Installation Sheet PHA5816001-01 / 02-20016-03-en, May 2019 | 1
MP-C Display
SmartX Controller
Regulatory Compliance and Safety Information
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by
Schneider Electric for any consequences arising out of the use of this material.
Read these instructions and all information relevant for this product carefully before trying to install it. See the list of technical literature.
The technical literature and declarations of conformity can be accessed on the Schneider Electric Exchange website, ecobuilding.schneiderelectric.com. Contact your local Schneider Electric sales office for hard copy of documentation or for additional information.
Technical Literature
• SmartX Controller - Hardware Reference Guide, 04-XX001-XX-en
Dimensions
Installing the Module
Part Numbers
MP-C DISPLAY SXWMPCDSP10001
PHA5816001-01 / 02-20016-03-en, May 2019 | 2
Specifications
DC input max. 0.15 W (45 mA at 3.3 V)
Operation environment
-30 to +60 °C (-22 to +140 °F)
Maximum 95 % RH non-condensing
Mechanical
UL94-5VB
0.035 kg (0.077 lb)
Regulatory compliance
FCC CFR 47 Part 15 Class B, ICES-003
Class B, RCM, CE - EMCD 2014/30/EU,
WEEE 2012/19/EU, RoHS 2011/65/EU and
2015/863/EU, China RoHS SJ/T 11364-2014,
UL 916 Listed products for the United States and Canada, Energy Management
Equipment Accessory (UL file E80146.)
Addendum - California Proposition 65 Warning Statement for California Residents
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
© 2019 Schneider Electric. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
www.schneider-electric.com/buildings
