Bloody Mary

Bloody Mary
Bloody Mary
U SER MA NUA L
BLOODY MARY controls
CONGRATULATIONS ON YOUR PURCHASE OF BLOODY
MARY, THE ULTIMATE DISTORTION PEDAL FOR SHREDDERS.
Bloody Mary delivers a truly wicked distortion that’s never generic. An alchemist’s blend of precision controls makes sure that
your sound is yours alone - a lethal potion of razor gain, tone and
body. You’ll find an overview of the controls on the next page.
GAIN
controls the degree of distortion. Experiment to get the edge you want - but don’t max it out if you’re afraid of hurting yourself!
LEVEL
sets the overall volume, no matter what the gain. Use it with a “level” head - this pedal is loud.
LOW
takes you to a subterranean universe of power for thumping chords and sublime leads that reach as deep as they soar high.
MID
controls the sweet spot that gives you fullness and body. Pull it back for a classic metal sound. Crank it up to go grunge.
HIGH
unleashes a blitzkrieg of searing sonic pleasure. Turn it all the way up, and it will cut through solid steel. Handle with care.
BODY
delivers a rich extra fill by boosting lower-mids and lows. Kick it in to give your sound an extra lift at critical moments.
Technical specs
Size Box 100x120x35mm + Switches/ knobs on top
6mm + Knobs on bottom 3mm.
Input Impedance @ 1KHz
937KOhm
Output [email protected]
1,2KOhm
Power supply
9V DC (Power tool 9)
Minimum Power supply Voltage
8V DC
Maximum Power supply Voltage
12,5V DC
Current Draw @ 9V DC
30mA
Connections
INPUT-Jack 6,3mm. OUTPUT-Jack 6,3mm.
DC-Jack 2mm pin. Center pin negative.
Maximum input signal Vp/p
2,5Vp/p
Power supply 9 volt DC or battery 9V Alkaline.
Battery Type
9V battery 6F22
Power consumption
30 milli Amperes.
Battery Life
3 to 5 Hour
Weight 500 gram packed in a box.
External connectors
Input Jack, Output Jack, 9V DC
Jack
Battery Open the battery-cover on the back using
a flat-tipped screwdriver in the slot.
Controls
On/Off, Level, Comp, Gain, Low,
Mid, High, Body
Depth
120mm
Width
100mm
Height
55mm
Weight (excl. battery)
0,495Kg
T-REX WARRANTY CONDITIONS
ABOUT T-REX
T-Rex offers a 2-year warranty on all our products. In the unlikely
event of a malfunction, please contact our technical support at
[email protected] before sending us the product for
repair. When the product has been sent to us at sender’s cost, we
will repair or replace your product and send it back to you - free
of charge and usually within 3 weeks (shipping not included).
The product needs to be accompanied by a copy of your receipt,
serial number, return address, phone number, e-mail address and
a brief explanation of the problem. Please note that we cannot
replace a product until we have received it here in Denmark.
Based in Vejle, Denmark, T-Rex Engineering makes classic and signature effects pedals for the world’s best musicians. Our approach
blends hi-tech innovation with old-world craftsmanship – always
in the service of killer tone.
The warranty is lost if the product has been damaged by alteration, misuse, accident, or neglect; or if the product has been
repaired or serviced by persons not authorized by T-Rex. Read
more about warranty conditions at www. t-rex-engineering.com.
EU REGULATIONS • ENVIRONMENT PROTECTION
T-Rex accepts and follows the regulations and directives issued by
the EU. Actually we find these environment protecting regulations
very good, and we are happy to follow them.
RoHS
REACh
ISSUED IN VEJLE, 2009
Steen Meldgaard Laursen
Managing Director
Lars Dahl-Jørgensen
Development Director
Sebastian Jensen
Production Director
T-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98
www.t-rex-engineering.com • mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement