SKF Reliability Systems - Condition Monitoring Essentials

SKF Reliability Systems - Condition Monitoring Essentials
Condition Monitoring
Essentials
Global presence – local solutions
With over 100 years of experience, SKF stands alone as a total solution provider for maximizing machine and plant productivity. With a reputation for quality, technological innovation
and service that spans the globe, SKF brings what no other vendor can to the maintenance
arena.
Local SKF sales and service representatives and worldwide distributors provide access to
the range of SKF bearings, maintenance products, lubricants, condition monitoring instrumentation and software, independent of your location.
In any kind of rotating machinery, from huge rolling machines to the smallest of motors,
the bearing knows if there is a potential problem. As the primary interface between moving
parts, the bearing is literally the diagnostic heart of the machine.
Misalignment, unbalance, looseness and friction are all telegraphed through the bearing.
Understanding the information coming from this diagnostic “pulse” and then applying the
latest and best technology to the problem is the key to raising machine productivity and lowering operating costs.
This SKF condition monitoring essentials product catalogue features a convenient collection of monitoring tools that no industrial manufacturing plant should be without.
2
Contents
SKF standard product offering
Description
Page
Description
Page
Description
Page
25
SKF Machine Condition
Advisor
CMAS 100-SL
6
SKF Machine Condition
Detector Pro IS
CMVL 3600-IS
SKF Infrared
Thermometer
CMSS 3000-SL
11
Loop-powered vibration
transmitters series
CMSS 420VT /
CMCP 420 VT-T
29
SKF Inspector 400
Ultrasonic Probe
CMIN 400-K
13
General purpose
industrial accelerometer
CMSS 2100
32
SKF Basic Condition
Monitoring kit
CMAK 400-ML
16
34
SKF Bearing
Assessment kit
CMAK 300-SL
17
General purpose, low
profile, side exit,
industrial accelerometer
CMSS 2200 /
CMSS 2200-M8
Vibration sensor cables
CMSS 93x series
36
Industrial cable
connector assemblies
for vibration sensors
CMSS 932-68
37
SKF Electric Motor
Assessment kit
CMAK 200-SL
18
SKF Wireless MicroVibe
CMVL 4000-ML
20
Junction boxes and
enclosures
CMSS 260, CMSS 265,
CMSS 300 and
CMSS 310 series
39
NEMA 4 and NEMA 4X
enclosures
CMSS 260 series
40
Termination junction
boxes
CMSS 265 series
41
BNC junction boxes
CMSS 300 series
42
Switchable BNC junction
boxes
CMSS 310 series
44
SKF Machine Condition
Transmitter (MCT)
systems
CMSS 5301 / CMSS 5302
47
3
SKF – the knowledge engineering
company
From one simple but
inspired solution to
a misalignment
problem in a textile
mill in Sweden, and
fifteen employees in
1907, SKF has
grown to become a
global industrial
knowledge leader.
Over the years we have built on our expertise in bearings, extending it to seals, mechatronics, services and lubrication systems.
Our knowledge network includes 46 000
employees, 15 000 distributor partners,
offices in more than 130 countries, and a
growing number of SKF Solution Factory
sites around the world.
Research and development
Meeting the toughest challenges
Working for a sustainable future
Our network of knowledge and experience
along with our understanding of how our
core technologies can be combined helps
us create innovative solutions that meet the
toughest of challenges. We work closely with
our customers throughout the asset life
cycle, helping them to profitably and
responsibly grow their businesses.
Since 2005, SKF has worked to reduce the
negative environmental impact from our
own operations and those of our suppliers.
Our continuing technology development
introduced the SKF BeyondZero portfolio
of products and services which improve
efficiency and reduce energy losses, as well
as enable new technologies harnessing
wind, solar and ocean power. This combined
approach helps reduce the environmental
impact both in our own operations and in
our customers’.
We have hands-on experience in over forty
industries, based on our employees’ knowledge of real life conditions. In addition our
world-leading experts and university partners who pioneer advanced theoretical
research and development in areas including tribology, condition monitoring, asset
management and bearing life theory. Our
ongoing commitment to research and
development helps us keep our customers
at the forefront of their industries.
SKF Solution Factory makes SKF knowledge and manufacturing expertise
available locally, to provide unique solutions and services to our customers.
4
Working with SKF IT and logistics systems and application experts, SKF
Authorized Distributors deliver a valuable mix of product and application
knowledge to customers worldwide.
Innovative solutions
Whether the application is linear or rotary
or a combination of the two, SKF engineers
can work with you at each stage of the asset
life cycle to improve machine performance
by looking at the entire application. This
approach doesn’t just focus on individual
components like bearings or seals. It looks
at the whole application to see how each
component interacts with the next.
an
d
dc
om
m
ai
n
ission
Spec
ific
Our objective is to help our customers
improve productivity, minimize maintenance, achieve higher energy and resource
efficiency, and optimize designs for long
service life and reliability.
SKF Life Cycle
Management
st
te
Working closely with you
Man
ufa
ctu
re
an
d
SKF Life Cycle Management is how we combine our technology
platforms and advanced services, and apply them at each stage
of the asset life cycle, to help our customers to be more
successful, sustainable and profitable.
ion
at
int
Ma
Our knowledge
– your success
Design and develo
p
rep
air
Opera
te and monitor
an
all
t
s
In
Bearings
SKF is the world leader in the design, development
and manufacture of high performance rolling
bearings, plain bearings, bearing units and
housings.
Machinery maintenance
Condition monitoring technologies and main­
tenance services from SKF can help minimize
unplanned downtime, improve operational
efficiency and reduce maintenance costs.
Sealing solutions
SKF offers standard seals and custom engineered
sealing solutions to increase uptime, improve
machine reliability, reduce friction and power
losses, and extend lubricant life.
Design optimization and verification
SKF can work with you to optimize current
or new designs with proprietary 3-D modeling software that can also be used as a virtual test rig to confirm the integrity of the
design.
Mechatronics
SKF fly­by­wire systems for aircraft and drive­by­
wire systems for off­road, agricultural and forklift
applications replace heavy, grease or oil consuming
mechanical and hydraulic systems.
Lubrication solutions
From specialized lubricants to state­of­the­art
lubrication systems and lubrication management
services, lubrication solutions from SKF can help to
reduce lubrication related downtime and lubricant
consumption.
Actuation and motion control
With a wide assortment of products – from actu­
ators and ball screws to profile rail guides – SKF
can work with you to solve your most pressing
linear system challenges.
5
SKF Machine Condition Advisor
CMAS 100-SL
Machine monitoring, made simple
Now both novice users and experts can easily, quickly,
and accurately check the condition of rotating equipment throughout your facility. Equipping your maintenance and operations personnel with this rugged,
ergonomic and easy-to-use instrument can provide
early warning of potential machine problems before a
costly failure occurs.
Features
• Quick and easy to set up and use, measurements are shown on a
bright display viewable in low light to direct sunlight. Free on-line
training is also available at SKF @ptitude Exchange.
• Lightweight, compact, and ergonomically designed, the SKF
Machine Condition Advisor fits neatly at the belt line, in a pocket or
a tool kit. Exceptionally durable, the unit is rated IP 54 for use in
industrial environments.
• Alert and Danger prompts provide increased diagnostic confidence.
• Measuring velocity, enveloped acceleration and temperature
simultaneously saves time.
• Efficient, economical and environmentally friendly, the rechargeable SKF Machine Condition Advisor operates 10 hours on a single
charge.
• Flexible enough to work with standard 100 mV/g constant current
accelerometers, an optional external sensor can be used for hardto-reach locations and for more repeatable and accurate measurement results.
• Features English, French, German, Portuguese, Spanish and
Swedish for user convenience.
6
SKF Machine Condition Advisor
simultaneously measures
vibration signals and
temperature to indicate machine
health or bearing damage.
Multiple measurements with a single device
The SKF Machine Condition Advisor provides an overall “velocity”
vibration reading that measures vibration signals from the machine
and automatically compares them to pre-programmed International
Organization for Standardization (ISO) guidelines. An “Alert” or
“Danger” alarm displays when measurements exceed those guidelines. Simultaneously an “enveloped acceleration” measurement is
taken and compared to established bearing vibration guidelines to
verify conformity or indicate potential bearing damage.
The SKF Machine Condition Advisor also measures temperature
using an infrared sensor to indicate uncharacteristic heat.
Accuracy, flexibility and confidence
When performing measurements, the SKF Machine Condition Advisor’s acceleration sensor input signal is processed to produce two
different measurements for each POINT on the machinery – overall
velocity and enveloped acceleration.
SKF Machine Condition Advisor CMAS 100-SL
At the same time, the SKF Machine Condition Advisor’s non-contact
infrared sensor measures the surface temperature of the measurement location and simultaneously displays all three measurement
values.
Depending on the SKF Machine Condition Advisor’s System setting, the front-panel LCD simultaneously displays:
• Metric or Imperial units
• Velocity in mm/s RMS or in./s derived Peak
• Temperature in Celsius or Fahrenheit
• Acceleration enveloping readings in gE
Quick and easy – first time and every time
1 Press Select or Browse button to turn the SKF Machine Condition
Advisor “On”.
2 Press the sensor tip against the point to be measured.
3 When the readings stabilize, press the Select button to hold the
reading.
4 Read and record the measurement values.
Specifications
• Vibration pickup:
–– Internal: Integrated piezoelectric acceleration
–– External: Accepts a standard 100 mV/g constant current
accelerometer
• Temperature sensor: Internal infrared temperature sensor
• Measurements:
–– Velocity:
·· Range: 0,7 to 65,0 mm/s (RMS) (0.04 to 3.60 in./s (equivalent
Peak)), meets ISO 10816-3
·· Frequency: 10 to 1 000 Hz, meets ISO 2954
–– Enveloped acceleration:
·· Range: 0,2 to 50,0 gE
·· Frequency: Similar to Band 3 (500 to 10 000 Hz)
–– Temperature:
·· Range: –20 to +200 °C (–5 to +390 °F)
·· Infrared temperature accuracy: 2 °C (4 °F)
·· Distance: Short range, maximum 10 cm (4 in.) from target
• Operating temperature range:
–– In use: –10 to +60 °C (15 to 140 °F)
–– While charging: 0 to 40 °C (30 to 105 °F)
• Storage temperature:
–– Less than one month: –20 to +45 °C (–5 to +115 °F)
–– More than one month, but less than six months:
–20 to +35 °C (–5 to +95 °F)
• Humidity: 95% relative humidity, non-condensing
• Enclosure: IP 54
• Approvals: CE
• Drop test: 2 m (6.6 ft.)
• Weight: 125 g (4.4 oz.)
• Dimensions:
–– Length: 200,0 mm (7.90 in.)
–– Width: 47,0 mm (1.85 in.)
–– Height: 25,4 mm (1.00 in.)
• Battery life: 10 hours before charging again (≈ 1 000 measurements)
–– With external sensor: Up to 55% less battery life
• Supported external sensor: Any standard accelerometer with
100 mV/g sensitivity constant current
• External sensor power: 24 V DC at 3,5 mA
• Charger specifications:
–– Universal AC/DC wall plug-in
–– Input: 90 to 264 V AC, 47 to 60 Hz
–– Output: 5 V DC regulated
–– 3 to 4 hours for a full charge
LCD display in measurement mode
Enveloped Acceleration
Temperature
Velocity
Alarm display:
(A) Alert or
(D) Danger
Measurement sta-Enveloped
tus
Acceleration
class
ISO machine
group
Select
button
Browse
button
Battery
indicator
(60% full)
7
SKF Machine Condition Advisor CMAS 100-SL
Understanding and using guidelines for vibration
The SKF Machine Condition Advisor provides a means to evaluate
machine health based on ISO 10816-3 and to evaluate the bearings
according to general guidelines developed from a statistical analysis
of existing databases.
How to choose the correct “Alarm Velocity Group” for your
machinery
The Alarm Velocity Group (G2&4 or G1&3) determines the instrument’s “overall vibration” alarm limits. Therefore, select the Group
that best describes the general size, type, and speed of the machinery being measured. Note that these machine group classifications
are set forth in ISO 10816-3, which rates overall velocity vibration
levels for standardized machinery classifications.
Groups 2 and 4 (default)
ISO Group 2 and 4 classifications define the following type of
machinery:
• Medium-sized machines and electrical machines with a shaft
height between 160 and 315 mm (6.3 and 12.4 in.).
• These machines are normally equipped with rolling element
bearings, but may use sleeve bearings, and operate at speeds
above 600 r/min.
• These machines include pumps withmulti-vane impellers and
integrated drivers.
Groups 1 and 3
ISO Group 1 and 3 classifications define the following type of
machinery:
• Large machinery and electrical machines with a shaft height
greater than 315 mm (12.4 in.).
• These machines are generally equipped with sleeve bearings, but
may use rolling element bearings.
• These machines include pumps with multi-vane impellers and
separated drivers.
Rigid or Flexible foundation?
An additional setting allows the specification (when defining the
overall alarm levels) of measurements taken from machinery with
rigid (default) or flexible foundations.
Options are:
G2 and 4R (default)
Alert: 2,8 mm/s (0.16 in./s)
Danger: 4,5 mm/s (0.25 in./s)
G2 and 4F
Alert: 4,5 mm/s (0.25 in./s)
Danger: 7,1 mm/s (0.39 in./s)
G1 and 3R
Alert: 4,5 mm/s (0.25 in./s)
Danger: 7,1 mm/s (0.39 in./s)
G1 and 3F
Alert: 7,1 mm/s (0.39 in./s)
Danger: 11,0 mm/s (0.61 in./s)
How to choose the correct “Enveloped Acceleration
Classification” for your machinery
The Enveloped Acceleration Classification (CL1, CL2 or CL3) you
specify determines the instrument’s “bearing vibration” alarm levels.
Therefore, the Enveloped Acceleration Classification that best
describes the general size and speed of the bearings being
measured should be selected.
Options are:
CL1
Bearings with a bearing bore diameter be-tween 200 and 500 mm
(7.9 and 19.7 in.) and a shaft speed below 500 r/min.
Alert: 1 gE
Danger: 2 gE
CL2 (default)
Bearings with a bearing bore diameter between 50 and 300 mm
(2.0 and 11.8 in.) and a shaft speed between 500 and 1 800 r/min.
Alert: 2 gE
Danger: 4 gE
CL3
Bearings with a bearing bore diameter be-tween 20 and 150 mm
(0.8 and 5.9 in.) and a shaft speed from 1 800 to 3 600 r/min.
Alert: 4 gE
Danger: 10 gE
Note:
As with all commonly published severity guidelines, the above provides target
thresholds for new, refurbished and recently maintained equipment.
In addition, if both lower limits of the guideline are used (for example in CL2, a 50 mm
bearing bore diameter at 500 r/min), the applicable alarm values maybe lower. Note
that bearing bore diameter is equal to shaft height.
8
SKF Machine Condition Advisor CMAS 100-SL
Expanding your capabilities with SKF Machine
Condition Advisor compatible accessories
Accelerometer specifications:
Extension sensor kit, Model CMAC 112-K
• Sensitivity (±15%): 10,2 mV/(m/s2) (100 mV/g)
• Dynamic range: 784 m/s2 (80 g peak)
• Frequency response:
–– ±3 dB: 24 to 720 000 CPM (0,4 to 12 000 Hz)
–– ±10%: 42 to 480 000 CPM (0,7 to 8 000 Hz)
–– ±5%: 60 to 360 000 CPM (1,0 to 6 000 Hz)
The extension sensor kit CMAC 112-K contains an accelerometer
with coiled integral cable (CMAC 111) and magnet (CMAC 109) with
mounting stud. This kit is needed to take measurements from hardto-reach places and for more repeatable and accurate measurement
results.
Dynamic performance
Electrical
• Voltage source: 18 to 30 V DC
• Constant current excitation: 2 to 10 mA
• Spectral noise at:
–– 10 Hz: 7 μg/√Hz
–– 100 Hz: 4 μg/√Hz
–– 1 000 Hz: 2 μg/√Hz
• Output impedance: < 100 Ω
• Bias output voltage: 12 V DC
• Grounding: Case isolated, internally shielded
CMAC 112-K extension sensor kit
Physical
• Sensing element and structure: PZT, shear
• Weight: 150,5 g (3.5 oz.)
• Case material: 316L stainless steel
• Mounting: 1/4-28 tapped hole
• Resonant frequency: 1 800 000 CPM (30 000 Hz)
• Calibration certificate: CAL-Cert CMAC 111
Accelerometer
• 100 mV/g sensitivity
• Small size case
• 0,4 to 12 000 Hz frequency response (±3 dB)
• Submersible
Environmental
• Temperature range:
–– Sensor head: –50 to +120 °C (–60 to +250 °F)
–– Cable: –40 to +80 °C (–40 to +175 °F)
• Maximum shock protection: 49 km/s2 peak (5 000 g peak)
• Electromagnetic sensitivity: CE
• Sealing welded: Hermetic
• Hydrostatic pressure: 100 psi
CMAC 111 accelerometer dimensions
ø 5 mm
(0.20 in.)
Integral cable
• Connector to SKF Machine Condition Advisor CMAS 100-SL
• CMAC 111 standard coiled cable length:
–– Cable length at rest: 0,95 m (3.0 ft)
–– Cable length extended: 2,3 m (7,5 ft)
• CMAC 111-5M straight cable, length: 5 m (16,4 ft)
• CMAC 111-10M straight cable, length: 10 m (32,8 ft)
80 mm
(3.15 in.)
ø 17 mm
(0.67 in.)
38 mm
(1.50 in.)
MODEL CMAC111
S/N 0007
11/16 in. hex
1/4-28
mounting hole
ø 19 mm
(0.75 in.)
9
SKF Machine Condition Advisor CMAS 100-SL
Ordering information
Magnet
• 14 kg (30 lbs.) pull-strength
• 25 mm (1 in.) diameter
• 1/4-28 mounting hole
• Case material: Stainless steel
• Magnet material: Neodymium
CMAC 109 magnet dimensions
SKF Machine Condition Advisor CMAS 100-SL includes:
1/4-28
mounting hole
• SKF Machine Condition Advisor unit
• Belt holster [CMAC 102]
• Charger, international DC power supply [CMAC 8004]
• User manual, English hard copy [32131800-EN]
• CD containing:
–– User manual available in PDF files in English, French, German,
Portuguese, Spanish and Swedish
–– Link to training on SKF @ptitude Exchange
–– SKF Machine Condition Advisor trend worksheet (Excel .xls file)
–– SKF Condition Monitoring Essentials catalog available in PDF
file in English [CM/P1 11704 EN]
Accessories
29,0 mm
(1.13 in.)
ø 25,0 mm
(1.00 in.)
Accelerometer connection cable, coiled (extended 2,3 m), Model
CMAC 107
• Extension kit, 100 mV/g accelerometer with 2,3 m coiled integral
cable and magnet [CMAC 112-K]
• Extension kit, 100 mV/g accelerometer with 5 m straight integral
cable and magnet [CMAC 112-K-5M]
• Extension kit, 100 mV/g accelerometer with 10 m straight integral
cable and magnet [CMAC 112-K-10M]
• Accelerometer connection cable, coiled with MIL-SPEC type connector for standard constant current 100 mV/g accelerometer
[CMAC 107]
• BNC connection cable, coiled with standard BNC connectors
[CMAC 108]
Replacement
BNC connection cable, coiled (extended 2,3 m), Model CMAC 108
• Charger, international DC power supply, +5 V, 1 600 mA, 90 to
264 V AC, 47 to 63 Hz [CMAC 8004]
• Magnet, magnet base, 1,0 in. diameter, 30 lbs. pull-strength
[CMAC 109]
• Belt holster [CMAC 102]
Optional connection cable for standard BNC connectors (e.g., the
CMSS 300 and CMSS 310 series of BNC junction boxes that connect
to constant current accelerometers with 100 mV/g.
Optional kits that include theSKF Machine Condition Advisor
CMAS 100-SL
Optional connection cable for standard constant current
accelerometers with 100 mV/g, MIL-SPEC connector.
• SKF Basic Condition Monitoring kit
[CMAK 400-ML]
• SKF Electric Motor Assessment kit [CMAK 200-EN]
• SKF Bearing Assessment kit
[CMAK 300-SL]
Connection options
10
SKF Infrared Thermometer
CMSS 3000-SL
Heavy duty, long range, dual laser sighted non-contact
infrared thermometer
There are many uses for this handheld non-contact, infrared thermometer. Rugged and easy to use – just aim, pull the trigger and
read the temperature in less than a second. Measures surface temperatures of hot, hazardous, moving or hard-to-reach objects safely
without contact.
Features
• Dual point laser sighting
• Adjustable emissivity
• 50:1 distance to spot size ratio
• Temperature range: –60 to +1 000 °C (–75 to +1 800 °F)
• Exceptional battery life
• High and low alarm
• MAX, MIN, DIF, AVG temperature displays
• Amber back-light LCD display
• High intensity white LED flashlight
• Heavy duty magnet in base of handle
• Hard case
Dual laser sighting and distance to spot ratio
Dual lasers provides easy aiming and defines the target area. The
target area is highlighted at all distances with two laser dot markers.
Laser 1 indicates one point of the measurement spot on one side of
the target area to be measured and Laser 2 indicates the location of
the diametrically opposed point on the other side of the measurement spot. At the focal point, where the spot size is the smallest, the
dots line up vertically, rotating as the SKF Infrared Thermometer is
moved closer or further from the target.
Description
Emissivity
The non-contact thermometer senses the thermal energy radiated
from an object with an infrared detector. When pointed at an object,
the infrared detector collects energy producing a signal that the
microprocessor translates as a reading on the backlit display. As the
trigger is squeezed, the object temperature is continuously measured by the infrared detector. This allows for fast and accurate realtime readings.
This instrument features an extended temperature range
–60 to +1 000 °C (–75 to +1 800 °F); dual laser sighting; bright
large amber back-light LCD display; Maximum, Minimum, Difference
(MAX-MIN) and “Lock” function for continuous temperature scanning; programmable High and Low audible alarms; selectable temperature units (°C or °F); low battery indicator, and adjustable emissivity for more accurate temperature measurements.
Emissivity is a term used to describe the energy-emitting characteristics of materials. Most organic materials and painted or oxidized
surfaces have an emissivity of 0,95. Inaccurate readings can result
from measuring shiny or polished metal surfaces. To compensate for
this, adjust the unit’s emissivity reading, or cover the surface to be
measured with masking tape or flat black paint (< 150 °C /300 °F).
Allow time for the tape or paint to reach the same temperature as
the material underneath it. Measure the temperature of the tape or
painted surface.
Distance to spot ratio 50:1
11
SKF Infrared Thermometer CMSS 3000-SL
Hard case
A water resistant, dust-proof case which holds the unit (and
magnetic stand) and measures 330 × 197 × 66 mm
(13.00 × 7.75 × 2.60 in.) is included.
Specification
• Measurement range: –60 to +1 000 °C (–75 to +1 800 °F)
• Operating range: 0 to 50 °C (30 to 120 °F)
• Accuracy (Tobject = 15 to 35 °C (60 to 95 °F),
Tambient = 25 °C (75 °F)): ±1 °C (±2 °F)
• Accuracy (Tobject = 35 to 1 000 °C (90 to 1 800 °F);
Tambient = 25 °C, ±3 °C (75 °F, ±5 °F)): ±2% of reading or
+2 °C (+4 °F), whichever is greater
• Update frequency: 1,4 Hz
• Wave length response: 8 to 14 µm
• Emissivity range: 0,95 default – adjustable 0,1 to 1 step 0,01
• Relative humidity: 5 to 95% non-condensing
• Resolution, from –9,9 to +199,9 °C (14.2 to 391.8 °F):
0,1 °C (0.2 °F)
• Response time (90%): < 1 sec
• Distance spot ratio: 50:1
• Dimensions:
–– Height: 203,3 mm (7.90 in.)
–– Width: 197,0 mm (7.71 in.)
–– Depth: 47,0 mm (1.85 in.)
• Weight: 386,1 g (13.62 oz.) including batteries
• Power: Two AAA batteries (included)
• Battery life: Typical 180 hours, minimum 140 hours continuous
use (Alkaline, without laser and back light)
• Modes: Maximum, Minimum, Average, Difference (MAX-MIN),
Lock (allows for continuous temperature scan)
Note:
Under an electromagnetic field of 3 V/m from 90 to 360 MHz the maximum
error is ±10 °C (±18 °F).
National Institute of Standards and Technology (NIST), traceable
factory calibration available.
Ordering information
• SKF non-contact Infrared Thermometer, including quick start
guide in standard languages (English, French, German,
Portuguese, Spanish and Swedish), two AAA batteries, hard
carrying case and magnetic stand [CMSS 3000-SL]
• DOC-CAL CERT CMSS 3000, NIST Certificate of Calibration
Accuracy (Watlow-Gordon XACT-CAL)
Optional kits that includes the SKF Infrared Thermometer,
CMSS 3000-SL
LCD display
Scanning in
progress
Laser function
ON/OFF
Battery low indicator
“Lock” function
for continuous
temperature
scanning
Selected temperature
unit (degrees °C / °F)
Average
Surface temperature
Average value
12
• SKF Basic Condition Monitoring kit [CMAK 400-ML]
–– SKF Machine Condition Advisor [CMAS 100-SL]
·· Extension kit, 100 mV/g accelerometer with coiled integral
cable and magnet [CMAC 112-K]
–– SKF Infrared Thermometer [CMSS 3000-SL]
–– SKF Inspector Ultrasonic Probe [CMIN 400]
• SKF Bearing Assessment kit [CMAK 300-SL]
–– SKF Machine Condition Advisor [CMAS 100-SL]
–– SKF Infrared Thermometer [CMSS 3000-SL]
–– SKF OilCheck [THEH1]
SKF Inspector 400 Ultrasonic Probe
CMIN 400-K
Complements your condition monitoring program
The analog SKF Inspector 400 Ultrasonic Probe is easy to use and
can detect early stages of machine problems.
This small approach to inspection can save money, energy and
time.
Features
• Detect pressure and vacuum leaks, including compressed air
• Check steam traps and valves quickly and accurately
• Detect arcing, tracking and corona in electric apparatus
• Test bearings, pumps, motors, compressors, etc.
Description
The SKF Inspector 400 Ultrasonic Probe senses high frequency
sounds produced by operating equipment, leaks and electrical discharges. It electronically translates these signals by a heterodyning
process, making them audible, so that a user can hear these sounds
through a headset and see them as intensity increments on a meter.
The SKF Inspector 400 Ultrasonic Probe can complement your
condition monitoring program by providing you with the following
capabilities:
Pressure/Vacuum leaks
Ultrasonic Probe, a leak can be heard through the headset as a
rushing sound or noted on the meter bar graph indicator. The closer
the instrument is to the leak, the louder the rushing sound and the
higher the meter reading. Should ambient noise be a problem, a
rubber focusing probe may be used to narrow the instrument’s
reception field and to shield it from conflicting ultra sounds.
Valve
Valve activity such as leakage or blockage can be accurately checked
while the valve is on line. Properly seated valves are relatively quiet
while leaking valves produce a turbulent flow as the fluid moves
from the high pressure side through the leak to the low pressure
side. Due to a wide sensitivity and ultrasonic frequency, all types of
valves even in noisy environments can be accurately tested.
As any gas (air, oxygen, nitrogen, etc.) passes through a leak orifice,
it generates a turbulent flow with detectable high frequency components. By scanning the test area with the SKF Inspector 400
Valve stems
Valve leakage
Pressure/Vacuum leaks
Valve stems may be quickly tested for leaks to atmosphere.
13
SKF Inspector 400 Ultrasonic Probe CMIN 400-K
Steam trap inspection
Major steam trap manufactur­ers have recommended ultra­sound
inspection of steam traps as one of the most reliable methods available. By converting the ultrasonic elements of a working steam trap
into the audible range, the SKF Inspector 400 Ultrasonic Probe
allows users to hear through headphones and see on a meter the
exact condition of a steam trap while it is on line. Blowby, machine
gunning, oversized traps or line blockage are all easily detected.
The SKF Inspector 400 Ultrasonic Probe markedly reduces confusion from extraneous sounds or from heat transfer, even when traps
are extremely close together.
General mechanical inspection of pumps, motors, compressors,
gears and gear boxes: all types of operating equipment may be
inspected with the SKF Inspector 400 Ultrasonic Probe. Since the
SKF Inspector 400 Ultrasonic Probe works in a high frequency, short
wave environment, problems such as cavitation in pumps, compressor valve leakage, or missing gear teeth may be heard and isolated.
Reciprocating compressor valve analysis has also become successful
with the SKF Inspector 400 Ultrasonic Probe and therefore many
engine analyzer companies now offer instruments with an ultrasonic
input port.
Electrical inspection
Heat exchangers, boilers and condensers
Arcing and corona discharge emit ultra sounds at the site of emission. This electrical discharge can be located quickly by scanning the
area with the SKF Inspector 400 Ultrasonic Probe. The signal is
heard as a frying or buzzing sound in the headset. As with pressure
or vacuum leak detection, the closer the instrument is to the discharge, the more intense the signal.
Test switch gear, transformers, circuit breakers, buss bars, relays,
junction boxes, insulators and other electrical gear.
In-leakage or pressure leakage can be readily located with the SKF
Inspector 400 Ultrasonic Probe. Fittings, valves and flanges are all
easily scanned for leakage. The high frequency, short wave nature of
ultrasound allows operators to pinpoint the location of a leak in high
noise environments.
Condenser tubes and heat exchanger tubes may be tested for
leakage through two methods: vacuum and pressure.
General mechanical inspection
The tube sheet is scanned for the tell-tale rushing sound produced
as the leak draws air into the tube.
The SKF Inspector 400 Ultrasonic Probe can detect the early stage
of a machine’s mechanical malfunction. NASA research has demonstrated that ultrasound monitoring will locate potential bearing deficiencies before they are detected by the traditional heat and vibration methods. With the SKF Inspector 400 Ultrasonic Probe, users
hear the sound quality of a bearing as well as monitor ampli­tude
changes on the meter. This complements other monitoring instruments and adds to the ability to trend, troubleshoot, and confirm
poten­tial bearing problems.
General mechanical inspection is easy with the SKF Inspector 400
Ultrasonic Probe and with very little training, users can learn to test
bearings within minutes. Current vibration programs can achieve
enhanced diagnostic ability with the SKF Inspector 400 Ultrasonic
Probe.
Prevent over-lubrication with the SKF Inspector 400 Ultrasonic
Probe by simply lubricating only until the meter reaches a specified
level. Over lubrication is one of the more common causes of bearing
failure.
Tank leakage
14
Vacuum
Pressure
Additional testing may be performed when the system is off-line
utilizing air pressure around the tube bundle and scanning for the
rushing sound produced from the leaking tube.
Applications
• Pressure and vacuum leak detection
• Valve seat leak detection
• Exhaust system leaks
• Heat exchangers, boilers, condensers
• Steam trap inspection
• Bearing testing
• Gear/Gearbox inspection
• General mechanical inspection and troubleshooting
• Tanks, pipes, etc., leak testing
Mechanical inspection
SKF Inspector 400 Ultrasonic Probe CMIN 400-K
SKF Inspector 400 Ultrasonic Probe Stethoscope/Scanner kit includes:
• SKF Inspector 400 Ultrasonic Probe pistol housing with LED bar
graph meter, eight-position sensitivity selection, low battery
indicator
• Scanning module
• Rubber focusing probe
• Stethoscope module
• Lightweight foam lined headset
• 9 V alkaline battery (replaceable)
• Cordura/Nylon soft pack carrying case
• Comprehensive instruction manual (English language)
Ordering information
• SKF Inspector 400 Ultrasonic Probe Stethoscope/Scanner kit
[CMIN 400-K] including:
–– Probe pistol housing with LED bar graph meter, eight-position
sensitivity selection, low battery indicator, scanning module,
rubber focusing probe, stethoscope module
–– Lightweight foam headset
–– 9 V alkaline battery
–– Instruction manual hard copy in English language
Specifications
• Construction: Handheld ABS pistol type ultrasonic processor,
stainless steel sensor enclosures
• Circuitry: SMD / solid state hybrid heterodyne receiver
• Frequency response: 20 to 100 kHz (centered at 38 to 42 kHz)
• Indicator: 10 segment LED bar graph (red)
• Sensitivity selection: Eight-position precision attenuation
• Power: 9 V alkaline battery
• Low battery voltage indicator: LED
• Headset: Lightweight foam lined double headset wired monophonic impedance; 16 Ω
• Probes: Scanning module stainless steel unisonic (single transducer) piezoelectric crystal type; stethoscope/contact module
stainless steel plug-in type with 14 cm (5.5 in.) stainless steel
waveguide
• Rubber focusing probe: Shields stray ultrasonic signals and
focuses detected signals
• Response time: 300 m/s
• Ambient operating temperature range: 0 to 50 °C (30 to 120 °F)
• Relative humidity: 10 to 95% non-condensing at up to
30 °C (85 °F)
• Storage temperature: –20 to 55 °C (0 to 130 °F)
• Dimensions:
–– Height: 133 mm (5.25 in.)
–– Width: 50 mm (2.00 in.)
–– Length: 203 mm (8.00 in.)
• Weight: 320 g (11 oz.)
• Carrying case: Cordura/Nylon soft pack with die cut foam
Accessories and replacement parts
• Lightweight foam lined headset [CMAC 8600-1]
• Deluxe noise isolating headphones [CMAC 8600-2]
• Deluxe noise isolating headphones to be worn with hard hat
[CMAC 8600-3]
• Utility belt with holster [CMAC 8600-4]
• Stainless steel unisonic scanning module [CMAC 8600-6]
• Stainless steel stethoscope/contact module [CMAC 8600-7]
• Stethoscope extension rods [CMAC 8600-8]
• Rubber focusing probe [CMAC 8600-9]
Optional kits that includes the SKF Inspector 400 Ultrasonic
Probe, CMIN 400-K
• SKF Basic Condition Monitoring kit [CMAK 400-ML]
–– SKF Machine Condition Advisor [CMAS 100-SL]
·· Extension kit, 100 mV/g accelerometer with coiled integral
cable and magnet [CMAC 112-K]
–– SKF Infrared Thermometer [CMSS 3000-SL]
–– SKF Inspector Ultrasonic Probe [CMIN 400]
15
SKF Basic Condition Monitoring kit
CMAK 400-ML
An essential collection of measurement tools for all industrial manufacturing plants, the SKF Basic Condition Monitoring kit makes
machine health monitoring a simple task for maintenance, operations, reliability and vibration analysis departments.
Features
• Assessment of overall machine condition
• Test bearings, pumps, motors, compressors, etc.
Multi-parameter machine assessment with
the SKF Basic Condition Monitoring kit:
SKF Machine Condition Advisor CMAS 100-SL
The SKF Machine Condition Advisor simultaneously measures
machine vibration signals and temperature to indicate machine
health and bearing condition.
SKF external sensor kit for the SKF Machine Condition Advisor
CMAC 112-K
The external vibration sensor with magnet provides convenience for
hard-to-reach surfaces and more repeatable and accurate measurements.
SKF Infrared Thermometer CMSS 3000-SL
The heavy duty SKF Infrared Thermometer is a dual laser sighted,
non-contact instrument for long range application.
• Dimensions:
–– Length: 450 mm (18 in.)
–– Width: 330 mm (13 in.)
–– Depth: 150 mm (6 in.)
• Material: 0.040 5052 H34 (or H32) aluminium – satin (mill) finish
• Features:
–– Valance (extrusion) – at joining ends (aluminium)
–– Continuous hinge (aluminium) – full length
–– Tubular handle (plated steel)
–– Two locking draw bolts (plated steel)
–– Eight reinforced corners (plated steel)
–– Four plastic bumpers – hinge side
–– Made in the USA
–– Briefcase pallet (faux leather)
–– Custom dye cut foam interior (1.3 lb/ft3 density)
• Color: Powder coated (blue)
Ordering information
SKF Inspector 400 Ultrasonic Probe CMIN 400-K
The SKF Inspector 400 Ultrasonic Probe senses high frequency
sounds produced by operating equipment, leaks and electrical discharges and makes them audible. The SKF Basic Condition Monitoring kit features all of the accessories from the SKF Inspector 400
Ultrasonic Probe kit.
Carrying case
The instruments are packaged in a light, durable aluminium carrying
case for industrial environments.
• Style: Riveted construction
• Weight: 2,6 kg (5.7 lb.) case only
SKF Machine
Condition Advisor
For additional
information on the
instruments included
in the kit, please refer
to the previous,
respective sections.
16
External sensor kit
SKF Basic Condition Monitoring kit [CMAK 400-ML] includes:
• SKF Machine Condition Advisor [CMAS 100-SL]
–– External sensor kit, 100 mV/g accelerometer with coiled
integral cable and magnet [CMAC 112-K]
• SKF Infrared Thermometer [CMSS 3000-SL]
• SKF Inspector 400 Ultrasonic Probe kit [CMIN 400-K]
–– Ultrasonic Probe pistol housing with LED bar graph meter
–– Lightweight foam lined headset [CMAC 8600-1]
–– Stainless steel unisonic scanning module [CMAC 8600-6]
–– Stainless steel stethoscope/contact module [CMAC 8600-7]
–– Stethoscope extension rods [CMAC 8600-8]
–– Rubber focusing probe [CMAC 8600-9]
SKF Infrared
Thermometer
SKF Inspector 400
Ultrasonic Probe
Carrying case
SKF Bearing Assessment kit
CMAK 300-SL
A convenient collection of measurement
devices for all industrial manufacturing
plants.
The basic SKF Bearing Assessment kit
makes the assessment of bearing condition
a simple task for maintenance, operations,
reliability and vibration analysis departments.
Features
• Check bearing and lubrication condition
• Assessment of overall machine condition
Multi-parameter machine
evaluation with the SKF
Bearing Assessment kit:
SKF Machine Condition Advisor CMAS
100-SL
The SKF Machine Condition Advisor simultaneously measures machine vibration signals
and temperature to indicate machine health
and bearing condition.
SKF Infrared Thermometer CMSS
3000-SL
The heavy duty SKF Infrared Thermometer
is a dual laser sighted, non-contact instrument for long range application.
For additional information on the instruments included in the kit, please refer to the previous, respective sections. For technical details on the SKF
OilCheck TMEH1, please see the following.
SKF OilCheck TMEH1
The SKF OilCheck indicates the degradation
and contamination level of oil, and detects
increased mechanical wear and loss of the
oil’s lubricating properties.
SKF Machine
Condition Advisor
• Handheld and user friendly
• Numerical readout to facilitate trending
• Shows changes in oil condition affected
by:
–– Water content
–– Fuel contamination
–– Metallic content
–– Oxidation
The usual contamination found in oils is
caused by oxidation and acid build up, which
occur during normal machinery operation
and typically show up as a gradual increase
in the oil’s “dielectric constant” readings over
a period of time. In addition, excessive wear
or mechanical failure may cause other contaminants to occur (i.e., dirt, soot, fuel,
water, antifreeze, metal particles, etc.).
These contaminants also cause an increase
in the oil’s dielectric constant.
The SKF OilCheck detects and measures
change in an oil’s dielectric constant by comparing measurements obtained from new
and used oil samples. Measuring and trending changes to an oil’s dielectric constant
level provides information that helps optimize intervals between oil changes, and
helps detect increased mechanical wear and
loss of the oil’s lubricating properties.
Technical Data
• Suitable oil types: Mineral and synthetic
oils
• Repeatability: Better than 5%
• Readout: Green/Red grading, numerical
value (0 to 100)
• Battery: 9 V Alkaline IEC 6LR61
• Battery lifetime: > 150 hours or 3 000
tests
SKF Infrared
Thermometer
SKF OilCheck TMEH1
• Dimensions:
–– Width: 95 mm (3.7 in.)
–– Height: 250 mm (9.8 in.)
–– Depth: 32 mm (1.3 in.)
Note:
The SKF OilCheck is not an analytical instrument.
It is an instrument to detect changes in the oil
condition only. The visual and numerical readouts
provide a guide and enable trending of the comparative readings of a good oil to a used oil of the
same type and brand.
Carrying case
The instruments are packaged in a light,
durable, aluminium carrying case for industrial environment.
• Weight: 2,6 kg (5.7 lb.) case only
• Dimensions:
–– Length: 450 mm (18 in.)
–– Width: 330 mm (13 in.)
–– Depth: 150 mm (6 in.)
• Color: Powder coated (blue)
Ordering information
SKF Bearing Assessment kit
[CMAK 300-SL] includes:
• SKF Machine Condition Advisor
[CMAS 100-SL]
• SKF Infrared Thermometer
[CMSS 3000-SL]
• SKF OilCheck [TMEH1]
Carrying case
For additional
information on the
instruments included
in the kit, please refer
to the previous,
respective sections.
17
SKF Electric Motor Assessment kit
CMAK 200-SL
For evaluation of electric motor bearings and
general machine health
A fitting bundle of two measurement devices for electric motors and
other industrial assets, the SKF Electric Motor Assessment kit makes
the evaluation of electric motor bearings and general machine
health simple.
Features
• Inspect and assess electric motor machine condition
• Measures:
–– Overall machine health
–– Bearing condition
• Safely detect electrical discharges in electric motors
• Ideal for novice and expert users
Multi-parameter measurements for electric
motors
SKF Machine Condition Advisor CMAS 100-SL
The SKF Machine Condition Advisor (MCA) simultaneously measures
machine vibration signals, specifically velocity, enveloped acceleration and temperature to indicate machine health and bearing condition.
For additional information on this instrument included in the kit, please refer
to the previous, respective section.
SKF Electric Discharge Detector Pen TKED 1
The SKF Electric Discharge Detector Pen (EDD Pen) is a simple to
use, handheld instrument that provides a unique, reliable and safe
way to detect electrical discharges in electric motor bearings.
Electrical discharges are a result of motor shaft voltages discharging to earth through the bearing, causing electrical erosion, lubricant
degradation and ultimately bearing failure.
SKF Machine Condition Advisor
18
SKF EDD pen
Electric motors are more vulnerable to suffer electrical erosion in
bearings when controlled by a variable frequency drive. When incorporated in a predictive maintenance program, the EDD Pen can help
detect bearings that are more susceptible to failure, and can help to
significantly prevent unplanned machine downtime.
• Unique remote solution allows operation at a distance from the
motors, which protects the user from touching machinery in
motion
• No special training required
• Capable of detecting electrical discharges on a time base of
10 seconds, 30 seconds or indefinite
• LED backlit screen allows use in low light environments
• IP 55 can be used in most industrial environments
Specifications
• Power supply: 4,5 V, 3 × standard AAA batteries (LR03, AM4)
• Time control:
–– Presets: 10 or 30 seconds
–– Default: Infinite
• Operational temperature: 0 to 50 °C (30 to 120 °F)
• Storage temperature: –20 to +70 °C (–5 to +160 °F)
• Ingress protection level: IP 55
• Display – LCD counter range: 0 to 99 999 discharges
• User selectable backlight and low battery warning
• Dimensions:
–– Length: 203,2 mm (8.0 in.)
–– Width: 48,3 mm (1.9 in.)
–– Depth: 20,3 mm (0.8 in.)
• Weight: 105 g (3.7 oz.)
SKF Electric Motor Assessment kit CMAK 200-SL
Since the 1990’s, the use of variable-frequency drives (VFDs) to
control alternating current (AC) motors has become very common, as they can save energy. However, the drawback of using
VFDs is the fact that electrical motors are more vulnerable to
suffer from electrical erosion in the bearings caused by electrical
discharge currents. Electrical erosion can cause bearings to fail
very prematurely, causing motor failure and unplanned downtime.
Until now there has not been an easy, cost effective method to
detect electrical discharge currents in electric motor bearings.
Thanks to the EDD Pen, this is now possible. Operating with only
two buttons, the EDD Pen allows everybody to detect electrical
discharge currents remotely in a safe way.
Unlike other traditional methods, the electrical discharge currents can be directly detected rather than measuring the effects
in later stages when damage has already occurred.
When incorporated into a predictive maintenance program,
the EDD Pen can significantly prevent unplanned machine
downtime.
Carrying case
The instruments are packaged in a durable
nylon carrying case.
• Weight: 113 g (4 oz.) case only
• Dimensions:
–– Length: 279 mm (11.0 in.)
–– Width: 229 mm (9.0 in.)
–– Depth: 64 mm (2.5 in.)
• Color: Black
Ordering information
• SKF Electric Motor Assessment kit CMAK 200-SL includes:
–– SKF Machine Condition Advisor [CMAS 100-SL]
–– SKF Electrical Discharge Detector Pen [TKED1]
–– Black nylon carrying case
Lubricant degradation caused by electrical discharge currents.
19
SKF Wireless MicroVibe
CMVL 4000-ML
Safe solution to portable data collection and analysis
The SKF Wireless MicroVibe in conjunction with an android tablet or
smart phone provides the functionality of a portable data collector
and analyzer. This versatile and easy-to-use wireless tool identifies
problems and assesses machine condition safely, quickly and easily.
The SKF Wireless MicroVibe CMVL 4000-ML multiple-language
version supports seven different languages.
Features
• Reliable and fast wireless data collection (WiFi) from a safe distance
• Low cost, compact and lightweight
• Expert judgment criteria based on ISO vibration severity standard
and SKF bearing condition evaluation
• FFT spectrum analysis enables user to pinpoint problems like
unbalance, misalignment, bearing, rubs, etc.
• Multi-point automation for faster data collection with standard
vibration measurements
• Envelope acceleration, acceleration, velocity and displacement in
both FFT spectrum and time waveform displays
• Transfer machinery vibration data to a computer for trending and
further analysis to the Data Management Software
Power without complexity
A handy “quick-check” solution, based on the universal Android platform, SKF Wireless MicroVibe is simple to use. Built-in automatic
functions virtually eliminate setup, while analytical displays and
automatic judgment of machine vibration readings help users identify machine problems on the spot!
An advanced instrument for simplified vibration assessment.
20
SKF Wireless MicroVibe CMVL 4000-ML
Multi-point automation saves time and improves reliability
The SKF Wireless MicroVibe collects and
displays overall vibration readings and automatically provides expert judgment of the
measured velocity and overall enveloped
acceleration levels, enabling immediate,
accurate and reliable assessment of
machine or bearing condition.
Automatically collect the most useful measurements for vibration analysis – acceleration, velocity, displacement and enveloped
acceleration – simultaneously. SKF’s multipoint automation saves time and enhances
the power, accuracy and overall reliability of
your decision making – giving you the information all in one view.
FFT spectrum analysis capabilities
With pre-set measurements and user selectable FFT resolution up
to 12 800 lines, selectable Fmax, and a 90 dB dynamic range, the
SKF Wireless MicroVibe has what it takes to help you easily pinpoint
impending machine problems. Cursor position readout with display
zoom optimizes your analysis power. In addition, it automatically
tabulates and displays the highest vibration peaks from a spectrum,
making it easy to quickly identify signals indicative of specific
machine problems, like misalignment, imbalance or bearing faults.
Time waveform displays
Measure and store time waveform data with the capability to select
measurement type and duration. Time waveform displays are available for acceleration, velocity, displacement or enveloped acceleration measurements.
Store and recall measurements for trending
and analysis
The data storage capacity is dependent upon the available memory
of the android device used. Dedicated devices can store thousands of
overall vibration signals, FFT spectrums and records of time waveform data for later recall. A search feature quickly retrieves specific
collected measurement, and a “repeat measurement” feature let’s
you recall and repeat any measurement for more focused analysis or
trending of a potential problem. Finally, a “recall data storage” list
helps you keep track of and reference all collected data.
21
SKF Wireless MicroVibe CMVL 4000-ML
Data management and software for your desktop computer
The SKF Wireless MicroVibe offers added functionality, including a
software program for Windows 7 to extract, save, edit and display
collected data. It is ideal for small route data collection.
Data may be uploaded to your desktop computer for further analysis
and trending using the data management software. Once uploaded,
vibration data, overall trends and spectra can be stored, trended,
graphically displayed and even exported to Microsoft Excel.
SKF's data management software
FFT spectrum analysis plot.
Waveform plot.
Trending and analysis plot.
22
SKF Wireless MicroVibe CMVL 4000-EN
Specifications
Measurement
Interface
• WiFi 802.11b/g, 128-bit WEP, WPA/WPA2 security
• Wireless communication mode: Infrastructure mode (point-topoint)
Power
• Power supply: Two (2) each "AAA" NiMH rechargeable batteries, 1
100 mAh
• Power consumption: 150 mA (while taking data and use of WiFi)
• Battery life with one charge: 5 hours
• Universal charger
–– Input: 100 to 240 V 50/60 Hz 0.5A
–– Output: 5 V at 2.1 A
Environmental
• Weight: 145 g (5.1 oz.)
• Dimensions:
–– Depth: 42 mm (1.62 in.)
–– Width: 40 mm (1.57 in.)
–– Height: 89 mm (3.50 in.)
• Operating temperature: 5 to 50 °C (40 to 120 °F), driven by the
battery
• Humidity: 30 to 90%, non-condensing
• Enclosure: IP 65 (ingress protection)
• Approval: CE
• Acceleration range: 50 g
• Frequency range:
–– Acceleration (A): 10 Hz to 30 kHz
–– Velocity (V): 10 Hz to 1 kHz
–– Displacement (D): 10 to 150 Hz
–– Enveloped Acceleration (E1): 5 to 100 Hz
–– Enveloped Acceleration (E2): 50 Hz to 1 kHz
–– Enveloped Acceleration (E3): 500 Hz to 10 kHz with Fmax of
5 kHz and 10 kHz
–– Enveloped Acceleration (E3)*: 500 Hz to 5 kHz with Fmax of
1.0 kHz
–– Enveloped Acceleration (E4)*: 5 to 20 kHz
* These frequencies vary from the standard filterbands used in the SKF Micrologs and SKF Multilog IMx.
• Sampling frequency:
–– A, E3, E4: 76,8 kHz
–– E1, E2, V, D: 38,4 kHz
• Aliasing frequency:
–– A, E3, E4: 20 kHz
–– E1, E2, V, D: 2 kHz
• Range (x100/20/5/1):
–– A: 0 to 1/5/20/100 g
–– E1, E2, E3, E4: 0 to 1/5/20/100 gE
Signal processing
• Velocity (x100/20/5/1 range): 0 to 10/50/200/1 000 mm/s
• Displacement (x100/20/5/1 range): 0 to 50/250/1 000/5 000 μm
• FFT:
–– Lines of resolution: up to 12 800
–– Averaging: Stable (linear), exponential, peak hold 1/2/4/8 times
• Window: Hanning, Rectangular, Flat Top
Sensor
• Piezoelectric (accelerometer)
• Sensitivity: 20 mV/g
• Sampling frequency: 76.8 kHz maximum
• A/D resolution: 16 bit
SKF Wireless MicroVibe
CMVL 4000-EN
Dimensions
40 mm
(1.57 in.)
2x AAA
NiMH
SKF Wireless MicroVibe
CMVL 4000-EN
89 mm
(3.50 in.)
M6 mounting
hole
42 mm
(1.65 in.)
USB
40 mm
(1.57 in.)
2x AAA
NiMH
23
SKF Wireless MicroVibe CMVL 4000-EN
Recommended Android Tablets
Highly recommended is the Nexus 7 series, with 7 inch LCD display.
The SKF Wireless MicroVibe application is verified to work with
the following Android devices as shown in Table 1 (please visit the
device compatibility matrix in skf.com/cm [Tablets] for current devices).
Android smartphones communicate with the SKF Wireless MicroVibe sensor module. Capturing vibration data is possible, but
uploads of data into the data management software is not assured.
Android tablets support the SKF Wireless MicroVibe's language
settings. Once a table is set to a standard language (see Table 2),
then the SKF MicroVibe application (version 3.2.0.5 or greater)
automatically switches to the selected language. The Data Management software includes language selection in the menu bar.
Table 1
Devices verified to work with the SKF Wireless MicroVibe
Name
OS version
Supplier
Note
Google Nexus 7
(Recommended)
Lollipop (5.0),
KitKat (4.4.2),
Jelly Bean (4.2.x)
ASUS/Google
7 inch
Venue
KitKat (4.4)
Dell
7 inch
Fonepad 7 ME372
KitKat (4.4),
Jelly Bean (4.3)
ASUS
7 inch
IdeaPad Tablet A1
Gingerbread (2.3)
Lenovo
7 inch
BizPad JT-H580VT
Honeycomb (3.2)
Panasonic
7 inch
Regza Tablet AT3S0/35D
Honeycomb (3.2)
Toshiba
7 inch
CT704
Ice Cream
Sandwich (4.0.4)
iDeaUSA
7 inch
Google Nexus 9
Lollipop (5.0)
ASUS/Google
8.9 inch
Table 2
Languages supported with the SKF Wireless MicroVibe
Tablet
Application
Data
Management
Software
User Manual
Hardware/Software
Quickstart
Guide
English
X
X
PDF/PDF
PDF
German
(Deutsch)
X
X
PDF/PDF
PDF
Chinese
X
X
PDF/PDF
PDF
French
(Francais)
X
X
na/na
PDF
Portuguese
(Portgues)
X
X
na/na
PDF
Spanish
(Espanol)
X
X
na/na
PDF
Swedish
(Svenska)
X
X
na/na
PDF
Language
24
SKF Wireless MicroVibe CMVL 4000-EN
Ordering information
SKF Wireless MicroVibe kit (WITHOUT Tablet*)
• CMVL 4000-ML SKF Wireless MicroVibe kit
–– Sensor module, one (1) each [CMVL 4000]
–– Probe (Stinger), one (1) each [CMAC 4020]
–– USB cable, sensor module to USB, one (1) each [CMAC 4015]
–– Universal USB power supply with four adapters, one (1) each
[CMAC 4010]
–– Two bar magnet, 18.1 kg (40 lbs.), one (1) each [CMAC 4025]
–– Battery (rechargeable), standard NiMH (AAA size), four (4)
each, [CMAC 4005]
–– Battery charger, wall charging unit for up to four AAA NiMH
batteries, one each [CMAC 4040]
–– CD: Data management software, mobile application, SKF User
Manual, one (1) each [CMAC 4060]
SKF Wireless MicroVibe CMVL 4000-ML turn-key package.
*NOTE: Necessary Android Tablets and Smartphones are not included and
are not offered by SKF.
Carrying case dimensions
(length × width × height):
350 × 110 × 245 mm
(13.8 × 4.3 × 9.6 in.).
NOTE: Necessary Android Tablets
are not included and are
not offered by SKF.
SKF Wireless MicroVibe CMAC 4035 carrying case with customizable foam.
25
SKF Machine Condition Detector Pro IS
CMVL 3600-IS
Intrinsic Safety (IS) rated
The SKF Machine Condition Detector Pro IS
(MCD Pro IS) is a rugged, handheld analysis
tool that captures and displays temperature,
velocity and enveloped acceleration (vibration) and alarms.
The SKF MCD Pro IS is certified Intrinsically Safe (IS) for use in hazardous environments that require either a Zone I or Class I,
Division I rating.
ATEX and North America hazardous conditions
approvals – the SKF Machine Condition
Detector Pro IS provides for velocity, enveloped
acceleration and temperature monitoring with
general alarm capabilities.
Features
• Multi-parameter measurements
• Simple machine monitoring
• Alarm capabilities for enhanced user confidence
Go/No Go machine monitoring
The MCD Pro IS is designed to provide a straightforward approach to
machinery monitoring. The instrument’s sensor affixes to a machine
point via a SKF MARLIN QuickConnect (MQC) stud or magnetic base
for automatic collection of vibration and temperature data. Green,
yellow and red LEDs provide easy to interpret indications of machine
status, so operations or maintenance personnel can quickly identify
the need for more in-depth analysis on a particular machine.
Multi-parameter monitoring capabilities
The MCD Pro IS operates as a stand-alone device or as an integral
component of the complete SKF Microlog Inspector system.
By pairing the MCD Pro IS with the SKF Microlog Inspector handheld device, important machinery and process information may be
stored for trending review. Data can also be transferred with the SKF
Microlog Inspector system from the MCD Pro IS to @ptitude Inspector software for further detailed analysis.
26
Vibration monitoring
When performing measurements, the MCD Pro IS’s sensor input
signal is processed to produce two vibration measurements for each
measurement POINT. Velocity vibration identifies phenomena that
are observable in the low to mid frequency range and indicates such
structural problems as misalignment, unbalance, mechanical looseness and more.
Events that occur in the higher frequency ranges, such as bearing
and gear problems, can also be detected by the MCD Pro IS with its
“acceleration enveloping” capability, a signal processing technique
that focuses on enhancing the repetitious vibration signals that
characterize such problems.
Temperature
Temperature measurements enhance the “early warning” benefit of
the instrument by offering a useful indication of mechanical condition or the load applied to a specific component, since as a bearing
or its lubrication fails, friction causes its temperature to rise.
SKF Machine Condition Detector Pro IS CMVL 3600-IS
General alarm capabilities
When used as a stand-alone tool, the MCD Pro IS may be easily
programmed for six alarm settings, which include the “alert” and
“danger” levels for each of the three measurements.
When measurements are taken, current measured values are
automatically compared to six user-defined settings, and the MCD
Pro IS’s alarm indicator and LEDs react appropriately. An “alert” condition provides the user with an early warning of impending problems for which immediate in-depth analysis should be performed. A
“danger” alarm indicates that a problem has escalated to a point
where actions must be made quickly to avoid a serious failure.
When used with the SKF Microlog Inspector, data is logged for
trending and percent change from last measurement and baseline
data.
SKF MARLIN QuickConnect
studs for quality, repeatable
data collection
Specially designed mechanical and computerized studs enable users to collect consistent, accurate and repeatable data from each measurement point. Engineered to work exclusively with the MCD Pro IS, the MQC mechanical and computerized
studs provide for a fast, quarter-turn connection that temporarily
fastens the probe to a measurement point. This reduces the possibility of errors and inconsistencies often resulting from data collected by using varying methodologies.
Specifications
Measurements
• Vibration pickup: Integrated piezoelectric acceleration (ceramic,
shear type)
• Measurement range:
–– Velocity: 0,3 to 55,0 mm/s (RMS) (0.02 to 3.00 in./s (Eq. Peak)),
meets ISO Standard 10861-3
–– Enveloped acceleration: 0,3 to 20,0 gE
–– Temperature: 0 to 100 °C (30 to 210 °F)
• Frequency range:
–– Overall velocity: 10 Hz to 1 kHz (tolerances measured within
the frequency range are in accordance with ISO 2954)
–– Acceleration enveloping band 3: 500 Hz to 10 kHz
Power
• Main power: Two 1,5 V alkaline AA batteries
• Battery lifetime: 30 hours
• Backup battery: One 3 V BR1225 Lithium-ion battery
• Auto off: Two minute countdown on last operation
User environment
• Operating temperature:
–– Ordinary locations: –20 to +60 °C (–5 to +140 °F )
–– Hazardous locations: –20 to +40 °C (–5 to +105 °F )
• Storage temperature: –35 to +70 °C (–30 to +160 °F)
• Humidity: 5 to 95% non-condensing
Hazardous area ratings
• Intrinsic Safety (IS):
––
II 1 G Ex ia IIC T4 Ga (Ta = –20 to +40 °C [–5 to +105 °F])
––
Class I, Division 1, Groups A, B, C, D T3A (+40 °C [+105 °F])
Physical characteristics
• Case: Water and dust resistant (IP 65)
• Drop test: 1,8 m (6 ft.) on multiple axes
• Dimensions:
–– Length: 190,5 mm (7.50 in.)
–– Width: 43,2 mm (1.70 in.)
–– Depth: 41,4 mm (1.63 in.)
• Weight: 431 g (0.95 lb.) with battery, 635 g (1.4 lb.) with
temperature magnet probe tip
• Display viewing area: 55,0 × 17,8 mm (2.17 × 0.70 in.)
• Communications port type: Micro D RS-232
Quick connect interface
• Receptacle: 1/4 turn, 5/8-24 two lead thread with contact
Accessories
• CMSS 26xx series: SKF MARLIN QuickConnect studs
27
SKF Machine Condition Detector Pro IS CMVL 3600-IS
Need to boost your plant’s
availability and reliability?
Start with operator driven reliability from SKF
For today’s power plants, optimizing output in the face of rising
operating costs, reduced manpower and stringent regulations is a
constant challenge. By enabling operators to take the lead in monitoring and maintaining equipment, the proven operator driven reliability (ODR) program from SKF is helping plants meet this challenge.
Why operator driven reliability?
Because of their proximity to equipment, operators are usually the
first to detect even the smallest changes in process conditions and
machinery health, including leaks, abnormal readings, excessive
heat, vibration or pressure.
In a successful ODR program, operators perform process parameter inspections, record and communicate observations on machine
performance, and make minor adjustments. Using technology to
automate these tasks facilitates consistency, accuracy and plantwide information sharing, all of which can enhance your production
and maintenance strategies.
With ODR, operators become an integral part of an overall reliability-based asset management strategy that can result in
increased productivity and reduced unplanned downtime.
Why choose SKF?
SKF knowledge engineering enables a comprehensive, single source
ODR solution. Featuring hand held monitoring devices, sensors and
software, SKF’s ODR system components work together seamlessly
and integrate with a plant’s computerized maintenance management and/or decision support system.
SKF has the experience and expertise to tailor an operator driven
reliability program to meet your facility’s unique goals and help
implement sustainable, continuous improvement.
Ordering information
SKF Machine Condition Detector MCD Pro IS
CMVL 3600-IS-K-01-C Kit
Each CMVL 3600-IS-K-01-C kit consists of the following items:
• SKF Machine Condition Detector Pro IS probe [CMVL 3600-IS]
• Temperature magnet probe tip for SKF Machine Condition
Detector Pro IS probe [CMAC 3610]
• AA Alkaline batteries, two each
• SKF Machine Condition Detector Pro IS setup key [CMAC 3620]
• SKF Machine Condition Detector Pro IS padded carrying case
[31736700]
• SKF Machine Condition Detector Pro IS user manual
[CMVL 3600M-SL]
• SKF Machine Condition Detector Pro IS quick start card
[CMVL 3600-QS]
• Vibration severity card
Optional
SKF MARLIN quick connect and mounting accessories
• SKF MARLIN quick connect interface receptacle, 1/4 turn, 5/8-24
two lead thread with contact
• SKF MARLIN quick connect mechanical M8 × 1,25 mounting
thread – three studs per package [CMSS 2600-3]
• SKF MARLIN quick connect mechanical 1/4-28 mounting
thread – three studs per package [CMSS 2610-3]
• SKF MARLIN quick connect computerized M8 × 1,25 mounting
thread – three studs per package [CMSS 2601-3]
• SKF MARLIN quick connect computerized 1/4-28 mounting thread
– three studs per package [CMSS 2611-3]
• Toolkit for spot face 1/4-28 [CMAC 9600-01]
• Toolkit for spot face M8 × 1,25 [CMAC 9600-02]
• Drill bit for 1/4-28 kit [CMAC 9600-03]
• Tap for 1/4-28 kit [CMAC 9600-04]
• Pilot for 1/4-28 kit [CMAC 9600-05]
• Drill bit for M8 × 1,25 kit [CMAC 9600-06]
• Tap for M8 × 1,25 kit [CMAC 9600-07]
• Pilot for M8 × 1,25 kit [CMAC 9600-08]
• End mill or counter bore for either kit [CMAC 9600-09]
• Toolkit for spot face M6 × 1,25 [CMAC 9600-10]
SKF Microlog Inspector systems (left to right):
CMDM 6700 series I-Pro, CMDM 5860 S-Pro
and the SKF Machine Condition Detector Pro IS.
28
SKF Machine Condition Detector Pro IS CMVL 3600-IS
Optional accessories
• SKF Machine Condition Detector Pro IS setup key [CMAC 3620]
• Temperature magnet for SKF Machine Condition Detector Pro IS
probe [CMAC 3610]
• Probe tip replacement kit for temperature magnet for SKF
Machine Condition Detector Pro IS [CMAC 3630]
• Magnetic probe tip for SKF Machine Condition Detector Pro IS
[CMAC 3611]
• Stinger probe 10 cm (4 in.) [CMSS 60139-04]
• 1/4-28 SKF MARLIN quick connect for stinger interface
[CMSS 2610-1]
• SKF Machine Condition Detector Pro IS quick start card
[CMVL 3600-QS]
• SKF Machine Condition Detector Pro IS user manual
[CMVL 3600M-SL]
CMAC 3600-IS MCD Pro IS probe
CMAC 3625 carrying case
Vibration severity card (front and back)
CMAC 3610 temperature magnet probe tip
CMAC 3620 setup key
Protective cover
29
Loop-powered vibration transmitters series
CMSS 420VT / CMCP 420VT-T
Simply, the most economical approach to preventive maintenance
Have somebody look after your rotating machinery, including
pumps, motors, fans, blowers, compressors and other machinery for
too much vibration. The SKF loop-powered vibration transmitter
works around the clock, seven days a week.
Features
• Solid-state reliability
• Integral sensor
• Standard 4 to 20 mA output
• Dynamic signal output for portable analyzers
• CE approved
• Approved Class 1, Division 2, Groups B, C, D for United States and
Canada
Description
Hazardous Location Safety
E112798
UL1604, CSA C22.2 No 213
Cl 1, Div 2, Grp B,C,D
24 VDC, 23 mA Max
Specifications
The CMSS 420 series are solid state, loop-powered vibration transmitters. They provide a 4 to 20 mA output that is proportional to
overall vibration in terms of velocity. The series of CMSS 420 continuously monitor machinery health and transmit directly into a PLC
or DCS for trending, alarm and machine shutdown. In addition, the
CMSS 420VT provides access to the dynamic transducer output. The
buffered output is available for temporary connection of portable
analyzers for detailed machine fault analysis.
In a addition, the CMCP 420VT-T provides a second 4 to 20 mA
output related to temperature.
CMSS 420VT velocity and dynamic signal output
Simple installation
CMCP 420VT-T velocity and temperature output
Simply mount the CMSS 420VT into a 1/4-28 or M8 tapped hole in
the bearing housing or machine case (NPT mounting adapters are
available, part number CMSS 203), connect two wires into a
4 to 20 mA loop, and you are ready to interface with a PLC or DCS.
Electrical conduit may be connected directly to the top 3/4 in. NPT
fitting (NPT mounting adapters are available, part number
CMSS 203).
30
Dynamic
• Output: 4 to 20 mA proportional to full scale velocity
• Accuracy: ±5% of full-scale
• Frequency response: 2 to 2 000 Hz
• Frequency response accuracy:
–– –3 dB: 2 Hz to 2 kHz
–– 10%: 10 Hz to 1 kHz
–– 5%: 15 to 750 Hz
• Buffered output: Acceleration, 100 mV/g
Dynamic
• Output 1: 4 to 20 mA proportional to full scale velocity
• Velocity accuracy: ±5% of full-scale
• Frequency response: 2 to 2 000 Hz
• Frequency response accuracy:
–– –3 dB: 2 Hz to 2 kHz
–– 10%: 10 Hz to 1 kHz
–– 5%: 15 to 750 Hz
• Output 2: 4 to 20 mA proportional to full scale temperature
–– From 0 to 100 °C (30 to 210 °F)
• Temperature accuracy: 2,5 °C at 85 °C (4.5 °F at 185 °F)
SKF loop-powered vibration transmitters series CMSS 420VT / CMCP 420 VT-T
CMSS 420VT and CMCP 420VT-T
Environmental
• Operating temperature: –20 to +80 °C (–5 to +175 °F)
• Sealed: Epoxy encapsulated
• Case material: Stainless steel 316L
• Mounting: Stud mounted
• Weight (without display): 227 g (8 oz.)
Regulatory approval
CE Mark: SKF loop-powered vibration transmitter CMSS 420 VT and
displays CMSS 420LCD and CMSS 420LED
Hazardous area ratings
Ordering information
• CMSS 420VT-1
–– 25,4 mm/s (0 to 1 in./s) RMS, includes 1/4-28 and M8 mounting studs
• CMSS 420VT-2
–– 50,8 mm/s (0 to 2 in./s) RMS, includes 1/4-28 and M8 mounting studs
• CMCP 420VT-T1
–– 25,4 mm/s (0 to 1 in./s) RMS, 0 to 100 °C (30 to 210 °F),
includes 1/4-28 and M8 mounting studs
• CMCP 420VT-T2
–– 50,8 mm/s (0 to 2 in./s) RMS, 0 to 100 °C (30 to 210 °F),
includes 1/4-28 and M8 mounting studs
• Suitable for use in Class I, Division 2, Groups B, C, D (United
States and Canada)
Optional display
Electrical ratings
• CMSS 420LED-01
–– 0 to 1 in./s
• CMSS 420LED-02
–– 0 to 2 in./s
• CMSS 420LED-51
–– 25,4 mm/s
• CMSS 420LED-52
–– 50,8 mm/s
• 22 to 36 V DC, 4 to 23 mA, provided from an external DC source
rated 36 V DC maximum, 23 mA maximum. The CMSS 420VT is
suitable for use in Class I, Division 2, Groups B, C, D.
• Maximum load: Up to 500 Ω resistive at 24 V DC and no display
(see note – maximum load resistance calculations for specific
requirements)
• Grounding: Case isolatedΩ
Light Emitting Diode display (LED)
Liquid Crystal Display (LCD)
• CMSS 420LCD-01
–– 0 to 1 in./s
• CMSS 420LCD-02
–– 0 to 2 in./s
• CMSS 420LCD-51
–– 25,4 mm/s
• CMSS 420LCD-52
–– 50,8 mm/s
Note: Maximum load resistance calculations:
DC supply voltage range: 22 to 36 V DC
Vs – 14 – Vd
RL max = –––––––––––
0,02
RL =Load resistance
Vs =DC supply voltage
Vd =Display voltage: 5,0 V DC for LED, 2,0 V DC for LCD, 0,0 V DC for
no display
The recommended Load Resistance (RL) for most installations is:
100 or 250 Ω at Vs = 24 V DC, with or without an LED/LCD display.
31
SKF loop-powered vibration transmitters series CMSS 420VT / CMCP 420 VT-T
Accessories
• CMSS 420LCD/CMSS 420LED display retrofit (requires
transmitter)
–– LCD displays actual vibration levels in velocity on a Liquid
Crystal Display. LED displays actual vibration levels in velocity
on a Light Emitting Diode display. The displays are shipped
loose, and it is a simple installation. Includes a BNC connector
that provides access to the raw acceleration signal for the
CMSS 420VT.
• CMSS 420BNC BNC adapter retrofit
–– 90 degree 3/4 in. NPT conduit elbow with a BNC connector to
access the raw acceleration signal. This is useful for connecting
the CMSS 420VT to the portable data collectors.
• CMSS 420EL 90 degree 3/4 in. by 3/4 in. NPT elbow
–– Useful for connecting CMSS 420VT to hard or flexible conduit.
When used with the CMSS 420WF, provides a simple
weatherproof exit for the instrument wire.
• CMSS 420WF 3/4 in. NPT weatherproof cable fitting
–– When used with the CMSS 420EL, provides a simple
weatherproof exit for the instrument wire.
• CMSS 203 pipe thread accelerometer mounting adapters
–– They are provided in several NPT sizes to accommodate the
most common plugs found on most machinery. The adapters
have a 1/4-28 threaded hole to mate with the CMSS 520 VT
and most common accelerometers and vibration transmitters.
·· CMSS 203-01 1/2 in. (NPT) National pipe tapered thread
·· CMSS 203-02 3/4 in. (NPT) National pipe tapered thread
·· CMSS 203-03 3/8 in. (NPT) National pipe tapered thread
·· CMSS 203-04 1/4 in. (NPT) National pipe tapered thread
CMSS 420LCD / CMSS 420LED display retrofit
CMSS 420EL NPT elbow
CMSS 420BNC BNC adapter retrofit
CMSS 420WF NPT weatherproof cable fitting
32
CMSS 203 pipe thread accelerometer mounting
adapter
General purpose industrial accelerometer
CMSS 2100
Limited
Lifetime
WARRANTY
Incorporating the latest in technology to meet the demanding
CE, EMC and low noise level requirements
Using detailed knowledge acquired from many years of supplying
high quality sensors to a broad spectrum of industry users, SKF
offers rugged accelerometers designed for the pulp and paper, petrochemical, steel, mining, construction, metal working and machine
tool industries.
Features
• For use with the SKF junction boxes, on-line systems, protection
systems and the portable data collection instruments
• Rugged, economical and all around general purpose sensor
• Sensitivity, 100 mV/g to optimize use in multiple applications
• Exceptional bias voltage (BV) stability at elevated temperatures
• Designed for exceptional low noise level for low elevated
temperatures
• Meets stringent CE, EMC requirements
• Smaller profile industrial accelerometers
• Two mounting studs (1/4-28 and M8 × 1,25) provided
• Corrosion resistant and hermetically sealed for humidity areas
• Reverse polarity wiring protection
Specifications
Specifications conform to ISA-RP-37.2 (1 to 64) and are typical
values referenced at 25 °C (75 °F), 24 V DC supply, 4 mA constant
current and 100 Hz.
Dynamic
• Sensitivity: 100 mV/g
• Sensitivity precision: ±5% at 25 °C (75 °F)
• Acceleration range: 80 g peak
• Amplitude linearity: ≤ 1%, up to full scale
• Frequency range:
–– ±5%; 3,0 to 5 000 Hz
–– ±10%; 1,0 to 9 000 Hz
–– ±3 dB; 0,5 to 14 000 Hz
• Resonance frequency: Mounted, nominal 30 kHz
• Transverse sensitivity: ≤ 5% of axial
Electrical
• Power requirements:
–– Voltage source: +24 V DC nominal, 18 to 30 V DC
–– Constant current diode: 2 to 10 mA DC, recommended 4 mA
• Electrical noise: 2,0 Hz; 20 µg/√Hz
• Output impedance: < 100 Ω
• Bias output voltage: 12 V DC
• Grounding: Case isolated, internal shielding
Environmental
• Temperature range: –50 to +120 °C (–60 to +250 °F), operating
temperature
• Vibration limits: 500 g peak
• Shock limit: 5 000 g peak
• Electromagnetic sensitivity, equivalent g, maximum: 70 µg/gauss
• Sealing: Hermetic
• Base strain sensitivity: 200 µg/microstrain
• CE: According to the generic immunity standard for Industrial
Environment EN50082-2.
• Acceptance Criteria: The generated “false equivalent g level” under
the above test conditions should be less than 2 mg peak to peak.
33
General purpose industrial accelerometer CMSS 2100
Physical
• Dimensions: See drawing
• Weight: 90 g (3.2 oz.)
• Case material: 316L stainless steel
• Mounting: Internal 1/4-28 thread; mounting studs provided: one
1/4-28 to 1/4-28 thread and one M8 × 1,25 thread
• Mounting torque: 2,9 Nm (24 in. lbs.)
• Connector:
–– Pin A: Signal/Power
–– Pin B: Common
• Mating connector: CMSS 3106F-10SL-4S or equivalent
• Recommended cable: Two conductor shielded, fluorine based
polymer jacket, 100 pF/m (30 pF/ft.)
Dimensions
Two pin connector
53,0 mm
(2.10 in.)
S/N S00000
19,0 mm
(0.75 in.)
22,3 mm
(0.87 in.)
A B
20,3 mm
(0.80 in.)
34
7/8 in. hex
1/4-28
Ordering information
• CMSS 2100 General purpose industrial accelerometer with top
exit MIL-C-5015 two pin connector.
–– 1/4-28 and M8 mounting studs provided. Calibration sensitivity
and nominal sensitivity is provided for each accelerometer
package.
MODEL CMSS2100
mounting
hole
General purpose, low profile, side
exit, industrial accelerometer
Limited
Lifetime
WARRANTY
CMSS 2200 / CMSS 2200-M8
Accelerometers sense vibration commonly found in most industrial
machinery. Applications for acceleration and velocity sensors include
machinery health monitoring of motors, fans, pumps, gearboxes,
blowers, machine tool spindles, compressors, chillers, rollers and
mixers. Maintenance professionals use accelerometers for predictive
maintenance to lower overall cost and increase machinery performance.
The CMSS 2200 / CMSS 2200-M8 with its side exit two pin connector offers a low profile for machinery with limited clearance. The
sensor mounts in any orientation.
Features
• For use with the SKF junction boxes, on-line systems, protection
systems and the portable data collection Instruments
• Rugged, economical and all around general purpose sensor
• Sensitivity, 100 mV/g to optimize use in multiple applications
• Exceptional bias voltage (BV) stability at elevated temperatures
• Designed for exceptional low noise level for low frequencies at
elevated temperatures
• Meets stringent CE, EMC requirements
• Low profile for side industrial accelerometer with captive
mounting bolts (1/4-28, M6 × 1.00 or M8 × 1,25) provided
• Corrosion resistant and hermetically sealed
• Reverse polarity wiring protection
Specifications
• Specifications conform to ISA-RP-37.2 (1 to 64) and are typical
values referenced at 25 °C (75 °F), 24 V DC supply, 4 mA constant
current and 100 Hz.
Environmental
• Temperature range: –50 to +120 °C (–60 to +250 °F), operating
temperature
• Vibration limits: 500 g peak
• Shock limit: 5 000 g peak
• Electromagnetic sensitivity, equivalent g, maximum: 70 µg/gauss
• Sealing: Hermetic
• Base strain sensitivity: 200 µg/microstrain
• CE: According to the generic immunity standard for Industrial
Environment EN50082-2
• Acceptance criteria: The generated “false equivalent g level” under
the above test conditions should be less than 2 mg peak to peak.
Dynamic
• Sensitivity: 100 mV/g
• Sensitivity precision: ±5% at 25 °C (75 °F)
• Acceleration range: 80 g peak
• Amplitude linearity: 1%
• Frequency range:
–– ±10%; 1,0 to 5 000 Hz
–– ±3 dB; 0,7 to 10 000 Hz
• Resonance frequency: Mounted, minimum 22 kHz
• Transverse sensitivity: ≤ 5% of axial
Electrical
• Power requirements:
–– Voltage source: 18 to 30 V DC
–– Constant current diode: 2 to 10 mA DC, recommended 4 mA
• Electrical noise: 2,0 Hz; 20 µg/√Hz
• Output impedance: < 100 Ω
• Bias output voltage: 12 V DC
• Grounding: Case isolated, internal shielding
35
General purpose, low profile, side exit, industrial accelerometer CMSS 2200 / CMSS 2200-M8
Physical
• Dimensions: See drawing
• Weight: 145 g (5.1 oz.)
• Case material: 316L stainless steel
• Mounting: Captive mounting bolts provided; one 1/4-28 thread
and one M6 × 1,00 thread
• Mounting torque: 3,4 Nm (30 in. lbs.)
• Connector:
–– Pin A: Signal/Power
–– Pin B: Common
• Mating connector: CMSS 3106F-10SL-4S or equivalent
• Recommended cable: Two conductor shielded, fluorine based
polymer jacket, 100 pF/m (30 pF/ft.)
Ordering information
• CMSS 2200 General purpose low profile industrial accelerometer
with side exit MIL-C-5015 two pin connector.
–– 1/4-28 and M6 mounting studs provided. Calibration sensitivity
and nominal sensitivity is provided for each accelerometer
package.
• CMSS 2200-M8 General purpose low profile industrial
accelerometer with side exit MIL-C-5015 two pin connector.
–– M8 mounting stud provided. Calibration sensitivity and nominal
sensitivity is provided for each accelerometer package.
Dimensions
1/4 in. socket head
captive screw
26,0 mm
40,0 mm (1.04 in.)
(1.60 in.)
6,3 mm
(0.25 in.)
MODEL CMSS2200
MODEL CMSS2200-M8
S/N S0000
23,0 mm
(0.92 in.)
CMSS 2200:
1/4-28 mounting
thread
CMSS 2200-M8:
M8 mounting
thread
25,0 mm
(1.00 in.)
37,0 mm
(1.44 in.)
53,0 mm
(2.10 in.)
Two pin connector
MIL-C-5015
36
Vibration sensor cables
Two-wire cable assembly
CMSS 93x series
Drain wire
Insulation
Conductor
Bulk cable
CMSS 932-SY/DY/SB and CMSS 933-SY
Jacket
Twisted pair or triads cables, single or double shielded, yellow or blue
jacket
Shield
Filter
SKF’s CMSS 93X-XX cables are premium sensor cables providing
superior performance in demanding environments.
CMSS 932 is a single or double shield, twisted pair cable with the
conductors individually insulated with a fluorine based polymer, a
braided shield with drain wire and an outer insulated jacket also
made of a fluorine based polymer. Two insulated conductors are
cabled together with one uninsulated drain wire and two glass cord
fillers. The double shielded option adds an inner shield of aluminum
polyester foil with drain wire.
The CMSS 933 has the same characteristics as the CMSS 932
cable, except the CMSS 933 is a three wire version for use with dual
temperature and vibration sensors. This cable does not have a double shielded option.
There are two wire colors (jackets) available:
Dimensions
• Yellow: For high visibility in the often dusty and debris laden
industrial environment
• Blue: For use in intrinsically safe circuits in the Oil/Gas and Hydrocarbon processing industries
• Capacitance: Approximately 89 pF/m (27 pF/ft.)
• Voltage rating: 600 V RMS maximum continuous use
Recommended uses
The single shield cable is recommended for use with sensors in normal industrial applications where these cable types have been previously used and installed.
The double shield cable is highly recommended for use with sensors in industrial installations where there is a high noise field, such
as machine tools and power generating facilities. Double shielded
versions include:
• Inner shield = Isolated
• Outer shield = Non-isolated
Specifications (all models)
Materials
• Conductor: Tin plated copper, 19 × 32 strands, size 20 AWG
(American Wire Gauge)
• Insulation: Extruded FEP
• Drain wire: Tin plated copper, 7 × 32 strands, size 24 AWG
• Shield: 36 AWG tin plated copper braid
• Jacket: Extruded FEP
• Conductor: 0,96 mm (0.038 in.) nominal
• Insulation: 1,40 mm (0.058 in.) nominal
• Drain wire: 0,61 mm (0.024 in.) nominal
• Shield: 3,50 mm (0.138 in.) nominal
• Jacket: 4,80 mm, ±0,1 mm (0.190 in., ±0.005 in.)
Environmental
• Minimum bend radius: 48 mm (1.9 in.)
• Working temperature range: –80 to +200 °C (–110 to +390 °F)
• Heat and flame resistance: Non-flame propagating
• Plenum rated
• Meets ROHS requirements
Electrical
Color code
• Two wire conductors:
–– A = White = Acceleration signal/power
–– B = Black = Common
• Three wire conductors:
–– A = Red = Acceleration signal/power
–– B = Black = Acceleration and temperature common
–– C = White = Temperature signal
• Jacket: Yellow (Y) or blue (B)
Ordering information
• CMSS 932-SY-150M Two-conductor, twisted pair, single shield,
yellow cable with continuous cable length, 150 m (500 ft.) spool.
• CMSS 932-SY-300M Two-conductor, twisted pair, single shield,
yellow cable with continuous cable length, 300 m (1 000 ft.)
spool.
• CMSS 932-DY-150M Two-conductor, twisted pair, double shield,
yellow cable with continuous cable length, 150 m (500 ft.) spool.
• CMSS 932-SB-150M Two-conductor, twisted pair, single shield,
blue cable with continuous cable length, 150 m (500 ft.) spool.
• CMSS 933-SY-150M Three-conductor, triad, single shield, yellow
cable with continuous cable length, 150 m (500 ft.) spool.
37
Industrial cable connector assemblies for
vibration sensors
CMSS 932-68
The CMSS 932-68 are rugged cable connector assemblies designed
for use with piezoelectric vibration sensors, which require high specification shielded cable to maximize the quality of the signal transmitted to the monitoring system. The assemblies are ingress protection rated (IP 68): allow no ingress of dust and are suitable for
continuous immersion in water. The CMSS 932-68 are two-wire
assemblies using a single or double shield, twisted pair cable with
the conductors individually insulated with a fluorine based polymer,
a braided shield with drain wire and an outer insulated jacket also
made of a fluorine based polymer.
The double shielded option adds an inner shield of aluminum
polyester foil with drain wire. There are two wire colors (jackets)
available:
• Yellow: For high visibility in the often dusty and debris laden
industrial environment
• Blue: For use in intrinsically safe circuits in the Oil/Gas and Hydrocarbon processing industries
Specifications
Cables
Two insulated conductors are cabled together with one uninsulated
drain wire and two glass cord fillers.
Materials
• Conductor: Tin plated copper, 19 × 32 strands, size 20 AWG
(American Wire Gauge)
• Insulation: Extruded FEP
• Drain wire: Tin plated copper, 7 × 32 strands, size 24 AWG
• Shield: 36 AWG tin plated copper braid
• Jacket: Extruded FEP
• Molded boot: Black fluoroelastomer, offering better chemical
resistance
• Adaptor / locking rings: Stainless steel
Color code
• Two wire conductors:
–– A = White = Acceleration signal/power
–– B = Black = Common
• Jacket: Yellow (Y) or blue (B)
38
Dimensions
• Conductor: 0,96 mm (0.038 in.) nominal
• Insulation: 1,40 mm (0.058 in.) nominal
• Drain wire: 0,61 mm (0.024 in.) nominal
• Shield: 3,50 mm (0.138 in.) nominal
• Jacket: 4,80 mm, ±0,1 mm (0.190 in., ±0.005 in.)
Electrical
• Capacitance: Approximately 89 pF/m (27 pF/ft.)
• Voltage rating: 600 V RMS maximum continuous use
Environmental
• Minimum bend radius: 48 mm (1.9 in.)
• Working temperature range: –80 to +200 °C (–110 to +390 °F)
• Heat and flame resistance: Non-flame propagating
• Plenum rated
• Meets ROHS requirements
Industrialized cable connector assemblies for vibration sensors CMSS 932-68
Connectors
Ordering example
MIL-style stainless steel connectors are designed for use with SKF
sensors. There are two different styles of IP 68 connectors:
CMSS 932-68TLI-SY-10M
• Two-wire, IP 68 connector, twist lock, isolated, single shield,
yellow, 10 m (32.8 ft.) length
CMSS 932-68LCN-SY-20M
• Two-wire, IP 68 connector, locking collar, non-isolated, single
shield, yellow, 20 m (65.6 ft.) length
CMSS 932-68TLX-SY-XXM: IP 68 sensor/connector/cable
assembly with twist lock.
The fluoroelastomer boot and a quarter twist locks the assembly
into a tight fit.
Note: Isolated connectors cannot be selected with double shielded
cables (e.g., part number CMSS 932-68LCI-DY-XXM is not valid).
As such, if a double shielded cable is required (shield = D), select a
non-isolated connector (non-isolated = N); for example:
• CMSS 932-68LCN-DY-5M
If an isolated connector is required (isolated = I), select a single
shielded cable (shield = S); for example:
• CMSS 932-68LCI-SY-5M
CMSS 932-68LCX-XX-XXX: IP 68 sensor/connector/cable
assembly with locking collar.
The locking collar is a threaded connector that threads onto an
accompanying sensor adapter. It is recommended to secure the sensor adapter to the accelerometer connector using thread lock (Loctite). The locking collar features an O-ring and metal locking ring and
is therefore more suitable for applications under water.
Double shielded cable should be grounded on both sides: the instrument side and the sensor side (through the machine). If an isolated
connector is selected with a double shielded cable, the sensor side
will be cut off and never connected to the sensor ground.
Ordering information
CMSS 932 Two-wire twisted pair cable / two-pin connector assembly.
Part number
CMSS 932–68aab-cd-eeM
68
IP 68 connector (immersion)
aa
TL
LC
Lock type
Twist lock
Locking collar
b
I
N
Isolated/Non-isolated
Isolated (must use single shielded)
Non-isolated
c
D
S
Shield
Double shielded (must use non-isolated)
Single shielded
d
Y
B
Jacket
Yellow jacket
Blue jacket
eeM
5M
10M
20M
XXM
Length
Length: 5 m (16.4 ft.)
Length: 10 m (32.8 ft.)
Length: 20 m (65.6 ft.)
Length: Specify XX meters, in 5 m increments
39
Junction boxes and enclosures
CMSS 260, CMSS 265, CMSS 300 and CMSS 310 series
• CMSS 260 series NEMA 4 and NEMA 4X enclosures
• CMSS 265 series termination junction boxes
• CMSS 300 series BNC junction boxes
• CMSS 310 series switchable BNC junction boxes
Industry standards
For all junction boxes and according to version (material)
Rating
Painted steel
Fiberglass
Stainless steel
UL 50
Type 4, 12 and 13
N/A
Type 3R, 4, 4X and 12
UL 508 A, UL 508
Type 4, 12 and 13
Type 3R, 4, 4X and 12
Type 3R, 4, 4X and 12
NEMA/EEMAC
Type 4, 12 and 13
Type 3R, 4, 4X and 12
Type 3R, 4, 4X and 12
JIC
EGP-1-1967
EGP-1-1967
EGP-1-1967
CSA
Type 4 and 12
Type 4, 4X and 12
Type 4, 4X and 12
IEC 60529
IP 66
IP 66
IP 66
CMSS 260 series NEMA 4 and NEMA 4X
enclosures
CMSS 310 series switchable BNC junction boxes
40
CMSS 265 series termination junction boxes
CMSS 300 series BNC junction boxes
NEMA 4 and NEMA 4X enclosures
CMSS 260 series
NEMA 4 and NEMA 4X enclosures are
provided by SKF for housing of any instrument
The enclosures’ covers have a continuous hinge on the long side of
the unit for convenience and are secured to the enclosure with
clamps. The enclosures are available in NEMA 4 or NEMA 4X to cover most applications. All enclosures are provided with an oil resistant
gasket and clamps for easy screwdriver access.
CMSS 260FG
CMSS 260PS
CMSS 260SS
NEMA 4X fiberglass enclosures
NEMA 4 painted steel enclosures
NEMA 4X stainless steel enclosures
NEMA 4X fiberglass enclosures are designed
for use in areas that may be regularly hosed
down or are very wet, and they are suitable
for indoor or outdoor installations.
The enclosure is used in highly corrosive
environments typically found in oil refineries, chemical processing plants, wastewater
treatment, marine installations, pulp and
paper processing, and electroplating plants.
These enclosures are designed for use in
areas that may be regularly hosed down or
are very wet, and they are suitable for
indoor or outdoor installations. Wherever
protection from dust, dirt, oil or hosedirected water is essential.
ANSI 61 powder coated on the interior
and exterior surfaces, constructed from
14 gauge mild steel.
Constructed from 14 gauge 304 stainless
steel rather than a mild steel. They are
designed for the same use as the NEMA 4
enclosures with the ability to resist corrosive
environments.
Ordering example: NEMA 4X fiberglass enclosure measuring 15,2 × 15,2 × 10,2 cm (6.0 × 6.0 × 4.0 in.) would be the SKF model number CMSS 260FG-01.
Ordering Information
Ordering Information
Ordering Information
Description CMSS 260FG-XX
Description CMSS 260PS-XX
Description CMSS 260SS-XX
-XX
NEMA 4X fiberglass
enclosures
-XX
NEMA 4 painted
steel enclosures
-XX
01
15,2 × 15,2 × 10,2 cm
(6.0 × 6.0 × 4.0 in.)
01
15,2 × 10,2 × 7,6 cm
(6.0 × 4.0 × 3.0 in.)
01
15,2 × 15,2 × 10,2 cm
(6.0 × 6.0 × 4.0 in.)
02
20,3 × 15,2 × 10,2 cm
(8.0 × 6.0 × 4.0 in.)
02
20,3 × 15,2 × 8,9 cm
(8.0 × 6.0 × 3.5 in.)
02
20,3 × 15,2 × 10,2 cm
(8.0 × 6.0 × 4.0 in.)
03
25,4 × 20,3 × 15,2 cm
(10.0 × 8.0 × 6.0 in.)
03
25,4 × 20,3 × 10,2 cm
(10.0 × 8.0 × 4.0 in.)
03
25,4 × 20,3 × 10,2 cm
(10.0 × 8.0 × 4.0 in.)
(dimensions: height × width × depth)
(dimensions: height × width × depth)
NEMA 4X stainless
steel enclosures
(dimensions: height × width × depth)
Note: The stainless and painted steel enclosures are not designed to accommodate the Machine Condition Transmitters (MCT).
41
Termination junction boxes
CMSS 265 series
Connecting centers by SKF
The CMSS 265 series termination junction boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring.
Crew clamp, DIN-rail mounted terminals (three inputs per
channel, usually signal, common and shield) are provided
for the intermediate termination of accelerometers, proximity probes, speed sensors, RTDs and other transducers.
The CMSS 265 series junction boxes are available in
three versions:
• NEMA 4X Fiberglass (FG)
• NEMA 4 Powder Coated Steel (PS)
• NEMA 4X Stainless Steel (SS)
CMSS 265FG
NEMA 4X fiberglass junction boxes
The CMSS 265FG NEMA 4X enclosures are
made of molded fiberglass polyester and is
easily punched or drilled. It has outstanding
chemical and temperature resistance and
physical properties. A seamless foam inplace gasket assures a watertight and dusttight seal. Screw covers are secured with
captivated Monel cover screws.
CMSS 265PS
CMSS 265SS
NEMA 4 powder coated steel junction
boxes
NEMA 4X stainless steel junction boxes
The CMSS 265PS NEMA 4 enclosure is
constructed of 14 gauge mild steel and is
ANSI 61 gray polyester powder coated on
the all surfaces. A seamless foam in-place
gasket assures a watertight and dust-tight
seal.
The CMSS 265SS NEMA 4X enclosure is
constructed from 14 gauge 304 stainless
steel. This enclosure will better resist corrosive environments than the CMSS 265PS
steel boxes. CMSS 265SS junction boxes
feature continuously welded seems, ground
smooth with no holes or knockouts. An oilresistant, in-place gasket assures a watertight and dust-tight seal. Stainless steel
screws and clamps are provided.
Ordering example: NEMA 4X stainless steel junction box with 16 channels and 48 terminals would be the SKF model number CMSS 265SS-16.
Ordering Information
Ordering Information
Ordering Information
Description CMSS 265FG-XX
Description CMSS 265PS-XX
Description CMSS 265SS-XX
-XX
NEMA 4X fiberglass
junction boxes
-XX
NEMA 4 powder coated
steel junction boxes
-XX
02
2 channels, 6 terminals – 15,2 × 15,2
× 10,2 cm (6.0 × 6.0 × 4.0 in.)
02
2 channels, 6 terminals – 15,2 × 15,2
× 10,2 cm (6.0 × 6.0 × 4.0 in.)
02
2 channels, 6 terminals – 15,2 × 15,2
× 10,2 cm (6.0 × 6.0 × 4.0 in.)
04
4 channels, 12 terminals – 15,2 ×
15,2 × 10,2 cm (6.0 × 6.0 × 4.0 in.)
04
4 channels, 12 terminals – 15,2 ×
15,2 × 10,2 cm (6.0 × 6.0 × 4.0 in.)
04
4 channels, 12 terminals – 15,2 ×
15,2 × 10,2 cm (6.0 × 6.0 × 4.0 in.)
08
8 channels, 24 terminals – 20,3 ×
15,2 × 10,2 cm (8.0 × 6.0 × 4.0 in.)
08
8 channels, 24 terminals – 20,3 ×
15,2 × 10,2 cm (8.0 × 6.0 × 4.0 in.)
08
8 channels, 24 terminals – 20,3 ×
15,2 × 10,2 cm (8.0 × 6.0 × 4.0 in.)
12
12 channels, 36 terminals – 25,4 ×
20,3 × 15,2 cm (10.0 × 8.0 × 6.0 in.)
12
12 channels, 36 terminals – 25,4 ×
20,3 × 15,2 cm (10.0 × 8.0 × 6.0 in.)
12
12 channels, 36 terminals – 25,4 ×
20,3 × 15,2 cm (10.0 × 8.0 × 6.0 in.)
16
16 channels, 48 terminals – 35,6 ×
30,5 × 20,3 cm (14.0 × 12.0 × 8.0 in.)
16
16 channels, 48 terminals – 35,6 ×
30,5 × 20,3 cm (14.0 × 12.0 × 8.0 in.)
16
16 channels, 48 terminals – 35,6 ×
30,5 × 20,3 cm (14.0 × 12.0 × 8.0 in.)
(dimensions: height × width × depth)
42
(dimensions: height × width × depth)
NEMA 4X stainless
steel junction boxes
(dimensions: height × width × depth)
BNC junction boxes
CMSS 300 series
Easy to use high quality products
The CMSS 300 series BNC junction boxes are multiple channel connecting centers for terminating the outputs of accelerometers or
other transducer field wiring. They are normally located in close
proximity to the machine to reduce wiring cost and provide convenient access to the vibration signal by a portable data collector/analyzer.
Features
• Now easier to wire! Hold it in your hand
• More room for wiring and conduit entry
• Short connections for less noise
• Large Monel screw type terminals
• Quick and convenient access to remotely installed accelerometers
with portable data collector/analyzer
• Withstands harsh factory and outdoor environments
Both internal and external switch/BNC models are available. Internal
models are provided with quick access latches and external models
with screw covers and protective caps for the BNC fitting. In harsh
environments internal models should be specified. Black and white
bezel tagging is provided for channel and switch identification.
The CMSS 300 series junction boxes are available in three versions:
• NEMA 4X Fiberglass (FG)
• NEMA 4 Powder Coated Steel (PS)
• NEMA 4X Stainless Steel (SS)
Ordering example: NEMA 4 powder coated steel BNC junction box with six channels and external BNC
would be the SKF model number CMSS 300FG-06-02.
CMSS 300FG
Ordering Information
NEMA 4X fiberglass BNC junction boxes
Description CMSS 300FG-XX-XX
The CMSS 300FG NEMA 4X fiberglass
enclosure is made of molded fiberglass
polyester and is easily punched or drilled. It
has outstanding chemical and temperature
resistance and physical properties.
A seamless foam in-place gasket assures
a water tight and dust tight seal. Screw covers are secured with captivated Monel cover
screws.
-XX
NEMA 4X fiberglass BNC junction boxes
01
1 channel – 20,3 × 18,5 × 11,2 cm (8.00 × 7.29 × 4.41 in.)
02
2 channels – 20,3 × 18,5 × 11,2 cm (8.00 × 7.29 × 4.41 in.)
04
4 channels – 20,3 × 18,5 × 11,2 cm (8.00 × 7.29 × 4.41 in.)
06
6 channels – 25,4 × 18,5 × 11,2 cm (10.00 × 7.29 × 4.41 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
43
BNC junction boxes CMSS 300 series
CMSS 300PS
Ordering Information
NEMA 4 powder coated steel BNC junction
boxes
The CMSS 300PS powder coated steel
NEMA 4 enclosure is constructed of
14 gauge mild steel and is ANSI 61 gray
polyester powder coated on the all surfaces.
CMSS 300SS
Description CMSS 300PS-XX-XX
-XX
NEMA 4 powder coated steel BNC junction boxes
01
1 channel – 19,1 × 17,8 × 10,8 cm (7.50 × 7.00 × 4.24 in.)
02
2 channels – 19,1 × 17,8 × 10,8 cm (7.50 × 7.00 × 4.24 in.)
04
4 channels – 19,1 × 17,8 × 10,8 cm (7.50 × 7.00 × 4.24 in.)
06
6 channels – 25,4 × 17,8 × 10,7 cm (10.00 × 7.00 × 4.21 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
Ordering Information
NEMA 4X stainless steel BNC junction
boxes
The CMSS 300SS NEMA 4X stainless steel
enclosure is constructed from 14 gauge 304
stainless steel.
Description CMSS 300SS-XX-XX
-XX
NEMA 4X stainless steel BNC junction boxes
01
1 channel – 19,1 × 17,8 × 10,9 cm (7.50 × 7.00 × 4.28 in.)
02
2 channels – 19,1 × 17,8 × 10,9 cm (7.50 × 7.00 × 4.28 in.)
04
4 channels – 19,1 × 17,8 × 10,9 cm (7.50 × 7.00 × 4.28 in.)
06
6 channels – 24,1 × 17,8 × 10,7 cm (9.50 × 7.00 × 4.21 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
40,7 cm
(16.01 in.)
38,5 cm
(15.14 in.)
Vibration BNC Box
Dimension example:
CMSS 300SS-06-01
44
25,4 cm
(10.0 in.)
33,9 cm
(13.34 in.)
21,5 cm
(8.47 in.)
Switchable BNC junction boxes
CMSS 310 series
Convenient, quick and safe
The CMSS 310 series switchable BNC junction boxes are designed
for terminating and switching the outputs of up to 48 accelerometers. They are installed in a location as close to the machine as practical to reduce wiring cost and yet provide convenient safe access to
the vibration signal by an operator with a portable data collector/
analyzer.
Features
• ROHS compliant
• Easier wiring, switch module (front panel) can be disconnected
from the back board
• Large Monel screw type terminals
The CMSS 310 series switchable BNC junction boxes are available in
three versions:
• NEMA 4X Fiberglass (FG)
• NEMA 4 Powder Coated Steel (PS)
• NEMA 4X Stainless Steel (SS)
Both internal and external switch/BNC models are available. Internal
models are provided with quick access latches, and external models
with screw covers and protective caps for the BNC fitting. In harsh
environments internal models should be specified. Black and white
bezel tagging is provided for channel and switch identification.
45
Switchable BNC junction boxes CMSS 310 series
CMSS 310FG
NEMA 4X fiberglass switchable BNC
junction boxes
The CMSS 310FG NEMA 4X fiberglass
enclosure is made of molded fiberglass
polyester and is easily punched or drilled. It
has outstanding chemical and temperature
resistance and physical properties.
A seamless foam in-place gasket assures
a watertight and dust-tight seal. Screw covers are secured with captivated Monel cover
screws.
CMSS 310PS
NEMA 4 powder coated steel BNC junction
boxes
The CMSS 310PS NEMA 4 powder coated
steel enclosure is constructed of 14 gauge
mild steel and is ANSI 61 gray polyester
powder coated on the all surfaces.
CMSS 310SS
NEMA 4X stainless steel BNC junction
boxes
The CMSS 310SS NEMA 4X stainless steel
enclosure is constructed from 14 gauge 304
stainless steel.
46
Ordering Information
Description CMSS 310FG-XX-XX
-XX
NEMA 4X fiberglass switchable BNC junction boxes
06
6 channels – 25,4 × 18,5 × 11,2 cm (10.00 × 7.29 × 4.41 in.)
12
12 channels – 25,4 × 18,5 × 11,2 cm (10.00 × 7.29 × 4.41 in.)
24
24 channels – 40,7 × 33,9 × 21,5 cm (16.01 × 13.34 × 8.47 in.)
32
32 channels – 45,7 × 39,0 × 21,5 cm (18.01 × 15.34 × 8.47 in.)
48
48 channels – 45,7 × 39,0 × 21,5 cm (18.01 × 15.34 × 8.47 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
Ordering Information
Description CMSS 310PS-XX-XX
-XX
NEMA 4 powder coated steel BNC junction boxes
06
6 channels – 24,1 × 17,8 × 9,6 cm (9.50 × 7.00 × 3.79 in.)
12
12 channels – 24,1 × 17,8 × 9,6 cm (9.50 × 7.00 × 3.79 in.)
24
24 channels – 39,4 × 33,1 × 21,1 cm (15.50 × 13.02 × 8.29 in.)
32
32 channels – 44,5 × 38,2 × 21,1 cm (17.50 × 15.02 × 8.29 in.)
48
48 channels – 44,5 × 38,2 × 21,1 cm (17.50 × 15.02 × 8.29 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
Ordering Information
Description CMSS 310SS-XX-XX
-XX
NEMA 4X stainless steel BNC junction boxes
06
6 channels – 24,1 × 17,8 × 10,9 cm (9.50 × 7.00 × 4.28 in.)
12
12 channels – 24,1 × 17,8 × 10,9 cm (9.50 × 7.00 × 4.28 in.)
24
24 channels – 39,4 × 33,1 × 16,0 cm (15.50 × 13.02 × 6.29 in.)
32
32 channels – 44,5 × 38,2 × 21,1 cm (17.50 × 15.02 × 8.29 in.)
48
48 channels – 44,5 × 38,2 × 21,1 cm (17.50 × 15.02 × 8.29 in.)
-XX
Internal/External BNC
01
Internal BNC
02
External BNC
(dimensions: height × width × depth)
Switchable BNC junction boxes CMSS 310 series
CMSS 261
Ordering Information
Liquid tight strain relief connectors
Description / Outer cable diameter (minimum/maximum) CMSS 261-XX
The CMSS 261 liquid tight strain relief connectors are used for either extension cable
or multi-conductor wire entries into the
CMSS 310 BNC junction boxes. Connectors
are constructed of Polyamide and provide
both environmental sealing and strain relief.
The connectors are temperature rated to
–60 to +100 °C (–40 to +210 °F) and have a
pressure rating of up to 150 PSIG. Check the
cable data sheet for the diameter of your
extension cable.
-XX
Liquid tight strain relief connectors
01
2 mm (0.08 in.) / 5 mm (0.20 in.)
02
4 mm (0.16 in.) / 8 mm (0.31 in.)
03
5 mm (0.20 in.) / 9 mm (0.35 in.)
04
7 mm (0.28 in.) / 12 mm (0.47 in.)
05
9 mm (0.35 in.) / 18 mm (0.70 in.)
06
13 mm (0.51 in.) / 20 mm (0.78 in.)
Ordering example: NEMA 4X fiberglass switchable BNC junction box with 24 channels and internal
BNC would be the SKF model number CMSS 310FG-24-01.
40,7 cm
(16.01 in.)
38,5 cm
(15.14 in.)
Vibration Switch Box
25,4 cm
(10.0 in.)
33,9 cm
(13.34 in.)
21,5 cm
(8.47 in.)
Dimension example: CMSS 310SS-24-01.
47
SKF Machine Condition Transmitter
(MCT) systems
CMSS 5301 / CMSS 5302
One and two channel, complete MCT system
The CMSS 5301 (one channel) and CMSS 5302 (two channel) are
vibration monitors that have been designed for use on typical rotating machinery such as motors, pumps, fans, turbines, compressors,
chillers, etc.
Features
The system is a pre-wired, turnkey package with power supply and
bright LED displays. The power supply accepts 110 or 220 V AC,
50 or 60 Hz. They are available in either an Imperial or Metric configuration. The standard enclosure is NEMA 4X fiberglass; powder
coated steel and stainless steel enclosures are available.
• Two levels of alarm with relays
• True “OK” circuitry with relay
• Adjustable time delays
• Trip multiply
• 4 to 20 mA output
• Buffered transducer output
• Reset button
• Bright LED digital readout
• Class I, Division 2 rated transmitters with monitors
Specifications (both models)
Physical
Description
The CMSS 5301 and CMSS 5302 accept inputs from any industry
standard 100 mV/g accelerometer, conditions the input signals and
provides a digital display and alarm status indication.
Analog outputs (4 to 20 mA) are provided for each channel for
interface to a PLC or DCS for trending, alarm and operator interface.
The alarm contacts for the OK circuit and for Alert and Danger may
be interfaced to machine control and shutdown systems for a complete vibration protection solution.
• Dimensions:
–– Fiberglass (FG), single and dual channel: 28,5 × 15,5 × 23,4 cm
(11.21 × 6.09 × 9.20 in.)
–– Powder-coated steel (PS) and stainless steel (SS), single
channel: 25,0 × 15,0 × 20,3 cm (9.84 × 5.90 × 7.98 in.)
–– Powder-coated steel (PS) and stainless steel (SS), dual channel:
30,0 × 15,0 × 25,0 cm (11.81 × 5.91 × 9.85 in.)
• The steel enclosures (PS and SS) have a slightly different design
with the door hinges on top.
Electrical
• Power: Accepts 110 or 220 V AC, 50 or 60 Hz
• Case: Isolated
Example of SKF MCT system configuration.
Data collection
and analysis with
SKF Microlog
Gearbox and fan
4 to 20 mA
(and optional
relay output)
PLC or DCS
Control system
48
Sensor
SKF Machine Condition Transmitter (MCT) systems CMSS 5301 / CMSS 5302
Input
• Sensor: Accelerometer, 100 mV/g
• Sensor OK detection: Continuously monitors the transmitter bias
and signal voltage; if this voltage exceeds preset limits, the
4 to 20 mA output current is reduced to less than 2 mA
Output
• Sensitivity: Depending on used sensor’s input sensitivity, ±10%
• 4 to 20 mA DC output: 4 to 20 mA proportional to full scale range
• Accuracy: ±5% with single pole filter; –3 dB points at 2 Hz and
2 kHz
• Buffered output: BNC connector 0 to 20 kHz
• Maximum load: 600 Ω resistive per channel
Environmental
• Operating temperature: –20 to +80 °C (–5 to +175 °F)
• Storage temperature: –55 to +125 °C (–65 to +260 °F)
• Relative humidity: 0 to 95% non-condensing
• Approvals: NEMA 4X
Ordering information
CMSS 5301: One channel complete Machine Condition Transmitter
System with display and NEMA 4X fiberglass enclosure:
• CMSS 5301FG-E: CMSS 530A100A-ER-ISOLF, 0 to 1 in./s, RMS,
universal power supply
• CMSS 5301FG-M: CMSS 530A100A-MR-ISOLF, 0 to 25 mm/s,
RMS, universal power supply
• CMSS 5301FG-ENV: CMSS 590A100A, 0 to 10 gE, universal
power supply
Enclosures are available in:
• Fiberglass NEMA 4X (standard)
• Powder coated steel NEMA 4 (CMSS 5301PS)
• Stainless steel NEMA 4X (CMSS 5301SS)
• Custom cast aluminum for explosion-proof application is available
upon request
CMSS 5302: Two channel complete Machine Condition Transmitter
System with displays and NEMA 4X fiberglass enclosure:
• CMSS 5302FG-E: Two CMSS 530A100A-ER-ISOLF, 0 to 1 in./s,
RMS, universal power supply
• CMSS 5302FG-M: Two CMSS 530A100A-MR-ISOLF,
0 to 25 mm/s, RMS, universal power supply
• CMSS 5302FG-ENV: Two CMSS 590A100A, 0 to 10 gE, universal
power supply
• CMSS 5302FG-E-ENV: One CMSS 530A100A-ER-ISOLF, one
CMSS 590A100A, universal power supply
• CMSS 5302FG-M-ENV: One CMSS 530A100A-MR-ISOLF, one
CMSS 590A100A, universal power supply
• CMSS 5302FG-E-ENV-MS: One CMSS 530A100A-ER-ISOLF,
one CMSS 590A100A, universal power supply
• CMSS 5302FG-M-ENV-MS: One CMSS 530A100A-MR-ISOLF,
one CMSS 590A100A, universal power supply
The CMSS 5301 and CMSS 5302 are also available with any other
CMSS 500 series monitor.
Example: Part ID CMSS 5302SS-E-ENV-MS: Master-slave configuration, specifies one Velocity MCT with Imperial units and one
Enveloped Acceleration MCT, configured to work with one sensor (for
dual-parameter measurements).
Ordering information
CMSS 5301 Single channel monitoring system with display
CMSS 5302 Dual channel monitoring system with displays
Part number
CMSS 530VWW–X–YYY–ZZ
V
1
2
Number of channels
Single channel
Dual channel
WW
FG
PS
SS
Enclosure
Fiberglass
Powder-coated steel
Stainless steel
X
E
M
ENV
Transmitter type
Velocity, Imperial, CMSS 530A100A-ER-ISOLF
Velocity, Metric, CMSS 530A100A-MR-ISOLF
Enveloped acceleration, CMSS 590A100A
YYY
ENV
Transmitter mix
One velocity and one enveloped acceleration
ZZ
MS
Transmitter configuration
Master and slave configuration, two transmitters, one
sensor
49
Please contact:
SKF USA Inc.
Condition Monitoring Center – San Diego
5271 Viewridge Court · San Diego, California 92123 USA
Tel: +1 858-496-3400 · Fax: +1 858 496-3531
Web: www.skf.com/cm
®SKF, @PTITUDE and MICROLOG are registered trademarks of the SKF Group.
Microsoft, Windows, Windows Mobile, Excel and Word are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Android and Nexus 7 are trademarks of Google Inc.
ASUS is a registered trademark of ASUSTek Computer.
BizPad and Tougphad are registered trademarks of Panasonic Corporation.
HTC and HTC One are trademarks of HTC Corporation.
IdeaPad is a registered trademark of Lenovo in the United States and/or other countries.
Regza is a registered trademark of Toshiba Corporation.
Loctite is a registered trademark of Henkel Corporation.
All other trademarks are the property of their respective owners.
©SKF Group 2015
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of
the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
Patents: US 4,768,380 · US 5,679,900 · US 5,845,230 · US 5,854,553 · US 5,992,237 · US 6,006,164 · US 6,199,422 · US 6,202,491 · US 6,275,781 · US 6,489,884 · US 6,513,386 · US 6,633,822 · US 6,789,025 · US 6,792,360 · WO/2003/048714 · US 5,633,811 · US 5,870,699 · US 6,437,692 · US 7,103,511 · US 7,697,492
PUB CM/P1 11704/7 EN · October 2015
skf.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement