HOLMAN MK21010 10m Charcoal Misting Kit User guide
The Holman MK21010 misting kit can reduce outdoor temperatures up to 10 degrees Celsius, making it ideal for cooling down patios, recreation areas, and pet areas. It operates with a minimum water pressure of 345kPa and a maximum pressure of 620kPa, and can be connected directly to a garden tap or via a garden hose. The kit includes 10 meters of 7mm misting hose, 5 brass misting jets, a misting filter, and various connectors and fittings. The fine mist produced by the jets is gentle on plants and seedlings, making it suitable for use in greenhouses.
Advertisement
Advertisement
Charcoal Colour
Misting Kit
10 Metres
PRODUCT CODE MK21010 www.holmanindustries.com.au
User Guide
Contents
Overview 3
Features 3
Components 4
Plan your Misting Installation 5
Installation 6
Understand your Water Supply 6
How to Position Misting Jets
Benefits of a Misting Timer
7
8
Installing Misting Timer to Misting System
How to Join Misting Tube to Compression Fittings
Installing your Misting System
Flushing the System
Maintenance 16
Drain Water from your System 16
Clean Misting Jets
Flush System
16
16
9
10
12
15
Clean Filter 17
Troubleshooting 18
Please read these instructions in full before proceeding with setup.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Holman Industries is under license. Other trademarks and trade names are those of their respective owners.
All other content is Copyright © Holman Industries 2022.
2 of 20
Overview
Features
L Misting kits can reduce your outdoor area temperature by up to 10 degrees
L Perfect to cool down patios, recreation and pet areas
L Keeps areas and plants cool during hot summer days
L The super fine mist is ideal for watering greenhouses without damaging plants or seedlings
L 7mm diameter high pressure tube with compression fittings
L Easy to assemble–fittings simply push over hose tubing with no clamps required
L 3°C minimum working temperature
L 275 kPa minimum operating pressure
L 345kPa – 620kPa operating pressure
Also available in CHARCOAL:
20m
Retractable
Hose Reel
CD1120C
For perfect retraction every time, easy rewind means a tidy and stylish garden, all year round.
3 of 20
Overview
(continued)
Components
1
1. 5× 7mm Barbed/4mm
BSP Threaded Tee
2. 1× 7mm Barbed
Tee Connector
3
3. 1× 7mm Barbed/4mm BSP
Threaded End Connector
4. 1× 7mm Barbed
Elbow Connector
5
7
5. 1× 7mm Barbed Joiner
6. 16× Hose Clamps
7. 5× 4mm BSP Brass Jets
8. 1× 4mm BSP Auto Drain Valve
9
9. 1× 20/25mm BSP
Universal Tap Adaptor
10. 1× 20mm BSP Misting Filter
11. 1× 7mm Misting Hose, 10m
11
10
2
4
6
8
Misting Kit
Parts and
Accessories
These misting parts give you the ultimate flexibility to build your misting system exactly the way you want.
4 of 20
11
Tap
1
10
Overview
(continued)
Plan your Misting Installation
® Plan where to position the MISTING JETS
(page 7) , where your water source will come from
(page 6) and where the supply pipeline will run
® Plan where to attach pipework and a route to easily attach it together
® Position MISTING JETS to create a “mist curtain” around your outdoor area
6 1
4 3
7
8
® Illustration shows example of basic layout
5 of 20
Installation
Understand your Water Supply
Á Only fresh tap water is recommended as bore or dam water may contain sediment that will block MISTING JETS
® The misting system uses very little water volume.
Each jet uses 2 litres an hour
® This misting system is designed to run from your household mains tap pressure
® Please operate within the pressure ratings listed on page 3
® The higher the pressure, the finer the droplets, the quicker and more effectively they evaporate and cool the area. A normal household water supply is usually at an adequate pressure
® The MISTING TUBE can be connected directly to a garden tap
® You can use a garden hose to bring water from a tap to the start of the MISTING TUBE work (page 12)
® To easily maintain access to your garden tap, install a manifold as shown below
Metal
Tap Outlet
Manifolds
Our tap outlet manifolds convert one garden tap into independent, manually operated outlets. Giving you more flexibility in the garden.
6 of 20
Installation
(continued)
How to Position Misting Jets
Á Position MISTING JETS away from where people sit as the jets may drip water
Á Too much water can be a problem. The air can become saturated and even wet the people and objects in the space
® Factors to consider are:
• Spacing of MISTING JETS [a] along MISTING TUBE [b]
• Location of jets over tables or chairs
• How many jets in a particular area
® There are no fixed rules to how you position the MISTING JETS .
The more jets you have, the more water you will use and potentially the cooler the space will become
L Space jets between 600mm and 1000mm apart
L Locate jets away from tables and sitting areas if possible
L Try to create a curtain of mist on two sides of the area being cooled a b a
Spacing 600 to 1000mm for effective coverage of chosen area
7 of 20
Installation
(continued)
Benefits of a Misting Timer
L To achieve the best misting results install a MISTING TIMER
L Regulate the amount of water entering a space by adjusting the “ ON ” times and “ OFF ” times of the timer
L MISTING TIMERS allow you to make these settings in seconds, where other timers may not have this feature
L We have several Tap Timers with misting settings
Also available:
Beat the heat and complete your outdoor misting setup!
Perfect for the short-burst intervals needed to create a cool environment outdoors.
CO1609
Our single outlet BX1
Bluetooth ® Tap Timer includes a Misting Timer function and is the perfect companion to your Charcoal
Misting Kit .
Bluetooth Tap Timer
Our WX1 Wi-Fi Tap Timers include a Misting Timer function and are the perfect companion to your
Charcoal Misting Kit .
8 of 20
Installation
(continued)
Installing Misting Timer to Misting System
1. Install MISTING TIMER directly to tap
® Use UNIVERSAL
TAP ADAPTOR to connect 20 to 25mm fittings if needed
2. Connect MISTING TIMER to MISTING FILTER
® If using a GARDEN HOSE to bring water from a tap to the start of the MISTING TUBE refer to GARDEN HOSE installation (page 12)
3. Install misting system and program your
MISTING TIMER to desired settings
Use Universal Tap
Adaptor for 25mm taps
9 of 20
Installation
(continued)
How to Join Misting Tube to Compression Fittings
Á Once tubing is installed to ELBOW, TEE or
JOINER CONNECTORS it cannot be removed
1. Measure and cut
MISTING TUBE to desired lengths for effective coverage of chosen area
® This system features
“compression fittings”:
• These fittings grip the MISTING TUBE and prevent it loosening or leaking
• To ensure a good joint, the misting tube must be cut square and free of burrs
• To quickly ensure a square cut, use a
MISTING TUBE CUTTER
(sold separately)
Also available:
MS20011
10 of 20
The Misting Kit Plastic
Tube Cutter gives you the ultimate flexibility to build your misting system your way. The quickest way to ensure a square cut, everytime.
Installation
(continued)
How to Join Misting Tube to Compression Fittings (continued)
2. Once MISTING TUBE is cut, the compression fitting can be installed
3. Bring the two parts together, level and straight
4. Push MISTING TUBE
[c] in while twisting the compression fitting [d]
5. The MISTING TUBE [e] should enter the fitting [f] at least 10mm
Á Once tubing is pushed into the barbed fitting it cannot be removed
Á Do not push tubing in more than 10mm–this will cover and block the spray outlet d e f c 10mm
Installation
(continued)
Installing your Misting System
1. Start at the garden tap or water source point. If using a GARDEN HOSE [g], it is recommended you install a 12mm SPRINKLER ADAPTOR [h] (sold separately) into MISTING FILTER [i] as shown
Á If your GARDEN HOSE is running in the sun, ensure it is a good quality hose that can withstand the pressure when the water and hose may get heated
Á It is highly recommended that the
MISTING FILTER be installed immediately after the connection to the water source g h i
12mm
Sprinkler
Adaptor
8010HB
The Quick Release snap-on fitting makes installing and swapping between hose end products to your garden hose, quick & easy!
12 of 20
Installation
(continued)
Installing your Misting System (continued)
3. Use ELBOW CONNECTOR
[m] to go around corners
2. Run MISTING TUBE [i] to a low position to install
AUTO DRAIN VALVE [k] using THREADED TEE
CONNECTOR [j]
® Valve automatically releases pressure and “dumps” water in MISTING TUBE
“above” the level of
AUTO DRAIN VALVE when water is turned off
® Valve stops MISTING JETS from “dripping” and the build up of precipitated salts
(like calcium and iron) j m
4. Work out the spacing of
MISTING JETS and cut
MISTING TUBE [n] to length and install THREADED TEE
CONNECTORS [o]
600mm–1000mm apart o k n l
13 of 20
Installation
(continued)
Installing your Misting System (continued)
5. Finish the line with the THREADED END
CONNECTOR [p] p
6. Position HOSE CLAMPS [q]
70–80mm each side of compression fittings to attach MISTING TUBE [s] to wall or beams
Á Connect each section of MISTING TUBE before pinning to walls or beams
70-80mm
Á Avoid installing
MISTING TUBE in direct sunlight as this may cause the tube to go brittle over time
® HOSE CLAMPS use a strong masonry nail that should not bend when you hammer it into timber or masonry
® If hammering into metal, the correct nails will need to be purchased
® Run pipework along mortar joints in brickwork. Hammer the hose clamps into the brickwork for a reliable result
70-80mm
14 of 20 q r s
Installation
(continued)
Flushing the System
1. Perhaps the most important part of the installation process is to properly flush the system
2. Remove ALL MISTING JETS and connect the water and run for 4 or 5 minutes
® This will ensure all dirt and pipe swarf is flushed from the system.
If this is not done, MISTING JETS will clog and not work
3. After misting system has been flushed, attach
MISTING JETS to THREADED TEE CONNECTORS
15 of 20
Maintenance
Drain Water from your System
® When your system is not in use, drain all water from system.
If using an AUTOMATIC DRAINING VALVE , this will happen automatically
® If this is not shutting off while in use, unscrew the valve inside a container and check the internal spring and ball bearing–if these are not moving freely, the valve may need cleaning or replacing
Á These small parts fall out easily–using a container will prevent the parts being lost
Clean Misting Jets
® Periodically clean all MISTING JETS by soaking them in a solution of vinegar, or similar calcium and iron remover
® If MISTING JETS are “dripping” or not “misting” properly, they must be removed and soaked in cleaning solution
® If this fails to clean MISTING JETS , it is highly recommended to purchase replacement jets and replace as required
Flush System
® Periodically remove all MISTING JETS and flush the system by running water through it for 4 or 5 minutes
16 of 20
Maintenance
(continued)
Clean Filter
® Periodically clean the MISTING FILTER by soaking in a solution of vinegar to remove calcium and iron build up
® This cleans solid particles away and dissolves calcium and iron deposits that build up as water evaporates in MISTING FILTER and MISTING JETS
The Holman website has a host of additional information on features. Head to support.holmanindustries.com.au
for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team at [email protected]
or call at 08 9416 9999 .
17 of 20
Troubleshooting
Question
Why is my auto drain valve leaking?
I cannot remove the MISTING TUBE from the barbed fittings. Can
I reuse these fittings?
Why am I missing a misting jet?
Why do I have an extra 7mm
Barbed/4mm BSP Threaded Tee?
Answer n The line not reaching pressure, ensure there is sufficient supply pressure to run the system efficiently n We recommend cutting the hose free of the fitting. With a clean cut on the end of the hose, the connection will be better in future n To remove MISTING TUBE from the fittings, it is possible by soaking the connection in hot water, and wiggling the hose free. This method however is not recommended for a good quality connection n This extra fitting is actually for the 4mm BSP Auto Drain Valve n Please visit www.holmanindustries.com.au/ product/misting-jet-nozzles/ for info on where to purchase more
MISTING JETS if necessary
18 of 20
Holman Industries
Australian Family Owned
11 Walters Dr, Osborne Park WA 6017 [email protected]
www.holmanindustries.com.au
Thanks for being a
#SMARTGARDENER
We really appreciate having you as a customer, and would like to say thank you for choosing us.
We recommend registering your new product on our website. This will ensure we have a copy of your purchase and activate an extended warranty. Keep up to date to with relevant product information and special offers available through our newsletter.
www.holmanindustries.com.au/product-registration/
Copyright © 2022 Holman Industries

Public link updated
The public link to your chat has been updated.
Advertisement