FunRunner FunRunner 39A-001-000 Operator's Manual
PDF
Download
Document
Advertisement
Advertisement
OPERATOR’S MANUAL Utility Bed Model 39A-001-000 IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY FunRunner COMPANY P.O. BOX 360920 CLEVELAND, OHIO 44136 PRINTED IN U.S.A. FORM NO. 770-10439 (2/01) SECTION 1: CALLING CUSTOMER SUPPORT when you call. If you have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Support Department Toll Free at 1-866-FUN-RUNR or 1- (866)-386-7867 to reach a customer support representative. Please have your unit's model number and serial number ready SECTION 2: ASSEMBLY Removing The Trunk + Unlock trunk with key and lift lid to open. ‚ Loosen the set screw (allen wrench required) on each shift collar and slide hinge rod to one side to remove rod, spacers, and trunk lid. See Figure 1. Trunk Lid \>-Shift Collar > Hinge Rod + Secure the utility bed to the utility vehicle with the four machine screws and flat washers provided. See Parts Illustration. + Torque hardware to 40 - 45 in. lbs. + By removing or inserting the two pins on each side of the utility bed, the tailgate can be opened or locked. * The weight limit for the utility bed is 100lbs. WARNING: This utility bed is not intended A for passengers. Doing so can result in serious personal injury. WARNING: Do not exceed the load A capacity of 300 Ibs., which includes driver, accessories, and cargo. Figure 1 + Remove the trunk basket from the trunk opening and store with trunk lid and hinge rod. See Figure 2. + Remove the four screws and flat washers from around the trunk opening. ‚ Disconnect the trunk lock from the back of the vehicle by removing the two cap screws. Illustrated Parts 2 REF. PART NO. NO. DESCRIPTION 1. 1607-0013 Utility Box Assembly 2. 1710-1832 Machine Screw 1/4-20 x 2” 3. 1736-0173 Flat Washer .28 ID x .74 OD Trunk Basket Screws Flat Washer % м ай - BH | N S > Trunk Lock = Figure 2 Attaching The Utility Bed ‚ Place the utility bed over the trunk opening, aligning the holes in the utility bed with the holes in rear body panel. See Front Cover Illustration. ">

Public link updated
The public link to your chat has been updated.
Advertisement