PENTAX KF Digital SLR Camera Guide

SLR Digital Camera

Start Guide

Model No. R06010

Thank you for purchasing the PENTAX KF digital camera.

This Start Guide provides information on how to get your PENTAX KF ready for use and its basic operations. To ensure proper operation, please read this Start Guide before using the camera.

For details on how to use the various shooting methods and settings, please refer to the

Operating Manual (PDF) posted on our website.

Refer to p.70 for details on the Operating Manual.

For Using Your Camera Safely

We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.

Warning

This symbol indicates that ignoring this item could cause serious personal injuries.

Caution

This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.

About the Camera

Warning

• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.

• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.

• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.

• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.

• If any irregularities occur during use, such as smoke or a strange odor, stop using the camera immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electric shock.

Caution

• Do not place your finger over the flash when discharging the flash. You may burn yourself.

• Do not cover the flash with clothing when discharging the flash.

Discoloration may occur.

• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.

• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.

• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.

About the Battery Charger and AC Adapter

Warning

• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.

• Do not disassemble or modify the product. This can cause a fire or electric shock.

• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electric shock.

• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock.

• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.

Continued use can cause damage to the product, fire or electric shock.

• Wipe off the power plug if it should become covered with dust.

Accumulated dust may cause a fire.

• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified

NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Caution

• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.

• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.

• Do not handle the power plug with wet hands. This can cause an electric shock.

• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.

• Do not use the battery charger D-BC186 to charge batteries other than the rechargeable lithium-ion battery D-LI109. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.

About the USB Power Adapter

Warning

• Wipe off the power plug if it should become covered with dust.

Accumulated dust may cause a fire.

• Do not handle the power plug with wet hands. This can cause an electric shock.

• Always grip the plug section when disconnecting the power plug. Do not pull the power cord. This can damage the power cord and result in a fire or electric shock.

• If the generation of smoke or strange odor from the adapter or other abnormality occurs, immediately remove the power plug from the outlet and contact your nearest dealer or service center for repair. Do not use the adapter until it is repaired.

• If you see a lightning flash or hear thunder during use of the adapter, do not touch the power plug. This can cause an electric shock.

Caution

• Securely insert the power plug into the outlet. Failure to observe this precaution may cause a fire.

About the Rechargeable Lithium-ion Battery

Warning

• If any leakage from the battery should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.

Caution

• Only use the specified battery with this camera. Use of other batteries may cause an explosion or fire.

• Do not disassemble the battery. Disassembling the battery may cause an explosion or leakage.

• Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal.

• Keep wires, hairpins, and other metal objects away from the contacts of the battery.

+

and

-

• Do not short the battery or dispose of the battery in fire. This can cause an explosion or fire.

• If any leakage from the battery should come in contact with skin or clothing, it may cause irritation to the skin. Wash the affected areas thoroughly with water.

• Precautions for D-LI109 Battery Usage:

- USE SPECIFIED CHARGER ONLY.

- DO NOT INCINERATE.

- DO NOT DISASSEMBLE.

- DO NOT SHORT CIRCUIT.

- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)

Keep the Camera and its Accessories out of the

Reach of Small Children

Warning

• Do not place the camera and its accessories within the reach of small children.

1. If the product falls or is operated accidentally, it may cause serious personal injuries.

2. Wrapping the strap around a neck may cause suffocation.

3. To avoid the risk of a small accessory such as the battery or memory cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an accessory is accidentally swallowed.

1

Checking the Contents of the Package

Hot shoe cover F

K

(Installed on camera)

Eyecup F

R

(Installed on camera)

Body mount cover

(Installed on camera)

Rechargeable lithium-ion battery D-LI109

Battery charger

D-BC186

USB power adapter

AC-U1 or AC-U2*

* Differs depending on the region.

Power plug USB cable

I-USB166

Strap

O-ST132

Software (CD-ROM)

S-SW186

Start Guide (this manual)

2

Lenses you can use

Lenses that can be used with this camera are DA, DA L, D FA, FA J, and FA lenses and lenses that have an 9 (Auto) position

on the aperture ring. To use any other lens or accessory, see p.49.

Contents

Checking the Contents of the Package ..............2

Names and Functions of the Working Parts ......5

Operating Controls ......................................................... 6

Monitor ........................................................................... 8

Viewfinder .................................................................... 11

Electronic Level ........................................................... 11

How to Change Function Settings .................... 12

Using the Direct Keys .................................................. 12

Using the Control Panel ............................................... 12

Using the Menus .......................................................... 14

Menu List ............................................................. 15

Rec. Mode Menus ........................................................ 15

Movie Menus ............................................................... 20

Playback Menu ............................................................ 21

Set-up Menus .............................................................. 22

Custom Setting Menus ................................................ 25

Getting Your Camera Ready for Use ................27

Attaching the Strap ...................................................... 27

Attaching a Lens .......................................................... 27

Charging the Battery .................................................... 28

Inserting/Removing the Battery ................................... 29

Inserting/Removing a Memory Card ............................ 29

Opening the Monitor .................................................... 30

Setting the Display Language and Date/Time ............. 30

Formatting a Memory Card .......................................... 32

Basic Shooting Operation .................................32

Shooting with the Viewfinder ....................................... 32

Shooting while Viewing the Live View Image .............. 34

Capture Modes for Still Pictures .................................. 34

Setting the Sensitivity .................................................. 37

Compensating the Exposure ........................................ 38

Recording Movies ........................................................ 38

Using the Built-in Flash ................................................ 39

Setting the Drive Mode ................................................ 40

Setting the White Balance ............................................ 41

Reviewing Images ..............................................42

Playing Back Movies .................................................... 43

Playback Mode Palette ................................................ 43

Sharing Images ................................................... 44

Enabling the Wi-Fi Function ......................................... 44

Operating the Camera with a Communication

Device .......................................................................... 45

Restrictions on Each Capture Mode .................46

Restrictions on the Combinations of Special

Functions ..................................................................... 48

Functions Available with Various Lenses ........49

Main Specifications ............................................50

Operating Environment for USB Connection and

Provided Software ........................................................ 56

Index .................................................................... 57

Care to be Taken During Handling .................... 60

WARRANTY POLICY ..........................................65

Information on the Operating Manual ...............70

There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual ones.

3

Regarding copyrights

Images taken with this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.

Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display.

Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.

4

To users of this camera

• Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation.

• The liquid crystal panel used for the monitor is manufactured using extremely high precision technology.

Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not light up or may light up when they should not.

However, this has no effect on the recorded image.

• In this manual, the generic term “computer(s)” refers to either a Windows PC or a Macintosh.

• In this manual, the term “battery(ies)” refers to any type of batteries used for this camera and its accessories.

Regarding User Registration

In order to better serve you, we request that you complete the user registration on our website.

Thank you for your cooperation.

https://www.ricoh-imaging.com/registration/

Names and Functions of the Working Parts

Speaker

Built-in flash

AF assist light

Hot shoe

Microphone

Image plane indicator

Strap lug

Mirror

Microphone/cable release terminal

Lens mount index

Remote control receiver

Lens unlock button

Lens information contacts

AF coupler

Diopter adjustment lever

Viewfinder

Vari-angle monitor

Microphone

Strap lug

Card access lamp

Card slot for SD

Memory Card

HDMI terminal (type D)

Terminal cover

USB terminal (micro B)

Battery cover

Connection cable cover

Battery cover unlock lever

Tripod socket

5

6

9

0 a b

Operating Controls

1

2

3

4

5

6

7 c d e f g h

8

1 EV Compensation button ( J )

Press to change the exposure compensation value. (p.38)

In playback mode, press to save the last JPEG image taken also in RAW format.

2 Green button ( M )

Resets the value being adjusted.

3 Shutter release button ( 0 )

Press to capture images. (p.33)

In playback mode, press halfway to switch to capture mode.

4 Main switch

Turns the power on or off, or switches to C (movie) mode.

(p.38)

When the camera is turned on, it enters A (still picture) mode and the indicator lamp lights green. When the switch is turned to C , the camera enters C mode and the lamp lights red.

5 Front e-dial ( Q )

Changes the values for camera settings such as exposure.

(p.36)

You can change the menu category when a menu screen is

displayed. (p.14)

In playback mode, use this to select a different image.

6 Flash pop-up button ( 1 )

Press to pop up the built-in flash. (p.40)

7 RAW/Fx1 button ( X )

You can assign a function to this button.

By default, the function that temporarily changes the file format (One Push File Format) is assigned.

8 Focus mode switch

Changes the focus method. (p.32)

9 Live View/Delete button ( K / L )

Displays the Live View image. (p.34)

In playback mode, press to delete images. (p.42)

0 Rear e-dial ( R )

Changes the values for camera settings such as exposure.

(p.36)

You can change the menu tabs when a menu screen is

displayed. (p.14)

You can change camera settings when the control panel is

displayed. (p.12)

In playback mode, use this to magnify the image or display

multiple images at the same time. (p.42)

a Four-way controller ( ABCD )

Displays the Sensitivity, White Balance, Flash Mode or

Drive Mode setup menu. (p.12)

When a menu or the control panel is displayed, use this to move the cursor or change the item to set.

Press B in single image display of the playback mode to

display the playback mode palette. (p.43)

b INFO button ( G )

Changes the style of the display on the monitor. (p.8, p.10)

c Mode dial

Changes the capture mode. (p.33, p.34)

d Wi-Fi/Fx2 button ( Y )

You can assign a function to this button.

In playback mode, press to turn the Wi-Fi function on or off.

(p.44)

e AF/AE Lock button ( f )

Available for adjusting focus, instead of pressing 0 halfway, and for locking the exposure value before shooting.

f Playback button ( 3 )

Switches to playback mode. (p.42) Press the button again to

switch to capture mode.

g OK button ( E )

When a menu or the control panel is displayed, press this button to confirm the selected item.

Press and hold this button when [AF Active Area] is set to

9 or 8 , or to 0 or h to switch the function of the arrow keys to the AF area change mode or the direct key operation mode.

h MENU button ( F )

Displays a menu. Press this button while the menu is

displayed to return to the previous screen. (p.14)

About the Four-way Controller

In this manual, each button of the fourway controller is indicated as shown in the illustration on the right.

7

8

Monitor

Capture Mode

With this camera, you can take pictures while looking through the viewfinder or while viewing the image on the monitor.

When using the viewfinder, you can take pictures while checking the status screen displayed on the monitor and looking

through the viewfinder. (p.32) When not using the viewfinder,

you can take pictures while viewing the Live View image

displayed on the monitor. (p.34)

The camera is in “standby mode” when it is ready to shoot, such as when the status screen or Live View image is displayed.

Press G in standby mode to display the “control panel” and

change settings. (p.12) You can change the type of information

displayed in standby mode by pressing G while the control panel is displayed.

G

Standby mode

(Status screen)

Control panel

G

FF 5.6

1600

Shooting Info Display selection screen

Status Screen

FF

250

5.6

12

1 2 3

13

4 5 6 7 8 9 10

15

12 14

15

18 19 20

12

12 16

22

2526 27

17

23

28

24

21

18 20 21

29

11

+1.0

99999

1 Capture mode

2 AE Lock

3 Focus Method

4 Custom Image

5 Clarity/Skin Tone/Digital

Filter/HDR Capture/Pixel

Shift Resolution

6 AA Filter Simulator

7 GPS positioning status tuning

8 Wi-Fi connection status 24 External Input Devices

9 AE Metering

10 Shake Reduction/

25

26

File Format

Memory card

11

12 E-dial guide

13

14

15 Sensitivity

16

Horizon Correction

Battery level

Shutter speed

Aperture value

EV Compensation/

Bracketing

17 EV bar scale

18 Flash Mode

19 Focusing area (AF point)

20 Drive Mode

21 White Balance

22 Flash Exposure

23

Compensation

White Balance fine-

27 Number of recordable still pictures/Movie recordable time

28 Number of shots during

Multi-exposure or

Interval Shooting

29 Operation guide

Live View

1 2 3 4 5 6 7 8 9 10

11

12

13

14

20

15

16

+1.7

EV

21 22 23 24

±0EV

9999

25 26

17

18

19

27

1 Capture mode

2

4

5 Custom Image

6

Flash Mode

3 Drive Mode

White Balance

Clarity/Skin Tone/Digital

Filter/HDR Capture/Pixel

Shift Resolution

16

17

Electronic Level (vertical tilt)

EV Compensation

18 EV bar scale

19 Operation guide, and number of shots during

Multi-exposure or

Interval Shooting

7 Wi-Fi connection status 20 AE Lock

8 AE Metering

9 Shake Reduction/

21

22

Shutter speed

Aperture value

23 Sensitivity Horizon Correction/

Movie SR

10 Battery level

24

25

File Format

Memory card

11

12

13

External Input Devices

GPS positioning status

Temperature warning

14 Histogram

15 Electronic Level

(horizontal tilt)

26 Number of recordable still pictures/Movie recordable time

27 Face detection frame

(when [AF Active Area] is set to [Face Detection])

9

10

Control Panel

A mode

Custom Image

Bright

5

10

15

20

6

1

2

11

16

21

28

7

12

17

22

8

13

18

23

29

3 4

9

14

19

24

30

C mode

1 Function name

2 Setting

3 Memory card

4 Number of recordable still pictures/Movie recordable time

5 Outdoor View Setting

6 Custom Image

7 Highlight Correction

8 Shadow Correction

9 High-ISO NR

10 Clarity

11 Skin Tone

12 Digital Filter

13 HDR Capture

14 Pixel Shift Resolution

5

15

21

6

1

2

16

26

7

17

27

8

18

23

3 4

12

25

28 29 30

15 AF Mode

16 AF Active Area

17 AF Assist Light

18 AE Metering

19 AA Filter Simulator

20 File Format

21 JPEG Recorded Pixels/

Movie Recorded Pixels

22 JPEG Quality

23 Shake Reduction/Movie

SR

24 Horizon Correction

25 External Input Devices

26 Framerate

27 Recording Sound Level

28 Current date and time

29 Destination 30 Operation guide for the control panel customization

Playback Mode

The captured image and shooting information are displayed in single image display of the playback mode.

Press G to change the type of information displayed in single image display.

G

Single image display

(Standard Information Display)

Playback Info Display selection screen

Viewfinder

1

2 3

1

4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 19

1 AF frame

2 Spot metering frame

3 AF point

4 Flash indicator

5 Focus Method

6 Shutter speed/Exposure time for timed exposure in M mode/Number of shots for Bracketing

7 Aperture value/Bracket value for Bracketing

8

Focus indicator (p.33)

9 EV bar scale/Electronic

Level

10 ISO/ISO AUTO

11 Sensitivity/Exposure compensation value

12 AE Lock

13 Change AF Area

14 Multi-exposure

15 AE Metering

16 Shake Reduction

17 Flash Exposure

Compensation

18 EV Compensation/

Bracketing

19 File Format t

Memo

• You can adjust the viewfinder image sharpness using the diopter adjustment lever. If it is difficult to move the diopter adjustment lever, lift up and remove the eyecup.

Adjust the diopter setting until the

AF frame in the viewfinder looks sharp and clear.

Electronic Level

You can check whether the camera is tilted by displaying electronic levels. The electronic level for the horizontal camera angle can be displayed in the viewfinder, and the electronic levels for the vertical and horizontal camera angles can be

displayed on the Live View screen. (p.9)

11

12

How to Change Function Settings

Using the Direct Keys

Press ABCD in standby mode.

A Sensitivity

B White Balance

C Flash Mode

D Drive Mode

p.37

p.41

p.39

p.40

Using the Control Panel

Press G in standby mode.

Use ABCD to select an item.

Use R to change settings.

Press E to make detailed settings.

Press F to cancel the setting operation.

Press E to confirm the selected item and return to the control panel.

Customizing the Control Panel

The functions displayed on the control panel can be customized.

Some functions in the A , C , and D menus can be saved on

the control panel. Refer to “Menu List” (p.15) for details on the

functions that can be saved.

1

Press

G

in standby mode.

The control panel appears.

2

Press

J

.

The customization screen appears.

3

Use

ABCD

to select the function to change.

Press M to reset to the default settings.

Select the location of the item you want to change

7

Press

J

.

The control panel reappears.

8

Press

F

.

The camera returns to standby mode.

4

Press

E

.

Selectable functions are displayed in the pop-up menu.

5

Use

AB

to select the function to save.

Select [--] if you do not want to save any function.

Outdoor View Setting

Custom Image

6

Press

E

.

The screen of Step 3 reappears.

13

14

Using the Menus

Menu tabs

3

Clarity

Skin Tone

Digital Filter

HDR Capture

Pixel Shift Resolution

ASTROTRACER

1

AF Assist Light

AE Metering

Use

Use

Q

AB

to change the menu category.

to select an item.

Use R to switch between menu tabs.

Press F to exit the menu screen.

Press D to display the pop-up menu.

1

AF Assist Light

AE Metering

Press D to display the submenu.

3

Clarity

Skin Tone

Digital Filter

HDR Capture

Pixel Shift Resolution

ASTROTRACER

Use AB to select an item.

Press F to cancel the pop-up menu.

Press E to confirm the selected item.

AF Active Area

Focus Peaking

Press F to return to the previous screen.

Menu List

Rec. Mode Menus

Menu

A 1

Custom Image

Scene Mode

AF with

Viewfinder

AF with

Live View

1st Frame Action in

AF.C

AE Metering

Item

*1 *2

*1 *3

AF Mode

*1

Exposure Mode

*4

*1

AF Active Area

AF.S Setting

Action in AF.C Cont.

Hold AF Status

AF Active Area

Focus Peaking

AF.S Setting

AF Assist Light

*1

*1

*1

*1

Function

Sets the image finishing tone such as color and contrast before shooting an image.

Selects the scene mode that best suits the situation. ( S mode)

Selects the AF mode for shooting with the viewfinder.

Selects the area to adjust the focus for shooting with the viewfinder.

Sets the action priority for when the autofocus mode is set to x and 0 is fully pressed.

Sets the action priority for the first frame when the autofocus mode is set to y and 0 is fully pressed.

Sets the action priority during Continuous Shooting when the autofocus mode is set to y .

Maintains the focus for a certain amount of time when the subject happens to move out of the selected focusing area after being focused.

Selects the area to adjust the focus for shooting with Live View.

Emphasizes the outline of the subject in focus and makes it easier to check the focus.

Sets the action priority for when 0 is fully pressed.

Discharges the assist light when autofocusing in dark locations.

Selects the part of the sensor to use for measuring brightness and determining the exposure.

Temporarily changes the exposure mode when the mode dial is set to one of the modes from O to Q .

Default Setting

Bright

Portrait z

Auto

(11 AF Points)

Focus-priority

Auto

Auto

Low

Face Detection

Off

Focus-priority

On

Multi-segment

–

15

16

Menu

A 2

Image

Capture

Settings

D-Range

Settings

Item

File Format

*1

JPEG Recorded

Pixels

*1

JPEG Quality

*1

RAW File Format

Color Space

Highlight

Correction *1

Shadow

Correction *1

Slow Shutter Speed

NR *1

Noise

Reduction

High-ISO NR *1

A 3

Clarity *1

Skin Tone *1

Digital Filter *1

HDR Capture *1

Pixel Shift Resolution

ASTROTRACER *1

*1

Function

Sets the file format of images.

Sets the recording size of JPEG images.

Sets the quality of JPEG images.

Sets the RAW file format.

Sets the color space to use.

Expands the dynamic range and prevents overexposed areas from occurring.

Expands the dynamic range and prevents underexposed areas from occurring.

Sets the Noise Reduction setting when shooting with a slow shutter speed.

Sets the Noise Reduction setting when shooting with a high ISO sensitivity.

Changes the clarity of images using an image processing program.

Enhances the skin tone of the subject in the image using an image processing program.

Applies a digital filter effect when taking pictures.

Sets the type of high dynamic range shooting.

Merges four images shifted pixel by pixel and outputs a highdefinition image.

Makes settings to track and capture celestial bodies.

Default Setting

JPEG q m

PEF sRGB

Auto

Auto

Auto

Auto

±0

Off

No Filter

Off, ±2EV, On

Off

Off

Menu Item

A 4

AA Filter Simulator

*1

Shake Reduction

*1

Horizon Correction

*1

Lens

Correction

Distortion

Correction *1

Peripheral Illumin.

Corr. *1

Lat-Chromatic-Ab

Adj *1

Diffraction

Correction *1

Input Focal Length

*1

A 5

Viewfinder

Overlay

Electronic Level

*1

Superimpose AF

Area

Live View

Grid Display

*1

Electronic Level

*1

Histogram Display

Highlight Alert

Flicker Reduction

Function

Applies a low-pass filter effect using the Shake Reduction mechanism.

Activates the Shake Reduction function.

Corrects horizontal tilt when in A mode.

Reduces distortions occurring due to lens properties.

Reduces peripheral light fall-off occurring due to lens properties.

Reduces lateral chromatic aberrations occurring due to lens properties.

Corrects blur caused by diffraction when using a small aperture.

Sets the focal length when using a lens of which focal length information cannot be obtained.

Displays the electronic level at the bottom of the viewfinder.

Displays the active AF point in red in the viewfinder.

Sets the type and color of the grid lines displayed during Live View.

Displays the electronic level during Live View.

Displays the histogram during Live View.

Sets overexposed areas to blink red during Live View.

Cuts down on the Live View screen flicker by setting the power frequency.

Default Setting

Off

On

Off

Off

Off

On

On

35mm

Off

On

Off, Black

On

Off

Off

50Hz

17

18

Menu

A 5

Instant

Review

Other

Display

Settings

Button

Customization

Item

Display Time

Zoom Review

Save RAW Data

Delete

Histogram Display

Highlight Alert

Guide Display

Display Color

Fx1 Button

Fx2 Button

AF/AE-L Button

G

H

E-Dial

Programming

I

J

K

L

Rotation

Direction

Function

Sets the Instant Review display time.

Displays the magnified image during Instant Review.

Saves the RAW data during Instant Review.

Deletes the displayed image during Instant Review.

Displays the histogram during Instant Review.

Sets overexposed areas to blink red during Instant Review.

Displays operation guides when the capture mode is changed.

Sets the display color of the status screen, control panel, and menu cursor.

Sets the function for when

Sets the function for when

Sets the function for when

Sets the Q / R / M

X

Y

is pressed.

is pressed.

f is pressed.

operation for each exposure mode.

Reverses the effect obtained when Q or R is turned.

Default Setting

1sec.

On

On

On

Off

Off

On

1

One Push

File Format

Wi-Fi

Enable AF1

I , J , X G

–, ISO, –

I , –, –

–, J , –

I , J , G LINE

I , J , G LINE

Rotate Right

Menu Item

Sensitivity

EV Compensation

Flash Mode

Flash Exposure Comp.

Drive Mode

White Balance

Function Default Setting

On

On

On

On

On

On

Memory

Custom Image

Clarity

Skin Tone

Digital Filter

Determines which settings to save when the power is turned off.

On

Off

Off

Off

A 5

HDR Capture

Pixel Shift Resolution

Shooting Info Display

Playback Info Display

Off

Off

Off

On

Off Outdoor View Setting

Night Vision LCD

Display

Off

Save

USER

Mode

Save Settings

Rename USER Mode

You can save frequently used capture settings to O to Q of the mode dial.

CLEAR TONE,

HDR LANDSCAPE,

ASTROPHOTO

Changes the names of the saved USER modes to display on the monitor.

CLEAR TONE,

HDR LANDSCAPE,

ASTROPHOTO

Check Saved Settings Displays the settings saved in USER modes.

Reset USER Mode Resets all the settings saved in USER modes to the defaults.

*1 Available as a function in the control panel.

*2 The function appears in modes other than S mode.

*3 The function appears in S mode.

*4 The function appears only in O to Q modes.

–

19

20

Movie Menus

Menu Item

Custom Image *1

AF with

Live View

AF Mode

AF Active Area

*1

C 1

Focus Peaking *1

AF Assist Light

*1

AE Metering

*1

C 2

Movie

Capture

Settings

Recorded Pixels

Framerate

*1

Recording Sound Level

*1

D-Range

Settings

Highlight

Correction *1

Shadow

Correction *1

Digital Filter *1

*1

Movie SR

*1

Grid Display

*1

Live View

Electronic Level

*1

Histogram Display

Highlight Alert

Flicker Reduction

Function

Sets the image finishing tone such as color and contrast before shooting an image.

Selects the AF mode for movie recording.

Selects the area to adjust the focus for movie recording.

Emphasizes the outline of the subject in focus and makes it easier to check the focus.

Discharges the assist light when autofocusing in dark locations.

Selects the part of the sensor to use for measuring brightness and determining the exposure.

Sets the number of recorded pixels of the movie.

Default Setting

Bright x

Multiple AF Points

Off

On

Multi-segment u

30p

Auto

Sets the framerate of the movie.

Sets the sound level for recording.

Expands the dynamic range and prevents overexposed areas from occurring.

Expands the dynamic range and prevents underexposed areas from occurring.

Applies a digital filter effect when recording a movie.

Activates the Shake Reduction function.

Sets the type and color of the grid lines displayed during Live View.

Displays the electronic level during Live View.

Displays the histogram during Live View.

Sets overexposed areas to blink red during Live View.

Cuts down on the Live View screen flicker by setting the power frequency.

Auto

Auto

No Filter

On

Off, Black

On

Off

Off

50Hz

Menu Item

AF/AE-L Button m

C 2

Button

Customization

E-Dial

Programming n p o

Rotation

Direction

*1 Available as a function in the control panel.

Function

Sets the function for when f is pressed.

Sets the Q / R / M operation for each exposure mode.

Reverses the effect obtained when Q or R is turned.

Playback Menu

Default Setting

Enable AF1

–, –, –

–, J , G LINE

I , J , G LINE

I , J , G LINE

Rotate Right

Menu

B 1

Slideshow

LCD

Display

Item

Display Duration

Function

Sets an image display interval.

Screen Effect

Repeat Playback

Sets a transition effect when the next image is displayed.

Starts a slideshow again from the beginning after the last image is displayed.

Auto Movie Playback Plays back movies during a slideshow.

Protect All Images

Delete All Images

Quick Zoom

Playback Sound Volume

Auto Image Rotation

Grid Display

Highlight Alert

Protects all stored images at once.

Deletes all stored images at once.

Sets the initial magnification when magnifying images.

Sets the sound volume during movie playback.

Rotates images which were captured with the camera held vertically or of which the rotation information has been changed.

Sets the type and color of grid lines.

Sets overexposed areas to blink red in Standard Information

Display, Histogram Display, and No Information Display of the playback mode.

Default Setting

3sec.

Off

Off

On

–

–

Off

10

On

Off, Black

Off

21

22

Set-up Menus

Menu Item

Language/ W

Date Adjustment

World Time

Text Size

Volume

In-focus

AE-L

D 1

Self-timer

Remote Control

Sound

Effects

Mirror Up

Change AF Area

One Push File

Format

Wi-Fi

Night Vision LCD

Display

Electronic Level

Function

Changes the display language.

Sets the date and time and the display format.

Switches between the date and time display of your hometown city and that of a specified city.

Magnifies the text size when selecting a menu item.

Sets the sound volume of beep sounds.

Sets whether to make a beep sound when the subject is focused.

Sets whether to make a beep sound when the exposure value is locked with f .

Sets whether to make a beep sound during the countdown for Selftimer shooting.

Sets whether to make a beep sound during the countdown for

Remote Control shooting.

Sets whether to make a beep sound during Mirror Lock-up

Shooting.

Sets whether to make a beep sound when the function of the arrow keys ( ABCD ) is switched to the AF area change mode.

Sets whether to make a beep sound when the One Push File

Format function is turned on with X or Y .

Sets whether to make a beep sound when the Wi-Fi function is turned on or off with X or Y .

Sets whether to make a beep sound when the Night Vision LCD

Display is turned on or off with X or Y .

Sets whether to make a beep sound when the Electronic Level display is turned on or off with X or Y .

Default Setting

English

01/01/2022

Hometown

Std.

3

On

On

On

On

On

On

On

On

On

On

Menu

D 2

Wi-Fi *1

Item

LCD Display Settings

Outdoor View Setting

Night Vision LCD Display

*1

Indicator

Lamps

Other Indicator

Lamps

Self-timer

Remote Control

GPS LED Indicators

Function

Sets the brightness, saturation, and color adjustment of the monitor.

Adjusts the brightness of the monitor for outdoor shooting.

Changes the monitor display color to red for shooting in a dark place such as night-time shooting.

Sets the brightness of the main switch lamp when the camera is turned on.

Sets whether to make the self-timer lamp blinking during the countdown for the drive mode [Self-timer (12 sec.)].

Sets whether to make the remote control receiver lamp blinking during the standby time for the drive mode [Remote Control].

Sets whether to light up the GPS unit lamps when the GPS unit is attached.

Activates the Wi-Fi function.

Automatically adjusts the date and time settings.

GPS/E-

Compass

GPS Time Sync

Calibration

D 3

USB Connection

HDMI Out

External Input Devices

Auto Power Off

*1

Performs a calibration of direction information.

Sets the USB connection mode when connecting to a computer with a commercially available USB cable.

Sets the output format when connecting to an AV device with an

HDMI input terminal.

Sets the external input device connected to the microphone/cable release terminal.

Sets the time until the camera turns off automatically if no operations are made for a certain period of time.

Default Setting

0

Off

Off

High

On

On

On

Off

On

–

MSC

Auto

Auto Select

1min.

23

24

Menu

D 4

Create New Folder

Folder Name

File Name

Item

File No.

Sequential

Numbering

Reset File Number

Copyright Information

Format

Pixel Mapping

Dust Removal

Sensor Cleaning

D 5 Certification Marks

Firmware Info/Options

Reset

*1 Available as a function in the control panel.

Function

Creates a new folder on the memory card.

Sets the folder name in which images are stored.

Sets the file name assigned to an image.

Continues the sequential numbering for the file name when a new folder is created.

Resets the file number setting and returns to 0001 each time a new folder is created.

Sets the photographer and copyright information embedded in the

Exif data.

Formats a memory card.

Maps out and corrects defective pixels on the sensor.

Cleans the sensor by applying high-frequency (ultrasonic) vibrations.

Locks the mirror in the up position for cleaning the sensor with a blower.

Displays the certification marks of conformance to wireless technical standards.

Displays the camera’s firmware version. You can check the current firmware version before running an update.

Resets the settings of the direct keys and for the items of the A menus, C menus, B menu, D menus, control panel, and playback mode palette.

Default Setting

–

Date

IMGP, _IMG

On

–

Off

–

–

Off, Off

–

–

–

–

Custom Setting Menus

Menu

E 1

Item

1 EV Steps

2 Sensitivity Steps

3 Meter Operating Time

4 Auto EV Compensation

5 Link AE and AF Point

6 AE-L with AF Locked

7 Bulb (B) Mode Options

8 Release While Charging

9 AF with Remote Control

10 Bracketing Order

11 One-Push Bracketing

E 2

12 Interval Shooting Options

13 AF in Interval Shooting

14 WB Adjustable Range

Function

Sets the adjustment steps for the exposure.

Sets the adjustment steps for the ISO sensitivity.

Sets the meter operating time.

Automatically compensates the exposure when the correct exposure cannot be achieved with the current settings.

Sets whether to link the exposure value and the AF point in the focusing area.

Sets whether to lock the exposure value when the focus is locked.

Sets the camera operation when 0 is pressed in M mode.

Sets whether to release the shutter while the built-in flash is being charged.

Sets whether to use autofocus when shooting with a remote control unit.

Sets the order for Bracketing shooting.

Shoots all frames with one press of the release in Bracketing.

Sets whether to start counting the time of interval from when exposure starts or when exposure ends for Interval Shooting,

Interval Composite, and Interval Movie Record.

Sets whether to lock the focus position used when the first picture is taken or perform autofocus for each exposure for Interval

Shooting, Interval Composite, Interval Movie Record, and Star

Stream.

Sets whether to automatically fine-tune the white balance when the light source is specified for the white balance setting.

Default Setting

1/3 EV Steps

1 EV Step

10sec.

Off

Off

Off

Type1

Off

Off

0 - +

Off

Interval

Locks focus at

1st exposure

Fixed

25

26

Menu Item

15 AWB in Tungsten Light

16 WB When Using Flash

17 Color Temperature Steps

E 3

18 4-way Controller Settings

E 4

19 Auto SR Off

20 Save Rotation Info

21 Save Menu Location

22 Catch-in Focus

23 AF Fine Adjustment

24 Using Aperture Ring

Reset Custom Functions

Function

Sets the tungsten light color tone when the white balance is set to

[Auto White Balance].

Default Setting

Strong Correction

Sets the white balance setting when using a flash.

Auto White

Balance

Sets the adjustment steps for the Color Temperature option of the white balance.

Selects the operation of the arrow keys ( ABCD ) when the focusing area selection mode is set to one of some select-type options.

Automatically turns off the Shake Reduction function when the drive mode is set to [Self-timer] or [Remote Control].

Saves rotation information when shooting.

Saves the last menu tab displayed on the monitor and displays it again the next time F is pressed.

Enables Catch-in Focus shooting when a manual focus lens is attached. The shutter is released automatically when the subject comes into focus.

Allows you to precisely fine-tune your lenses with the camera’s autofocus system.

Enables the shutter to release when the lens aperture ring is set to a position other than 9 (Auto).

Resets the settings of the Custom Setting menus to the defaults.

Kelvin

Type1

Enable Auto

SR Off

On

Reset Menu

Location

Off

Off

Disable

–

Getting Your Camera Ready for Use

Attaching the Strap

1

Pass the end of the strap through the strap lug and secure it on the inside of the clasp.

2

Attach the other end in the same manner.

Attaching a Lens

1

Make sure that the camera is turned off.

2

Remove the body mount cover (

1

) and lens mount cover (

2

).

After removing the cover, be sure to put the lens down with the lens mount side facing upward.

3

Align the lens mount indexes (red dots:

3

) on the camera and the lens, and secure by turning the lens clockwise until it clicks.

3

3

To remove the lens

Attach the lens cap, and then turn the lens counterclockwise while pressing the lens unlock button

( 4 ).

4 u

Caution

• When a retractable lens is attached and is not extended, you cannot take pictures or use some functions. If the lens is retracted during shooting, the camera stops working. Refer to

Step 2 of “Shooting with the Viewfinder” (p.32) for details.

27

28

Charging the Battery

1

Insert the power plug to the USB power adapter until it clicks.

2

Connect the USB cable to the USB power adapter.

3

Plug the USB power adapter into the power outlet.

3

2

4

Set the battery to the battery charger while aligning the + and - terminals of each.

5

Connect the USB cable to the USB terminal.

5

The indicator lamp lights while charging and turns off when the battery is fully charged.

(Approximate charging time: 2 hours and 30 minutes)

4

Inserting/Removing the Battery

1

Open the battery cover.

Slide the battery cover unlock lever ( 1 ) before opening the cover.

2

Face the

A

mark on the battery towards the outside of the camera, and insert the battery until it locks into place.

To remove the battery, push the battery lock lever in the direction of 2 .

3

Close the battery cover.

1

2

Inserting/Removing a Memory Card

1

Make sure that the camera is turned off.

2

Slide the memory card cover in the direction of

1

and then rotate it to open as shown by

2

.

1

2

3

Insert a card all the way into the memory card slot with the memory card label facing toward the side with the monitor.

Push the memory card in once and release to remove.

4

Rotate the memory card cover as shown by

3

, and slide it in the direction of

4

.

4

3

29

30

Opening the Monitor

1

Open and rotate the monitor 180° to the left while holding the top and bottom of it.

2

Rotate the monitor 180° backward.

The monitor can also be rotated up to 90° forward.

3

Close the monitor on the camera so that the LCD screen can be seen.

Setting the Display Language and Date/Time

1

Turn the main switch to

[ON].

The lamp lights up in green.

The [Language/ W ] screen appears.

2

Use

ABCD

to select the desired language and press

E

.

The [Initial Setting] screen appears in the selected language.

Proceed to Step 7 if F

(Hometown) does not need to be changed.

3

Press

B

to move the frame to

F

and press

D

.

The [ F Hometown] screen appears.

4

Use

CD

to select a city.

Use R to change the region.

5

Press

B

to select [DST] (daylight saving time), and use

CD

to select

Y

or

Z

.

6

Press

E

.

The camera returns to the [Initial Setting] screen.

7

Press

B

to select [Text Size] and press

D

.

8

Use

AB

to select [Std.] or

[Large], and press

E

.

Selecting [Large] increases the text size of the selected menu items.

9

Press

B

to select [Settings complete] and press

E

.

The [Date Adjustment] screen appears.

10

Press

D

, and use

AB

to select the date format.

11

Press

D

, and use

AB

to select [24h] or [12h].

12

Press

E

.

The frame returns to [Date Format].

13

Press

B

, and then press

D

.

The frame moves to the month if the date format is set to [mm/dd/yy].

14

Use

AB

to set the month.

Set the day, year, and time in the same manner.

15

Press

B

to select

[Settings complete] and press

E

.

The [LCD Display] screen appears.

16

Use

CD

to select a color.

Select the display color of the status screen, control panel, and menu cursor from colors

1 to 12.

17

Press

E

.

The camera switches to capture mode and is ready to take a picture.

31

32

Formatting a Memory Card

1

Press

F

.

The A 1 menu appears.

2

Use

Q

or

R

to display

D

4 menu.

3

Use

AB

to select [Format] and press

D

.

The [Format] screen appears.

4

Press

A

to select [Format] and press

E

.

Formatting starts. When formatting is completed, the D 4 menu reappears.

Format

Cancel

D

4

5

Press

F

.

The camera switches to capture mode and is ready to take a picture.

Basic Shooting Operation

Shooting with the Viewfinder

1

Remove the front lens cap by pushing the top and bottom portions as indicated in the illustration.

2

When a retractable lens is attached, turn the zoom

3

ring in the direction of

2

while pressing the button

2

on the ring (

1

).

When retracting the lens, turn the zoom ring in the opposite direction to 2 while pressing the

1 button on the ring and align the white dot to the position 3 .

3

Set the focus mode switch to

v

.

4

Turn the mode dial and align the dial indicator to

R

.

Dial indicator

The selected capture mode is displayed on the monitor (Guide

Display).

FF

250

5.6

5

Look through the viewfinder to view the subject.

When using a zoom lens, turn the zoom ring to the right or left to change the angle of view.

6

Position the subject inside the AF frame and press

0

halfway.

Focus indicator

7

Press

0

fully.

The captured image is displayed on the monitor (Instant

Review).

Available operations during Instant Review

L Deletes the image.

R to the right

J

Magnifies the image.

Saves the RAW data (only when a

JPEG image was taken and the data remains in the buffer).

33

34

Shooting while Viewing the Live View Image

1

Press

K

in Step 5 of

“Shooting with the

Viewfinder” (p.32).

The Live View image is displayed on the monitor.

2

Position the subject inside the AF frame on the monitor and press

0

halfway.

AF frame

Available operations

E

K

Magnifies the image.

Use R to change the magnification (up to

16×).

Use ABCD to change the area to display.

Press M to return the display area to the center.

Press E to return to 1× image display.

Exits shooting with Live View.

Subsequent steps are the same as shooting with the viewfinder.

Capture Modes for Still Pictures

Capture Mode

R

(Auto Picture modes)

S

(Scene modes)

G , H , I , J ,

K , L , M

(Exposure modes)

O

(CLEAR TONE)

P

(HDR

LANDSCAPE)

Function

Automatically selects the optimal capture mode from a

(Standard), b (Portrait), c

(Landscape), d (Macro), e

(Moving Object), f (Night

Scene Portrait), g (Sunset), h

(Blue Sky), or i (Forest).

Offers you various scene modes to choose from.

Allows you to change the shutter speed, aperture value, and sensitivity.

Creates a clear and bright atmosphere in pictures.

Gives a bold and dramatic look to landscape shots.

Q

(ASTROPHOTO)

Adjusts the background black level and reproduces the colors of stars faithfully.

Page

p.32

p.35

p.36

– t

Memo

• The functions that can be set vary depending on the capture

mode. Refer to “Restrictions on Each Capture Mode” (p.46)

for details.

• You can save frequently used exposure modes and capture settings as USER modes to O to Q and replace the preset settings with them.

Scene Modes

1

Set the mode dial to

S

.

The scene mode selection screen appears.

2

Select a scene mode.

For capturing portraits.

Reproduces a healthy and bright skin tone b c Landscape d e f g h i

Portrait

Macro

Moving

Object

Night

Scene

Portrait

Sunset

Blue Sky

Forest

For capturing portraits. Reproduces a healthy and bright skin tone.

For capturing landscape views.

Reproduces the vivid green of trees.

For capturing tiny objects at close focus range like flowers, coins, jewelry, and more.

For capturing images of fast moving subjects.

For capturing images of people in low light conditions, such as dusk or at night.

For capturing sunrises or sunsets in beautiful, vivid color.

For capturing images of blue sky.

Produces a more impressive deep blue.

Enhances colors of trees and sunbeams through foliage and produces a vivid color image.

j

Night

Scene

Used for shooting at night.

k l m

Night

Scene HDR

Night Snap

Food

Takes three consecutive images at three different exposure levels (-1, ±0,

+1) to create a single composite image from them.

For taking snapshots in poorly lit places.

For capturing images of food.

Saturation will be rather high to make food look appetizing.

o p u

Pet

Kids

For capturing moving pets.

For capturing moving kids.

Reproduces healthy and bright skin tone.

q

Surf &

Snow

For capturing images of dazzling backgrounds, such as snowy mountains.

s

Backlight

Silhouette

Produces a silhouette image of the subject in backlight conditions.

t Candlelight For capturing scenes in candlelight.

Stage

Lighting

For capturing moving subjects in poorly lit places.

v Museum

For capturing images in places where a flash is prohibited.

3

Press

E

.

The camera is in standby mode.

Turn R to change the scene mode.

35

36

Exposure Modes

Mode x : Available #: Restricted

×

: Not available

Change

Shutter

Speed

Change

Aperture

Value

Change

Sensitivity

EV

Compensation

G

Program Automatic

Exposure

H

Sensitivity Priority

Automatic Exposure

I

Shutter Priority

Automatic Exposure

J

Aperture Priority

Automatic Exposure

K

Shutter & Aperture

Priority Automatic

Exposure

L

Manual Exposure

M

Bulb Exposure

#

×

×

×

*1

x x x

*4

#

×

×

*1

x x x x x x x x

× x x

*2

*3

*2

*2

x x x x x x

×

*1 You can set the value to change in [E-Dial Programming] of [Button

Customization] in the A 5 menu.

*2 [ISO AUTO] is not available.

*3 Fixed to [ISO AUTO].

*4 When the timed exposure is enabled, shutter speeds ranging from 10 seconds to 20 minutes can be set.

1

Set the mode dial to the desired exposure mode.

Q or R appears on the status screen for the value that can be changed.

FF

30

4.5

100

The value that can be changed is underlined in the viewfinder.

During Live View, D appears for the value that can be changed.

2

Turn

R

.

The aperture value is changed in

J , K , L , or M mode.

The sensitivity is changed in H mode.

3

Turn

Q

.

The shutter speed is changed in

I , K , or L mode.

Bulb Exposure

1

Set the mode dial to

M

.

2

Use

R

to set the aperture value.

8.0

1600

3

To enable the timed exposure, press

M

, and then use

Q

to set the exposure time.

You can set the exposure time within the range from 10" to

20'00".

4

Press

0

.

While 0 is pressed, exposure continues.

If the timed exposure is enabled in Step 3, the exposure ends when the set exposure time elapses after 0 is fully pressed.

Setting the Sensitivity

1

Press

A

in standby mode.

2

Use

AB

to select an item.

ISO

AUTO

ISO

Sets the range to be adjusted automatically.

Both the upper limit and lower limit can be changed.

Sets a fixed value from

ISO 100 to ISO

102400.

3

Use

Q

or

R

to change the value.

4

Press

E

.

The camera returns to standby mode.

--

37

Compensating the Exposure

1

Press

J

, and then turn

R

.

Recording Movies

1

Turn the main switch to

C

.

The indicator lamp lights red and the Live View image is displayed.

Sound

38 e and the compensation value are displayed on the status screen, Live View screen, and in the viewfinder during adjustment.

FF

250

5.6

Available operations

J Starts/ends adjusting the compensation value.

M Resets the adjustment value to the default setting.

Recordable Time

2

Set the mode dial to the desired capture mode.

The following settings are available depending on the capture mode.

G , J , K , L

O to Q

The camera operates in the selected exposure mode. (The aperture value can be changed only before shooting.

When set to L mode, the sensitivity can also be changed.)

The camera operates according to the saved exposure mode.

The camera operates in G mode.

Other modes

3

Focus on the subject.

In v mode, press 0 halfway.

4

Press

0

fully.

Movie recording starts.

In the upper left area of the monitor, “REC” blinks.

5

Press

0

fully again.

Movie recording stops.

6

Return the main switch to the [ON] position to exit

C

mode.

The camera returns to shooting with the viewfinder in A mode.

Focus Motor Noise during Movie Recording

When [AF Mode] of [AF with Live View] in the C 1 menu is set to y , focus motor drive noise is recorded.

Adjusting the sound level in [Recording Sound Level] of the

C 1 menu, or using an external microphone can reduce the motor noise to be recorded.

Using the Built-in Flash

1

Press

C

in standby mode.

2

Select a flash mode.

0.0

EV

±0 EV

A

Auto Flash

Discharge

B

Auto Flash +

Red-eye

C Flash On

Automatically measures the ambient light and determines whether to use the flash.

Discharges a pre-flash for red-eye reduction before an automatic flash.

Discharges a flash for each picture.

D

E

F

Flash On +

Red-eye

Slow-speed

Sync

Slow Sync +

Red-eye

Discharges a pre-flash for red-eye reduction before the main flash for each picture.

Sets to a slow shutter speed and discharges a flash for each picture.

Use this, for example, when shooting a portrait with the sunset in the background.

Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slow-speed Sync.

39

40

H

G

K

Trailing

Curtain Sync

Discharges a flash immediately before closing the shutter.

Sets to a slow shutter speed.

Captures moving objects as if they are leaving a light trail behind them.

Manual

Flash

Discharge

Sets the amount of flash discharge between FULL and 1/128 power.

Available operations

R Compensates the flash exposure.

Selects the amount of flash discharge (when

[Manual Flash Discharge] is selected).

M Resets the compensation value to the default setting.

3

Press

E

.

The camera returns to standby mode.

4

Press

1

.

The built-in flash is popped up.

t

Memo

• The flash modes that can be selected vary depending on the capture mode.

Setting the Drive Mode

1

Press

D

in standby mode.

2

Select a drive mode.

(

(

(

(

(

Single Frame Shooting

( L )

Continuous Shooting

( Z , b )

Self-timer

O , P , Y )

Normal capture mode

Continuously takes pictures while

0 is kept pressed.

Releases the shutter about 12 seconds or 2 seconds after

0 is pressed.

Remote Control

Q ,

Bracketing

T

R

,

, S

1 ,

)

U )

Mirror Lock-up

Shooting

( c , d )

Enables shooting with remote control.

Takes consecutive pictures at different exposure levels.

Takes pictures with the mirror raised.

Multi-exposure

V , z , W , X )

Interval Shooting q , U , V , w )

Creates a composite image by taking multiple pictures and merging them into a single image.

Automatically takes pictures at set intervals.

3

Press

G

to change detailed settings, and press

E

.

4

Press

E

.

The camera returns to standby mode.

u

Caution

• There are restrictions on some drive modes when used in some capture modes or in combination with some other

functions. (p.46)

t

Memo

• In C mode, you can select only [Remote Control Off] or

[Remote Control].

Setting the White Balance

1

Press

B

in standby mode.

2

Select the desired white balance setting.

For k , o , and p , turn R to select the type of white balance.

g Auto White Balance u Multi Auto White Balance h Daylight i Shade j Cloudy k q Fluorescent - Daylight Color r Fluorescent - Daylight White s Fluorescent - Cool White t Fluorescent - Warm White l Tungsten n Color Temperature Enhancement o Manual White Balance 1 to 3 p Color Temperature 1 to 3

3

Press

E

.

The camera returns to standby mode.

41

42

Reviewing Images

1

Press

3

.

The camera enters playback mode and the most recently captured image is displayed

(single image display).

2

Review the captured image.

Available operations

C / Q to the left

D / Q to the right

L

R to the right

R to the left

J

G

B

Displays the previous image.

Displays the next image.

Deletes the image.

Magnifies the image (up to

16×).

Use ABCD to change the area to display.

Press M to return the display area to the center.

Press E to return to the entire image display.

Switches to the thumbnail display.

Saves the RAW data (only when a JPEG image was taken and the data remains in the buffer).

Changes the type of information displayed

(p.10).

Displays the playback

mode palette (p.43).

Playing Back Movies

1

Display the movie to play back in single image display of the playback mode.

Available operations

A

D

Press and hold D

C

Press and hold C

B

R

J

G

Plays back/pauses a movie.

Forwards a frame (when paused).

Fast-forwards playback.

Reverses a frame (when paused).

Fast-reverses playback.

Stops playback.

Adjusts the sound volume (21 levels).

Saves the displayed frame as a

JPEG file (when paused).

Switches between [Standard

Information Display] and [No

Information Display].

Playback Mode Palette

Playback functions can be set from the playback mode palette as well as the B 1 menu.

Press B in single image display

(Standard Information Display or No

Information Display) of the playback mode to display the playback mode palette.

Rotates captured images.

Useful for image playback on

TV and other display devices

Item a Image Rotation

*1

b c

Digital Filter

*1

Color Moiré

Correction

*1 *2

Function

Changes the rotation information of images.

Processes images with digital filters.

Reduces color moiré in images.

d e

Resize

*1

Cropping

*2

*1

Changes the number of recorded pixels of the image.

Crops out only the desired area of an image.

f h i j

Protect

Slideshow

Save as Manual

WB

*1

Save Cross

Processing

Protects images from being accidentally erased.

Plays back images one after another.

Saves the white balance settings of the captured image as Manual White

Balance.

Saves the settings used for an image captured in Cross Processing mode of

Custom Image as your “Favorite” settings.

43

44 k l

Item

RAW

Development *3

Movie Edit

*4

Function

Develops RAW images into JPEG images and saves them as new files.

Divides a movie or deletes unwanted segments.

*1 Not available when a movie is displayed.

*2 Not available when a RAW image is displayed.

*3 Available only if a RAW image has been saved.

*4 Available only when a movie is displayed.

Sharing Images

Enabling the Wi-Fi Function

The Wi-Fi function is disabled when the camera is turned on.

Enable the function using one of the following methods.

Setting from the Menus

1

Select [Wi-Fi] in

D

3 menu and press

D

.

2

Set [Action Mode] to [On].

Action Mode

Communication Info

Reset Settings

D

3

3

Press

F

twice.

Using the

Y

Button

1

Press and hold

Y

in single image display of the playback mode.

Press and hold Y again to disable the Wi-Fi function.

u

Caution

• By default, you can turn the Wi-Fi function on and off by pressing and holding Y . If the Y button function is changed in [Button Customization] of the A 5 menu, you cannot turn the Wi-Fi function on and off with Y .

Operating the Camera with a

Communication Device

The following functions can be used by connecting the camera to a communication device via Wi-Fi and using the dedicated application “Image Sync”.

Remote Capture

Image View

Displays the Live View image of the camera on the communication device, and enables controlling exposure settings and shooting by operating the communication device.

Displays the images saved on the memory card inserted in the camera on the communication device and imports the images to the communication device.

Image Sync supports iOS and Android, and can be downloaded from the App Store or Google Play. For supported OS and other details, refer to the download site.

45

46

Restrictions on Each Capture Mode

Capture Mode

R

Function

Sensitivity

Flash

Continuous

Shooting

Self-timer

Remote Control

Bracketing

Multi-exposure

Interval Shooting

Interval

Composite

Interval Movie

Record

Star Stream

AF with Viewfinder

z *2

#: Restricted

×

: Not available b cd im q eo f

S gh js tv k l p u

Z

*2

×

×

×

×

×

Z

*2

×

×

×

×

×

×

×

×

×

×

×

×

×

×

×

× ×

× ×

× × × x

*2 x *2 y *2 x *2

x

*2 x *2 y *2

y

*2 y *2

M

*1

×

×

×

×

×

×

C

×

×

×

Q

*3

×

×

×

×

×

×

Capture Mode

Function

File Format

RAW/RAW+

White Balance

Custom Image

Clarity/Skin Tone

Digital Filter

HDR Capture

Pixel Shift Resolution

AA Filter Simulator

R g

*2

×

*4

b

g *2

×

*4

cd im q g

*2

×

*4

eo

g *2

×

*4

Shake Reduction

Save RAW Data

*1 [ISO AUTO] is not available.

*2 Fixed to; the setting cannot be changed.

*3 Limited to; available settings are limited.

*4 Fixed to; specific settings to the selected mode are used.

*5 Fixed to [HDR AUTO].

*6 [Bracketing] is not available.

×

×

×

#

*6

f

S gh js tv g

*2

×

*4 g *2

×

*4

k l g

*2

×

*4

×

×

×

*5

×

×

On

*2 g *2

×

*4

p

×

×

#

*6

u g

*2

×

*4 g *2

×

*4

×

M

×

×

#

*6

×

C

×

×

×

×

×

47

48

Restrictions on the Combinations of Special Functions

Clarity/

Skin Tone/

Digital Filter

HDR

Capture

Flash

Continuous

Shooting

Bracketing

Mirror Lock-up

Shooting

Multi-exposure

Interval Shooting

×

#

*1

×

×

×

×

×

#

*1

Interval Composite × ×

Interval Movie

Record

#

*1

#

*1

Star Stream

HDR Capture

×

×

×

×

Pixel Shift Resolution

AA Filter Simulator

×

×

*1 There is a restriction on the minimum value for [Interval].

*2 [Bracketing] is not available.

*3 Only the final frame can be saved.

Pixel Shift

Resolution

ASTRO-

TRACER

×

×

×

×

×

×

×

×

×

×

×

×

×

×

×

×

# *2

×

×

×

AA Filter

Simulator

#: Restricted

×

: Not available

Distortion

Correction/

Diffraction

Correction

Save RAW

Data

# *2

×

×

#

*2

# *2

#

*2

# *2

# *2

# *2

#

*2

×

×

×

×

#

*3

#

*3

×

×

Functions Available with Various

Lenses

All capture modes are available when a DA, DA L, D FA, FA J, or FA lens is used, or when a lens with an 9 position is used with the aperture ring set to the 9 position.

Depending on the lens to use, the following restrictions apply.

x : Available #: Restricted

×

: Not available

Lens

[Mount type]

DA

DA L

D FA

FA J

FA

*6

F *6

A

M

P

Function

[KAF]

[KAF2]

[KAF3]

[KAF4]

[KAF]

[KAF2]

[KAF] [KA] [K]

Autofocus

(Lens only)

(With AF adapter 1.7×)

*1

Manual focus

(With focus indicator)

*2

(With matte field) x

– x x

– x x

– x

–

# x

–

# x

Quick-shift focus

AF Active Area [Auto]

AE Metering [Multi-segment] x

G / H / I / J / K mode

#

*4

x x

× × × × x x #

*8

× x x x x x x

×

#

*9

L mode

P-TTL auto flash

*3

Automatic obtaining of the lens focal length information

Lens Correction x x x

x

*5

x x x

#

*7

x x # x x

× x

× ×

× × ×

*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the 9 position.

*2 Lenses with a maximum aperture of F5.6 or faster.

*3 Available when using the built-in flash, AF540FGZ, AF540FGZ II,

AF360FGZ, AF360FGZ II, AF201FG, AF200FG, or AF160FC.

*4 Only available with compatible lenses.

*5 Distortion Correction and Peripheral Illumination Correction are disabled when a DA FISH-EYE 10-17mm lens is used.

*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or

F SOFT 85mm F2.8 lens, set [24 Using Aperture Ring] to [Enable] in the E 4 menu. Pictures can be taken with the aperture you set, but only within a manually adjustable aperture range.

*7 The Lens Correction features are available with the following FA lenses (Only Distortion Correction and Lateral Chromatic Aberration

Adjustment can be used when the aperture ring is set to a position other than 9 .): FA k

24mm F2 AL [IF], FA 28mm F2.8 AL, FA 31mm

F1.8 Limited, FA 35mm F2 AL, FA 43mm F1.9 Limited, FA 50mm

F1.4, FA 77mm F1.8 Limited, FA

ED [IF], FA

FA k

300mm F4.5 ED [IF], FA

ED [IF], FA k k k k

28-70mm F2.8 ED [IF], FA and FA k

250-600mm F5.6 ED [IF].

85mm F1.4 [IF], FA k

MACRO 200mm F4 ED, FA k

200mm F2.8

300mm F2.8 ED [IF],

400mm F5.6 ED [IF], FA k

600mm F4 k

80-200mm F2.8 ED [IF],

*8 Fixed to [Spot].

*9 J with the aperture set to wide open. (The aperture ring has no effect on the actual aperture value.)

49

50

Main Specifications

Model Description

Type

Lens Mount

Usable Lenses

TTL autofocus, auto-exposure SLR digital camera with a built-in retractable P-TTL flash

PENTAX KAF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)

KAF4, KAF3, KAF2 (power zoom not compatible),

KAF, KA mount lenses

Image Capture Unit

Image Sensor

Effective Pixels

Total Pixels

Dust Removal

CMOS with a primary color filter, Size: 23.5 × 15.6 (mm)

Approx. 24.24 megapixels

Approx. 24.78 megapixels

Image sensor movement combined with SP coating

Sensitivity

(Standard Output)

ISO AUTO, Manual ISO range: 100 to 102400

• EV steps can be set to 1 EV, 1/2 EV, or 1/3 EV

Image Stabilizer Sensor-shift Shake Reduction (SR)

AA Filter

Simulator

Moiré reduction using SR unit: Off, Type1, Type2,

Bracketing (3 images)

File Formats

Recording

Formats

Recorded Pixels

Quality Level

Color Space

Storage Media

RAW (PEF/DNG), JPEG (Exif 2.3 compliant), DCF

2.0 compliant

JPEG: q (24M: 6000×4000), p (14M:

4608×3072), o (6M: 3072×2048), r (2M:

1920×1280)

RAW: 24M, 6000×4000

RAW (14bit): PEF, DNG

JPEG: m (Best), l (Better), k (Good)

• RAW + JPEG simultaneously recordable sRGB, AdobeRGB

SD/SDHC*/SDXC* memory card

* UHSI compatible

Storage Folder

Storage File

Folder Name: Date (100_1018, 101_1019...) or user-assigned name (default: PENTX)

File Name: user-assigned name (default:

IMGP  )

File No.: Sequential Numbering, Reset

Viewfinder

Type Pentaprism Finder

Coverage (FOV) Approx. 100%

Magnification

Eye-Relief Length

Approx. 0.95× (50mm F1.4 at infinity)

Approx. 20.5 mm (from the view window)

Approx. 22.3 mm (from the center of lens)

Diopter

Adjustment

Approx. -2.5 to +1.5 m

-1

Focusing Screen

Interchangeable Natural-Bright-Matte III focusing screen

Live View

Type

Autofocusing

System

Display

TTL method using the CMOS image sensor

Hybrid AF of image plane phase-matching and contrast detection

AF Active Area: Face Detection, Tracking, Multiple

AF Points, Select, Spot

Focus Peaking: On, Off

Field of view: approx. 100%, Magnified view (up to

16×), Grid Display (4×4 Grid, Golden Section, Scale,

Square 1, Square 2, Grid Color: Black, White),

Histogram, Highlight Alert

LCD Monitor

Type

Size

Dots

Adjustment

Vari-angle TFT color LCD monitor featuring an airgapless structure with a tempered-glass front panel

3.0 inches (aspect ratio 3:2)

Approx. 1037K dots

Brightness, saturation and colors adjustable

Outdoor View

Setting

Night Vision LCD

Display

±2 steps

On, Off

White Balance

Type

Preset Modes

TTL method using the CMOS image sensor

Auto White Balance, Multi Auto White Balance,

Daylight, Shade, Cloudy, Fluorescent Light

( D : Daylight Color, N : Daylight White, W : Cool

White, L : Warm White), Tungsten Light, n ,

Manual White Balance (up to 3 settings), Color

Temperature (up to 3 settings), Copying the white balance settings of a captured image

Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis

Focus System

Type

Focus Sensor

TTL phase-matching autofocus system

SAFOX X, 11 points (9 cross type focus points in the center)

Brightness Range EV -3 to 18 (ISO100, at normal temperature)

AF Modes

Single AF ( x ), Continuous AF ( y ), Auto select AF ( z )

Focusing Area

Selection Modes

AF Assist Light

Auto (11 AF Points), Auto (5 AF Points), Select,

Expanded Area AF, Spot

Dedicated LED AF assist light

Exposure Control

Type

TTL open-aperture 77 segment metering

Metering modes: Multi-segment, Center-weighted,

Spot

Metering Range EV 0 to 22 (ISO100 at 50mm F1.4)

Capture Modes

Auto Picture ( R ) modes: Standard, Portrait,

Landscape, Macro, Moving Object, Night Scene

Portrait, Sunset, Blue Sky, Forest

Scene ( S ) modes: Portrait, Landscape, Macro,

Moving Object, Night Scene Portrait, Sunset, Blue

Sky, Forest, Night Scene, Night Scene HDR, Night

Snap, Food, Pet, Kids, Surf & Snow, Backlight

Silhouette, Candlelight, Stage Lighting, Museum

Exposure modes: Program, Sensitivity Priority,

Shutter Priority, Aperture Priority, Shutter & Aperture

Priority, Manual, Bulb

EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected)

AE Lock Can be assigned to f in [Button Customization].

Shutter

Type

Shutter Speed

Electronically controlled vertical-run focal plane shutter

• Electronic shutter is used for Pixel Shift Resolution

Auto: 1/6000 to 30 seconds, Manual: 1/6000 to 30 seconds (1/3 EV steps or 1/2 EV steps), Bulb (timed exposure setting possible from 10 seconds to 20 minutes)

Drive Modes

Mode Selection

[Still picture]

Single frame, Continuous (H, L), Self-timer (12 sec.,

2 sec., continuous), Remote Control (immediately,

3 sec., continuous), Bracketing *1 (2, 3, or 5 frames),

Mirror Lock-up Shooting

Shooting

Record

[Movie]

*1

*1 , Interval Composite

, Star Stream *1

*2

, Multi-exposure

*1

*3

, Interval

, Interval Movie

Remote Control

*1 Available with Self-timer or Remote Control

*2 Available with Remote Control

*3 Available with Continuous Shooting, Self-timer, or Remote Control

51

52

Continuous

Shooting

Multi-exposure

Interval Shooting

Max. approx. 6.0 fps, JPEG ( q : m at

Continuous H): up to approx. 40 frames, RAW: up to approx. 10 frames, RAW+: up to approx. 8 frames

Max. approx. 3.0 fps, JPEG ( q : m at

Continuous L): up to approx. 100 frames, RAW: up to approx. 16 frames, RAW+: up to approx. 11 frames

• When the sensitivity is set to ISO100

Composite Mode: Additive, Average, Bright

Number of Shots: 2 to 2000 times

[Interval Shooting]

Interval: 2 sec. to 24 hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Self-timer, Remote

Control, Set Time

[Interval Composite]

Interval: 2 sec. to 24 hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Self-timer, Remote Control,

Set Time, Composite Mode: Additive, Average, Bright,

Save Process: On, Off

[Interval Movie Record]

Recorded Pixels: z , u , t , Recording Format:

Motion JPEG (AVI), Interval: 2 sec. to 24 hr.,

Standby Interval: minimum time or 1 sec. to 24 hr.,

Number of Shots: 8 to 2000 times (When z is selected: 8 to 500 times), Start Interval: Now, Selftimer, Remote Control, Set Time

[Star Stream]

Recorded Pixels: z , u , t , Recording Format:

Motion JPEG (AVI), Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 8 to 2000 times

(When z is selected: 8 to 500 times), Start Interval:

Now, Self-timer, Remote Control, Set Time, Fadeout: Off, Low, Medium, High

Flash

Built-in Flash

Built-in retractable P-TTL pop-up flash

Guide number: approx. 12 (ISO100/m)

Angle of view coverage: equivalent to 28mm lens in

35 mm format

Flash Modes

Sync Speed

Flash Exposure

Compensation

Auto Flash Discharge (Auto Picture, Scene Mode),

Auto Flash + Red-eye Reduction (Auto Picture,

Scene Mode), Flash On, Flash On + Red-eye

Reduction, Slow-speed Sync, Slow-speed Sync +

Red-eye Reduction, Trailing Curtain Sync, Manual

Flash Discharge (FULL to 1/128 power)

1/180 seconds

-2.0 to +1.0 EV

External Flash

P-TTL, Leading Curtain Sync, Trailing Curtain Sync,

Contrast Control Sync*, High-speed Sync, Wireless Sync*

* Available with two or more dedicated external flash units

Capture Functions

Custom Image

Auto Select, Bright, Natural, Portrait, Landscape,

Vibrant, SATOBI, Radiant, Muted, Flat, Bleach

Bypass, Reversal Film, Monochrome, Cross

Processing, KATEN, KYUSHU

Cross Processing Random, Preset 1-3, Favorite 1-3

Digital Filter

Clarity

Skin Tone

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

-4.0 to +4.0

Type1, Type2, Off

HDR Capture

Auto, Type1, Type2, Type3, Advanced HDR, Off

Bracket Value: adjustable

Auto Align (automatic composition correction function): available

Pixel Shift Resolution Motion Correction On, Motion Correction Off, Off

Lens Correction

Distortion Correction, Peripheral Illumination

Correction, Lateral Chromatic Aberration

Adjustment, Diffraction Correction

D-Range Settings Highlight Correction, Shadow Correction

Noise Reduction Slow Shutter Speed NR, High-ISO NR

Horizon

Correction

SR On: corrects up to 1 degree

SR Off: corrects up to 1.5 degrees

Electronic Level

Displayed in viewfinder (horizontal direction only); displayed on monitor (horizontal direction and vertical direction)

Movie

Recording Format MPEG-4 AVC/H.264 (MOV)

Recorded Pixels u (1920×1080, 60i/50i/30p/25p/24p) t (1280×720, 60p/50p)

Autofocusing

System

Hybrid AF of image plane phase-matching and contrast detection

AF Mode: Single AF ( x ), Continuous AF ( y )*

* Continuous AF ( y ) is available only when a compatible lens is attached to the camera.

AF Active Area: Multiple AF Points, Select, Spot

Focus Peaking: On, Off

Sound

Recording Time

Digital Filter

Built-in stereo microphone, external microphone

(stereo recording compatible)

Recording Sound Level: adjustable

Up to 4 GB or 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.

Custom Image

Auto Select, Bright, Natural, Portrait, Landscape,

Vibrant, SATOBI, Radiant, Muted, Flat, Bleach

Bypass, Reversal Film, Monochrome, Cross

Processing, KATEN, KYUSHU

Cross Processing Random, Preset 1-3, Favorite 1-3

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

Playback Functions

Playback View

Delete

Digital Filter

RAW

Development

Editing Features

Single image, Multi-image display (6, 12, 20, 35, and

80 thumbnails), Image magnification (Up to 16× and quick zoom), Grid Display (4×4 Grid, Golden Section,

Scale, Square 1, Square 2, Grid Color: Black, White),

Rotated image display, Histogram (Y histogram, RGB histogram), Highlight Alert, Auto Image Rotation,

Detailed Information Display, Copyright Information

(Photographer, Copyright Holder), GPS information

(Latitude, Longitude, Altitude, Coordinated Universal

Time (UTC)), Direction, Folder Display, Calendar

Filmstrip Display, Slideshow

Single image, all images, select & delete, folder,

Instant Review image

Base Parameter Adj, Extract Color, Replace Color,

Toy Camera, Retro, High Contrast, Shading, Invert

Color, Unicolor Bold, Bold Monochrome, Tone

Expansion, Sketch, Water Color, Pastel,

Posterization, Miniature, Soft, Starburst, Fish-eye,

Slim, Monochrome

Development options: Select single image, Select multiple images, Select a folder

Development parameters: White Balance, Custom

Image, Sensitivity, Clarity, Skin Tone, Digital Filter,

HDR Capture, Pixel Shift Resolution, Shadow

Correction, High-ISO NR, Distortion Correction,

Peripheral Illumination Correction, Lateral Chromatic

Aberration Adjustment, Diffraction Correction, Color

Fringe Correction, Aspect Ratio, JPEG Recorded

Pixels, JPEG Quality, Color Space

Image Rotation, Color Moiré Correction, Resize,

Cropping (aspect ratio can be changed and tilt correction is available), Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a

JPEG still picture from a movie, Save RAW Data

Customization

USER Modes Up to 3 settings can be saved.

Custom Functions 24 items

Mode Memory 16 items

53

54

Button

Customization

AF Customization

Text Size

World Time

AF Fine

Adjustment

Indicator Lamps

Copyright

Information

X / Y button: One Push File Format, Wi-Fi,

Outdoor View Setting, Night Vision LCD Display,

Preview, Electronic Level, Change AF Area f button: Enable AF1, Enable AF2, Cancel AF,

AE Lock

E-dials (front/rear): customizable to each exposure mode

AF.S: Focus-priority, Release-priority

1st Frame Action in AF.C: Auto, Focus-priority,

Release-priority

Action in AF.C Continuous: Auto, Focus-priority,

FPS-priority

Hold AF Status: Off, Low, Medium, High

AF in Interval Shooting: Locks focus at 1st exposure,

Adjusts focus for each shot

AF with Remote Control: Off, On

Standard, Large

World Time settings for 75 cities (28 time zones)

±10 steps, adjustment for all lenses or individual lenses (up to 20 values can be saved)

Other Indicator Lamps: High, Low, Off

Self-timer: On, Off

Remote Control: On, Off

GPS LED Indicators: On, Off

Names of “Photographer” and “Copyright Holder” are embedded to the image file. A revision history can be checked using the provided software.

Power Supply

Battery Type

AC Adapter

Battery Life

Rechargeable Lithium-ion Battery D-LI109

AC Adapter Kit K-AC168 (optional)

Number of recordable images: (with 100% flash usage): approx. 350 images

(with 50% flash usage): approx. 400 images

(without flash usage): approx. 460 images

Playback time: approx. 250 minutes

• Tested in compliance with CIPA standard using a fully charged lithium-ion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances.

Interfaces

Connection Port

USB 2.0 (micro B), HDMI output terminal (Type D), stereo microphone/cable release input terminal

(ø3.5 mm connector)

USB Connection MSC/PTP

Wireless LAN

Standards

Frequency

(Center

Frequency)

Security

IEEE 802.11b/g/n (standard wireless LAN protocol)

2412 to 2462 MHz (channels: Ch 1 to Ch 11)

Authentication: WPA2

Encryption: AES

Dimensions and Weight

Dimensions

Weight

Approx. 125.5 mm (W) × 93.0 mm (H) × 74.0 mm (D)

(excluding protrusions)

Approx. 684 g (including dedicated battery and an

SD Memory Card)

Approx. 625 g (body only)

Operating Environment

Temperature

Humidity

-10 to 40°C (14 to 104°F)

85% or less (no condensation)

Included Accessories

Package

Contents

Software

Strap O-ST132, Rechargeable Lithium-ion Battery

D-LI109, Battery Charger D-BC186, USB power adapter, Power plug, USB cable I-USB166, Software

(CD-ROM) S-SW186, Start Guide

<Mounted to the camera> Eyecup F

R

, Hot shoe cover

F

K

, Body mount cover

Digital Camera Utility 5

USB Power Adapter AC-U2

Power Supply

Output

Average Active

Efficiency

No-Load Power

Consumption

Storage

Temperature

100 to 240 VAC (50/60 Hz), 0.2 A

5.0 VDC, 1000 mA, 5.0 W

76%

70 mW

-20 to 60°C (-4 to 140°F)

Dimensions

Weight

42.5 mm (W) × 22 mm (H) × 66.5 mm (D) (1.7 in. (W)

× 0.9 in. (H) × 2.6 in. (D)) (excluding the power plug)

Approx. 40 g (1.4 oz) (excluding the power plug)

Rechargeable Lithium-ion Battery D-LI109

Nominnal Voltage 7.4 V

Rated Capacity 1050 mAh, 7.8 Wh

Operating

Temperature

Storage

Temperature

-10 to 60°C (14 to 140°F)

-20 to 50°C (-4 to 122°F)

Dimensions

Weight

Approx. 36.1 mm (W) × 56.6 mm (H) × 14.4 mm (D)

(1.4 in. (W) × 2.2 in. (H) × 0.6 in. (D))

Approx. 57 g (2 oz.)

Optional Accessories

GPS Unit

Cable Release

O-GPS1/O-GPS2: GPS information (Latitude,

Longitude, Altitude, Coordinated Universal Time

(UTC)), Direction, Electronic Compass,

ASTROTRACER

Cable Switch CS-310

Approximate Image Storage Capacity and

Playback Time

(When using the fully charged battery)

Battery

Temperature

Normal

Shooting

Flash Photography

50%

Use

100%

Use

Playback

Time

D-LI109 23°C 460 400 350

250 minutes

• Tested in compliance with CIPA standard using a fully charged lithiumion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances.

Approximate Image Storage Capacity by Size

(When using an 8 GB memory card)

Recorded

Pixels q 24M p 14M o 6M r 2M m

528

889

1964

4723

JPEG Quality l

1192

1996

4309

9824 k

2339

3837

7923

16374

PEF

151

–

–

–

• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode, and memory card, etc.

55

56

Operating Environment for USB Connection and Provided Software

With the provided software “Digital Camera Utility 5”, you can develop RAW images, make color adjustments, or check shooting information on a computer. Install the software from the provided CD-ROM (S-SW186).

We recommend the following system requirements to connect the camera to a computer with a commercially available USB cable and to use the software.

Windows

®

OS

CPU

RAM

Windows ®

64-bit)

11 or Windows ® 10 (FCU, CU) (32-bit,

Intel ® Core™ i5 or higher

8 GB or more

HDD

For installing and starting up the program:

Approx.100 MB or more of available space

For saving image files: Approx. 10 MB/file (JPEG),

Approx. 30 MB/file (RAW)

Monitor 1280×1024 dots, 24-bit full color or higher

Mac

OS

CPU

RAM macOS 12 Monterey, macOS 11 Big Sur, macOS

10.15 Catalina

Intel ® Core™ i5 or higher

8 GB or more

HDD

For installing and starting up the program:

Approx.100 MB or more of available space

For saving image files: Approx. 10 MB/file (JPEG),

Approx. 30 MB/file (RAW)

Monitor 1280×1024 dots, 24-bit full color or higher t

Memo

• Application software that supports both MOV (MPEG-4AVC/

H.264) and AVI (Motion JPEG) formats is required to play back movie files transferred to a computer.

Index

Symbols

A menus........................ 15

C menus........................ 20

B menu.......................... 21

D menus......................... 22

E menus ......................... 25

C mode.......................... 38

b Portrait....................... 35 c Landscape................. 35 d Macro ........................ 35 e Moving Object ........... 35 f Night Scene Portrait .. 35 g Sunset ....................... 35 h Blue Sky .................... 35 i Forest ........................ 35 j Night Scene............... 35 k Night Scene HDR ...... 35 l Night Snap................. 35 m Food .......................... 35 o Pet ............................. 35 p Kids ........................... 35 q Surf & Snow .............. 35 s Backlight Silhouette... 35 t Candlelight ................ 35 u Stage Lighting ........... 35 v Museum..................... 35

A

AE-L with AF Locked ....... 25

AF Assist Light .................. 5

AF coupler ......................... 5

AF frame.................... 33, 34

Aperture Priority Automatic

Exposure ......................... 36

Aperture value ................. 36

ASTROPHOTO ............... 34

Auto EV Compensation ... 25

Auto Flash + Red-eye...... 39

Auto Flash Discharge ...... 39

Auto White Balance (White

Balance) .......................... 41

J mode ........................ 36

B

M mode ........................... 36

Backlight Silhouette ( S )

........................................ 35

Blue Sky ( S )............... 35

Built-in flash ..................... 39

Bulb Exposure ........... 36, 37

Button ................................ 6

C

Candlelight ( S )........... 35

Capture mode.................. 34

Card................................. 29

Card access lamp.............. 5

Certification Marks........... 61

Charging the battery ........ 28

City names ...................... 30

CLEAR TONE ................. 34

Cloudy (White Balance)... 41

Communication device .... 45

Control panel ............. 10, 12

n ................................ 41

Custom Setting menus .... 25

Customization.................. 13

D

Date Format .................... 31

Daylight (White Balance)

........................................ 41

Delete .............................. 42

Delete All Images ............ 21

Dial .................................... 6

Dial indicator.................... 33

Digital Camera Utility 5

........................................ 56

Diopter adjustment lever

........................................ 11

Direct keys....................... 12

Display Color ................... 31

Drive Mode ...................... 40

DST (daylight saving time)

........................................ 30

E

Electronic Level ............... 11

EV Compensation ........... 38

Exposure modes ............. 36

F

Firmware Info/Options ..... 24

Flash................................ 39

Flash compensation ........ 40

Flash On .......................... 39

Flash On + Red-eye ........ 39

Flicker Reduction....... 17, 20

Fluorescent - Cool White

(White Balance) ............... 41

Fluorescent - Daylight Color

(White Balance) ............... 41

Fluorescent - Daylight White

(White Balance) ............... 41

Fluorescent - Warm White

(White Balance) ............... 41

Focus indicator ................ 33

Focus mode switch.......... 32

Food ( S )..................... 35

Forest ( S )................... 35

Format ............................. 32

Four-way controller...... 7, 12

Function restrictions ........ 46

G

Grid Display ..................... 17

Guide Display .................. 33

H

HDR LANDSCAPE .......... 34

Hometown ....................... 30

Horizon Correction........... 17

Hot shoe ............................ 5

57

58

I

Image plane indicator ........ 5

Image storage capacity

........................................ 55

Image Sync ..................... 45

Image View (Image Sync)

........................................ 45

Initial settings................... 30

Initializing a memory card

........................................ 32

Instant Review ........... 18, 33

ISO sensitivity.................. 37

K

Kids ( S )...................... 35

L

Landscape ( S ) ........... 35

Language/ W ................ 30

LCD Display Settings ...... 23

Lens........................... 27, 49

Lens information contacts

.......................................... 5

Lens mount index ............ 27

Lens unlock button .......... 27

Lever ................................. 6

Live View ........................... 9

M

L mode .......................... 36

Mac.................................. 56

Macro ( S )................... 35

Manual Exposure ............ 36

Manual Flash Discharge.. 40

Memory card ................... 29

Menu ............................... 14

Meter Operating Time ..... 25

Microphone........................ 5

Microphone/cable release terminal.............................. 5

Mirror ................................. 5

Mode dial ......................... 33

Monitor ........................ 8, 30

Mount type....................... 49

Movie menus ................... 20

Movie mode ..................... 38

Movie SR ......................... 20

Moving Object ( S )...... 35

Multi Auto White Balance

(White Balance)............... 41

Museum ( S ) ............... 35

N

Night Scene ( S ) ......... 35

Night Scene HDR ( S )

........................................ 35

Night Scene Portrait ( S )

........................................ 35

Night Snap ( S ) ........... 35

O

Operating environment .... 56

Operating Manual............ 70

Other Display Settings..... 18

P

G mode .......................... 36

Pet ( S ) ....................... 35

Playback Info Display selection screen .............. 10

Playback menu ................ 21

Playback mode ................ 42

Playback mode palette .... 43

Portrait ( S ) ................. 35

Program Automatic Exposure

......................................... 36

Provided software............ 56

R

Rec. Mode menus ........... 15

Recordable time .............. 38

Remote Capture (Image

Sync) ............................... 45

Remote control receiver .... 5

Reset ......................... 24, 26

Retractable lens .............. 32

S

Save RAW Data .............. 33

Scene modes .................. 35

S mode ...................... 35

Sensitivity ........................ 37

Sensitivity Priority Automatic

Exposure ......................... 36

Set-up menus .................. 22

Shade (White Balance) ... 41

Shake Reduction ............. 17

Shooting .......................... 32

Shooting with Live View .. 34

Shooting with viewfinder.. 32

Shutter & Aperture Priority

Automatic Exposure ........ 36

Shutter Priority Automatic

Exposure ......................... 36

Shutter speed .................. 36

Single Frame Shooting .... 40

Single image display

.................................. 10, 42

Slow Sync + Red-eye ...... 39

Slow-speed Sync............. 39

Sound .............................. 38

Sound Effects .................. 22

Speaker ............................. 5

Specifications .................. 50

Stage Lighting ( S )...... 35

Standby mode ................... 8

Status Screen .................... 9

Strap ................................ 27

Strap lug .......................... 27

Sunset ( S ).................. 35

Surf & Snow ( S )......... 35

H mode ........................ 36

Switch ................................ 6

T

K mode ........................ 36

Text Size.......................... 31

Thumbnail display............ 42

Timed exposure............... 37

Trailing Curtain Sync ....... 40

Tungsten (White Balance)

........................................ 41

I mode......................... 36

U

USB Connection .............. 56

User registration ................ 4

V

Viewfinder........................ 11

Viewfinder Overlay .......... 17

Volume ............................ 22

W

WARRANTY POLICY...... 65

White Balance ................. 41

Wi-Fi ................................ 44

Windows ® ........................ 56

Z

Zoom Review .................. 42

59

60

Care to be Taken During Handling

Before Using Your Camera

• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.

About the Battery and Charger

• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.

• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.

• Charging the battery a day before use or on the day of use is recommended.

Precautions on Carrying and Using Your Camera

• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).

• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.

• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.

• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.

These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops immediately.

• Do not attach or remove a lens when there are any rain or water drops on the camera. If water enters the camera or the lens, a malfunction may occur.

• Do not press on the monitor with excessive force. This could cause it to break or malfunction.

• Be careful not to overtighten the screw in the tripod socket when using a tripod.

Cleaning Your Camera

• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.

• Use a lens brush to remove dust accumulated on a lens. Never use a spray blower for cleaning as it may damage the lens.

• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to maintain high performance.

Storing Your Camera

• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.

Remove the camera from its case and store it in a dry and well-ventilated place.

• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.

About SD Memory Cards

• The SD Memory Card is equipped with a write-protect switch. Setting the switch to

LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.

Write-protect switch

• The SD Memory Card may be hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.

• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if

1. the SD Memory Card is mishandled by the user.

2. the SD Memory Card is exposed to static electricity or electrical interference.

3. the SD Memory Card has not been used for a long time.

4. the SD Memory Card or the battery is removed while the card is being accessed.

• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.

• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.

• The data on your SD Memory Card should be managed at your own risk.

About the Wireless LAN Function

• Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields and electromagnetic waves.

• If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate.

• If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur.

• If there are multiple wireless LAN access points near the camera and the same channel is used, search operation may not be executed correctly.

• The security of your data stored, sent or received is your own responsibility.

In the frequency band used by the camera, along with industrial, scientific, and medical devices such as microwave ovens, premises radio stations (wireless stations requiring license) and specified low power radio stations (wireless stations not requiring license) for mobile object identification used in factory production lines, etc., and amateur radio stations (wireless stations requiring license) are operated.

1. Before using the camera, confirm that premises radio stations and specified low power radio stations for mobile object identification and amateur radio stations are not operated in the vicinity.

2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile object identification, immediately change the frequency being used to avoid interference.

3. If you have other troubles such that the camera causes harmful radio wave interference to specified low power radio stations for mobile object identification or to amateur radio stations, contact your nearest service center.

This camera conforms to the technical standards under the Radio Law and

Telecommunications Business Law and the certification of conformance to technical standards can be displayed on the monitor.

Display the Certification Marks

1

Press F to display the menu screen.

2

Use ABCD to display the D 5 menu.

3

Use ABCD to select [Certification Marks], and press E .

61

62

À propos de la fonction de réseau local sans fil

• N'utilisez pas l'appareil photo dans un endroit où des produits

électriques, des dispositifs AV/OA, etc. génèrent des champs magnétiques et des ondes électromagnétiques.

• Si l'appareil photo est affecté par des champs magnétiques et des ondes électromagnétiques, il se peut qu'il ne puisse pas communiquer.

• Si l'appareil photo est utilisé à proximité d'un téléviseur ou d'une radio, une mauvaise réception ou un scintillement de l'écran du téléviseur peut se produire.

• S'il y a plusieurs point d'accès au réseau local sans fil à proximité de l'appareil photo et que le même canal est utilisé, l'opération de recherche peut ne pas être exécutée correctement.

• La sécurité des données stockées, envoyées ou reçues relève de votre propre responsabilité.

Dans la bande de fréquences utilisée par l'appareil photo, ainsi que les dispositifs industriels, scientifiques et médicaux tels que les fours

à micro-ondes, les stations de radio locales (stations sans fil nécessitant une licence) et les stations de radio de faible puissance spécifiées (stations sans fil ne nécessitant pas de licence) pour l'identification d'objets mobiles utilisés dans les chaînes de production d'usine, etc., et les stations de radioamateur (stations sans fil nécessitant une licence) sont exploitées.

1. Avant d'utiliser l'appareil photo, vérifiez que les stations de radio locales et les stations de radio de faible puissance spécifiées pour l'identification d'objets mobiles et les stations de radioamateur ne sont pas exploitées à proximité.

2. Dans le cas où l'appareil photo provoque des interférences d'ondes radio nuisibles aux stations radio locales pour l'identification d'objets mobiles, changez immédiatement la fréquence utilisée pour éviter les interférences.

3. Si vous rencontrez d'autres problèmes tels que des interférences d'ondes radio provoquées par l'appareil photo, nuisibles aux stations radio de faible puissance spécifiées pour l'identification d'objets mobiles ou aux stations de radioamateur, contactez votre centre de service le plus proche.

Cet appareil photo est conforme aux normes techniques en vertu de la loi sur la radio et de la loi sur les télécommunications et la certification de conformité aux normes techniques peut être affichée sur l'écran.

Afficher les marques de certification

1

Appuyez sur F pour afficher l'écran du menu.

2

Utilisez ABCD pour afficher le menu D 5.

3

Utilisez ABCD pour sélectionner [Marques de certification], puis appuyez sur E .

Trademarks

• Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States of America and other countries.

• Mac, macOS, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/ or other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• Google, Google Play, and Android are trademarks or registered trademarks of Google Inc.

• Wi-Fi is a registered trademark of Wi-Fi Alliance.

• This product includes DNG technology under license by Adobe Systems

Incorporated.

• The DNG logo is either a registered trademark or trademark of Adobe

Systems Incorporated in the United States and/or other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the

United States and/or other countries.

All other trademarks are the property of their respective owners.

• This product uses the RICOH RT font designed by Ricoh Company Ltd.

• This product supports PRINT Image Matching III. PRINT Image

Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image

Matching III compliant.

Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT

Image Matching is a trademark of Seiko Epson Corporation. The PRINT

Image Matching logo is a trademark of Seiko Epson Corporation.

AVC Patent Portfolio License

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard

(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com.

63

64

Announcement on the Use of BSD-Licensed Software

This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc.

Tera Term

Copyright (C) 1994-1998 T. Teranishi

(C) 2004-2016 TeraTerm Project

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

WARRANTY POLICY

All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.

Procedure During 12-month Warranty Period

Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

• This warranty policy does not affect the customer’s statutory rights.

• The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.

65

66

For Customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We:

Located at:

RICOH IMAGING AMERICAS

CORPORATION

2 Gatehall Drive Suite 204, Parsippany,

New Jersey 07054, U.S.A.

Phone: 800-877-0155

Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name:

Model Number:

Digital Camera

R06010

Contact Person: Customer Service Manager

Date and Place: October, 2022 Parsippany

For Customers in USA and Canada

Lithium-ion batteries are recyclable.

You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org/.

For Customers in Canada

Innovation, Science and Economic Development Canada

(ISED) Regulatory Compliance Notice

This Class B digital apparatus complies with Canadian ICES-

003 (B).

This device complies with Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The R06010 has been tested and found to comply with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

Pour les clients aux États-Unis et au Canada

Les batteries au lithium-ion sont recyclables.

Vous pouvez contribuer à préserver notre environnement en ramenant les batteries rechargeables usagées dans le centre de collecte et de recyclage le plus proche de chez vous.

Pour plus d'informations sur le recyclage des batteries rechargeables, appelez le numéro gratuit 1-800-822-8837 ou rendez-vous sur le site http://www.call2recycle.org/.

Pour les utilisateurs au Canada

Avis de conformité à la réglementation d’Innovation,

Sciences et Développement économique Canada (ISDE)

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 (B) du Canada.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun problème de santé associé à l’usage des appareils sans fil à faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil

à faible puissance sont entièrement sans danger. Les appareils sans fil à faible puissance émettent une énergie fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut

67

68 avoir des effets sur la santé (en chauffant les tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur n’a pas de mauvais effets connus sur la santé. De nombreuses

études ont été menées sur les expositions aux RF faibles et n’ont découvert aucun effet biologique. Certaines études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés par des recherches supplémentaires. Le R06010 a été testé et jugé conforme aux limites d’exposition aux rayonnements ISDE énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE.

For Customers in Europe

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.

Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.

By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.

For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.

For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.

Notice to Users in CE Marking

This product complies with the essential requirements and provisions of RE Directive 2014/53/EU.

The EU Declaration of Conformity is available by accessing the

URL: https://www.ricoh-imaging.co.jp/english/support/ declaration_of_conformity.html

and selecting the product applicable.

Operating frequency band: 2400 MHz - 2483.5 MHz

Maximum radio-frequency power: 8.16 dBm EIRP

Importer (CE marking): RICOH IMAGING EUROPE S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

Manufacturer: RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

Notice to Users in UKCA Marking

This product complies with the essential requirements and provisions of Radio Equipment Regulations 2017.

The UK Declaration of Conformity is available by accessing the

URL: https://www.ricoh-imaging.co.jp/english/support/ declaration_of_conformity.html

and selecting the product applicable.

Operating frequency band: 2400 MHz - 2483.5 MHz

Maximum radio-frequency power: 8.16 dBm EIRP

Manufacturer: RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

The UKCA Mark is a Regulation conformity mark of the United Kingdom.

The CE Mark is a Directive conformity mark of the

European Union.

69

70

Information on the Operating

Manual

An Operating Manual (PDF) containing information on how to use this camera is available. Please download it from our website.

Operating Manual Download:

https://www.ricoh-imaging.com/ manuals/

Memo

71

72

Memo

Memo

RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

(https://www.ricoh-imaging.co.jp)

RICOH IMAGING EUROPE

S.A.S.

RICOH IMAGING AMERICAS

CORPORATION

RICOH IMAGING CANADA

INC.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

(https://www.ricoh-imaging.eu)

2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.

(https://www.us.ricoh-imaging.com)

5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA

(https://www.ricoh-imaging.ca)

RICOH IMAGING CHINA CO.,

Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,

LTD.

Shanghai, 200021, CHINA

(http://www.ricoh-imaging.com.cn) https://www.ricoh-imaging.co.jp/english/

This contact information may change without notice.

Please check the latest information on our websites.

4RFHZ030+

• Specifications and external dimensions are subject to change without notice.

53642 Copyright © RICOH IMAGING COMPANY, LTD. 2022

R01DTG22 Printed in Philippines