is with the suction ball valve points upwards (see the Dimensional drawing).
When working with the pump, it is important to keep it always ﬁ lled with ﬂ uid. Open the ball valves at the pump and attach hoses. The suction hose can be up to 3 m long. Pour ﬂ uid into the suction hose and immerse it into a vessel. Immerse the discharge hose into the same vessel and pump until air bubbles stop leaving the pump. Then attach the discharge hose to the system, keeping the ﬂ uid loss as little as possible. Open the system ball valve and replenish the ﬂ uid.
When ﬁ nished, close pump and system valves. The pump may remain installed in the system in order to enable easy replenishment when needed.
REGULUS spol. s r.o.
Do Koutů 1897/3
143 00 Praha 4
CZECH REPUBLIC http://www.regulus.eu
E-mail: [email protected]
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project