Swift Hitch™ Camera Kit User Manual
English
Swift Hitch
TM
User's Manual
Portable Wireless Camera System
with Infrared Night Vision
Model: SH01
Please read this manual carefully and thoroughly before any attempt to
install and operate this product and retain it for your future reference.
TABLE OF CONTENTS
INTRODUCTION
Notice
Warranty
Approval Information
Restrictions
Maintenance
PRODUCT
Package Contents
Feature Locations
FIRST TIME USAGE
Charging the Camera and Receiver
Using the Camera
Night Vision
SPECIFICATIONS
TROUBLESHOOTING
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
1~3
1
1
2
3
3
4~5
4
5
6~8
6~7
7~8
8
9
10
INTRODUCTION
Thank you for purchasing this wireless camera kit. This product works
at ISM-2.4GHz frequency band, which could be legally used worldwide
without permission. We feel confident that you will be pleased with the
quality and features of this product. The camera features one CMOS
image sensor and a transmitting module to capture the image and
transmit them wirelessly.
The receiver features a receiving module to receive and display the
camera image on a color (LCD) - liquid crystal display.
Notice
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products. But its transmitting power is less than
other wireless products such as mobile phones. The 2.4GHz wireless
camera meets wireless frequency security standards and recommended
indexes while working. These standards and indexes are certificated
by academic organization and represent the cogitative research of the
scientific workers who continuously explore and annotate the involved
fields. So we believe that our products are safe for customers.
Warranty
This product has a one year limited warranty with an affective date
that begins the date of purchase. Refer to the troubleshooting guide at
the end of this manual for help. Contact the phone number provided in
that section for any additional support. Please retain proof of purchase
receipt for verification. Any attempted disassembly of the product will
void the warranty. Do not return defective product to the retailer.
1
Approval Information
All our products meet the requirements of approval FCC , and are
granted the FCC certification. They are authorized to bear FCC mark.
FCC
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation Changes and
modification not expressly approved by the manufacturer or
registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commissions rules.
2
Restrictions
1. DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purpose;
2. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 foot away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
3. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
user.
Maintenance
1. Do not shake or strike the product;
2. Keep it dry and dustless and avoid exposing it to direct sunlight;
3. Avoid putting the product in places where the constantly changed
temperature or humidity occurs;
4. Keep product away from heat sources such as electric heater;
5. Do not use the camera near caustic chemicals;
6. Do not use this camera near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool and the like;
7. Do not use the camera in the places which are enclosed by metal.
The surrounding metal like lifter, cabin, may shield the
electromagnetic wave, and result in failure of signal reception;
8. Please obey the local government's environment protection policy;
9. Please turn off the power when left unused;
10. Do not disassemble or repair the camera or receiver; doing so might
cause damages to the product, and also VOID THE WARRANTY.
3
PRODUCT
Package Contents
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
① 2.4GHz Wireless Camera ×1
② Weatherproof cover for Camera ×1
③ 2.4GHz Wireless Receiver ×1
④ Lithium Battery for Receiver ×1
①
②
③
④
⑤
⑥
⑦
⑧
⑤ "Y" shaped Charging Cable for
Camera & Receiver ×1
⑥ Carrying Bag for Camera ×1
⑦ Carrying Bag for Receiver ×1
⑧ User's Manual ×1
4
Feature Locations
1. Camera
Antenna
Power Jack
LED
Weatherproof
Cover
Infrared
Lights
Power ON/OFF
Lens
Magnetic
Stand
2. Receiver
LCD
Power ON/OFF
LED
Charge Socket
5
Battery Cover
FIRST TIME USAGE
Charging the Camera and Receiver
1. Load a Li-battery to the battery compartment with its polarities matched.
2. Connect the camera/receiver with auto cigarette lighter by the "Y"
shaped charging cable. Your camera and receiver are being
charged. A full charge will take about 2.5 hours for camera and for
receiver respectively.
Camera
Auto cigarette lighter
Receiver
Note: For camera, you need to remove the cover before charging.
3. The camera can work during charging. Press the Power ON/OFF
button to power on (or turn off) the camera, then you can use it.
Camera
4. The receiver can also work during charging. Press and hold the
Power ON/OFF button for about three seconds to turn on/off the
receiver. When the receiver is powered on, LCD displays reverse
the image by default. Pressing POWER ON/OFF button momentarily
can switch between reverse and non reverse image.
6
Receiver
Notes for camera:
If the battery is exhausted, please recharge it with the charging cable.
Always keep weatherproof cover fitted regardless of conditions.
CAMERA LED INDICATOR
Red on
Off
Green on
Yellow on
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/Finish Charging
Power on
Charging when Power on
Notes for receiver:
A full charge will take about 2.5 hours, which can power the receiver for about
4 hours continuously.
You are recommended to have the battery fully charged before its first
installation to optimize its life.
Do not burn or disassemble the Li-battery.
Do not short-circuit the battery as it may cause fire or electric shock.
RECEIVER LED INDICATOR
Red on
Off
Green on
Yellow on
Green flash
Yellow flash
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/ Finish Charging
Power on, working at reverse image
Charging when Power on, working at reverse image
Working at non reverse image
Charging and working at non reverse image
Using the Camera
1. Before using, make sure the camera is fully charged. Press the
Power ON/OFF button to power on your camera.
7
2. Mount the Magnetic Camera on your tailgate, then adjust it to a
suitable angle.
3. Watching the back view of the car via the LCD display. Hitch your ride.
Night Vision
The built-in Infra-red lights in camera provide night vision for low light
conditions. The Infra-red lights will be automatically activated at night.
The picture will turn to Black & White (monochrome) in Night Vision
status.
Built-in IR lights for about
15ft Night Vision Range
8
SPECIFICATIONS
CAMERA
ITEMS
Imaging Sensor
CMOS Total Pixels
View Angle
Value
CMOS
510*492(NTSC)
55o
5Lux/F1.2 & 0Lux (IR ON)
ISM 2,400MHz~2,483MHz
10mW/CE
Minimum Illumination
Transmission Frequency
Transmission Power
Modulation Type
FM
18MHz
+12V DC
Lithium Battery
180mA & 230mA (IR ON)
Bandwidth
Power Supply
Battery Type
Consumption Current
Charging Current
330mA
2.5h
RECEIVER
Charge Time
Working Time
Unobstructed Effective Range
Night Vision Range
3.5h(IR OFF)/2h(IR ON)
100m
5m
Dimensions(W*D*H)
Weight
28*90*28(mm)(Excluding bracket)
110g
LCD
LCD Resolution
Receiving Frequency
2.5" TFT
960*240 dots
ISM 2,400MHz~2,483MHz
Intermediate Frequency
Demodulation Type
480MHz
FM
Receiving Sensitivity
Power Supply
≤ -80dBm
+12V DC
Consumption Current
Charge Time
310mA (Max.)
Working Time
Dimensions(W*D*H)
4h
80*38*130(mm)
2.5h
Weight
250g
o
Operating Temperature
Storage Temperature
Operating Humidity
o
o
o
-10 C~+50 C/+14 F~+122 F
o
o
o
o
-30 C~+65 C/-22 F~+149 F
85%RH
* Actual transmission range may vary according to weather, location, interference or building
construction.
* All the specifications are subject to minor change without prior notice.
9
TROUBLESHOOTING
When you experience the operation problems, please check and try
the following yourself before claiming that it is the defective product
or consulting the experienced technician.
Abnormal Phenomena
Possible Reasons/Solutions
Check whether the camera/receiver is
connected to power supply and powered on.
No image
Check the distance & blocks.
Snowflakes
on image
1. Interfered with other devices;
Ghost image
2. Check the distance & blocks.
Interfered with other devices nearby;
Remove or turn off such devices.
Normal image
Questions?? Call (603)-319-4909
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement