Topfield CRC-2400 User manual

TOPFIELD
TRC-1400
User Reference
High Definition
Digital Terrestrial Receiver
Personal Video Recorder
CONAX Chipset Pairing
ii
The lightning flash with arrowhead symbol, in an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to a person.
The exclamation point, in an equilateral triangle, is intended to alert the user to the presence of
important operation and maintenance instructions in the literature accompanying the product.
Precautions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Read, keep and follow these instructions.
Heed all warnings.
Clean with a dry cloth only.
Do not block any of the ventilation openings.
Do not install near any heat sources or in direct sunlight as this will impair cooling.
Do not operate this product near water. Do not place any of the objects filled with liquids, such as
vases on this unit.
Do not try to change the plug or defeat its safety purpose. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
This product is designed for indoor use only.
Place the digital receiver on a firm and level surface.
Do not lay any objects such as magazines on this unit.
Do not overload power outlets. Doing so may result in a risk of fire or electrical shock.
Never open this unit’s casing under any circumstances, or the warranty will be void.
Unplug this unit during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the unit has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the unit, the unit became wet from rain or moisture, does not operate
normally, or has been dropped.
Batteries, including those which contain no heavy metals, may not be disposed with other
household wastes. Please dispose of used batteries in an environmentally sound manner. Find
out the legal regulations which apply in your area.
iii
About this user guide
Thank you for purchasing our digital receiver. Please read this user guide carefully before you use the
digital receiver and keep it handy for future reference.
This User Guide covers the model TRC-1400 .
• Illustrations pictured in this manual may not be exactly the same as the actual product.
• The screenshots used in this manual may not be exactly the same as those you see on the actual
on-screen displays.
• Designs and specifications of the digital receiver and other accessories are subject to change without any notice in order to introduce new features or improve the functionality of the product.
iv
CONTENTS
Contents
Contents
1
2
3
Introduction
1.1 Features . . . . . . . . . . . . .
1.2 Controlling the digital receiver .
1.2.1 Front panel . . . . . . .
1.2.2 Remote control . . . . .
1.3 Subscription card information .
iv
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1
1
2
3
4
6
Setup
2.1 Unpacking . . . . . . . . . . . . . . . . . .
2.2 Safety precautions . . . . . . . . . . . . . .
2.3 Rear panel connections . . . . . . . . . . .
2.4 Connecting up your digital receiver . . . .
2.4.1 Connecting to the antenna . . . . .
2.4.2 Connecting to your television set .
2.4.3 Connecting to your video recorder
2.5 Switching on for the first time . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7
7
7
8
10
11
11
14
14
.
.
.
.
16
16
17
18
18
.
.
.
.
.
.
.
.
.
.
Service Search
3.1 Searching for broadcasting services
3.2 Resetting to factory settings . . . .
3.3 Resetting to user settings . . . . . .
3.4 Clearing the services list . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
CONTENTS v
4
5
6
Preference Settings
4.1 Language settings . . . . . . . . .
4.1.1 Menu language . . . . . .
4.1.2 Teletext Language . . . . .
4.1.3 Subtitle language . . . . .
4.1.4 Hard of Hearing . . . . .
4.1.5 Changing region . . . . .
4.1.6 Audio language . . . . . .
4.2 Video and audio settings . . . . .
4.2.1 High definition television
4.2.2 Television aspect ratio . .
4.2.3 Colour format . . . . . . .
4.2.4 Another video device . . .
4.2.5 Audio mode . . . . . . . .
4.3 Local time setting . . . . . . . . .
4.4 Parental control . . . . . . . . . .
4.5 Options for recording . . . . . . .
4.6 Options for playback . . . . . . .
4.7 Options for on-screen display . .
4.8 Options for the front display . . .
4.9 Options for Photo Album . . . . .
4.10 Options for standby mode . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
20
20
21
21
21
21
21
22
22
23
24
24
25
26
27
29
30
31
32
32
33
Every Day Use
5.1 Volume control . . . . . . . . . . . . . .
5.2 Watching television . . . . . . . . . . . .
5.2.1 The services list . . . . . . . . . .
5.2.2 The favourite service lists . . . .
5.2.3 Viewing programme information
5.2.4 Selecting audio tracks . . . . . .
5.2.5 Selecting subtitle tracks . . . . .
5.2.6 Viewing teletext . . . . . . . . . .
5.3 Viewing electronic programme guide . .
5.4 Using time-shift . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
34
34
34
34
35
36
37
37
38
38
39
Organising Services
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
vi
CONTENTS
6.1
6.2
7
8
Editing the favourite lists . . . . . . . . . . . . . . . . . . . . .
How to use on-screen keyboard . . . . . . . . . . . . . . . . .
41
43
Recording and Playback
7.1 Recording a programme . . . . . . . . . . . . . . . . . . . .
7.1.1 Instant recording . . . . . . . . . . . . . . . . . . . .
7.1.2 Timer recording . . . . . . . . . . . . . . . . . . . . .
7.1.3 Scheduling recordings using the programme guide .
7.1.4 Recording a time-shifted programme . . . . . . . . .
7.1.5 Recording a pay service programme . . . . . . . . .
7.2 File archive . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2.1 To delete a recording . . . . . . . . . . . . . . . . . .
7.2.2 To sort recordings . . . . . . . . . . . . . . . . . . . .
7.2.3 To lock a recording . . . . . . . . . . . . . . . . . . .
7.2.4 To rename a recording . . . . . . . . . . . . . . . . .
7.2.5 To make a new folder . . . . . . . . . . . . . . . . . .
7.2.6 To move a recording to another folder . . . . . . . .
7.3 Playing back a recording . . . . . . . . . . . . . . . . . . . .
7.3.1 To navigate using the progress bar . . . . . . . . . .
7.3.2 To play in slow motion . . . . . . . . . . . . . . . . .
7.3.3 To play in fast motion . . . . . . . . . . . . . . . . . .
7.3.4 To make a bookmark . . . . . . . . . . . . . . . . . .
7.3.5 To play back a recording repeatedly . . . . . . . . .
7.3.6 To play back recordings in sequence . . . . . . . . .
7.3.7 To play back a scrambled recording . . . . . . . . . .
7.4 Copying a recording . . . . . . . . . . . . . . . . . . . . . .
7.5 Formatting the hard disk . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
44
45
45
47
49
49
50
51
51
51
52
52
52
52
52
53
54
54
54
55
55
56
56
56
Entertainment
8.1 Configuring the network setting . . . . . . . .
8.2 Copying files . . . . . . . . . . . . . . . . . . .
8.3 Playing back MP3 files . . . . . . . . . . . . .
8.4 Viewing image files . . . . . . . . . . . . . . .
8.4.1 How to move a file to the photo album
8.5 Playing back a video file . . . . . . . . . . . .
8.6 Playing back YouTube contents (optional) . .
.
.
.
.
.
.
.
58
58
59
59
60
60
61
62
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
CONTENTS vii
8.7
8.8
8.9
9
Sharing image files by Flickr (optional) . . . . . . . . .
63
SHOUTcast Internet radio (optional) . . . . . . . . . . . . . . 64
Weather forecast (optional)
. . . . . . . . . . . . . . . 65
Firmware Update
9.1 From a memory stick . . . . . . . . . . . . . . . . . . . . . . .
9.2 Over the air (optional) . . . . . . . . . . . . . . . . . . . . . .
66
66
67
A Universal Remote Control
A.1 Code list for television sets . . . . . . . . . . . . . . . . . . . .
A.2 Code list for DVD players . . . . . . . . . . . . . . . . . . . . .
A.3 Code list for audio-video receivers . . . . . . . . . . . . . . .
68
71
85
87
Chapter 1
Introduction
The TRC-1400 digital receiver is fully compliant with the international Digital Video Broadcasting (DVB) standard, and thus
is able to receive digital broadcasts of that standard. For its
operation you need an antenna, which must be installed appropriately.
NOTE
In general we equate a channel with a frequency. However,
unlike analogue broadcasts, digital broadcasts are not all
assigned to their own frequencies; instead, multiple television broadcasts are transmitted through a single frequency.
The frequency in digital broadcasting is usually called transponder or multiplex. To reduce confusion in this manual,
the word service is preferably used than channel as a term
to indicate one television or radio broadcast.
1.1
Features
This digital receiver has the following features:
• Can store up to 2,000 television and radio services.
• Can create lists of your favourite services.
1 Introduction
1
2
Introduction
• Can view information about the current television or radio programme.
• Has an electronic programme guide that provides an
overview of scheduled programmes.
• You can record up to four services while you are currently watching another.
• You can record many programmes using a built-in hard
drive with large storage capacity.
• Time-shift is a special technical feature available on this
digital receiver. You can pause a programme you are
watching and resume it again at a later time. Then you
can quickly go to any part of the current programme by
fast forward or rewind search.
• You can play back video files of various formats including Xvid.
• You can use various Web services including YouTube.
(optional)
1.2
Controlling the digital receiver
You can operate the digital receiver with the remote control or
the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall
socket, we say that it is in standby mode; on the other hand,
when it is on, it is in active mode. Even when you are not
using the digital receiver, you should keep it plugged into
a wall socket to be in standby mode so that it can run timer
events at any time.
1.2.1 Front panel
Power button switches the digital receiver between standby
and active mode.
MENU button displays the main menu. It is also used to return
to the previous menu from a submenu.
OK
button displays the services list. See §5.2.1 for more details. It is also used to select a menu item.
,
CHANNEL
vice.
VOLUME
,
buttons switch to the previous or next serbuttons decrease or increase the volume.
You have to insert your subscription
card into the front slot to watch pay
services. When you insert the subscription card, the side on which the chip is
mounted must face upward.
1 Introduction
1.2 Controlling the digital receiver 3
4
Introduction
1.2.2
Remote control
•
button switches the digital receiver between standby
mode and active mode.
•
mutes the sound. Press again to switch it back on.
• TV switches the remote control to television mode to operate your television.
• PVR switches the remote control to receiver mode to operate the digital receiver.
• AUX switches the remote control to operate your audiovideo receiver.
• DVD switches the remote control to DVD mode to operate your DVD player.
• Numeric buttons are used to enter a service number for
service change or to specify values for menu options.
•
switches over between the current service and the
previously viewed one.
•
displays the service information box. It is also used
to display more information about a programme.
• VOLUME− , VOLUME+ buttons decrease or increase the
volume.
• CHANNEL− , CHANNEL+ buttons switch to the previous
or next service.
• OK displays the services list. See §5.2.1 for more details.
It is also used to select a menu item.
• Navigation buttons are used to navigate in menus or to
change values for menu options.
• MENU displays the main menu. It is also used to return
to the previous menu from a submenu.
• GUIDE displays the electronic programme guide.
• EXIT is used to exit a menu or to hide on-screen information.
•
is used to display the list of recorded programmes
that are stored in the internal hard drive. See §7.2 for
more details.
• F1 has different functions per menu.
• F2 is used to make a bookmark on playback or timeshift.
• F4 has different functions per menu.
• F3 is used to jump to next bookmark position.
• Option has different functions per menu.
•
is used to select a subtitle track.
•
is used to select an audio track and a sound mode.
•
displays teletext.
• VF changes video resolution. See §4.2.1 for more details.
• AR changes aspect ratio. See §4.2.2 for more details.
•
switches over between television services and radio
services.
•
is used to set a sleep timer in 10 minute increments.
•
is used to start recording.
•
is used to stop playback, to stop recording, or to jump
back to live television from time-shifted television.
• M switches the output of the TV SCART socket over between the digital receiver and the device connected to the
VCR SCART socket. See §4.2.4 for more details.
• SAT displays connected devices list.
•
is used to start reverse playback. Subsequent presses
increase the rewind speed.
•
pauses live television or playback of a recorded programme.
•
is used to start fast forward playback. Subsequent
presses increase the playback speed.
1 Introduction
1.2 Controlling the digital receiver 5
6
Introduction
•
resumes normal playback speed, or displays the
progress bar for navigation on playback or time-shift. To
.
play a recorded programme, see button
•
is used to jump back to the beginning of the recording
on playback.
•
is used to start slow motion playback. Subsequent
presses change the playback speed.
•
is used to jump to the end of the recording on playback.
•
has different functions per menu.
NOTE
When using the remote control, point it at the remote sensor
on the front panel of the digital receiver.
The actual images and the number of buttons may be different depending on the type of remote control provided by the
manufacturer.
1.3
Subscription card information
With this digital receiver, you can view pay services scrambled with the CONAX conditional access system. Probably
you have a subscription card. If you would like to view information in detail about your subscription card, select the Information > Conditional Access menu. There you can also check
the messages from the broadcasting operator.
7
2 Setup
Chapter 2
Setup
2.1
Unpacking
Before going any further, check that you have received the following items with the digital receiver.
•
•
•
•
•
Remote control
Two batteries for the remote control (AAA 1.5 V)
One HDMI cable
One loop cable
A copy of the User manual
NOTE
Accessories may vary according to your local area.
2.2 Safety precautions
Please read carefully the following safety precautions.
• The mains voltage must range between 90 and 250 volts.
Check it before plugging the digital receiver to the wall
socket. For the power consumption of the digital receiver, refer to Table 2.1.
8
Setup
• The wall socket should be near the equipment. Do not
run an extension lead to the unit.
• The mains plug shall remain readily operable so that it
can be removed easily to disconnect the power.
• When placed in a cabinet, make sure there is a minimum
space of 10 centimetres around it. For the physical specification of the digital receiver, refer to Table 2.2.
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and
get the cord replaced.
• Refer all servicing to a qualified service technician.
• To maintain proper ventilation, always leave sufficient
space around the digital receiver.
Table 2.1: Power specification
Input voltage
Power consumption
90 to 250 V AC, 50/60 Hz
30 W at maximum in active
Under 1 W in passive standby
Table 2.2: Physical specifications
Size
Weight
Operating temperature
Storage relative humidity
2.3
340× 60× 265 mm
2.6 ~ 3.1 kg (may vary by HDD kind)
0 to 39 ◦ C
5 to 90 %
Rear panel connections
The TRC-1400 has a wide range of connections on the back.
2.3 Rear panel connections
3
5
8
11
13
/
2
4
6
7
9
10
12
Check what connections your television set has in comparison
with the digital receiver.
1 ANT 1 IN
Terrestrial broadcasting signal input socket
for the first tuner
(5V, Max.100mA)
2 ANT 1 OUT Terrestrial broadcasting signal output socket
through the first tuner
3 ANT 2 IN
Terrestrial broadcasting signal input socket
for the second tuner
4 ANT 2 OUT Terrestrial broadcasting signal output socket
through the second tuner
5 AUDIO L/R Stereo audio output socket for the television set or the audio-video receiver (white/red)
6 VIDEO
Composite video output socket for the television set (yellow)
7 S/PDIF
Digital audio output socket for the audiovideo receiver
8 TV
Audio and video output socket for the television set
9 VCR
Audio and video input/output socket for
another device such as a video recorder
10 HDMI
Audio and video output socket for the high
definition television set
11 LAN
Local area network port
12 USB
USB port for firmware update and data transfer.
2 Setup
1
9
10
Setup
13. ON/OFF
.
Power switch (You have to turn on this switch
first to use this digital receiver.)
Table 2.3: Connectors specifications
HDMI
TV
VCR
VIDEO
AUDIO
S/PDIF
USB
LAN
2.4
High definition video output
Left & right audio output
Digital audio output
CVBS/S-Video video output
Left & right audio output
CVBS video output
Left & right audio output
CVBS/S-Video video input for bypass
Left & right audio input for bypass
Composite video (CVBS) output
Left & right audio output
Digital audio output
2.0 Host (5 V DC, 500 mA max.)
10/100 Ethernet
Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up the
digital receiver suitably to your television and other devices.
If you have any problem with your setup or need help, contact
your dealer.
WARNING
Connect any components before plugging the power cord
into the wall outlet. Always turn off the product, TV and
other components before you connect or disconnect any cables.
NOTE
If you encounter any problems setting up your product,
please contact your local retailer.
2.4 Connecting up your digital receiver 11
Connecting to the antenna
Whatever sort of connection you have between the digital receiver and the television,
you need to connect the digital receiver to the
antenna so that it can receive digital television broadcasts. Connect the antenna cable
to the ANT 1 IN connector on the back panel
of the digital receiver.
Also, you must ensure that there is a connection to both the ANT 1 IN and ANT 2 IN connectors on your digital receiver, so that both
tuners work properly.
Normally you do that by using a loop cable to link from the
ANT 1 OUT connector to the ANT 2 IN connector.
NOTE
However, if you are in a weak signal area or are using a signal amplifier with more than one output, you may achieve
better results by connecting a cable from the antenna or the
amplifier directly to the ANT 2 IN connector rather than using the loop cable.
If you have another digital receiver, you may link it from the
ANT 2 OUT connector.
NOTE
ANT 2 OUT may also be linked to your television, VCR, or
DVD recorder to loop an analogue signal.
2.4.2
Connecting to your television set
For all the following connections of the digital receiver, we recommend you to use the first connector to get the best picture
quality. If your television does not have a matching connector,
2 Setup
2.4.1
12
Setup
then use the next connector in the following order for a better
picture quality.
1. HDMI connector (HDMI)
2. SCART connector (TV)
3. Composite connector (VIDEO)
You should configure audio and video settings after connecting up the digital receiver. See §4.2 for a detailed description.
To use the HDMI output
If you have a high definition television set,
you should use an HDMI cable for best results. Plug one end of the cable into the HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television. In this case, you do not have to
make audio connection because it can output
stereo audio or digital audio as well.
In this case, you do not have to make audio connection because
it can output stereo audio or digital audio as well.
To use the SCART output
For best results with a standard television set,
you should use a SCART cable. Plug one end
of the cable into the TV socket on the digital
receiver, and plug the other end into a free
SCART socket on your television.
If you connect with a standard SCART cable, you do not have
to make audio connection because it can output stereo audio
as well. But if you use a conversion cable such as SCART-toComponent, then you have to make audio connection.
2.4 Connecting up your digital receiver 13
You cannot view high definition video by means of the
SCART output.
To use the Composite video output
You need to obtain a Composite video cable
(RCA cable) to use the Composite video output. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket
on your television.
NOTE
You cannot view high definition video by means of the Composite video output.
To make the audio connection
You need to obtain an audio cable (RCA cable) to link the audio connectors. Plug one
ends of the cable into the AUDIO L (white)
and AUDIO R (red) sockets on the digital receiver, and plug the other ends into
the matching sockets on your television or
audio-video receiver.
To enjoy Dolby Digital audio, your television
or audio-video receiver must be able to decode Dolby Digital audio, and you need to
obtain an S/PDIF cable.
Plug one end of the cable into the S/PDIF
socket on the digital receiver, and plug the
other end into the matching socket on your
audio-video receiver.
2 Setup
NOTE
14
Setup
2.4.3
Connecting to your video recorder
The digital receiver can also output video through an auxiliary
SCART connector to another device such as a video recorder.
You need to obtain a SCART cable to link the
auxiliary SCART connector. Plug one end
of the cable into the VCR socket on the digital receiver, and plug the other end into the
matching socket on your video recorder or
suchlike.
2.5
Switching on for the first time
Now that you have your digital receiver connected, you should
plug it into a wall socket. Ensure that your television set is
turned on and on the correct video channel so that you will be
able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert batteries into the remote control. Open the battery compartment
by removing the lid, and then insert the batteries observing the
polarity, which is marked on the base of the battery compartment.
Press the
button on the top left corner on the remote control. In a little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the VF button on the
remote control. If after several tries you still get no picture,
check that the television is set to the correct input. If the picture
is good, you can skip to §3.1 to search for available television
and radio services. Otherwise, you may need to temporarily
connect the Composite video connector (VIDEO) to your television set so that you can see the menu in order to configure
the video settings.
2.5 Switching on for the first time
15
If the digital receiver no longer reacts properly to the remote
control commands, the batteries may be flat. Be sure to replace only with 1.5 V AAA size batteries, and observe the
following precautions.
• Do not mix different types of batteries, or new and old
batteries.
• Do not use rechargeable batteries.
• Do not recharge the old batteries.
• In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment.
• Do not subject to excessive heat such as the sun and
fire.
• If you are not using the remote control for a long period of time, remove the batteries. The manufacturer
accepts no liability for the damage resulting from leaking batteries.
• Batteries, including those which contain no heavy
metals, may not be disposed with other household
wastes. Please dispose of used batteries in an environmentally sound manner. Find out the legal regulations
which apply in your area.
2 Setup
CAUTION
16
Service Search
Chapter 3
Service Search
After connecting up the digital receiver, you will need to perform a service search.
NOTE
If there is no service stored, you will be not able to access all
menus. A  is another name for a .
3.1
Searching for broadcasting services
To perform service search, select the Installation > Searching
menu. You should see a screen
like the left figure. If you have an
antenna booster, you should set
the Antenna Supply 5V option to
On to supply power to it.
3.2 Resetting to factory settings
17
You may choose to only search for the services of a specific
transponder since more than one service are provided via each
transponder. Set the Search Mode option to Manual, then select your desired transponder at the Channel option. The number ranges from 5 to 12 (or D to H) in VHF and 21 to 69 in UHF.
You may need to set the Modulation option to match to that of
your desired transponder. If the transponder is of the DVB-T2
standard, you should set it to DVB-T2.
It is possible to search single service in a certain transponder
only if you know the desired service’s audio and video packet
identification (PID). Set the Search Mode option to Advanced,
then the PID option becomes enabled. Specify the PIDs of your
desired service with the numeric buttons.
The digital receiver can check and notify if there is updated
services list. Set the Automatic channel list update option to
On if you want the unit to keep you updated on new services.
A pop-up message will appear when there are new services detected. With the choice of Yes you will be moved to the service
search screen automatically. If you prefer to check for updates
manually, turn this option Off.
To start service search, move down to the Start Search item,
and press the OK button. The digital receiver will start to
search for services and display a list of television and radio
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is complete, you will see a message telling you how many services
have been found. Press the OK button to save the list.
3.2
Resetting to factory settings
The digital receiver maintains the following data:
• Services list
3 Service Search
You should set the Search Mode option to Auto for the first
time after connecting up the digital receiver, then the digital
receiver will search for all available services.
18
Service Search
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Installation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
preference options will be reset to the manufacturer’s factory
settings.
NOTE
A factory reset will not delete any recorded programmes.
However, you have to search services again after a factory
reset.
3.3
Resetting to user settings
You can store your own data including the following:
• Services list
• Favourite lists
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery >
Store System Data menu, then you get asked for confirmation.
If you select Yes, your data will be stored. Whenever you store
your data, they are all overwritten. To restore your data, select
the Installation > System Recovery > Recover System Data
menu, then you get asked for confirmation. With the choice of
Yes, your data will be restored.
3.4
Clearing the services list
If you only want to clear the services list, select Installation >
System Recovery > Reset Service List , then you get asked for
3.4 Clearing the services list
19
3 Service Search
confirmation. With the choice of Yes, the services list will be
cleared. After this, you have to do service search again.
20
Preference Settings
Chapter 4
Preference Settings
4.1
Language settings
You can select the language in
which the menu will be displayed. In addition to that, you
can select the language of audio
track and of subtitle track. Select
the Settings > Language menu.
You should see a screen like the
left figure.
4.1.1
Menu language
The digital receiver provides menus in several different languages. Set the Menu Language option to your desired language. Once you select a language, the menu will be immediately displayed in the selected language.
4.1 Language settings
4.1.2
21
Teletext Language
4.1.3
Subtitle language
Set the 1st Subtitle Language option and the 2nd Subtitle Language option to your desired languages. When you watch a
programme, if the programme has a subtitle track of the language that is specified for the 1st Subtitle Language, it will be
displayed. If the first language is not available but the second
language is available, the subtitle of the second language will
be displayed. If there is no available language, no subtitle will
be displayed.
Apart from this setting, you can select a subtitle track with the
button. See §5.2.5 for a detailed description.
4.1.4
Hard of Hearing
Some broadcasters may send a subtitle track dedicated to the
hard-of-hearing. Even when a subtitle track or more is available, that subtitle track will be displayed prior to those you
have specified for the 1st Subtitle Language and the 2nd Subtitle Language options if the Hard of Hearing option is set to
On.
4.1.5
Changing region
If you want to change the country, set the Region option to your
desired region. When you search services, the digital receiver
will search the nearest broadcasting services in your selected
region.
4.1.6
Audio language
Set the 1st Audio Language option and the 2nd Audio Language option to your desired languages. When you watch a
4 Preference Settings
Set the Teletext Language option to your desired language.
The teletext pages of the selected langauge will be displayed
if available when you open teletext.
22
Preference Settings
programme, if the programme has an audio track of the language that is specified for the 1st Audio Language, it will be
output. If the first language is not available but the second language is, the audio of the second language will be output.
Apart from this setting, you can select an audio track with the
button. See §5.2.4 for a detailed description.
4.2
Video and audio settings
You have to configure the video
and audio settings appropriately
for your television set and other
devices. Select the Settings >
A/V Output menu. You should
see a screen like the left figure.
4.2.1
High definition television
The digital receiver supports various video resolutions from
576 to 1080. In general, a resolution of 720 or more is considered high definition. The higher the resolution is, the better
the quality is. However, if your television set does not support high definition, you cannot enjoy high definition quality
picture.
If your television set does not support high definition, set the
HD Output option to SD. Otherwise, set it to HD.
Set the Video Format option as you desire. If you set this option to 576P, the digital receiver will present even high definition programmes in resolution of 576. On the contrary, if you
set it to 1080I, the digital receiver will present even standard
definition programmes in resolution of 1080.
4.2 Video and audio settings
23
When you want to watch television via the HDMI output, if
your television cannot handle the video input with High Definition Copy Protection (HDCP), you should set the HDCP option to Off.
NOTE
You can enjoy only standard definition video with the following video outputs:
• Composite video output (VIDEO)
• SCART output (TV)
4.2.2
Television aspect ratio
If you have a wide-screen television, set the TV Aspect Ratio
option to 16:9.
You can enjoy both wide-screen programmes and normalscreen programmes with your wide-screen television as the
above figures show. To watch normal-screen programmes
in full screen like the left figure, set the Display Format option
to Full. Normal-screen pictures then will be inflated to fit to
the width of the wide screen. Otherwise, to watch them in the
4 Preference Settings
It is recommended to set it to Original Format if you have a high
definition television. With that setting the digital receiver will
present a programme as it is without any resolution conversion. While watching television you can change the resolution
with the VF button. Whenever you press it, the video resolution is changed in turn.
24
Preference Settings
original ratio like the right figure, set it to Center. If you have
a normal-screen television, set the TV Aspect Ratio option to
4:3.
You cannot fully enjoy wide-screen programmes with your
normal-screen television as the above figures show. The left
figure shows a normal picture displayed in the normal screen.
To watch wide-screen programmes in the shape like the centre figure, set the Display Format option to Letter Box. Widescreen pictures then will be reduced to fit to the width of the
normal screen. Otherwise, to watch them in the shape like the
right figure, set it to Center extract. Then wide-screen pictures
will be cut out on the left and right sides equally to fit to the
width of the normal screen.
4.2.3
Colour format
Through the TV SCART output, the digital receiver is able to
output video in various colour formats. If you have the digital
receiver linked to your television via this output, you should
set the SCART Output option to your desired colour format.
If you have connected via the RCA socket labeled VIDEO on
the back panel, you do not have to set this option because the
digital receiver outputs CVBS video through that RCA output
independently of the SCART output.
4.2.4
Another video device
You can have the digital receiver linked to another video device like a video recorder or a DVD player via the VCR SCART
output. In this case, the digital receiver will operate differently depending on the setting of the VCR SCART Type op-
4.2 Video and audio settings
25
4.2.5
Audio mode
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
button. See §5.2.4 for a detailed description.
the
The digital receiver can output two types of digital audio signals via the S/PDIF output. One is an encoded signal, and the
other is a decoded signal. If you have the digital receiver linked
to your audio-video receiver via the S/PDIF output, you have
to set the Digital Audio option to multi-channel, which means
that the digital receiver will output encoded Dolby Digital audio without decoding so that your audio-video receiver can
decode it. Otherwise, set it to PCM, then the digital receiver
will output decoded Dolby Digital audio, scaling it down to
two channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
If you feel that the audio from the S/PDIF output does not
synchronise with video, you can straighten it by adjusting the
value of the S/PDIF Audio Delay option.
4 Preference Settings
tion. If the option is set to Standard, the digital receiver will
pass along the video from the video device to your television
when it starts playback. But if the option is set to External A/V,
the digital receiver will not pass the video automatically. You
have to press the M button to pass it along. It is impossible for the digital receiver to record the video from the video
device since the digital receiver is just a bypass for the video
recorder.
26
Preference Settings
Some programmes provide extra special audio track, which
you can activate by setting the Audio Description option to On.
4.3
Local time setting
You should set your local time for timer events.
Select the Settings > Time
menu. You should see a screen
like the left figure. You can set
the clock manually or use the
time signal, Greenwich Mean
Time (GMT), carried as part of
the digital television broadcast.
To use Greenwich Mean Time,
take the following steps:
1. Set the Mode option to Auto, then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 4.1.
3. Make sure that your local time is correctly displayed on
the Local Time item.
To set the local time manually, set the Mode option to Manual and enter your local time to the Local Time option with
the numeric buttons. The time format is day/month/year 24hour:minute. To change the time format to 12-hour format, set
the Time Format option to 12 Hours.
If daylight saving time is observed in your state at the moment,
set the Daylight Saving Time option to On.
NOTE
Daylight saving time adds one hour to the time when the option is set to On. When setting the time offset from Green-
4.4 Parental control
27
Table 4.1: Time offset table
4.4
Time offset
City
GMT − 12:00
GMT − 11:00
GMT − 10:00
GMT − 09:00
GMT − 08:00
GMT − 07:00
GMT − 06:00
GMT − 05:00
GMT − 04:00
GMT − 03:30
GMT − 03:00
GMT − 02:00
GMT − 01:00
GMT
GMT + 1:00
GMT + 2:00
GMT + 3:00
GMT + 3:30
GMT + 4:00
GMT + 4:30
GMT + 5:00
GMT + 5:30
GMT + 6:00
GMT + 7:00
GMT + 8:00
GMT + 9:00
GMT + 9:30
GMT + 10:00
GMT + 11:00
GMT + 12:00
Eniwetok, Kwajalein
Midway Island, Samoa
Hawaii
Alaska
Pacific Time US, Canada
Mountain Time US, Canada
Central Time US, Canada, Mexico City
Eastern Time US, Canada, Bogota, Lima
Atlantic Time Canada, La Paz, Dominican Republic
Newfoundland
Brazil, Georgetown, Buenos Aires
Mid-Atlantic
Azores, Cape Verde Islands
London, Lisbon, Casablanca
Paris, Brussels, Copenhagen, Madrid
South Africa, Kaliningrad
Baghdad, Riyadh, Moscow, St. Petersburg
Tehran
Abu Dhabi, Muscat, Baku, Tbilisi
Kabul
Ekaterinburg, Islamabad, Karachi, Tashkent
Bombay, Calcutta, Madras, New Delhi
Almaty, Dhaka, Colombo
Bangkok, Hanoi, Jakarta
Beijing, Perth, Singapore, Hong Kong
Tokyo, Seoul, Osaka, Sapporo, Yakutsk
Adelaide, Darwin
Eastern Australia, Guam, Vladivostok
Magadan, Solomon Islands, New Caledonia
Fiji, Auckland, Wellington, Kamchatka
Parental control
In general, television programmes are classified according to
the level of violence, nudity and language of their content.
When you are watching a programme, you can check its programme classification on the information box. For the information box, see §5.2.3. You can prevent your children from
4 Preference Settings
wich Mean Time, make sure that time offset does not include
daylight saving time.
28
Preference Settings
watching specific programmes by specifying a maximum permissible level.
Select the Settings > Parental
Control menu. You should see
a screen like the left figure,
and you will be asked your
Personal Identification Number
(PIN). The number is initially set
to ‘0000’ as default.
If you wish to block programmes for viewers aged 15 or above,
set the Censorship option to 15 (age). Setting it to No block
blocks no programme; on the other hand, setting it to Total
block blocks every programme.
NOTE
If a programme has no rating information, your censorship
setting will not take effect.
If anyone is trying to watch a programme that is of or above the
censorship setting, the person has to enter the personal identification number to override. To change the number, select the
Change PIN Code menu, then a box pops up, asking a new
PIN. Enter a desired number twice for confirmation.
You can also restrict uses of some menus. Selecting the Access
Control menu displays a list of menus that you can lock. If the
Time item is set to Locked, you have to enter the PIN when
accessing the Time menu. If you enter a wrong number, you
cannot use the menu. To release a locked item, set it to Unlocked.
4.5 Options for recording
4.5
29
Options for recording
To enable the time-shift function, you should set the Time Shifting option to anything other than Disable. The available range
for this option is 30 minutes to 5 hours. You will have the latest
of the current programme as long as the duration specified at
this option.
You can set the duration of the timer recording. Set the Timer
Recording Duration option as you desire. Its available range is
10 minutes to 3 hours.
Time padding is the feature of adding extra recording time to
the beginning or end of a programme, so that you do not miss
any part of the programme. Set the Time Padding of Timer
Recording option as you desire.
You can adjust the duration of the instant recording. Set the
Instant Recording Duration option as you desire. Its available
range is 30 minutes to 5 hours.
4 Preference Settings
To set the options for recording,
select the Settings > Recording
menu. You should see a screen
like the left figure.
30
4.6
Preference Settings
Options for playback
To set the options for playback,
select the Settings > Playback
menu. You should see a screen
like the left figure.
If you want to play back a recorded file from beginning, set
Starting Position option to Beginning. To play back a recorded
file from the part where you were watching, set this option to
Continuing.
You can adjust the jump interval that is for playback. Set the
Jump Time Interval option as you desire. Its available range is
10 seconds to 3 minutes.
If you want to enjoy more levels of playback speed, set the Trick
Mode Level option to 2x, 4x, 8x, 16x, 32x, 64x; otherwise, set
it to 4x, 16x, 64x.
NOTE
You can enjoy video files such as Xvid with the digital receiver. However, the above options might not be effective
depending on the video files to be played. For detailed description on how to play back a video file, refer to §8.5.
If you have subtitle files such as .smi, .sub, .idx, and .srt, the
digital receiver can also display them. The Media Subtitle item
provides some options for video subtitle. When you play back
a video file with a subtitle file, if the subtitle does not match the
video, then you can synchronise them by adjusting the value
of the Sync option. In addition, you can change the colour and
4.7 Options for on-screen display 31
4.7
Options for on-screen display
To set the options for the onscreen display (OSD), select the
Settings > OSD menu. You
should see a screen like the left
figure.
To adjust the transparency level of the OSD, set the OSD Transparency option as you desire. Its available range is 0 to 50 percent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the information box will not be displayed when you switch services.
However, pressing the
button will display the information
box. If you set this option to Never Hide, the information box
will always be displayed. For the information box, see §5.2.3.
In addition, you can raise or lower the position of the information box. Set the Info Box Position option as you desire. Its
available range is −10 to +3 lines. The higher you set the option, the lower the information box will be positioned.
To use an animation effect when changing menu, set the Animation option to Enable.
If any service’s name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the Text Scroll option to anything other than Disable.
4 Preference Settings
size of subtitle by setting the Font Color and Font Size options
to one you prefer.
32
Preference Settings
With the choice of Full Scroll, it will be fully scrolled until its
end disappears; with the choice of Part Scroll, it will be scrolled
only to its end.
4.8
Options for the front display
To set the options for the front
display, select the Settings >
Front Display menu. You should
see a screen like the left figure.
The front display shows the currently viewed service’s number
and name. If any service’s name is too long to fit the width of
the service name column, you can get it to scroll by setting the
Main Display Scrolling option to anything other than Disable.
With the choice of Unlimited, it will be repeatedly scrolled; with
the choice of Once, it will be scrolled only once. If you want to
have the current time displayed instead of the service number,
set the Sub Display Content option to Time.
You can also adjust the brightness of the front display in active
mode and standby mode by setting the Brightness in Operation
Mode option and the Brightness in Standby Mode option to any
as you like.
4.9
Options for Photo Album
You can change a time interval and effect of slideshow in the
photo album. For the photo album feature, see §8.4.
To change the time interval of slideshow, select the Settings >
Miscellaneous menu, and then set the Slideshow Time Interval
4.10 Options for standby mode
33
option as you desire. Its available range is 3 to 10 seconds.
Overlap overlaps the current picture and a following picture.
Cover covers the current picture with a following picture.
Move moves the current picture and displays a following picture.
Mosaic displays a following picture with a mosaic effect.
To use those effects ramdomly, set this option to Random. The
default value is Random.
4.10
Options for standby mode
You can have the current time displayed on the front display
in standby mode. Select the Settings > Miscellaneous menu
and set the Standby Mode option to Active; otherwise, set it
to Passive. When you set the Standby Mode option to Active,
the receiver can also bypass the signal from the antenna. To
save power consumption, you might as well set the Automatic
Power Down option to Enable. With this option enabled, the
receiver will be turned off automatically when there is no manipulation over three hours.
4 Preference Settings
To change the effect of slideshow, select the Settings > Miscellaneous menu, and then set the Slideshow Effect option as
you desire. There are four types of effects as follows:
34
Every Day Use
Chapter 5
Every Day Use
5.1
Volume control
Use the VOLUME− and VOLUME+ buttons to alter the volume
to a comfortable level. You may need to adjust the volume on
your television set too. To temporarily switch off the sound,
button. Press it again to restore the sound to prepress the
vious level.
5.2
Watching television
To change services, press the CHANNEL− or CHANNEL+ button. Pressing the
button switches to the previously viewed
service. In addition, you can switch to your desired service by
entering its service number with the numeric buttons. You can
also select a service to watch in the services list.
5.2.1
The services list
To view the services list, press the OK button.
5.2 Watching television
35
On the services list, you can see
the service information as follows:
A dollar sign ($) may be marked on some entries, indicating
pay service. To watch pay services, you need a subscription
card.
To select a desired service, put the highlight bar on its entry
with the
or
button and press the OK button, then the
selected service will be presented.
Pressing the
or
button skips over 10 entries up or down.
Entering a service number with the numeric buttons puts the
highlight bar on its entry.
You can switch between the television services list and the rabutton.
dio services list by pressing the
5.2.2
The favourite service lists
You can select a service on a favourite list as well as on the
services list.
5 Every Day Use
• Service number and name
• Multiplex information
36
Every Day Use
To display the favourite lists,
press the F2 button at the services list screen. For the services
list, see §5.2.1.
To select a favourite list, put
the highlight bar on a desired
favourite group list and press
the OK button, then the selected
favourite group’s services will be
listed.
As to how to edit the favourite lists, refer to §6.1.
To select a favourite service, put the highlight bar on a desired
service and press the OK button, then it will be displayed. To
select another group, press the
button.
After you have selected a favourite service, if you then switch
to another service using the
or
button, it will be also
another favourite service of the selected group. The digital receiver will remind you what group you have selected by displaying its name at the top right of the screen whenever you
switch services.
To return to the services list, press the F1 button. Besides that,
you can add or delete a favourite group or service.
To add the service you are currently watching into a favourite
group, press the Option button to display additional options,
and then select Add this service item.
To remove the currently highlighted favourite grop or service,
select Delete item in the additional option box, then you get
asked for confirmation; with the choice of Yes, it will be removed.
5.2.3
Viewing programme information
button displays the information box, on which
Pressing the
you can see all of the following:
5.2 Watching television
Service number and name
Signal level and quality
Programme name
Programme classification sign
Programme summary
Broadcasting time
Current time
In addition, you might see the following symbols:
• Subtitle symbol ( ) if subtitle tracks are provided on the
current programme.
• Teletext symbol (
current service.
) if teletext pages are provided on the
• Dolby Digital symbol (
) if a Dolby Digital audio
track is provided on the current programme.
• Lock symbol (
) if the current service is locked.
• Dollar symbol ($) if the current service is a pay service.
Pressing the
button once more displays detailed information about the current programme. To hide the information
box, press the EXIT button.
5.2.4
Selecting audio tracks
Some programmes are provided with audio tracks in one or
more languages. Pressing the
button displays available audio tracks. Once you select an audio track, that track will be
heard. In addition, you can enjoy audio tracks in four sound
modes: Stereo, Mono, Left or Right.
5.2.5
Selecting subtitle tracks
Some programmes are provided with subtitle tracks in one or
more languages. If the current programme provides subtitle
5 Every Day Use
•
•
•
•
•
•
•
37
38
Every Day Use
tracks, the subtitle symbol ( ) will be marked on the information box. Pressing the
button displays available subtitle
tracks. Once you select a subtitle track, it will be displayed.
5.2.6
Viewing teletext
On some services, such information as weather reports, news
or stock quotations is provided by means of teletext. If the current service provides teletext, the teletext symbol ( ) will be
displayed on the information box. Press the
button to view
teletext pages.
Select a page to view by entering its page number with the nu
meric buttons. You can zoom into a teletext page with the F3 button, and adjust its transparency level with the F4 button.
To clear the teletext screen, press the EXIT button.
5.3
Viewing electronic programme guide
The Electronic Programme Guide (EPG) shows the current and
scheduled programmes that are or will be available on each
service with a short summary for each programme.
Pressing the GUIDE button displays the electronic programme
guide, on which you can see the
following:
•
•
•
•
Scheduled programmes
programme summary
Broadcasting date
Broadcasting time
To see detailed information of a desired programme, put the
highlight bar on the programme with the
press the
or
or
button and
button. To switch to another service, press the
button.
5.4 Using time-shift
39
You can travel over previous days with the F2 button, and can
travel over next days with the F3 button.
To see the programme guide for radio broadcasts, press the
button. To switch it back, press the
button again.
You can make a timer recording on the electronic programme
guide. See §7.1.3 for detailed description.
5.4
Using time-shift
You can pause and resume a live television programme, and
even rewind and replay it. When you are watching a programme and you miss something, you can rewind and replay
it. Or when your attention is needed elsewhere, you can pause
a live TV and resume a short time later without losing any of
the programme.
When you do this, you are no
longer watching the live programme, instead you are watching a delayed presentation. This
is called time-shifted television.
You can skip commercials until
you catch up to the live broadcast.
In order to use the time-shift feature, set the Time Shifting option to desired duration of time. Then the digital receiver will
archive the programme as much time as you set in the option.
See §4.5.
The time-shift will be reset each time you change to another
service. With the time-shift, the following operations are pos-
5 Every Day Use
Pressing the F1 button will rearrange the form, swapping the
columns and rows. To switch it back, press the F1 button
again.
40
Every Day Use
sible:
button; to go for• To go back in time, hold down the
ward, hold down the
button. The progress bar is displayed momentarily with a preview window.
• You can navigate using the progress bar, refer to §7.3.1.
• You can jump backward and forward by pressing the F4 and F3 buttons. You can change the jump time at the
Jump Time Interval option. See §4.6.
• You can change playback speed. See §7.3.2 for slow motion. For fast motion, see §7.3.3.
• To check your current position in time-shift, press the
button. The time difference compared to live programme is displayed momentarily in top right corner of
the screen. A value of −02:00 means two minutes behind the live programme.
• To make a recording of the time-shifted programme„ see
§7.1.4.
• To end time-shift, press the
gramme will be displayed.
button. The live pro-
NOTE
You can adjust some options for time-shift. Refer to §4.5.
41
6.1
Editing the favourite lists
You can make your own favourite service lists. In fact, you can
define multiple favourite service lists, each being a ‘group’ of
chosen services.
Select the Installation > Edit Favorite List menu. You should
see a screen like the left figure.
There are three columns:
• Group name (left)
• Favourites list (centre)
• Services list (right)
The services list contains all available services, whereas the
favourites list contains only chosen services that have been
added to the highlighted group. As you move the highlight
bar up or down on the group list, favourite services belonging
to the highlighted group get shown in the favourites list.
Organising Services
Organising Services
6
Chapter 6
42
Organising Services
You can add up to 30 groups. To add a new group, select the
NEW item in the group list, then the on-screen keyboard appears. See §6.2 as to how to use the on-screen keyboard.
To rename a group, put the highlight bar on the group entry
you want and press the F2 button, then the on-screen keyboard likewise appears.
To delete a group, put the highlight bar on the group entry you
want and press the F3 button, then a message box appears,
asking you for confirmation. With the choice of Yes, it will be
deleted.
You can add a favourite service to a group by taking the following steps:
1. Put the highlight bar on a desired group entry in the
group list and press the OK button to select it. The highlight bar then moves to the services list.
2. To add a service to the selected group, put the highlight
bar on a desired service entry and press the OK button.
The selected service entry gets added to the favourite list.
Repeat this step to add more entries.
3. Press the F1 button, and the highlight bar gets moved
to the favourite list. You can delete a favourite entry with
the OK button.
4. To select another group, press the F1 button again, then
the highlight bar gets moved to each column.
Furthermore, you can rearrange a group’s favourites by moving a favourite entry. To move a favourite entry, put the high
light bar on the favourite entry you want and press the F2 button. Press the
and
buttons or
and
buttons to
move it to a desired place and press the OK button. To add
radio services, press the
button, then radio service entries
get listed in the services list. To recall the television services
button again.
list after adding radio services, press the
As to how to use the favourite service lists you organised, refer
to §5.2.2.
6.2 How to use on-screen keyboard 43
6.2
How to use on-screen keyboard
You can move the highlight key
and
horizontally with the
buttons and vertically with the
buttons. Pressing the
To type a space, select the Space key or alternatively press the
button. To type lower case letters or numerals, select the
button. To delete a letShift key or alternatively press the
ter, put the cursor to the right of the desired letter on the input
butline and then select the Del key or alternatively press
ton. You must select the Save key or alternatively press the
button to complete your typing; otherwise if you press the
EXIT button, it will not be saved.
Organising Services
ter in the input line.
6
and
OK button on a key enters its let-
44
Recording and Playback
Chapter 7
Recording and Playback
NOTE
To use an external hard drive, you must connect the external
hard drive to the USB port of the digital receiver.
The digital receiver has two tuners that allow you to record up
to four different services at once while watching another one.
However, this quadruple recording and playback is only possible when they are provided from the same transponder or
not more than two different transponders. For example, if you
attemp to record services from three different transponders an
alert message appears to remind you to cancel one of the services currently being recorded. You can also enjoy the following features:
• You can record four different services while playing back
a previously recorded programme.
• You can record four different services while watching
one of them using the time-shift feature. See §5.4 for the
time-shift feature.
7.1 Recording a programme
7.1
45
Recording a programme
Once a recording gets started, a symbol like the left figure will be displayed at the top right of the screen for
a few seconds.
CAUTION
Do not move the digital receiver nor pull out the power
plug while it is running. It may cause damage to recorded
programmes. Topfield is not responsible for damages inflicted on files that are stored on the hard drive.
7.1.1
Instant recording
To instantly record a programme you are watching at present,
button.
press the
Pressing the
button will not pause the current recording
like it does with a video recorder. Instead, pressing the
button will pause the live show and begin time-shifting within the
current recording even with the Time Shifting option disabled.
In short, it is still possible to pause a recording, but literally
recording continues in the digital receiver.
7 Recording and Playback
When you are watching a different service from the service being recorded, you will see a number on the centre of the symbol, this indicates the order that the recording has started. To
record four programmes simultaneously, two tuners are allocated for the recording. Therefore, you can only change to a
limited number of services while the four programmes are being recorded.
46
Recording and Playback
After a recording has started,
pressing the
button displays
a menu like the left figure, in
which you can set the recording
duration.
To specify an arbitrary recording duration, set the Duration opand
buttons and press the
tion as you desire with the
OK
button;
the
recording
will
end
at
the
specified time.
If the information about the next programme is provided by
the electronic programme guide, the After this program and
After next program options will be enabled. Once the After this
program option is selected, the current recording will stop at
the time when the current programme is scheduled to end.
Likewise, once the After next program option is selected, the
current recording will stop at the time when the next programme is scheduled to end.
To stop recording, press the
button; then a box like the
left figure appears, which shows
the programmes currently being recorded.
Select recording by using navigation buttons
then press OK button to stop the
recording.
While a recording is going on, you can watch or record another
service. To additionally record another service, switch to the
7.1 Recording a programme
47
7.1.2
Timer recording
You can set a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch
into active mode and start recording at a specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if you
press any button on the remote control or on the front panel
even just one time, the digital receiver will not switch into
standby mode.
To add a timer recording, select the Recording > Reservation menu, then the timer list will
be displayed. To add a new timer
event, press the F1 button, and
a box like the left figure appears.
Take the following steps:
1. Set the Record option to On to make a recording. If this
option is set to Off, the digital receiver will turn on at the
specified time but not record; instead, you may record
with your video recorder or suchlike in this case.
2. You may have two sources for recording, TV and radio.
Set the Type option to your desired source.
7 Recording and Playback
service you want to record, and press the
button. Once a
recording is started, it is put on the recorded programme list
even though it is not finished yet. The recording file is named
the program name if available or after its service name with
a suffix of a number. To view the recorded programme list,
button or alternatively select the Recording >
press the
Recorded Program menu. See §7.2 for detailed description
about the recorded programme list.
48
Recording and Playback
3. Set the Service option to the service which provides the
programme you want. Pressing the OK button on this
option displays a services list, from which you can select
your desired service.
4. Set the Mode option as you desire. There are five timer
modes:
One Time means literally ‘one time’.
Every Day means literally ‘every day’.
Every Weekend means ‘Saturday and Sunday every week’.
Weekly means ‘one day every week’.
Every Weekday means ‘from Monday to Friday every
week’.
If your favourite programme is broadcast at weekends
and you wish to record every episode of the programme,
set the Mode option to Every Weekend.
5. Set the Date option to a desired date, on which the digital
receiver will turn on. The date format is day/month/yearday of the week.
Set the Start Time option to a desired time, at which the
recording will be started. The time format is hour:minute.
6. Set the Duration option to a desired time, in which the
recording will be finished.
7. Pressing the OK button on the File Name option displays
the on-screen keyboard, with which you can specify a
file name for the timer recording. If you do not specify
anything, it will be named after the service name. See
§6.2 as to how to use the on-screen keyboard.
8. To set a recording reservation with the above settings,
select the OK item; otherwise, it will not be saved and
will not occur.
You can also edit or delete timer events in the timer list. To edit
a timer entry, put the highlight bar on the entry you want and
7.1 Recording a programme
49
press OK button; then appears a box in which you can change
its settings in the same manner as making a new one.
To delete a timer event, put the highlight bar on the entry you
want to remove and press the F2 button, then you get asked
for confirmation. With the choice of Yes, it will be deleted. To
delete all timer event, press the F3 button.
7.1.3
Scheduling recordings using the programme guide
If the electronic programme
guide is properly provided,
you can make timer events on
it. The instructions on how to
make timer recordings using the
electronic programme guide are
as follows:
1. Press the GUIDE button to display the electronic programme guide.
2. Select a programme you want to record with the navigation buttons.
3. To make a timer event without recording, press the OK button; the letter P is displayed. To make a timer event
with recording, press it once more or alternatively press
the
button, then the letter R is displayed.
4. Pressing the OK button once more will cancel the timer.
7.1.4
Recording a time-shifted programme
While watching a programme with time-shift, you can record
it by performing the following steps:
1. Press the
button to display the progress bar.
7 Recording and Playback
You can sort timer events by time with the F4 button.
50
Recording and Playback
2. To move to the beginning of the desired scene, hold
down the
or
button until it is reached.
3. Press the
button to start recording. The time-shift
buffer from that position onwards will now be recorded.
4. Press the
button to stop recording.
5. Press the
button once more to stop time-shift.
See §5.4 for detailed description about the time-shift feature.
7.1.5
Recording a pay service programme
You can record a pay service programme without the subscription card. However, you need the subscription card to play
it back because it has not been descrambled. So it is recommended to record pay service programmes with a proper subscription card so that they can be descrambled and recorded.
In that case, you can enjoy them without the subscription card
like free services.
To record a programme of a pay service in descrambled form,
take the following steps:
1. Select a programme of a pay service you want to record.
2. Make sure that the subscription card is inserted in the
slot on the front of the digital receiver.
3. Start recording.
4. Do not switch to other service nor use time-shift until
recording is finished.
NOTE
If you switch to other service or use time-shift in the middle
of recording a pay programme, it will be recorded without
descrambling from that moment. Even if the recording is
only partially descrambled, you need the subscription card
to play it back.
7.2 File archive 51
7.2
File archive
When a programme is recorded, it is stored as a file on the hard
drive of the digital receiver. You can select a recording to play
back from the recorded programme list.
You can play, move, delete, rename and lock a recording file.
You can also sort the recording files by file name, running time
or file size. In addition, you can make a new folder.
7.2.1
To delete a recording
To delete a recording, put the highlight bar on it and press
the F4 button, then you get asked for confirmation. With the
choice of Yes, it will be deleted.
7.2.2
To sort recordings
To sort the recordings, take the following steps:
1. Press the Option button to display additional options.
2. Set the Sorting option to Alphabetic, Time or Size as you
want.
3. Press the EXIT button.
4. They will be sorted by the specified option.
7 Recording and Playback
Select the
Recording >
Recorded Program menu or
alternatively press the
button to display the recorded
programme list. The file information is comprised of the
following elements: file number, file name, recording time,
running time, file size and so on.
52
Recording and Playback
7.2.3
To lock a recording
To lock a recording so that other persons cannot play or delete
it, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the Option button to display additional options.
3. Set the Lock option to Locked.
4. Press the EXIT button.
5. The lock symbol (
) is displayed on it.
If you select a locked recording to play it back, you will be
asked for your personal identification number.
7.2.4
To rename a recording
To change a recording’s name, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the Option button to display additional options.
3. Select the Rename option, and the on-screen keyboard
appears. Change the name and save it. See §6.2 as to
how to use the on-screen keyboard.
7.2.5
To make a new folder
To make a new folder, press the F2 button, then a new folder
named GROUP # is created. You can change its name in the
same manner as renaming a recording. See above.
7.2.6
To move a recording to another folder
To move a recording to another folder, put the highlight bar
on a desired recording and press the F3 button. Once you
choose a folder, the recording is moved to it.
7.3
Playing back a recording
When a programme is recorded, its additional contents such
as audio track or subtitle track are also recorded together. So
you can enjoy them while playing back a recording.
7.3 Playing back a recording
53
The instructions on how to play a recording are as follows:
1. Select the Recording > Recorded Program menu or
button to display the list of
alternatively press the
recorded programmes.
2. Put the highlight bar on a desired recording and press
the OK button, then an option box pops up.
4. To stop playback, press the
button.
During playback, you can enjoy the following tricks:
• To see the detailed information about the currently
button; then the informaplayed recording, press the
tion box appears and shows its file name, running time,
programme information, and so on.
• To pause playback, press the
button.
press the
button. To resume it,
• To view the progress bar, press the
press the
button again.
button; to hide it,
• When the progress bar is hidden, you can move to a desired scene by entering a progress percentage with the
numeric buttons.
7.3.1
To navigate using the progress bar
First press the
button to display the progress bar.
• To go forward, hold down the
ward, hold down the
button; to go back-
button.
• If there are no bookmarks, you can jump forward by the
minute set to the Jump time Interval option with the F3 button. See §4.6 for that option. Refer to §7.3.4 as to how
to bookmark a position.
7 Recording and Playback
3. To play from beginning, set the Starting Position option to Beginning; to play from the point that you have
stopped at the last time, set it to Continuing. To start playback, select the Play item.
54
Recording and Playback
• To jump to the beginning, press the
• To jump to the end, press the
button.
• To hide the progress bar, press the
7.3.2
button.
button again.
To play in slow motion
To watch in slow motion during a playback, press the
button. If you press it repeatedly, the playback speed changes in 4
steps: 1/2, 1/4, 1/8 and 1/16 times. To resume normal speed,
button.
press the
7.3.3
To play in fast motion
butTo watch in fast motion during a playback, press the
ton. If you press it repeatedly, the playback speed changes. To
button.
resume normal speed, press the
You can play not only forward but also backward in fast mobutton. If you press it
tion. To play backward, press the
repeatedly, the playback speed changes. To resume normal
button.
speed, press the
You can change the playback speed in 3 steps (4, 16 and 64
times) or in 6 steps (2, 4, 8, 16, 32 and 64 times). See §4.6.
7.3.4
To make a bookmark
You can mark favourite parts of
a recording by creating bookmarks and then jump to them in
sequence. Bookmarks are stored
with the recording so that you
can use them again afterwards.
To make bookmarks, take the following steps during playback:
1. Press the
button to display the progress bar.
7.3 Playing back a recording
55
2. To add a bookmark, press the F2 button at a desired
scene, then you will see a small pointer appear above the
progress bar like in the picture above.
3. To jump forward to the next bookmark, press the F3 button.
7.3.5
To play back a recording repeatedly
button when the progress
To play back in whole, press the
bar is hidden, then the repetition symbol (
) is displayed on
the information box. To cancel it, press the
button again.
To play back in part, take the following steps:
1. Press the
button to display the progress bar.
2. Move to the beginning scene of the part you want to play
repeatedly by holding down the
3. Press the
or
button.
button, then the pointer starts to blink.
4. Move to the end scene; the selected part is marked in
black.
5. Press the
button again to start repeated playback.
6. To cancel it, press the
is displayed.
7.3.6
button when the progress bar
To play back recordings in sequence
You can play several recordings continuously in sequence by
performing the following steps:
button or alternatively select the Record1. Press the
ing > Recorded Program menu to display the list of
recorded programmes.
2. Select each desired recording with the F1 button. Once
a recording is selected, it gets numbered.
3. Press the
button to start playback.
7 Recording and Playback
You can play back a recording repeatedly both in whole and in
part.
56
Recording and Playback
4. The selected recordings are played in the sequence that
they are numbered.
5. To jump to the beginning of the next recording in the
button to display the progress bar,
queue, press the
then press the
button.
7.3.7
To play back a scrambled recording
If you have recorded a programme of a pay service with the
subscription card, you can play it as freely like that of a free
service. Otherwise you need the subscription card to play it
back because it has been recorded without descrambling even
though it may have been partially descrambled.
On the recorded programme list, a purely green $ indicates the
recording has been wholly descrambled; on the other hand, a
yellowish green $ indicates it has been partially descrambled,
and a purely yellow $ indicates it has not been descrambled at
all.
7.4
Copying a recording
You can record the file in whole or in part during a playback
by performing the following steps:
1. Start playback of a recording you want.
2. Move to a scene from which you want to start copying by
holding down the
or
button.
3. Press the
button, then it will be copied in a new file
which is named after the original recording with a suffix
of ‘COPY’ and a number.
4. To stop copying, press the
7.5
button.
Formatting the hard disk
You can delete permanently all contents stored in a hard drive
by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu. With pressing the OK button, you get
7.5 Formatting the hard disk
57
asked for confirmation. Formatting will start with the choice
of Yes.
7 Recording and Playback
58
Entertainment
Chapter 8
Entertainment
This digital receiver provides several special features for entertainment.
8.1
Configuring the network setting
You should configure the network settings to enjoy a variety
web services.
Select the Installation > Network Setting > IP
Setting menu.
The easiest way to configure the network settings is to assign a
dynamic IP address to the digital receiver by setting the Connection Type option to DHCP.
To assign a static IP address, set the Connection Type option
to Static, then the IP Address, Subnet Mask, Gateway, Primary
DNS and Secondary DNS options become enabled. You have
8.2 Copying files
59
to set these options to match with the configuration of your
router.
8.2
Copying files
To copy from the external to the internal hard drive, take the
following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the
button and then press the
to select the External List.
or
button
5. Press the OK button, then the selected file will be copied
into the built-in hard drive.
8.3
Playing back MP3 files
You can enjoy music or audio
books in MP3 format on the digital receiver. Refer to §8.2 as to
how to copy a file from an external hard drive into the built-in
hard drive of the digital receiver.
To play an MP3 file, take the following steps:
1. Select the Entertainment > MP3 Player or press the
button and then the
or
button to display the MP3
file list.
2. Put the highlight bar on a desired file; if you want to play
several files, select them with the F1 button.
Entertainment
4. Select a folder in the built-in hard drive.
8
3. Put the highlight bar on a desired file and press the F3 button, then the list of folders gets displayed.
60
Entertainment
3. Press the
button to start playback.
4. To stop playback, press the
button.
To play all MP3 files in a subfolder, put the highlight bar on a
desired folder, and press the
button. To change from one
file to the next or previous file, use the
or
buttons.
8.4
8.4.1
Viewing image files
How to move a file to the photo album
You must move the jpg files into the Photo Album folder first.
Please ensure your external hard drive is connected to your
unit.
1. Select MENU button on your remote then go to Entertainment > Media Player.
2. Press the SAT button on your remote to bring up your
external hard drive.
3. Select the external hard drive name and then press OK .
4. You will then get access to your external hard drive. Navigate through the external hard drive file and folders until you have selected the image file you want to transfer.
5. With the file selected, press the F3 button, then another
screen will appear. Select Photo Album and press OK .
Now, you can view the image
files in jpg format by performing
the following steps:
8.5 Playing back a video file
61
1. Select the Entertainment > Photo Album menu, and then
press the
or
button to display the list of image files.
2. Put the highlight bar on a desired file and press the OK button; if you want to view several files using a slide
show, press the F1 button. You can change a time interval and effect of slideshow. See §4.9.
3. To stop viewing, press the EXIT button.
8.5
Playing back a video file
Refer to §8.2 as to how to copy a
file from an external hard drive
into the built-in hard drive of the
digital receiver. To play a video
file, take the following steps:
1. Select the Entertainment > Media Player, then press the
button, and
SAT button on the remote or press the
then the
or
button to display the video file list.
2. Put the highlight bar on a desired file; if you want to play
several files, select them with the F1 button.
3. Press the
button to start playback.
4. If it has its own one or more subtitle files, you can select
one you prefer with the
button to display subtitle.
Entertainment
• video: XviD, VOB, MKV, MP4, and AVI
• photo: JPG
• music: MP3
8
You can play back media files such as photos, videos and music
with this digital receiver. Media file formats that you can play
back with the digital receiver are as follows:
62
Entertainment
5. To stop playback, press the
button.
NOTE
Due to the variations of video/audio codec types, there
could be certain files not playable.
8.6
Playing back YouTube contents (optional)
YouTube is a video sharing website where users can upload,
view and share video files. With the TRC-1400, you can access
YouTube and play back various contents.
When you select the Entertainment > YouTube, you should see
a screen like the left figure.
To play back a YouTube content,
and
select a content with the
buttons and press the OK button. To play back the content
with full screen, press the OK button again.
You can sort the contents with the option buttons as follows:
• F1 button by most featured
• F2 button by view count
• F3 button from most discussed to least discussed
• F4 button by top favourites
•
button related contents
By pressing the Option button, you can sort the contents by the
updated date, country and quality.
You can also search contents by a specific keyword. To search
contents by a keyword, press the SAT button, then the onscreen keyboard appears. See §6.2 as to how to use the onscreen keyboard.
8.7 Sharing image files by Flickr (optional)
63
To see detailed information about the current one, press the
button. To hide the information box, press the EXIT button.
8.7
Sharing image files by Flickr (optional)
Flickr is an image hosting website and on-line community platform. You can search an image file from the network server and
view the file using the Flickr.
To use this function, select the
Entertainment > Flickr.
2. Enter a desired user name. As to how to use the keyboard, refer to §6.2.
3. After adding a user, select the user with the
buttons and press the OK button.
and
To delete a user, put the highlight bar on a desired user and
press the F2 button, then you get asked for confirmation. If
you select YES, it will be deleted.
You can also search image files by a specific keyword. To do
that, take the following steps:
1. Press the F3 button to go to the keyword search mode.
2. Press the F1 button, then the on-screen keyboard appears.
Entertainment
1. Press the F1 button, then the on-screen keyboard appears.
8
You can see image files which belong to a specific user by adding
a user. To add a user, take the following steps:
64
Entertainment
3. Enter a keyword as you desire. As to how to use the keyboard, refer to §6.2.
4. Select the Save key on the on-screen keyboard to start
searching image files.
To save an image file to the photo album, press the Option button. For the photo album see §8.4.
8.8
SHOUTcast Internet radio (optional)
SHOUTcast™ Radio is one of the largest directories of professionally and community programmed online radio stations in
the world. Today SHOUTcastTM Radio features over 25,000 stations from around the globe. If you are into pop or rock music,
want to check out local or world programming, you’re sure to
find something you like on SHOUTcastTM Radio.
To use SHOUTcast, select the
Entertainment > SHOUTcast.
To listen to a radio station, select a radio station with the
and
buttons and press the
OK button.
To search radio stations by genre, press F1 button.
You can also search radio stations by a specific keyword. To do
that, take the following steps:
1. Press the F3 button, then the on-screen keyboard appears.
2. Type a keyword you desire. As to how to use the keyboard, refer to §6.2.
3. Select the Save key on the on-screen keyboard to start
searching radio stations.
8.9 Weather forecast (optional)
65
To add a radio station to a favourite list, put the highlight bar on
a desired radio station and press the Option button. To display
the favourite list, press the F2 button.
For more details, visit the SHOUTcast web site,
http://www.shoutcast.com. You can check their
terms of service at the http://www.shoutcast.
com/disclaimer.
8.9 Weather forecast (optional)
You can view the weather of your city or other cities.
1. Press the F1 button to see additional options.
2. Set the Continent, Country and City options as you desire
with the navigation buttons.
3. Press the EXIT button.
Pressing the Option button toggles between the Centigrade and
Fahrenheit.
Entertainment
To change a city, take the following steps:
8
To view the weather, select the
Entertainment > Weather, then
you should see a screen like the
left figure.
66
Firmware Update
Chapter 9
Firmware Update
The digital receiver has a stable and convenient firmware to
use. However, once in a while a new firmware may be released to improve the digital receiver. You can get the latest firmware and the firmware update tool, which runs on
most versions of Windows, from the Topfield website, http:
//www.i-topfield.com.
9.1
From a memory stick
If you have a USB memory stick, you can update the firmware
from it by taking the following steps:
1. Download a new firmware from the Topfield website.
2. Copy the firmware file to your memory
stick.
3. Insert the USB memory stick into the USB
port on the digital receiver.
4. Select the Installation > Firmware Upgrade > USB
Firmware Upgrade menu, and the files in the USB memory will be listed.
9.2 Over the air (optional)
67
5. Place the highlight bar on the right firmware file and
press the OK button, and a countdown will be displayed
on the front display of the digital receiver.
6. When the message of ‘END’ appears, restart the digital
receiver.
9.2
Over the air (optional)
9
It is possible to update the firmware to the latest version over
the air.(optional) If a new version is available at any time, then
a message box pops up, asking you whether to start firmware
update. With the choice of Yes, you will be moved to the
SSU Software Upgrade menu, and the firmware update will
be started.
Firmware Update
68
Universal Remote Control
Appendix A
Universal Remote Control
The universal remote control allows you to operate the most
important functions such as power on/off and volume control
on your television, audio-video receiver, or DVD player. For
the use of buttons, refer to Table A.1. To be able to control the
device, you must adapt the remote control to the device first.
Take the following steps:
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the device.
3. Hold down the OK and device button simultaneously
for two seconds until the light flashes on. For example,
if you want to operate your television with the remote
control, press the OK and TV buttons simultaneously.
4. Find the manufacturer of the device from the codes list.
5. Enter the three-digits code you have found for your de
vice and press the OK button.
6. If the setting is finished correctly, the light blinks twice
and the device will be turned off. Otherwise, repeat from
the step 2.
If you cannot find a code for your device, do as follows:
69
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the device.
3. Hold down the OK and device button simultaneously
for two seconds until the light flashes on. For example,
if you want to operate your television with the remote
control, press the OK and TV buttons simultaneously.
4. Press the CHANNEL+ or CHANNEL− button until the device turns off.
If you want to find out the number which you set for your device, do as follows:
2. Press the
button. Then the light will show the number with blinks. For example, if the number is 3, the light
will blink three times. In case of 0, the light will blink ten
times.
You can reset the settings by doing as follows:
1. Hold down the TV and 0 buttons simultaneously for
more than five seconds.
2. Each device button blinks three times in the following
order: PVR → DVD → AUX → TV 3. After that, all settings will be reset to the manufacturer’s
factory settings.
NOTE
Some buttons may not work properly depending on a device.
If your device code is not listed on the following pages, you
will not be able to use this remote as a universal remote for
your specific device.
A Universal Remote Control
1. Hold down the OK and device button simultaneously
for two seconds. For example, if you want to know the
number which you set for your television, press the OK and TV buttons simultaneously.
70
Universal Remote Control
Table A.1: Operating buttons
PVR
TV
DVD
AUX
VOLUME + VOLUME
−
Power on/off
Volume up
Volume down
Power on/off
Volume up
Volume down
Power on/off
Volume up
Volume down
CHANNEL + CHANNEL
−
0 1 2 3 4 5 6 7 8 9 Mute
X
X
0
1
2
3
4
5
6
7
8
9
X
X
X
0
1
2
3
4
5
6
7
8
9
Mute
Channel up
Channel down
X
1
2
3
4
5
6
7
8
9
TV INPUT
X
X
X
Up
X
X
X
Down
OK
X
X
Left
Left
X
Right
X
X
X
Right
Menu
Guide
Exit
Right
X
X
Exit
X
Stop
X
X
Rewind
X
X
Pause
X
X
Play
X
X
Fast forward
X
OK MENU GUIDE
EXIT A.1 Code list for television sets
A.1
71
Code list for television sets
A.
.
ACCENT
049, 063
ACEC
112
ACURA
195
ADMIRAL
065, 076, 163, 171, 190,
307, 324, 369
ADYSON
379
AGASHI
076, 379
AGEF
324
AIKO
049, 063, 076, 102, 141,
172, 195, 225, 379
049, 063
AIWA
376, 377
AKAI
019, 049, 050, 055, 063,
076, 102, 107, 123, 133,
139, 141, 150, 172, 174,
182, 195, 209, 225, 326,
333, 379, 428, 432, 433,
437
AKIBA
006, 049, 063, 123, 380
AKITO
049, 063, 106
AKURA
006, 049, 076, 096, 123,
195, 419, 426
ALARON
042, 334
ALBA
018, 044, 049, 050, 107,
123, 134, 163, 179, 184,
195, 225, 228, 232, 239,
379, 413, 421, 431
ALBIRAL
121, 326, 372
ALCYON
407
ALLORGAN
050, 094, 236, 334
ALLSTAR
049, 063
AMPLIVISION
113, 379, 421, 425
AMSTRAD
004, 011, 049, 063, 076,
123, 131, 172, 195, 225,
426
ANAM
049, 063, 195
ANGLO
076, 195
APOLLO
ARC EN CIEL
ARCAM
ARDEM
ARISTONA
A.R.SYSTEM
ARTHUR MARTIN
ASA
ASBERG
ASORA
ASTRA
ASUKA
ATLANTIC
ATORI
AUCHAN
AUDIOSONIC
AUDIOTON
AUSIND
AUTOVOX
AWA
AYOMI
049, 063, 076, 195, 407
045, 049, 063, 107, 112,
195, 210, 242, 391, 413,
421
165
029, 034, 074, 182, 186,
415, 424
029, 379, 424
392
049, 050, 063, 065, 079,
112, 158, 160, 188
049, 063
075, 107, 127, 133, 136,
139, 148, 153, 307, 425
003, 020, 065, 078, 080,
091, 117, 146, 171, 197,
235, 307, 319, 324, 341,
375, 406, 408
049, 063, 407
195
195
006, 050, 076, 123, 379
049, 050, 063, 113, 236,
242, 379
195
107, 425
031, 049, 063, 074, 076,
195, 213, 379, 392, 421
050, 076, 379, 392, 421
075, 090, 407
050, 071, 078, 079, 080,
083, 090, 147, 156, 236,
254, 305, 319, 323, 324,
379, 407, 413, 416
018, 049, 063, 131, 195,
206, 320, 379, 426, 433
411
B.
.
BAIRD
074, 102, 182, 209, 321,
329, 379, 409
A Universal Remote Control
AIM
ANITECH
ANSONIC
72
Universal Remote Control
BANG & OLUFSEN
324
BARCO
107, 355, 371, 372, 422
BASIC LINE
006, 031, 049, 107, 123,
159, 195, 207, 226
BASTIDE
379
BAUR
012, 049, 053, 063, 107,
150, 172, 244, 245, 246,
247, 301, 357, 414, 416
BAZIN
379
BEKO
063, 184, 240, 241, 392,
421, 433
BEON
049, 063, 163
BEST
213, 421
BESTAR
049, 063, 421
BINATONE
379
BLACK STAR
413
BLACKTRON
006
BLACKWAY
006
BLAUPUNKT
019, 053, 057, 060, 113,
118, 244, 245, 246, 247,
248, 249, 308
BLUE SKY
006, 049, 063, 123, 195,
232
BLUE STAR
006
BONDSTEC
413
BOOTS
050, 106, 379
BPL
006, 049, 063
BRANDT
074, 182, 218, 415, 424,
436
BRANDT ELECTRONIQUE 029, 034, 074, 182, 186
BRINKMANN
049, 063, 163
BRION VEGA
049, 063, 065, 083, 167,
172, 173, 181, 196, 324,
356
BRITANNIA
379
BROTHER
076
BRUNS
056, 065, 324
BSR
094, 107, 110, 139, 168,
314
BTC
123
BUSH
BUSH (UK)
006, 018, 049, 076, 094,
106, 107, 123, 134, 139,
142, 143, 172, 179, 195,
209, 223, 225, 226, 232,
239, 307, 379, 416
107, 147, 168
C.
.
CAPSONIC
CARAD
CARENA
CARREFOUR
CARVER
CASCADE
CASIO
CATHAY
CCE
CENTURION
CENTURY
CGE
CIHAN
CIMLINE
CITY
CLARIVOX
CLATONIC
CLATRONIC
CMS HIGHTEC
COMTEL
CONCORDE
CONDOR
CONTEC
CONTINENTAL EDISON
COSMEL
CROSELY
076
049, 063
049, 063, 380
018, 406
177
049, 063, 064, 195
049, 063
049, 063
049, 063, 379
049, 063
044, 054, 065, 163, 189,
324, 411, 413
002, 044, 054, 090, 093,
094, 096, 107, 139, 142,
163, 168, 189, 369, 407,
413, 421
111
031, 123, 134, 195
195
056, 121, 125, 163, 406
076, 123
031, 045, 049, 063, 076,
113, 123, 195, 225, 379,
407, 413, 421, 431
379
111, 125
195
006, 045, 049, 050, 063,
113, 163, 195, 210, 379,
413, 421
018, 131, 195, 206, 302,
320, 379
029, 034, 074, 182, 186,
232, 415, 424
195, 213
044
A.1 Code list for television sets
CROSLEY
054, 065, 090, 093, 094,
104, 107, 139, 324, 407,
413
CROWN
049, 063, 154, 163, 170,
195, 209, 232, 372, 407,
419, 421, 431
CS ELECTRONICS
031, 123, 379, 413
CTC
413
CTC CLATRONIC
045
CURTIS MATHES
126, 190, 212
CYBERTRON
123
D.
.
DTS
DUAL
DUAL-TEC
DUMONT
DUMONT-FINLUX
DUX
DYNATRON
73
195
049, 050, 063, 095, 107,
139, 156, 168, 182, 242,
243, 379, 414, 416, 423,
424
195, 168, 050, 040
045, 065, 080, 102, 139,
146, 319, 324, 339, 341,
375, 379, 406, 408
020, 045, 061, 075, 078,
091, 104, 117, 147
049, 063, 112
049, 063
E.
.
042
DAEWOO
063, 123, 140, 145, 161,
193, 195, 379
DAINICHI
123, 379
DANSAI
063, 076, 141, 195, 379
DANSETTE
426
DANTAX
392, 421
DATSURA
209
DAWA
049, 063
DAYTRON
049, 063, 195, 226
DE GRAAF
023, 107, 122, 139, 209,
307
DECCA
049, 063, 102, 106, 111,
120, 200, 331, 379
DECCA (UK)
046, 050, 102, 106, 131
DEITRON
049, 063
DENKO
076
DENON
126, 212
DER
321
DERWENT
105
DESMET
049, 063, 113
DIAMANT
049, 063
DIGILINE
049, 063
DIXI
063, 195, 379, 413
DOMLAND
423
DORIC
104, 105
DREAN
049, 063
ELBE
ELBIT
ELCIT
ELECTA
ELECTRO TECH
ELEKTA
ELEKTRONSKA
ELG
ELIN
ELITE
ELMAN
ELTA
EMERSON
EMPEROR
ERRES
ESC
ETRON
EURO-FEEL
EUROMANN
EUROPA
049, 063, 107, 121, 123,
172, 194, 210, 242, 337,
368, 369, 391, 411, 421,
435
111
045, 046, 047, 062, 065,
104, 107, 150, 168, 324,
413
006, 076
195
006, 076
318
049, 063
003, 020, 049, 063, 107,
139, 172, 195, 379, 408,
416
031, 049, 063, 123
045, 168
076, 195, 379
004, 006, 042, 044, 049,
063, 065, 113, 225, 324,
327, 406, 413
006
063, 112
049, 063
049, 063, 107, 139, 195
076
049, 063, 076, 379, 421
049, 063
A Universal Remote Control
DAENYK
74
Universal Remote Control
EUROPHON
044, 045, 046, 049, 050,
063, 068, 107, 120, 168,
318, 336, 379, 413
EXPERT
107, 236, 242, 425
EXQUISIT
049, 063, 413
F.
FORMENTI
090, 107, 113, 139, 307,
324, 379, 407
FORMENTI-PHOENIX
050, 075, 104, 113, 148,
307
FORTRESS
190, 324
FRABA
049, 063, 421
FRIAC
045, 049, 063, 195
FRONTECH
076, 139, 195, 307, 379,
413, 416
.
FAMILLY LIFE
049, 063
FENNER
063, 195
FERGUSON
001, 032, 050, 073, 074,
076, 080, 082, 102, 103,
121, 158, 182, 204, 218,
244, 245, 246, 251, 306,
319, 321, 322, 328, 329,
344, 409, 411, 436
FUJITSU
042, 045, 102, 107, 195,
236, 327, 379
FUJITSU GENERAL
195, 379
FUNAI
042, 076, 094, 314, 327
049, 050, 063, 076, 107,
158, 225, 307, 364, 379
GALAXI
045, 049, 063
GALAXIS
045, 049, 063, 163, 421
GBC
031, 104, 107, 139, 143,
168, 195
FIDELITY
G.
.
FIDELITY (UK)
133
FILSAI
050, 379
FINHER
359
GE
006, 074, 182, 218
FINLANDIA
033, 122, 139, 172, 197,
209, 223, 307, 375, 419
GEANT CASINO
107, 425
GEC
049, 063, 102, 104, 107,
120, 171, 172, 192, 307,
379, 416
GEC (UK)
046, 050, 102, 107, 150,
162, 192
GELOSO
031, 047, 062, 104, 107,
139, 168, 171, 195, 307,
413
GENERAL
064, 074, 182
GENERAL TECHNIC
195
GENEXXA
049, 063, 123, 307, 426
GOLDHAND
379
GOLDLINE
213
GOODMANS
018, 042, 063, 076, 102,
134, 139, 141, 143, 155,
182, 195, 218, 225, 232,
379, 428
FINLUX
FIRST LINE
FISHER
003, 020, 042, 045, 049,
061, 063, 075, 078, 080,
090, 091, 102, 104, 107,
117, 139, 146, 147, 163,
197, 210, 235, 319, 324,
339, 341, 375, 379, 406,
407, 408, 428, 429, 437
045, 049, 063, 094, 102,
107, 134, 139, 191, 195,
209, 210, 379, 411, 413,
416
018, 041, 050, 056, 065,
069, 102, 104, 107, 117,
139, 143, 156, 172, 189,
206, 209, 320, 324, 379,
408, 414, 416, 421
FLINT
031, 049, 063, 102, 123,
379, 380
GORENJE
124, 189, 421
FNR
045
GPM
123
FORGESTONE
158
GRADIENTE
049, 063, 170, 177
A.1 Code list for television sets
GRAETZ
GRANADA
049, 063, 090, 104, 136,
139, 153, 159, 162, 171,
172, 198, 225, 307
013, 018, 033, 041, 063,
102, 104, 105, 112, 120,
148, 164, 165, 171, 209,
218, 237, 238, 240, 241,
252, 307, 325, 363, 379,
407, 418, 419
046, 050, 090, 107, 139,
143, 162, 307
GRANDIN
006, 031, 049, 063, 107,
113, 123, 195, 379, 380,
425, 431, 435
GRONIC
045
GRUNDIG
005, 019, 049, 053, 063,
080, 090, 101, 115, 118,
166, 232, 244, 245, 246,
247, 248, 249, 308, 340,
341, 406, 407
H.
.
HALIFAX
076, 379
HAMPTON
379
HANIMEX
094
HANSEATIC
006, 018, 049, 050, 063,
094, 104, 107, 113, 143,
172, 195, 324, 379, 391,
416, 421, 423
HANTAREX
045, 046, 049, 063, 195
HANTOR
049, 063
HARLEY DAVIDSON
042
HARWOOD
049, 063, 195, 426
HAUPPAUGE
049, 063
HCM
006, 031, 049, 063, 076,
123, 163, 195, 379, 426
HEMA
195, 379
HEMMERMANN
HIFIVOX
HIGASHI
050
HIGHLINE
049, 063, 076
HIKONA
123
HINARI
004, 018, 042, 049, 066,
094, 107, 119, 123, 133,
134, 139, 143, 179, 195,
209, 232, 307, 327
HISAWA
006, 031, 123, 380, 425
HIT
342
HITACHI
007, 009, 018, 020, 023,
033, 049, 050, 063, 074,
086, 102, 104, 107, 110,
126, 127, 139, 143, 150,
162, 168, 171, 176, 182,
185, 186, 192, 212, 218,
231, 304, 307, 309, 315,
333, 334, 344, 361, 379,
416, 418
HITASHI FUJIAN
013, 164, 252
HITSU
123, 195, 379
HORNYPHON
049, 063, 112
HOSHAI
123, 379
HUANYU
379
HYGASHI
379
HYPER
050, 168, 195, 254, 361,
379, 413
HYPERSONIC
172
HYPSON
006, 049, 063, 076, 379,
380, 411, 425
I.
.
IBERRIA
049, 063
ICE
049, 063, 076, 123, 195,
225, 379
ICES
123, 379
IMPERIAL
002, 044, 049, 054, 063,
090, 093, 094, 107, 142,
163, 168, 189, 301, 307,
369, 407, 413, 416, 421
150, 416
INDIANA
049, 063
029, 034, 074, 182, 186,
304, 424
INGELEN
090, 104, 136, 139, 153,
159, 162, 171, 198, 232,
435
INGERSOL
195
A Universal Remote Control
GRANADA (UK)
75
76
Universal Remote Control
INNO HIT
044, 046, 049, 050, 063,
066, 102, 123, 155, 195,
217, 379, 407, 413
INNOVATION
049, 063
INTERACTIVE
210
INTERBUY
076, 195, 413
INTERFUNK
049, 063, 065, 067, 074,
090, 104, 107, 112, 139,
150, 153, 159, 172, 182,
301, 302, 324, 363, 421
INTERVISION
006, 045, 049, 055, 063,
076, 107, 123, 225, 232,
378, 379, 380, 381, 382,
384, 385, 386, 387, 388,
389, 413, 421, 423
K.
.
KAISUI
006, 031, 049, 050, 063,
123, 195, 207, 379, 380
KAMOSONIC
050
KAMP
379
KAPSCH
107, 172, 236, 242, 408
KARCHER
003, 006, 020, 031, 045,
049, 050, 063, 068, 076,
107, 195, 207, 217, 421,
435
KATHREIN
124
KAWASHO
379
KB ARISTOCRAT
107
KENDO
044, 045, 049, 055, 063,
134, 172, 210, 413, 421,
435
KENNEDY
071, 079, 104, 107, 139,
236, 305, 323, 369
IRRADIO
031, 049, 063, 066, 075,
090, 123, 155, 195, 254,
407, 413
ISUKAI
006, 049, 063, 123
ITC
379
KINGSLEY
379
ITS
006, 031, 049, 063, 076,
123, 225, 379
KLARMAX
371, 372
KNEISSEL
049, 063, 210, 242, 369,
391, 411, 421, 435
KOLSTER
045, 049, 063, 416
KONKA
031, 049, 063, 123, 225,
232
KORPEL
049, 063
KORTING
027, 065, 094, 113, 324,
421
KOSMOS
049, 063
KOTRON
076, 426
KRAKING
411
KRIESLER
050, 063, 065, 079, 112,
158, 160, 188
KTV
050, 379
KYOSHU
076, 163
ITT
ITT-NOKIA
ITV
042, 090, 107, 117, 134,
139, 150, 157, 159, 162,
165, 171, 172, 193, 197,
198, 209, 301, 307, 343,
350, 375, 416, 428
042, 090, 097, 104, 107,
117, 134, 136, 139, 150,
153, 159, 162, 165, 171,
172, 185, 193, 197, 198,
209, 301, 307, 343, 350,
375, 416, 428, 433, 435,
437
049, 063, 076, 413
J.
.
JEAN
018
KYOTO
107
JEC
141
KYUSHU
426
JET POINT
365
JVC
018, 103, 123, 129, 143,
158, 170, 174, 182, 225,
364, 409, 433
L.
.
LECSON
049, 063
LEMAIR
210
A.1 Code list for television sets
049, 063, 107, 195, 408
050, 195
LESA
413
LEYCO
049, 063, 076, 094, 102,
431
LEYEO
076
LG (GOLDSTAR)
023, 049, 050, 055, 063,
107, 139, 152, 155, 168,
172, 195, 202, 203, 219,
254, 379, 413, 421
LIESENKOTTER
049, 063, 112
LIFETEC
049, 063, 076, 123, 195
LLOYD’S
195
LOEWE
049, 063, 089, 324, 391,
421
LOEWE OPTA
035, 046, 049, 052, 063,
065, 120, 144, 213, 324
LOGIC
331
LOGIK
032, 131, 158, 225, 364
LOGIX
195
LUMA
063, 107, 110, 133, 171,
172, 195, 210, 236, 242,
307
LUMATRON
049, 063, 076, 107, 172,
236, 242, 329, 379
LUX MAY
049, 063, 195
LUXOR
042, 050, 090, 107, 122,
127, 133, 139, 150, 155,
159, 165, 172, 185, 197,
209, 307, 312, 330, 416,
418, 428, 429
LYCO
076
MAGNAFON
MAGNAVOX
MANDOR
MANESTH
MANHATTAN
MARANTZ
MARELLI
MARK
MASUDA
MATSUI
MAXIMAL
MAXWELL
McMICHAEL
MEDIATOR
MEDION
MEGAS
MEGATRON
MELECTRONIC
MELVOX
MEMOREX
MEMPHIS
MERCURY
METZ
M.
.
M ELECTRONIC
003, 235, 375
MAAZ
371, 372
MADISON
049, 063
MAGNADYNE
045, 046, 047, 062, 065,
104, 107, 120, 139, 150,
168, 318, 324, 413
MICROMAXX
MINERVA
MINOKA
MISTRAL
045, 046, 050, 068, 075,
090, 120, 235, 336, 379,
407
018, 042, 049, 063
076
063, 076, 094, 113, 134,
141, 379
049, 063, 195
063
324
063, 195, 379
123, 195, 225
001, 004, 018, 041, 049,
050, 063, 094, 100, 102,
106, 107, 131, 134, 141,
143, 150, 171, 179, 180,
195, 209, 218, 225, 229,
232, 244, 245, 246, 307,
314, 331, 379, 380, 416,
431
119, 139
371, 372
192
049, 063, 112
049, 063, 195
435
126, 212
003, 049, 063, 074, 182,
195, 210, 375, 379, 408,
413, 416, 428, 429
425,
099, 195
102, 195, 213
049, 063, 195
019, 049, 051, 053, 065,
067, 070, 092, 118, 244,
245, 246, 247, 324, 412
049, 063, 195
019, 053, 080, 090, 118,
232, 244, 245, 246, 247,
248, 249, 340, 341, 406,
407
049, 063, 419, 426
158
A Universal Remote Control
LENCO
LENOIR
77
78
Universal Remote Control
MITSUBISHI
013, 018, 019, 021, 049,
063, 065, 105, 124, 131,
132, 143, 157, 164, 183,
190, 244, 245, 246, 252,
326, 330, 331
MIVAR
043, 046, 050, 058, 072,
081, 090, 120, 155, 318,
337, 379, 391, 407, 421,
434
MONACO
195
MORGAN’S
049, 063
MOTION
407
MOTOROLA
190
MTC
049, 063, 379, 416, 421
MTEC
106
MULTISTANDARD
045
MULTITEC
049, 063, 195
MULTITECH
031, 045, 046, 049, 050,
063, 120, 189, 195, 379,
392, 413, 416, 421
MURPHY
102, 104, 105, 107, 117,
171, 254, 307, 379, 408
MURPHY (UK)
162
MUSIKLAND
123
NEI
NESCO
NETSAT
NETWORK
NEUFUNK
NEW WORLD
NEWTECH
NICAMAGIC
NIKKAI
NIKKIA
NOBLEX
NOBLIKO
NOGAMATIC
NOKIA
NORDMENDE
N.
.
NAD
172, 209
NAIKO
049, 063
NAKIMURA
049, 063
NAONIS
036, 040, 071, 079, 110,
171
NAT
085, 149, 151
NATIONAL
033, 085, 104
NEC
018, 049, 063, 113, 131,
143, 177, 195, 379, 380
NECKERMANN
002, 012, 049, 050, 063,
065, 107, 133, 139, 163,
180, 189, 210, 247, 250,
307, 312, 324, 357, 379,
413, 416, 421
NEDIATOR
063
NOVATRONIC
063, 125, 225
042, 413
049, 063
213
049, 063, 195, 435
123
049, 050, 063, 182, 195,
379
379
018, 049, 063, 076, 102,
123, 139, 141, 195, 213,
379
066
049, 063, 076, 359, 360
044, 045, 050, 075, 080,
090, 235, 379, 406, 407
029, 034, 074, 182, 186,
424
090, 104, 107, 117, 134,
136, 139, 150, 153, 157,
159, 162, 165, 171, 172,
193, 197, 198, 209, 301,
307, 330, 343, 350, 416,
419, 428, 429, 433, 437
017, 029, 034, 038, 049,
063, 074, 083, 130, 150,
165, 174, 182, 186, 218,
244, 245, 246, 304, 307,
333, 334, 424
003, 020, 049, 063
O.
.
OCEANIC
OCEANIC(F)
ODEON
OKANO
OMEGA
ONCEAS
ONWA
OPERA
OPTIMUS
OPTONICA
086, 094, 104, 107, 108,
109, 116, 139, 159, 172,
209, 425
150
076
049, 063, 076, 102, 421
076
050
031, 123, 225, 432
049, 063
099, 315
190
A.1 Code list for television sets
79
049, 063
PAUSA
195
004, 042, 045, 049, 051,
063, 076, 094, 113, 131,
134, 139, 150, 179, 191,
195, 199, 216, 314, 331,
366, 367, 426
PAUZA
195
PERDIO
049, 063, 102, 107, 113
PERFEKT
049, 063
PERSHIN
425
PHILCO
002, 016, 044, 049, 054,
063, 065, 090, 093, 094,
104, 107, 126, 142, 163,
168, 189, 212, 324, 369,
407, 413, 421
PHILHARMONIC
379
PHILIPS
015, 022, 049, 050, 063,
065, 079, 089, 111, 112,
157, 158, 160, 175, 182,
188, 192, 215, 217, 220,
221, 247, 250, 313, 324,
337, 342, 350, 363, 374,
427
PHOENIX
049, 050, 063, 075, 102,
104, 107, 113, 148, 324,
379, 392, 421
PHONOLA
022, 050, 063, 065, 079,
112, 158, 160, 188, 250,
324, 379
PILOT
049, 063
PIONEER
049, 063, 074, 172, 182,
209, 218, 227, 307, 421,
427
ORLINE
049, 063, 123
ORMENTI-PHOENIX
104
ORMOND
195
OSAKA
066
OSAKI
049, 063, 066, 076, 102,
106, 123, 379, 426
OSIO
049, 063, 155
OSO
123
OSUME
018, 102, 123, 302
OTTO VERSAND
012, 018, 049, 050, 053,
063, 074, 094, 104, 107,
113, 134, 139, 143, 172,
190, 244, 245, 246, 247,
250, 312, 357, 362, 379,
413, 414, 416
P.
.
P.T ACTRON
111
PAEL
050, 075, 379
PALLADIUM
012, 049, 063, 107, 163,
210, 247, 324, 357, 379,
413, 416, 421
PIONIER
392, 421
PLANTRON
049, 063, 076, 195
049, 055, 063, 076, 379,
426
PLAYSONIC
379
POLICOM
074
049, 063, 076, 195, 379,
413
POPPY
195
POWERPOINT
232
PANASONIC
049, 063, 099, 104, 107,
137, 139, 149, 151, 172,
397, 398, 400, 401, 405
PRANDONI-PRINCE
044, 046, 075, 090, 120,
171, 172, 307, 407, 413
PRECISION
379
PANAVISION
049, 063, 210
PREMIER
142
PATHE CINEMA
107, 113, 121, 379, 391,
411, 416, 425
PRIMA
076, 195, 307
PRINCE
044, 046, 075, 171
PATHE CINEMA(F)
050, 168
PRINZ
102, 185, 416
PATHE MARCONI
029, 034, 074, 182, 186,
415, 424
PROFEX
107, 139, 195
PROFI-TRONIC
045, 049, 063
PALSONIC
PANAMA
A Universal Remote Control
ORBIT
ORION
80
Universal Remote Control
PROLINE
030, 049, 102, 112, 191,
366, 436
RBM (UK)
147
RCA
190, 218, 436
049, 063, 085, 149, 151,
195, 225, 379, 421, 431
RECOR
049, 063
RECTILIGNE
049, 063
PROTECH
045, 063, 076, 139, 163,
195, 379, 413, 416
REDIFFUSION
018, 059, 105, 139, 171,
172, 307, 343
PROVISION
049, 063
REDIFFUSION (UK)
150, 162
PYE
050, 063, 065, 079, 112,
157, 158, 160, 188, 250
REDIFUSION
104, 105
REDSTAR
049, 063
049, 063, 112, 195, 324
REFLEX
049, 063
REVOX
049, 063, 421
REX
036, 040, 063, 071, 079,
095, 107, 110, 171, 210,
236, 242, 243, 305, 307,
323, 338, 413
PROSONIC
PYMI
Q.
.
QUADRA VISION
425
QUASAR
045, 046, 068, 075, 099,
155, 413
QUELLE
003, 018, 019, 020, 049,
050, 053, 063, 074, 075,
076, 078, 080, 090, 091,
094, 113, 115, 117, 118,
131, 139, 146, 147, 150,
153, 155, 172, 195, 206,
235, 244, 245, 246, 247,
254, 301, 319, 320, 340,
341, 379, 406, 408, 413,
416
RFT
076, 102, 390, 391, 392,
393, 394, 395, 421
R-LINE
049, 063
ROADSTAR
031, 049, 063, 076, 163,
195
ROBOTRON
056, 065, 324
RODEX
049, 063
ROTEL
302
ROWSONIC
050
ROYAL LUX
421, 426
018
RTF
056, 065
QUESTA
R.
S.
.
.
SABA
045, 046, 047, 062, 063,
065, 104, 105, 150, 168,
324, 413
014, 017, 029, 034, 038,
046, 065, 074, 077, 107,
120, 133, 139, 172, 182,
186, 218, 304, 307, 324,
333, 334, 424, 436
SACCS
121
RADIONETTE
003, 020, 117, 150
SAGEM
006, 380, 435
RADIO SHACK
049, 063
SAISHO
RADIOTONE
049, 063, 076, 163, 195,
421, 426, 431
004, 050, 076, 084, 107,
131, 132, 134, 179, 195,
233, 307, 330, 331, 379
RAMK
341
SALORA
RANDT
029
RANK
147, 406
RBM
341
033, 075, 107, 127, 133,
136, 139, 148, 150, 153,
171, 172, 185, 198, 209,
301, 307, 312, 416, 418,
419
RADIALVA
049, 063, 074, 107, 123
RADIOLA
050, 063, 065, 079, 112,
158, 160, 188, 250, 342
RADIOMARELLI
A.1 Code list for television sets
SAMBERS
81
SENTRA
123, 139, 141, 195
SERINO
380, 435
SAMSUNG
050, 063, 066, 076, 102,
155, 189, 195, 217, 359,
360, 365, 379, 421
SHARP
018, 094, 143, 170, 190,
206, 214, 302, 362, 364
SHORAI
042, 094
SANDRA
379
SIAM
049, 063
SANELA
411
SIAREM
SANSUI
049, 063, 225
045, 046, 065, 104, 107,
120, 139, 324
SANTON
195
SICATEL
121
SIEMENS
003, 018, 019, 023, 049,
053, 063, 066, 113, 118,
206, 244, 245, 246, 247,
248, 249, 302, 307
SIERA
050, 063, 065, 079, 112,
158, 160, 188
SIERRA
049, 063, 112
SIESTA
421
SILVA
049, 063, 379
SILVER
018, 042, 049, 063, 076,
172
SINGER
045, 047, 049, 063, 065,
104, 195, 324, 369, 413,
425
SINUDYNE
004, 031, 045, 051, 063,
065, 094, 104, 107, 134,
139, 150, 172, 210, 216,
236, 314, 324, 357, 366,
367, 416
SANYO
003, 018, 020, 041, 049,
050, 056, 063, 065, 102,
107, 117, 131, 143, 189,
195, 198, 201, 206, 209,
302, 320, 325, 331, 351,
379, 391, 408, 421
SAVE
049, 063
SBR
063, 112, 157, 158, 192,
313
SCHAUB LORENZ
SCHNEIDER
090, 104, 136, 139, 153,
159, 162, 171, 198, 307,
416, 433
031, 040, 050, 063, 065,
069, 079, 095, 104, 107,
112, 114, 139, 148, 156,
158, 160, 168, 172, 182,
188, 195, 225, 242, 243,
250, 307, 328, 342, 379,
413, 414, 416, 423
SCOTT
SKANTIC
042, 327
307, 418
SKY
049, 063
SEARS
042
SOGERA
113
SEG
018, 045, 049, 050, 056,
063, 076, 107, 172, 195,
232, 379, 413
SOLAVOX
066, 102, 107, 123, 139,
172, 307
SONITRON
209, 379, 421
SEI
004, 045, 049, 051, 063,
094, 107, 139, 236, 314,
324, 357, 416
SONNECLAIR
049, 063
SONOKO
006, 050, 063, 076, 195,
379
SEL SINUDYNE
250
SONOLOR
SELECO
036, 040, 063, 071, 079,
095, 107, 110, 171, 172,
210, 236, 242, 243, 305,
307, 323, 338, 339, 369
012, 107, 139, 159, 172,
209, 357, 425
SONTEC
049, 063, 094, 421
SONY
012, 018, 028, 045, 131,
143, 204, 208, 211, 331,
357, 358, 370
SENCORA
195
A Universal Remote Control
045, 046, 068, 075, 090,
120, 155, 336, 407
82
Universal Remote Control
SOUND & VISION
031, 045, 123
SOUND WAVE
049, 113, 163
TEC
040, 050, 064, 168, 195,
213, 218, 242, 243, 379,
413
SOUNDESIGN
042
SPECTRA
195
TECH LINE
049, 063, 195
TECHICA
SSANGYONG
195
123
TECHNEMA
STANDARD
049, 050, 063, 113, 123,
195, 379
113
TECHNICS
099, 315
TEDELEX
379
STARLIGHT
049, 063, 076, 107, 195
TEIRON
195
STENWAY
006, 031, 123
TEKNIKA
042, 327
STERN
036, 040, 063, 071, 079,
095, 107, 110, 171, 236,
242, 243, 305, 307, 323,
338
TELEAVIA
029, 034, 074, 182, 186,
415, 424
TELECOR
049, 063, 107, 123, 242,
379, 423
STRATO
049, 063, 076, 195
TELEFUNKEN
SUNKAI
049, 063, 094, 123, 134,
179, 191, 232, 314, 367
032, 049, 063, 064, 074,
082, 182, 186, 187, 218,
392, 424, 436
SUNSTAR
049, 063, 195, 225, 431
TELEFUSION
049, 063
TELEGAZI
049, 063, 076, 107, 123,
242
TELEMEISTER
049, 063, 113
TELESONIC
049, 063
SUNWOOD
049, 063, 195
SUPERLA
379
SUPERTECH
049, 063, 123, 195, 379
SUPRA
195
TELESTAR
049, 063
SUSMU
218
TELETECH
049, 063, 195, 213, 413
SUTRON
195
TELETON
SWISSLINE
413
018, 067, 107, 236, 242,
379, 416
SYDNEY
379
TELEVIDEON
SYTONG
425
050, 075, 104, 107, 113,
148, 379
TELEVISO
425
TEMCO
094
TEMPEST
049, 063, 195
TENNESSEE
049, 063
TENSAI
003, 020, 050, 055, 063,
094, 113, 117, 123, 195,
225, 379, 408, 413
T.
.
TACTUS
106
TANDBERG
065, 074, 078, 172, 182,
210, 213, 304
TANDY
050, 096, 102, 123, 190,
307, 379, 413
TETUNG
046
TASHIKO
018, 050, 107, 143, 177,
192, 201, 379, 419
TEVION
049, 063, 195
TEXET
050, 195, 379
TATUNG
049, 050, 063, 102, 106,
111, 120, 131, 200, 253,
331, 379
THOMSON
TEAC
049, 063, 076, 195, 380,
416, 426
008, 010, 017, 024, 029,
034, 049, 063, 064, 074,
134, 147, 174, 182, 186,
218, 230, 234, 304, 309,
333, 334, 415, 424, 436
A.1 Code list for television sets
THORN
049, 053, 063, 103, 106,
141, 158, 218, 222, 321,
329, 408, 409, 411, 419
THORN-FERGUSON
032, 073, 074, 076, 080,
082, 103, 121, 158, 306,
319, 321, 322, 328, 329,
357, 358, 364, 375
THRON
117
TMK
143
TOKAI
049, 063, 102, 107, 195,
213, 379
UTAX
TOKYO
141, 379
TOMASHI
006, 031, 123
VEGAVOX
VESTEL
TOSHIBA
001, 018, 045, 128, 141,
143, 147, 205, 341, 369,
379, 406
TOWADA
045, 379, 416
TOYODA
195
TRAKTON
076
TRANS CONTINENS
044, 046, 049, 063, 075,
171, 307, 379
TRANSONIC
049, 063, 380
TRANSTEC
379
TRIDENT
379
TRISTAR
123, 364
TRIUMPH
004, 046, 049, 063, 128,
147, 197, 235, 339, 375
.
UHER
ULTRAVOX
UNIVOX
003, 004, 012, 018, 020,
049, 063, 074, 076, 094,
107, 131, 155, 163, 165,
172, 195, 202, 206, 210,
213, 235, 244, 245, 246,
320, 357, 375, 379, 406,
407, 408, 413, 416, 421,
428, 429, 437
049, 063, 107, 121, 213,
324, 409, 411
050
V.
.
VEXA
VICTOR
VIDEO SYSTEM
VIDEOLOGIQUE
VIDEO SYSTEM
VIDEOTECHNIC
VIDEOTON
VIDIKRON
VIDTECH
VIPER
VISIOLA
VISION
VISTAR
VOLTEC
VORTEC
VOXSON
163
049, 063, 107, 125, 364,
379
063, 195
174
049, 063
031, 123, 379
049, 063
113, 379
107, 418
045
018
213
379
049, 063, 113
172, 236
074
063
049, 063, 065, 090, 163,
171, 307, 324, 407
W.
.
049, 063, 069, 080, 090,
113, 147, 148, 163, 236,
242, 307, 392, 407, 414,
421
044, 045, 047, 049, 050,
063, 065, 104, 107, 133,
139, 324, 379, 413
UMA
305
UNIC LINE
049, 063, 165
UNITED
049, 063
WALTHAM
WATSON
WATT RADIO
WEGA
WEGA COLOR
049, 063, 163, 182, 307,
379, 418
049, 063, 107, 113, 123,
195, 244, 245, 246, 423,
431
045, 050, 068, 104, 107,
121, 139, 150, 336, 379,
416
018, 049, 063, 139, 143,
324
065, 088
A Universal Remote Control
U.
UNIVERSUM
83
84
Universal Remote Control
WEGAVOX
195
WELTBLICK
063, 113
WESTINGHOUSE
063, 094
WESTON
WHARFEDALE
WHITE
045
WHITE WESTINGHOUSE
049, 050, 063, 113, 213,
379
WINCO
426
WINDSTAR
006
WINTERNITZ
361
Y.
.
YAMISHI
006, 049, 063, 123, 379,
380
168
YOKAN
049, 063
049, 063
YOKO
049, 050, 063, 076, 123,
195, 379, 413, 421
YORX
123
X.
Z.
.
ZANUSSI
036, 040, 063, 071, 079,
095, 110, 171, 236, 305,
307, 323, 338, 379
ZOPPAS
036, 040, 071, 079, 110,
171, 307
.
XRYPTON
049, 063
A.2 Code list for DVD players
85
A.2 Code list for DVD players
3 DLAB
072
JVC
006
K.
A.
.
.
AIWA
075
KENWOOD
007, 034, 043, 050, 069
ALBA
087
KISS
077
AMSTRAD
085
L.
A-TREND
086
B.
.
BLUE SKY
BUSH
080
078, 079, 082, 085
C.
.
082
CYBER HOME
086
D.
.
DAEWOO
083
DENON
002, 019, 022, 034, 051
DENVER
082
DENZEL
077
DIGITOR
079
DIVIDO
083
DUAL
076, 077
E.
LAWSON
083
LECSON
081
LENCO
082
LG (GOLDSTAR)
005, 055, 064, 070
LIFETEC
076
LOGIX
083
M.
.
MAGNAVOX
009, 033, 056
MANHATTAN
083
MARANTZ
033, 059, 072
MATSUI
076, 080
MEDION
076, 083
MICROMEDIA
009
MICROMEGA
072
MINOWA
083
MITSUBISHI
023, 036
MONYKA
077
N.
.
.
ELTA
079
NAD
010, 062
ENZER
077
NEUFUNK
077
G.
O.
.
.
GE
003, 004
ONKYO
009, 015, 048
GRUNDIG
072, 080
OPTIMUS
050
ORION
080
ORITRON
076
H.
.
HARMAN KARDON
001, 066
HITACHI
077
P.
.
J.
PANASONIC
024, 025, 030, 034, 035,
044, 052
PHILIPS
009, 033, 056, 072
.
JMB
080
A Universal Remote Control
CINE ULTRA
.
86
Universal Remote Control
PHONOTREND
082
TEAC
087
PIONEER
010, 012, 020, 038, 041,
046, 065, 071, 074
TECHNICS
034
TENSAI
076, 079
PROLINE
076
TEVION
076
PROSCAN
003, 004, 037
THOMSON
003, 004, 073
PROVISION
082
TOKAI
077
TOKIWA
083
R.
.
RAITE
077
TOSHIBA
009, 010, 033, 057, 058
RCA
003, 004, 018, 037
TV PROJECT
008
REC
034, 078
REVOY
082
ROADSTAR
078, 079, 082
U.
.
UNIVERSUM
085
W.
S.
.
.
SANSUI
080
WALKVISION
087
SCAN
083
WESDER
082
SCHNEIDER
076
WHARFEDALE
081
SEG
077, 085
SHARP
021, 028, 050
SHINCO
087
YAMAHA
016, 017, 030, 034, 063
SM ELECTRONIC
079
YAMAKAWA
077, 084
SONY
015, 029, 043, 045, 067
STANDARD
076
Y.
.
Z.
.
T.
.
ZENITH
005, 009, 033, 055, 064,
083
A.3 Code list for audio-video receivers
A.3
87
Code list for audio-video receivers
A.
H.
.
.
ADCOM
082, 092, 225, 161, 023,
148, 149
HARMAN_KARDON
231, 233, 153, 154, 118,
119
AIWA
170, 018, 104, 202, 203,
213, 211, 188
HITACHI
020
AKAI
189
ANTHEM
127, 128
ARCAM
141, 255
ATLANTIC_TECHNOLOGY 134
AUDIO_FILE
071
I.
.
INTEGRA
029
J.
.
JVC
163, 191, 114, 034, 091
K.
.
B.
.
096, 097
BOSE
070, 170, 224, 147, 227,
199
BOSTON_ACOUSTICS
246
KENWOOD
026, 066, 145, 192, 182,
005, 037, 196, 252
KLH
123
KRELL
150, 072, 197, 222
L.
.
C.
.
CARVER
CLARION
006, 028, 061, 071, 201,
214, 226, 185, 022, 077,
050
LEXICON
120, 235, 236, 237, 159,
160
LINN
124, 206
LUXMAN
137, 139, 052, 165, 115,
004, 009
026
D.
M.
.
.
DELPHI
251
MAGNAVOX
086, 164, 152, 208
DENON
109, 215, 230, 234, 002,
121, 133
MARANTZ
006, 028, 031, 040, 063,
185, 186, 015, 056
MCINTOSH
238, 053
MERIDIAN
100, 012, 013
E.
.
ELAN
057, 090
MITSUBISHI
242, 243, 204
ESCIENT
229
MONDIAL
157, 158, 042, 043, 081,
112
MYRYAD
030, 099
F.
.
FISHER
047, 214, 182
FLEXTRONICS
207
FOSGATE_AUDIONICS
231, 134
N.
.
G.
NAD
186, 113, 038, 216, 210
NAKAMICHI
111, 244, 245, 172, 183,
054
NIRO
135
.
GOLDSTAR
008
A Universal Remote Control
B&K
88
Universal Remote Control
NILES
241
O.
.
ONKYO
OPTIMUS
OUTLAW
029, 017, 046, 108, 080,
209
026, 041
134
P.
SAMSUNG
016
SANSUI
040, 048, 110, 065, 228,
063
SANYO
047, 059
SCOTT
019
SHARP
026, 094, 131, 175
SHERWOOD
024, 102, 106, 246
SONY
018, 247, 248, 166, 101,
184, 218, 025, 179, 180,
220
SOUNDESIGN
036
SUNFIRE
142, 143, 146
.
PANASONIC
032, 195, 219, 177, 098,
221
PARASOUND
129, 130, 132, 003, 103,
105, 125, 126
PHILIPS
249, 250, 063
PIONEER
014, 039, 044, 069, 168,
116, 035, 078
POLKAUDIO
251
PROCEED
144, 021
T.
.
TEAC
005, 019, 049, 111, 212,
217
TECHNICS
122, 193, 219, 178, 177,
200, 254, 007
THETA_DIGITAL
136
TOSHIBA
060, 087, 033
R.
.
RCA
010, 048, 117, 156, 067,
055
REALISTIC
019, 073, 075
ROTEL
074, 083, 085
RUSSOUND
223, 239
Y.
.
S.
.
YAMAHA
026, 253, 169, 067, 173,
205, 011, 232, 089, 027,
051, 181
Correct disposal of this product
This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end o ts working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where
they purchased this product or their local government
e for details of where and how
they can dispose this product for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
d Co., Ltd. may change or modify the hardware or
At any time during the life of a product T
software on any product to introduce new features or improve the functionality of the product.
Copyright © 2013, T
http://www.i-topfield.com
Co., Ltd. All rights reserved.
English version
">