Quest Xpert Edition 11.0, Toad for Oracle, SQL Optimizer, for PL/SQL, for Oracle Administration Knowledge Xpert, Toad Data Modeler, Base Edition Toad for Data Analysts, Freeware Toad for MySQL Installation Guide
विज्ञापन
विज्ञापन
Toad
®
for Oracle
Xpert Edition 11.0
Installation Guide
© 2011 Quest Software, Inc.
ALL RIGHTS RESERVED.
This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without the written permission of Quest Software, Inc.
The information in this document is provided in connection with Quest products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Quest products. EXCEPT AS SET FORTH IN
QUEST'S TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR
THIS PRODUCT, QUEST ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-
INFRINGEMENT. IN NO EVENT SHALL QUEST BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR
INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Quest makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Quest does not make any commitment to update the information contained in this document.
If you have any questions regarding your potential use of this material, contact:
Quest Software World Headquarters
LEGAL Dept
5 Polaris Way
Aliso Viejo, CA 92656 email: [email protected]
Refer to our Web site ( www.quest.com
) for regional and international office information.
Trademarks
Quest, Quest Software, the Quest Software logo, Benchmark Factory, Spotlight, Toad, T.O.A.D.,
Toad World, vSpotlight, and vToad are trademarks and registered trademarks of Quest Software,
Inc in the United States of America and other countries. For a complete list of Quest Software’s trademarks, please see http://www.quest.com/legal/trademark-information.aspx
. Other trademarks and registered trademarks are property of their respective owners.
Toad for Oracle Xpert Edition 11.0
Installation Guide
September 30, 2011
Table of Contents
Requirements
About Toad Editions
System Requirements
Required Windows Privileges
Install Toad Editions
Install Toad Editions
License Toad Editions
Silently Install Toad Editions
Extract MSI Files
Install Through Command Line
Install Toad for Oracle Silently
Install Knowledge Xpert Silently
Install SQL Optimizer Silently
Install Toad Data Modeler Silently
Install Toad for Data Analysts Silently
Install Toad for MySQL Silently
Parameters for Silent Installations
Product Licenses
Appendix: Contact Quest
Contact Quest Support
Contact Quest Software
About Quest Software
Index
10
11
11
12
18
21
23
23
23
24
9
9
8
4
4
5
25
1
Requirements
About Toad Editions
By purchasing one of the Toad for Oracle Editions, you have obtained not only a powerful
Oracle application development tool, but other tools to help you maintain and develop your
Oracle database applications.
This guide is an executive overview of the Toad for Oracle Xpert Edition. It provides basic information about installing the products, including system requirements and the use of the
Quest Installer. See the specific Installation Guide for each product for more information about each application, including troubleshooting information.
The following Quest Software applications are included in this edition: l
Toad for Oracle Xpert l
Quest SQL Optimizer for Oracle l
Knowledge Xpert for PL/SQL l
Knowledge Xpert for Oracle Administration l
Toad Data Modeler l
Toad for Data Analysts Base Edition l
Toad for MySQL Freeware
Important: Knowledge Xpert has been moved to a free online wiki, http://oradbpedia.com
. Toad components which use the desktop version of Knowledge Xpert are being changed to reference the online content. Quest recommends using the web version as the desktop version will be desupported on July 31, 2012.
Note: The DB Admin Module can be added to any Toad edition.
In many cases, if functionality is disabled within Toad for Oracle, you may not have an appropriate license to use it. When Toad is running, you can see which components are licensed by selecting Help | About.
Toad for Oracle Xpert Edition Installation Guide
Requirements
System Requirements
Before installing your Toad Edition, ensure your system meets the following minimum hardware and software requirements:
Platform
Memory
Hard Disk
Space
Operating
System
Database
Client
1 GHz processor
512 MB RAM required, 1 GB recommended
Note: The memory required may vary based on the following: l
Applications that are running on your system l
Size and complexity of the database l
Amount of database activity l
Number of concurrent users accessing the database
By Toad Edition:
964 MB
By Product:
Toad for Oracle Xpert Edition
75 MB
90 MB
78 MB
78 MB
160 MB
350 MB
133 MB
Toad for Oracle
Quest SQL Optimizer for Oracle
Knowledge Xpert for PL/SQL
Knowledge Xpert for Oracle Admin
Toad Data Modeler
Toad for Data Analysts Base Edition
Toad for MySQL Freeware
Windows Server 2003 (32-bit and 64-bit)
Windows XP (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows Server 2008 (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
Windows 7 (32-bit and 64-bit)
Note: When running on a 64-bit operating system, you must use the 32bit Oracle Client.
Oracle Client 8.1.7.4
Oracle Client 9.2.0.8
Oracle Client or Instant Client 10.2.0.3/10.2.0.4
Oracle Client or Instant Client 11.2.0.1
Note: Only the 32-bit Oracle client is supported.
5
Toad for Oracle Xpert Edition Installation Guide
Requirements
Database
Server
Cloud
Database
Service
Additional
Software
Oracle 8.0.6; 8.1.7; 9i; 9i R2; 10g R1; 10g R2; 11g R1, 11g R2
Toad has been tested on Oracle Exadata 2.0 running Oracle database 11g
R2.
Important: It is recommended that your client version be of the same release (or later) as your database server. This is an Oracle recommendation to prevent performance issues.
Exceptions:
l
SQL Optimizer—Requires 8.1.7 or later l
Toad for Data Analysts—Requires 9i or later l
Toad Data Modeler—Requires 9i or later l
Toad for MySQL Freeware—Does not support Oracle. See its
Release Notes for supported servers.
Oracle databases running on Amazon EC2
Exceptions:
l
Knowledge Xpert—Has not been tested
Microsoft Internet Explorer 6.0 or later (to view the Release Notes)
Adobe Acrobat Reader 7.0 or later (to view the Installation Guide)
SQL Optimizer:
For Windows 2003 or XP, Microsoft’s .NET Framework 2.0 (Service
Pack 1 or 2), or 3.5 is required.
Note: If you have only the .NET Framework 3.0 installed, you must also install .NET Framework 2.0 and the service pack or you must install
.NET Framework 3.5 (which includes .NET 2.0 with Service Pack 1).
For Windows Vista, Windows 2008, and Windows 7, the necessary .NET
Framework 2.0 files come preinstalled with the operating system.
Toad for Data Analysts and Toad for MySQL Freeware:
Microsoft .NET Framework 3.5 (Service Pack 1)
Note: The following conditions apply: l
If you have the .NET Framework 4.0 installed, you must still install the .NET Framework 3.5 (Service Pack 1).
l
The .NET Framework Client Profile is not supported.
l
To run Toad for Data Analysts, the .NET security policy must be set to unrestricted.
6
Toad for Oracle Xpert Edition Installation Guide
Requirements
Virtualization Support
Before installing your Toad Edition, review the following for virtualization support:
Application
Virtualization
Desktop
Virtualization
(VDI)
Citrix XenApp 5.0 has been tested.
Exceptions:
l
Knowledge Xpert—Has not been tested
Quest vWorkspace 7.0 has been tested.
Exceptions:
l
Knowledge Xpert—Has not been tested l
Toad for MySQL—Has not been tested
Server
Virtualization
VMware ESX Server 3.5 has been tested.
Exceptions:
l
Knowledge Xpert—Has not been tested l
Toad Data Modeler has been tested using VMware Server 2.0
l
Toad for Data Analysts—Has not been tested l
Toad for MySQL—Has not been tested l
SQL Optimizer has been tested using VMware ESX Server 2.0.2
and Oracle VM 2.0
Note: Toad Editions may work in virtualization environments other than the ones listed.
7
Toad for Oracle Xpert Edition Installation Guide
Requirements
8
Required Windows Privileges
In order to install and run Toad for Oracle, make a connection, and do basic operations, you must have the following privileges:
Operating System Requirements
Windows XP
Windows Server
Windows Vista
Windows 7 l
Read access to the Oracle client folder l
Read/write privileges on the Oracle homes directories that you use for your connections l
Be a Power User or Administrator l
Read access to the Oracle client folder l
Read/write privileges on the Oracle homes directories that you use for your connections l
If UAC (user account control) is enabled, you must have administrator privileges
Note: Other functionality in Toad may require additional privileges.
2
Install Toad Editions
Install Toad Editions
You can install any or all of the products that are included in your Toad Edition using the
Quest Installer.
Notes:
l
See the Quest Installer Release Notes for detailed information about the current version of the Quest Installer.
l
You can also install Toad Edition products silently. Silent installation provides a
convenient method for deploying Toad products to multiple machines. See "Extract MSI
Files" (page 11) for more information.
To install a Toad Edition
1. Run the Toad Edition installation program.
2. Complete the wizard. Review the following for additional information:
Destination directory
Individual
Products
Select a directory to install the applications in your Toad edition. The default directory is C:\Program Files\Quest Software.
Note: This directory sets the base directory for the installation of all
Quest products.
Expand a product in the product list to select additional installation features such as install type, installation directory, and so on.
Note: For additional information about other products, see the appropriate product Installation Guide.
Toad for Oracle Xpert Edition Installation Guide
Install Toad Editions
10
License Toad Editions
Beginning with Toad 10.1, all products within a Toad edition share a licensing key. For best results, when you have completed installation of your products, run Toad for Oracle first and enter the license key when prompted. This ensures that all installed products reflect the appropriate license key.
Upgrade Existing Licenses
If you have previously licensed versions of Toad for Oracle or the other products in this edition, your old license keys will continue to work. If you are upgrading to a different edition and have been issued a new key, use the following procedure.
To upgrade an existing license
1. Launch Toad for Oracle.
2. Select Help | Licensing and enter your new license key. Any new features are enabled automatically, and any additional Toad products are licensed using this key.
3
Silently Install Toad Editions
Extract MSI Files
In order to perform a silent install, you must first extract the MSI file from the Quest Installer.
Once the extraction completes, you can easily install all of the selected products through the silent install batch file, or install the products through the command line.
Note: You do not need to install the Quest Installer on any of the computers where you are silently installing Toad products. The Quest Installer is only used to extract the required MSI files.
To extract MSI files from the Quest Installer
1. Run your Toad bundle from the command prompt, including the correct path to the directory where it resides and the
/extract parameter. Since the executable contains spaces, remember to include quotation marks. For example:
2. Complete the wizard. Review the following for additional information:
Product Selection
Page
Select the product you want to extract
Finish Page
Description
Verify that all the products you want to extract display in this list. If a product does not display, you should start over and select an edition that contains all the files.
Description
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
12
"specified location" link
"Readme.txt" link
Click this link to open the directory where your files have been extracted. This directory also includes the silent installation batch file (SilentInstall.bat).
The batch file contains the commands to silently install all the products that you selected from the relative path. The install requires the applicable directories from the locations that you extract to and installs each product to the default directory.
Click this link to open the extraction log as well as the command-line parameters that are needed to perform default installations of the products. This file also defines the order in which the products need to be installed to satisfy the dependencies between the products.
You may want to change parameters to fit your environment or
standards, such as installing to a different directory. See
"Parameters for Silent Installations" (page 18) for more information.
Install Through Command Line
Install Toad for Oracle Silently
To install Toad silently
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter an install command similar to the following: msiexec /i "<path
to msi
file\ToadforOracle_
version.msi>"INSTALLDIR="<installation folder>"
ADDLOCAL=Client,Server/q /l*v <path to install log, including file name>
For example: msiexec /i "C:\Documents and
Settings\Johndoe\desktop\ToadforOracle11.0.exe"INSTALLDIR="C:\Programs\Quest
Software\Toad for Oracle" ADDLOCAL=Client,Server/q /l*v
"C:\install.log"
Install Patches Silently
If you already have Toad installed and want to upgrade silently, you must include
REINSTALLMODE=vo REINSTALL=ALL in the command. If these parameters are not included, the
MSI registers that Toad is already installed and does not upgrade it.
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
13
For example, if you are currently in the directory where the MSI resides, entering the following command installs to the standard location: msiexec.exe /i <path to msi file\ToadforOracle<version>SetupFull.msi>
REINSTALLMODE=vo REINSTALL=ALL
You can also set additional parameters or run the MSI from a location other than the active directory. For example: msiexec /i "C:\Documents and Settings\johndoe\desktop\
ToadforOracleSetupFull.msi REINSTALLMODE=vo REINSTALL=ALL
INSTALLDIR="C:\Programs\Quest Software\Toad for Oracle\" /q /l*v
"C:\install.log"
Uninstall Toad Silently
To uninstall Toad silently
» Enter a command similar to the following: msiexec /x "<path to msi file\ToadforOracle_version.SetupFull.msi>" /q
Install Knowledge Xpert Silently
When silently installing Knowledge Xpert (Oracle Admin and PL/SQL), you must also install the Knowledge Xpert Engine and the Knowledge Xpert Oracle Common components.
To install Knowledge Xpert silently
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: msiexec.exe /i “<path to msi file\KXEngineSetup.msi>" /q /l*v ”path_to_
install_log\KXEngineSetup.msi.log" /qn TARGETDIR=”install_dir\Knowledge
Xpert" ARPSYSTEMCOMPONENT=1 DISABLEADVTSHORTCUTS=1
3. Enter the following command: msiexec.exe /i “<path to msi file\KXOraCommon.msi>" /q /l*v ”<path to
install log\KXOraCommon.msi.log>" /qn TARGETDIR=”install_dir\Knowledge
Xpert" ARPSYSTEMCOMPONENT=1
4. Enter the following command: msiexec.exe /i “<path to msi file\KXOraAdmSetup.msi>" /q /l*v ”<path to
install log\KXOraAdmSetup.msi.log>" /qn TARGETDIR=”install_
dir\Knowledge Xpert" ARPSYSTEMCOMPONENT=1
5. Enter the following command:
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
14 msiexec.exe /i “<path to msi file\KXPLSQLSetup.msi>" /q /l*v ”<path_to_
install_log\KXPLSQLSetup.msi.log>" /qn TARGETDIR=”install_dir\Knowledge
Xpert" ARPSYSTEMCOMPONENT=1
Install SQL Optimizer Silently
To silently install SQL Optimizer in the default directory
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: msiexec /i "<path to msi file\QuestSQLOptimizer_Oracle_Common.msi>” /qn
3. Enter the following command: msiexec /i "<path to msi file\QuestSQLOptimzer_Oracle_version.msi>" /qn
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
15 where
/i = install
/qn = quiet, no UI
To silently install SQL Optimizer in a custom directory
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: msiexec /i "<path to msi file\QuestSQLOptimzer_Oracle_version.msi>" /qn
INSTALLDIR="InstallDir"
Note: Use the INSTALLDIR parameter if you are upgrading and would like to have both the current version and the new version installed. Otherwise, the upgrade overwrites the current version.
Install Toad Data Modeler Silently
To install Toad Data Modeler silently
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data
Modeler version\"
The argument for the silent installation from a command-line is “/q”. To specify a directory where Toad Data Modeler should be installed, use INSTALLDIR=”PATH”.
(Otherwise, the default path is used.)
To specify the database platform where you want to install Toad Data Modeler or which shortcuts should be created and where, use the ADDLOCAL parameter. If this parameter is not used, a default installation is performed.
Example: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data
Modeler
version
\ADDLOCAL=Complete,XPMANIFEST,SUPPORTDATABASES,SHORTCUTUNINSTALL,
SHORTCUTDESKTOP,SHORTCUTSTARTMENU,SHORTCUTQUICKLAUNCH,SHORTCUTHELP,
POSTGRESQL,POSTGRESQL81,POSTGRESQL82
If you use the ADDLOCAL parameter, always select the Complete, XPMANIFEST, and
SUPPORTDATABASES options. These options are required for the correct installation.
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
16
When installing support for a particular database platform, you must install basic support for the selected database platform. For example, to support the Oracle 10g database,
Oracle must also be selected.
Shortcuts
You can use the following to create shortcuts when installing silently:
Command
SHORTCUTUNINSTALL
SHORTCUTDESKTOP
SHORTCUTSTARTMENU
SHORTCUTQUICKLAUNCH
SHORTCUTHELP
Description
Creates a shortcut for uninstall in the Start menu.
Creates a shortcut for Toad Data Modeler on the desktop.
Creates a shortcut for Toad Data Modeler in the Start menu.
Creates a shortcut for Toad Data Modeler in the
Quick Launch bar.
Creates a shortcut for the Help file, User Manual, and
Reference Guide in the Start menu.
Tip: Other parameters for silent installs can be found if you enter the “setup.msi ?” command.
Install Toad for Data Analysts Silently
Before you perform a silent installation, you must install the following software on every computer where you are installing Toad for Data Analysts Base Edition: l
Microsoft .NET Framework 3.5 (Service Pack 1) l
(Existing DB2 client on system) Toad for Data Analysts installs a DB2 9.7 client as part of the installation process. The DB2 9.7 client can co-exist with an existing DB2 8 client; however, it is incompatible with a DB2 7 client. If a DB2 7 client is already installed on the system, the installation stops and cannot complete. You must first upgrade to the DB2 8 client. Then restart the installation to avoid losing functionality in some DB2 native tools.
To install Toad for Data Analysts silently
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: msiexec /i “<path to msi file\ToadforDataAnalysts_version.msi>” /q
You can use an msi logging switch to include an install log by entering the following:
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
17 msiexec /i “<path to msi file\ToadforDataAnalysts_version.msi>” /q /L*v
path_to_verboseLog.txt
You can override the following optional properties:
INSTALLDIR
READONLY
ApplicationUsers
Specify a folder other than default installation folder
Enter TRUE if you want to install as read-only
Enter "AllUsers" to install the product for all users, Enter
"OnlyCurrentUser" to install the product only for the user that performs the installation.
The following is an example command to install as read-only for all users to a user selected folder: msiexec /i “path_to_installer.msi” INSTALLDIR= “Your_install_path”
READONLY=TRUE ApplicationUsers=”AllUsers” /q
Install Toad for MySQL Silently
Before you perform a silent installation, you must install Microsoft .NET Framework 3.5 (Service
Pack 1) on every computer where you are installing Toad for MySQL.
To install Toad for MySQL Silently
1. Extract the MSI from the Quest Installer. See "Extract MSI Files" (page 11) for more information.
2. Enter the following command: msiexec /i “<path to msi file\ToadforMySQL_version.msi>” /q
You can override the following optional properties:
INSTALLDIR
READONLY
ApplicationUsers
Specify a folder other than default installation folder
Enter TRUE if you want to install as read-only
Enter "AllUsers" to install the product for all users, Enter
"OnlyCurrentUser" to install the product only for the user that performs the installation.
The following is an example command to install as read-only for all users to a user selected folder: msiexec /i “path_to_installer.msi” INSTALLDIR= “Your_install_path”
READONLY=TRUE ApplicationUsers=”AllUsers” /q
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
Parameters for Silent Installations
The following parameters are available for a silent installation:
Option
/l
Parameter
Package|ProductCode
Description
Installs or configures the product.
18
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
19
/a
/x
/l
Option
/f
Parameter
[p|o|e|d|c|a|u|m|s|v]
Package|ProductCode
Package
Package/ProductCode
[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*]
Logfile
Description
Repairs the product. This option ignores any property values entered in the command-line. The default argument list for this option is 'omus.' The following options are available: l p—Reinstalls only if a file is missing.
l o—Reinstalls if a file is missing or an older version is installed.
l e—Reinstalls if a file is missing or an equal or older version is installed.
l d—Reinstalls if a file is missing or a different version is installed.
l c—Reinstalls if a file is missing or the stored checksum does not match the calculated value. This option only repairs files that have msidbFileAttributesChecksum in the Attributes column of the File table.
l a—Forces all files to be reinstalled.
l u—Rewrites all required, userspecific registry entries.
l m—Rewrites all required, computer-specific registry entries.
l s—Overwrites all existing shortcuts.
l v—Runs from source and recaches the local package. Do not use this option for the initial installation of the product or feature.
Installs the product on the network.
Uninstalls the product.
Writes logging information to a logfile in the specified path. The path to the
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
Option Parameter
/q n|b|r|f
20
Description
logfile location must already exist. The installer does not create the directory structure for the logfile. Flags indicate which information to log. If no flags are set, the default is 'iwearmo.' The following options are available: l i—Status messages.
l w—Nonfatal warnings.
l e—All error messages.
l a—Start up of actions.
l r—Action-specific records.
l u—User requests.
l c—Initial UI parameters.
l m—Out-of-memory or fatal exit information.
l o—Out-of-disk-space messages.
l p—Terminal properties.
l v—Verbose output.
l x—Extra debugging information.
Only available on Windows
Server 2003.
l
+—Append to existing file.
l
!—Flush each line to the log.
l
"*"—Log all information except for the v and x options. To include the v and x options, enter
"/l*vx".
Sets the user interface level. Review the following options: l q, qn—No UI l qb—Basic UI. Use qb! to hide the Cancel button.
l qr—Reduced UI with no modal dialog box displayed at the end of the installation.
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
21
Option Parameter
RESTRICTIONS p
Description
l qf—Full UI and any authored
FatalError, UserExit, or Exit modal dialog boxes at the end.
l qn+—No UI except for a modal dialog box displayed at the end.
l qb+—Basic UI with a modal dialog box displayed at the end.
The modal box does not display if you cancel the installation. Use qb+! or qb!+ to hide the Cancel button.
l qb- —Basic UI with no modal dialog boxes. Note that /qb+- is not a supported UI level. Use qb-
! or qb!- to hide the Cancel button.
Note: The ! option is available with
Windows Installer 2.0 and works only with basic UI. It is not valid with the full UI.
Prevents users from saving their connection password by disabling the
Save password field in the Database
Login window. For example:
RESTRICTIONS=p
Product Licenses
You can install a license as part of the silent install process by pushing a windows registry file to the target machine and importing it to the registry.
Configure the License File
When a silent install is performed, a License Key template (Questkey.reg) is extracted into the selected directory. You can use this template to enter the key(s) that you would like to use on the target PC.
The following represents the contents of the sample registry key:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\{08439167-4CA5-48E9-A810-A3A7C0B80B06}]
[HKEY_CURRENT_USER\Software\{08439167-4CA5-48E9-A810-A3A7C0B80B06}\Local]
Toad for Oracle Xpert Edition Installation Guide
Silently Install Toad Editions
22
[HKEY_CURRENT_USER\Software\{08439167-4CA5-48E9-A810-
A3A7C0B80B06}\Local\REPLACE_WITH_KEY]
"SiteMessage"="REPLACE_WITH_SITEMESSAGE"
"ProductName"="REPLACE_WITH_PRODUCTNAME"
"ProductVersion"="REPLACE_WITH_PRODUCTVERSION"
Review the following to configure the license file: l
Do not change the first two lines as they are the key entries to add a license.
l
In the template, replace “REPLACE_WITH_????” with the relevant information supplied with your license.
l
Since the license key is used to create a folder in the registry, you can add additional licenses in the same file by replicating the last four lines.
l
The license(s) are ready for use once the Questkey.reg file has been pushed and imported to the registry and the entries are available on the remote machine.Any
product that is run in the Toad bundle reads and validates the license and removes the entries from the registry.
l
Your product(s) are ready for use when the license is validated.
Appendix: Contact Quest
Contact Quest Support
Quest Support is available to customers who have a trial version of a Quest product or who have purchased a Quest product and have a valid maintenance contract. Quest Support provides unlimited 24x7 access to SupportLink, our self-service portal. Visit SupportLink at http://support.quest.com
.
From SupportLink, you can do the following: l
Retrieve thousands of solutions from our online Knowledgebase l
Download the latest releases and service packs l
Create, update and review Support cases
View the Global Support Guide for a detailed explanation of support programs, online services, contact information, policies and procedures. The guide is available at: http://support.quest.com
.
Toad for MySQL Freeware
Please be advised before installing: Toad for MySQL is an official Quest Software Inc. Freeware
Product. This license does not entitle Licensee to receive technical support from Quest.
Get the latest product information and find helpful resources at the Toad for MySQL Community at http://toadformysql.com
.
Contact Quest Software
Mail [email protected]
Quest Software, Inc.
World Headquarters
5 Polaris Way
Aliso Viejo, CA 92656
USA
Web site www.quest.com
See our web site for regional and international office information.
Toad for Oracle Xpert Edition Installation Guide
Appendix: Contact Quest
24
About Quest Software
Quest Software simplifies and reduces the cost of managing IT for more than 100,000 customers worldwide. Our innovative solutions make solving the toughest IT management problems easier, enabling customers to save time and money across physical, virtual and cloud environments. For more information about Quest go to www.quest.com
.
Index
Citrix support editions about installing licensing
C
E
N
network, silent nstallation
P
parameters, silent install privileges, for installation
Product Licenses
Q
Quest Installer, extract MSI files
R
requirements privileges system
S
files, extract MSI
install
Knowledge Xpert silently parameters for silent silently
I
SQL Optimizer silently
Toad Data Modeler silently
Toad for Data Analysts silently
Toad for MySQL silently
Toad for Oracle silently
K
Knowledge Xpert, command line parameters13
L
license Toad editions
MSI files, extracting
F
M
silent installation extract MSI files
Knowledge Xpert parameters
SQL Optimizer
Toad Data Modeler
Toad for Data Analysts
Toad for MySQL
SilentInstall.bat
SQL Optimizer, command line parameters14
system requirements
T
Toad Data Modeler, command line parameters15
Toad for Data Analysts, command line parameters16
Toad for MySQL, command line parameters17
Toad for Oracle, command line parameters12
Toad for Oracle Xpert Edition Installation Guide
Index
U
uninstall silently
VDI virtualization support
VMWare vWorkspace
V
26
डाउनलोड
सार्वजनिक लिंक अपडेट किया गया
आपकी चैट का सार्वजनिक लिंक अपडेट कर दिया गया है. You may view and manage your chat links after registration here.
दस्तावेज़ सार्वजनिक लिंक
विज्ञापन
