Schneider Electric Actassi Instruction Sheet

CABLING INSTRUCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Front View
* Important: Install the cable terminated RJ45 modules to panel before mounting the
panel to Rack.
1. Finish cable termination on each RJ45 modules.
2. Place the cable assembled RJ45 modules from back of panel.
1
2
2
Cable Tie(If provided)
1
Solid Cable
Grounding Wire
23
3. Snap in the RJ45 modules into the panel
until all RJ45 modules are installed.
Port designation paper with clear
cover provides clean and clear
port identification.
21
22
46
45
20
18
17
41
19
43
44
42
16
14
13
15
39
40
38
37
10
9
11
35
12
36
34
33
8
32
7
31
6
30
5
29
4
3
2
1
28
Write on description label
protected by clear plastic cover.
27
26
25
Clear Plastic Cover
Creation
Printed on 2020/06/17
47
24
48
4. Expand the Foldable Wire Management Grip,
hook the grips on fixture at both ends of the
patch panel.
Wire Management Bar
Fixture
Foldable Wire
Management Grip
5. Fix the Solid Cables on wire
Management Bar by Cable Ties.
Cable Tie
2
Dismounting
3
1
3
2
1
Creation
Printed on 2020/06/17
3
1
2

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project