Shanghai Joinwit Optoelectronic Co.,Ltd. Product Catalogue

Shanghai Joinwit Optoelectronic Co.,Ltd. Product Catalogue
Expert on Test & Measurement
Passive Components
Shanghai Joinwit Optoelectronic Co.,Ltd.
Product Catalogue
Expert on Test & Measurement
Passive Components
New in 2010
Handheld Optical Power Meter---------JW3216 Series
JW3216 Handheld Optical Power Meter is Joinwit newly designed fiber optic tester, it aims at fiber network installation, fiber
network engineering acceptance and fiber network maintenance. Combined usage with JW3116 handheld optical light source, it
offers a quick and accurate testing solution on both SM and MM fibers. Compared with usual power meters, the JW3216 has
more great functions/features of automatic wavelength identification and switching and intelligent backlight control. Also the
JW3216 features good appearance, good touch feeling and considerate humanity design.
Features










Wave ID—Automatic wavelength identification and switching (when used
with JW3116 handheld light source)
Frequency ID/Tone detection---Automatic frequency identification
Intelligent backlight control (light intensity can be adjusted properly according
to ambient light, which greatly reduced power consumption)
Data storage function, up to 1000 test records
USB communication port for saved testing records download
Reference power level can be set up and stored
User self calibration function
Auto-off function can be activated or deactivated.
AA alkaline and AC adapter for power supply
Low battery indication
Specifications
Model
JW3216A
Calibrated(nm)
JW3216C
850, 1300,1310,1490,1550,1625
Detector type
InGaAs
Measurement Range(dBm)
Uncertainty (dB)
-70~+6
-50~+26
±0.15(3.5%)
linearity (dB)
±0.02
Display resolution(dB)
0.01
Frequency ID(Hz)
270,330,1K,2K
Wave ID(nm)
1310,1490,1550,1625
Date storage capacity
1000
Communication Port
USB
Optical Connector type
FC,SC,ST interchangeable
Alkaline battery
3*AA,1.5V
Power Supply Adaptor(V)
8.4
Battery Operating time (h)
200
Operation Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Outline size(mm)/weight
180*90*45(250g)
Standard Packages
MODEL
INCLUDES
All JW3216 Models
JW3216 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs
and Soft carrying case.
-1-
Optical Power Meter---------JW3211 Series
Expert on Test & Measurement
Passive Components
JW3211 optical power meter
Is a handheld optical power meter, newly released in 2007, which can be used for absolute optical power measurements as well as for
relative loss measurements in optic fiber networks. An Ø1.0mm photosensitive area photodiode is used to significantly improve the
stability and the reliability. It features ingenious appearance, wide range of power measurement, high accuracy, user self-calibration
function and reference power level storage.
Features

Wide dynamic measurement range (up to 80dB)

Reference power level storage(Ref Setting)

User self-calibration function

Comfortable LCD display and backlight LCD display supports
night operation.

Power measurements in dBm or mw and insertion loss in dB

10 minutes Auto-off function can be activated or deactivated.

AA alkaline batteries can last more than 140 hours, AC
adaptor also available

Low battery indication
Applications
Telecom Maintenance
CATV Maintenance
Fiber Optic lab testing
Other Fiber Optic Measurements
Specifications
MODEL
JW3211A
JW3211C
Wavelength(nm)
800~1700nm
Detector Type
InGaAs
Detector Size
Ø 1.0mm
Measurement Range (dBm)
-70~+10
Uncertainty
-50~+30
±5%
Calibrated Wavelength(nm)
850,1300,1310,1490,1550,1625
Resolution(dB)
0.01
Optical Connector
FC(interchangeable SC,ST) / as well as 2.5mm universal
Power Supply
Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)
Battery Operating Time
140 h with 1.5V Battery(3pcs)
Operating Temperature(℃)
-10 ~ +60
Storage Temperature(℃)
-25 ~ +70
Relative Humidity
0 to 95% (non-condensing)
Dimension(mm)
190X100X50
Weight(g)
370
Standard Packages
MODEL
INCLUDES
All JW3211 Models
JW3211 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton swabs
and Soft carrying case.
-2-
Optical Power Meter---------JW3208 Series
Expert on Test & Measurement
Passive Components
JW3208 handheld optical power meter
is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power
measurements as well as for relative loss measurements in optical fibers. It features ingenious appearance, wide range of power
measurement, high accuracy and user self-calibration function with high performance-to-price ratio.
Features

User self calibration function

Comfortable LCD display and optional backlight LCD display supports
night operation

Power measurements in dBm or mw and insertion loss in dB

Low battery consumption, more than 240 hours continual operation time
for three 1.5V alkaline batteries

10 minutes Auto-off function can be activated or deactivated.
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3208A
Wavelength(nm)
JW3208C
800~1700nm
Detector
InGaAs
Measurement Range (dBm)
-70~+3
Uncertainty
-50~+26
±5%
Calibrated Wavelength(nm)
850,980,1300,1310,1490,1550
Resolution(dB)
0.01
Optical Connector
FC(interchangeable SC,ST) / as well as 2.5mm universal
Power Supply
Alkaline Battery(3 AA 1.5V batteries)
Battery Operating Time
240 h with 1.5V Battery(3)
Operating Temperature(℃)
-10 ~ +60
Storage Temperature(℃)
-25 ~ +70
Relative Humidity
0 to 95% (non-condensing)
Dimension(mm)
175x82x33
Weight(g)
310
Standard Packages
MODEL
INCLUDES
All JW3208 Models
JW3208 Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, User Manual,
Cotton swabs and Soft carrying case.
-3-
Optical Power Meter---------JW3218 Series
Expert on Test & Measurement
Passive Components
JW3218 handheld optical power meter
A easy and simple optical power meter. Very economic. Have 6 calibration wavelengths. Nice feature and easy to operate.
Features

Low battery indication

More economic

Long battery consumption 260hours
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3218A
Wavelength(nm)
JW3218C
800~1700nm
Calibration Wavelength
850, 1300,1310,1490,1550,1625
Detector
InGaAs
Measurement Range (dBm)
-70~+6
-50~+26
Uncertainty(dB)
±0.22
Linearity(dB)
0.03
Resolution(dB)
0.01
Optical Connector
FC(interchangeable SC,ST) / as well as 2.5mm universal
Power Supply
Alkaline Battery(3 AA A1.5V batteries)
Battery Operating Time
260 h with 1.5V Battery(3)
Operating Temperature(℃)
-10 ~ +60
Storage Temperature(℃)
-25 ~ +70
Dimension(mm)
164x78x35
Weight(g)
260
Standard Packages
MODEL
INCLUDES
All JW3218 Models
JW3218 Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, User Manual,
Cotton swabs and Soft carrying case.
-4-
Expert on Test & Measurement
Passive Components
Optical Power Meter---------JW3205 Series
JW3205 mini handheld optical power meter
is the most lightweight and compact in size testing instrument. It features ease-of-use and economy advantages and can be used for
absolute power measurement in optical fibers. JW3205 in combination with the JW3110 mini handheld light source become the most
portable and advantageous testing pair.
Features

The most compact in Size, ideal for field operation

Power measurements in dBm and mw.

10 minutes Auto-off function conserving battery life
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3205A
JW3205B
JW3205C
JW3205D
800~1700nm
Wavelength(nm)
Detector
InGaAs
Measurement Range (dBm)
-60~+3
-50~+10
-40~+20
-30~+30
±5%
Uncertainty
850,980,1310,1550nm
Calibrated Wavelength(nm)
Resolution(dB)
0.01
Optical Connector
FC(interchangeable SC,ST) / as well as 2.5mm universal
Power Supply
Alkaline Battery
360 hours with three 1.5V batteries
Battery Operating Time
Operating Temperature(℃)
-10 ~ +60
Storage Temperature(℃)
-25 ~ +70
Relative Humidity
0 to 95% (non-condensing)
Dimension(mm)
115X60X20
Weight(g)
105
Standard Packages
MODEL
INCLUDES
All JW3205 Models
JW3205 Optical Power Meter, Alkaline battery, Instruction Manul, Cotton swabs and
Protective Holster.
-5-
New in 2010
Expert on Test & Measurement
Passive Components
PON Optical Power Meter------JW3212B
JW3212B PON Optical Power Meter
Is an upgraded version of JW3212B PON power meter, it aims at the FTTx application and maintenance which not only can be used to
test and estimate the signals of the voice, data and video at the same time, but also can be used to test the continues wave light power.
The calibrated wavelengths for CW light power measurements includes 850, 1300,1310,1490,1550,1625nm. It is an essential and ideal
tester for the construction and maintenance of the PON projects.
Features

Providing simultaneous measurement at all three wavelengths on the fiber (1490nm,
1550nm,1310nm )

Used in Burst mode measurement of 1310nm upstream

CW light power measurement is available with wavelengths of
850,1300,1310,1490,1550,1625nm.

VFL Function for quick and efficient Visual Inspection

USB communication port enables data transfer to a PC

1000 measurement items can be saved in JW3212B PON power meter or
computer for data review.

JW3212B PON power meter offers up to 10 different threshold sets in total; Three status LEDs
represent different optical signal conditions of Pass, Warn and Fail respectively.

User self-calibration can be performed and “Factory Default” mode can be retrieved in computer through the software.

PON SC standard connector, easy to test, other type connector port can be required on customer requests.

Backlight LCD display supports night operation.

10 minutes Auto-off function can be activated or deactivated with keypad operation.
Technical Specification
PON module:
Model
JW3212B
1310 upstream measurement
Pass Zone(nm)
1260~1360
[email protected]/1550(dB)
>40
Measurement Range(dBm)
-40~+10
1490 downstream measurement
Pass Zone(nm)
1470~1505
Isolation @ 1550nm(dB)
>30
[email protected] 1310nm(dB)
>40
Measurement Range(dBm)
-40~+12
1550 downstream measurement
Pass Zone(nm)
1535~1570
Isolation at 1490nm(dB)
>40
Isolation at 1310nm(dB)
>40
Measurement Range(dBm)
-40~+25
-6-
Expert on Test & Measurement
Passive Components
Measurement Accuracy
Connatural uncertainty(dB)
±0.5
Linearity(dB)
±0.1
Passing through insertion Loss(dB)
<1.5
General Information
Detector Type
InGaAs
Optical Connector
FC/SC/ST Interchangeable
Fiber Type
9/125um
Display
LCD:128*64
Measurement Unit
dB/dBm/xW
Resolution (dB)
0.01
Operation Voltage(V)
DC 3.3~5.5
Power Supply
3
Continuously Operation time (h)
AA1.5V battery
PON Power Meter Mode:90h
Normal Optical Power Meter Mode:100h
VFL Mode:50h
Operation Temperature(℃)
-10~60
Storage temperature(℃)
-25~70
Weight(kg)
500g
Note: The operation time of the battery are all for the instrument that do not turn on backlight, if the backlight turn on the operation time
will be shorted.
Normal Optical Power Meter Module:
Measurement Accuracy
Connatural uncertainty(dB)
±0.25
Linearity(dB)
±0.1
Measurement Range(dBm)
-70~+6
or -50~+26
General Information
Measurement Unit
dB/dBm
Resolution (dB)
0.01
Calibration Wavelength(nm)
850,1300,1310,1490,1550,1625
Detector Type
InGaAs
Optical Connector
FC/SC/ST Interchangeable/2.5 universal adapter
Fiber Type
9/125um
VFL Module:
Output Power(mW)
1mw
Wavelength(nm)
650
Optical Connector
FC/2.5 universal connector
-7-
Handheld Adjustable Light Source---------JW3116 Series
Expert on Test & Measurement
Passive Components
JW3116 Handheld Adjustable Light Source is Joinwit newly designed fiber optic tester, it aims at fiber network installation,
fiber network engineering acceptance and fiber network maintenance. Combined usage with JW3216 handheld optical power
meter, it offers a quick and accurate testing solution on both SM and MM fibers. The JW3116 provides 1 to 4 wavelengths and
output power can be adjustable on customer requests. Also the JW3116 features good appearance, good touch feeling and
considerate humanity design.
Features







Wave ID information can be transmitted when used with JW3216 Optical Power
Meter.
Tone generation, 270HZ,330HZ,1KHZ,2KHZ
Output power can be adjustable
Output power value is shown on LCD display
Intelligent backlight control (light intensity can be adjusted properly according to
ambient light, which greatly reduced power consumption)
AA alkaline and AC adapter for power supply
Low battery indication
Specifications
Model
JW3116
Operating wavelength(nm)
1310/1550;1310/1490/1550/1625(others specify on requests)
Applicable fiber
SM,MM
Laser type
FP-LD(others specify on requests)
Output Power(dBm)
-7(can be adjustable)
Adjustable step size(dBm)
<0.5
Stability(dB,30min,20℃)
0.15
Modulation(Hz)
CW, 270,330,1K,2K
Fiber Port
FC/PC
Alkaline Battery
3*AA,1.5V
Power Supply Adaptor(V)
8.4
Battery Operating time(h)
45
Operation Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Outline size(mm)/weight
180*90*45(250g)
Standard Package
MODEL
INCLUDES
All JW3116 Models
JW3116 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton
swabs and Soft carrying case.
-8-
Optical Light Source---------JW3111 Series
Expert on Test & Measurement
Passive Components
JW3111 optical light source
Is a handheld optical light source, newly released in 2007. It can provide 1 to 6 wavelengths output to satisfy specific requirements
including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for
multimode fiber, as well as other wavelengths according to customer’s needs. Together with the JW3211 optical power meter, it is a
perfect solution for fiber optic network applications.
Features

Provides 1~6 wavelengths output which can be optional according to
customers’ needs

CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz

High stability of the output power

Stable output wavelength

Backlight LCD display supports night operation

Low battery power indication
modulation output at other wavelengths.
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3111
Wavelengths(nm)
Provides 1~6 Wavelengths according to needs.
Emitter Type
FP-LD,LED
Typical Ouput Power(dBm)
[email protected] / -7 @1310nm,1550nm, -20dBm for LED
≤10
Spectral Width(nm)
Output Stability
±0.05dB/15mins;
±0.1dB/ 8hours
[email protected] / CW,270Hz,1KHz,[email protected],1550nm
Modulation Frequencies
Optical Connector
FC/PC(Other type adapters can be required)
Power Supply
Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)
Battery Operating Time(hour)
45
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
190X100X50
Weight(g)
370
Joinwit Recommendation
JW3111 Handheld Light Source is designed for optimal use with JW3211 Optical Power Meter for measuring optical
loss on both single mode and multimode fiber cable.
Standard Package
MODEL
INCLUDES
All JW3111 Models
JW3111 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual, Cotton
swabs and Soft carrying case.
-9-
Expert on Test & Measurement
Passive Components
Optical Light Source---------JW3109 Series
JW3109 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and
the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths
according to customer needs. Together with the JW3208 optical power meter, it is a perfect solution for the fiber optic network
characterization.
Features

Provides 1~4 output wavelengths which can be optional according to customer’s needs

CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz
modulation output at other wavelengths.

High stability of the output power

Stable output wavelength

Backlight LCD display supports night operation

Compact size and decent appearance

Large LCD, easy operation

Alternative 10 minutes Auto-off function conserving battery life
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3109
Wavelengths(nm)
650
Emitter Type
1310/1550
850/1300
850/1300/1310/1550
FP-LD,LED or others please specify
Typical Output Power (dBm)
0
-7dBm for LD, -20dBm for LED
1.
Spectral Width(nm)
Output Stability
≤10
±0.05dB/15mins;
Modulation Frequencies
CW,2Hz
CW,270Hz,1KHz,2KHz
FC/ universal
Optical Connector
FC/PC
adaptor
Power Supply
±0.1dB/ 8hours
Alkaline Battery(3 AA 1.5V batteries)
Battery Operating Time(hour)
45
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
175x82x33
Weight (g)
295
Joinwit Recommendation
JW3109 Handheld Light Source is designed for optimal use with JW3208 Optical Power Meter for measuring
optical loss on both single mode and multimode fiber cable.
Standard Packages
MODEL
INCLUDES
All JW3109 Models
JW3109 Optical Light Source, Protective Rubber Boot, 3pcs 1.5V batteries,User Manual,
Cotton swabs and Soft carrying case.
- 10 -
Expert on Test & Measurement
Passive Components
Optical Light Source---------JW3118 Series
JW3118 a very economic handheld stable light source, can provide dual wavelength. Used with the same series
JW3218 is a very perfect tools for the fiber optic network maintance
Features

Dual wavelength

4 modulations

Single key can shift the wavelength
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3118
Wavelengths(nm)
1310/1550
850/1300
Emitter Type
FP-LD,
Typical Output Power (dBm)
-6~-7
Output Stability
±0.05dB/30mins
Modulation Frequencies
CW,270Hz,330,1KHz,2KHz
Optical Connector
FC/ universal adaptor
Power Supply
Alkaline Battery(3 AAA 1.5V batteries)
Battery Operating Time(hour)
40
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
164x78x25
Weight (g)
230
Joinwit Recommendation
JW3118 Handheld Light Source is designed for optimal use with JW3218 Optical Power Meter for measuring
optical loss on both single mode and multimode fiber cable.
Standard Packages
MODEL
INCLUDES
All JW3118 Models
JW31118 Optical Light Source, Protective Rubber Boot, 3pcs 1.5V batteries,User Manual,
Cotton swabs and Soft carrying case.
- 11 -
Expert on Test & Measurement
Passive Components
Optical Light Source---------JW3110 Series
JW3110 Mini optical light source
is the most rugged small size instrument in the industry. It integrates super small size and
strong function in one unit. With 3 pieces of
1.5V alkaline batteries, it can work continuously for more than 40 hours. The total weight is only 110g. Together with the JW3205 Mini
optical power meter, it provides an excellent solution for fiber optic network and for field work.
Features

High stability of the output power

Economic type, easy to use

Matched with the JW3205 mini power meter,
it constitutes the smallest optical loss test kit, perfect for field testing
Applications
Maintenance in Telecom Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3110
Wavelengths(nm)
1310 or 1550
Emitter Type
FP-LD
Ouput Power(dBm)
-7~-6
Spectral Width(nm)
≤10
Output Stability
±0.05dB/15mins;
Optical Connector
±0.1dB/ 8hours
FC/PC
Power Supply
3pcs 1.5V alkaline batteries
Battery operating time(hour)
40
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
115X60X20
Weight (g)
110
Joinwit Recommendation
JW3110 Handheld Light Source is designed for mini portfolio with JW3205 Optical Power
Meter for measuring optical loss on both single mode and multi mode fiber cable.
Standard Packages
MODEL
INCLUDES
All JW3110 Models
JW3110 Optical Light Source, Alkaline battery, User Manual, Cotton swabs and
Protective Holster.
- 12 -
Pen-type Visual Fault Locator (VFL)---------JW3105P
Expert on Test & Measurement
Passive Components
The JW3105 Pentype VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber
routing and continuity checking in optical network. It includes:

Finding the breakpoint, poor connections, bending or cracking in fiber optic cables.

Finding the faults of OTDR dead zone

End-to-end visual fiber identification
Features
2.5mm universal connector, for 1.25mm connectors,

FC (Male)-LC (Female) convertor can be provided on requests.

Operates either in CW or Pulsed

Constant output power

Lower Battery warning

Long battery life (up to 60 hours)

Crash-proof and dust-proof design for laser head

Laser case ground design prevents ESD damage

Burning testing to ensure the reliability.

Portable and rugged, easy to use

Guarantee to CE standards include EMC, EMI, ROHS
Specifications
Type
JW3105 Pen-type Visual Fault Finder
Central Wavelength
650nm±10nm (635nm can be required on request)
Emitter Type
FP-LD
Output Power
Optional choice for 1mw, 3mw, 5mw,10mw on actual needs
Optical Connector
2.5mm universal connector
For 1.25mm connectors, FC (Male)-LC (Female) convertor
can be optional on customer requests
Operating Model
Both CW and Pulse available
Pulse Frequency
2~3Hz
Power Supply
2
AA alkaline batteries
Battery Operating Time
[email protected] ≥65hour
[email protected] ≥50hour
[email protected]≥15hour
Test with Panasonic LR6 AA ALKALINE battery
Operating Temperature
-10~+45 (℃)
Storage Temperature
-40~+70 (℃)
¢15X180
Dimension (mm)
Weight
120g(Without battery)
Remark: Colors can be customized on request when meets certain qty!
Standard Packages
MODEL
INCLUDES
JW3105 P
Main Unit (Original color), 2pcs Alkaline battery, User Manual, Cotton swabs and Soft Carrying
case.
- 13 -
Visual Fault Locator(VFL)---------JW3105
Expert on Test & Measurement
Passive Components
JW3105 Visual Fault Locator
is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, an universal connector and an accurate
measurement. The JW3105 visual fault locator easily identifies the cutting, micro-bending of the optic fiber, passes through the jacket
fiber and performs an end-to-end fiber identification. Its measurement range is up to 5km. It is an ideal tool for the examination of all
kinds of patch cords and ribbon or bunched pigtails in the installation and maintenance of fiber optic networks.
Features

Detects breaks, micro-bends even through jacketed fibers

End-to-end visual fiber identification

Locates faults up to 5km along the fiber.

Mechanical fusion splice optimization

Compact size and light weight, suitable for field testing
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3105
Wavelengths(nm)
650±10nm
Fiber Model
SM,MM
Output Power
Optional choice for 1mw, 3mw, 5mw,10mw on actual needs
≤5
Spectral Width(nm)
Emission
CW, 2Hz can be optional
Optical Connector
FC/ Universal 2.5mm adaptor
Power Supply
2pcs AA alkaline batteries
Battery Operating Time
30 hours
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
100X50X25
Weight (g)
56g(Without battery)
Remark: Pen-type VFL can be provided!
Standard Packages
MODEL
JW3105
INCLUDES
JW3105 Visual Fault Locator, Alkaline battery, User Manual, Cotton swabs and
Protective Holster.
- 14 -
Visual Fault Locator(VFL)---------JW3105N
Expert on Test & Measurement
Passive Components
JW3105N Visual Fault Locator
A very economic visual fault locator adaptors the 650nm wavlength laser, it is an ideal tools for the fiber
checking
.
Features

Smaller size and economic

Easy to operate

CE passed
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3105N
Wavelengths(nm)
650±10nm
Fiber Model
SM,MM
Output Power
>0
Spectral Width(nm)
≤5
Emission
CW, 2Hz
Optical Connector
FC/ Universal 2.5mm adaptor
Power Supply
2pcs AA alkaline batteries
Battery Operating Time
40 hours
Operating Temperature(℃)
-10~+60
Storage Temperature(℃)
-25~+70
Dimension(mm)
100X30X18
Weight (g)
37g(Without battery)
Remark: Pen-type VFL can be provided!
Standard Packages
MODEL
JW3105N
INCLUDES
JW3105N Visual Fault Locator, Alkaline battery, User Manual, Cotton swabs and
Protective Holster.
- 15 -
Expert on Test & Measurement
Passive Components
Optical Multi-meter---------JW3207 Series
JW3207 handheld optical multi meter
integrates the functions of an intelligent optical power meter module and of a highly stable light source module in one unit which can
perform closed-loop tests by incorporating both modules. Individual regimes of operation can also be manually chosen using menu
operation to switch functions. A perfect combination to make your optical fiber tests a lot more convenient.
Features

Includes all the outstanding functions of handheld intelligent power meter(JW3206)

Includes all the outstanding functions of handheld stable light source(JW3108)

Switching of the power meter function and that of the light source by menu operation

Different light sources and power meters can be built into JW3207
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3207A
JW3207C
Optical Power Meter Module
Detector Type
IngaAs
Measurement Range(dBm)
-70~+6
Uncertainty
-50~+26
5%
850,980,1300,1310,1490,1550
Calibrated wavelengths(nm)
Rosolution(dB)
0.01
Data Storage Capacity
240 data items
Identification Frequency Rang
10Hz~60KHz
FC(interchangeable SC,ST)
Optical Connector
Optical Light Source Module
Emitter Type
FP-LD
Wavelengths
1310/1550(other wavelengths can be optional)
Ouput Power(dBm)
-7
Spectral Width
≤10nm
Output Stability
±0.05dB/15mins; ±0.1dB/ 8hours
Modulation Frequencies
270Hz, 1KHz, 2KHz
FC/ PC
Optical Connector
General Specifications of Multi Meter
Power Supply
Communication Interface
Battery Operating Time
Rechargeable Battery + Power Supply Adaptor
RS232
≥6 hours(Both Power Meter and Light Source are working)
≥28hours(Only Power Meter is working)
Standard Packages
MODEL
INCLUDES
JW3207
JW3207 Multimeter
Models
Protective Rubber
Rechargeable battery
Power Supply Adaptor
Software Disk
Auto-off time
10mins
Data upload Cable RS232
Operating Temperature(℃)
-10~+60
User Manual
Storage Temperature(℃)
-25~+70
Cotton swabs
Dimension(mm)
Weight (g)
210x115x55
540
Rigid hard carrying case
can be optional
- 16 -
Expert on Test & Measurement
Passive Components
Optical Multi-meter---------JW3204 Series
integrates both an optical power meter module and an optical light source module and can perform closed-loop tests by using both
modules,and can also work individually. It is specifically designed for technical support personnel to test a variety of instruments with a
single meter and thus satisfy the user by providing a choice of greater convenience and more advantages.
Features

Includes all the outstanding functions of the handheld power meter (JW3203R)

Includes all the outstanding functions of the handheld stable light source(JW3104)

Perfect combination to make your fiber measurements more convenient.

Different light sources and power meters can be built into JW3204
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW3204A
JW3204B
-70~+3
-60~+10
JW3204C
JW3204D
-30~+20
-20~+30
Optical Power Meter Module
Detector Type
IngaAs
Measurement Range(dBm)
Uncertainty
5%
Calibrated wavelengths(nm)
850,980,1310,1550nm
Rosolution(dB)
0.01
Optical Connector
FC(interchangeable SC,ST)
Optical Light Source Module
Emitter Type
FP-LD
Wavelengths
1310/1550(other wavelengths can be optional)
Ouput Power(dBm)
-7
≤10nm
Spectral Width
Output Stability
±0.05dB/15mins;
Optical Connector
±0.1dB/ 8hours
FC/ PC
General Specifications of Multi Meter
Power Supply
Rechargeable Battery + Power Supply Adaptor
≥4 hours(Both Power Meter and Ligh Source are working)
≥28hours(Only Power Meter is working)
10mins
Battery Operating Time
Auto-off time
Operating Temperature(℃)
Storage Temperature(℃)
-10~+60
-25~+70
Dimension(mm)
180X85X30
Weight (g)
340
Standard Packages
MODEL
INCLUDES
All JW3204 Models
JW3204 Optical Multimeter, Protective Rubber Boot, Rechargeable battery, Power Supply
Adaptor, User Manual and Cotton swabs.
- 17 -
Optical Fiber Ranger ---------JW3304N
Expert on Test & Measurement
Passive Components
JW3304N Optical Fiber Ranger is the most portable test instrument in the industry. It adopts the OTDR technical principles
and integrates the powerful analysis software, which enables the JW3304N fiber ranger detect fiber faults location more
accurate and easy.
Main Features

Portable, rugged, lightweight; Easy to use.

More accurate testing results and better repeatability.

Up to 8 fiber faults can be detected in each measurement.

Automatic Pulse Width Control design to ensure a convenient operation.

Easy to identify the faults location.

Built-in visual fault locator (VFL), conveniently to find the faults in dead zone.

Dust, water and shock proof, designed for field use

Long battery life, up to 5000 measurements operation.
Applications

Testing the distance of the fiber and identify the faults location in the fiber link.

Locates reflective and non-reflective breaks in the fiber network.

Inspection of fiber repair and maintenance.
JW3304N Fiber Ranger is ideal to be used in FTTx network installation and
maintenance.
Specifications
Model
JW3304N
Operating Wavelength
Fiber Type
1550nm(1310nm Optional)
9/125um SM Fiber
Optical Connector Type
FC/PC
Detector Type
InGaAs
Peak Power of laser
≥60mW
Max. Displaying
Distance
Reflection Event
60km (≥1dB)
Non-reflection Event
20km (≥2.5dB)
Measurement Unit
m
Reflection Event Dead Zone
15m
Distance Accuracy(Reflection Event)
Wavelength of VFL Option
±(2m+2*10(-4)*Distance)
650nm
Output Power of VFL Option
>=1mW
Power Supply
Alkaline Battery (3pcs AA 4.5V Batteries)
Battery Operating Time
≥5000 measurements
Working Temperature
-5~40℃
Storage Temperature
-10~60℃
Humidity
Dimensions
0~85%(Non-condensation)
190*100*50mm
Weight(g)
450
Standard Packages
MODEL
INCLUDES
JW3304N
JW3304N Fiber Ranager, 3pcs 1.5V batteries, User Manual, Cotton swabs and Soft
carrying case.
- 18 -
New in 2010
Expert on Test & Measurement
Passive Components
Optical Fiber Identifier---------JW3306B Series
JW3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power
without any damages to the bended fiber. When the traffic is present,the intermittently audible tone is activated.
The JW3306B optical fiber identifier also recogize the modnulation like,270Hz,1kHz and 2kHz .When they are used to detect
the frequency, the continuously audible tone is activated.There are four adapter
heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. The JW3306B optical fiber identifier
is powered by a 9V alkaline battery .
Features

Easy-to-use with “ONE KEY” operation.

Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz,
2KHz) with audible warning.

Displays the relative core power

More accurate test with Sunshade

Easy-to-replace adaptors

Durable metal housing and quality construction

Lower power indication
Specifications
Type
JW3306B
Identified Wavelength Range
800-1700 nm
Identified Signal Type
CW, 270Hz±5%,1kHz±5%,2kHz±5%
Detector Type
Ø1mm InGaAs 2pcs
Ø0.25 (Applicable for Bare Fiber),Ø0.9 (Applicable for Ø0.9 Cable )
Adapter Type
Ø2.0 (Applicable for Ø2.0 Cable ), Ø3.0 (Applicable for Ø3.0 Cable )
Signal Direction
Left & Right LED
Singe Direction Test Range
-46~10(1310nm)
(dBm, CW/0.9mm bare fiber)
-50~10(1550nm)
Signal Power Test Range
-50~+10
(dBm, CW/0.9mm bare fiber)
Signal Frequency Display (Hz)
Frequency Test Range
270, 1k, 2k
-30~0 (270Hz,1KHz)
Ø0.9, Ø2.0, Ø3.0
-25~0 (2KHz)
(dBm, Average Value)
-25~0 (1KHz,2KHz)
Ø0.25
Insertion Loss(dB, Typical Value)
Alkaline Battery(V)
-20~0 (2KHz)
0.8 (1310nm)
2.5 (1550nm)
9
Operating Temperature(℃)
-10-+60
Storage Temperature(℃)
-25-+70
Dimension (mm)
196X30.5X27
Weight (g)
200
Standard Packages
MODEL
INCLUDES
JW3306B
JW3306B Optical Fiber Identifier, 4pcs adapter heads, Sunshade, Alkaline battery, User Manual,
Cotton Stick and Soft Carrying case.
- 19 -
Expert on Test & Measurement
Passive Components
Optical Talk Sets----------JW4103N
JW4103NOptical Talk Set
is an intelligent and efficient instrument that combines in one set the functions of both a digital optical phone and a stabilized light source.
It is widely used in operations of installation, optical testing, maintenance and fiber attenuation value testing in data network, CATV and
Telecommunication network. The JW4103 Talk Set can carry out full-duplex communication with high quality connection and not be
affected by distance.
Features
Full-duplex digital communication with high quality conversation connection and low
background noise


Together with Optical Clip-on Coupler, enables on line communications available

Combining functions of both a digital optical phone call and a stabilized light
source.

Large LCD display with backlight

Low battery power indication
Applications
Maintenance in Telecom
Maintenance CATV
Fiber Optic Lab Testing
Other Fiber Optic Measurements
Specifications
Type
JW4103N
Wavelength(nm)
1310/1550
Emitter Type
FP-LD
Transmission Distance
≥80km
Dynamic Range
40dB
Output Power
-5~-7dBm(9/125um), CW or 2KHz, 1KHz, 270Hz Modulation
Output Stability
±0.1dB/±0.25dB(1/8hrs) CW
Power Supply
Rechargeable Battery + Power Supply Adaptor
Battery Operating Time
5 hours
Optical Connector
FC/PC
Operating Temperature(℃)
-10 ~ +60
Storage Temperature(℃)
-25 ~ +70
Dimension(mm)
215X115X55
Weight(g)
520
Remark: Joinwit also provides Fiber Optic Clip-on Coupler device according to customers
needs.
Standard Packages
MODEL
INCLUDES
JW4103N
JW4103N Optical Talk Set (pair), Protective Rubber Boot, Headset, Rechargeable battery,
Power Supply Adaptor, User Manual, Cotton swabs and soft carrying case.
- 20 -
Optical Variable Attenuator ---------JW3303
Expert on Test & Measurement
Passive Components
JW3303 handhold optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator is used in the
laser system for the on-line testing, therefore, JW3303 can be used in the digital system of communication devices (such as: PHD, SDH)
and also in the system of adopting analog modulation (CATV)
Main Features

stepwise attenuating by circumgyrated dial: attenuating step 0.05dB

Provide with the function of displaying dB and dBm attenuating value

10 minutes Auto-off function can be activate and deactivate with keypad operation.

After off the instruments, the system will have the memorizing of the attenuating value and the
attenuating step, in order to restore the system back to the previous shut down state when open
the instruments next time

Portable, rugged, lightweight; Easy to use.
Applications

Telecom Maintenance

CATV Maintenance

Comprehensive cable construction system

Optical instruments research and development

Optical communication education and lab testing

Other optical project
Specifications
Type
JW3303
Attenuating wavelength Range
Fiber Model
1260~1650nm
9/125um SM
Optical Connector
FC/PC
Calibrated wavelengths
1310/1490/1550/1625nm
Measurement Range
2~60dB
Resolution
0.05dB
Minimize Insertion Loss
<2.0dB
Linearity
±0.5dB
Repeating
±0.2dB
Attenuating Accuracy
±0.8dB
Return Loss at Input/ Output
>35dB(typical value40dB)
+20dBm
Max input
Displaying type
lattice 128*64 black and white, white back ground light
Rechargeable batteries
8.4V
Power supply adaptor
8.4V
Operation temperature
0~40℃
Operation Time
40 hours
Storage temperature
-10~60℃
humidity
0~85%(non- condensation)
Dimensions
180X90X36.5
Weight
427g
Standard Packages
MODEL
INCLUDES
JW3303
JW3303 Main Body, Protective Rubber Boot, Rechargeable battery, Power Supply Adaptor,
Instruction Manual and Cotton Swabs and Rigid hard carrying case.
- 21 -
Expert on Test & Measurement
Passive Components
JWD1000 Min Series Optical Power Meter
JWD1000 Min Series Power Meter equips with wide angle detector, replaceable attenuator and various fiber adapters, which can be
connected directly with the computer with USB or RS232 communication port. It is an intelligent but economical test device and very
suitable for optical power measurements from Passive Components Producers, Research Lab and University Lab.
Various optical fiber adapters and attenuation
chips can be used upon actual requirements.
Product Features

Wide angle Si、Ge detectors can be alternative
The JWD 1000 min series OPM can support the detector size up to 5mm for Ge detector and 10mm for Si detector.
The measurement wavelength range is from 400~1100nm for Si detector and 800~1600 for Ge detector, with dynamic ranger of
60dB.

Compensation of the detector temperature
JWD1000min series OPM can calibrate the value of the testing result trough the detector temperature compensation; this will
lessen the reading value offset caused by the external temperature change

Various Optical Fiber Adaptors can be required
JWD1000min series OPM provide the FC, SC, ST, LC and other kind of changeable optical fiber adaptors, can adapt for all kinds of
the need of the optical fiber connection.

User-self Calibration Function
Any wavelength can be calibrated by user independently (up to 9 wavelengths calibration can be supported). The device do not
need to send back to the original factory for recalibration, it can be deal with in the local Measurement Bureau for the annually
calibration.

Attenuation Chips can be changeable
JWD1000min series OPM support 10,100 and 1000 absorbability attenuation chips, for the convenience of users’ variable
attenuation requirements.

WIN32 API Support
JWD1000 min series OPM provide various API ports based on WIN32, so that the user can develop its own software according to
its actual requirements, which includes:
1) Data Reading
Read the current wavelength power value (also can customize the relative log, absolute log, and linearity), also can read the
detector temperature
2)
Calibration
Calibrate the current wavelength, zero calibration, and adjust the compensation temperature
3)
Setting
Setting the wavelength, Setting the measurements mode (manual, Auto), Setting the ranger, Setting the filter speed, Setting
Units, Setting the reference value
- 22 -
JWD1000 Min Series Optical Power Meter
Expert on Test & Measurement
Passive Components
Product Specifications
Model
JWD1000 mini Series OPM
Wavelength (nm)
400~1100(Si); 800~1600(Ge)
Pre-determined
850/980/1300/1310/1490/1550/1625(Ge Detector)
;
calibrated wavelength (nm)
660/780/820/850(Si Detector)
Self-calibration wavelength qty
9 Max
Uncertainty(Full rang)
5%
Dynamic Rang(dB)
70
Unit
Linear:nw、uw、mw、w
Log:dB、dBm
Displaying speed(Data average)
SLOW:960ms(16 times on average)
MEDIUM:480ms(8 times on average)
FAST:60ms(uneven)
Resolution
0.001
Communication Port
Standard RS232 Port or USB port
Cable length
1.5m(Standard)or Customized
Operation temperature (℃)
+10~+40
Storage temperature(℃)
- 20~+60
AC adaptor
9V DC/RS232 or supply by USB cable
Warm-up time
20Min.
Weight(kg)
<200g
Dimensions(mm)
Ǿ45×40
Ordering Information
Model
JWD1000-A-B-C-D-E mini Power Meter
Detector Type(A)
1)
2)
3)
4)
1)
2)
1)
2)
1)
2)
3)
1)
2)
3)
4)
5)
Communication port (B)
Cable Length(C)
Attenuator type(D)
Adaptor Type(E)
3mm Ge -60~0dBm
5mm Ge -60~0dBm
5mm Si
-60~0dBm
10mm Si -60~0dBm
RS232
USB
2m(Standard)
5m (Optional)
10 time absorbability attenuation chips (+10~-60dBm)
100 time absorbability attenuation chips (+20~-50dBm)
1000 time absorbability attenuation chips (+30~-40dBm)
FC
SC
ST
LC
Bare Fiber
Remark:1、Each attenuation chip is unique relative to the detector.
2、Extra calibration service can be optional on customer requirements
Standard Packages
Model
include
JWD1000 mini series
Main Unit, RS232 communication cable, FC Adaptor, A piece of Attenuator, AC
Optical Power Meter
adaptor, Software CD, Cotton swabs, User manual.
- 23 -
Expert on Test & Measurement
Passive Components
JW3201N Bench-top optical Power Meter
JW3201N Bench-top Optical Power Meter is a high precision and wide measurement range test instrument which designed specially aim
at passive components factories, R&D institutions and universities. With features of accurate measurements, durable use and easy
operation, JW3201 N Bench-top Optical Power Meter becomes a perfect test equipment in fiber optic works which can instead the
advanced imported products with its high cost-performance ratio.
JW3201N0 Built-in Detector
JW3201N External Detectors Introduction (Refer to right pictures)

JW3201N1 Horizontal detector:
With 2.0mm Photosensitive area, 0dB InGaAs

JW3201N1 Horizontal detector
JW3201N2 Vertical detector:
With 3.0*4.0mm Photosensitive area, 0dB TO detector

The only tip for bare fiber can be optional

Different external detector can be used on customer requirements
JW3201N2 Vertical detector
The only Tip for bare fiber
JW-430 bare fiber tip have a V sharp slot, the bare fiber can pull in and out and orientation repeatedly. And it can protect the fiber
against the pressure from outside, to avoid fiber tortuosity that will cause the polarization dependent loss. JW-430 can fully encircle the
bare fiber, to against the surrounding light come into the fiber, to make the test result more preciously.
V Sharp Slot
N1 type detector or N2 type detector can be matched with JW-430 bare fiber tip
Product Features

External detector makes the testing operation more convenient.

850~1700nm wide wavelength range, wavelength can be adjustable in 1nm increments.

High accuracy, the uncertainty is±3%

Display resolution 0.01dB

Wide Power Measurement range

User self-calibration function

“Ref” setting enables the user to retrieve and display the measurement that has been stored as a reference. Link loss test result
(+5~-75dBm)
obtained automatically without any manual calculation.

Adopt the new Data Acquisition technology to ensure optimum signal-noise ratio.

Use the bare fiber tip to realize power measurement with bare fiber

Enables data transfer to a PC via RS232 communication port as well as data storage automatically.
- 24 -
JW3201N Bench-top optical Power Meter
Expert on Test & Measurement
Passive Components
Through communication with RS232 port and PC, can realize the optical power monitoring without people, as well as
displaying the data on the instrument and the PC at the same time
PC Displaying Interface
Instruments Displaying
Interface
Product Specifications
Type
JW3201N
Wavelength Range(nm)
850~1700 (in 1nm increments)
850,980,1300,1310,1480,1490,1550,1625
Calibrated Wavelength(nm)
Photo Detector
In GaAs
Measurement Range (dBm)
+5~-75dBm (other measurement range can be customized)
Intrinsic Uncertainty
±3%
Communication interface
RS232
Resolution(dB)
0.01dB
Optical Connector
FC
Power Supply
AC90~260V,50Hz
Operating Temperature (℃)
-10~+40
Storage Temperature (℃)
-25~+70
Dimension(mm)
260*190*120
Weight (kg)
2.75
Ordering Information
Model
Description
JW3201N-X
JW3201N0: Built-in Detector
JW3201N1: Horizontal Detector
JW3201N2: Vertical Detector
JW-430
JW-430 Bare Fiber Tip
Standard Packages
Model
Standard Package List
JW3201N0/N1/N2
Main Unit, External Detectors for N1 and N2, RS232 data transfer cable, Power
Bench-top Power Meter
supply Adaptor, Software CD, Cotton swabs, User Manual
- 25 -
Expert on Test & Measurement
Passive Components
ASE Broadband Light Source--------JW3107
JW3107 ASE (Amplified Spontaneous Emission) broadband light source
is designed specially for manufacturing of passive optical components and for testing in lab research. The main body of the light source
is composed of high-powered pump laser and erbium doped fiber. Inimitable ATC and APC circuits are used to ensure the stability of the
output power. The output power can be adjustable in a certain range by adjusting the APC. The JW3107 broadband ASE light source
can operate in the C band, the L band as well as in the C+L band.
Features

High output power, the max output power can reach 100 mw.

Wide operating bandwidth, covering C-band and/or L-band

Excellent flatness within spectrum range

Intelligent micro processing system and long distance control

High stability and reliability

Highly accurate ATC and APC control electro circuit
Applications
Manufacturing and Testing of Passive Optical Components
WDM Testing
Manufacturing and Testing of EDFA
Lab Testing and Fiber Optic Sensor Systems
Other Optical Fiber Engineering Applications
Specifications
JW3107
MODEL
C-Band
L-Band
C+L Band
Operating Wavelength
1525~1565
1570~1610
1525~1610
Optical Output Power
>10mW
>10mW
>10mW
Spectrium Density Stability
±0.05dB/15min
±0.05dB/15min
±0.05dB/15min
Output power stability in 15 minutes
±0.02dB/15min
±0.02dB/15min
±0.02dB/15min
Output power stabiltiy in 8 hours
±0.05dB/8hour
±0.05dB/8hour
±0.05dB/8hour
2dB w/ GFF, 7dB w/o GFF
<10dB
<13dB
Output return loss
>45dB
>45dB
>45dB
TEC stability
±0.1℃
±0.1℃
±0.1℃
TEC operating range
25±5℃
25±5℃
25±5℃
85~264VAC
85~264VAC
85~264VAC
<15W
<15W
<15W
0~45℃
0~45℃
0~45℃
-40~+80℃
-40~+80℃
-40~+80℃
Flatness
Operating Voltage
Power Consumption
Operating Temperature
Storage Temperature
Dimensions
280×260×112mm(Benchtop), 150×125×90mm(Module)
Weight
4.5kg
Remark: Module, Benchtop, 1U Rack available.
Standard Packages
MODEL
INCLUDES
JW3107 all models
JW3107 ASE Broadband Light Source, Power Supply Cable, Fuze, User Manual and Cotton
swabs.
- 26 -
Insertion Loss and Return Loss Test Station----JW3307A
Expert on Test & Measurement
Passive Components
JW3307A Insertion Loss/Return Loss Test Station
is a high performance loss test station that is designed specially for
Optical Passive Components production Test and Lab Test. It combines
three different working modes as a return loss meter, optical power and
loss meter and a stable laser source in one test station. It features:

High measurement accuracy

Accurate analysis to wide dynamic ranger and weak signal

Two LCD displays used, efficiently reduced eye strain of operators

Leakage design of optical power meter module and light source
module, obviously reduced operation procedures.

Removable optical connector set design, easy to clean

USB Port design, enables data transfer to a PC with USB cable
Specifications
Model
JW3307A
Optical Return Loss Test
Wavelength
1310/1550nm
Optic Connector
FC/APC
Return Loss measurement Range
0 ~ 75dB
Calibrated wavelength
850/1300/1310/1550nm
Output Stability of laser source
0.05dB(1 [email protected]°C)
Measurement accuracy
0.25dB
Resolution
±0.3dB
Optical Power and Insertion Loss Test
Wavelength Range
Calibrated wavelength
Optic Connector(Power Meter)
800~1700nm
850/1300/1310/1550nm, more other wavelengths can be optional
Interchangeable FC/SC/ST/2.5mm Universal /1.25mm adaptors
Photo detector
InGaAs
Display modes
dBm/dB/xW
Measurement range
+3 ~ -80 dBm
Non-linear 0.001dB ;Linear:0.001nw/µW/mW
Resolution
Measurement accuracy
±5%
Other Specification
Communication Port
Power Supply
USB
AC 90-260V,50~60Hz
Operation Temperature
-5℃~+55℃
Storage Temperature
-25℃~+70℃
Dimensions
300X260X120mm
Weight(kg)
3
Standard Packages
MODEL
INCLUDES
JW3307A
JW3307A Main Body, Power Supply Cable, FC Adaptor, SC Adaptor, ST Adaptor,
25mm Universal, 1.25mm Universal Adaptor, User Manual, FC/APC-FC/APC patch cord
FC/APC-FC/PC patch cord, Cleaning Cotton Swab, Fuse, USB Cable, PC software, Foot Pedal
- 27 -
Expert on Test & Measurement
Passive Components
New in 2010
Insertion Loss and Return Loss Test Station(MM)----JW3307B
Specifications
Model
JW3307B
Optical Return Loss Test
Wavelength(nm)
850/1300 (50/125 or 62.5/125)
Optical Connector
FC/APC
Return Loss measurement Range(dB)
0 ~ 75
Calibrated wavelength(nm)
850/1300
Output Stability of laser source(dB)
0.05/[email protected]℃
Measurement accuracy(dB)
0.25dB
Linearity(dB)
0.05dB
Optical Insertion Loss Test
Detector
InGaAs
Wavelength Range
800~1700nm
Calibrated wavelength
850/1300/1310/1550nm
Measurement range(dBm)
-80~+3
Optic Connector(Power Meter)
FC/SC/ST,2.5mm Universal /1.25mm adaptors
Uncertainty(dB)
0.25
Linearity(dB)
0.05
Display modes
Linearity and non-linearity
Resolution
Non-linear 0.01dB ;Linear:0.001nw/µW/mW
Measurement accuracy
0.01dB
Other Specification
Communication Port
USB
Power Supply
AC 170-260V,50~200Hz
Operation Temperature(℃)
-5~+55
Storage Temperature(℃)
-25~+70
Dimensions(mm)
280X260X120
Weight(kg)
3.11
Standard Packages
MODEL
INCLUDES
JW3307B
JW3307B Main Body, Power Supply Cable, FC Adapter, SC Adapter, ST Adapter,
25mm Universal, 1.25mm Universal Adapter, User Manual, FC/APC-FC/APC reference patch cord,
Scrambler, Extinction Module, Cleaning Cotton Stick, Fuse, USB Cable, PC software, Foot Pedal
- 28 -
Expert on Test & Measurement
Passive Components
New in 2010
Optical Components Test System ---------JW3215
JW3215 Optical Components Test System is the new released multi Channel testers, It mainly focus on the PLC, and FBT coupler
testy system requirements. It provide 8 channels power meter, maximum inner 1x4 optic switch, PDL controller, and can
maximum measure 4 wavelength 1x64 splitter at one time. The function will be included insertion loss, PDL value, coupling
ratio, access loss…and so on. This testing system can realize threshold setting, disqualification measurement value warming,
auto-saving, EXCEL data sheet printing via the software connection with PC. It is am prefect measurement testing system for
the PLC multiple testing, optical components PDL measurements, and long-term stability measurements…and so on.
Feature:
1. Provide 8 channels power meter
2. Maxim can test 64 channel PDL, IL, access loss and coupling ratio
measurements
3. Inner 1x4 optical switch, can maxim measurement 4 wavelength test at
the same time
4. Multi wavelength auto testing, threshold setting, auto saving, and
EXCEL data sheet printing.
Specification
Model
JW3215
Wavelength Range(nm)
800~1700
Detector Tye
InGaAs
Output Power Measurement Range
(dBm)
+3~-70
Measurement value
Insertion Loss/ Access Loss /PDL/Coupling Ratio/
PDL measurement uncertainty
±0.04dB
PDL measurement repeatability
Insertion Loss uncertainty
±0.01dB
±0.1dB
Resolution
0.001 dB
Laser Source Channel
4 channel optical switch
Power Meter Connector
FC/SC/ST/2.5mm Universal
Laser Source Connector
FC/PC
Displaying
4.3 inch Color\with software\EXCEL data sheet
printing
Communication Port
RS232
Power Supply
90~260VAC
Standard Packages
MODEL
INCLUDES
JWD1100
JW3215 Optical Components Test System, Power Supply Cord, Fuze, Instruction Manual and
Cotton swabs.
- 29 -
New in 2011
32Channel Power Meter---------JW3217
Expert on Test & Measurement
Passive Components
JW3217 is a new released multi-channel power meter. It combine the
multi-function of graph interface displaying via PC, , auto-measurement
shifting, data saving, data printing, and also realized simultaneous output
power of 32 channel. This tester provide a friendly operation interface, via
it’s software, and can realized automatic monitoring, saving, data analyze,
and printing function. It is a perfect instruments for the multi channel
measurement, stabilize testing, and used in the fiber optic research and
development area.
Feature:

32 channel simultaneous output power monitoring

Stability testing monitoring

Any time data printing
 Graph the output power changing.
Specification
Model
JW3217
Calibration wavelength(nm)
850,980,1300,1310,1480,1490,1550,1625
Detector Tye
InGaAs
Connector type
FC/PC
Output Power Measurement Range
(dBm)
+3~-60
Communication Port
RS232
AC Power(V.50Hz)
160~200
Operate temperature(℃)
Storage temperature(℃)
-10~+40
-25~+70
220*440*350
Dimensions(mm)
Standard Packages
MODEL
INCLUDES
JW3217
JW3217 32Channel Power Meter, Power Supply, RS232 cable, Instruction Manual and Cotton
swabs.
- 30 -
Expert on Test & Measurement
Passive Components
Fused Optical Couplers----SM Dual-window Optical Coupler
Description
Joinwit adopts the FBT technique to produce the SM
coupler with the high performance and liability which
achieve the advanced level of similar products in the
world. The extremely low excess loss greatly increases
the coupler’s liability and long-term stability. Joinwit
adopts the unique craft to eliminate the reflection of the
1X2 coupler’s spare input fiber end and ensure its
long-term stability and at least 60dB directivity. Joinwit
also supply the 1XN (NXN) Tree/Star type coupler by
grade-connection 1X2 coupler.
Features
Low PDL
Low Excess Loss
Good Directivity
Good environmental Stability
Standard/Flattened/Broadband/Star/Tree
Applications
Optical Fiber Communication Systems
Optical Fiber CATV
Passive Optical Network (PON)
Optical Amplifiers
Optical Access Networks/LAN
Monitoring Systems
Optical Fiber Sensor
Specifications
Type
Central Wavelength(nm)
Standard
Dual-window Brad
Single-Window Broadband
1310nm or 1550nm
1310nm and 1550nm
1310nm or 1550nm
±20
±40
±40
Bandwidth(nm)
Star Structure
4*4
8*8
16*16
4*4
8*8
16*16
4*4
8*8
16*16
Tree Structure
1*4
1*8
1*16
1*4
1*8
1*16
1*4
1*8
1*16
Typical Insertion Loss(dB)
6.3
9.5
13.0
6.6
9.6
13.2
6.6
9.6
13.2
Uniformity(dB)
0.7
1.0
1.3
1.5
2.2
3.0
0.9
2.8
3.7
PDL(dB)
Mini. Directivity(dB)
0.10
60
Operating Temperature(℃)
-40~+75
Storage Temperature(℃)
-40~+85
Packing Type
Industry Standard
Selectable Packing Size
Customer Specify
Telcordia GR-1221-CORE
①¢3.0X50 (Stainless steel sleeve packing) ②90X20X9
③100X80X10 ④120X80X18 ⑤140X114X18
- 31 -
Fused Optical Couplers----PON Optical Coupler
Expert on Test & Measurement
Passive Components
Description
Joinwit adopts unique bandwidth extension techniques
(asymmetric craft) for the tri-windows couplers to
change the characteristic of the wavelength and make
tri-windows at 1310/1490/1550nm wavelength meet the
precision requirements of the coupling ratio. This unit
specially applies for the low-cost solution of “ 3 in 1
network” and tri-wavelength bi-direction transmission
with a single fiber in FTTx network.
Features
Low PDL
Low Excess Loss
Good Directivity
Good environmental Stability
Tri-operating windows
Applications
Optical Fiber Communication Systems
Optical Fiber CATV
Passive Optical Network (PON)
FTTx
Specifications
Type
Standard Tri-window Optical Couplers
Central Wavelength/Bandwidth(nm)
1310±40, 1490±10, 1550±40
Coupling Ratio (%)
1~50
Typical Excess Loss(dB)
0.15
Typical Insertion Loss(dB)
3.6
PDL(dB)
0.10
Directivity(dB)
55
Temperature Coefficient(dB/℃)
0.002
Operating Temperature(℃)
-40~+70
Storage Temperature(℃)
-40~+85
Max Operating Power(mw)
300
Max Tensile Strength(N)
Max Insertion Loss(dB)
Insertion Loss Uniformity(dB)
Industry Standard
5
1*4
1*8
1*16
1*32
7.0
10
13.5
17.0
1*4
1*8
1*16
1*32
1.6
1.8
2.4
3.0
Telcordia GR-1221-CORE
- 32 -
Fused Optical Couplers----Multi-Mode Optical Coupler
Expert on Test & Measurement
Passive Components
Description
Joinwit adopts the FBT technique to produce the basic
1X2 coupler unit with the high-level performance. By
grade connecting the basic 1X2 coupler unit, the
Star/Tree coupler eliminates the component pattern
sensitivity. It is widely used in the LAN, PON, other
optical fiber communication systems and optical fiber
sensor systems.
Features
Low PDL
Low Excess Loss
Good environmental Stability
Applications
Optical Fiber Communication Systems
Optical Fiber CATV
Optical Amplifiers
Optical Access Networks/LAN
Monitoring Systems
Optical Fiber Sensor
Specifications
Type
Multi-Mode
Wavelength(nm)
850/1300
Star Structure
2*2
4*4
8*8
16*16
Tree Structure
1*2
1*4
1*8
1*16
Typical Excess Loss(dB)
0.7
1.5
2.0
3.0
Max Insertion Loss(dB) @50/50
4.2
8.4
11.8
16.0
Uniformity(dB)
0.5
1.0
1.5
2.0
Fiber Type
Coring 50/125 or 62.5/125
Operating Temperature(℃)
-40~+75
Storage Temperature(℃)
-40~+85
Packing Type
Customer Specify
Industry Standard
Selectable Packing Size
Telcordia GR-1221-CORE
①¢3.0X50 (Stainless steel sleeve packing) ②90X20X9
③100X80X10 ④120X80X18 ⑤140X114X18
Fused Optical Couplers----19’’ Rack Type Optical Coupler
Features
19’’ 1U standard type
Adapter or pigtail output
Optical Connector FC/PC,FC/APC,SC/PC,ST etc.
Applicable for various kinds of optical coupler
Applicable for WDM
- 33 -
Fused WDM----1310/1550nm Standard WDM
Expert on Test & Measurement
Passive Components
Description
Joinwit produce a variety of WDM with the different
isolation by basic unit or basic unit grade-connection
methods. It is widely used in upgrade, expansion or
introduction of new business of the optical fiber
networks. The experiment and practice show its good
quality and high performance.
Features
Low Insertion Loss
High Isolation
Low PDL
Good directivity
Good environmental Stability
Applications
Optical Fiber Communication Systems
Optical Fiber CATV
Optical Fiber Test Equipment
Optical Fiber Access Networks
Optical Fiber Sensors
Specifications
Type
Multiplexer
Demultiplexer
Standard
High Isolation
Wavelength(nm)
1310/1550nm
Bandwidth(nm)
±15
Max Insertion Loss(dB)
Mini Wavelength Isolation(dB)
±10nm bandwidth
Typical Isolation(dB)
0.35
0.35
0.75
1.0
18
18
30
40
20
20
37
45
Directivity(dB)
>60
PDL(dB)
<0.1
Max bearing power(mw)
300
Max Tensile Strength(N)
5
Operating Temperature(℃)
-40~+70
Storage Temperature(℃)
-40~+85
Packing Type
Industry Standard
Selectable Packing Size
Ultra Isolation
Customer Specify
Telcordia GR-1221-CORE
①¢3.0X50 (Stainless steel sleeve packing) ②90X20X9
③100X80X10 ④120X80X18 ⑤140X114X18
- 34 -
New in 2009
PLC Optical Splitter
Expert on Test & Measurement
Passive Components
Features
Low Insertion Loss
Low PDL
High Return Loss
Uniform Power Splitting
Wide Operating Wavelength
Wide Operating Temperature
Good Environmental Stability
Qualified under Telcordia GR-1221 and GR-1209
Applications:
FTTx System
CATV Networks
Passive Optical Networks (PON)
Local Area Networks (LAN)
Test Equipments
Specifications:
Parameter
Specification
Operating Wavelength (nm)
1260 ~ 1650
Type
1x4
1x8
1x16
1x32
2x4
2x8
2x16
2x32
1x64
Insertion Loss (dB) Max.
7.3
10.8
13.9
17.0
7.8
11.2
14.5
17.8
20.5
Uniformity (dB) Max.
<0.8
<1.0
<1.2
<1.5
<1.0
<1.5
<1.5
<2.0
<2.5
PDL(dB)Max.
<0.2
<0.2
<0.3
<0.3
<0.3
<0.3
<0.4
<0.4
<0.3
Directivity (dB) Min
55
Return Loss (dB) Min
50
Operating Temperature (°C)
-40~ +85
Storage Temperature (°C)
-40 ~ +85
Fiber length
1m or custom length
Fiber Type
ITU G652.D/G657.A Fiber
Connector Type
Custom specified
Note: All measurements were done at room temperature, and specifications exclude connectors
Ordering Information
PLCS
Port Type
Cable Type
Fiber Length
Connector
Type
Package Style
PLC
1*4
0.25mm Bare fiber
1 meter
FC/APC
Stainless steel sleeve
Splitter
1*8
Ribbon Fiber
2 meter
FC/PC
Plastic Module
1*16
Fan-out with 0.9mm
3 meter
SC/APC
19’’ 1U Rack Mount
1*32
Loose Tube
Others specify
SC/PC
Others Specify
1*64
2.0mm Cable
ST/UPC
2*32
3.0mm Cable
LC/APC
Others
Others Specify
Specify
- 35 -
Micro Optics Products----1310/1550nm WDM
Expert on Test & Measurement
Passive Components
Wide Operating Wavelength Range
Low insertion Features
loss
Ultra Flat Wide Passband
High channel isolation
High stability and reliability
Epoxy free on optical path
Applications
System Monitoring
WDM system
Transmitters and Fiber lasers
Fiber optic amplifier
Fiber optic Instruments
Specifications
Parameter
MWDM-35/53
Pass Channel Wavelength Range(nm)
1520∽1600(or 1250∽1350)
Reflect Channel Wavelength(nm)
1250∽1350(or 1520∽1600)
Insertion Loss(dB)
Reflect Channel
≤0.5
Pass Channel
≤0.6
Insertion Loss Variation(dB)
<0.3
Isolation
Reflect Channel
>12
Pass Channel
>30
Insertion Loss Temperature Sensitivity(dB/℃)
<0.005
Polarization Dependent Loss(dB)
<0.1
Polarization Mode Dispersion(ps)
<0.1
Directivity(dB)
>60
Return Loss(dB)
>50
Power Handling(mW)
300
Operating Temperature(℃)
0∽+70
Storage Temperature(℃)
-40∽+85
Fiber Type
Corning SMF-28
ф5.5×L34(L38 for 900um Jacket)
Package Dimension(mm)
Ordering Information
Micro-WDM
Wavelength
Fiber Type
Fiber Length
In/Out Connector
0=None
1=FC/APC
a
35=1310 pass/1550 reflect
53=1550 pass/1310 reflect
1=Bare Fiber
2=900um Jacket
3=3mm Cable
1=1 Meter
2=2 Meter
2=FC/PC
3=SC/APC
4=SC/PC
5=ST
6=LC
- 36 -
Expert on Test & Measurement
Passive Components
Micro Optics Products ----FTTx 1310/1490/1550nm WDM
Features
Low insertion loss
Ultra Flat Wide Passband
High channel isolation
High stability and reliability
Epoxy free on optical path
Bi-Directional
Applications
ONU, OLT Equipments
Fiber-to-Home, Premises
Transmitters and Fiber lasers
WDM system
CATV system
Ф5.5
Common Port
Pass Port
XXXXXXXXX
Reflection Port
34
55
Specifications
Parameter
Unit
Specifications
Central wavelength
nm
1310, 1490, 1550
Pass band
nm
1310±40, 1490±10 & 1550±10
Pass/Reflection wavelength
nm
On customer request
Pass band insertion loss
nm
≤0.8
(0.6 typical)
Reflection band insertion loss
dB
≤0.6
(0.4 typical)
Pass band isolation
dB
≥30
Reflection band isolation
dB
≥15
Directivity
dB
≥55
Return loss
dB
≥50
PDL
dB
≤0.1
Wavelength thermal stability
nm/ ℃
≤0.003
Insertion loss thermal stability
dB/ ℃
≤0.005
Power handling
mW
≤500
Operating temperature
℃
-40 ~ +85
Storage temperature
℃
-40 ~ +85
Dimensions
mm
Ф5.5× L34
*The above specification is without connector.
Ordering Information:
FTTH
WDM
Wavelength
Fiber Type
Fiber Length
In/Out Connector
0=None
1=FC/APC
15=1550 pass/1310&1490 reflect
34=1310&1490 pass/1550 reflect
1=Bare Fiber
2=900um Jacket
3=3mm Cable
1=1 Meter
2=2 Meter
2=FC/PC
3=SC/APC
4=SC/PC
5=ST
6=LC
- 37 -
Expert on Test & Measurement
Passive Components
Micro Optics Products ---CWDM Moudule
F
e
a
t
u
r
e
s
:
Low insertion loss
Wide pass band
High isolation
High stability and reliability
Epoxy free on optical path
A
p
p
l
i
c
a
t
i
o
n
c
a
t
i
s
:
CWDM systems
Line Monitoring
Fiber Optical Amplifier
CATV Fiber Optic System
S
p
e
c
i
f
i
o
n
s
:
Type
4 Channels
8 Channels
≤2.0
≤3.5
Insertion loss (dB)
1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411,
Central wavelength (nm)
1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611
Channel space (nm)
20
λc ± 6.5
Channel bandwidth (nm)
Channel flatness (dB)
≤0.4
Channel uniformity (dB)
≤1.0
Isolation (dB)
Demux adjacent channel
≥30
Demux non-adjacent channel
≥40
Mux
≥15
Directivity (dB)
≥55
Return loss (dB)
≥50
PDL (dB)
≤0.15
PMD (ps)
≤0.1
Wavelength thermal stability (nm/℃)
≤0.003
Insertion loss thermal stability (dB/℃)
≤0.005
≤500
Power handling (mW)
Operating temperature (℃)
0 ~ +70
Storage temperature (℃)
-40 ~ +85
Note: The above specification is without connector
Other specifications can be made on customer request
O
r
C
W
D
M
d
e
r
i
T y
p e
n
g
P
r
N
m
e
I
o
t
u
b
r
n
f
o
r
O p e
r a t
i n g
w a v
e l e
n g t
h
m
a
t
i
P i g
t a i
l
T y p
e
o
n
C o
n n
e c t
o r
T y
p e
P
a
a
S
c
g
i
k
e
z
e
- 38 -
M =
M U
X
D =
D M
U X
1
2
1
3
1
4
X
1
1
1
1
1
1
X
X
4
n
4
n
5
7
m
9
m
1
0
5
m
1
0
= 2
0 u
F C
/ A
P C
S C
/ A
P C
= 9
0 u
l Expert
a con Test & Measurement
B
k
C
M
l
L
Passive Components
a s e
o d u
e
G X
Micro Optics Products ---Isolator (ISO)
Features
H i g h
L o w
H i g h
i s o l a t i o n
i n s e r t i o n
r e t u r n
l o
l o
s s
s
s
Ф
Applications
E
D
F A
C
o
m
m
u
n
i
n
g
f
i
T e
s
t
S
e
c
p
i
i
c
a
t
i
o
n
I
n
s
t
r
u
a
t
i
o
n
c
S
p
S
e
i
S
m
e
s
t
e
n
t
s
m
a
l
m
s
S
i
L
s
N
T y
y
o
n
t
r
g
a
l
g
e
D
e
S
z
u
t
e
M i n i
S i z e
a
a
l
g
e
S
i
n
g
l
e
S
t
a
g
O
p
e
r
a
G
r
a
d
e
P
e
a
k
M
i
n
i
s
t
r
u
n
P
D
L
(
d
B
P
M
D
(
p
s
R
e
t
P
o
w
e
r
O
p
e
r
a
S
t
o
D
i
m
r
t
r
a
e
1
m
I
u
n
3
1
P
m
e
i
n
±
0
1
5
A
o
P
A
±
1
5
A
A
2
4
0
5
6
5
3
≥
≥
3
2
3
0
5
2
5
0
≥
≥
≤
≤
)
≤
≤
≤
≤
≤
≤
)
≤
≤
≤
≤
≤
≤
5
/
6
0
/
6
5
/
n
i
o
Ф5.5× L30
6
0
5
0
0
0
~
+
7
0
4
0
~
+
8
/
5
5
a
e
4
≤
s
g
e
0
t
≤
6
e
5
S
≤
n
n
g
5
a
l
≤
o
i
1
u
≤
i
t
r
D
/
5
5
/
0
Ф3.0× L26
Note: The above specification is without connector
Other specifications can be made on customer request
- 39 -
O
I
S
O
r
d
e
r
T y
p e
S
S
g
S
g
D
=
i n
l e
t a
e
=
i
n
g
G
I
r
d
P
e
e
A
A
r
=
r
c
=
v
a
a
e
P
f
t
e
g
n
f
o
r
O
a
m
p e r
t i n
g
w a v e
l e n g
t h
1
3
m
5
5
m
0
1
= 1
0 n
0
5
= 1
0 n
a
t
i
P i
g t
a i l
T y
p e
1
2
0
m
2
9
=
5
u
=
0
o
Expert on Test & Measurement
Passive Components
n
F i
b e
r
T y
p e
S
F
2
H
1
6
M
8
I
0
0
C o
n n
e c t
o r
T y
p e
F C
/ U
P C
F C
/ A
P C
P
a
a
S
N
r
S
(
)
M
c
g
i
k
e
z
e
= N o
m a l
i z e
Φ5.5×L30
=
M
i
- 40 -
Optical Cable Patch Cords & Pigtails
Expert on Test & Measurement
Passive Components
Description
The optical Fiber Connectors (Commonly we call Patch
Cords) is a length of optical cable with connectors fixed on
two ends to realize the optical path active connection.
Pigtail is a length fiber cable with only one connector fixed
on one end. If both sides of the connector or its end-face
are different, we call it hybrid patch cord. According to the
transmission medium, it divides Single Mode and Multi
Mode; according to the connector structure type, it divides
FC,SC,ST,MU,D4,E2000,LCetc.;according to the polished
ceramic end-face, it divides PC,UPC and APC.
Features
Low Insertion Loss
High Return Loss
Good Repeatability
Good Exchangeability
High Temperature Stability
Applications
Optic-fiber Communication Systems
Optic-fiber Data Communications
Optic-fiber Access Networks
Optic-fiber CATV
LAN
Test Equipment
Optic-fiber Sensors
Specifications
Item
Unit
FC,SC,ST/PC
≤0.20
FC,SC,ST/UPC
FC,SC,ST/APC
≤0.20
≤0.30
Insertion Loss
dB
Repeatability
dB
≤0.10
Exchangeability
dB
≤0.20
Return Loss
dB
≥45(SM)
≥50(SM)
Corning SMF-28TM, 9/125um (SM), 50/125um or 62.5/125um(MM)
Fiber Type
Operating Temperature
℃
-40~+80
Storage Temperature
℃
-40~+85
time
>1000 times
Durability
Industry Standard
≥60(SM)
Telcordia GR-326-CORE
Note:
Specifications of each type patch cord cannot be listed here one by one because of variety of different kinds of patch cords.
So please kindly to contact us for any more details!
- 41 -
Bunched (Ribbon) Fan-out Optical Cable Patch Cords
Expert on Test & Measurement
Passive Components
Description
Bunched (Ribbon) Fan-out Optical Patch Cord
is protected and separated fiber ribbon (general
12 cores) with connector on the end to realize
the separate fiber connection with the ODF. The
quality and performance is reliable and stable.
Features
Low Insertion Loss
High Return Loss
Good Repeatability
Good Exchangeability
High Temperature Stability
Applications
ODF(Optical Distribution Frame)
Optic-fiber Communication Systems
Computer Networks
Optic-fiber Access Networks
Optical Fiber Test Equipment
Specifications
Item
End-Face Type
Insertion Loss (dB)
FC, SC, ST…
PC
UPC
APC
≤0.20
≤0.20
≤0.30
Repeatability (dB)
≤0.10
Exchangeability (dB)
≤0.20
Return Loss (dB)
Fiber Type
Operating Temperature (℃)
Storage Temperature (℃)
Durability (time)
Industry Standard
≥45
≥50
≥50
≥50
Corning SMF-28TM, 9/125um
≥60
≥50
-25~+70
25 70
-40~+85
>1000 times
Telcordia GR-326-CORE
- 42 -
Water-proof Pigtails
Expert on Test & Measurement
Passive Components
Description
Water-proof Pigtails is generally used in the severe
field environment, so it greatly depends on the
components’ reliability. Joinwit employs the advanced
technique and production equipment to ensure its
good performance and environmental stability. Joinwit
provides various types available for customers,
including such as Simplex, Duplex and 4 cores…etc.
Features
High Performance
High Tensile Strength; Anti-etched
Waterproof and Anti-corrosive
Easily Installed
Applications
Optic-fiber Communication Systems
Optic-fiber CATV
Connecting between Backbone Optical Cable and Receiver
Specifications
Item
FC/APC
SC/APC
Insertion Loss (dB)
≤0.30
Repeatability (dB)
≤0.10
Exchangeability (dB)
≤0.20
Return Loss (dB)
Fiber Type
≥60
Corning SMF-28TM, 9/125um
Operating Temperature ℃
-25~+70
Storage Temperature ℃
-40~+85
Industry Standard
Telcordia GR-326-CORE
- 43 -
Optical Fiber Adapter & Hybrid Adapter
Expert on Test & Measurement
Passive Components
Description
The optical Fiber Adapter is the connection part in
the active optical connectors. Joinwit provides the
full range of adapters including FC,SC,ST and
hybrid adapters. These adapters are widely used in
ODF, optic-fiber communications equipment, optical
fiber instruments etc. The performance is stable
and reliable.
Features
Accurate Dimensions
Good Exchangeability
Good Repeatability
Good wear Resistance
Good Temperature Performance
Applications
Optic-fiber Communication Systems
Optical Fiber Sensor
Optical Fiber Test Equipment
Optic-fiber CATV
Specifications
Item
FC/PC
FC/APC
SC/PC
Insertion Loss (dB)
≤0.20
Repeatability (dB)
≤0.10
Exchangeability (dB)
≤0.20
Ferrule Material
Operating Temperature ℃
Storage Temperature ℃
Industry Standard
SC/APC
ST
Ceramic
-40~+80
-25~+70
-40~+80
-40~+85
Telcordia TA-NWT-001209
- 44 -
Hybrid Adapter & Optical Bare Fiber Adapter
Expert on Test & Measurement
Passive Components
FC(Male)-LC(Female), LC(Male)-SC(Female) Hybrid Adapter
Description
Joinwit
design
the
practical
and
exquisite
FC-LC,LC-SC hybrid adapters to meet the
customers’ special requests. The hybrid adapters
solve the converted connection between 1.25mm
and 2.5mm ferrules. In the mean time, it also
solve the problem of large insertion loss and
damageable disadvantage during the converted
connection of optical patch cords. It is a good
choice for converted connection between the
optic fiber equipment and other optical fiber test
instruments.
Optical Bare Fiber Adapter
Description
The bare fiber adapter is used to connect the bare
end-face of the optical fiber or optical fiber cable.
Together with test instruments with FC or SC
connectors, they could be easily used for the
intuitionistic inspection and faults identification. It
is applicable for the lab research and field work.
Applications
Optical Fiber Communication System
Optical Fiber Sensor
Optical Fiber Test Equipment
Optical Fiber CATV
- 45 -
Optical Fiber Attenuators
Expert on Test & Measurement
Passive Components
Fixed Attenuators
Description
Fixed Attenuator is a precise passive component
which provides different fixed attenuation value to
meet optical fiber projects’ demands. Joinwit’s fixed
attenuator is made of high precision adapter and
features high attenuation precision and good
performance.
Features
High Attenuation Precision
Good Stability
Small size
Applications
Optic-fiber Communication Systems
Optical Fiber Sensor
Optical Fiber Test Equipment
Optic-fiber CATV
Specifications
Item
Attenuation value (dB)
FC/PC
SC/PC
3,5,8,10,15,20
Attenuation precision (dB)
±10%
Operating Temperature ℃
-25~+70
25 70
-40~+85
Storage Temperature ℃
Industry Standard
ST
Telcordia TA-NWT-001209
- 46 -
Optical Fiber Attenuators
Expert on Test & Measurement
Passive Components
In-line Fixed Attenuator
Applications
Optic-fiber Communication Systems
Optical Fiber Sensor
Optical Fiber Test Equipment
Optic-fiber CATV
Specifications
Item
Standard
Operating Wavelength(nm)
Bandwidth(nm)
Wavelength Flattened
1310 or 1550
1310/1550
±20
±40
Attenuation value (dB)
1~30
Return Loss (dB)
≥40
Operating Temperature ℃
Storage Temperature ℃
Industry Standard
Broadband
-40~+85
25 70
-40~+85
Telcordia TA-NWT-001209
Variable Attenuator
Description
The variable optical attenuator could continually
and variably attenuate the light intensity in the
optical fiber transmission.
Specifications
Item
Operating Wavelength(nm)
Attenuation value (dB)
Excess Loss (dB)
Operating Temperature ℃
Storage Temperature ℃
Industry Standard
Specification
1310/1550
1310/1550
0.5~30
<0.3
-40~+85
25 70
-40~+85
Telcordia TA-NWT-001209
- 47 -
Optical Fiber Attenuators
Expert on Test & Measurement
Passive Components
Collimator Variable Optical Attenuator
Description
The collimator variable optical attenuator is an
useful attenuation tool, which the attenuation value
can be adjustable by mechanical adjustment. It
employs the principle of light shading between the
two collimators to control the attenuation value. It
features wide attenuation range, high precision, low
insertion loss and compact size.
Applications
Optic-fiber Communication Systems
Optic Passive components test
Optics Lab Use
Specifications
Item
Wavelength(nm)
Attenuation Range(dB)
Insertion Loss(dB)
Return Loss(dB)
1310
1550
SM DW
MM SW
1310±40
1550±40
1310±40&1550±40
850±40 or1310±40
0.6~60
0.6~60
0.8~60
0.8~40
0.6
0.6
0.6
0.8
50
Adjustment Precision(dB)
Fiber Type
30
0.02
SMF-28
PDL
Operating Temperature ℃
Storage Temperature ℃
50/125 or 62.5/125 MM
0.15
-25~+70
25 70
-40~+85
Note:
Output connector type can be made on customers’ request
- 48 -
JW5001 Optical Cable Emergency Tool Kits
Expert on Test & Measurement
Passive Components
JW5001 Optical Cable Emergency Toolkits is composed of most of the essential tools, it is suitable for general
usage during the fiber installation and maintenance of fiber networks.
No.
Tool Name
Qty
Function
1
Fiber Optic stripper(CFS-2)
1
Peeling the coat of the fiber
2
Assembled sleeve wrench
1
Fixing splice closure/terminal box
3
2M Tape Measures
1
Measuring the length of the fiber cable
4
Utility Knife
1
Accessorial tool for peeling the fiber cables
5
Piano wire clamp
1
Nipping the strengthening core of the fiber cables
6
Cross Fiber reamer
1
Peeling the fiber cables
7
Nipper
1
Entwining the fiber cables
8
Scissors
1
Snipping the fiber of the cable
9
Pliers
1
Snipping the steel wire of the fiber cables
10
Acuate clamp
1
Accessorial tool for the splicing
11
Mini Screwdriver
2
Fixing the screws
12
Inner-hexagonal Wrench
1
Fixing the inner hexagonal screws
13
Adjustable Spanner
1
Accessorial tool for the splicing
14
Assembled Screwdriver
1
Loading and uploading the fiber optic splice closure
15
Alcohol Pump Bottle
1
Cleaning the fiber
16
Mark Pen
1
Marking the fiber
17
Flashlight
1
Lighting at night
18
diagonal cutting pliers
1
Accessorial tool for peeling the fiber cables
19
Voltage test pen
1
Testing the security of the electrical source and
electrical wire
20
Loose skinning pliers
1
Peeling the loose of the fiber cables
21
Cleaning Air Ball
1
Blow off dust
22
Carrying Case
1
Containing the above tools
- 49 -
Expert on Test & Measurement
Passive Components
JW5003 cable Inspection & maintenance tool kits
JW5003 cable Inspection & maintenance tool kits composed of JW3205 mini power meter, JW3304N fiber ranger,
fiber cleaver and other optical tool kits. This set of tool kits can test the output power, Identify the long and short
distance fault locations, connect the cables and so on. JW5003 is mini in size, convenience for carrying, quite
popular used in the field of optical cable maintenance.
Standard configuration
No.
Name
1
Fiber Ranger
2
Alcohol Bottle
3
Optical Fiber
Cleaver
4
Mini Power Meter
5
Model No
Set
Usage
1
Identify the fault location for
the long and short distance
1
storing alcohol
1
Cleave the fiber
1
Test the output power
Hexangular
wrench
1
Take apart or assemble the
splicing closure
6
CFS-2 Fiber optic
stripper
1
Strip the jacket or coated fiber
7
wire-cutter
1
Cut the strengthened cable
core
8
Monkey Wrench
1
Take apart or assemble the
splicing closure
9
Cutter
1
Strip the fiber (extra refill
cutter)
10
Cross Screwdriver
1
Take apart or assemble the
splicing closure
11
Straight
Screwdriver
1
Take apart or assemble the
splicing closure
12
User manual
1
Instruction and maintenance
for
13
Carry Case
1
Contain all above tools
JW3304N
5mL
JW3205
8”
JW5003
JOINWIT
- 50 -
Expert on Test & Measurement
Passive Components
JW5004 FTTx Tool Kits
This set of tool kits is especially used in the FTTx solution, combine the function of the in-door cable stripper, cleaver,
cleaning, and testing. It is an perfect tool kits in the fiber optic maintance.
NO.
Tool Name
Qty
Usage
1
Fiber Optic stripper
1
Peeling the coat of the fiber
3
rubber-insulated fiber cable stripper
1
Peeling the coat of the cables
4
Alcohol Bump Bottle
1
storing alcohol
5
Cleaning Cotton Swabs
2
cleaning fiber
6
JW3105P Visual Fault Locator
1
Visually checking breakpoints, poor connections,
bending or cracking in fiber optic cables
7
JW3208 optical power meter
1
Test the output power and fiber loss
8
Optical Fiber Cleaver
1
Cleave the fiber
9
Carrying Case
1
Containing the above tools
- 51 -
JW5002N-Fiber Inspection& Cleaning Kits
Expert on Test & Measurement
Passive Components
JW5002N Fiber Inspection and Cleaning Kits includes everything you need to perform inspection and cleaning of the fiber end faces,
including Fiber Patch Cords, Bulkhead connections/In-adaptor ferrules and fibers in preparation for splicing applications. This tool kits
contains following items:
1)
JW5005N Probe Fiber Microscope with 200x magnification----1pcs
To perform fiber inspections on both patch cords and bulkhead adapters.
Including patch cords inspection tips of Univ. 2.5mm and Univ. 1.25mm;
Bulkhead inspection tips of FC/PC,SC/PC, ST/PC and LC/PC.
2)
JW3105P Visual Fault Locator-----1pcs
Visually checking breakpoints, poor connections, bending or cracking in fiber optic cables
3)
JW5006 Fiber Connector Cleaner(QAM Cleaner)----1pcs
4)
JW5008 Pen-style Fiber Cleaner -
To perform patch cords cleaning.
2.5mm&1.25mm----1pcs of each
To perform bulkhead/in-adaptor ferrule cleaning
5)
Alcohol Bump Bottle----1pcs
6)
Cleaning Cotton Swabs----2pouch
7)
Hard Carrying case-----1pcs
To place above items
The pictures of all the items are given as below:
- 52 -
Field Fiber Microscope
Expert on Test & Measurement
Passive Components
JW5003 Field Fiber Microscope is a low cost and high quality fiber inspection tool which is available in 400X
magnification and the white LED light to provide coaxial illumination to connector end-faces. This is method of
illumination products high-resolution detail of end-face scratches, defects and contamination.
Features of JW5003 Field Fiber Microscope

Portable and easy to use, ideal for filed operation

Magnification:400 times, can be used in both SM and MM fibers

Optical Connector: 2.5mm universal adapter, 1.25mm universal adapter

Color: Black or white

Power Supply: AAA batteries

Battery Life: 40hours

A specialized design to protect the eyesight
- 53 -
New in 2009
Probe Fiber Microscope------JW5005N
Expert on Test & Measurement
Passive Components
JW5005N Probe Fiber Microscopes offers 200x or 400x magnification for the fibers of 125um diameter (both SM and MM
fibers are included). It not only can be used to inspect the male connector ends but also to inspect the female bulkhead
adapters.
Probe with handheld monitor
Probe with video capture card and
work with PC (For Optional)
Specification
Magnification
200X or 400X alternative
AV output
PAL
Display Screen
3.5〃TFT 220 K LCD
Power Consumption
3W
Working Temperature
-10℃—+50℃
Storage Temperature
-20℃—+60℃
Voltage
12V recharge battery incl. or DC 12V, W/adaptor
Working Hours
More than 6 hours
Dimension
monitor: 205mm(L)×94mm(W)×25mm(H); microscope:φ23mm×160mm
Configuration of JW5005-N
Item/Model
Name
Qty
Remark
JW5005N
Fiber Inspection Probe
1pcs
JW35
Handheld Display (3.5inch)
1pcs
2.5mm/PC-M
To inspect 2.5mm male connectors
1pcs
1.25mm/PC-M
To inspect 1.25mm male connectors
1pcs
FC/PC-F
To inspect FC/PC in-adapter ferrule
1pcs
Standard
SC/PC-F
To inspect SC/PC in-adapter ferrule
1pcs
Accessories
LC/PC-F
To inspect LC/PC in-adapter ferrule
1pcs
Battery Charger
1pcs
Hard Carrying Case
1pcs
User Manual
1pcs
JW-20
Video Capture Card along with software
1pcs
SC/APC-F
To inspect SC/APC female connectors
1pcs
Optional Accessories
- 54 -
2.5mm/APC-M
To inspect 2.5mm/APC male connectors
1pcs
1.25mm/APC-M
To inspect 1.25/APC male connectors
1pcs
Expert on Test & Measurement
Passive Components
Fiber Connector Cleaner ------JW5006
Features





Safe and environment friendly: No chemicals and other waste such as alcohol, methanol, cotton tips or lens tissue; Safe to
operator and no hazard to environment; No ESD contamination.
User friendly: With few simple steps, ideal cleaning result can be achieved, whether the connector is contaminated by oil
or dust.
Excellent result: Fast, effective, repeatable cleanings
Economical: New design for low cost; One unit is good for over 500 cleaning; the cartridge is replaceable; Easy to replace.
Wide application areas: It can be used in lab environment. It is also suitable for fiber optic construction, maintenance, and
equipment manufacture.
Wide usability: It can be used for SC, FC, ST, D4, LC, DIN and Bionic connectors. Cleaning tape is replaceable, thus
reducing long-term cost
Specification
Type
JW5005 Fiber Connector Cleaner
Cleaning Times
Over 500 times per reel
Cleaning Result
-20 to -50 dB (Return Loss)
Operating Temperature
-10℃ to +50℃
Weight
100 g
Ordering Information
Name
Function description
Quality
Cleaning the fiber connector ferrule (internal reel tape is included)
1 Set
Replacement Reel Tape of JW5005, can be sold with extra cost
1pcs
Standard Accessories
JW5005 Fiber Cleaner
Optional Accessories
Reel Tape
- 55 -
Expert on Test & Measurement
Passive Components
Electromotive Fiber End-face Cleaner ------JW5007
The JW5007 electromotive fiber-end face cleaner is designed not only to clean the male connector ends, but also to clean the
female bulkhead adapters (Ferrule end-faces inside the adapters). It is a convenient and simple cleaning tool in fiber network
maintenance and fiber components production.
Features

Clean fiber end-face of PC and APC ferrule in diameter 2.5mm &1.25mm.

Clean fiber end–face for male connector of ferrule and female connector of flange.

Cleaning directly and without any cleaning liquids

Only 3 seconds to finish the cleaning work and the cleaning grade up to 88%~98%

Suitable for complex environment and field operation

Low cost and high quality cleaning material

Two AA batteries and continues 100 hours operation
Note:
JW5007 electromotive cleaner, is an accessorial tool for the JW5005 series Fiber Microscope, It mainly used for fiber end-face
besmirch cleaning. It can be used for PC, APC (female) end-face cleaning inside 2.5mm, 1.25mm deep aperture. When do
cleaning, press the ON/OFF button for 3 seconds can finish the cleaning.
Cleaning Materials Introduction
2.5mm Cleaning Swab:500pcs/box
1.25mm Cleaning Swab: 300pcs/box
Note:The cleaning times for each swab cannot be more than
30 times and each cleaning time cannot be more than 3
seconds
- 56 -
Expert on Test & Measurement
Passive Components
In-adaptor Ferrule Cleaner ------JW5008
The JW5008 Pen-style fiber cleaner is designed specially to only clean the female bulkhead adapters (Ferrule
end-faces inside the adapters).It is a convenient and simple cleaning tool in fiber network maintenance and fiber
components production.
Features
 Over 500 cleaning times for fiber end-faces
 Cleaning grade up to 95%~99.9%
 For oil stain and water, the cleaning result is much better than traditional cotton swabs
 Support 1.25mm (LC, MU) and 2.5mm (SC,FC,ST)
 Pocket size and easy to use
 Low cost and high performance
- 57 -
Multi-function Fiber Cable Stripper---------JW5009
Expert on Test & Measurement
Passive Components
The JW5009 Multi-Function Fiber Cable Stripper is a powerful manual tool which specially used in
stripping of the cable sheath. The perfect design of JW5009 Fiber Cable Stripper created a great improvement
to the cable reliability and safety during cable installation, especially under on line cable stripping.
Main Functions and features:
 Inimitable Design: One time stripping available at any position of the cable
 One knife for multiple using: Cable Stripping available in directions of lengthwise, cross as well as
revolving!
 Feed size can be adjustable: Knife feed size forwards 0.5mm during every time rotation by feed
handle, it highly improved the accuracy of feeding.
 Suitable for different size of cables: Diameter range of Fiber Cable:Ø8~Ø24mm; Thickness range of
cable sheath : 0~6mm .
 One pushing to make in place clamping structure: To fix and loosen the cable quickly.
Operating Instructions:
Stripping Methods:
Across Stripping, Lengthwise stripping and Rotation Stripping all are available.
Procedures of Cable stripping
Please refer to above picture for better understanding, details of the procedures are given as below (see next
page):
- 58 -
Multi-function Fiber Cable Stripper---------JW5009
Expert on Test & Measurement
Passive Components
1) ④&⑥ clockwise direction for feed, counter clock wise for revise function.
2) Scale return to zero: Adjustment by handle rotation, to make “0”align to scale reference line.
3) Press heavily “Cable loosen handle”, push out“Cable tighten fitting ” to make enough space to place the
cable for stripping.
4) Push in “Cable tighten handle”” to make the cable to be fixed by cable tighten fitting(but do not too
tighten)
5) Confirm the stripping method, then put “Cable stripping direction handle” to align the correspond position.
6) To define the knife feed size as per cable sheath thickness, revolve clockwise “feed handle” to reach the
expected feed depth.
7) Stripping cable
8) After finish stripping, press heavily “Cable loosen handle” and then use the cable to push
“Cable tighten
fitting” , then take out the stripped cable.
9) To clean JW5006, make the scale line align to zero and put it into the carrying case.
Special Notes:
Changing stripping method, needn’t loosen the cable, please act as below procedures:
a)
To make the scale line align to zero
b)
Take “Cable stripping direction handle”to align the correspond position, then perform as per procedure
from 6~8 as above.
Blade replacement:
If the blade be used is not sharp enough or damaged by any occasion, then the user can replace the new
blade by loosen the screw.
Clean and maintenance:
a) Wipe off the chippings, water, oil and other unclean things.
b) Spreading proper oil on the blade to avoid rust.
c) Place it well in the specified tool kits.
- 59 -
Tools for Fiber Cable
Expert on Test & Measurement
Passive Components
Lengthwise Fiber Cable Stripper
Based on lengthwise function, we increase the design of double-blade.
It is ingenious, time saving, labor saving.
It is an absolutely necessary tool in Optical Cable Stripping.
Used for stripping all kinds of optical cable lengthways(¢10~¢30mm)
Across and Lengthwise Fiber Cable Stripper
Based on lengthwise fiber cable stripper, increased across stripping function.
It can strip both across and lengthways.
It is an absolutely necessary tool in Optical Cable Stripping.
Used for stripping all kinds of optical cable lengthways(¢10~¢30mm)
Side Fiber Cable Ripper
Use for stripping the protective covering of aluminum armor plastic
and nonmetallic strengthen component optical cable.
Fiber optic cable jacket slitter
Fiber Optic Cable Jacket slitter is an efficient and indispensable tool
for fiber optic cable termination. It easily slits the PVC cable jacket into
two halves before crimping. In both field and plant applications, time is
saved and consistency is resulted with this precise and innovative tool.
Cable can be processed
¢1.5~1.9MM
¢2.0~2.4MM
¢2.5~2.9MM
¢3.0~3.3MM
- 60 -
Optical Connector Introduction(For Power Meters & Light Sources)
Expert on Test & Measurement
Passive Components
Optical Adapters for Optical Power Meter Output
Option 1: FC, SC, ST Interchangeable / 2.5mm universal connector adapter Port
is the most commonly used connector type for Joinwit Optical power meters. It features:
a) Interchangeable FC, SC, ST connector adapters, which means the user can choose any
of the FC, SC, ST adapters to be fixed well with the connectors. Changing the adapter is very
simple: unscrew one and screw in the next. Please refer to the picture below for a better
understanding.
b) 2.5mm Universal connector adapter. After unscrewing any of the interchangeable
connector adapters, the user will see a fixed 2.5mm metal plug which we call a 2.5mm
universal connector adapter. It can accept most of the 2.5mm diameter ferrule connectors,
such as FC,SC, ST,DIN, E2000 and SMA. It means that with one plug a variety of connectors
can be connected as long as the ferrule diameter is 2.5mm. These connectors however use
only a push/pull mechanism and cannot to be fixed or screwed. Please refer to the right picture for a better understanding.
Note: Usually, if no customer special requests, we will use this type connector port as
the standard adaptor for our Handheld optical power meters.
Option 2: LC, SC, ST, FC Interchangeable adapters Port (No Universal Adapter Available)
To meet the requirements of the LC connector type, we specially released the Option 2
interchangeable connector adapters. It features:
a) LC, SC, ST, FC connector adapters can be interchangeable, which means the user can
choose any one of LC,SC ,ST and FC adapters to be fixed well with the connectors. Changing
the adapter is very simple, unscrew one and screw in the next. Please refer to the picture
below for a better understanding.
b) No universal connector adapter available.
Please refer to the pictures below for a better understanding!
Optical Adapters for Light Source Output
Option 1: FC fixed connector Port
FC fixed connector port type is the most commonly used in Optical Light Sources with features of reliability and high accuracy in
measurement!
Note: Usually, if no customer special requests, we will use this type connector port as the
standard adaptor for our Handheld optical Light Source.
Option 2: FC, SC, ST interchangeable connector Port
FC, SC, ST connector adapters can be interchangeable, it means the user can choose
any one of FC,SC ,ST adapters to be fixed well with the connectors. Changing the adapter
is very simple, unscrew one and screw in the next. Please refer to the picture below for a
better understanding.
Note: Connecting directly with the 2.5 ceramic ferrule is not recommended in order to avoid
any damage of the ceramic ferrule. Please connect with connectors after screwing the
corresponding connector adapter.
To satisfy with customers’ various requests for adaptors, we also can supply custom made adapters according to customers’ special requests.
Detailed adapter pictures cannot be shown here individually, so please feel free to ask us if what you require is not presented here!
- 61 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement