User Manual
User Manual
Version 1.1
Date: December 2011
Table of contents
1
Instructions
3
1.1 Instruction for Card Swipe . . . . . . . . . . .3
1.2 Precautions . . . . . . . . . . . . . . . . .3
1.3 System Specifications . . . . . . . . . . . . .3
2
Introduction of device
4
2.1 Overview of Device Functions
2.2 Product Appearance . . . .
2.3 Keypad . . . . . . . . . .
2.4 Date & Time . . . . . . . .
2.5 Voice Control . . . . . . .
2.5.1 Turn On/Off . . . . . .
2.5.2 Adjust Volume . . . . .
2.6 Security Features . . . . . .
2.6.1 Admin Affirm . . . . . .
2.6.2 Tamper Switch . . . . .
2.7 Cleaning Terminal . . . . .
2.8 Restarting & Restting the unit .
2.8.1 Restarting Terminal . . .
2.8.2 Resetting Terminal . . . .
3
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.4
.4
.5
.6
.6
.6
.6
.6
.6
.6
.6
.7
.7
.7
Connections
3.1 USB Port . . . . . . . . .
3.2 TCP/IP . . . . . . . . .
3.2.1 Using TCP/IP . . . . .
3.3 RS232/RS485/Wiegand port
3.3.1 Using RS232. . . . . .
3.3.2 Using RS485. . . . . .
3.4 Power Supply Port . . . .
3.5 Access Control Port . . . .
3.6 Using USB . . . . . . . .
3.6.1 Using USB . . . . . .
3.7 Communication Key . . .
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.7
.7
.7
.8
.8
.8
.8
.8
.8
.8
.8
User
4.1 Enrolling User. . . . . . . . . .
4.1.1 Card Enrolment . . . . . . .
4.1.2 Password Enrolment . . . . .
4.1.3 Card and Password Enrolment
9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.9
.9
.9
2
Table of contents...continue 1
4
User...continue
4.2 Verifying User . . . . . .
4.2.1 Voice Message . . . .
4.2.2 Password Verification .
4.2.3 Card Verification . . .
4.3 Types of Verification Modes
4.4 Adding User Information . .
4.5 Deleting User . . . . . .
4.6 Access Level/Priviledge . .
5
9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
System
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Data
6.1.1 Deleteing Transaction Logs .
6.1.2 Deleteing all Data . . . . .
6.1.3 Managing User Priviledges .
6.1.4 Resetting to Factory Settings
10
10
10
10
11
11
11
11
11
5.1 General Settings . . . . . . . . . . .
5.1.1 Adjusting Date/Time . . . . . . . .
5.1.2 Date Format . . . . . . . . . . .
5.1.3 Voice . . . . . . . . . . . . . .
5.1.4 Volume % . . . . . . . . . . . .
5.1.5 User Interface Style . . . . . . . .
5.1.6 Auto Alarm . . . . . . . . . . . .
5.1.7 Defining Work Codes . . . . . . .
5.3 System Information . . . . . . . . . .
5.3.1 Number of Users in the Terminal . . .
5.3.2 Quantity of Attendance Logs Saved .
5.3.3 Number of Admins Registered. . . .
5.3.4 Number of Password User Available .
5.3.5 Number of Time Scanners Used . . .
5.3.6 Free Space . . . . . . . . . . . .
5.3.7 Device Information . . . . . . . .
5.4 Log Information . . . . . . . . . . .
5.4.1 Alarm Super Log . . . . . . . . .
5.4.2 Alarm Attendance Log . . . . . .
5.4.3 Recheck Min . . . . . . . . . . .
6
.
.
.
.
.
.
.
.
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
13
13
13
13
14
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14
14
14
14
2
Table of contents...continue 2
7
USB
14
7.1 Understanding the need for USB
7.2 Type of USB . . . . . . . . .
7.3 Downloading Attendance Logs
7.4 Downloading User Data . . . .
7.5 Uploading User Data from USB .
7.6 Uploading Short Messages . . .
8
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Access
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RFID card function
15
15
15
16
16
17
17
17
17
17
18
18
18
18
9.1 Understanding the RFID Card. .
9.2 Enrolment of RFID Card . . . .
9.3 Verification using RFID Card only
9.4 Multi-verification Methods . . .
9.5 Deleting RFID Card . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10 Autotest
10.1 Who Should do the Autotest
10.2 Run All Tests at Once . . . .
10.3 Flash Test . . . . . . . .
10.4 LCD Test . . . . . . . . .
10.5 Voice Test . . . . . . . .
10.6 Key Test . . . . . . . . .
10.7 RTC Test . . . . . . . . .
14
15
15
15
15
15
15
8.1 Using the Terminal as Door Access
8.2 Access Options . . . . . . . .
8.2.1 Time zone . . . . . . . . .
8.2.2 Grouping . . . . . . . . .
8.3 User Account Options . . . . . .
8.4 Access Combination . . . . . .
8.5 Lock . . . . . . . . . . . . .
8.6 Door Sensor Delay . . . . . . .
8.7 Door Sensor Mode . . . . . . .
8.8 Door Sensor Alarm . . . . . . .
8.9 Turning Off Alarm . . . . . . . .
8.10 Alarm Count . . . . . . . . .
8.11 Group Verification Type . . . .
9
.
.
.
.
.
.
18
18
18
18
19
19
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19
19
19
19
19
19
19
2
Table of contents...continue 3
11 Troubleshooting
11.1 “Unable to connect” Appears.
11.2 “Admin affirm” Appears . . .
11.3 LED is Blinking all the Time . . .
11.4 RFID Card doesn’t Respond . .
11.5 No Sound . . . . . . . . .
20
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
20
20
20
20
2
1. Instructions
Summary
This device is supplied with an integrated non-contact RFID (125 MHz) card reader module. By offering multiple verification modes such as, RF card, pin, RF card verification +
pin. This device can accommodate diversified user needs.
* Please ensure correct
placement of finger on
reader.
1.1 Instruction for Card Swipe
Swipe your card across the sensor area after the voice prompt and remove your card
after the device has sensed it. For the swipe area, see 2.2 Product Appearance.
1.2 Precautions
Protect the device from exposure to direct sunlight or bright light, this greatly affects the
terminal and leads to verification failure.
It is recommended to use the device under a temperature of 0–50°C so as to achieve
the optimal performance. In the event of exposure of the device to the outdoors for
long periods of time, it is recommended to adopt sunshade and heat dissipation facilities because excessively high or low temperature may slow down the device operation
and result in high false rejection rate (FRR).
When installing the device, please connect the power cable after connecting other
cables. If the device does not operate properly, be sure to shut down the power supply
before performing necessary inspections. Note that any live-line working may cause
damage to the device and the device damage arising out of live-line working falls beyond the scope of our normal warranty.
* 125 MHz RFID Cards can
be used.
For matters that are not covered in this document, please refer to related materials
including the installation guide, access control software user manual.
1.3 System Specifications
SPECIFICATION
Transaction Capacity:
100 000 transactions
Hardware Platform:
ZEM500
Built-in Card Reader:
125 Mhz RFID Reader
Communication:
RS232/485, TCP/IP,USB-host
Wiegand Ports:
Input and Output any bits
Access Control interfaces:
3rd party electric lock,
door sensor, exit button,
open door alarm.
Access Control functions:
50 time zones, 5 access
control groups, 10 unlock
combinations
* Do not install in direct
sunlight or bright light
* 0–50°C for optimal performance
* Shut down the unit and
power before attempting
maintenance
3
2. Introduction of Device
Summary
2.1 Overview of Device Functions
As an integrated access control device, our product can be connected with either an
electronic lock or an access controller. This device features simple and flexible operations and supports the use of management cards. The screen displays will guide you
through the operations. It supports access control function for a security management.
It supports multiple communication modes.
* Different user access
modes available on the
unit
Attached the back plate on the wall securely and attach the terminal to the back
plate when mounting it on the wall.
* Install with back plate
* Recommended height
from the floor - 1.2m
2.2 Product Appearance
Front view:
LED indicator
RFID scan area
LCD Display
USB Port
Keypad
Speaker
•
LCD Screen Displaying status of terminal, day, date and time.
•
LED Display
•
Green LED – The terminal is working fine and it is in standby mode.
•
Red LED – There is an error at the terminal that requires checking. For
first time use, the terminals need to be charged fully to avoid having
the red light blinking.
•
Keypad To input instructions into the terminal and to allow configuration.
•
RFID Card scan Area. Area that reads RFID cards.
•
Speaker For terminal voice emission.
4
Summary
Bottom view:
* Reset button is situated
below the unit
Reset Button
•
Reset button: Used to restart the device.
Side View:
* USB port is situated on the
side of unit
USB Port
•
USB Port To upload/download users information, password and transaction
logs via USB flash disk.
Rear View:
Tamper switch
Wiring terminal
•
Wiring terminal: Connects with locks and power supply through cables.
•
Tamper Switch: Used to generate a tamper alarm.
2.3 Keypad
You can insert inputs into the terminals through the keypad. It contains numbers from
0-9, an OK button, an ESC/Cancel button, a Scroll up/down button, a doorbell button
and a Menu button.
5
* Keypad used for user
password / pin entry and
navigation of the unit
2.4 Date & Time
Summary
The terminals displays the date and time at the home screen. Choose the date and
time format based on your preference.
* Ensure correct time and
date
Set your time and date:
•
* Ensure correct time and
date format
Press Menu > Options > Systems Options > Date/Time > set your time and save.
To change the date format:
•
* Toggle voice ON/OFF
Press Menu > Options > Systems Options > Fmt > Determine the date format based
on your preference.
* Adjust unit Volume
2.5 Voice Control
Voice Control lets you control the level of volume emitted by the terminal.
2.5.1 Turn On/Off
The system lets you turn on/off the voice based on your preference.
•
Press Menu > Options > System Option > Adv Option > Voice > Y/N.
2.5.2 Adjust Volume
The default volume of the terminal’s voice is 67. The volume can go as high as 100 and
as low as 0. To sustain the performance of the speaker, it’s recommended to stay at
range 60-70.
To adjust the volume
•
Press Menu > Options > System Option > Adv Option > Adj VOL (%) > adjust accordingly .
2.6 Security Features
Security features help protect the information in the terminal from being accessed by
unauthorized individuals.
* Ensure to enrol administrator
2.6.1 Admin Affirm
Register an administrator into the system by enrolling a card or password to a user ID.
•
Press Menu > User Manage > Enroll Admin > Choose enrollment method > Perform
enrolment and Save.
After enrolling an administrator, the main menu can only be accessed by the administrator.
2.6.2 Tamper Switch
The terminals come with a tamper switch located at the rear of the terminals. During
installation, the tamper switch is compressed against the back plate. Any attempt to
dismantle the terminal will trigger an alarm and a “System Broken” message will be
displayed on the panel.
* Tamper switch for added
security on the unit
2.7 Cleaning Terminal
2.7.1 Cleaning The Body
Use a dry cloth to clean the terminal’s body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of
the terminal because it could damage it.
* DO NOT USE:
** Liquid
** Alcohol
** Ammonia
6
2.8 Restarting and Resetting Terminal
Summary
If a feature isn’t functioning as it should, try restarting or resetting the terminals
2.8.1 Restarting the Terminal
•
Push the On/Off button or “reset button” on the terminal to restart the terminal. If
you can’t restart the terminal, or if the problem persists, you might want to reset.
* If unit is not functioning as
per normal, press the RESET
button or the POWER button to restart the unit
2.8.2 Resetting the Terminal
•
Press Menu > Option > System Option > Adv Opt > Reset terminal. Resetting of the
terminal will cause all your settings to return to its original factory settings. Make sure
that you have backed up all data before you proceed.
* RESET will not delete any
settings or data
3. Connections
3.1 USB Port
* USB is used for data
transfer
Linking with USB flash disk for remote data transfer.
3.2 TCP/IP
Connect with CAT 5 connector cable for LAN connection, one end to this port and
another end to the computer’s TCP/IP Port.
TCP/IP for Single Connection – Linking the terminal to a single computer using TCP/IP requires Ethernet 10/100Base-T Crossover Cable. The cable can be used to cascade hubs
or to connect Ethernet stations back-to-back without a hub. It works with both 10Base-T
and 100Base-TX
* Unit can be connected to
local LAN with CAT 5 connector cable
3.2.1 Using TCP/IP
Determining the IP Address
* Insert an IP Address
IP address is important, as it is a unique address of the terminal in LAN. Without the IP address, locating the specific terminal is not possible. To input the IP address of the terminal:
•
Press Menu > Options > Comm Opt > IP Addr > Key in IP address.
Setting up Ethernet
It is important to setup the Ethernet to connect the terminals using TCP/IP connection.
Setting up Ethernet is by enabling the Ethernet function:
•
Press Menu > Options > Comm Opt > Ethernet > Yes. Turn off the terminal after you
have set the Ethernet to Yes. Now, plug the network plug to the Ethernet interface
and turn the power on.
Determining the Netmask, Gateway and NetSpeed: For TCP/IP connection, please configure the netmask, gateway and netspeed for the terminal.
•
Press Menu > Options > Comm Opt > NetMask > Insert the numbers.
•
Press Menu > Options > Comm Opt > Gateway > Insert the numbers.
•
Press Menu > Options > Comm Opt > NetSpeed > Choose the speed of your Ethernet connection
7
* Unit does not operate
with DHCP
3.3 RS232/RS485/Wiegand Port
Summary
•
RS232 – Connection to a computer using RS232 cable.
•
RS485 Single Connection - Connection to a single computer using RS485 wire.
•
RS485 Network Connection - Connection to multiple computers using Daisy Chain
connection.
•
Wiegand Output – Connecting with third party connector or terminal(s).
* Set BAUD RATE to use
RS232 connection
3.3.1 Using RS232
For connection via RS232, baud rate is the determinant of communication speed between the terminal and the software. The higher the baud rate, the faster the speed is.
To turn on RS232 connection and set the baud rate:
•
Press Menu > Options > Comm Opt > RS232 >
Change the RS232 connection to Y. To change baud rate:
•
Press Menu > Options > Comm Opt > Baud rate > Change the Baud rate accordingly.
3.3.2 Using RS485
For connection via RS485, baud rate is also the determinant of communication speed
between the terminal and the software but the speed must be according to the speed
of the converter. Check your converter for the speed.
* BAUD RATE must accommodate converter speed
To turn on RS485 connection and set the baud rate:
•
Press Menu > Options > Comm Opt > RS232 > Change the RS485 connection to Y .
To change baud rate:
•
Press Menu > Options > Comm Opt > Baud rate > Change the Baud rate accordingly.
3.4 Power Supply Port
Insert the Power Adapter point to this port for power. (DC12v)
3.5 Access Control Port
Linking the terminal to door lock system.
3.6 Using USB
USB flash disk is useful in cases where the terminal is installed far from a PC or there is a
connection problem.
3.6.1 Using USB
•
Press Menu > PenDrive Mgmt > Choose the operation that you want to carry via USB
3.7 Communication Key
* Set COMM KEY to “0”
Since the software is controlled by an activation code and product key, set the COMM
key to zero.
•
* Use USB Connector cable
Press Menu > Options > Comm Opt > COMM Key > 0
8
4. User
Summary
4.1 Enrolling User
The terminals can enrol, passwords and card information. This chapter covers all possible
user enrollments in the terminals. Caution: Enrollment of supervisor or administrator is important to ensure the terminals data safety. Prior to enrolling a new user, a supervisor has
to be enrolled first by using any of the methods mentioned below. Select Enroll Admin >
Choose the Privilege Level either Supervisor or Administrator to proceed.
* Ensure to enrol an administrator on the unit before
enrolling users
4.1.1 Card Enrolment
The default card for the terminal is the RFID card. MiFare and HID card systems are available upon request.
Enrolling Card:
•
Press Menu > User Manage > Enroll User > Reg RFID > New Enroll? > OK > Key in User
ID (PIN) > Wave the card at the scanning area until the screen displays the Card ID
> (OK) Save
4.1.2 Password Enrolment
The terminals offer password verification and the maximum length of password is 5 digit.
Enrolling password: Press Menu > User Manage > Enroll User > Enroll Pwd > New Enroll? >
OK > Key in User ID (PIN) > OK > Input your password > LCD showing the ID with minus -P
to indicate that the user ID is using password > OK (Save)
Changing password:
•
Press Menu > User Manage > Enroll User > Enroll Pwd > ESC > Input User ID > OK >
Change your password > LCD showing the ID with minus -P to indicate that the user
ID is using password > OK (Save)
4.1.3 Card and Password Enrolment
The terminals offer a combination of card and password enrollment for better security.
Enrolling Card and password:
•
Press Menu > User Manage > Enroll User > Reg Card & Pwd > New Enroll? > OK > Key
in User ID (PIN) > OK > flash the card > Input your password and confirm the password one more time > LCD is showing the ID with minus -OP to indicate that the user
ID is using a combination of card and password > OK (Save) Linking with USB flash
disk for remote data transfer.
9
* Password / pin options
available for added security
4.2 Verifying User
Summary
4.2.1 Voice Message
VOICE / MESSAGE WHAT DOES IT MEAN?
•
“Verified” - Identity verification is successful, the terminal stores the transaction logs
and opens the door (if connected to door access)
•
“Card error registered” - Identity verification is failed because the card is not enrolled on the system or the password is incorrect.
•
“Admin Affirm” - You are not an administrator of the system and you cannot access
Menu page
4.2.2 Password Verification
Password is an option for those who prefer not to use other verification methods. To
verify via password, insert User ID > OK > insert password and press OK.
4.2.3 Card Verification
Place the card on the card scanning area and the terminal will read and verify the
card
4.3 Types of Verification Methods
The terminals offer various verification methods which include , Password (PW), and RFID
(RF). You can configure the terminal to offer multi verification methods.
•
* Depending on security
level, you can use more
than one verification setup
Press Menu > Options > Access Options > Group VerType > Select the Group > OK >
Select the time > OK > Down arrow and select Verification Type > OK
The terminals support the following combinations of verification:
VERIFICATION TYPE
DESCRIPTION
RFID
Card only
PW
Password only
PW / RFID
Password and Card
4.4 Adding User Information
User information can be added into terminals through the software. After the information is updated, sync with the terminal to display the information.
4.5 Deleting User
Only an administrator can perform user deletion at the terminal. To delete certain
user(s):
•
* Only administrator can
delete users
Press Menu > User Manage > Delete > Input User ID > The terminal will tell you the
verification method enrolled by the user ID > OK > Prompting you to Delete User >
Press OK > Confirmation is required > OK as Yes and Esc as No
4.6 Access Level/Privilege
The terminal offers various types of access level or privilege.
10
5. System
Summary
5.1 General Settings
5.1.1 Adjusting Date/Time
The function of the terminal is to record time attendance and door access activities of
employees. Precision in time and date cannot be compromised for the system to work
efficiently. Adjust Date/Time according to your time zone.
•
* Ensure correct date &
time
Press Menu > Options > System Opt > Date/Time > Select Value > OK
5.1.2 Date Format
Date format differs based on countries for example in Malaysia the format used is, date
month year whereas in America, month comes first. Choose your date format according to your preference. The default format is dd-mm-yy.
•
* Ensure correct date &
time format
Press Menu > Options > System Opt > Fmt > Select Format > OK
5.1.3 Voice
The terminal has certain voice commands to guide users during enrolment and to notify
users during the identity verification process.
•
* Voice control ON/OFF
Press Menu > Options > System Opt > Adv Option > Voice > Y/N
5.1.4 Volume (%)
Voice Control lets you control the level of volume emitted by the terminal.
Adjust Volume: Default volume of the terminal’s voice is 65. The volume can go as high
as 100 and as low as 0. To sustain the performance of speaker in the terminal it’s recommended to stay at range 60-70. To adjust the volume
•
Press Menu > Options > System Opt > Adv Option > Adj VOL (%) > Set your number
> OK.
5.1.5 User Interface Style
The terminals offer different user interface style. Select your style based on your preference.
•
Press Menu > Options > UI Style > Select your style > OK
5.1.7 Auto Alarm
Auto Alarm allows you to connect the terminal to third party alarm system.
•
Menu > Options > System Opt > Adv Option > Auto Alarm > Y/N > OK
5.1.8 Defining Work Codes
The terminal provides work code feature which allowing user to key in a predefined
numbers after verification. The work code numbers are predefined in software. The following table is showing examples of work codes.
Reasons
Work code
Check In
00
Check Out
01
OT start
04
Done
05
Sick Leave
10
Half-day Leave
12
Workcode Mode 1: Verification followed by work code
Workcode Mode 2: Work code followed by verification
To disable: Select No
•
Press Menu > Options > System Opt > Adv Option > Work Code > OK > Select Preference > OK
11
* Customised work codes
available
5.3 System Information
Summary
The terminals keep information of the system and this information is available for viewing
by administrators.
5.3.1 Number of Users in the Terminal (User Count)
* Check number of password / pin users
Every model of the terminal has different user capacity.
•
Press Menu > Sys Info > User Cnt > View the number
5.3.2 Quantity of Attendance Logs Saved In the Terminal (Att Log)
Once verification is completed, an attendance log will be stored in the terminal as record. A terminal can contain up to 120,000 logs depending on the models.
•
Press Menu > Sys Info > AttLogs Cnt > View the number
5.3.3 Number of Administrators Registered in the Terminal (Admin Count)
A company can enroll several administrators to manage the system. This function enable the company to check the number of administrator present for a particular terminal.
•
Press Menu > Sys Info > Admin Cnt > View the number
5.3.4 Number of Password Users Available in the Terminal (Password User)
Users can do verification using PIN password and a combination of card and password.
To find out how many users are using password:
•
Press Menu > Sys Info > Password User > View the number
5.3.5 Number of Time Scanners Have Been Used for Verification (S Logs)
S logs stands for scanner logs, which means the number of times the scanner has been
used for verification, regardless of whether it is successful or not. To view the scanner
logs:
•
Press Menu > Sys Info > S Logs > View the number of S Logs
5.3.6 Free Space Information (Free Space)
* Free space includes the
Find out the information about availability of space in your terminal through this function.
•
Press Menu > Sys Info > Free Space > View the info Information available includes,
att log and S logs.
5.3.7 Device Information (Dev Info)
Find out the information about your terminal through this function. Press Menu > Sys Info
> Dev Info > View the info
12
total ATT LOGS, Fingerprint
count and S LOGS
Summary
Information available includes:
•
AttLog (10k): Shows the number of attendance logs that can be stored in the terminal, for example for AttLog (10k) 12 means 10,000 x 12 = 120,000
•
S Logs: Shows the number of Scanner Logs available for the terminal.
•
Manufactured Time (Manu Time): The date and time when the terminal was produced is displayed when you press Manu Time
•
Serial Number of the Terminal (Serial Num): The serial number of the terminal is important to activate the software and to liaise with ZKSoftware in support issues. The
Serial number is pasted on the back of the terminal but in case the sticker is damaged, this is where you can retrieve the serial number.
•
Manufacturer: Get the name of the manufacturer of the terminal here.
•
Device Name: All models have different names. If you don’t know the name of the
terminal that you are having, get it here.
•
Firmware Version: Support sometimes require a firmware version to resolve some
support issues. The version and date of the version is released is provided here. For
example: Ver 6.20 Aug 19 2009
•
View MAC: This feature is a security feature of the products. Linking Software to the
terminal requires the correct MAC address. Without availability of MAC address,
the software will not be activated correctly. All products are supplied with the correct MAC address to ease communication. This is also to hinder people from using
the software with a different hardware brand. An example of a MAC address is
00:0A:5D F1 BE 57.
•
•
•
Press Menu > Sys Info > Dev Info > View MAC
MCU Version: An MCU is the Main Controller Unit for the terminals. Version of the
MCU determines the features and functions the terminal carries. To check the MCU
Version:
Press Menu > Sys Info > Dev Info > MCU Version
5.4 Log Information (Log Opt)
A terminal can only retain certain amount of information before the terminal becomes
full and stops accepting anymore data . To maintain the performance of a terminal,
you can set an alarm to alert you when the data reaches a certain warning level.
5.4.1 Alarm Super Log
To instruct terminal to alert user if the transaction storage for administrator login is less
than as configured. Default value is 99.
5.4.2 Alarm Attendance Log
To instruct terminal to alert user if the transaction storage is less than as configured. Default value is 99
5.4.3 Recheck Min
To instruct terminal to update clocking times of all users in a time interval. Default is 10
mins.
13
* Attendance logs need to
be monitored
6. Data
Summary
Every time an enrolment is performed or a verification is done, a transaction log is created and stored inside the terminal. The data contains created terminal ID, date, time,
userID and transaction activity.
•
For example, 0105021009000000000010000:
These logs need to be managed to maintain the effectiveness of the terminal. There are
5 functions available in Data icon to enable you to manage data in the terminals
6.1.1 Deleting Transaction Logs
Delete Attendance Logs: The terminal stores every transaction logs of its user. Once a
user is enrolled and verified, the logs will be kept in the terminal. Please be certain before performing this operation because once the OK button is pressed, all attendance
logs will be lost.
•
Press Menu > Options > System Opt > Adv Option > Del Attlogs > OK > Delete? OK
* System will stop if buffers
are full
* Ensure warning alarm
values are set
6.1.2 Deleting All Data
Clear All Data: The terminal contains all user data including User ID, verification methods, logs, etc. This operation allows deletion of all data in the terminal. Please be certain
before performing this operation because once the OK button is pressed, all data will
be lost.
* Deleting all data includes
•
** Logs
Press Menu > Options > System Opt > Adv Option > Clear All Data > OK > Delete?
OK
** user id
** verification methods
6.1.3 Managing User Privileges
Clear Admin Privilege: To access system menu, it is recommended to enroll administrator to the system. Once administrator is enrolled, every time someone presses the Menu
button, Admin Affirm message will be displayed. Clear Admin Privilege operation allows
the current administrator to clear all his/her data to make way for the new administrator’s data. Once the operation is completed, system menu is accessible by all users.
•
Press Menu > Options > System Opt > Adv Option > Clr Admin Pri > OK > Continue?
> OK
6.1.4 Resetting to Factory Settings
Reset Option: This feature is to restore all settings in the terminal to return to the original
factory settings. You have to be certain before conducting this operation because
once the OK button is pressed the terminal will be reset automatically.
•
Press Menu > Options > System Opt > Adv Option > Reset Opts > OK. Please redo all
the settings to suit to your company’s requirements.
•
Press Menu > Data icon > Restore to Factory Settings > Confirmation is required (Yes/
No)
* Ensure all necessary data
is backed up before performing this function
7. USB
7.1 Understanding the Need for USB Flash Disk
Communication between the terminal and a PC is very important to upload and download transaction data for time attendance and door access reports. The terminal offers
a few communication options such as LAN and serial cable connections but sometimes
there are scenarios that require USB (Universal Serial Bus) connectivity. USB can connect
to the terminal with a computer for download and upload of user information and transaction logs. In the terminal, the USB Flash Disk function is known as Pen Drive Management.
14
* If unit is used as a standalone, data can be managed via USB
7.2 Type of USB
Summary
There are various types of USB available in the market. The terminal can only work with
USB flash disks that support minimum Linux Kernel 2.4.x, working fine with Imation, Transcend and Pen Drive (minimum support Linux Kernel 2.4.x)
* Linux Kernel 2.4.x
7.3 Downloading Attendance Logs
To download attendance logs from the terminal to the computer:
•
Press Menu > Pen- Drive Mng > DwnLoad AttLog > The terminal would require you to
plug in the USB Flash Disk to proceed. After the download process is complete, eject
USB Flask Disk from the terminal and connect it to your PC that has been installed
with the software. Upload the data from the USB into software for further processing.
7.4 Downloading User Data
Enrolment of user must be done at the terminal. During enrolment, user data such as
name and user ID are entered. To sync the data between the terminal and computer:
•
* Downloaded user data
can be uploaded to other
units
Press Menu > PenDrive Mng > DwnLoad User > The terminal would require you to
plug in the USB Flash Disk to proceed.
7.5 Uploading User Data from USB to Terminal
While administrator can input user data from the terminal, the rest of the users information is completed in the software. Get the latest updates of user information from the
software to the terminal by using a USB Flash Disk.
•
Press Menu > PenDrive Mng > UpLoad User > The terminal would require you to plug
in the USB Flash Disk to proceed.
7.6 Uploading Short Messages
Some the terminals can display a short messaging system on the LCD. The SMS can be
private or public. To assign sms to an individual or all staff using USB:
•
* Short message will display
when user clocks in
Press Menu > PenDrive Mng > Upload SMS > Insert the USB Flash Disk to proceed
8. ACCESS
8.1 Using The Terminal as Door Access
The terminals can be connected to door access accessories like electromagnetic lock,
door bolt, exit button, etc to control access to doors. Make sure you understand the
access options offered in the terminal and do necessary configurations for your door
access system.
8.2 Access Options
This function determines user’s accessibility or authority to enter certain doors.
8.2.1 Time Zone
The period where a user is allowed access is called TIME ZONE or time period (TP). In
total there are 50 time zones available in ZKSoftware models. Each Time Zone has 7 time
slots for Monday until Sunday. To define time zone:
•
Press Menu > Options > Access Options > Define TP > Select the Time Zone number
and determine the time for each day.
15
* Units can be connected
to access control systems
Summary
Example 1
TIME ZONE
SUN
MON
TUE
WED
THU
FRI
SAT
1
0900:1800
0900:1800
0900:1800
0900:1800
0900:1800
0900:1800
0900:1800
What does Time Zone 1 mean?
* It’s recommended to use
software to configure time
zones
Time Zone 1 consists of a constant access time for a period of one week where a user
checks in at 9:00 and leaves at 18:00
Example 2
TIME ZONE
SUN
MON
TUE
WED
THU
FRI
SAT
2
0000:2359
0800:1200
0800:1200
0800:1200
0800:1200
0800:1200
0000:2359
* Time zones allow entry in
allotted time frame
What does Time Zone 2 mean?
Time Zone 2 is showing variation in access schedule from 8am-12pm from Mondays to
Fridays and users are not allowed any access on the weekends.
Example 1
TIME ZONE
SUN
MON
TUE
WED
THU
FRI
SAT
3
0000:2359
1400:1800
1400:1800
1400:1800
1400:1800
1400:1800
0000:2359
What does Time Zone 3 mean?
Time Zone 3 is showing variation in access schedule from 2pm-6pm from Mondays to
Fridays and users are not allowed any access on the weekends
8.2.2 Grouping
When a group of users are having an almost similar time zone assignment, they can
be grouped together. For example, Time Zone 2 and Time Zone 3 are suitable for one
group where users in this group checks in at 8:00 until 12:00 has a, break time from 12:00
to 14:00 , continue from 14:00 to 18:00, and no one is allowed access during weekends.
Therefore, these users will be in Group Time Zone 1. The table below illustrates the Group
Time Zone concept.
GROUP TIME ZONE
TIME ZONE
TIME ZONE
1
2
3
TIME ZONE
There are a total of 5 Group Time Zones available in the system. The system default is
Group 1 and Time Zone 1. Therefore, the newly enrolled users automatically will be in
an unlocking status. If those users are not included in the grouping combination setting,
they are given permission to record attendance but they can’t unlock any door. To
define Group Time Zone:
•
Press Menu > Options > Access Options > GRP TP Define >
There are a total of 5 Group Time Zone offered and each Group Time Zone accepts
only 3 time zones.
8.3 User Account Options
After a user has been enrolled, you can configure his/her access option settings.
•
Press Menu > Options > Access Options > User Acc Opts > Input the user ID that you
want to set the access option for > Determine the below matter:
USER ACC OPTS
WHAT YOU SHOULD DO
Belong to Group
Select group for this user
Use Group TPs
Yes or No
TP1
Select your Time Zone number 1
TP2
Select your Time Zone number 2
TP3
Select your Time Zone number 3
VERType
Select the verification type. 15 available
Use Grp VS
Yes or No
16
* Users can be entered into
groups that are defined
into different time zones
8.4 Access Combination
Summary
Access Combination is when you combine different users’ verification in order to gain
access. The system offers 10 different Access Combos and each combination applies to
3 Group Time Zones:
ACCESS COMBO
GROUP TIME ZONE
1
1
TP1: 0900 – 13:00
2
TP2: 1000 – 1500
3
TP3: 1300 - 1400
* Use combo sets for
added security (2 or more
users need to verify before
access)
To use the Access Combo, users from all the three time zones must be present for verification and the time period of the three groups must be valid in order to gain access.
As shown in these time zones, 13:00 is the overlapping time where all of them can gain
access.
To configure Access Combo:
•
Press Menu > Options > Access Options > Access Comb > Select the combination
you want for example Comb1 > OK > input the number, in this case 123 to represent
GRP TP1, GRP TP2, GRP TP3> OK
8.5 Lock
The opening period of the electromagnetic lock or door bolt can be controlled according to your requirement or preference. The default value is 150 which translates to 3 sec.
50 is equivalent to 1 second.
•
* Ensure to set maglock
time settings
Press Menu > Options > Access Options > Lock > Determine the value of lock delay.
8.6 Door Sensor Delay
Door sensor delay can be configured to alert users if a door is not closing well after a
time period. A door sensor must be installed prior to activation of this option. The default
period is 10seconds and the maximum period is 999seconds.
•
* Install door sensor prior to
activating this option
Press Menu > Options > Access Options >Dsen Delay > Determine the value of lock
delay.
8.7 Door Sensor Mode
Door sensor mode is to configure the time to alert an internal buzzer if the door is not
closing properly. The standard of door locking system includes:
* Internal alarm when door
is closing properly
•
Normally Closed (NC): An electrical contact that regularly allows electricity to flow
until it is signaled to open
•
Normally Open (NO).: An electrical contact that rarely allows electricity to flow. To
use door sensor, select NC. Press Menu > Options > Access Options > Dsen Mode >
Determine the type correctly > OK
8.8 Door Sensor Alarm
Door Sensor Alarm can be configured to alert users by using the alarm system if a door
is not closing well after a time period. An alarm system must be installed first to use this
operation.
•
Press Menu > Options > Access Options > Dsen Alarm > Determine the period > OK
17
* Set alarm for when door is
closing within time frame
8.9 Turning Off Alarm
Summary
There are scenarios that require you to turn off your alarm system and this can be done
through the terminal. To do this you have to press and hold the security button at the
back of the terminal followed by
•
Pressing Menu > Turn Off Alarm .If you didn’t press the security button, the message
“System Broken!!!” message will be displayed when you press the Turn Off Alarm
operation button.
8.10 Alarm Count
There is a limit to unsuccessful verification by a user. Predefine the value of unsuccessful verifications so if a user exceeds the allowed times, the alarm will be triggered if your
terminal is installed with an alarm system.
•
Press Menu > Options > Access Options > Alarm CNT > Define the value > OK
8.11 Group Verification Type
This function offers various verification type(s) for every group that can be set according
to time. Description of verification types available in terminal is explained in Chapter 4:
User.
•
Press Menu > Options > Access Options > Group Ver-Type > Select the Group > OK >
Select the time > Down arrow and select Verification Type. After finished, press OK
9. RFID CARD FUNCTION
9.1 Understanding the RFID Card
The terminals are versatile and it can accept card verifications. This chapter covers the
Radio Frequency Identification or better known as RFID system. The terminals accept
RFID card with specifications of 64-bit, 125kHz.
9.2 Enrolment of RFID Card
RFID can be enrolled alone, with or without password. Each RFID card comes with a
unique ID and the terminals will read from the numbers and match it with the card.
Enrollment of RFID is easy.
•
* Enrol RFID card
Press Menu > User Manage > Enroll User/Admin > Reg RFID > OK > Do you want to
do new enrollment? > OK > Insert the user ID > OK > Wave the card to the induction
area and the machine will display the card number on the LCD along with the User
ID > OK > The terminal will display User ID-C meaning that the ID is enrolled with card
> OK(Save)
9.3 Verification Using RFID Card Only
In case you want the terminal to read only RFID card, you can configure this selection
by selecting RF on Group VerType under Access Options.
9.4 Multi-verification Methods Using RFID
The terminals allow multi-verification where a user is required to use two or more verification methods before he is allowed access to certain areas. Refer to Chapter 4: User,
page 19 under Types of Verification Method for more information about different combinations for the terminals and how to configure them. Basically, in order to select different verification methods, make sure that you have registered or enrolled that method in
the terminal for the said User ID before any selection is made.
18
* User need to verify access with more than one
method
9.5 Deleting RFID Card
Summary
RFID cards can be used again and again but the information in the card must be deleted first before inserting new information.
•
Press Menu > User Manage > Delete > Input the User ID and wave the card at the
induction area > The LCD will ask whether you want to delete the User ID-C > The
terminal will ask whether you want to delete User ID > And to delete user. Press OK
to all. Once the card has been emptied, it can be used again. Changing Card ID
•
Press Menu > User Manage > Enroll User/Admin > Reg RFID > ESC > Change Card ID
> Key in Original ID > OK > Wave new card > OK (Save)
* Only administrators can
delete
10. Autotest
10.1 Who Should do the Auto Test?
Auto Test page is to diagnose or analyze the conditions in the terminal. There are 6 tests
available in the Auto Test page and only the administrator is allowed to perform the
test.
10.2 Run All Tests At Once
The Auto Test contains 6 tests and to run all of them at once,
•
Press Menu > Options > Auto Test > Run All Test > OK > “Pls keep Pwr On” message
will be displayed > The terminal will run all tests and when finished the LCD will display the result such as this: All: 31 Bad: 0, to indicate the level of breakdown in the
terminal.
10.3 FLASH Test
•
Press Menu > Options > Auto Test > FLASH test > OK > “Pls keep Pwr On” message
will be displayed > The terminal will run all tests and when finished the LCD will display the result such as this: All: 31 Bad: 0
10.4 LCD Test
•
Press Menu > Options > Auto Test > LCD test > OK > The screen will display lines of
‘W’. Any missing Ws or jagged W indicates LCD error. Escape to return to the previous page
10.5 Voice Test
•
Press Menu > Options > Auto Test > Voice test > OK > The LCD will display for example: “Play Voice 1” and you will hear the message for that. Press OK to listen to the
next voice. Any error indicates that something is wrong with the speaker.
10.6 Key Test
•
Press Menu > Options > Auto Test > Key Test > OK > Press any key and look at the
LCD display. If the key matches the description on the LCD, the keypad is in good
condition
10.7 RTC Test
Press Menu > Options > Auto Test > RTC test > OK > If the RTC battery is still working, the
test will prompt an “OK!”
19
* Only administrator can do
auto tests
11. TROUBLESHOOTING
Summary
11.1 “Unable to Connect” Appears
When this message appears, it means that the settings for the terminals and the computers are not properly done. Find out which method you are using to connect. Refer to
Chapter 3: Connection - Syncing Terminal to further understand the topic.
11.2 “Admin Affirm” Appears
You are not an administrator of this terminal. Only an authorized administrator of the system is allowed to access the Menu. Any attempt of normal user to access the Menu will
prompt “Admin Affirm” message on the screen. In case the administrator has resigned
from the company, kindly contact your authorized reseller to access the terminal.
11.3 The LED is Blinking All The Time
You have nothing to worry about unless the blinking light is red. The green light indicates
that terminal is on standby mode. Red blinking light may signal a problem in the terminal. Charge your terminals for a few hours to avoid the red light from blinking. Consult
your reseller for technical advice.
11.4 RFID Card Doesn’t Respond
Two possibilities for this problem
•
Have you registered the card to the terminal? The card must be registered to the
terminal before the terminal could read the information in the card. Refer to chapter 8 User, page 29 for card enrollment.
•
Have you assigned the user ID to the verification group that supports RFID card?
Without setting the terminal that you are under a group that supports RFID card, the
terminal wouldn’t read your card.
11.5 No Sound
A few things could cause this problem:
•
The terminal voice mode is silent
•
Perhaps someone has turned off the voice in your terminal or reduced its volume to
0%. Refer to Chapter 5 System to under Voice to rectify.
•
Speaker is damaged
•
Once you have rectified the voice mode and the problem persists, proceed to test
the voice. Go to Chapter 12 Auto Test to do the test. If no voice emitted, contact
your local reseller for support.
20
Appendix A:
SC403 Pinout
COM
NO
BUT
}
Door Sensor
GND
SEN
BELL +
Alarm
Ethernet
}
Lock
RJ45-3
RLED
RJ45-6
IWD 0
WD 0
Button
WD 1
GND
RXD
Bell
TXD
GND
+ 12V
GND
}
485 +
Power In
485 -
}
}
}
}
Output
GLED
IWD 1
}
}
BELL -
RJ45-2
BEEP
Wiegand Out
NC
}
}
RS 232
AL +
RJ45-1
RS 485
AL -
GND
+ 12V
}
}
Wiegand In
Power Out
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement