Poweramp AP Series dock leveler Owner’s/User’s Manual

Below you will find brief information for dock leveler AP Series. The AP dock leveler is an air-powered dock leveler with a single button operation for ease of use. The dock leveler can be operated remotely using the RAISE button on the control panel, which activates the electric blower motor. The blower forces air into the air bag, causing the platform to rise. Releasing the RAISE button allows the platform to lower. The AP dock leveler is designed to compensate for a maximum ± 12 in. of height difference between the loading dock and the transport vehicle bed.

PDF Download
Document
Poweramp AP Series Dock Leveler Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Air-powered operation
  • Single button operation
  • Remote operation via control panel
  • Compensates for height differences (±12 in.)
  • Lip latch assembly locks lip in extended position
  • Safety legs for below-dock position
  • Toe guards for added protection
  • Minimal maintenance required

Frequently asked questions

To raise the platform, depress and hold the RAISE button on the control panel. To lower the platform, release the RAISE button.

The AP dock leveler is designed to compensate for a maximum ± 12 in. of height difference between the loading dock and the transport vehicle bed.

The AP dock leveler includes safety legs for the below-dock position and toe guards for added protection.

The AP dock leveler requires minimal maintenance. Refer to the Owner's/User's Manual for specific maintenance instructions.

Yes, but only if the height difference is no more than ± 12 in.
Preparing document for printing…
0%