APPLICATION GUIDE
Socket
Thank you for choosing Schneider Electric
TM products. To ensure proper application of our product, please read through the following information before installation and use.
Rated Voltage
Mounting centre
SPECIFICATIONS
:250V~ Rated Current
:60.3/120.6mm
: Refer to product
IMPORTANT NOTE
1. The product must be installed by a qualified electrician.
2. Please check your local wiring regulations before installation.
3. Please install with standard wall box to aid correct operation of the product.
4. Please keep the front cover safe in order to prevent damages before and during installation.
5. Turn off the power supply when cleaning the product. Use a piece of soft and dry cloth to wipe off the dirt and contamination on the surface. Do NOT use corrosive chemicals.
6. Shield / mask the product before renovation to avoid contamination and degradation.
2 Pin Socket
Live
Neutral
L N
WIRING DIAGRAMS
3 Pin Socket
Earth
Live
Neutral
L N
MOUNTING INSTRUCTION
1. Connect the wires to the terminals (recommend to leave 10-12mm bare metal wire) and tighten the terminal screws.
2. Screw the grid plate onto the wall box.
3. Snap the product cover.
Mounting
Screw
Grid Plate
Wall Box
Product cover
*Picture is for reference only
