Oliver Travel Trailers Wilson Mobile 4G Cell Booster Installation guide

Add to My manuals
2 Pages

advertisement

Oliver Travel Trailers Wilson Mobile 4G Cell Booster Installation guide | Manualzz

Magnet-Mount Antenna

Installation Instructions

1.

Connecting Directly to a Phone

Attach your antenna to your cell phone using an adapter specific to your phone. The adapter (sold separately) connects the phone to the antenna cable and transfers power to and from the antenna. Adapter

Guide at: www.WilsonElectronics.com

2.

Connecting to a Wilson Electronics Signal Booster

The antenna cable attaches directly to the Signal Booster. Check your Signal Booster installation guide for specific instructions.

3. Installing the Magnet-Mount Antenna

To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches away from any other antennas and windows and free of obstructions. The Outside Antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. For a more professional looking installation, run the antenna cable under the door seal. Carefully pull down the door seal. Run the cable through the seal and push the seal back into place. This prevents constant wear and tear on the cable as the door opens and closes. Route the cable from the Outside Antenna and attach it to the connector labeled “ANTENNA” on the Signal Booster.

1 2

1. Magnet-Mount Antenna

2. Mini Magnet-Mount Antenna

Technical Support

For assistance with your installation contact Wilson Electronics Technical

Support toll free at 866-294-1660 Mon.- Fri. Hours: 7:00am to 6:00pm

MST, closed Saturday, Sunday & Holidays.

Email: [email protected] or visit www.WilsonElectronics.com.

90 Day Warranty

The Wilson Electronics Magnet-Mount Antenna is warranted for 90 days against defects in workmanship and/or materials and will be repaired or replaced, at the discretion of the manufacturer, to the original purchaser with dated sales receipt. The antenna and a copy of the receipt must be sent to the factory at purchaser’s expense where it will be repaired or replaced and returned shipping paid. Warranty does not cover damages caused by abuse, misuse, negligence, improper installation, etc. These are considered to be avoidable circumstances. All Wilson Electronics warranties are limited to the specific Wilson Electronics product only and do not include phone, vehicle or other external product.

U.S. Patent No. – 6,788,261

866-294-1660 www.WilsonElectronics.com

[email protected]

Part# 103019_Rev12_06.26.12

advertisement

Related manuals

advertisement