Miele CVA 7440 Built-in coffee machine Operating Instructions

Add to My manuals
88 Pages

advertisement

Miele CVA 7440 Built-in coffee machine Operating Instructions | Manualzz

Operating and installation instructions

Built-in coffee machine

To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.

en – AU, NZ M.-Nr. 11 859 650

Caring for the environment

Disposal of the packing material

The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled.

Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation.

Disposing of your old appliance

Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety. These could be hazardous to human health and to the environment if disposed of with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with your household waste.

Please dispose of it at your local community waste collection / recycling centre for electrical and electronic appliances. You are also responsible for deleting any personal data that may be stored on the appliance prior to disposal. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.

2

Contents

Caring for the environment ..............................................................................

2

Warning and Safety instructions ......................................................................

6

Guide to the appliance ..................................................................................... 15

Controls and display ......................................................................................... 17

Operating principles .......................................................................................... 19

Symbols in the display ........................................................................................ 21

Miele@home ....................................................................................................... 22

Before using for the first time .......................................................................... 23

Before using for the first time .............................................................................. 23

Switching on for the first time ............................................................................. 23

Filling the coffee bean container ..................................................................... 25

Filling the water container ................................................................................ 26

Switching on and off ......................................................................................... 27

Spout adjustment .............................................................................................. 28

Making drinks .................................................................................................... 29

Making coffee drinks with and without milk........................................................ 29

Milk preparation................................................................................................... 30

Making a coffee drink.......................................................................................... 31

Cancelling preparation ........................................................................................ 31

DoubleShot.......................................................................................................... 31

Making 2 portions (   sensor)............................................................................. 32

Coffee pot............................................................................................................ 32

Tea ....................................................................................................................... 33

TeaTimer......................................................................................................... 34

Making tea...................................................................................................... 34

Teapot............................................................................................................. 35

Preparing warm and hot water ............................................................................ 35

Expert mode ....................................................................................................... 36

Grinder setting ................................................................................................... 37

Parameters ......................................................................................................... 38

Displaying and changing parameters .................................................................. 38

Portion size.......................................................................................................... 38

Amount of coffee................................................................................................. 39

3

Contents

Brewing temperature ........................................................................................... 39

Pre-brewing ground coffee.................................................................................. 39

User profiles ....................................................................................................... 40

Creating a profile ................................................................................................. 40

Changing drinks in a profile................................................................................. 40

Preparing User profile drinks............................................................................... 40

Editing profiles..................................................................................................... 40

Setting change of profile ................................................................................ 40

Changing a name ........................................................................................... 40

Deleting a profile ............................................................................................ 41

MobileStart ......................................................................................................... 42

Settings .............................................................................................................. 43

Displaying and changing Settings....................................................................... 43

Language............................................................................................................. 43

Time of day.......................................................................................................... 43

Date ..................................................................................................................... 43

Timer ................................................................................................................... 43

Switch on at ................................................................................................... 43

Switch off at ................................................................................................... 44

Switch off after ............................................................................................... 44

TeaTimer.............................................................................................................. 44

Volume................................................................................................................. 44

Display brightness............................................................................................... 44

Lighting................................................................................................................ 44

Info (display information) ..................................................................................... 44

Altitude ................................................................................................................ 44

Performance mode.............................................................................................. 44

Eco mode ....................................................................................................... 45

Barista mode .................................................................................................. 45

Latte mode ..................................................................................................... 45

Party mode ..................................................................................................... 45

Water hardness ................................................................................................... 45

System lock  .................................................................................................... 46

Miele@home ........................................................................................................ 47

Remote control.................................................................................................... 47

RemoteUpdate .................................................................................................... 47

Software version.................................................................................................. 48

Showroom programme (Demo mode) ................................................................. 48

Factory default settings ....................................................................................... 48

4

Contents

Cleaning and care ............................................................................................. 49

Cleaning intervals - Quick guide ......................................................................... 49

Cleaning by hand or in the dishwasher ............................................................... 50

Unsuitable cleaning agents ................................................................................. 51

Cleaning the drip tray and waste container......................................................... 52

Cleaning the drip tray cover ................................................................................ 54

Cleaning the water container .............................................................................. 54

Cleaning the central spout .................................................................................. 55

Cleaning the cup rim sensor ............................................................................... 57

Cleaning the milk flask with lid ............................................................................ 57

Cleaning the milk valve (daily) ............................................................................. 58

Removing and cleaning the milk valve (once a month) ....................................... 58

Cleaning the bean containers.............................................................................. 61

Removing the brew unit and cleaning by hand ................................................... 62

Cleaning the interior, the inside of the appliance door and the drip catcher ...... 63

Cleaning the appliance front ............................................................................... 64

Maintenance programmes................................................................................... 65

Rinse appliance ................................................................................................... 65

Rinsing the milk pipework ................................................................................... 65

Degreasing the brew unit and cleaning the interior............................................. 66

Descaling the appliance ...................................................................................... 68

Problem solving guide ...................................................................................... 71

Messages in the display...................................................................................... 71

Unusual performance of the coffee machine ...................................................... 74

Unsatisfactory results.......................................................................................... 77

After sales service and warranty ..................................................................... 79

Contact in case of fault ....................................................................................... 79

Warranty .............................................................................................................. 79

Accessories ....................................................................................................... 80

Installation .......................................................................................................... 81

Electrical connection ........................................................................................... 81

Installation dimensions........................................................................................ 82

Building in the coffee machine ............................................................................ 84

Door opening limiters .......................................................................................... 85

Technical data .................................................................................................... 86

5

Warning and Safety instructions

This coffee machine complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property.

Read the Operating instructions carefully before using the coffee machine. They contain important information on the safety, installation, use and maintenance of the appliance. Familiarity with these instructions will help to prevent personal injury and damage to property.

In accordance with standard IEC 60335-1, Miele expressly and strongly advises that you read and follow the instructions in

“Installation”, as well as in the “Warning and Safety instructions”.

Miele cannot be held liable for damage caused by non-compliance with these instructions.

Keep these instructions in a safe place and pass them on to any future owner.

6

Warning and Safety instructions

Correct application

 The coffee machine is intended for use in private households.

 The coffee machine is not suitable for outdoor use.

 This coffee machine must not be used at altitudes above 2,000 m.

 The machine is intended only for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea etc. Any other usage is at the owner's risk.

 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety, and are able to recognise the dangers of misuse.

7

Warning and Safety instructions

Safety with children

 Danger of burning and scalding on the dispensing spouts.

Children's skin is far more sensitive to high temperatures than that of adults.

Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.

 Install the coffee machine out of reach of children.

 Young children must not be allowed to use this appliance.

 Older children may only use the coffee machine if its operation has been clearly explained to them and they are able to use it safely.

They must be aware of the potential dangers caused by incorrect operation.

 Children should be supervised when they are near the coffee machine. Do not allow them to play with it or to use the controls.

 Young children must not be allowed to clean the coffee machine.

Cleaning may only be carried out by older children under the supervision of an adult.

 Remember that coffee and espresso are not suitable drinks for children.

 Danger of suffocation! Whilst playing, children may become entangled in packaging material (such as plastic wrapping) or pull the packaging material over their head, presenting the risk of suffocation. Keep packaging material away from children.

8

Warning and Safety instructions

Technical safety

 Repairs and installation work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Installation work and repairs to electrical appliances must only be carried out by a Miele approved service technician.

 A damaged appliance is dangerous. Check it for any visible damage. Never install or attempt to use a damaged appliance.

 Before connecting the appliance to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt.

 The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system. It is most important that this basic safety requirement is present and tested regularly and, where there is any doubt, the household wiring system should be inspected by a qualified electrician.

 Temporary or permanent operation with a self-sufficient or nonmains synchronous energy supply system (e.g. isolated networks, back-up systems) is possible. A requirement for the operation is that the energy supply system complies with all current local and national requirements that apply to stand-alone, solar and/or battery systems.

The protective measures provided in the installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or replaced with equivalent measures in the installation.

 Do not connect the machine to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guarantee the safety of the appliance (e.g. danger of overheating).

9

Warning and Safety instructions

 This appliance must not be installed and operated in mobile installations (e.g. on a ship).

 For safety reasons, this appliance may only be used when it has been built in.

 If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except in combination with a built-in warming drawer).

 Only use the coffee machine in rooms where the ambient temperature is between +16 °C and +38 °C.

 A minimum installation height of 850 mm must be maintained.

 This coffee machine must not be installed behind a closed furniture door. Heat and moisture can build up behind the closed furniture door. This can result in damage to the appliance and/or furniture unit.

 Before any repair work is carried out, the appliance must be completely disconnected from the electricity supply.

The appliance is only completely isolated from the electricity supply when:

- it is switched off at the circuit breaker, or

- the mains connection cable is disconnected from the power supply.

Pull the plug, not the cord, to disconnect the appliance from the power supply.

 The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele approved service technician.

 Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.

10

Warning and Safety instructions

Correct use

 Danger of burning and scalding on the dispensing spouts.

The liquids and steam dispensed are very hot.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Do not touch hot components.

Hot liquid or steam could spatter from the spouts. Ensure that the central spout is clean and fitted correctly.

If there is a cup or container underneath the central spout, make sure that you remove this before opening the appliance door.

Water in the drip tray can also be very hot. Take care when emptying it.

 Risk of injury to the eyes!

Never look directly at the lighting or use optical instruments

(magnifying glass or similar) to look at it.

 Please note the following regarding water:

- The water quality must conform to the requirements for drinking water in the country in which the coffee machine is being used.

- Only use cold, fresh tap water to fill the water container. Hot or warm water or other liquids can damage the coffee machine.

- Change the water every day to prevent a build-up of bacteria.

- Do not use carbonated water.

 Only put roasted coffee beans in the bean container. Do not put coffee beans containing additives or ground coffee in the bean containers.

 Do not fill the bean container with any type of liquid.

11

Warning and Safety instructions

 Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins.

 Do not use coffee beans which have been treated with caramel, sugar or other substances. Sugar will damage the coffee machine.

 Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework.

 If using cow's milk, only use pasteurised milk to prevent a buildup of bacteria in the appliance.

 When making tea, please follow the instructions on the packaging.

 Do not place flaming alcohol mixtures underneath the central spout. The flames could ignite plastic components and cause them to melt.

 Do not swing from or hang anything on the appliance door when it is open as this could damage the hinges on the coffee machine.

 The machine must not be used for cleaning objects.

12

Warning and Safety instructions

Accessories and spare parts

 Miele can only guarantee the safety of the appliance when original

Miele spare parts are used. Faulty components must only be replaced by original Miele spare parts.

 Only use original Miele spare parts and accessories. If other spare parts and accessories are used, warranty, performance and/or product liability claims will be invalidated and Miele cannot accept liability.

 Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your coffee machine.

Cleaning and care

 Clean the coffee machine and the milk flask daily, particularly before using for the first time.

 All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning.

 Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agents or the use of a descaling agent which is not of the appropriate concentration.

 Degrease the brew unit regularly with Miele cleaning tablets.

Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly.

 Do not clean the machine with a steam cleaner or immerse it in water as this will damage the machine. Steam or water could reach the electrical components and cause a short circuit.

13

Warning and Safety instructions

 Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it.

The following applies to appliances with stainless steel surfaces:

 Do not adhere stickers, adhesive tape or any other adhesive materials to stainless steel surfaces. The coating on the stainless steel surfaces will become damaged and lose its protective properties against soiling.

 Stainless steel scratches very easily and even magnets can cause damage to the surface.

14

Exterior view

1

6

Guide to the appliance

2

3

4

5 a On/Off  sensor b Control panel c Door handle d Automatic height-adjustable central spout with lighting e Drip tray cover f Milk flask

15

Guide to the appliance

Interior view a Bean container b Milk valve c Automatic height-adjustable central spout with lighting d Grinder setting e Bean container f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Drip catcher

16

Controls and display

6 a On/Off    sensor

For switching the coffee machine on and off b Drink sensors

For making drinks c Display

For showing information about the current action or status d   sensor

– For selecting more drinks, e.g.

Ristretto, Cappuccino Italiano

– For selecting Coffee pot or Teapot

– Settings  menu e User profiles     sensor

For creating and managing profiles f Maintenance     sensor

Maintenance programmes, e.g.

Descale g Parameters     sensor

For displaying and changing drink settings h OK  sensor

For confirming display messages and saving settings i Navigation area with arrow sensors  

For scrolling through lists of options, highlighting a selection or changing values j “Back”   sensor

For going back a menu level and cancelling unwanted actions k "2 portions“  sensor

For dispensing two portions of a drink at the same time l “DoubleShot”   sensor

For a making a particularly strong and aromatic coffee with twice the amount of ground coffee, but the same amount of water m Optical interface

(for service technicians only)

17

Controls and display

Drink sensor symbols

Espresso

Coffee

Long coffee

Cappuccino

Latte macchiato

Cafè latte

Hot milk

Milk froth

Tea water

18

Operating principles

Sensor controls

To operate the coffee machine, touch the sensors with your finger.

An audible signal is generated each time a sensor is touched. You can adjust the volume of the signal tones or switch the tones off (see “Settings –

Volume”).

Drinks menu

When Select drink appears in the display, you are in the drinks menu:

Miele 12:00

Select drink

Touch OK to confirm your selection.

Selecting a menu and navigating within a menu

To select a menu, touch the relevant sensor, e.g. the   sensor.

Miele

Settings 

Ristretto

Cappuccino Italiano

12:00

You will then be able to start an action or change settings in the menu. A bar on the right-hand side indicates that further options or text are available.

The setting in a list which is currently selected will have a tick   beside it.

You can find more drinks in the Other

(  sensor) menu.

Navigation area

To select an option, touch the  or  arrow sensor until the option you want is highlighted.

Exiting a menu or cancelling an action

Touch the  sensor to exit the current menu.

Alternatively, touch the sensor highlighted in orange to return to the drinks menu.

To scroll faster, swipe left or right in the area between the arrows.

The OK sensor lights up orange as soon as a value, prompt or setting can be confirmed.

Entering a name

Letters and numbers are entered via the navigation area. You can select both upper and lower case letters.

Useful tip: It is best to select short, memorable names.

19

Operating principles

Name

Z     A B C D E F

- To enter a character, highlight a character and confirm the selection with OK .

- To delete a character, touch the

  sensor.

- A name is saved by selecting the tick   and confirming with OK .

20

Operating principles

Symbols in the display

The following symbols may also appear in the display in addition to the text and drinks symbols:

Symbol

Explanation

This symbol indicates the “Settings” menu and the

“Language” menu option.

This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information.

This symbol appears if the system lock is activated.

Operation is locked.

This symbol and the desired switching on time appear in the display up to 23:59 hours before the coffee machine is due to switch on if the Switch on at timer and the time display are activated (see “Settings - Timer”).

The TeaTimer minute minder has been started (see “Tea -

TeaTimer”). The remaining brewing time is shown next to the symbol.

This symbol appears while the appliance is being descaled.

(This symbol can also be found on the water container: fill up to this mark).

The symbol is displayed during the Clean milk pipework maintenance programme.

(This symbol can also be found on the water container: fill up to this mark with water.)

If Miele@home is activated for the coffee machine, the Wi-Fi connection is indicated with these symbols. The symbols indicate the strength of the Wi-Fi connection in gradations from strong to not connected.

21

Miele@home

Your coffee machine is equipped with an integrated Wi-Fi module.

To use this feature, you will need:

- a Wi-Fi network

- the Miele App

- a Miele user account. You can create a user account via the Miele App.

The Miele App will guide you through the process of connecting your coffee machine to your home Wi-Fi network.

Once your coffee machine is connected to your Wi-Fi network, you can use the

App, for example, to carry out the following activities:

- Call up information on the operating status of your coffee machine

- Change the settings of your coffee machine

- Operate your coffee machine remotely

Connecting your coffee machine to your

Wi-Fi network will increase energy consumption, even when the coffee machine is switched off.

Before installing the coffee machine in its final location, ensure the signal strength of your Wi-Fi network is sufficient.

failures. Therefore, a constant availability of featured functions cannot be guaranteed.

Miele@home availability

The ability to use the Miele App depends on the availability of the

Miele@home service in your country.

The Miele@home service is not available in every country.

For information about availability, please visit www.miele.com.

Miele App

You can download the Miele App from the Apple App Store

®

or the Google

Play Store™ free of charge (only functional in selected countries).

Availability of the Wi-Fi connection

The Wi-Fi connection shares a frequency range with other appliances

(including microwave ovens and remote control toys). This may result in sporadic or even complete connection

22

Before using for the first time

Before using for the first time

 Connect the coffee machine to the mains electricity supply.

 Install the coffee machine.

 Remove any protective foil and stickers from the machine. Exception:

Please do not remove any labels (e.g.

the data plate) which are visible when you pull out the lower panel.

 Remove the protective foil from the drip tray cover.

 Clean the water container, the bean containers and the central spout.

 Remove the water container and fill it with fresh, cold tap water. Only fill the water container up to the “max.” marker and then refit it in the machine

(see "Filling the water container").

 Remove the bean container and fill it with roasted coffee beans.

Switching on for the first time

 Touch the On/Off   sensor.

Selecting the display language

 Select the required display language.

You might also be asked for your location.

The choice of location determines how the time of day is displayed, e.g. in the

12 or 24-hour format, as well as how units are displayed and so on.

The following appears during set-up:

Set up “Miele@home”

Useful tip: You can also set up

Miele@home for your coffee machine at a later time. In this case, select Skip .

 Make sure that the signal of your Wi-

Fi network is sufficiently strong in the place where you want to set up your coffee machine.

 Touch Continue .

 Select the connection method you wish to use.

 Follow the instructions provided in the coffee machine display and in the

Miele App.

Connection successfully established appears in the display.

 Touch Continue to continue setting up.

Setting the date

 Enter the current date and touch  OK .

Setting the time of day

 Enter the current time of day and touch  OK .

If the coffee machine has been connected to a Wi-Fi network and is signed into the Miele App, the time will be synchronised based on the location setting in the Miele App.

Setting up the network (Miele@home)

You can connect your coffee machine to your local Wi-Fi network.

Setting the water hardness level

Contact your local water supplier to find out your local water hardness range if necessary.

See “Settings - Water hardness” for more information.

23

Before using for the first time

 Enter the local water hardness level

(in °dH) and confirm with OK .

Selecting Performance mode

Select the most suitable mode depending on your coffee preferences

(see “Settings - Performance mode”).

Eco mode : This is an energy saving mode.

Barista mode : This mode is optimised for perfect coffee enjoyment.

Latte mode : In this mode drinks with milk can be made significantly faster.

 Select the required mode and confirm this with OK .

Your machine has been successfully set up and is ready for use.

To ensure that any coffee residues from the factory testing process are removed from the brewing system, please pour away the first two cups of coffee when using the coffee machine for the first time.

24

Filling the coffee bean container

Coffee or Espresso can be made from whole roasted coffee beans which are freshly ground for each portion. This requires the coffee bean container to be filled with coffee beans.

 Risk of damage to the grinder due to incorrect operation.

The coffee machine will be damaged if the bean container is filled with unsuitable substances such as liquids, ground coffee or coffee beans treated with sugar, caramel or similar.

In addition, green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans can damage the grinder. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins.

Only put roasted coffee beans in the bean container.

There are two bean container drawers at the top right and left of the coffee machine. The coffee beans from all three bean containers are mixed together when ground.

 Open the appliance door.

 Pull out the coffee bean containers.

 Remove each lid and fill the bean containers with roasted coffee beans.

 Close the bean containers with their respective lids.

 Insert the coffee bean container drawers fully in the coffee machine.

Close the appliance door.

25

Filling the water container

 Risk to health due to contaminated water.

Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health.

Change the water in the water container every day .

Pour out the water from the water container if a drink has not been prepared for a long time.

 Risk of damage due to incorrect operation.

Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine.

Carbonated water leaves too much limescale in the coffee machine.

Only use cold, fresh tap water to fill the water container.

 Pull the water container out to remove it.

 Fill the water container with fresh, cold drinking water up to the max.

mark.

 Insert the water container in the machine and close the appliance door.

 Open the appliance door.

26

Switching on and off

Switching the coffee machine on

 Touch the On/Off   sensor.

The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout.

You can now make drinks.

If the coffee machine is already at operating temperature, rinsing will not take place.

Switching the coffee machine off

 Touch the On/Off   sensor.

If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off.

While dispensing a drink or during maintenance processes, moisture builds up in the coffee machine. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified.

You will hear an accompanying noise.

Switching off for longer periods of time

If the coffee machine is not going to be used for a longer period of time, e.g. if you are going on holiday, please do the following:

 Empty the drip tray, the waste container and the water container.

 Clean all parts thoroughly, including the brew unit and the interior of the machine.

 Switch the coffee machine off.

27

Spout adjustment

The height of the central spout cannot be manually adjusted.

Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used.

When the coffee machine is switched off, the central spout moves to a medium height.

When a maintenance programme is being carried out, the central spout will move to the height of the cleaning container or into a lower maintenance position.

Ensure the central spout is in either the upper or middle position before opening the door.

28

Making drinks

 Danger of burning and scalding on the dispensing spouts.

The liquids and steam dispensed are very hot and can cause scalding.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Do not touch hot components.

Making coffee drinks with and without milk

The following drinks can be made:

Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with much less water.

Espresso is a strong aromatic coffee with a thick hazelnut brown coloured froth - known as the crema - on top.

We recommend using espresso roasted coffee beans to make an espresso.

Coffee differs from espresso by the increased amount of water and the roast of the beans.

We recommend using coffee beans with the appropriate roast to make the coffee.

Long coffee is a coffee with considerably more water.

Long black is made with hot water and two shots of espresso.

Caffè Americano consists of equal proportions of espresso and hot water. The espresso is made first, then the hot water is dispensed.

Cappuccino consists of approx. 2/3 milk froth and 1/3 espresso.

Latte macchiato consists of 1/3 each of hot milk, milk froth and espresso.

Caffè latte consists of hot milk and espresso.

Cappuccino Italiano has the same proportions of milk froth and espresso as a cappuccino. The difference is that the espresso is added first and then the milk froth.

Espresso macchiato is an espresso with a small amount of milk froth on top.

Flat white is a special variation of the cappuccino: a much greater amount of espresso compared to milk froth creates an intensive coffee aroma.

Café au lait is a French coffee speciality made from coffee and milk froth. Café au lait is normally served in a bowl.

Hot milk or milk froth can also be made separately.

29

Making drinks

Milk preparation

Additives containing sugar or milk alternatives, e.g. soy milk, can clog the milk pipework and milk carrying parts. Residues from unsuitable liquids may adversely affect correct preparation.

Do not use milk with additives.

Use only pasteurised cow's milk.

Useful tip: Using cold cow's milk

(< 10 °C) with a protein content of at least 3% will produce the perfect milk froth.

You can select milk with a fat content according to preference. With full cream milk (at least 3.5% fat), the milk froth will be slightly creamier than with lowfat milk.

Milk flask

Milk is not cooled in the milk flask.

Use cold milk (< 10 °C) to produce a good quality milk froth.

a Lid b Milk suction tube c Milk level sensor rod d Glass milk flask

30

Making drinks

Filling and fitting the milk flask

 Fill the milk flask with milk up to a maximum of 2 cm below the rim. Seal the milk flask with the lid.

Making a coffee drink

 Push the milk flask into the coffee machine until it clicks into place.

Useful tip: The milk flask is easier to remove with two hands.

 Place a cup or glass under the central spout.

 Touch the sensor for the drink you want.

Preparation will begin and the coffee will be dispensed into the cup or glass from the central spout.

Cancelling preparation

 Touch the symbol illuminated in orange on the control panel again.

If you are making drinks with more than one component, e.g. latte macchiato, you can cancel the preparation of each component early.

 Touch  OK when Stop appears in the display.

DoubleShot

Select the DoubleShot   function to make a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through brewing. Due to the reduced extraction time, fewer unwanted aromas and bitter substances are released.

31

Making drinks

DoubleShot can be activated for all coffee drinks except "Ristretto" and

"Long black".

Making a DoubleShot   of coffee

 Touch the  sensor immediately before or after you have started making a drink.

Preparation starts and the  sensor lights up. Two portions of coffee beans will be ground and brewed.

Making 2 portions (   sensor)

You can also dispense two portions of a drink into one large cup or dispense two portions into two cups at the same time.

Coffee pot

You can make several cups of coffee one after the other automatically with the Coffee pot function (max. 1 litre).

The drinks menu is displayed.

Useful tip: Before starting Coffee pot , ensure the bean containers and the water container are sufficiently filled.

 Place a sufficiently large container under the central spout.

 Touch the   sensor.

 Select Coffee pot and confirm with

OK .

 Select the number of portions you want to dispense (3 to 8).

Each cup of coffee will be brewed and dispensed individually. The display will inform you about the progress.

Cancelling preparation

 Touch the   sensor.

 To prepare two cups at the same time, place one cup under each of the coffee spouts.

 Touch the  sensor immediately before or after you have started making a drink.

The   sensor lights up.

The dispensing starts and 2 portions of the desired drink will be dispensed.

32

Making drinks

Tea

This coffee machine is not intended for commercial or scientific purposes.

Temperatures given are approximate and can vary according to ambient conditions.

To make tea, you can select from the following options:

Japanese tea is a high quality green tea and has a delicate, fresh, “green” flavour.

Dispensing temperature: approx. 65 °C; brewing time: approx. 1.5 minutes

White tea is a green tea where only the young buds of the tea plant, which are still white, are used and processed very gently. White tea has a particularly mild flavour.

Dispensing temperature: approx. 70 °C; brewing time: approx. 2 minutes

Green tea gets its green colour from the leaves of the tea plant. The tea leaves are processed gently in different ways – either roasted or steamed – depending on the region.

Green tea can be infused multiple times.

Dispensing temperature: approx. 80 °C; brewing time: approx. 2.5 minutes

Black tea gets its dark colour and typical flavour from the fermentation of the tea leaves. Black tea can be drunk with a little lemon or with milk.

Dispensing temperature: approx. 97 °C; brewing time: approx. 3 minutes

Chai latte has its origins in the traditional Ayurveda medicine as a black tea with typically Indian spices and milk. The milk mellows the spices and tops off the flavour experience.

Dispensing temperature: approx. 97 °C; brewing time: approx. 3 minutes

Herbal tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants.

Dispensing temperature: approx. 97 °C; brewing time: approx. 8 minutes

Fruit tea consists of dried pieces of fruit and/or parts of plants, e.g. rose hip. The flavour varies depending on the plants used and their blend.

Many fruit teas are also flavoured.

Dispensing temperature: approx. 97 °C; brewing time: approx. 8 minutes

The type of tea determines the preset temperature.

The respective dispensing temperatures are recommended by Miele for making these types of tea.

You can change the dispensing temperatures of individual teas by changing the brewing temperature for a particular tea (see “Parameters -

Brewing temperature”). Temperatures given are approximate and can vary according to ambient conditions.

Whether you use loose tea leaves, blended tea or tea bags depends on your own personal preferences.

33

Making drinks

Follow the instructions for making tea on the tea packaging.

The amount of tea to use varies from one type of tea to the next. Always follow the recommendations of the manufacturer on the packaging or of the supplier. The amount of hot water used can be adjusted depending on the type of tea and the size of the cup (see

“Portion size”)

TeaTimer

You can use the TeaTimer function to start a minute minder when making tea.

A specific brewing time is preset for the selected type of tea. You can change the preset brewing time (max. 14:59 minutes). The changed brewing time will be saved.

While the brewing time is counting down, you can continue to use the coffee machine as normal. An audible tone will sound and the   symbol will flash after the brewing time has elapsed.

Setting the TeaTimer

You can select from the following options:

Automatic : The TeaTimer starts automatically when tea dispensing has finished.

Manual : When tea dispensing has finished, you have the option of starting the TeaTimer .

The drinks menu is displayed.

 Touch the  sensor.

 Select Settings  | TeaTimer .

 Select the setting you want and confirm with OK .

Making tea

If you touch the   sensor, a menu with various types of tea will appear.

The drinks menu is displayed.

 Pour loose tea into a tea filter or similar or take a tea bag from the packet.

 Place the tea filter or the tea bag in the tea cup.

 Place the tea cup under the central spout.

 Touch  .

 Select the type of tea you want and confirm your choice with OK .

Hot water will be dispensed into the cup.

If you have selected the TeaTimer  |

  Automatic setting, the minute minder for the brewing time will start after dispensing the water for the tea.

Starting the TeaTimer manually

TeaTimer appears in the display as soon as the water for the tea has been dispensed.

 Touch OK .

The editor will open with a suggested time.

 Change the brewing time, if necessary, and confirm with OK .

An audible tone will sound and the

  symbol will flash after the brewing time has elapsed.

34

Making drinks

 Remove the tea filter or tea bag when the desired brewing time has elapsed.

Teapot

You can use the Tea pot function to dispense a larger quantity of water for making tea (max. 1 litre). The selected type of tea determines the preset temperature.

The drinks menu is displayed.

Useful tip: Before starting Tea pot , ensure the water container is sufficiently filled.

 Place a sufficiently large container under the central spout.

 Touch the  drink sensor control.

 Select Tea pot .

 Select the desired type of tea and the desired number of cups (3-8).

Cancelling preparation

 Touch the  sensor.

Preparing warm and hot water

You can select from the following options:

- Hot water (approx. 90 °C)

- Warm water (approx. 65 °C)

The drinks menu is displayed.

 Place a suitable cup or glass underneath the central spout.

 Touch the  sensor.

 Select warm or hot water.

 Confirm with  OK .

Dispensing will start.

35

Expert mode

With the Expert mode function you can change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink.

Switching Expert mode on and off

The drinks menu is displayed.

 Touch the  sensor.

 Select Settings   | Expert mode .

 Select the desired option.

 Confirm with  OK .

The setting is now saved.

Expert mode: Changing the portion size

The drinks menu is displayed.

The portion size can only be changed when the respective ingredient is being processed while the drink is being made.

If you select DoubleShot   or 2 portions   , Expert mode cannot be used to change the portion size.

 Select a drink.

Dispensing will start. You can adjust the portion size while it is being dispensed, e.g. individually change the amount of hot milk, milk froth and espresso for

Latte macchiato.

Dispensing

 Move the control (small triangle) in the navigation area to the desired position.

36

Grinder setting

The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema.

The grinder setting you select will be used for all coffee drinks.

There are various ways to tell whether the coffee grinder is set correctly.

The grinder setting is too coarse if the coffee or espresso is watery and tastes acidic. The crema is very pale.

Set a finer grinder setting.

The grinder setting is too fine if the coffee or espresso tastes too bitter and the crema is dark brown.

Set a coarser grinder setting.

Only adjust the grinder one setting at a time.

Start making a drink to grind beans again. Adjust the grinder setting one setting at a time again.

 Push the slide control a maximum of one setting to the front (for finer grinding) or to the back (for coarser grinding).

 Push the water container back into the machine.

 Close the appliance door.

 Make one cup of coffee.

Then you can adjust the grinder setting again.

Adjusting the grinder setting

The slide control for the grinder setting is located at the top left behind the water container.

 Open the appliance door.

 Remove the water container.

37

Parameters

Displaying and changing parameters

You can change the portion size for all drinks.

For coffee drinks, you can also set the amount of coffee, the brewing temperature and pre-brewing for each coffee drink individually.

 Touch the  sensor.

 Select a drink and confirm with OK .

The parameters that you can change for this drink will be displayed.

If you have selected a coffee drink, the current settings for Amount of coffee ,

Brew temperature and Pre-brewing will be displayed.

The Portion size option is displayed. If you select Portion size and confirm with OK , drink preparation will begin immediately.

 Select the required parameters.

 Change the setting as required and confirm with OK .

The setting is now saved.

Portion size

The flavour of the coffee produced depends not only on the type of coffee, but also on the amount of water used.

You can programme the amount of water for all drinks (except Coffee pot ) to suit the size of your cups and/or the type of coffee you are using, for example.

For coffee drinks that use milk, you can not only set the amount of espresso or coffee, but also the amount of milk or milk froth to be dispensed with these drinks.

A maximum portion size can be programmed for each type of drink. The coffee machine halts preparation of the coffee once this portion size has been reached. The maximum possible portion size is then saved by the appliance for this type of drink.

If the water container becomes empty during the preparation of a drink, the programming of the portion size will be cancelled. The portion size will not be saved.

Changing the portion size

 Place a cup or glass under the central spout.

 Select Portion size and confirm with

OK .

The desired drink will be made and Save will appear in the display.

 When the cup is filled up to the level you want, touch  OK .

If you want to change the portion size for coffee specialities made with milk, the ingredients which make up the drink will be saved one after the other while the drink is being made.

 When the quantity for each ingredient reaches the level you want, touch  OK .

The programmed combination of ingredients and portion sizes will now be dispensed every time that particular drink is selected.

38

Parameters

Useful tip: You can change the portion size of drinks shown in the display by touching and holding a sensor during preparation. Touch the desired drink sensor until preparation starts. Save appears in the display during dispensing.

Amount of coffee

The coffee machine can grind and brew

7.5–12.5 g of coffee beans per cup. The greater the quantity, the stronger the coffee.

The quantity of coffee is too low if the espresso or coffee lacks body.

Increase the amount of coffee so that more ground coffee is brewed.

The quantity of coffee is too high if the espresso or coffee tastes bitter.

Decrease the amount of coffee so that less ground coffee is brewed.

Brewing temperature

The brewing temperature must be adapted to the beans you are using and how they are roasted. It also varies depending on whether you are making espresso or coffee.

Some bean types are sensitive to high brewing temperatures, resulting in an impaired taste. If your coffee tastes bitter, the brewing temperature you have selected might be too high.

Espresso is usually brewed at higher temperatures.

You can also adjust the brewing temperature for tea drinks, warm water and hot water.

Pre-brewing ground coffee

When the pre-brewing function is switched on, the ground coffee is first moistened with a little hot water. The ground coffee swells a little. The remaining amount of water is then pressed through the moistened coffee grounds shortly after. If your coffee tastes too bland and you want to add some spice and richness, try the “Prebrewing” function. Depending on the type of coffee used, pre-brewing can intensify the taste.

You can set a short or long duration for pre-brewing or turn the “Pre-brewing” function off completely.

Useful tip: We particularly recommend using the “Pre-brewing” function to make coffee.

39

User profiles

In addition to the Miele drinks menu

(Miele profile), you can create individual profiles to cater for different tastes and preferences.

The portion quantities and parameters for all drinks can be adjusted in each profile.

The name of the current profile is shown in the top left of the display.

Creating a profile

 Touch the  sensor.

The User profiles menu opens.

 Select Create profile and confirm with

OK .

The editor will open in the display.

 Enter the profile name:

- To enter a character, highlight a character and confirm the selection with OK .

- To delete a character, touch the

  sensor.

- A name is saved by selecting the tick   and confirming with OK .

The profile is created.

Changing drinks in a profile

When you change the parameters of a drink within a profile, these settings only apply to the active profile. The settings for drinks in other profiles are not affected.

 Select the profile you want.

The name of the profile selected will be shown in the top left-hand corner of the display.

40

You can now change the drinks individually.

Preparing User profile drinks

 Touch the  sensor.

 Select the profile you want.

 Select the drink you want.

Drink preparation starts.

Editing profiles

When you have created at least one profile, you can rename, delete or change profiles in the User profiles menu.

 Select Edit and confirm with OK .

You can now edit the selected profile.

Setting change of profile

You can select from the following options:

Manual : The selected profile remains active until you select another profile.

After each use : The Miele profile is displayed after every drink.

When switched on : Every time the coffee machine is switched on, the

Miele profile is displayed, regardless of which profile had been selected before switching off.

 Select Change profile and confirm with

OK .

 Select the option you want and confirm this with OK .

Changing a name

This selection is only possible if a profile has been allocated in addition to the Miele standard profile.

 Select Change name and confirm with

OK .

 Change the name as required:

- To delete a character, touch the

  sensor.

- To enter new characters, highlight a character and confirm the selection with OK .

- The changed name is saved by selecting the tick   and confirming with OK .

Deleting a profile

This selection is only possible if a profile has been allocated in addition to the Miele standard profile.

 Select Delete profile and confirm with

OK .

 Select the profile you wish to delete.

 Select Yes and confirm with OK .

The profile is deleted.

User profiles

41

MobileStart

With MobileStart you can, for example, start making a drink via the Miele App.

You can only use MobileStart if

Miele@home is set up for your coffee machine.

 Danger of burning and scalding on the dispensing spouts.

If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.

Ensure that no one, especially children, can be harmed if the machine is operated without supervision.

The pipework is not pre-warmed when the machine is switched on, meaning that the cup under the central spout is not filled with rinse water.

Milk is not cooled in the milk flask. If you want to start making a drink with milk using the App, make sure that the milk is sufficiently cold (< 10 °C).

If the coffee machine is being operated manually, it cannot be operated via the App. Operation on the appliance takes precedence.

To start making drinks remotely,

MobileStart must be activated. Make sure that the coffee machine is ready to use, for example check that the water container is sufficiently filled. Place a sufficiently large, empty cup or glass under the central spout.

MobileStart will be deactivated after

24 hours.

If you are making a drink with

MobileStart, you will be notified of drink dispensing with acoustic and optical signals. These signals cannot be changed or switched off.

Switching MobileStart on and off

If you want to use MobileStart , the

Remote control option must be switched on.

The drinks menu is displayed.

 Touch the  sensor.

 Select MobileStart .

 Select the option you want and confirm this with OK .

If you have switched on MobileStart , you can now start making a drink via the

App. Follow the prompts for doing this.

42

You can use the Settings menu to customise the coffee machine to suit your individual requirements.

Displaying and changing

Settings

The drinks menu is displayed.

 Touch the   sensor.

 Select Settings  and touch OK .

 Select the option you want to display or change.

 Confirm with OK .

 Change the setting as required and confirm with OK .

Some settings which can be found in the Settings menu are described in their separate sections in the operating instructions.

Language

You can select a language and location variant for all display texts.

Useful tip: If you select the wrong language by mistake, you can find the

"Language" option again via the

  symbol.

Time of day

Display (time display)

Select how you want the time of day to appear in the display when the coffee machine is switched off:

On : The time is always visible in the display.

Off : The time is not displayed.

Settings

Night dimming : To save energy, the time is displayed from 5:00 to 23:00 only.

Clock format

- 24-hour display ( 24 h )

- 12-hour display ( 12 h )

Setting

Set the hours and then the minutes.

If the coffee machine has been connected to a Wi-Fi network and is signed into the Miele App, the time will be synchronised based on the location setting in the Miele App.

Date

Set the date.

Timer

The coffee machine has two timers with the Switch on at and Switch off at timer functions.

You can allocate individual timer functions to different days of the week.

Switch on at

The coffee machine switches on at a particular time, e.g. in the morning for breakfast.

The coffee machine will not switch on at the required time if you have activated the system lock.

The timer settings are deactivated.

If the coffee machine has switched itself on automatically three times at the specified time and no drinks have been dispensed, the machine will not switch itself on again automatically. This

43

Settings prevents the coffee machine from switching itself on unnecessarily, for example, whilst you are away on holiday.

The programmed times will, however, remain in memory and will be reactivated after manually switching the machine on again.

If you have switched on the time display for the switched off appliance ( Show |

On or Night dimming ) the  symbol and the desired switch-on time will appear in the display up to 23:59 hours ahead of time.

Switch off at

The coffee machine switches off at a particular time.

In the event of a longer absence, the programmed times will remain in memory and will be reactivated after manually switching the machine on again.

Switch off after

The coffee machine switches off after a particular length of time if no sensors have been touched.

Under the default settings the coffee machine switches off after 20 minutes.

You can change this preset to a time of between 20 minutes and 9 hours.

Volume

You can set the volume of buzzer and keypad tones using the segment bar.

The welcome melody that sounds when the On/Off   sensor is touched can be switched on or off.

Display brightness

You can set the display brightness using the segment bar.

Lighting

You can adjust the brightness of the lighting when the machine is switched on or off.

You can also set for the switched off appliance the length of time after which the lighting should switch off (between

15 minutes and 9 hours).

Info (display information)

You can display the number of drink portions or the number of possible portions before maintenance programmes are necessary.

Altitude

If the coffee machine is installed at high altitudes, the lower air pressure will cause the water to boil at a lower temperature. You can set the local altitude of the machine to ensure that the correct temperatures are achieved.

TeaTimer

You can use the TeaTimer to start a minute minder when making tea (see

“Making drinks - TeaTimer”).

Performance mode

You can select the most suitable performance mode for your type of use.

Eco mode is set as standard.

44

Settings

Eco mode

Eco mode is an energy saving mode.

The system heats up only once drink preparation has started.

Barista mode

This Performance mode is optimised for perfect coffee enjoyment. Coffee drinks can be prepared without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco mode.

Latte mode

This mode is optimised for preparing drinks containing milk. Milk-based drinks can be prepared much faster.

This mode consumes more energy than

Eco mode and Barista mode

Party mode

This Performance mode is designed for infrequent , intensive use of the coffee machine, e.g. for family parties.

After intensive use, clean the coffee machine, and particularly the milk pipework, thoroughly. If necessary, descale the machine and degrease the brew unit.

Please note the following information about Party mode:

- The pipework is rinsed much less frequently or not at all. The milk pipework is not rinsed until around

1 hour after the last drink with milk was dispensed.

- Any messages on the maintenance status, or maintenance prompts, are suppressed and delayed until the next time the machine is switched on.

- The Switch off at and Switch off after timer are deactivated. The coffee machine switches off 6 hours after the last sensor has been touched.

- Cup lighting on the central spout is switched on permanently at the maximum brightness level for as long as the coffee machine is switched on.

Water hardness

Programme the coffee machine to the water hardness level of your area so that it functions correctly and does not get damaged.

Contact your local water supplier to find out your local water hardness range if necessary.

If you are using bottled drinking water, e.g. mineral water, select settings according to the calcium content. The calcium content is given on the label of the bottle in mg/l Ca

2+

or ppm (mg

Ca

2+

/l).

Do not use carbonated water.

The water hardness is preset at the factory to 21° dH (3.8 mmol/l).

45

Settings

46

14

15

16

17

18

9

10

11

12

13

4

5

6

7

8

1

2

3

27

28

29

24

25

26

19

20

21

22

23

Water hardness Calcium content

°dH mmol/l mg/l Ca

2+

or ppm (mg Ca

2+

/l)

Setting

2.5

2.7

2.9

3.0

3.2

1.6

1.8

2.0

2.1

2.3

0.7

0.9

1.1

1.3

1.4

0.2

0.4

0.5

4.8

5.0

5.2

4.3

4.5

4.6

3.4

3.6

3.8

3.9

4.1

100

107

114

121

129

64

71

79

86

93

29

36

43

50

57

7

14

21

171

179

186

193

200

207

136

143

150

157

164

14

15

16

17

18

9

10

11

12

13

4

5

6

7

8

1

2

3

27

28

29

24

25

26

19

20

21

22

23

Water hardness Calcium content

°dH mmol/l mg/l Ca

2+

or ppm (mg Ca

2+

/l)

Setting

30

31

32

33

34

35

36

37-45

6.4

6.6-8.0

46-60 8.2-10.7

61-70 10.9-12.5

5.4

5.5

5.7

5.9

6.1

6.3

214

221

229

236

243

250

257

258–321

322–429

430-500

30

31

32

33

34

35

36

37-45

46-60

61-70

Useful tip: If your water hardness is

>21 °dH (3.8 mmol/l), we recommend instead to use bottled drinking water

(< 150 mg/l Ca

2+

). This will mean your coffee machine will need to be descaled less often and there will be less impact on the environment because less descaling agent will be used.

System lock 

You can lock the coffee machine to prevent it being used without your knowledge, for example by children.

When the system lock is activated, the settings for the Switch off after timer are deactivated. The coffee system will not switch on at the time set.

Overriding the system lock  

 Touch  OK for 6 seconds.

The system lock is activated the next time the machine is switched off.

Settings

Miele@home

The following points may appear under

Miele@home:

Set up : This option only appears if the coffee machine has not previously been connected to a Wi-Fi network or if the network configuration has been reset.

Deactivate */ Activate *: The settings for the Wi-Fi network are retained, but the network is switched on or off.

Connection status *: Information about the Wi-Fi connection is displayed. The symbols indicate the strength of the connection.

Set up again *: The settings for the current Wi-Fi network will be reset.

The Wi-Fi connection will be set up again.

Reset *: The settings for the current

Wi-Fi network will be reset.

The network configuration should be reset whenever the coffee machine is being disposed of or sold, or if a used coffee machine is being put into operation. This is the only way to ensure that all personal data has been removed and, in the case of the latter, the previous owner will no longer be able to access the coffee machine.

* This option appears if Miele@home has been set up and the coffee machine has been connected to your

Wi-fi network.

Remote control

Remote control appears when the coffee machine is connected to a Wi-Fi network.

You can change the coffee machine settings, for example, in the Miele App when remote control is switched on. To start making a drink via the App,

MobileStart must be additionally activated.

Remote control is switched on as standard.

RemoteUpdate

The RemoteUpdate menu option is only displayed and can only be selected if the requirements for using

Miele@home have been met.

The RemoteUpdate function is used for updating the software in your coffee machine. If an update is available for your coffee machine, this will be downloaded by the machine automatically. Updates will not be installed automatically. They must be initiated manually.

If you do not install an update, you can continue to use your coffee machine in the usual way. However, Miele recommends installing updates.

Switching on/Switching off

RemoteUpdate is switched on as standard. Available updates will be downloaded automatically and will only be installed if you initiate it.

Switch off RemoteUpdate if you do not wish any updates to be downloaded.

47

Settings

Running a RemoteUpdate

Information about the content and scope of an update is provided in the

Miele App.

A message will appear in your coffee machine display if a software update is available.

You can install the update immediately or postpone this until later. When the coffee machine is switched on again, you will be reminded about the update.

Deactivate RemoteUpdate if you do not want to install the update.

The update may take several minutes.

Please note the following information about the RemoteUpdate function:

- You will only receive a message when an update is available.

- Once an update has been installed, it cannot be undone.

- Do not switch off the coffee machine while an update is being downloaded or installed. Otherwise, the update will be aborted and will not be installed.

- Some software updates can only be carried out by a Miele service technician.

Software version

The “Software version” menu option is intended for Miele service technicians.

You do not require this information for your own use.

Showroom programme (Demo mode)

Do not activate this setting for domestic use.

The Showroom programme | Demo mode function enables the coffee machine to be demonstrated in stores or showrooms. In this mode, the machine lights up but drinks cannot be prepared and no maintenance programmes can be carried out.

You can activate Demo mode without commissioning the appliance. Switch the coffee machine on and off again.

Then immediately touch and hold the

  sensor for 5 seconds. Demo mode is active.

Factory default settings

You can reset the settings back to the ones which were set when the coffee machine was delivered - the factory default settings.

The following will not be reset:

- The number of drinks and the appliance status (No. of uses until appliance needs descaling, ...

brew unit needs degreasing)

- Language

- Time and date

- Profiles and respective drinks

- Miele@home

48

Cleaning and care

 Risk to health due to inadequate cleaning.

Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health.

Carefully clean the coffee machine regularly.

Cleaning intervals - Quick guide

Recommended frequency

Every day

(at the end of the day)

Once a week

(more often if heavily soiled)

Once a month

As required / When prompted by display

What do I have to clean/maintain?

Milk flask and lid

Milk valve

Water container

Drip tray cover

Drip tray and waste container

Central spout

Cup rim sensor

Interior

Brew unit

Drip catcher

Appliance front

Remove and clean the milk valve

Bean container

Milk pipework (using the Miele Cleaning agent for milk pipework)

Degrease the brew unit (using the cleaning tablets)

Descale the appliance

49

Cleaning and care

Cleaning by hand or in the dishwasher

The brew unit is not dishwashersafe.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

The following must be cleaned by hand only :

- Central spout stainless steel cover

- Brew unit

- Coffee bean container and lid

 Risk of damage as a result of excessively high dishwasher temperatures.

Components may be rendered unusuable (e.g. deformed) if washed in a dishwasher at a temperature of more than 55 °C.

For dishwasher-safe parts, the maximum temperature of the dishwashing programme selected must not exceed 55 °C.

Contact with natural dyes such as those found in carrots, tomatoes and ketchup may discolour the plastic parts in the dishwasher. This discolouration does not affect the stability of the parts.

The following components are dishwasher safe :

- Drip tray with lid and waste container

- Drip tray cover

- Central spout (without stainless steel cover)

- Milk flask with lid

- Cup sensor

- Drip catcher

- Maintenance container

- Water container

50

Cleaning and care

 Danger of burning and scalding on hot components or by hot liquids.

Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Always allow the coffee machine to cool down before cleaning it.

Please be aware that water in the drip tray can also be very hot.

 Risk of damage due to moisture ingress.

The steam from a steam cleaner could reach electrical components and cause a short circuit.

Do not use a steam cleaner to clean the coffee machine.

It is important to clean the machine regularly, as the used coffee grounds will soon go mouldy. Milk residues can go off and can block the milk pipework.

Unsuitable cleaning agents

Contact with unsuitable cleaning agents can alter or discolour all surfaces. All surfaces of this appliance are susceptible to scratching. Scratches on glass surfaces could cause a breakage in certain circumstances.

Remove any residual cleaning agent immediately. To protect the machine and surrounding surfaces from damage, make sure you remove any spillages or splashes of descaling agent immediately.

To avoid damaging the surfaces of your appliance, do not use:

- cleaning agents containing soda, alkalines, ammonia, acids or chlorides

- solvent-based cleaning agents

- cleaning agents containing descaling agents (unsuitable for cleaning the appliance front)

- stainless steel cleaning agents

- dishwasher cleaners (unsuitable for cleaning the appliance front)

- glass cleaning agents

- cleaning agents for ceramic cooktops

- oven cleaner

- abrasive cleaning agents, e.g.

powder cleaners and cream cleaners

- hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents

- dirt erasers

51

Cleaning and care

- sharp metal scrapers

- steel wool or stainless steel wire scourers

Cleaning the drip tray and waste container

 Danger of burning and scalding on hot components or by hot liquids.

Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding.

If the pipework has just been rinsed, wait a while before removing the drip tray as the water used for rinsing will still run out of the coffee spouts.

Please be aware that water in the drip tray can also be very hot.

Do not touch hot components.

Clean the drip tray and waste container every day to avoid unpleasant smells and mildew.

A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied. Empty the drip tray and the waste container. The lid of the drip tray does not need to be removed for emptying.

Useful tip: If the drip tray is very dirty, clean it with a brush prior to placing it in the dishwasher.

 Open the appliance door.

52

Cleaning and care

 Clean the drip tray, the lid and the waste container in the dishwasher, or by hand using warm water and a mild solution of washing-up liquid.

 Dry all parts afterwards.

 Clean the interior of the coffee machine underneath the drip tray.

Cleaning the contacts

 Remove the drip tray with the waste container from the appliance.

 Remove the waste container from the drip tray and empty the waste container.

Apart from coffee grounds, there may also be some water in the waste container.

Dismantling the drip tray

 Clean the contacts (metal discs) and the space between them carefully, e.g. with a soft brush. Dry all parts thoroughly.

The contacts will not be able to detect that the drip tray is full if they are damp or dirty.

Check the contacts and the area around them once a week.

The orange latches are not removable.

 Remove the lid from the drip tray: push the orange latches on either side outwards and undo the lid. Take the lid off.

53

Cleaning and care

Assembling the drip tray Cleaning the drip tray cover

 Refit the lid of the drip tray: push the lid in under the lip next to the contacts and press down on the lid until the latches click into place.

 Place the waste container on top of the lid.

 Push the drip tray, together with the waste container, back into the coffee machine. Close the appliance door.

 Remove the drip tray cover: to do this, push down on the rear edge of the cover so that the front lifts up and can be easily removed.

 The drip tray cover can be cleaned in the dishwasher, or by hand using warm water, a little washing up liquid, and a soft cloth.

 Dry the drip tray cover.

 Refit the drip tray cover.

Cleaning the water container

Clean the water container daily by hand with warm water and a little washing-up liquid. You can clean the water container in the dishwasher once a week.

 Open the appliance door.

 Remove the water container.

 Clean the water container and rinse it with clean water to remove any dishwashing liquid residues. Dry the outside of the water container.

54

Cleaning and care

 Clean and dry the surface that the water container sits on.

 Fill the water container with cold, fresh tap water.

 Push the water container all the way into the coffee machine. Close the appliance door.

Cleaning the central spout

Clean the central spout stainless steel cover by hand only using warm water and a little washing-up liquid.

With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher at least once a week . This will remove coffee deposits and milk residues effectively.

 Open the appliance door.

 Carefully pull the stainless steel cover off and then clean it.

 Release the milk pipework from the dispensing unit: to do this, pull the lug   to the left.

The connection piece in the milk pipework should not be removed.

Clean the connection piece, if necessary, with the cleaning brush.

55

Cleaning and care

 Hold the dispensing unit on either side and pull down to remove it.

 Dismantle the dispensing unit into three pieces: disconnect the Yshaped piece, the dispensing spouts and the holder from one another.

 Clean all parts thoroughly.

 Clean the area surrounding the central spout with a damp cloth.

Reassembling the central spout

The dispensing unit is easier to reassemble if the individual parts are dampened with water beforehand.

Make sure that all parts are tightly connected to one another.

 Reassemble the dispensing unit.

Press firmly to connect the dispensing spouts correctly to the holder.

 Insert the dispensing unit in the coffee machine and connect the milk pipework.

56

Cleaning and care

 Refit the stainless steel cover.

 Close the appliance door.

Fit cover to central spout appears in the display.

 Confirm the message with OK .

Cleaning the cup rim sensor

The cup rim sensor is located underneath the central spout.

Clean the cup rim sensor at least once a week and more often if heavily soiled.

Cleaning the milk flask with lid

The milk flask should be taken apart and cleaned every day after use.

Clean the lid and the glass by hand using warm water and a little washingup liquid applied with a soft cloth.

 Remove and empty the milk flask.

 Push the two locking catches together (see arrows).

The cup rim sensor will be released.

 Clean the cup rim sensor in the dishwasher, or by hand using warm water and a little washing-up liquid applied with a soft cloth.

 Push the cup rim sensor from underneath into the holder on the central spout to refit it.

 Rinse the milk pipework in the lid under running water before placing the lid of the milk flask in the dishwasher.

 If water does not run out of the connection piece   , clean it with the cleaning brush.

 Clean the glass flask.

 Dry all parts and especially the threads on the lid and on the glass with a clean cloth. Reassemble the milk flask.

57

Cleaning and care

 Clean the milk flask holder on the coffee machine with a damp cloth.

Cleaning the milk valve (daily)

The seal of the milk valve can be damaged by sharp-edged objects or similar.

Do not use any sharp-edged objects

(such as knives) to clean the milk valve.

 Open the appliance door.

 Clean the milk valve with a damp sponge or microfibre cloth.

 Close the appliance door.

Removing and cleaning the milk valve (once a month)

When preparing milk, if hot milk is dispensed instead of milk froth, or the milk sputters when dispensed, the milk valve may be blocked. Clean the milk valve more often if necessary.

Clean the milk valve cover by hand only.

 Open the appliance door.

 Remove the bean container on the left and the maintenance container.

 Remove the central spout’s stainless steel cover.

The milk valve is located under the bean container on the left-hand side.

Milk residues can accumulate on the stainless steel stem and dry on. These crusty deposits are difficult remove.

Therefore, it is important to carry out regular cleaning after preparing milk.

58

 Remove the milk valve cover: press on the recessed grip to unlock the cover.

On the top right-hand side of the cover there is a pin which enables you to swing open the cover.

Cleaning and care

3 2

1

 Detach the milk pipework from the dispensing unit on the central spout   and from the milk valve silicone seal (  and   ).

 Remove the milk pipework   that connects the milk valve to the central spout.

 Disconnect the angular moulded hose and the curved hose from one another. Rinse the hoses thoroughly under running water.

Do not remove the connection pieces from the hoses.

 Dismantle the holder and the silicone seal.

 Press the catches on the left and right of the milk valve holder and pull the holder forwards to remove it.

 Lift out the stainless steel stem.

 Clean the individual parts of the milk valve in the dishwasher.

Useful tip: If there are any dry milk residues on the front, soak the stainless steel stem in warm water and a little washing-up liquid.

Fitting the milk valve

 Slide in the stainless steel stem from above.

 Fit the silicone seal in the milk valve holder.

59

Cleaning and care

 Fit the holder with the silicone seal until it clicks into position.

Useful tip: If necessary, turn the milk pipework on the right connection piece towards the back.

 Connect the angular moulded hose to the longer milk pipework. Firstly fit the moulded hose at the top on the central spout. The black connection piece should point towards the rear.

 Then, connect the bottom end of the moulded hose to the dispensing unit.

 Insert the milk pipework into the milk valve on the left and right-hand sides.

Push the connecting pieces into the silicone seal as far as they will go.

 Check whether the milk pipework sits comfortably against the housing and the cover is easy to refit.

 Fit the milk valve cover: to do this, place the pin in the top right corner and swing the cover towards the rear until it closes flush.

 Refit the bean container on the left and the maintenance container in the coffee machine. Refit the central spout stainless steel cover.

 Close the appliance door.

60

Cleaning and care

Cleaning the bean containers

 Damage due to incorrect use and cleaning.

If the bean containers are immersed in water, it may result in malfunctions. Parts may break off during dismantling or mechanical components may not function correctly after reassembly.

Do not dismantle the bean containers.

Do not immerse the bean containers in liquids, e.g. washing-up liquid solution.

Coffee beans contain oils which can deposit on the walls of the bean containers and hinder the flow of the beans. Therefore, clean the bean containers regularly with a soft cloth.

If required, you can clean the lids of the bean containers by hand with warm water and a little washing-up liquid. Dry the lids thoroughly before refitting them on the bean containers.

 Open the appliance door.

 Remove the bean containers on the left and right from the coffee machine.

 Clean the bean container chutes in the machine.

Useful tip: Use a vacuum cleaner to remove any coffee grounds from the interior of the machine.

 Remove the lids and empty the bean containers.

Do not remove the components which assist the flow of beans (see arrow).

 Clean the bean containers and their lids by hand with a slightly damp cloth. Dry all parts thoroughly before filling the bean containers with coffee beans again.

 Refit the lids and push the bean containers back into the coffee machine.

 Close the appliance door.

61

Cleaning and care

Removing the brew unit and cleaning by hand

The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

Remove and clean the brew unit once a week . Also clean the area underneath the brew unit once a week.

 Open the appliance door.

 Remove the water container.

 Pull the brew unit to the side   first and then pull out to the front   . Tilt the brew unit forwards   .

If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See

"Problem solving guide").

When you have removed the brew unit, do not change the position of the handle on the brew unit.

Otherwise the brew unit cannot be refitted.

 Clean the brew unit by hand under warm running water without using washing-up liquid or any other cleaning agent.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle to the front   .

62

Cleaning and care

 Wipe any remaining coffee residues from the filters. One filter is located in the funnel. The other filter is located to the left of the funnel.

 Dry the funnel to prevent ground coffee sticking to it the next time a coffee is prepared.

Cleaning the interior of the machine

 Use your vacuum cleaner to remove dry coffee grounds.

 Clean the niche of the brew unit with a damp, clean cloth. Clean the areas marked in white in the illustration, e.g.

around the drive shaft, especially well.

Refitting the brew unit

 Proceed in the reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forwards a little when doing this.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle to the rear   .

Useful tip: If the handle of the brew unit cannot be turned, press firmly on the side of the brew unit.

 Push the water container into the coffee machine.

Coffee powder falls onto the drip tray when the brew unit is removed and refitted.

 Remove the drip tray and clean the lid.

 Push the drip tray back into the coffee machine and close the door.

Cleaning the interior, the inside of the appliance door and the drip catcher

Clean the interior and the appliance front during normal cleaning. For example, clean the area underneath the water container when the water container has been removed.

63

Cleaning and care

At the bottom of the inside of the appliance door there is a drip catcher.

Remove and empty the drip catcher regularly. The drip catcher is dishwasher-safe.

 Open the appliance door.

 Remove and clean the drip catcher.

 Remove all parts from the interior of the machine:

- Water container

- Drip tray

- Maintenance container

- Brew unit

- Bean container

Useful tip: Use your vacuum cleaner to remove dry ground coffee residues.

 Clean the interior and the inside of the appliance door by hand with a slightly damp, clean sponge or microfibre cloth. Then dry the interior and the appliance door with a soft cloth.

 Refit all parts, including the drip catcher.

 Close the appliance door.

Cleaning the appliance front

If soiling is not removed promptly, it could cause the surface to alter or discolour.

Remove any soiling from the front of the appliance straight away.

Make sure that water cannot get behind the display.

Clean the appliance front after descaling. Wipe up any spillages of descaling agent as soon as possible.

Useful tip: Open the appliance door before cleaning the control panel. This will avoid operating errors.

 Clean the appliance front with a slightly damp, clean sponge or a microfibre cloth. After cleaning, wipe the surfaces dry using a soft cloth.

Useful tip: You can also clean the appliance front with the Miele all purpose microfibre cloth.

64

Cleaning and care

Maintenance programmes

The coffee machine has the following maintenance programmes:

- Rinse the appliance

- Rinse the milk pipework

- Cleaning the milk pipework

- Degrease the brew unit

- Descale the appliance

Carry out the relevant maintenance programme when the prompt to do so appears in the display. You can also start maintenance programmes at any time so that the coffee machine does not prompt mandatory cleaning at an inconvenient time.

Useful tip: To reduce the frequency of the drip tray needing to be emptied, you can place the maintenance container under the central spout.

Opening the Maintenance menu

 Touch the  sensor.

You can now select a maintenance programme.

Rinse appliance

If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off.

You can also start Rinse appliance manually.

Cleaning the milk pipework

The milk pipework must be cleaned at least once a week.

The Clean milk pipework maintenance programme lasts for approx.

15 minutes.

 Touch the   sensor.

 Select Clean milk pipework and touch

OK .

The process begins and various messages appear in the display.

 Follow the instructions in the display.

When Fill water container with lukewarm water and cleaning agent up to the  symbol and insert. Close the door.

appears in the display, proceed as follows.

Making a cleaning solution

For optimal cleaning results, we recommend the Miele Cleaning agent for milk pipework.

The Cleaning agent for milk pipework has been specially developed for use with Miele coffee machines and prevents subsequent damage.

It is available to order from the Miele online shop or directly from Miele (see the end of this booklet for contact details).

 Add 2 sachets of the Cleaning agent for milk pipework to the water container.

Rinsing the milk pipework

If you have prepared a drink using milk, the coffee machine will automatically rinse the milk pipework after a few minutes. You can also start Rinse milk pipework manually.

65

Cleaning and care

 Fill the water container to the

  marker with lukewarm water and stir the solution.

Follow the instructions for the mixing ratio of the cleaning agent. Fill the water container with the correct amount of water. Cleaning will otherwise not be completed.

 Insert the water container and close the appliance door.

 Follow the instructions in the display.

 If prompted in the display, carefully rinse out the water container with clean water. Ensure that no cleaning agent is left in the water container. Fill the water container with tap water.

The cleaning process is finished when the drinks menu appears in the display.

We recommend using Miele Cleaning

Tablets to clean the brew unit. These have been specially developed for use with Miele coffee machines and prevent subsequent damage.

Miele Cleaning Tablets can be ordered via the Miele webshop or directly from

Miele (see the end of this booklet for contact details).

The maintenance programme for degreasing the brew unit lasts for approx. 10 minutes.

You need 1 cleaning tablet for the maintenance programme.

After 200 portions have been dispensed, a message prompting you to degrease the brew unit will appear in the display.

 Confirm the message with OK .

This message will appear repeatedly until the brew unit is degreased.

Degreasing the brew unit

 Touch the  sensor.

 Select Degrease the brew unit and touch OK .

The maintenance programme will start.

 Follow the instructions in the display.

Remove the water container and the brew unit. Clean the interior of the machine. Rinse the brew unit by hand and refit it with a cleaning tablet in it.

appears in the display.

Degreasing the brew unit and cleaning the interior

Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine.

66

Cleaning and care

Cleaning the brew unit and the interior

The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

To ensure good tasting coffee and to prevent the formation of microbes in the machine, remove and clean the brew unit under running water once a week.

 Open the appliance door.

 Remove the water container.

 Pull the brew unit to the side   first and then pull out to the front   . Tilt the brew unit forwards   .

If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See

"Problem solving guide").

When you have removed the brew unit, do not change the position of the handle on the brew unit.

Otherwise the brew unit cannot be refitted.

 Clean the brew unit by hand under warm running water without using washing-up liquid or any other cleaning agent.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle to the front   .

67

Cleaning and care

 Push the brew unit with cleaning tablet back into the coffee machine.

 Wipe any remaining coffee residues from the filters. One filter is located in the funnel and the other to the left of the funnel.

Coffee powder falls onto the drip tray when the brew unit is removed.

 Remove the drip tray and clean the lid.

 Clean the interior of the coffee machine (see also “Cleaning and care

– Removing the brew unit and cleaning it by hand”). Use your vacuum cleaner to remove dry ground coffee residues.

Adding a cleaning tablet to the brew unit

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle to the rear   .

 Push the water container and the drip tray, together with the waste container, back into the coffee machine.

 Close the appliance door.

 Follow the further instructions given in the display.

The cleaning process is finished when the drinks menu appears in the display.

Descaling the appliance

Risk of damage from spilt descaling solution.

Sensitive surfaces and/or natural floors can suffer damage.

Wipe up any spillages of descaling agent immediately.

Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will

 Drop a cleaning tablet into the top of the brew unit (arrow).

68

Cleaning and care depend on the water hardness level in your area. Limescale must be removed regularly.

The appliance will guide you through the descaling process. Various messages will appear in the display, e.g. you will be prompted to empty the drip tray or fill the water container.

The descaling process is essential and takes approx. 35 minutes.

The coffee machine prompts you when it needs to be descaled. The remaining number of drinks that can be made before descaling will appear in the display after each drink.

 Confirm the message with OK .

When the number of remaining portions reaches 0, the appliance will lock out.

You can switch the coffee machine off if you do not want to carry out the descaling programme at this point.

However, you cannot make any drinks until the machine has been descaled.

Descaling after prompt appears in the display

Descale appliance appears in the display.

 Confirm the message with OK .

The process will start.

 Follow the instructions in the display.

When Place 2 descaling tablets in the water container and fill it with lukewarm water up to the  symbol and insert it. Close the door.

appears in the display, proceed as follows.

Preparing the descaling solution

For optimum descaling results, we recommend using the Miele descaling tablets provided.

The descaling tablets have been specially developed for Miele coffee machines.

Other descaling agents, which contain other acids besides citric acid and/or other undesirable substances, such as chlorides, may cause damage to the appliance.

Moreover, the descaling result required cannot be guaranteed if the descaling solution was not of the appropriate concentration.

Miele descaling tablets are available to order via the Miele webshop or directly from Miele (see the end of this booklet for contact details).

You will need 2 descaling tablets for the descaling process.

 Fill the water container to the marker   with lukewarm water.

 Add 2  Miele descaling tablets to the water container.

69

Cleaning and care

Follow the instructions for the mixing ratio carefully. Fill the water container with the correct amount of water.

Descaling will otherwise not be completed.

Carrying out descaling

 Push the water container back into the machine.

 Follow the further instructions given in the display.

When Rinse and insert the water container.

Close the door appears in the display:

 Remove the water container and rinse it thoroughly with clean water.

Ensure that no descaling solution residue remains in the water container. Fill the water container with tap water.

The descaling process has finished when the drinks menu appears in the display.

70

Problem solving guide

With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.

Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.

Messages in the display

Error messages must be confirmed with  OK . Otherwise the message may reappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem.

If the fault message appears again in the display, contact Miele.

Problem

F1, F2,

F80, F82,

F353, F354

F74, F77

F225, F226

F235, F353, F354

Possible cause and remedy

There is an internal fault.

 Switch the coffee machine off. Wait for approximately one hour before switching the machine back on again.

There is an internal fault.

 Switch the coffee machine off. Wait for approximately 2 minutes before switching the machine back on again.

71

Problem solving guide

Problem

F73 or

Check the brew unit

Possible cause and remedy

The brew unit cannot be positioned correctly or it is dirty. Coffee powder cannot be pressed.

 Check whether you can remove the brew unit.

 When you are able to remove the brew unit, rinse it under running water.

A maintenance programme is cancelled early and Push the water container in until it engages appears in the display.

 Push the coffee ejector of the brew unit into the correct position (see diagram).

 Do not insert the brew unit. Insert the water container and close the appliance door. Switch the coffee machine on.

This will initialise the brew unit motor and put it back into the start position.

 When Insert the brew unit appears in the display, open the appliance door and put the brew unit back in the machine. Close the appliance door.

 If you are unable to remove the brew unit, switch off the coffee machine. Wait for approximately 2 minutes before switching the machine back on again.

The water container was not correctly filled and refitted.

 Check that you have filled to the correct marker.

The symbols on the water container indicate the required water level for the

Descale appliance :   and Clean milk pipework :   maintenance programmes.

 Fill the water container to the marker and start the process again.

72

Problem solving guide

Problem

F233

F 307 or Remove the milk valve and clean it

Possible cause and remedy

The cup rim sensor is not inserted or is incorrectly inserted.

If the central spout is moving upwards and the cup rim sensor is bumped, e.g. with a cup, the cup rim sensor loses its reference position.

 Confirm the message with OK .

 Refit the cup rim sensor.

Cup detection is deactivated until the next time the coffee machine is switched on and the central spout remains in the highest position. Cup detection is initialised again the next time the machine is switched on.

The milk valve is faulty.

 Remove and clean the milk valve (see “Cleaning and care – Removing and cleaning the milk valve”).

73

Problem solving guide

Unusual performance of the coffee machine

Problem

The display remains dark when the coffee system is switched on with the On/

Off    sensor.

The lighting remains off after the coffee machine is switched on.

The coffee machine does not react to operating the display.

The coffee machine switches off suddenly.

The sensors do not respond to touch.

The appliance cannot be operated.

Possible cause and remedy

The On/Off    sensor was not touched for long enough.

 Touch and hold the On/Off   sensor for at least

3 seconds.

The plug is not properly inserted into the socket.

 Insert the plug into the socket correctly.

The mains fuse has tripped because the coffee machine, mains voltage or another appliance is defective.

 Switch off at the wall socket and remove the plug.

 Contact a qualified electrician or Miele.

The lighting has been switched off.

 Switch the lighting on (see “Settings - Lighting”).

The lighting is faulty.

 Call Miele.

There is a fault.

 Touch and hold the On/Off   sensor until the display switches off and the appliance restarts.

The factory set switch-off time (20 minutes) or the switch-off time you have programmed has been reached.

 If required, you can select a new switch-off time

(see "Settings - Timer").

The plug is not properly inserted into the socket or the socket is not switched on.

 Insert the plug into the socket correctly and switch on.

There is an internal fault.

 Disconnect the electricity supply by switching off at the wall socket and withdrawing the plug, or switching off the mains circuit breaker.

74

Problem solving guide

Problem

A fan can be heard even though no drinks are being prepared and the coffee machine is switched off.

The brew unit cannot be removed.

Possible cause and remedy

This is not a fault.

Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified.

The brew unit is not in the correct position.

 If necessary, move the handle on the brew unit back to the start position. Close the appliance door.

 Switch the coffee machine off.

 Wait approx. one minute before switching on the coffee machine.

This will initialise the brew unit motor and put it back into the start position.

 If necessary, repeat these steps.

Drink preparation is cancelled prematurely even though a cup or glass is located under the central spout.

The coffee machine does not switch itself on, although the Switch on at setting has been activated for the timer.

This is not a fault.

If the opening of the cup or glass is so wide, e.g. as with a large mug, that the cup rim sensor cannot detect the rim, the drink is cancelled. Use a different cup or glass, or position it in such a way that its rim can be detected.

The system lock has been activated.

 Deactivate the system lock.

The current day of the week has not been selected.

 Check the timer settings and change these if necessary.

The machine was not used after being switched on automatically three times in succession (holiday mode).

 Switch the machine on and dispense a drink.

You are preparing hot water or tea and instead of water, steam is dispensed.

The altitude is possibly set incorrectly.

 Change the altitude setting ( Settings       Altitude ).

 You can also change the temperature settings if necessary ( Parameters ).

The display is hard to see or not able to be read.

The display brightness is set too low.

 Change this setting.

75

Problem solving guide

Problem

The display lights up but the coffee machine does not heat up and no drinks are made.

Possible cause and remedy

The Demo mode of the coffee machine for Miele

Experience Centres and Chartered Agents has been activated.

 Deactivate Demo mode (see “Settings”).

76

Problem solving guide

Unsatisfactory results

Problem

The coffee is not hot enough.

The coffee grinder makes a louder noise than usual.

The coffee flows too quickly into the cup.

The coffee drink is dispensed too slowly into the cup.

There is no crema on the coffee or espresso.

Possible cause and remedy

The cup has not been pre-heated.

The smaller the cup and the thicker its walls, the more important it is to pre-heat it.

 Pre-heat the cup, for example with hot water.

The brewing temperature has been set too low.

 Set a higher brewing temperature.

The filters in the brew unit are blocked.

 Remove the brew unit and clean it by hand.

 Degrease the brew unit.

The coffee bean container has become empty during the grinding process.

 Fill the coffee bean container with fresh beans.

There may be foreign objects such as plastic or stones in amongst the coffee beans.

 Switch the coffee machine off immediately. Call

Miele.

The coffee is too coarsely ground.

 Set the grinder to a finer setting.

The brew unit is blocked.

 Degrease the brew unit (see "Cleaning and care -

Degreasing the brew unit and cleaning the interior").

The coffee beans are no longer fresh. If roasted coffee beans are stored open for too long, the carbon dioxide gradually escapes from the coffee beans. The crema is therefore no longer formed during dispensing.

Of course, you can still use the coffee beans.

77

Problem solving guide

Problem

The coffee tastes weak.

The coffee grounds in the waste container are sludgy and grainy.

Coffee is not being dispensed from both spouts evenly. Milk may be sputtering when being heated up.

The consistency of the milk froth is unsatisfactory.

Possible cause and remedy

Insufficient coffee beans are getting into the grinder and less coffee is being brewed.

Have you used a dark roast?

This type of coffee bean is often oily. These oils can cling to the inside of the coffee bean containers and hinder the flow of beans.

Are you using a type of coffee with very large beans or different sized beans?

The beans are possibly getting wedged or jammed and forming “bean bridges”.

 Clean the coffee bean containers more often if you are using darker, more oily coffee beans.

 Pull the bean containers out a little and shake them if you are using coffee with very large beans or different sized beans.

 Trying using a different type of coffee.

Coffee deposits in the central spout are obstructing dispensing.

 Dismantle the central spout and clean the parts except for the stainless steel cover - in the dishwasher.

This cleaning process should be carried out once a week .

The milk temperature is too high. Good milk froth can only be achieved with cold milk (below 10 °C).

 Check the temperature of the milk in the milk flask.

The milk pipework is blocked and/or the milk valve is dirty.

 Remove and clean the milk valve.

78

After sales service and warranty

Contact in case of fault

In the event of any faults which you cannot remedy yourself, please contact

Miele.

You can book a Miele customer service call-out online at www.miele.com.au/service or www.miele.co.nz/service.

Contact information for Miele can be found at the end of this booklet.

Please quote the model and serial number of your appliance when contacting Miele. This information can be found on the data plate.

Warranty

The manufacturer's warranty for this appliance is 2 years.

For further information, please refer to your warranty booklet.

79

Accessories

These products and other useful accessories can be ordered via the

Miele webshop or directly from Miele

(see back cover for contact details).

Original Miele all purpose microfibre cloth

For removing finger marks and light soiling

Cleaning agent for milk pipework

For cleaning the milk system

Cleaning tablets

For degreasing the brew unit

Descaling tablets

For descaling the water pipework

80

*INSTALLATION*

Electrical connection

Before connecting the appliance, make sure that the connection data on the data plate (voltage and frequency) matches the mains electricity supply.

This data must correspond in order to avoid the risk of damage to the appliance. If in any doubt, consult a qualified electrician.

The necessary connection information is given on the data plate inside your appliance.

The fuse rating must be at least 10 A.

The socket must be easily accessible. If the socket is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole contact gap of at least 3 mm. These include isolator switches, circuit breakers and relays.

Do not connect the machine solely to a stand-alone inverter . Inverters are used for autonomous power supply, e.g. a solar power system. When switched on, peak loads in the system can cause the safety switch-off mechanism to be triggered. This may damage the electronic unit.

The machine must not be used with socalled energy saving plugs . These reduce the amount of energy supplied to the machine, causing it to overheat.

Installation

81

*INSTALLATION*

Installation

Installation dimensions

Installation in a tall unit

A minimum installation height of 850 mm must be maintained.

All dimensions are given in mm.

Combination with other Miele built-in appliances is possible. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. When built in above a warming drawer, a closed shelf is not needed.

82

*INSTALLATION*

Installation and connections

All dimensions are given in mm.

Installation a Mains connection cable b Do not place electrical connection in this area

83

*INSTALLATION*

Installation

Building in the coffee machine

 Danger of injury due to incorrect installation.

Personal injury can result from an incorrectly installed, and therefore unsecured, appliance.

The coffee machine can only be operated once it has been built in.

 Risk of damage to property due to incorrect operation.

If the ambient temperature range is not complied with, the coffee machine may not function correctly.

The coffee machine may only be operated in an ambient temperature range between +16 °C and +38 °C.

be opened wide enough to remove the bean container on the left (minimum door opening angle of 120°).

A TX 20 screwdriver is required for installation.

Useful tip: We recommend providing a place to sit the coffee machine which is the same height as the building-in niche. This will make it easier to connect the machine to the electricity supply.

Connecting to the mains electricity supply

Observe the instructions in

“Electrical connection”.

A minimum installation height of

850 mm must be maintained.

Ensure that a door opening angle of

120° is present so that the bean container on the left can be removed.

Check whether there is a gap of at least

299 mm between the wall or similar and the coffee machine so that the door can

 Connect the coffee machine to the mains electricity supply.

Pushing in and levelling the coffee machine

Ensure the mains connection cable does not get jammed or damaged when pushing the appliance into the niche.

 Push the coffee machine all the way into the building-in niche.

 Check the height of the coffee machine to make sure that it is sitting centrally in the niche and that it is level. Align the appliance if necessary.

Do not adjust the door hinges to align the coffee machine. This could result in the milk flask not being able to be fitted correctly and milk preparation may not function properly.

84

*INSTALLATION*

Now screw the coffee machine into the furniture unit.

 Open the appliance door.

Installation

You can remove the door opening limiters to increase the opening angle to approx. 170°. This allows the bean containers to be removed more easily, for example.

2 TX20 screws (25 mm) are supplied.

 Secure the coffee machine to the side walls of the housing unit using the screws supplied. Tighten the screws by hand.

Useful tip: You can remove the door opening limiters and increase the door opening angle to 170° so that the screw on the left can be screwed in more easily. (see "Door opening limiters").

Check whether there is enough room and that the appliance door does not hit an adjacent wall.

 Check the operation of the coffee machine.

Removing the door opening limiters

Check whether there is enough room and that the appliance door does not hit an adjacent wall when the door opening angle is increased.

Door opening limiters

The door hinges of the coffee machine are equipped with door opening limiters that limit the opening angle of the appliance door to approx. 120°. These prevent the appliance door from hitting an adjacent wall when opened and being damaged.

 Remove the door opening limiters from the hinges by levering them out with a screwdriver, for example.

The door opening angle is now increased to approx. 170°.

85

Technical data

Electricity consumption in standby:

Electricity consumption in networked standby:

Frequency band of the Wi-Fi module

Maximum transmission power of the

Wi-Fi module

< 0.6 Watt

< 0.9 Watt

2.4000 GHz – 2.4835 GHz

< 100 mW

86

Miele Australia Pty. Ltd.

ACN 005 635 398

ABN 96 005 635 398

Miele Head Office Melbourne:

Level 4, 141 Camberwell Road

Hawthorn East, VIC 3123

Miele Experience Centre Doncaster:

1136/7 Doncaster Shopping Centre

619 Doncaster Rd, Doncaster, VIC 3108

Miele Experience Centre South Melbourne:

206-210 Coventry Street

South Melbourne, VIC 3205

Miele Experience Centre and Office Sydney:

3 Skyline Place

Frenchs Forest, NSW 2086

Miele Experience Centre and Office Brisbane:

Tenancy 4C, 63 Skyring Terrace

Newstead, QLD 4006

Miele Experience Centre Gold Coast:

131 Ferry Road

Southport, QLD 4215

Miele Experience Centre and Office Adelaide:

83-85 Sir Donald Bradman Drive

Hilton, SA 5033

Miele Experience Centre and Office Perth:

205-207 Stirling Highway

Claremont, WA 6010

1300 464 353 (1300 4 MIELE) www.miele.com.au

Miele New Zealand Limited

IRD 98 463 631

Miele Experience Centre and Head Office Auckland:

8 College Hill

Freemans Bay, Auckland 1011

Miele Experience Centre

Wellington:

183 Featherston Street

Wellington 6011

0800 464 353 (0800 4 MIELE) www.miele.co.nz

Miele Global Headquarters

Germany

Miele & Cie. KG

Carl-Miele-Straße 29

33332 Gütersloh

Federal Republic of Germany

CVA 7440 en – AU, NZ M.-Nr. 11 859 650 / 02

advertisement

Key Features

  • Built-in Fully-auto Capsule coffee machine 2.7 L
  • Coffee beans
  • Built-in grinder Adjustable coffee strength Hot water system Built-in display
  • Coffee making Espresso making Cappuccino making
  • Wi-Fi
  • 1450 W
  • Stainless steel

Related manuals

advertisement

Table of contents