Phonak Una M, Una M AZ, Una SP, Una SP AZ Hearing Aid User Guide

Below you will find brief information for Hearing Aid Una M, Hearing Aid Una M AZ, Hearing Aid Una SP, Hearing Aid Una SP AZ. This guide will help you understand how to use your new hearing aid and how to care for it. It includes information on inserting the battery, turning the hearing aid on and off, controlling the volume and selecting a hearing program. It also covers important safety information and provides troubleshooting tips. If you are able to use FM communication with your Una hearing aid, you will also find instructions on attaching and removing the MicroLink receiver ML9S. Enjoy your new hearing aid and the benefits it can bring to your life.

PDF Download
Document
Hearing Aid Una M, Una M AZ, Una SP, Una SP AZ - User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Behind-the-ear (BTE) design
  • Digital hearing technology
  • Volume control
  • Program selection
  • Telecoil
  • FM compatibility
  • Wind & Weather Protector
  • Tamper-proof battery compartment
  • Easy to use

Frequently asked questions

Open the battery compartment completely and remove the old battery. Remove the protective foil from the new battery. Insert the new battery with the “+” sign (flat side of the battery) in line with the “+” marked on the battery cover and close it.

To turn the hearing aid ON, close the battery compartment. To switch the hearing system OFF, unlock the tamper-proof battery compartment and slightly open the battery cover until it snaps into its OFF position.

Use the volume control to adjust the volume above or below the preset volume. A beep confirms each action on the volume control. A double beep indicates that you have reached the limit of your volume control range.

Use the program switch to toggle between the different hearing programs your hearing care professional may have activated.

To attach the MicroLink receiver ML9S, firmly hold it in your hand and push the small black locking systems together with the bottom of the hearing aid. Then, push the hearing aid down until it snaps in. To remove the MicroLink ML9S, place the hearing aid on a firm surface, hold the MicroLink firmly and slide the locking system. Pull the hearing aid upwards with the other hand.
Preparing document for printing…
0%