Schneider Electric Sedna - Connected Single Socket Outlet 16A - Device User Guide
Add to My manuals26 Pages
Schneider Electric Sedna - Connected Single Socket Outlet 16A - Device allows you to conveniently control and manage electrical devices plugged into it. It is equipped with remote control functionality, enabling you to switch the socket on or off using a mobile app. The device also provides energy consumption monitoring, so you can track how much electricity your connected devices are using and optimize energy usage accordingly. Additionally, you can create schedules to automatically turn the socket on or off at specific times, ensuring convenience and energy efficiency.
advertisement
Sedna - Connected Single Socket Outlet 16A
Device user guide
Information about features and functionality of the devices
03/2022
www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of
Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.
Table of Contents
Safety information
.......................................................................................5
Sedna - Connected Single Socket Outlet 16 A
.......................................6
Pairing device manually.........................................................................7
Pairing device with auto scan.................................................................9
Changing the device icon ....................................................................10
Renaming the device ..........................................................................10
Changing the device location ............................................................... 11
Switching On/Off the device manually...................................................13
Switching On/Off the device using app..................................................13
Creating a schedule ............................................................................14
Checking the energy consumption .......................................................14
Selecting LED indicator mode ..............................................................15
Creating a moment .............................................................................15
Creating an automation .......................................................................18
DUG_Sedna_SSO_00 3
Safety information
Important information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
DUG_Sedna_SSO_00 5
Sedna - Connected Single Socket Outlet 16 A
Sedna - Connected Single Socket Outlet 16 A
SDD11xx370
6
SDD11xx380
For your safety
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried out only by skilled professionals.
Skilled professionals must prove profound knowledge in the following areas:
- Connecting to installation networks.
- Connecting several electrical devices.
- Laying electric cables.
- Safety standards, local wiring rules and regulations.
Failure to follow these instructions will result in death or serious injury.
About the device
The Connected Single Socket Outlet 16A (hereinafter referred to as Socket
Outlet ) is a connected electrical outlet designed to manage and control electrical devices in a convenient and efficient manner. You can remotely control and monitor the energy consumption of the plugged-in load.
The Socket outlet is equipped with a temperature protection mechanism. When the Socket outlet is used with a high load over a long time, the mechanism can switch off the Socket outlet, ensuring overheat protection.
The Socket outlet is equipped with an overload protection mechanism. When the
Socket outlet is used with a high load (18 A and high), the mechanism can switch off the Socket outlet, ensuring overload protection.
DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
NOTE:
• Do not connect any devices that depend on a permanent power supply
• Do not mix different load types in the controlled socket
• Do not use multi-sockets in the controlled socket
• Do not use for EV charging
Operating elements
A: Push button with status LED
A
Installing the device
Refer to the installation instruction supplied with this product.
See Sedna - Connected Single Socket Outlet 16A
Pairing the device
Using the Wiser app, first pair your device with the Wiser Gateway to access and control the device. You can either add the device manually or do an auto-scan to pair it.
NOTE: The Socket Outlet shows a non-zero energy consumption value when the device is added to the app if the Socket Outlet was in ON state with a load connected before pairing it to the Wiser Gateway .
Pairing device manually
Follow the steps to pair the device manually:
1. On Home page, tap + icon.
2. Tap icon and select the Wiser Hub .
DUG_Sedna_SSO_00 7
Sedna - Connected Single Socket Outlet 16 A
3. Select any one of the options to add device (A):
– Add Device with Install Code
– Add Device without Install Code
Add Device
Install Code is Recommended
To enhance network security, we strongly recommend using Install Code to add a device.
If you are unable to scan or type the Install
Code, you can still add the device without it.
Add Device with Install Code
Add Device without Install Code
A
4. To add the device with Install Code, tap Add Device with Install Code button to open the slide-up menu. Select any one of the options (B):
– Scan Install Code - You can scan the device for the Install Code
– Enter Install Code Manually - You can manually enter the install code from the device
After adding the device with Install Code, proceed to Step 6 .
8
B
Enter Install Code Manually
Cancel
TIP: It is recommended to add the device with Install Code for security purpose.
5. To add the device without Install Code, tap Add Device without Install
Code .
6. Short press the push button 3 times (< 0,5 s) on the device.
3× < 0,5 s
The LED blinks amber.
DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
7. In the app, select Confirm that the LED is blinking amber and tap Start configuration (C).
Cancel
How to pair device
Short-press the push button for 3 times.
amber.
C
The app displays the progress of connecting the device.
8. Wait for a few seconds until the device is connected and the app shows that the device is added successfully.
The stable green LED on the socket outlet shows that it is successfully connected to the Gateway .
9. After the device is added in the app, tap Done .
Pairing device with auto scan
Pairing the device with auto scan automatically discovers the device when the corresponding device is powered on.
Follow the steps to pair the device:
1. On the Home page, tap + icon.
2. Tap Auto scan tab and tap Confirm .
3. If you have multiple gateways, do Step 4 or proceed to Step 5.
4. Tap Select hub and select the Wiser hub from the slide-up menu.
5. Short press the push button 3 times (< 0,5 s).
NOTE:
• The LED blinks amber.
• Wait for a few seconds until the device search is complete.
DUG_Sedna_SSO_00 9
Sedna - Connected Single Socket Outlet 16 A
6. Tap Connected Single Socket Outlet 16A and tap Next (A).
Auto Scan
Next
A
7. Once the device is added successfully, tap Done .
Configuring the device
Changing the device icon
Using the Wiser app, you can change the icon of the device.
Follow the steps to change the device icon:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. Tap icon and tap .
3. Tap Icon to view the menu.
4. In the slide-up menu, select any one of the following (A):
– Take photo - Allows you to take a photo from the mobile camera
– Select from Icon Library - Allows you to select an icon from the app library
– Select from Album - Allows you to select photo from the mobile gallery
A
5. Tap on the required photo/icon to change the icon.
Renaming the device
Using the Wiser app, you can rename your device for easy identification.
Follow the steps to rename the device:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
10 DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
2. Tap icon and tap .
3. Tap Name , enter the name (A) and tap Save .
A
Rename
Cancel Save
Changing the device location
Using the Wiser app, you can change the location of the device.
Follow the steps to change the device location:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. Tap icon and tap .
3. Tap Location , select any location from the list (A) and tap Save .
Device location Save
A
Kitchen
Removing the device
Using the Wiser app, you can remove a device from the device list.
Follow the steps to remove the device:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. Tap icon to display more details.
DUG_Sedna_SSO_00 11
Sedna - Connected Single Socket Outlet 16 A
3. Tap Remove and Factory Reset Device (A).
More
Connected Single Socket
Outlet
Moment and Automation
Add to home Screen
A
TIP: Alternatively, you can long tap on the Connected Single Socket
Outlet on the Home page to remove the device.
NOTE: By removing the device, you will reset the device. If you still have a problem with the reset, then refer to
Resetting the device
You can reset the device to factory default manually.
Follow the steps to reset the device:
1. Short press the push button three times (< 0.5 s) and then long press the push button once (>10 s).
2. After 10 s, LED starts blinking red then release the push button.
The LED stops blinking upon successful reset of the device.
3. The Socket Outlet restarts and blinks green for a few seconds.
NOTE: After reset, the LED turns amber, indicating that the socket is ready for pairing.
3 X < 0,5 s + 1x > 10 s
Using the device
The Control Panel allows you to switch the Socket Outlet On and Off and monitor the energy consumption.
On the Home page, tap All devices > Connected Single Socket Outlet to access the control panel.
On the Socket Outlet control panel page, you can see the following:
• Power (W) - The load value of the device connected to the Socket Outlet (A)
12 DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
• Day (kWh) - The total energy consumption of the device connected to the
Socket Outlet per day (B)
NOTE: The total energy consumption per day value will automatically reset to zero at 00:00 hrs everyday.
• The current state of the Socket Outlet (C)
•
(D)
•
(E)
•
(F)
Connected Single Socket Outlet
A
Power(W)
4.00
Day(kWh)
0.00
B
C
On
D
E
F
Consumption
Switching On/Off the device manually
You can switch On/Off the Socket Outlet manually. The Socket Outlet will provide power to the electrical appliance connected to it.
Short press the push button on the device once to switch On/Off the Socket
Outlet.
< 0.5 s
Switching On/Off the device using app
By using the Wiser app, you can switch On/Off the device.
Follow the steps to switch the device On/Off:
1. On the Home page, tap the power button (A) to switch On/Off the Socket
Outlet.
My Home
Welcome Home
A
All Devices • • •
DUG_Sedna_SSO_00 13
Sedna - Connected Single Socket Outlet 16 A
2. Alternatively, you can navigate to the
of the device and tap icon to switch On/Off the Socket Outlet.
NOTE: The control panel shows the current state of the Socket Outlet.
Creating a schedule
The Socket Outlet can be controlled and triggered by a schedule. Once the schedule is set, your system will follow the active schedule. You can create or modify the schedules at any time.
Follow the steps to create a schedule:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. Tap Schedule > Add schedule to add a schedule.
3. Set the time (A).
4. Tap Repeat (B) to select the days you want to set the schedule.
5. Tap Note (C), enter the note and tap Confirm .
6. Tap the toggle switch (D) to turn On the Notification for the schedule. The app will send a notification that the scheduled task is executed at the time of schedule.
7. Tap Socket (E) and select one of the options:
– On - Turns On the Socket Outlet on the scheduled time
– Off - Turns Off the Socket Outlet on the scheduled time
Add Schedule Save
A
19 20
20 21
21 22
B
C
Repeat
Note
D
E
8. Tap Save .
Checking the energy consumption
Using the Wiser app, you can monitor the energy consumption of the load connected to the device by accessing the consumption feature.
TIP: You can see the daily real-time energy consumption value of the load connected to the device on the
of the device.
Follow the steps to see the device energy consumption history:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. On the device control panel page, tap Consumption .
14 DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
3. In the Consumption page, you can see the total energy consumption and it’s changes in Week (A), Month (B), and Year (C) view in the graph.
You can tap each bar on the graph to see the total energy consumed on a particular day/month.
A
Consumption
Weeks Month Year
B
Consumption
Weeks Month Year
Consumption
Weeks Month Year
C kWh
0.8
kWh
0.8
kWh
80
0.4
0.4
40
0
Mon Tue Wed Thu Fri Sat Sun
0
08 22
0
J F M A M J J A S
Months
N
Selecting LED indicator mode
Using the Wiser app, you can select the LED indicator mode for easy identification of the device status.
Follow the steps to set the LED indicator modes:
1. On the Home page, tap All devices > Connected Single Socket Outlet .
2. On the device control panel page, tap Settings .
3. Tap LED Indicator Mode (A) and select any one of the following:
– Reverse With Load - The LED on the Socket Outlet is On when the device is Off
– Consistent With Load - The LED on the Socket Outlet is On when the device is On
– Always Off - The LED on the Socket Outlet is always Off
– Always On - The LED on the Socket Outlet is always On
A
For information on LED color during each modes, refer to
.
Creating a moment
A Moment allows you to group multiple actions that are usually done together.
Using the Wiser app, you can create moments based on your needs (such as movie night).
Follow the steps to create a moment:
DUG_Sedna_SSO_00 15
16
Sedna - Connected Single Socket Outlet 16 A
1. On the Home page, tap icon.
2. Go to Moment > + icon to create a moment.
3. Tap Edit name , enter the name of the moment (A) and tap Save .
TIP : You can choose the cover image that best represents your moment by tapping icon.
Edit Name
A
Edit Name
Cancel Save
4. In the Action section, tap Add task (B) to open the slide-up menu.
5. In the Add task menu, you can do either or all of the following actions (C):
– Run the device - Select the devices that you want in a moment
– Select Automation - Select the automation that you want to enable or disable. Refer to
Creating an automation, page 18
– Delay - Set the delay time
NOTE : You can add one or more actions using icon.
Edit Name
B
Add task
C
DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
6. Tap Run the device > Connected Single Socket Outlet > Socket to select either or all of the functions to add in the moment:
– On - Switch On the Socket Outlet (D)
– Off - Switch Off the Socket Outlet (E)
– Reverse Switch - Toggle the last state of the Socket Outlet (F)
D
E
F
Reverse Switch
Save
7. Once all the actions are set, tap Save .
Cancel Moment Settings Save
My Moments
Action
Show on Home Page
Editing a moment
Follow the steps to edit a moment:
1. On the Moment tab, locate the moment you want to edit and tap icon.
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, etc.) to change the settings and tap Save .
Save Cancel
My Moments
Edit
Action
Show on Home Page
Delete
DUG_Sedna_SSO_00 17
Sedna - Connected Single Socket Outlet 16 A
Deleting a moment
Follow the steps to delete a moment:
1. On the Moment tab, locate the moment that you want to delete and tap icon.
2. Tap Delete (A).
Cancel
My Moments
Edit Save
Action
Show on Home Page
Delete
A
Creating an automation
An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs.
Follow the steps to create an automation:
1. On the Home page, tap the icon.
2. Go to Automation > + icon to create an automation.
3. Tap Edit name , enter the name of the automation (A) and tap Save .
TIP : You can choose the cover image that best represents your automation by tapping icon.
My Automation
A
Edit Name
Cancel Save
18 DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
4. Tap Any condition is met to select any one of the condition type (B):
– All conditions are met - The automation is triggered when all the conditions are met
– Any condition is met - The automation is triggered when at least one condition is met
My Automation
B
Select Condition type
All Conditions are met
Any condition is met
Cancel
5. Tap Add Condition to open the slide-up menu.
6. In the Add Condition menu, you can do either or all of the following options
(C):
– When weather changes - Select the various weather settings
– Schedule - Set the time and day
– When device status changes - Select the device and it’s function
Note: You can add one or more conditions using icon.
My Automation
C
Add Condition
When weather changes
Schedule
When device status changes
DUG_Sedna_SSO_00 19
20
Sedna - Connected Single Socket Outlet 16 A
7. Tap When device status changes > Connected Single Socket Outlet and select either or all the functions:
– Socket - Turn On/Off the Socket Outlet (D)
– Power (W) - The real-time load value of the connected device (E)
– Daily Consumption (kWh) - The total energy consumption value daily (E)
– Monthly Consumption (kWh) - The total energy consumption value monthly (F)
Select Function
D
E
F
G
Socket
Power
Daily Consumption
Monthly Consumption
8. Tap Add task to open the slide-up menu.
9. In the Add task menu, you can do either or all of the following options (G):
– Run the device - Select the devices that you want to be triggered
– Moment or Automation - Select the moment which you want to trigger or select the automation that you want to enable or disable
– Send notification - Turn On notification for the automation
– Delay - Set the delay time
NOTE : You can add one or more actions using icon.
My Automation
Add Task
Add task
Run the device
Moment or Automation
Delay
H
DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
10. Tap on Effective period to set the time range for the automation. You can select any one of the following (H):
– All-day - 24 hours
– Daytime - From sunrise to sunset
– Night - From sunset to sunrise
– Custom - User defined time period
Next
City
24 hours
From sunrise to sunset
I
From sunset to sunrise
Custom
Repeat
11. Once all the actions and conditions are set, tap Save .
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable it.
Example of an automation
This demonstration shows you how to create an automation to get notification on your app when the total energy consumption value of the Socket Outlet is 50 kWh.
1. Go to Automation > + icon to create an automation.
2. Tap Edit name , enter the name of the automation and tap Save .
TIP : You can choose the cover image that best represents your automation by tapping icon.
3. Tap Add Condition > When device status changes > Connected Single
Socket Outlet .
4. Tap Consumption , select the total energy consumption value (A) and the condition (B) and tap Next .
TIP: You can set the energy consumption value as 50 kWh and the condition as = (equal to).
Consumption (kWh) Next
B
9 9 9 4 9 9 kWh
1 1 1 6 1 1
A
DUG_Sedna_SSO_00
5. Tap Add task > Send notification and select Notifications (C).
21
6. Tap Next .
Select Notifi cation Method
Next
Multiple items Selectable
C
Notifi cations
Sedna - Connected Single Socket Outlet 16 A
22
7. In the Automation Settings page, tap Save .
Cancel Automation Settings Save
My Automation
Any Condition Is Met
Action
All-Day
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable it.
Push notification will appear on the screen when the automation is triggered. You can also tap on icon to access the notification history.
Editing an automation
Follow the steps to edit an automation:
1. On the Automation tab, locate the automation you want to edit and tap icon.
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, etc.) to change the settings and tap Save .
Cancel Edit Save
My Automation
Any Condition Is Met
Action
All-Day
Delete
DUG_Sedna_SSO_00
Sedna - Connected Single Socket Outlet 16 A
Deleting an automation
Follow the steps to delete an automation:
1. On the Automation tab, locate the automation you want to delete and tap icon.
2. Tap Delete (A).
Cancel Edit Save
My Automation
Any Condition Is Met
Action
Delete
All-Day
A
LED Indication
Pairing
User Action
Press the push-button 3 times
LED Indication
LED blinks amber per second.
Resetting
User Action
Press the push-button 3 times and hold it down once for > 10 s.
LED Indication
After 10 s, the LED blinks red.
Status
Pairing mode is active for 30 seconds.
When pairing is completed, LED glows green for some time before turning Off.
Status
The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED blinks green for a few seconds and then stays amber.
LED Indicator Mode/Backlight Mode
Load Status ON
Reverse with load No LED
Consistent with load
Always Off
Always On
No LED
OFF
No LED
No LED
DUG_Sedna_SSO_00 23
Sedna - Connected Single Socket Outlet 16 A
Troubleshooting
Symptom
The Socket Outlet is not turning ON.
When there is an alarm, the user cannot switch ON the output locally or remotely.
LED blinks fast RED.
Possible cause
The Socket Outlet is broken or it could be an alarm if the LED blinks red.
Clear the Socket Outlet alarms.
Solution
First, power cycle the Socket Outlet and check if it works afterwards. If it is still not working, you can replace the Socket Outlet.
To clear the alarm, press and hold the push button for 4 seconds. After 4 seconds, the blinking will stop and the alarm will be cleared.
You can use the Socket Outlet again.
NOTE: Before clearing the alarm, you must make sure to take care of the reason why
Overcurrent/Temperature happened, for safety.
Technical Data
Nominal voltage
Nominal power
AC 230 V ~, 50 Hz
Load type Load name
LED
LED
Motor
Load value
100 W, 125 μF
1600 VA, max. 7 A
Iron core transformer 1500 VA
Standby
Fuse protection
Connecting terminals
Operating frequency
Max. radio-frequency power transmitted
IP rating
Measuring accuracy
Communication protocol
R
Incandescent lamp 2000 W
Electronic step-down converter 2000 VA
Ohmic load
Capacitive load
C
Inductive load
L
Maximum 0.4 W
16 A miniature circuit breaker
Terminals for max. 2x 2.5 mm²
2405 - 2480 MHz
< 10 mW
IP20
± 1% for loads > 25 W
Zigbee 3.0 certified
3680 W
6 AX, max. 70 μF
16 A, cosφ = 0.6
24 DUG_Sedna_SSO_00
Compliance
Compliance information for Green Premium products
Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product
Environmental Profile (PEP) and End-of-Life instructions (EOLI).
General information about Green Premium products
Click the link below to read about Schneider Electric’s Green Premium product strategy.
https://www.schneider-electric.com/en/work/support/green-premium/
Find compliance information for a Green Premium product
Click the link below to search for a product’s compliance information (RoHS, REACH,
PEP and EOLI).
NOTE: You will need the product reference number or product range to perform the search.
https://www.reach.schneider-electric.com/CheckProduct.aspx?cskey= ot7n66yt63o1xblflyfj
Trademarks
This guide makes reference to system and brand names that are trademarks of their relevant owners.
• Zigbee ® is a registered trademark of the Connectivity Standards Alliance.
• Apple ® and App Store ® are brand names or registered trademarks of Apple Inc.
• Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.
• Wi-Fi ® is a registered trademark of Wi-Fi Alliance ® .
• Wiser™ is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.
Other brands and registered trademarks are the property of their respective owners.
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison
France
+ 33 (0) 1 41 29 70 00 www.se.com
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2022 – Schneider Electric . All rights reserved.
DUG_Sedna_SSO_00
advertisement