Albis MATRIX-1000 1-S, 1-A, 2-S, 2-A mobile dust extractor User’s Manual
Below you will find brief information for mobile dust extractor MATRIX-1000 1-S, mobile dust extractor MATRIX-1000 1-A, mobile dust extractor MATRIX-1000 2-S. The MATRIX-1000 is a mobile dust extractor designed for cleaning air from dusts at welding posts. It can be used also for capturing other sorts of dust of relatively small emission of contamination (up to 10 cm³ a day). It features a cartridge filter with a teflon membrane, capturing very small fractions of dust, even smaller than 0,4 µm.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Filtro de aspiración Movil Matrix 1000
User’s Manual
Filtering unit MATRIX-1000-1-S
MATRIX-1000-1-A
MATRIX-1000-2-S
MATRIX-1000-2-A
Tel. 976 359 352 eMail. [email protected] www.aspiraciondehumos.com
KLIMAWENT
Centrum Techniki Wentylacyjnej filtering unit MATRIX-1000
Contents:
1. Introductory remarks.............................................................................3
2. Application ............................................................................................3
3. Reservations of Producer .......................................................................3
4. Technical Data.......................................................................................4
5. Structure and Function..........................................................................4
6. Assembly and Start ................................................................................5
7. Use ........................................................................................................6
8. Trouble Shooting Guide .........................................................................9
9. Maintenance and Repair ........................................................................9
10. Safety....................................................................................................9
11. Storage and Transport .........................................................................10
12. Terms of Warranty ...............................................................................10
2
filtering unit MATRIX-1000
1.
Introductory remarks
The purpose of the present User’s Manual is to give directions within the range of application, installation, start-up and the operational use of the filtering unit MATRIX-1000.
Installing, start up and operational use are exclusively admissible after getting acquainted with the contents of the User’s Manual.
With regard to continuity of works carried on improvement of our products, we reserve for ourselves the revision possibility of the draft and technological changes improving their functional features and safety.
The construction of MATRIX-1000 meets the requirements of the current state of technology as well as the safety and health assurances included in:
−
Machinery Directive 98/37/EC
−
Low-voltage Directive 06/95/EC.
The device has been constructed and manufactured on the basis of following standards:
PN-EN ISO 12100-1:2005
PN-EN ISO 12100-2:2005
– “Safety of machinery. Basic concepts, general principles for design. Part 1: Basic terminology, methodology”.
– “Safety of machinery. Basic concepts, general principles for design. Part 2: Technical principles”.
PN-EN 60204-1:2001
– “Safety of machinery. Electrical equipment of machines.
Part 1: – General requirements”.
2.
Application
MATRIX-1000 has been developed for cleaning the air from dusts at the mobile welding posts. The appliance can be used also for capturing other sorts of dust of relatively small emission of contamination (up to 10 cm³ a day).
Important is that the dust is dry and do not create explosion hazard.
Due to the applied cartridge filter with a teflon membrane, the device captures very small fractions of dust, even smaller than 0,4 µm.
3.
Reservations of Producer
A. Producer accepts no liability for any consequences following from the operational use that is in contradiction to the purpose of application.
B. It is unacceptable to install on the structure of the unit any additional elements not belonging to its normal construction or accessory set.
C. Any structural changes or modification of the unit made by User on one’s own are not permitted.
D. Protect the flexible elements as well as the pipes of the suction duct from mechanical damage.
E. Maintenance and any repair works can exclusively be carried out by an authorized person.
F. Neither use the device for conveying the air containing viscous compounds nor aggressive substances that would damage the filters, and dusts creating explosion hazard.
G. In the course of operational use, pay attention that any sources of ignition
i.e. glowing cigarettebutts would not get into the filtering chamber.
KLIMAWENT
Centrum Techniki Wentylacyjnej
3
KLIMAWENT
Centrum Techniki Wentylacyjnej
4.
Technical Data
Table No.1 type
filtering unit MATRIX-1000
Part.No mode of control volume flow motor rate supply voltage noise level weight quantity and type of the applied extraction arms
[m³/h] [kW] [V] [dB(A)] [kg]
MATRIX-1000-1-S 800O28 manual 1000 0,75 230 66 85 1 x ERGO-L/Z-2-R
MATRIX-1000-1-A 800O29 autom.
1000 0,75 230 66
MATRIX-1000-2-S 800O30 manual
2x500 0,75 230 67
85 1 x ERGO-L/Z-2-R
88 2 x ERGO-L/Z-2-R
MATRIX-1000-2-A 800O31 autom. 2x500 0,75 230 67 88 2 x ERGO-L/Z-2-R
Caution:
1. Weight of the device along with the ERGO extraction arm
- MATRIX-1000-1 99 kg
- MATRIX-1000-2 110 kg
2. Maximum vacuum amounts 2600 Pa
3. Filtration efficiency – 99,5%.
5.
Structure and Function
MATRIX-1000 consists of subsequent elements:
●
housing – polyester-glass composite
●
radial fan – zinc-coated steel sheet
●
cartridge filter – polyester, coating of teflon membrane
●
rotary jets – to regenerate the cartridge filter
●
support – to install the ERGO extraction arm – (for MATRIX-1000-2 two supports)
●
control unit (version for manual or automatic control)
●
castor assembly – to displace or turn the device
●
vacuum cleaner.
MATRIX-1000-1 is designed for installing one extraction arm of diameter Ø160 and workrange 2 meters (ERGO-L/Z-2-R) and as standard it is designed for extraction at one welding station (see Phot. No.1).
MATRIX-1000-2 is adapted for two extraction arms of diameter Ø160 and workrange 2 meters (ERGO-L/Z-2-R).
This version is appropriate for applications in non-constant cases for low intensive welding (ie. for schooling purposes)
MATRIX-1000 is executed in two control options.
In the standard version the fan has to be operated manually. Whereas, in the automatic version, a fter the appliance is switched on manually, first the electromagnetic valve opens automatically (supplying the compressed air to the rotary jets), subsequently
– after several seconds the fan is being switched on automatically.
4
filtering unit MATRIX-1000
Dwg. No.1 – MATRIX-1000 – main view
6.
Assembly and Start
MATRIX-1000 requires connection to the external compressed air installation of pressure at least 0,6 MPa. The pressure hose ought to be of 16 mm diameter.
Energizing with 230V power proceeds through a 5 meters’ supply cable with a plug.
Prior to operational use, it is important to put the MATRIX at a place near the workplace. Subsequently, set the hood of the ERGO extraction arm in distance
20 – 30 cm from the emission of pollution.
To start the device use the switch installed in the lower part of the housing of the compartment for vacuum cleaning accessories.
In standard version the fan is operated immediately after the device is switched on, whereas, in the automatic version, the fan starts in 3 seconds (in the meanwhile the filter is regenerated).
KLIMAWENT
Centrum Techniki Wentylacyjnej
5
KLIMAWENT
Centrum Techniki Wentylacyjnej
7.
Use
Application of the device at a mobile welding post – see Phot. No.1. filtering unit MATRIX-1000
Phot. No.1
In the filter regeneration process, the dusts accumulated on the outer surface of the filter are periodically struck by the rotary jets.
Standard version (MATRIX-1000-1-S and MATRIX-1000-2-S) – when the flow efficiency drops – switch off the device, wait until the fan impeller stops rotating, subsequently, open the ball valve of the compressed air installation, slide the lance with rotary jets up and down – Phot. No.2 (the lance is placed in the filter cover).
System of manual filter cleaning
Phot. No.2
6
System of automatic filter cleaning
Phot. No.3
filtering unit MATRIX-1000
Automatic version (MATRIX-1000-1-A and MATRIX-1000-2-A) – when the flow efficiency drops – switch off the device, in two seconds switch it on.
The cleaning proceeds automatically (the filters are blown through by eight rotary jets – Phot. No.3).
The dust accumulated in the lower part of the filtration chamber ought to be removed periodically by means of a vacuum cleaner (attached to the device).
In order to do this, remove the cover along with the lance (open the 4 clasps), and subsequently pull out the filter (see Phot. No.4).
In case of automatically controlled deice MATRIX-1000-A, first take off the coil of the electromagnetic valve with the hose (open the hook and take off the coil) and then open the clasps.
Phot. No.4
Sorts f the vacuum cleaner nozzles – see Phot. No.5
KLIMAWENT
Centrum Techniki Wentylacyjnej
7
KLIMAWENT
Centrum Techniki Wentylacyjnej filtering unit MATRIX-1000
The vacuum cleaning hose along with the accessories is placed in a compartment which is under the vacuum cleaner.
Having taken off the vacuum cleaner, connect it to the 230V socket (near the fan switch) – see Dwg. No.1.
The dust is accumulating in a single-use bag of the vacuum cleaner.
For the dust cleaning inside the device – see Phot. No.6.
Phot. No.6
The vacuum cleaner can also be used for cleaning the workplace, after the nozzle is changed – see Phot. No.7.
Phot. No.7
After the work is completed, put the hose into the compartment, and the pipes with nozzles place in sockets on both sides of the compartment.
8
filtering unit MATRIX-1000
Having placed the vacuum cleaner on the compartment, fasten it additionally to the magnetic holder.
8.
Trouble Shooting Guide
problem possible reason corrective action
1. The suction efficiency The net of the nozzle is dirty Clean the net or replace is gradually decreasing. (the net mesh is clogged). it nor a new.
The filter is not penetrable. Clean the filter
– see Section 7.
2. Sudden vibrations of the Balance loss. fan are occurring. Impeller damage.
3. The ERGO extraction arm is dropping.
Carry out the balancing.
Replace the impeller.
Improperly adjusted frictional Increase the pressure of the brake. frictional disc of the brake by tightening the adjustment nuts.
4. Inefficient filtration The lower sealing of the filter Check the tightness of the
- smoky air is getting out is not tight to the bottom of sealing, remove the eventual into the room. the partition of the filtration chamber. pollution between the sealing and the bottom.
5. Noise (whistle) of the air
Weak clamping force of the right beneath the filter filter cover onto the upper cover sealing of the filter.
Tighten the clamp yokes until the right tightness of the sealing is gained.
9.
Maintenance and Repair
Every 12 months check the technical state of the fan, according to the principles of the operational use of the electrical driving devices.
Replace the cartridge filter every 12 – 24 months, depending on the intensity of the operational use.
The maintenance of the ERGO extraction arm consists in following steps executed periodically:
●
In case when the joint system is losing its self-supporting properties
– undertake their adjustment (according to the rules referring the states of failure of the ERGO extraction arms).
●
Lubricate periodically the swivel, using solid grease by pressing it into the lubrication nipple placed on the swivel flange).
Servicing of the device is carried out by C.T.W. KLIMAWENT ul. Chwaszczy ń ska 194, phone: +48 (58) 629 64 80
10.
Safety
For the safety reasons, connect the device to the power supply according to the being in force regulations within the range of personal protection against the electrical shock and the short-circuit- and overload effects.
Any connection works ought to be executed by a qualified person.
Prior to opening the control unit housing, disconnect the device from the power supply.
User can have access to the connection box (A1) by tilting the whole device, and unscrewing the four screws (see schemes – placement of elements).
ERGO extraction arms shall not cause any hazard, provided they are stably installed on the housing of the filtering unit.
KLIMAWENT
Centrum Techniki Wentylacyjnej
9
KLIMAWENT
Centrum Techniki Wentylacyjnej filtering unit MATRIX-1000
Having completed the work, leave the extraction arm in the ultimate operational position, in case when it constitutes obstacle to personnel/User set in into the home position.
During the operational use, follow the general rules of safety and labor hygiene.
11.
Storage and Transport
The device ought to be stored in a dry and well ventilated room. The space should be free from aggressive substances.
During the transport protect the device from overturn and an uncontrolled displacement.
The transport / reloading ought to eliminate the hazard of damage, scratching, indents of the housing. Pay attention that the packages would not get damaged, and the markings on the surface would not get obliterated or detached.
12.
Terms of Warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”. The warranty does not comprise:
●
defects and damages arising during the incorrect use and in application that is inconsistent with the present manual,
●
mechanical damages caused by User.
●
structural modifications, or changes / adaptations introduced by User on one’s own,
●
mechanical damages being caused during improper storage and transport or incorrect maintenance,
●
inefficiency following from the normal operational exhaustion.
In case the rules of the present User’s Manual are not followed, the warranty is losing the validity.
10
filtering unit MATRIX-1000
Dwg. No.2 Dimensional drawing
KLIMAWENT
Centrum Techniki Wentylacyjnej
11
1
0724-MATRIX-1000-1-S – 001/12.2008/EN
0776-MATRIX-1000-1-A – 001/12.2008/EN
0777-MATRIX-1000-2-S – 001/12.2008/EN
0778-MATRIX-1000-2-A – 001/12.2008/EN
advertisement
Key Features
- Mobile design for easy movement
- Cartridge filter with teflon membrane
- High filtration efficiency (99.5%)
- Automatic or manual filter regeneration
- Built-in vacuum cleaner for dust removal
- Adjustable extraction arm for optimal positioning
- Compressed air connection for filter cleaning
- 230V power supply