CJ-Series CPU units

CJ-Series CPU units
Automation systems
Системи за автоматизация - OMRON - програмируеми логически контролери PLC,
програмируеми сензорни терминали - тъч скрийн панели HMI и др.
SMART PLATFORM
One software – One connection – One minute
Omron‘s Smart Platform is designed to make machine automation easy. It provides seamless, drag-and-drop
integration of all automation components in your machine. From sensor to controller, from HMI to drive, all devices are
accessible through one connection using a single software suite, CX-One.
Built-in distributed intelligence in Omron devices means less time programming and troubleshooting.
Everyone claims ease of use, a short movie explains how easy programming and configuration really can be:
www.smartplatform.info
СИТЕЛ ООД - OMRON
www.sitel-omron.com
дистрибутор
София - бул. Цариградско шосе 113А, ет.3,
Пловдив - ул. Белград 2, ет. 2, офис 104
офис 5 /в Лито Балкан, зад Shell и The Mall/
тел./факс: (02) 975 2282
[email protected]
(до Новотела)
тел./факс: (032) 96 91 55
[email protected]
Плевен - бул. Русе 37А, ет. 3, офис 2
Стара Загора - ул. Захарий Княжески 21, ап. 5
тел./факс: (042) 62 11 65
[email protected]
тел./факс: (064) 81 58 70
[email protected]
6
Machine automation controller
Контролери за машинна автоматизация
Product overview
Machine controller
8
NJ-Series
Programmable logic controllers (PLC)
Програмируеми логически контролери
Product overview
Selection table
Compact PLC
Modular PLC
Rack PLC
1
10
Сензорни тъч терминали (дисплеи)
4
Product overview
52
Selection table
54
PC based HMI
2
HMI-Connection
12
Integrated controller
14
Scalable HMI
Dyalox
57
61
NSJ12/NSJ10
62
NSJ8/NSJ5
64
NS15/NS12/NS10/NS8
66
CPM2C CPU units
16
CPM2C expansion units
17
NS5
67
CP1E CPU units
18
NS5 handheld
68
CP1L CPU units
20
Accessories NSJ/NS
69
CP1H CPU units
22
Integrated controller/
Scalable HMI
Compact HMI
NB series
70
CP1W expansion units
23
Function-key HMI
NT11
72
CJ-Series CPU units
24
NT2S
73
CJ-Series power supplies, expansions
26
NA series
75
CJ-Series digital I/O units
27
CJ-Series analogue I/O and control units
28
CJ-Series motion/position control units
30
CJ-Series communication units
32
CS-Series CPU units
33
CS-Series power supplies, backplanes
34
CS-Series digital I/O units
35
CS-Series analogue and process I/O units
36
CS-Series position/motion control units
38
CS-Series communication units
39
Remote I/O
Отдалечени входно / изходни модули
Sysmac machine interface
Cables and accessories
Кабели и аксесоари
5
I/O cables and terminal
blocks
I/O cables
76
I/O terminal blocks
84
Ethernet cables and
accessories
Ethernet cables
85
Accessories
86
Wireless communication
WE70
87
3
Product overview
40
Selection table
42
Remote I/O
Human machine interfaces (HMI)
NX-series modular I/O system
43
SmartSlice I/O system
45
Compact I/O GX-series
46
Compact I/O DRT2
47
Compact I/O CRT1
48
Compact I/O SRT2
49
Field I/O DRT2-_C_
50
Field I/O SRT2-_C_
51
7
Automation systems
Системи за автоматизация
Automation systems – Table of contents
Machine automation controller
NJ-SERIES MACHINE AUTOMATION CONTROLLER
Complete and robust machine automation
The NJ-Series Machine A utomation Controller is at the heart of the new Sysmac platform. One in tegrated machine controller
that o ffers speed, f lexibility and s calability of software centric architecture without compromising on the traditional reliability
and robustness that you have come to expect from Omron PLCs. The NJ-Series is de signed to meet extreme machine control
requirements in terms of motion control speed and ac curacy, communication, security and robust system. You just create…
• Integration of logic and motion in one Intel CPU
• Scalable control: CPUs for 4, 8, 16, 32 and 64 axes
• EtherCAT and EtherNet/IP ports embedded
• Fully conforms to IEC 61131-3 standards
• Certified PLCopen function blocks for motion control
• Linear, circular and spiral (helical) interpolation
• CPU units with SQL client and robotic functionality
8
Machine automation controller
1
Type of CPU needed?
Standard NJ
(Sequence and Motion
functionality)
NJ Robotics
(Sequence, Motion and
Robotics functionality)
up to 8 axes
up to 64 axes
NJ3 series
NJ5 series
NJ SQL client
(Sequence, Motion and
SQL client functionality)
· NJ5
· NJ5 Robotics
· NJ5 SQL Client
Page 10
Page 10
9
NJ-Series
Машинен контролер
Machine controller
Complete and robust machine automation
The NJ-Series is designed to meet extreme machine control requirements in terms
of motion control speed and accuracy, communication, security and robustness.
•
•
•
•
•
•
•
Integration of logic and motion in one Intel CPU
Scalable control: CPUs for 4, 8, 16, 32 and 64 axes
EtherCAT and EtherNet/IP ports embedded
Fully conforms to IEC 61131-3 standards
Certified PLCopen function blocks for motion control
Linear, circular and spiral (helical) interpolation
CPU units with SQL client and robotic functionality
Ordering information
Sysmac Studio
NS HMI
Remote access
Industrial switching hubbs
Ethernet cable
NJ-Series
Machine automation controller
End cover
(included
with the CPU)
NJ-Series
power supply
unit
NJ-Series
CPU unit
CJ-Series
units
EtherCAT cable
Accurax G5
servo drive
ADR
ADR
EtherCAT
junction
slave
NX-Series I/O
MX2 inverter
Accurax G5
servo motors
10
Accurax
linear motors
FQ-M
vision
NJ-Series
Машинен контролер
Machine controller
Type
Output capacity
at 5 VDC
100 to 240 VAC 6.0 A
Output capacity
at 24 VDC
Max. output Features
power
Size in mm (H × W × D)
Order code
1.0 A
30 W
90 × 70 × 90
NJ-PA3001
Run output
24 VDC
Machine controller
Power supply
NJ-PD3001
CPU
Description
Max. Digital I/O
points
Program
capacity
Variables capacity Max. I/O units
NJ5 series
Sequence and
motion functionality
2,560
20 MB
2 MB: Retained
4 MB: Not retained
5 VDC current
consumption
CPU rack: 10 units max. 1.90 A
Expansion rack:
40 units max.
(up to 3 expansion racks)
Size in mm
(H × W × D)
Number
of axes
Order code
90 × 90 × 90 64
NJ501-1500
32
NJ501-1400
16
NJ501-1300
64
NJ501-4500
32
NJ501-4400
16
NJ501-4300
Sequence, motion and
robotics functionality
1
Series
NJ501-4310*1
Sequence, motion and
SQL client functionality
NJ3 series
*1
Sequence and
motion functionality
5 MB
0,5 MB: Retained
2 MB: Not retained
64
NJ501-1520
32
NJ501-1420
16
NJ501-1320
8
NJ301-1200
4
NJ301-1100
The NJ501-4310 CPU unit only supports one delta robot.
Note: The end cover unit CJ1W-TER01 is included with the CPU unit.
Accessories
Type
Remarks
Size in mm (H × W × D)
Order code
EtherCAT branching unit
3 ports, 24 VDC, DIN rail mounting
90 × 25 × 78
GX-JC03
6 ports, 24 VDC, DIN rail mounting
90 × 48 × 78
GX-JC06
3 ports, 24 VDC, DIN rail mounting
90 × 25 × 78
W4S1-03B
5 ports, 24 VDC, DIN rail mounting
90 × 48 × 78
W4S1-05B
5 ports, 24 VDC, failure detection, DIN rail mounting
90 × 48 × 78
W4S1-05C
Industrial switching hub
SD memory card
2 GB
HMC-SD291
DIN track
Length: 0.5 m, height: 7.3 mm
PFP-50N
Length: 1 m, height: 7.3 mm
PFP-100N
Length: 1 m, height: 16 mm
PFP-100N2
End plate to secure the units on the DIN track
2 pieces are included with the CPU unit and I/O interface unit
PFP-M (2 pcs.)
Battery for NJ-series CPU unit
The battery is included with the CPU unit
CJ1W-BAT01
End cover
The end cover is included with each CPU unit and I/O interface unit
CJ1W-TER01
Computer software
Specifications
Order code
Sysmac Studio
SYSMAC-SE2___
11
Програмируем логически контролер
Programmable logic controllers (PLC)
KNOW ONE... KNOW THEM ALL!
Whether your automation requires a simple and economical solution, or your target is advanced, high-speed control,
you can find what you need in Omron's line-up of Programmable Controllers.
And if your systems grow, or change due to market demand, you will find that only Omron offers a full range of Compact PLCs
and Modular PLCs that share the same architecture. Therefore your programs are fully upward compatible, both in memory
allocation and instruction set.
• One scalable PLC family to always match exactly with your application
• Transparent communication routing through different networks
• The best size/performance ratio in the industry
Compact
Max. I/O size?
12
up to 180
up to 180
up to 192
up to 320
CP1E
CP1L
CPM2C
CP1H
Page 18
Page 20
Page 16
Page 22
PLC
2
Type of PLC needed?
Modular
Rack
Max. I/O size?
Max. I/O size?
up to 640
up to 2560
up to 5120
Dual
redundancy
High-speed
synchronous I/O
CJ1M
CJ2M
CJ2H
CS1G/H
CS1D
Page 24
Page 24
Page 24
Page 33
Page 33
13
Selection table
Програмируем логически контролер
Compact PLC series
Model
CPM2C
Max digital I/O points*1 192
Built-in
Digital I/O 10 to 32
CP1E
CP1L
180
320*2
10 to 60
10 to 60
20 or 40
Interrupt inputs 2 or 4
4 or 6
2, 4, or 6
6 or 8
Counter inputs 2 or 4
5 or 6
4
2 or 4
Pulse outputs*1 2
2
2
2 or 4
USB port
Expansion I/O units
Quick-response inputs
High-speed counter
Pulse output with PWM
RS-232C port
RS-485 port
Real time clock
2 Analogue adjusters
See Analogue I/O section
USB or Ethernet port
Expansion I/O units
Quick-response inputs
High-speed counter
Pulse output with PWM
Up to 2 serial option boards
Real time clock
1 Analogue adjuster
See Analogue I/O section
USB port
Expansion I/O units
CJ-series Special I/O Units
CJ-series CPU Bus Units
Quick-response inputs
High-speed counter
Pulse output with PWM
RS-232C port
Option board slots
Real time clock
1 Analogue adjuster
LED display, 2 digit
See Analogue I/O section
1.19 μs
0.55 μs
0.10 μs
Program memory 4K words
2 or 8K steps
5 or 10K (+10K Function block) steps 20K steps
Data memory 2K words
2 or 8K words
10 or 32K words
32K words
–
Memory cassette
Memory cassette
CPU
features*1
Compact size
Expansion units
Quick-response inputs
High-speed counter
Pulse output with PWM
RS-232C port
Real time clock
Instruction Execution time 0.64 μs
(bit instruction)
External memory Expansion memory unit
Analogue I/O Analogue I/O unit
Temperature sensor unit
Built-in for E-NA model (2 in + 1 out) Built-in for EL/EM model (2 inputs)
Analogue I/O Expansion Units
Analogue I/O Expansion Units
Temperature Input Expansion Units
Temperature Input Expansion Units
Special function units –
Fieldbus master –
Fieldbus I/O CompoBus/S
DeviceNet
Page 16
*1
*2
14
CP1H
180
Built-in for XA model (4 in + 2 out)
Analogue I/O Expansion Units
Temperature Input Expansion Units
CJ Analogue I/O Units
CJ Temperature Units
CJ-series Special I/O Units
CJ-series CPU Bus Units
ModBus
Ethernet
ModBus
Ethernet
EtherNet/IP
Controller Link
DeviceNet
PROFIBUS-DP
PROFINET
ModBus
CompoNet
CompoBus/S
CAN (freely configurable)
PROFIBUS-DP
CompoBus/S
DeviceNet
PROFIBUS-DP
CompoBus/S
DeviceNet
PROFIBUS-DP
CompoBus/S
DeviceNet
18
20
22
Some features listed are not available for all CPU types within each series. Please review specifications for more information on CPU features and performance.
Represents local I/O capacity. If a fieldbus master is used more I/O is possible.
Programmable logic controllers
Програмируем логически контролер
Rack PLC series
PLC
Modular PLC series
CJ1M/G
Built-in*1
Digital I/O 16
CJ2M
2560
USB port
Ethernet/IP port
High-speed I/O units
Option board plug-in
Structures and arrays
Tag data links
Compact size
No backplane required
Large program capacity
Function Block memory
Easy backups
Real time clock
USB port
Ethernet/IP port
High-speed I/O units
Structures and arrays
Tag data links
Synchronous I/O
Compact size
No backplane required
Extra Large program capacity
Easy backups
Real time clock
High I/O capacity
Inner board support
Large program capacity
Backwards compatible
Easy backups
Real time clock
Redundant CPU
Redundant power supply
Hot swapping
High I/O capacity
Inner board support
Large program capacity
Backwards compatible
Easy backups
Real time clock
0.04 μs
0.016 μs
0.04/0.02 μs
0.04/0.02 μs
5 to 60K steps
50 to 400K steps
10 to 250K steps
10 to 250K steps
64 to 160K words
160 to 832K words
64 to 448K words
64 to 448K words
Temperature control
High-speed counters (500 kHz)
SSI encoder input
Position control
Protocol macro
RFID sensor unit
High-speed I/O
Synchronised Position
Data collection & storage unit
Temperature control
SSI encoder input
High-speed counters (500 kHz)
Position control
Motion control
Process control
Protocol macro
RFID sensor unit
Data collection & storage unit
–
–
–
Pulse outputs 2
–
Instruction Execution time 0.10/0.04 μs
(bit instruction)
Program memory 5 to 60K steps
Data memory 32 to 128K words
CS1D
5120
Counter inputs 2
Compact size
No backplane required
Large program capacity
Easy backups
Built-in pulse I/O
Loop control CPU type
Real time clock
CS1G/H
5120
Interrupt inputs 4
CPU features*1
CJ2H
2560
2
Model
Max. digital I/O points*1 1280
CompactFlash memory Up to 512 MB
Analogue I/O Analogue I/O unit
Temperature sensor unit
Temperature control unit
Special function units Temperature control
High-speed counters (500 kHz)
SSI encoder input
Position control
Protocol macro
RFID sensor unit
Weighing unit
Data collection & storage unit
Fieldbus master Ethernet
EtherNet/IP
Controller Link
DeviceNet
PROFIBUS-DP
PROFINET
ModBus
CompoNet
CompoBus/S
CAN (freely configurable)
Fieldbus I/O DeviceNet
PROFIBUS-DP
CAN (freely configurable)
Page 24
*1
33
Some features listed are not available for all CPU types within each series. Please review specifications for more information on CPU features and performance.
15
CPM2C CPU units
Compact PLC
The versatile slim-line controller
An extensive range of models ensures efficient machine control in an ultra-compact
package. CPU units are available with relay or transistor output, terminal block or
various connector options, and an optional real-time clock function. Select the output
type, number of I/O points and other specifications to meet your needs. Expansion
I/O units with 8 to 32 I/O points make it possible to configure a control system with a
maximum of 192 I/O points.
•
•
•
•
•
Space-saving slim outline, high-density I/O
10-32 I/O points per CPU, transistor or relay outputs
20 kHz counter input, two 10 kHz pulse outputs integrated
Two communication ports built-in, freely accessible
Digital, analogue, and fieldbus expansion units
Ordering information
Input
points
6 points
Output
points
Program
capacity
Data
memory
capacity
Logic
execution
speed
Size in mm
(H × W × D)
I/O Connectors
4 points 4K words
2K words
0.64 μs
90 × 33 × 65
2 Terminal blocks Relay
2 Fujitsu (24 pt)
2 MIL (20 pt)
12 points
8 points 4K words
2K words
0.64 μs
90 × 33 × 65
2K words
0.64 μs
90 × 33 × 65
Order code
1 Encoder input (20 kHz)
–
CPM2C-10CDR-D
Yes
CPM2C-10C1DR-D
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-10CDT1C-D
Yes
CPM2C-10C1DT1C-D
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-10CDT1M-D
Yes
CPM2C-10C1DT1M-D
1 Encoder input (20 kHz)
–
CPM2C-20CDR-D
Yes
CPM2C-20C1DR-D
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-20CDT1C-D
Yes
CPM2C-20C1DT1C-D
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-20CDT1M-D
Yes
CPM2C-20C1DT1M-D
2 Fujitsu (24 pt)
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-32CDT1C-D
2 MIL (20 pt)
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
–
CPM2C-32CDT1M-D
6 points
4 points 4K words
2K words
0.64 μs
90 × 40 × 65
1 Fujitsu (24 pt)
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
Programmable Slave with
DeviceNet slave and
CompoBus/S Master
Yes
CPM2C-S110C-DRT
6 points
4 points 4K words
2K words
0.64 μs
90 × 40 × 65
1 Fujitsu (24 pt)
Transistor
(source type)
1 Encoder input (20 kHz)
2 Pulse output (10 kHz)
CompoBus/S Master
Yes
CPM2C-S110C
Note: All CPU's are available only with DC supply voltage (CPM2C-PA201 can be used as power supply).
CPU's with sourcing transistor outputs are also available with sinking transistor outputs.
MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1).
For I/O Cables and Terminal Blocks, see page 76
16
Real time
clock
Transistor
(source type)
2 MIL (20 pt)
16 points 4K words
Built-in functions
Transistor
(source type)
2 Terminal blocks Relay
2 Fujitsu (24 pt)
16 points
Output method
CPM2C expansion units
Compact PLC
Expand the capacity of your CPM2C PLC
2
PLC
Expansion I/O units with 8 to 32 I/O points make it possible to configure a control
system with a maximum of 192 I/O points
Ordering information
Unit
Output type
I/O Connectors
Inputs
Outputs
Order code
Expansion I/O units
–
1 Fujitsu (24 pt)
8
–
CPM2C-8EDC
16
–
–
8
1 MIL (20 pt)
–
1 Fujitsu (24 pt)
CPM2C-8EDM
1 MIL (20 pt)
Relay
1 Terminal block
Transistor output (source type)
1 Fujitsu (24 pt)
CPM2C-16EDM
1 Fujitsu (24 pt)
CPM2C-8ER
CPM2C-8ET1C
1 MIL (20 pt)
Transistor output (source type)
CPM2C-16EDC
CPM2C-8ET1M
–
16
1 MIL (20 pt)
CPM2C-16ET1C
CPM2C-16ET1M
Relay
2 Terminal blocks
6
4
CPM2C-10EDR
Relay
2 Terminal blocks
12
8
CPM2C-20EDR
Transistor output (source type)
2 Fujitsu (24 pt)
16
8
CPM2C-24EDT1C
16
16
2 MIL (20 pt)
Transistor output (source type)
2 Fujitsu (24 pt)
CPM2C-24EDT1M
2 MIL (20 pt)
CPM2C-32EDT1C
CPM2C-32EDT1M
Analogue I/O units
Analogue (resolution 1/6,000)
2 Terminal blocks
2
1
CPM2C-MAD11
Temperature sensor units
Thermocouple input
1 Terminal block
2
–
CPM2C-TS001
Platinum resistance input
1 Terminal block
2
–
CPM2C-TS101
CompoBus/S I/O link unit
–
1 Terminal block
I/O link of 8 input bits and 8 output bits
CPM2C-SRT21
RS-232C and RS422 adapter units
–
1 D-sub 9-pin
RS-232C
CPM2C-CIF01-V1
1 Terminal block and
1 D-sub 9-pin
RS-232C and RS422
CPM2C-CIF11
Note: Expansion I/O units with sourcing transistor outputs are also available with sinking transistor outputs.
MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1).
For I/O Cables and Terminal Blocks, see page 76
17
CP1E CPU units
Compact PLC
Maximum functionality at minimum cost
Omron’s CP1E series targets a “lean” automation solution, but still offers all
functionality you need to control relatively simple applications, including outstanding
positioning capability. The CP1E comes with 10, 14, 20, 30, 40 or 60 I/O built-in and
can be expanded with a wide range of CP1W expansion units up to 180 I/O points.
It uses a standard USB port for programming and monitoring. The CP1E-N CPU
types have a RS232 serial communication port embedded and offer an extra serial
communication port that can be used to connect frequency inverters or temperature
controllers. As the CP1E series shares the same architecture as the CP1L, CP1H, CJ,
and CS1 series, programs are compatible for memory allocations and instructions.
Ordering information
CP1E CPU
Digital Digital Max. I/O
Communication Input/output
input output points (incl. ports
functions
expansions)
E-type with
10 I/O points
6
4
10
–
Output type
5 Encoder inputs
Relay
(10 kHz)
4 Interrupts/counters
Transistor
(sinking)
Power supply Expandability Program Data memory Logic
Order code
capacity capacity
execution
speed
84 to 264 VAC
–
2K steps 2K words
20.4 to
26.4 VDC
8
6
14
E-type with
20 I/O points
12
8
20
E-type with
30 I/O points
18
12
150
E-type with
40 I/O points
24
16
160
N-type with
14 I/O points
8
6
14
N-type with
20 I/O points
NA-type with
20 I/O points
and analogue
I/O
18
12
12
8
8
20
140
6 Encoder inputs
Relay
(10 kHz)
6 Interrupts/counters
CP1E-E10DT-D
CP1E-E10DT1-D
84 to 264 VAC
CP1E-E14SDR-A
CP1E-E20SDR-A
Up to
3 expansion
units*1
RS-232C port
CP1E-E10DR-A
CP1E-E10DR-D
Transistor
(sourcing)
E-type with
14 I/O points
1.19 μs
84 to 264 VAC
–
CP1E-E30SDR-A
CP1E-E40SDR-A
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
CP1E-N14DT-D
Transistor
(sourcing)
CP1E-N14DT1-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
CP1E-N20DT-D
Transistor
(sourcing)
CP1E-N20DT1-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 analogue inputs
(1/6,000)
1 analogue output
(1/6,000)
Relay
84 to 264 VAC Up to
3 expansion
units*1
CP1E-NA20DR-A
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
2 analogue inputs
(1/6,000)
1 analogue output
(1/6,000)
Transistor
(sinking)
20.4 to
26.4 VDC
CP1E-NA20DT-D
20.4 to
26.4 VDC
Transistor
(sourcing)
8K steps 8K words
CP1E-N14DR-A
CP1E-N14DR-D
84 to 264 VAC
CP1E-N20DR-A
20.4 to
26.4 VDC
CP1E-N20DR-D
CP1E-NA20DT1-D
CP1E CPU units
Compact PLC
CP1E CPU
Digital Digital Max. I/O
Communication Input/output
input output points (incl. ports
functions
expansions)
Output type
Power supply Expandability Program Data memory Logic
Order code
capacity capacity
execution
speed
N-type with
30 I/O points
18
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
84 to 264 VAC Up to
3 expansion
20.4 to
units*1
26.4 VDC
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
CP1E-N30DT-D
Transistor
(sourcing)
CP1E-N30DT1-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
84 to 264 VAC
CP1E-N30S1DR-A
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
20.4 to
26.4 VDC
CP1E-N30S1DT-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
CP1E-N40DT-D
Transistor
(sourcing)
CP1E-N40DT1-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
84 to 264 VAC
CP1E-N40S1DR-A
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
20.4 to
26.4 VDC
CP1E-N40S1DT-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
CP1E-N60DT-D
Transistor
(sourcing)
CP1E-N60DT1-D
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
Relay
84 to 264 VAC
CP1E-N60S1DR-A
6 Encoder inputs
(2 × 100 kHz,
4 × 10kHz)
2 Pulse outputs
(100 kHz)
Transistor
(sinking)
20.4 to
26.4 VDC
CP1E-N60S1DT-D
RS-232C port
RS-232C port
RS-485 port
(half-duplex)
N-type with
40 I/O points
24
16
160
RS-232C port
RS-232C port
RS-485 port
(half-duplex)
N-type with
60 I/O points
36
24
180
RS-232C port
RS-232C port
RS-485 port
(half-duplex)
*1
8K steps 8K words
1.19 μs
Transistor
(sourcing)
CP1E-N30DR-A
CP1E-N30DR-D
CP1E-N30S1DT1-D
84 to 264 VAC
CP1E-N40DR-A
20.4 to
26.4 VDC
CP1E-N40DR-D
Transistor
(sourcing)
CP1E-N40S1DT1-D
84 to 264 VAC
CP1E-N60DR-A
20.4 to
26.4 VDC
CP1E-N60DR-D
Transistor
(sourcing)
CP1E-N60S1DT1-D
There is no restriction on the possible combination of CP1W expansion units. All expansion units can be combined with each other up to the maximum number of expansions.
Note: The CP1E E-type has no real-time clock and therefore no battery. The N/NA-type has one optional battery for the real-time clock.
The CP1E-N/NA-type has 6 Interrupts/counters.
The CP1E-NxxS1 CPU types do not support serial option boards.
Accessories
Type
Remarks
Order code
USB programming cable
A-type male to B-type male (length: 1.8 m)
CP1W-CN221
RS-232C option board
D-Sub, 9 pins, female (15 m max.)
CP1W-CIF01
RS-422A/485 option board
Terminal block (50 m max.)
CP1W-CIF11
RS-422A/485 (isolated) option board
Terminal block (500 m max.)
CP1W-CIF12
Ethernet option board
100/10Base-TX (Auto-MDIX)
CP1W-CIF41*1
Battery for CP1E-N/NA type
To retain time of clock
CP1W-BAT01
*1
Only firmware v2.0
19
PLC
150
2
12
CP1L CPU units
Compact PLC
The compact machine controller
When it comes to controllers for compact machines, Omron’s CP1L series offers
the compactness of a micro-PLC with the capability of a modular PLC. It provides all
the functionality you need to control your machine, including outstanding positioning
capability. The CP1L comes with 14, 20, 30, 40, or 60 I/O built-in and can be expanded with a wide range of CP1W expansion units up to 180 I/O points. It uses a standard
USB port for programming and monitoring and offers two optional plug-in serial communication ports, of which one can be used for a display or Ethernet option as well.
As the CP1L series shares the same architecture as the CP1E, CP1H, CJ1, and CS1
series, programs are compatible for memory allocations and instructions.
Ordering information
CP1L CPU
Digital Digital Max. I/O
Input/output functions
input output points (incl.
expansions)
L-type with
10 I/O points
6
4
10
Output type
4 Encoder inputs (100 kHz) Relay
2 Interrupts/counters
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
2 Interrupts/counters
Transistor
(sourcing)
L-type with
14 I/O points
8
6
54
4 Encoder inputs (100 kHz) Relay
4 Interrupts/counters
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
4 Interrupts/counters
Transistor
(sourcing)
L-type with
20 I/O points
12
8
60
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
6 Interrupts/counters
Transistor
(sourcing)
Power supply PLC port Expandability Program Data memory Logic
Order code
capacity capacity
execution
speed
84 to 264 VAC USB
M-type with
30 I/O points
18
12
150
CP1L-L10DR-A
CP1L-L10DR-D
CP1L-L10DT-D
84 to 264 VAC
Up to
1 expansion
units*1
20.4 to
26.4 VDC
CP1L-L14DR-A
CP1L-L14DR-D
CP1L-L14DT-D
CP1L-L14DT1-D
84 to 264 VAC
CP1L-L20DR-A
20.4 to
26.4 VDC
CP1L-L20DR-D
CP1L-L20DT-D
CP1L-L20DT1-D
Ethernet
5K
(+10K FB)
steps
CP1L-EL20DR-D
CP1L-EL20DT-D
Transistor
(sourcing)
CP1L-EL20DT1-D
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
6 Interrupts/counters
Transistor
(sourcing)
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
2 Analogue inputs (1/1,000)
20
0.55 μs
Transistor
(sinking)
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
4 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
6 Interrupts/counters
2 Analogue inputs (1/1,000)
5K steps 10K words
CP1L-L10DT1-D
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
2 Analogue inputs (1/1,000)
4 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
6 Interrupts/counters
2 Analogue inputs (1/1,000)
–
20.4 to
26.4 VDC
84 to 264 VAC USB
20.4 to
26.4 VDC
Up to
3 expansion
units*1
10K steps 32K words
CP1L-M30DR-A
CP1L-M30DR-D
CP1L-M30DT-D
CP1L-M30DT1-D
Ethernet
10K
(+10K FB)
steps
CP1L-EM30DR-D
Transistor
(sinking)
CP1L-EM30DT-D
Transistor
(sourcing)
CP1L-EM30DT1-D
CP1L CPU units
Compact PLC
Digital Digital Max. I/O
Input/output functions
input output points (incl.
expansions)
M-type with
40 I/O points
24
16
160
Output type
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
6 Interrupts/counters
Transistor
(sourcing)
Power supply PLC port Expandability Program Data memory Logic
Order code
capacity capacity
execution
speed
84 to 264 VAC USB
20.4 to
26.4 VDC
M-type with
60 I/O points
36
24
180
0.55 μs
CP1L-M40DR-A
CP1L-M40DR-D
CP1L-M40DT-D
Ethernet
10K
(+10K FB)
steps
CP1L-EM40DR-D
CP1L-EM40DT-D
Transistor
(sourcing)
CP1L-EM40DT1-D
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
2
Transistor
(sinking)
4 Encoder inputs (100 kHz) Transistor
2 Pulse outputs (100 kHz) (sinking)
6 Interrupts/counters
Transistor
(sourcing)
*1
10K steps 32K words
CP1L-M40DT1-D
4 Encoder inputs (100 kHz) Relay
6 Interrupts/counters
2 Analogue inputs (1/1,000)
4 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
6 Interrupts/counters
2 Analogue inputs (1/1,000)
Up to
3 expansion
units*1
PLC
CP1L CPU
84 to 264 VAC USB
10K steps
20.4 to
26.4 VDC
CP1L-M60DR-A
CP1L-M60DR-D
CP1L-M60DT-D
CP1L-M60DT1-D
There is no restriction on the possible combination of CP1W expansion units. All expansion units can be combined with each other up to the maximum number of expansions.
Accessories
Type
Remarks
Order code
Memory cassette
512K words (upload/download program)
CP1W-ME05M
USB programming cable
A-type male to B-type male (length: 1.8 m)
CP1W-CN221
RS-232C option board
D-Sub, 9 pins, female (15 m max.)
CP1W-CIF01
RS-422A/485 option board
Terminal block (50 m max.)
CP1W-CIF11
RS-422A/485 (isolated) option board
Terminal block (500 m max.)
CP1W-CIF12
Ethernet option board
100/10Base-TX (Auto-MDIX)
CP1W-CIF41
LCD display
4 rows × 12 characters
CP1W-DAM01
Analogue I/O option board (only for CP1L-EL/EM)
2 inputs, 0 to 10 V/0 to 20 mA
CP1W-ADB21
Analogue I/O option board (only for CP1L-EL/EM)
2 outputs, 0 to 10 V
CP1W-DAB21V
Analogue I/O option board (only for CP1L-EL/EM)
2 inputs, 0 to 10 V/0 to 20 mA + 2 outputs 0 to 10 V
CP1W-MAB221
Battery
For replacement purpose
CJ1W-BAT01
Note: CP1L-10 I/O points CPU does not support option boards.
CP1L-30/40/60 I/O points CPUs support two option boards.
For Ethernet Cables and Accessories, see page 85.
21
CP1H CPU units
Compact PLC
The all-in-one PLC
Designed for compact machines, it combines the size of a micro PLC and the power
of a modular PLC. Four built-in high-speed counters and four pulse outputs are ideal
for multi-axis positioning control. The CP1H-XA comes with 4 analogue inputs and
2 analogue outputs built-in. This makes it suitable for simple loop control, using the
PLC's advanced PID control function with auto-tuning. The CP1H can be expanded
with CP1W I/Os and supports up to 2 CJ1 special I/O units. This means that it is open
to popular fieldbuses and supports all communication units of the CJ1 series.
•
•
•
•
•
Up to 1 MHz for inputs/outputs
CJ1M compatible instruction set and execution speed
4 analogue inputs and 2 analogue outputs for the XA model
USB port for easy communication, programming and configuration
Supports PROFIBUS, DeviceNet, CAN and Ethernet
Ordering information
CP1H CPU
Digital Digital Max. I/O
Input/output functions
input output points (incl.
expansions)
Output type
Power supply PLC port Expandability Program Data memory Logic
Order code
capacity capacity
execution
speed
Y-type with
20 I/O points
12
8
300
4 Encoder inputs
(2 × 1 MHz +
2 × 100 kHz)
4 Pulse outputs
(2 × 1 MHz +
2 × 100 kHz)
6 Interrupts/counters
Transistor
(sinking)
20.4 to
26.4 VDC
X-type with
40 I/O points
24
16
320
4 Encoder inputs (100 kHz) Relay
8 Interrupts/counters
84 to 264 VAC
CP1H-X40DR-A
4 Encoder inputs (100 kHz) Transistor
4 Pulse outputs (100 kHz) (sinking)
8 Interrupts/counters
Transistor
(sourcing)
20.4 to
26.4 VDC
CP1H-X40DT-D
4 Encoder inputs (100 kHz) Relay
8 Interrupts/counters
4 Analogue inputs (1/12,000)
2 Analogue outputs (1/12,000)
84 to 264 VAC
CP1H-XA40DR-A
4 Encoder inputs (100 kHz) Transistor
4 Pulse outputs (100 kHz) (sinking)
8 Interrupts/counters
Transistor
4 Analogue inputs (1/12,000) (sourcing)
2 Analogue outputs (1/12,000)
20.4 to
26.4 VDC
CP1H-XA40DT-D
XA-type with
40 I/O points
and analogue
I/O
*1
USB
Up to
7 expansion
units*1
20K steps 32K words
0.1 μs
CP1H-Y20DT-D
CP1H-X40DT1-D
CP1H-XA40DT1-D
CP1H CPU series can be expanded with CP1W expansion units (up to 7 units) and CJ1 Special I/O units (up to 2 units).
Note: Some expansion units count for 2 unit numbers (eg. CP1W-AD041, CP1W-DA041, CP1W-TS002 and CP1W-TS102) but only 7 expansion unit numbers can be allocated
in a CP1H PLC's configuration.
Accessories
Type
Remarks
Order code
Memory cassette
512K words (upload/download program)
CP1W-ME05M
USB programming cable
A-type male to B-type male (length: 1.8 m)
CP1W-CN221
RS-232C option board
D-Sub, 9 pins, female (15 m max.)
CP1W-CIF01
RS-422A/485 option board
Terminal block (50 m max.)
CP1W-CIF11
RS-422A/485 (isolated) option board
Terminal block (500 m max.)
CP1W-CIF12
Ethernet option board
100/10Base-TX (Auto-MDIX)
CP1W-CIF41
LCD display
4 rows × 12 characters
CP1W-DAM01
Expansion I/O connecting cable
80 cm cable to connect CP1W expansion units
CP1W-CN811
CJ1 expansion unit adapter
Unit to connect CJ1 Special I/O units
CP1W-EXT01
Battery
For replacement purpose
CJ1W-BAT01
22
CP1W expansion units
Compact PLC
Expand the capacity of your compact PLC
2
PLC
A wide variety of expansion units such as Digital I/O, Analogue I/O and Remote I/O
are available to create the application you need. These CP1W expansion units can be
used for CP1E-, CP1L-, and CP1H series PLC.
Ordering information
Expansion unit
Inputs
Outputs
Max I/O points
Input/output functions
Input/output type
Size in mm
(H × W × D)
No. of unit
Order code
numbers
allocated
(CP1H only)*1
Digital I/O units
8
–
8 points
8 Inputs
–
90 × 66 × 50
1
CP1W-8ED
–
8
8 Outputs
Relay
90 × 66 × 50
1
CP1W-8ER
Transistor (sinking) 90 × 66 × 50
1
CP1W-8ET
Transistor (sourcing) 90 × 66 × 50
1
CP1W-8ET1
12
24
Analogue I/O units
16
16 points
16 Outputs
Relay
90 × 86 × 50
1
CP1W-16ER
8
20 points
12 Inputs/8 outputs
Relay
90 × 86 × 50
1
CP1W-20EDR1
Transistor (sinking) 90 × 86 × 50
1
CP1W-20EDT
Transistor (sourcing) 90 × 86 × 50
1
CP1W-20EDT1
16
40 points
24 Inputs/16 outputs
Relay
90 × 150 × 50 1
CP1W-40EDR
Transistor (sinking) 90 × 150 × 50 1
CP1W-40EDT
Transistor (sourcing) 90 × 150 × 50 1
CP1W-40EDT1
4
–
4 analogue points 4 Analogue inputs (resolution 1/6,000)
Analogue
90 × 86 × 50
2
CP1W-AD041
–
4
4 analogue points 4 Analogue outputs (resolution 1/6,000)
Analogue
90 × 86 × 50
2
CP1W-DA041
–
2
2 analogue points 2 Analogue outputs (resolution 1/6,000)
Analogue
90 × 86 × 50
1
CP1W-DA021
2
1
3 analogue points 2 Analogue inputs (resolution 1/6,000)
1 Analogue output (resolution 1/6,000)
Analogue
90 × 86 × 50
1
CP1W-MAD11
Temperature sensor units
(K, J)
2
–
2 analogue points 2 Thermocouple inputs (K or J)
–
90 × 86 × 50
1
CP1W-TS001
4
–
4 analogue points 4 Thermocouple inputs (K or J)
–
90 × 86 × 50
2
CP1W-TS002
Temperature sensor units
(Pt100, JPt100)
2
–
2 analogue points 2 Platinum resistance thermometer inputs –
(Pt100 or JPt100)
90 × 86 × 50
1
CP1W-TS101
4
–
4 analogue points 4 Platinum resistance thermometer inputs –
(Pt100 or JPt100)
90 × 86 × 50
2
CP1W-TS102
CompoBus/S I/O link unit
8 points
8 points
16 points
I/O link of 8 input bits and 8 output bits
CompoBus/S
communication
90 × 66 × 50
1
CP1W-SRT21
PROFIBUS-DP I/O link unit
16 points
16 points
32 points
I/O link of 16 input bits and 16 output bits
PROFIBUS-DP
communication
90 × 66 × 50
1
CPM1A-PRT21
DeviceNet I/O link unit
32 points
32 points
64 points
I/O link of 32 input bits and 32 output bits
DeviceNet
communication
90 × 66 × 50
1
CPM1A-DRT21
*1
Some expansion units count for 2 unit numbers (eg. CP1W-AD041, CP1W-DA041, CP1W-TS002 and CP1W-TS102) but only 7 expansion unit numbers can be allocated in a CP1H PLC's configuration.
23
CJ-Series CPU units
Modular PLC
Fast and powerful CPUs for any task
The family of CJ1 and CJ2 CPUs range from very small CPUs for simple sequence
control to powerful and fast models that offer total machine control which can handle
up to 2,560 I/O points. This enables you to modularize or ’slice’ your machine into
logical sections without changing PLC series.
All CPU units support IEC61131-3 Structured text, Sequential Function Charts and
ladder language. Omron's extensive function block library helps to reduce your
programming effort, while you can create your own function blocks to suit your
specific needs.
All CJ2M CPU units can be equipped with pulse I/O option modules to perform
position control for up to 4 axes, using dedicated instructions.
Ordering information
Max. digital
I/O points
Data memory Logic execution
capacity
speed
Max. I/O units Width
5 V current
Built-in functions
consumption
Order code
2,560
400 K
832 K
16 ns
40
80 mm
820 mA
USB + EtherNet/IP + RS-232C
CJ2H-CPU68-EIP
2,560
250 K
512 K
16 ns
40
80 mm
820 mA
USB + EtherNet/IP + RS-232C
CJ2H-CPU67-EIP
2,560
150 K
352 K
16 ns
40
80 mm
820 mA
USB + EtherNet/IP + RS-232C
CJ2H-CPU66-EIP
2,560
100 K
160 K
16 ns
40
80 mm
820 mA
USB + EtherNet/IP + RS-232C
CJ2H-CPU65-EIP
2,560
50 K
160 K
16 ns
40
80 mm
820 mA
USB + EtherNet/IP + RS-232C
CJ2H-CPU64-EIP
2,560
60 K
160 K
40 ns
40
62 mm
700 mA
USB + EtherNet/IP, serial comm. option slot
CJ2M-CPU35
2,560
30 K
160 K
40 ns
40
62 mm
700 mA
USB + EtherNet/IP, serial comm. option slot
CJ2M-CPU34
2,560
20 K
64 K
40 ns
40
62 mm
700 mA
USB + EtherNet/IP, serial comm. option slot
CJ2M-CPU33
2,560
10 K
64 K
40 ns
40
62 mm
700 mA
USB + EtherNet/IP, serial comm. option slot
CJ2M-CPU32
2,560
5K
64 K
40 ns
40
62 mm
700 mA
USB + EtherNet/IP, serial comm. option slot
CJ2M-CPU31
2,560
400 K
832 K
16 ns
40
49 mm
420 mA
USB + RS-232C
CJ2H-CPU68
2,560
250 K
512 K
16 ns
40
49 mm
420 mA
USB + RS-232C
CJ2H-CPU67
2,560
150 K
352 K
16 ns
40
49 mm
420 mA
USB + RS-232C
CJ2H-CPU66
2,560
100 K
160 K
16 ns
40
49 mm
420 mA
USB + RS-232C
CJ2H-CPU65
2,560
50 K
160 K
16 ns
40
49 mm
420 mA
USB + RS-232C
CJ2H-CPU64
2,560
60 K
160 K
40 ns
40
31 mm
500 mA
USB + RS-232C
CJ2M-CPU15
2,560
30 K
160 K
40 ns
40
31 mm
500 mA
USB + RS-232C
CJ2M-CPU14
2,560
20 K
64 K
40 ns
40
31 mm
500 mA
USB + RS-232C
CJ2M-CPU13
2,560
10 K
64 K
40 ns
40
31 mm
500 mA
USB + RS-232C
CJ2M-CPU12
2,560
5K
64 K
40 ns
40
31 mm
500 mA
USB + RS-232C
CJ2M-CPU11
1,280
60 k
128 k
40 ns
40
69 mm
1,060 mA
Loop control engine (300 blocks) with Gradient
Temperature Control
CJ1G-CPU45P-GTC
1,280
60 k
128 k
40 ns
40
69 mm
1,060 mA
Loop control engine (300 blocks)
CJ1G-CPU45P
1,280
30 k
64 k
40 ns
40
69 mm
1,060 mA
Loop control engine (300 blocks)
CJ1G-CPU44P
960
20 k
64 k
40 ns
30
69 mm
1,060 mA
Loop control engine (300 blocks)
CJ1G-CPU43P
960
10 k
64 k
40 ns
30
69 mm
1,060 mA
Loop control engine (50 blocks)
CJ1G-CPU42P
640
20 k
32 k
100 ns
20
49 mm
640 mA
2 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
4 interrupt/counter inputs
CJ1M-CPU23
320
10 k
32 k
100 ns
10
49 mm
640 mA
2 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
4 interrupt/counter inputs
CJ1M-CPU22
160
5k
32 k
100 ns
10
49 mm
640 mA
2 Encoder inputs (100 kHz)
2 Pulse outputs (100 kHz)
4 interrupt/counter inputs
CJ1M-CPU21
640
20 k
32 k
100 ns
19
62 mm
950 mA
100 base-Tx Ethernet port
CJ1M-CPU13-ETN
20
31 mm
580 mA
–
CJ1M-CPU13
9
62 mm
950 mA
100 base-Tx Ethernet port
CJ1M-CPU12-ETN
10
31 mm
580 mA
–
CJ1M-CPU12
9
62 mm
950 mA
100 base-Tx Ethernet port
CJ1M-CPU11-ETN
10
31 mm
580 mA
–
CJ1M-CPU11
320
160
24
Program
capacity
10 k
5k
32 k
32 k
100 ns
100 ns
CJ-Series CPU units
Modular PLC
Remarks
Order code
High-speed data collection and storage unit, with CF card slot and Ethernet port
CPU bus unit
CJ1W-SPU01-V2
Pulse I/O option module for CJ2M CPU Units, 2 encoder inputs, 2 pulse outputs
NPN (sinking) outputs
CJ2M-MD211
Pulse I/O option module for CJ2M CPU Units, 2 encoder inputs, 2 pulse outputs
PNP (sourcing) outputs
CJ2M-MD212
CompactFlash memory card, 128 MB, for all models (not required for operation)
Industrial grade
HMC-EF183
CompactFlash memory card, 256 MB, for all models (not required for operation)
Industrial grade
HMC-EF283
CompactFlash memory card, 512 MB, for all models (not required for operation)
Industrial grade
HMC-EF583
CompactFlash PC-Card adapter
–
HMC-AP001
I/O terminal block (40-pt.) for CJ1M-CPU2_/CJ2M-MD21_
Push-in
XW2R-P40G-T
I/O terminal block (40-pt.) for CJ1M-CPU2_/CJ2M-MD21_
Clamp
XW2R-E40G-T
I/O terminal block (40-pt.) for CJ1M-CPU2_/CJ2M-MD21_
M3 Screws
XW2R-J40G-T
Connection cable between I/O terminal block and CJ1M-CPU2_/CJ2M-MD21_ ( _ _ _ _ = length in cm)
MIL (40 pt)
XW2Z-____FF-L
Servo unit terminal block for 1 axis
–
XW2B-20J6-8A
Servo unit terminal block for 2 axes
–
XW2B-40J6-9A
SMARTSTEP cable for CJ1M-CPU2_/CJ2M-MD21_, cable length: 1 m
–
XW2Z-100J-A26
W-series servo cable for CJ1M-CPU2_/CJ2M-MD21_, cable length: 1 m
–
XW2Z-100J-A27
CX-One, integrated software for programming and configuration of all Omron control system components
–
CX-ONE-AL_ _ C-E
Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port (length: 2.0 m)
–
CS1W-CN226
Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port (length: 6.0 m)
–
CS1W-CN626
USB to serial conversion cable
–
CS1W-CIF31
RS-232C Option Board*1
–
CP1W-CIF01
RS-422A/485 Option board*1
–
CP1W-CIF11
RS422A/485 (isolated) Option board*1
–
CP1W-CIF12
Battery Set*2
–
CJ1W-BAT01
USB Programming cable
–
CP1W-CN221
*1
*2
2
Description
PLC
Accessories
Only used with CJ2M-CPU3_
Included with the CPU unit
Note: - MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1).
- More accessories are available. Please refer to CJ-Series Data Sheets and Operation Manuals for details
For I/O Cables and Terminal Blocks, see page 76
For Ethernet Cables and Accessories, see page 85
25
CJ-Series power supplies, expansions
Modular PLC
Power and flexibility
CJ systems can operate on 24 VDC power supply, or on 100 to 240 VAC mains.
For small-scale systems with mainly digital I/O a low cost, small capacity power
supply can be used. For systems with many analogue I/Os and control/communication units, it may be necessary to use a larger power supply unit.
Depending on the CPU type, up to 3 expansions can be connected to the CPU 'rack',
giving a total capacity of 40 I/O units. The total length of the expansion cables of one
system may be up to 12 m.
Ordering information
Power supply
Input range
Power
consumption
Output capacity at
5 VDC
Output capacity at
24 VDC
Max. output
power
Features
Width
Order code
21.6 to 26.4 VDC
35 W max.
2.0 A
0.4 A
16.6 W
–
27 mm
CJ1W-PD022
19.2 to 28.8 VDC
50 W max.
5.0 A
0.8 A
25 W
–
60 mm
CJ1W-PD025
85 to 264 VAC
47 to 63 Hz
50 VA max.
2.8 A
0.4 A
14 W
–
45 mm
CJ1W-PA202
100 VA max.
5.0 A
0.8 A
25 W
Run output (SPST relay)
80 mm
CJ1W-PA205R
Maintenance status display
80 mm
CJ1W-PA205C
Width,
Length
Order code
Note: The CJ1W-PD022 has no galvanic isolation
I/O expansion
Type
Description
I/O control unit
Required unit on CPU 'rack' to connect I/O expansions
20 mm
CJ1W-IC101
I/O interface unit
Start unit for each I/O expansion 'rack'. Requires a power supply unit.
31 mm
CJ1W-II101
I/O expansion cable
Connects CJ1W-IC101 or -II101 to the next expansion rack's -II101
0.3 m
CS1W-CN313
0.7 m
CS1W-CN713
2.0 m
CS1W-CN223
3.0 m
CS1W-CN323
5.0 m
CS1W-CN523
10 m
CS1W-CN133
12 m
CS1W-CN133-B2
26
CJ-Series digital I/O units
Modular PLC
8 to 64 points per unit –
input, output or mixed
2
CJ1 units are available with various I/O densities and connection technologies. Up to
16 I/O points can be wired to units with detachable M3 screw terminals or screwless
clamp terminals. High-density 32- and 64- point I/O units are equipped with standard
40-pin flat cable-connectors. Prefabricated cables and wiring terminals are available
for easy interfacing to high-density I/O units.
PLC
Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence
control. A full range of units, from high-speed DC inputs to relay outputs, let you adapt
CJ1 to your needs.
Ordering information
Points
Type
Width
Remarks
Connection type*1
Order code
16
AC input
120 VAC
7 mA
31 mm
–
M3
CJ1W-IA111
8
AC input
240 VAC
10 mA
31 mm
–
M3
CJ1W-IA201
8
DC input
24 VDC
10 mA
31 mm
–
M3
CJ1W-ID201
16
DC input
24 VDC
7 mA
31 mm
–
M3
Screwless
CJ1W-ID211
CJ1W-ID211(SL)
16
DC input
24 VDC
7 mA
31 mm
Fast-response (15 μs ON, 90 μs OFF)
M3
CJ1W-ID212
16
DC input
24 VDC
7 mA
31 mm
Inputs start interrupt tasks in PLC program M3
CJ1W-INT01
16
DC input
24 VDC
7 mA
31 mm
Latches pulses down to 50 μs pulse width M3
CJ1W-IDP01
32
DC input
24 VDC
4.1 mA
20 mm
–
1 × Fujitsu
CJ1W-ID231
32
DC input
24 VDC
4.1 mA
20 mm
–
1 × MIL*1 (40 pt)
CJ1W-ID232
32
DC input
24 VDC
4.1 mA
20 mm
Fast-response (15 μs ON, 90 μs OFF)
1 × MIL*1 (40 pt)
CJ1W-ID233
64
DC input
24 VDC
4.1 mA
31 mm
–
2 × Fujitsu
CJ1W-ID261
64
DC input
24 VDC
4.1 mA
31 mm
–
2 × MIL*1 (40 pt)
CJ1W-ID262
0.6 mA
31 mm
–
M3
CJ1W-OA201
Rated voltage
Rated current
8
Triac output
250 VAC
8
Relay output
250 VAC
2
A
31 mm
–
M3
Screwless
CJ1W-OC201
CJ1W-OC201(SL)
16
Relay output
250 VAC
2
A
31 mm
–
M3
Screwless
CJ1W-OC211
CJ1W-OC211(SL)
8
DC output (sink)
12 to 24 VDC
2
A
31 mm
–
M3
CJ1W-OD201
8
DC output (source)
24 VDC
2
A
31 mm
With short-circuit protection, alarm
M3
CJ1W-OD202
8
DC output (source)
24 VDC
0.5
A
31 mm
With short-circuit protection, alarm
M3
CJ1W-OD204
12 to 24 VDC
0.5
A
31 mm
–
M3
Screwless
CJ1W-OD211
CJ1W-OD211 (SL)
24 VDC
0.5
A
31 mm
With short-circuit protection, alarm
M3
Screwless
CJ1W-OD212
CJ1W-OD212 (SL)
16
DC output (sink)
16
DC output (source)
16
DC output (sink)
24 VDC
0.5
A
31 mm
Fast-response (15 μs ON, 80 μs OFF)
M3
CJ1W-OD213
32
DC output (sink)
12 to 24 VDC
0.5
A
20 mm
–
1 × Fujitsu
CJ1W-OD231
32
DC output (source)
24 VDC
0.3
A
20 mm
With short-circuit protection, alarm
1 × MIL*1 (40 pt)
CJ1W-OD232
32
DC output (sink)
24 VDC
0.5
A
20 mm
Fast-response (15 μs ON, 80 μs OFF)
1 × MIL*1 (40 pt)
CJ1W-OD234
64
DC output (sink)
12 to 24 VDC
0.3
A
31 mm
–
2 × Fujitsu
CJ1W-OD261
64
DC output (source)
24 VDC
0.3
A
31 mm
–
2 × MIL*1 (40 pt)
CJ1W-OD262
16 +16
DC in+out (source)
24 VDC
0.5
A
31 mm
–
2 × MIL*1 (20 pt)
CJ1W-MD232
32 +32
DC in+out (sink)
24 VDC
0.3
A
31 mm
–
2 × MIL*1 (40 pt)
CJ1W-MD263
32 +32
DC in+out (TLL)
5 VDC
35 mA
31 mm
–
2 × MIL*1 (40 pt)
CJ1W-MD563
Description
Connection type
Order code
Replacement 18-point screwless terminal blocks for I/O units, pack of 5 pcs.
Screwless
CJ-WM01-18P-5
Replacement 18-point screw terminal blocks for I/O units, pack of 5 pcs.
M3
CJ-OD507-18P-5
*1
MIL = connector according to MIL-C-83503 (compatible with DIN 41651/IEC 60603-1).
Note: All digital I/O units are designated as basic I/O units.
For I/O Cables and Terminal Blocks, see page 76
Accessories
27
CJ-Series analogue I/O and control units
Modular PLC
From basic analogue I/O to advanced
temperature control
The CJ-series offers a wide choice of analogue input units, fit for any application,
from low-speed, multi-channel temperature measurement to high-speed, high-accuracy data acquisition. Analogue outputs can be used for accurate control or external
indication.
Advanced units with built-in scaling, filtering and alarm functions reduce the need for
complex PLC programming. High-accuracy process I/O units support an extensive
range of sensors, for fast and accurate data acquisition. Temperature control units
relieve the PLC CPU of PID calculations and alarm monitoring. These functions are
handled autonomously by the unit, offering control performance and auto-tuning
functions similar to stand-alone temperature controllers.
Ordering information
Accuracy*1
Points Type
Ranges
Resolution
4
0 to
5V
1 to
5V
0 to 10 V
0 to 20 mA
4 to 20 mA
K, J, T, L, R, S, B
Pt100, Pt1000,
JPt100
V / I: 1/12,000 V: 0.3%
T/C: 0.1 °C
I: 0.3%
RTD: 0.1 °C T/C: 0.3%
RTD: 0.3%
4
Universal analogue
input
Analogue input
0
0
-10
1
4
to
to
to
to
to
5 V,
10 V,
10 V,
5 V,
20 mA
1/8,000
1/40,000
V:
I:
0.2%
0.4%
V:
I:
0.2%
0.4%
Conversion
time
Width
Remarks
250 ms/4 point 31 mm Universal inputs, with zero/span adjustment, M3
configurable alarms, scaling, sensor error Screwless
detection
250 μs/point
31 mm Offset/gain adjustment, peak hold,
moving average, alarms
4
High-speed
analogue input
1
0
-5
-10
4
to
to
to
to
to
5 V,
10 V,
5 V,
10 V,
20 mA
8
Analogue input
1
0
0
-10
to
to
to
to
4
5 V,
1/8,000
5 V,
10 V,
10 V,
to 20mA
V:
I:
0.2%
0.4%
0
0
-10
1
4
to
to
to
to
to
5 V,
10 V,
10 V,
5 V,
20 mA
1/4,000
V:
I:
0.3%
0.5%
1 ms/point 31 mm Offset/gain adjustment, output hold
1
0
0
-10
4
to
to
to
to
to
5 V,
5 V,
10 V,
10 V,
20 mA
1/4,000
V:
I:
0.3%
0.5%
1 ms/point 31 mm Offset/gain adjustment, output hold
2
4
Analogue output
Analogue output
4
High-speed
analogue output
1 to
0 to
-10 to
5 V,
10 V,
10 V
1/40,000
0.3%
8
Voltage output
0
0
-10
1
5 V,
10 V,
10 V,
5V
1/8,000
0.3%
20 mA
1/8,000
8
4+2
Current output
Analogue in + output
to
to
to
to
4 to
1
0
0
-10
4
to
to
to
to
to
5 V,
5 V,
10 V,
10 V,
20 mA
1/8,000
0.3%
in: 0.2%
out: 0.3%
4
Universal analogue DC voltage,
input
DC current,
Thermocouple,
Pt100/Pt1000,
potentiometer
1/256,000
0.05%
2
Process input
1/64,000
0.05%
28
4
0
0
-10
0
-5
1
0
1.25
to 20 mA
to 20 mA
to 10 V,
to 10 V,
to
5 V,
to
5 V,
to
5 V,
to 1.25 V,
to 1.25 V
Connection
type
31 mm Offset/gain adjustment, peak hold,
moving average, alarms
250 μs/point
31 mm Offset/gain adjustment, output hold
31 mm Offset/gain adjustment, output hold
CJ1W-AD041-V1
CJ1W-AD041-V1 (SL)
CJ1W-AD042
M3
CJ1W-AD081-V1
Screwless
CJ1W-AD081-V1 (SL)
M3
CJ1W-DA021
Screwless
CJ1W-DA021 (SL)
M3
CJ1W-DA041
Screwless
CJ1W-DA041 (SL)
CJ1W-DA042V
M3
CJ1W-DA08V
Screwless
CJ1W-DA08V (SL)
M3
CJ1W-DA08C
Screwless
CJ1W-DA08C (SL)
1 ms/point 31 mm Offset/gain adjustment, scaling, peak hold, M3
moving average, alarms, output hold
Screwless
60 ms/4 points 31 mm All inputs individually isolated, configurable M3
alarms, maintenance functions,
user-defined scaling, zero/span adjustment
5 ms/point 31 mm Configurable alarms, maintenance
functions, user-defined scaling, zero/span
adjustment, square root, totaliser
CJ1W-AD04U(SL)
Screwless
35 μs/4 points 31 mm Direct conversion (CJ2H special instruction) M3
250 μs/point
CJ1W-AD04U
M3
35 μs/4 points 31 mm Direct conversion (CJ2H special instruction) M3
250 μs/point
Order code
M3
CJ1W-MAD42
CJ1W-MAD42 (SL)
CJ1W-PH41U
CJ1W-PDC15
CJ-Series analogue I/O and control units
Ranges
2
Thermocouple
input
B, E, J, K, L, N, R, S, 1/64,000
T, U,
WRe5-26, PLII,
-100 to 100 mV
4
Thermocouple
Input
B, J, K, L,
R, S, T
0.1°C
0.3%
62.5 ms/point 31 mm 4 configurable alarm outputs
M3
CJ1W-PTS51
4
Resistance thermometer input
Pt100, JPt100
0.1°C
0.3%
62.5 ms/point 31 mm 4 configurable alarm outputs
M3
CJ1W-PTS52
6
Thermocouple
input
K-type
(-200 to
1,300°C)
J-Type
(-100 to 850°C)
0.1°C
0.5%
40 ms/point 31 mm Basic I/O unit, setup by DIP switches,
adjustable filtering 10/50/60 Hz
M3
CJ1W-TS561
Screwless
CJ1W-TS561 (SL)
Resistance thermometer input
Pt100
(-200 to 650°C)
Pt1000
(-200 to 650°C)
0.1°C
40 ms/point 31 mm Basic I/O unit, setup by DIP switches,
adjustable filtering 10/50/60 Hz
M3
CJ1W-TS562
Screwless
CJ1W-TS562 (SL)
Width
Remarks
Connection
type
5 ms/point 31 mm Configurable alarms, maintenance functions M3
Order code
CJ1W-PTS15
2
0.05%
Conversion
time
0.5%
4
Temperature con- B, J, K, L,
trol loops, Thermo- R, S, T
couple
0.1°C
0.3%
500 ms total
31 mm 4 control outputs: PNP open
collector, 100 mA max.
M3
CJ1W-TC002
2
Temperature con- B, J, K, L,
trol loops, Thermo- R, S, T
couple
0.1°C
0.3%
500 ms total
31 mm 2 control outputs: PNP open
M3
collector, 100 mA max., 2 current transformer inputs for heater burnout detection.
CJ1W-TC004
4
Temperature con- Pt100, JPt100
trol loops, RTD
0.1°C
0.3%
500 ms total
31 mm 4 control outputs: PNP open
collector, 100 mA max.
M3
CJ1W-TC102
2
Temperature con- Pt100, JPt100
trol loops, RTD
0.1°C
0.3%
500 ms total
31 mm 2 control outputs: PNP open
M3
collector, 100 mA max., 2 current transformer inputs for heater burnout detection.
CJ1W-TC104
1
Load Cell Interface 10 VDC or 2.5 VDC, 24 bit, 0.1μV/ Linearity error: 0.33 ms
unit
max. four 350 load count
<0.02% FS
cells.
31 mm Self-contained unit designed for fast weight M3
and force measurement.
Low-pass filter adjustable 3 Hz - 1 kHz.
Made by Unipulse Co.
CJ1W-F130
1
Weighing unit
31 mm Self-contained unit designed for feed weigh- M3
ing, discharge weighing, hopper scales,
packing scales, bag filling, etc. Made by
Unipulse Co.
CJ1W-F159
*1
10 VDC, max. four
350 load cells
PLC
Accuracy*1
Points Type
6
Resolution
Modular PLC
24 bit, 0.3μV/ Linearity error: 2 ms
count
<0.01% FS
Accuracy for Voltage and Current Inputs/Outputs as percentage of full scale and typical value at 25°C ambient temperature (Consult the operation manual for details)
Accuracy for Temperature Inputs/Outputs as percentage of process value and typical value at 25°C ambient temperature (Consult the operation manual for details)
Note: All Analogue I/O units are designated as Special I/O units, except TS561/TS562, which are Basic I/O units (cannot be used with CP1H).
Accessories
Description
Connection
type
Order code
Replacement 18-point screwless terminal blocks for I/O units, pack of 5 pcs.
Screwless
CJ-WM01-18P-5
Replacement 18-point screw terminal blocks for I/O units, pack of 5 pcs.
M3
CJ-OD507-18P-5
29
CJ-Series motion/position control units
Modular PLC
Add motion control to any CJ-Series PLC
From simple position measurement to multi-axis synchronised motion control, the
CJ-Series offers a full range of units:
• Counter units gather position information from SSI- or incremental encoders.
Actual positions are compared with internally stored target values.
• CJ2M CPU Units have dedicated positioning functions that can be used by
installing up to 2 Pulse I/O option modules.
• Position Control units are used for point-to-point positioning with servo drives or
stepper motors. Target data and acceleration/deceleration curves can be adjusted
on-the-fly.
• Position- and Motion Control units equipped with EtherCAT or MECHATROLINK-II
interface can control multiple drives through a single high-speed link. Message
routing through multiple communication layers allows the attached drives to be
configured from any point in the control network.
Ordering information
Channels/ Type
Axes
Signal type
Unit class
Width
Remarks
Connection type
Order code
2
SSI inputs (absolute
position data)
Synchronous
serial protocol
Special I/O unit
31mm
Baud rate, encoding type, data length,
etc. can be set per channel
M3 screw
CJ1W-CTS21-E
2
500 kHz Counter
24 V, line driver
Special I/O unit
31mm
2 configurable digital inputs + outputs
1 × Fujitsu (40 pt)
CJ1W-CT021
4
100 kHz Counter
Line driver, 24 V via
terminal block
Special I/O unit
31mm
Target values trigger interrupt to CPU
1 × MIL (40 pt)
CJ1W-CTL41-E
1
DC Motor Control unit
PWM (24 V/4 A)
Special I/O unit
31mm
4 configurable digital inputs + 50 kHz counter input 3 × Screwless
CJ1W-DCM11-E
2
Pulse I/O option module for 24 V, line driver
CJ2M CPU
CPU Option Module 20mm
100 kpps encoder inputs and pulse outputs,
NPN (sinking), interrupt / fast response inputs
1 × MIL (40 pt)
CJ2M-MD211
2
Pulse I/O option module for 24 V, line driver
CJ2M CPU
CPU Option Module 20mm
100 kpps encoder inputs and pulse outputs,
PNP (sourcing), interrupt / fast response inputs
1 × MIL (40 pt)
CJ2M-MD212
1
Position Control unit
24 V open collector
Special I/O unit
31mm
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CJ1W-NC113
2
Position Control unit
24 V open collector
Special I/O unit
31mm
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CJ1W-NC213
4
Position Control unit
24 V open collector
Special I/O unit
31mm
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
2 × Fujitsu (40 pt)
CJ1W-NC413
2
Position Control Unit High 24 V open collector
speed type
Special I/O Unit
51mm
500 kpps pulse outputs, built-in feedback pulse
counters, synchronous multi-axis control
MIL
CJ1W-NC214
4
Position Control Unit High 24 V open collector
speed type
Special I/O Unit
62mm
500 kpps pulse outputs, built-in feedback pulse
counters, synchronous multi-axis control
MIL
CJ1W-NC414
2
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
RJ45
CJ1W-NC281
4
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
RJ45
CJ1W-NC481
4
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
RJ45
access to all drive parameters,
supports up to 64 general purpose EtherCAT slaves
CJ1W-NC482
8
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
RJ45
CJ1W-NC881
8
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
RJ45
access to all drive parameters,
supports up to 64 general purpose EtherCAT slaves
CJ1W-NC882
16
Position Control Unit
EtherCAT
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
RJ45
CJ1W-NCF81
2
Position Control Unit
MECHATROLINK-II
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
ML-II
CJ1W-NC271
4
Position Control Unit
MECHATROLINK-II
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
ML-II
CJ1W-NC471
16
Position Control unit
MECHATROLINK-II
CPU bus unit
31mm
Position, speed and torque control,
access to all drive parameters
ML-II
CJ1W-NCF71
30
Advanced Motion Control MECHATROLINK-II,
unit
Encoder I/O, digital I/O
CPU bus unit
49mm
Trajexia Motion Controller on the CJ-series
ML-II, 9-pin D-Sub,
screwless push-in
CJ1W-MCH72
Note: Line driver signal type units also available.
30
CJ-Series motion/position control units
Modular PLC
Accessories
Connection type
Order code
Screwless terminal block for connecting 24 V or Line driver encoders to CJ1W-CTL41-E
Push-in
XW2G-40G7-E
General purpose I/O connection cable for I/O units with 40-pt. Fujitsu connector ( _ _ _ _ = length in cm)
Fujitsu (40 pt.) to
MIL (40 pt.)
XW2Z-_ _ _ _ BF-L
General purpose I/O connection cable for I/O units with 40-pt. MIL connector ( _ _ _ _ = length in cm)
2 × MIL (40 pt)
XW2Z-_ _ _ _ FF-L
Servo relay unit 1-Axis position control unit
–
XW2B-20J6-1B
Servo relay unit 2-Axes position control unit
–
XW2B-40J6-2B
Cable connecting servo relay unit to Position control unit CJ1W-NC113, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A14
Cable connecting servo relay unit to Position control unit CJ1W-NC213/413, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A15
Cable connecting servo relay unit to Position control unit CJ1W-NC113, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A14
Cable connecting servo relay unit to Position control unit CJ1W-NC213/413, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A15
Cable connecting servo relay unit to Position control unit CJ1W-NC133, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A18
Cable connecting servo relay unit to Position control unit CJ1W-NC233/433, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A19
Cable connecting servo relay unit to Position control unit CJ1W-NC133, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A18
Cable connecting servo relay unit to Position control unit CJ1W-NC233/433, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A19
Cable connecting servo relay unit to Accurax G5 servo drives, cable length 1 m.
–
XW2Z-100J-B25
Cable connecting servo relay unit to SmartStep 2 servo drive, cable length 1 m.
–
XW2Z-100J-B29
2
PLC
Description
Note: For General-purpose I/O Cables and Terminal Blocks, see page 76
31
CJ-Series communication units
Modular PLC
Open to any communication
The CJ-Series offers both standardised open networks interfaces, and cost-efficient
high-speed proprietary network links. Datalinks between PLCs, or to higher-level
information systems can be made using serial or Ethernet links, or the easy-to-use
controller link network.
Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP.
For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of
installation. Fully user-configurable serial and CAN-based communication can be
used to emulate a variety of application-specific protocols. EtherNet/IP units provide
data link functions to share large amounts of data between PLCs. The new PROFINETIO controller together with the SmartSlice modular I/O system offers Ethernet based
I/O with controller- and network redundancy.
Ordering information
Type
Ports
Serial
2 × RS-232C
Serial
2 × RS-232C
Serial
Data transfer Protocols
Unit class
Width
Connection type
Order code
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU21-V1
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU22
2 × RS-422A/RS-485
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU31-V1
Serial
2 × RS-422A/RS-485 High-speed
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU32
Serial
1 × RS-232C +
1 × RS-422/RS-485
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU41-V1
Serial
1 × RS-232C +
1 × RS-422/RS-485
CompoWay/F, Host link, NT link, Modbus, User-defined
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-SCU42
Ethernet
1 × 100 Base-Tx
UDP, TCP/IP, FTP server,SMTP (e-mail), SNTP (time adjust), CPU bus unit
FINS routing, socket service
31 mm
RJ45
CJ1W-ETN21
EtherNet/IP
1 × 100 Base-Tx
High-speed
High-speed
EtherNet/IP, UDP, TCP/IP, FTP server, SNTP, SNMP
CPU Bus unit
31 mm
RJ45
CJ1W-EIP21
Controller link 2-wire twisted pair
Omron proprietary
CPU bus unit
31 mm
2-wire screw + GND
CJ1W-CLK23
DeviceNet
DeviceNet
CPU bus unit
31 mm
5-p detachable
CJ1W-DRM21
PROFIBUS-DP 1 × RS-485 (Master)
DP, DPV1
CPU bus unit
31 mm
9-pin D-Sub
CJ1W-PRM21
PROFIBUS-DP 1 × RS-485 (Slave)
DP
Special I/O unit
31 mm
9-pin D-Sub
CJ1W-PRT21
PROFINET-IO 1 × 100 Base-Tx
PROFINET-IO Controller, FINS/UDP
CPU Bus unit
31 mm
RJ45
CJ1W-PNT21
CAN
1 × CAN
User-defined, supports 11-bit and 29-bit identifiers
CPU bus unit
31 mm
5-p detachable
CJ1W-CORT21
CompoNet
4-wire, data +
power to slaves
(Master)
CompoNet (CIP-based)
Special I/O unit
31 mm
4-p detachable IDC or screw
CJ1W-CRM21
Omron proprietary
Special I/O unit
20 mm
2-wire screw + 2-wire power CJ1W-SRM21
1 × CAN
CompoBus/S 2-wire (Master)
Accessories
Description
Connection type
Order code
RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port.
9-pin D-sub to screw clamp terminals
CJ1W-CIF11
Controller link PCI board with support software
PCI, wired CLK
3G8F7-CLK23-E
Controller link repeater unit (wire to wire)
Screw - Screw
CS1W-RPT01
Controller link repeater unit (wire to HPCF fiber)
Screw - HPCF
connector
CS1W-RPT02
Controller link repeater unit (wire to graded-index glass fiber)
Screw - ST connector
CS1W-RPT03
PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in.
9-pin D-sub to screw clamp terminals
PRT1-SCU11
PROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway.
Note: For Ethernet Cables and Accessories, see page 85
3 × RJ45 to screw clamp terminals
EJ1N-HFU-ETN
32
CS-Series CPU units
Rack PLC
Fast and powerful CPUs for any task
2
Omron's extensive function block library helps to reduce your programming effort,
while you can create your own function blocks to suit your specific needs.
PLC
Omron's CS1-series CPUs are available in two processor speeds, each in various
memory capacities. Besides the basic CPU models, versions are available for dual
redundant operation, supporting I/O hot-swapping. All CPUs have one dedicated
board slot with a direct CPU-bus connection, in which a serial communication board
or a loop control board can be mounted. All CPU units support IEC61131-3 structured
text and ladder language.
Ordering information
Max. Digital I/O Program
points
capacity
5120
250K steps
Data memory
capacity
448K words
Logic execution
speed
Max. I/O units
Additional functions
Order code
20 ns
80
–
CS1H-CPU67H
71
Supports duplex power supply and I/O hot-swapping
CS1D-CPU67S
68
CPU for full dual-redundancy
CS1D-CPU67H
CPU for full dual-redundancy, with loop control board
CS1D-CPU67P
120K steps
256K words
80
–
CS1H-CPU66H
60K steps
128K words
80
–
CS1H-CPU65H
71
Supports duplex power supply and I/O hot-swapping
CS1D-CPU65S
68
CPU for full dual-redundancy
CS1D-CPU65H
CPU for full dual-redundancy, with loop control board
CS1D-CPU65P
–
CS1H-CPU64H
–
CS1H-CPU63H
–
CS1G-CPU45H
40
–
CS1G-CPU44H
35
Supports duplex power supply and I/O hot-swapping
CS1D-CPU44S
30
–
CS1G-CPU43H
–
CS1G-CPU42H
Supports duplex power supply and I/O hot-swapping
CS1D-CPU42S
Description
Remarks
Order code
High-speed data collection and storage unit, with CF card slot and Ethernet port
CPU bus unit
CS1W-SPU01-V2
High-speed data collection and storage unit, with CF card slot and 2 Ethernet ports
CPU bus unit
CS1W-SPU02-V2
Duplex unit, required for CS1D-CPU6_H systems
–
CS1D-DPL01
Serial communication option board, 2 x RS-232C
–
CS1W-SCB21-V1
Serial communication option board, 1 x RS-232C + 1 x RS422/RS-485
–
CS1W-SCB41-V1
Loop control option board
50 control blocks max.
CS1W-LCB01
Loop control option board
300 control blocks max.
CS1W-LCB05
Replacement battery set, for all CS1 CPUs
–
CS1W-BAT01
Compact Flash memory card, 128 MB, for all models (not required for operation)
Industrial grade
HMC-EF183
Compact Flash memory card, 256 MB, for all models (not required for operation)
Industrial grade
HMC-EF283
Compact Flash memory card, 512 MB, for all models (not required for operation)
Industrial grade
HMC-EF583
Compact Flash PC-Card adapter
–
HMC-AP001
30K steps
64K words
80
20K steps
60K steps
1280
960
40 ns
30K steps
20K steps
10K steps
26
Accessories
CX-One, integrated software for programming and configuration of all Omron control system com- –
ponents
CX-ONE-AL_ _ C-E
Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port
length: 2.0 m
CS1W-CN226
Connection cable, D-Sub 9-pin PC serial port to PLC peripheral port
length: 6.0 m
CS1W-CN626
USB to serial conversion cable
–
CS1W-CIF31
33
CS-Series power supplies, backplanes
Rack PLC
Expand with up to 7 racks
CS1 systems can operate on 24 VDC power supply, or on 100-240 VAC mains. For
small-scale systems with mainly digital I/O a low cost, small capacity power supply
can be used. For systems with many analogue I/Os and control/communication units,
it may be necessary to use a larger power supply unit.
PLC racks are available in several sizes, from 2 to 10 slots wide. Special backplanes
are required for duplex systems. Depending on the CPU type, up to 7 expansions can
be connected to the CPU rack, giving a total capacity of 80 I/O units. The total length
of the expansion cables of one system may be up to 12 m.
Ordering information
Power supplies
Input range
Power
consumption
19.2 to 28.8 VDC
40 W max.
55 VA max.
85 to 264 VAC
50/60 Hz
120 VA max.
Output capacity
5 VDC
Output capacity 26
VDC
Max. output
power
Extra functions
Order code
6.6 A
0.62 A
30 W
–
C200HW-PD024
4.3 A
0.56 A
28 W
Power supply for dual-redundant system
CS1D-PD024
5.3 A
1.3 A
40 W
–
C200HW-PD025
Power supply for dual-redundant system
CS1D-PD025
Maintenance status display
C200HW-PA204C
–
C200HW-PA204
Service output 24 VDC, 0.8 A
C200HW-PA204S
Run status output (SPST relay)
C200HW-PA204R
4.6 A
0.62 A
30 W
85 to 132 VAC,
170 to 264 VAC,
50/60 Hz
180 VA max.
9.0 A
1.3 A
45 W
Run status output (SPST relay)
C200HW-PA209R
150 VA max.
7.0 A
1.3 A
35 W
Power supply for dual-redundant system
CS1D-PA207R
Type
Slots
Expansion connector Width
Special functions
Order code
CPU backplane
2
No
200 mm
–
CS1W-BC023
CPU backplane
3
Yes
260 mm
–
CS1W-BC033
CPU backplane
5
Yes
330 mm
–
CS1W-BC053
CPU backplane
8
Yes
435 mm
–
CS1W-BC083
CPU backplane
10
Yes
505 mm
–
CS1W-BC103
Expansion backplane
3
Yes
260 mm
–
CS1W-BI033
Expansion backplane
5
Yes
330 mm
–
CS1W-BI053
Expansion backplane
8
Yes
435 mm
–
CS1W-BI083
Expansion backplane
10
Yes
505 mm
–
CS1W-BI103
CPU backplane
5
Yes
505 mm
For Duplex CPU + Power supplies
CS1D-BC052
CPU backplane
8
Yes
505 mm
For Duplex Power supplies
CS1D-BC082S
Expansion backplane
9
Yes
505 mm
For Duplex Power supplies
CS1D-BI092
Type
Remarks
Specifications
I/O Expansion cable to connect
CS1 CPU backplane or
Expansion backplane to next
Expansion backplane.
34
Order code
0.3 m
CS1W-CN313
0.7 m
CS1W-CN713
2.0 m
CS1W-CN223
3.0 m
CS1W-CN323
5.0 m
CS1W-CN523
10.0 m
CS1W-CN133
12.0 m
CS1W-CN133-B2
CS-Series digital I/O units
Rack PLC
Up to 96 I/O points per unit –
input, output or mixed
2
CS1 units are available with various I/O densities and connection technologies.
Up to 16 I/O points can be wired to units with detachable M3 screw terminals directly.
High-density 32- and 64- point I/O units are equipped with standard 40-pin connectors. Prefabricated cables and wiring terminals are available for easy interfacing
to high-density I/O units.
PLC
Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence
control. A full range of units, from high-speed DC inputs to relay outputs, let you adapt
CS1 to your needs.
Ordering information
Connection type
Order code*1
10 mA –
M3
CS1W-IA111
10 mA –
M3
CS1W-IA211
24 VDC
7 mA –
M3
CS1W-ID211
DC input
24 VDC
7 mA Inputs start interrupt tasks in PLC program
M3
CS1W-INT01
16
DC input
24 VDC
7 mA Latches pulses down to 50 μs pulse width
M3
CS1W-IDP01
32
DC input
24 VDC
6 mA –
1×40 pt Fujitsu
CS1W-ID231
64
DC input
24 VDC
6 mA –
2×40 pt Fujitsu
CS1W-ID261
96
DC input
24 VDC
5 mA –
2×56 pt Fujitsu
CS1W-ID291
8
Triac output
250 VAC
1.2 A –
M3
CS1W-OA201
16
Triac output
250 VAC
0.5 A –
M3
CS1W-OA211
8
Relay output
250 VAC
2.0 A –
M3
CS1W-OC201
16
Relay output
250 VAC
2.0 A –
M3
CS1W-OC211
16
DC output (sink)
12 to 24 VDC
0.5 A –
M3
CS1W-OD211
16
DC output (source)
0.5 A With short-circuit protection, alarm
M3
CS1W-OD212
32
DC output (sink)
0.5 A –
1×40 pt Fujitsu
CS1W-OD231
32
DC output (source)
0.5 A With short-circuit protection, alarm
1×40 pt Fujitsu
CS1W-OD232
64
DC output (sink)
0.3 A –
2×40 pt Fujitsu
CS1W-OD261
64
DC output (source)
0.3 A With short-circuit protection, alarm
2×40 pt Fujitsu
CS1W-OD262
96
DC output (sink)
12 to 24 VDC
0.1 A –
2×56 pt Fujitsu
CS1W-OD291
96
DC output (source)
24 VDC
0.1 A –
2×56 pt Fujitsu
CS1W-OD292
32+32
DC output (sink)
12 to 24 VDC
0.3 A –
2×40 pt Fujitsu
CS1W-MD261
32+32
DC in+out (source)
0.3 A With short-circuit protection, alarm
2×40 pt Fujitsu
CS1W-MD262
48+48
DC output (sink)
12 to 24 VDC
0.1 A –
2×56 pt Fujitsu
CS1W-MD291
48+48
DC in+out (source)
12 to 24 VDC
0.1 A –
2×56 pt Fujitsu
CS1W-MD292
Points
Type
16
AC or DC input
120 VAC or VDC
16
AC input
240 VAC
16
DC input
16
*1
Rated voltage
Rated
current
24 VDC
12 to 24 VDC
24 VDC
12 to 24 VDC
24 VDC
24 VDC
Remarks
C200H I/O units can also be mounted, except on CS1D systems.
Note: All Digital I/O units are designated as Basic I/O units.
Accessories
Description
Connection type
Order code
Connection cable between I/O terminal block and I/O unit with 40-pt Fujitsu connector ( _ _ _ = length in cm)
Fujitsu (40pt)
XW2Z-___B
I/O terminal block for input unit with 40-pt Fujitsu connector
Push-in
XW2R-P34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector
Push-in
XW2R-P34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connector
Clamp
XW2R-E34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector
Clamp
XW2R-E34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connector
M3 Screws
XW2R-J34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector
M3 Screws
XW2R-J34G-C3
Note: For I/O Cables and Terminal Blocks, see page 76
35
CS-Series analogue and process I/O units
Rack PLC
From basic analogue I/O to process control
CS1 offers a wide choice of analogue input units, fit for any application, from lowspeed, multi-channel temperature measurement to high-speed, high-accuracy data
acquisition. Analogue outputs can be used for accurate control or external indication.
Advanced units with built-in scaling, filtering and alarm functions reduce the need for
complex PLC programming. High-accuracy process I/O units support an extensive
range of sensors, for fast and accurate data acquisition. All process and temperature
I/O units provide isolation between all individual channels.
Ordering information
Points
Type
4
Analogue input
8
Analogue input
16
Analogue input
4
Ranges
Resolution
Accuracy*1
V:
I:
0 to
0 to
-10 to
1 to
4 to
5 V,
10 V,
10 V,
5 V,
20 mA
1/8,000
Analogue output
0 to
0 to
-10 to
1 to
4 to
5 V,
10 V,
10 V,
5 V,
20 mA
1/4,000
8
Voltage output
0 to
0 to
-10 to
1 to
5 V,
10 V,
10 V,
5V
8
Current output
4 to
4+4
Analogue in + output
0 to
5 V,
0 to
10 V,
-10 to
10 V,
1 to
5V
(4 to 20 mA input)
1/8,000
4
Process input
4 to
20 mA,
0 to
20 mA,
0 to
10 V,
-10 to
10 V,
0 to
5 V,
-5 to
5 V,
1 to
5 V,
1 to 1.25 V,
-1.25 to 1.25 V
8
Process input
4
Thermocouple input
4
Resistance thermometer input Pt50, Pt100 JPt100,
Ni508.4
1/64,000
4
Thermocouple input
4
Resistance thermometer input Pt100, JPt100
8
Thermocouple input
8
0.2% of PV
0.4% of PV
Conversion
time
250 μs/point
Remarks
Connection
type
Order code
Offset/gain adjustment, peak hold,
moving average, alarms
M3
CS1W-AD041-V1
M3
CS1W-AD081-V1
0.2% of PV
V:
I:
0.3% of PV
0.5% of PV
2 x MIL (34p.) CS1W-AD161
1 ms/point
0.3% of PV
20 mA
Offset/gain adjustment
M3
CS1W-DA041
Offset/gain adjustment, output hold
M3
CS1W-DA08V
M3
CS1W-DA08C
0.5% of PV
V in: 0.2% of PV
I in: 0.4% of PV
out: 0.3% of PV
1 ms/point
Offset/gain adjustment, scaling, peak
hold, moving average, alarms, output
hold
M3
CS1W-MAD44
1/64,000
0.05% of PV
5 ms/point
Configurable alarms, maintenance
M3
functions, user-defined scaling, zero/
span adjustment, square root, totaliser.
CS1W-PDC11
1/16,000
0.3% of PV
62.5 ms/point
Configurable alarms, zero/span adjust- M3
ment, square root
CS1W-PDC55
B, E, J, K, L, N, R, S, T, 1/64,000
U, WRe5-26, PLII,
-100 to 100 mV
0.05% of PV
5 ms/point
Configurable alarms (absolute +
rate-of-change), peak hold,
maintenance functions
M3
CS1W-PTS11
0.05% of PV
5 ms/point
Configurable alarms (absolute +
rate-of-change), peak hold,
maintenance functions
M3
CS1W-PTS12
0.1°C
0.3% of PV
62.5 ms/point
4 configurable alarm outputs
M3
CS1W-PTS51
0.1°C
0.3% of PV
62.5 ms/point
4 configurable alarm outputs
M3
CS1W-PTS52
0.1°C
0.3% of PV
31.2 ms/point
Configurable alarms per channel
M3
CS1W-PTS55
Resistance thermometer input Pt100, JPt100
0.1°C
0.3% of PV
31.2 ms/point
Configurable alarms per channel
M3
CS1W-PTS56
4
2-Wire transmitter input
1 to
4 to
5 V,
20 mA
1/4,096
0.2% of FS
25 ms/point
Built-in power supply for transmitter,
configurable alarms, square root,
rate-of-change, etc.
M3
CS1W-PTW01
8
Power transducer input
-1 to
0 to
1 mA,
1 mA
1/4,096
0.2% of FS
25 ms/point
Inrush current limiter, configurable
alarms, averaging, etc.
M3
CS1W-PTR01
8
Power transducer input
-100 to
0 to
100 mV,
100 mV
1/4,096
0.2% of FS
25 ms/point
Inrush current limiter, configurable
alarms, averaging, etc.
M3
CS1W-PTR02
4
Pulse rate input
25 ms/point
Averaging, totaliser
M3
CS1W-PPS01
36
-10 to
0 to
1 to
4 to
10 V,
5 V,
5 V,
20 mA
B, J, K, L, R, S, T
B, J, K, L, R,S, T
20000 pps, voltage,
up to
open collector, contact 1/32,000
–
CS-Series analogue and process I/O units
Type
4
Isolated control output
1 to
4 to
4
Isolated control output
-10 to
0 to
-5 to
0 to
-1 to
0 to
*1
Resolution
Accuracy*1
5 V,
20 mA
1/4,000
I:
V:
10 V,
10 V,
5 V,
5 V,
1 V,
1V
1/4,000
Ranges
Conversion
time
Remarks
Connection
type
Order code
0.1% of FS
0.2% of FS
25 ms/point
Output readback, high/low/rate limiting, M3
disconnection alarm, zero/span
adjustment
CS1W-PMV01
0.1% of FS
10 ms/point
High/low/rate limiting, output hold,
zero/span adjustment
CS1W-PMV02
M3
PLC
Points
Rack PLC
Accuracy for Voltage and Current Inputs/Outputs as percentage of full scale and typical value at 25°C ambient temperature (Consult the operation manual for details)
Accuracy for Temperature Inputs/Outputs as percentage of process value and typical value at 25°C ambient temperature (Consult the operation manual for details)
2
Note: All analogue I/O units are designated as special I/O units
37
CS-Series position/motion control units
Rack PLC
Add motion control to any CS1 PLC
From simple position measurement to multi-axis synchronised motion control, CS1
offers a full range of units:
• Counter units gather position information from SSI- or incremental encoders.
Actual positions are compared with internally stored target values.
• Position control units are used for point-to-point positioning with servo drives or
stepper motors. Target data and acceleration/deceleration curves can be adjusted
on-the-fly.
• Position- and motion control units equipped with MECHATROLINK-II interface can
control multiple drives through a single high-speed link. Message routing through
multiple communication layers allows the attached drives to be configured from
any point in the control network.
Ordering information
Channels/
Axes
Type
Signal type
Unit class
Remarks
Connection type
Order code
2
SSI inputs
(absolute position data)
Synchronous
serial protocol
Special I/O unit
Baud rate, encoding type, data length,
etc. can be set per channel
2 digital outputs, NPN/PNP selectable.
M3 screw
CS1W-CTS21
2
500 kHz Counter
24 V, 12V, line driver
Special I/O unit
4 configurable digital inputs +
4 configurable digital outputs
Target values trigger interrupt to CPU
1 × Fujitsu (40 pt)
CS1W-CT021
2 × Fujitsu (40 pt)
CS1W-CT041
4
1
Position control unit
24V open collector
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CS1W-NC113
2
Position control unit
24V open collector
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CS1W-NC213
4
Position control unit
24V open collector
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
2 × Fujitsu (40 pt)
CS1W-NC413
1
Position control unit
Line driver
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CS1W-NC133
2
Position control unit
Line driver
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
1 × Fujitsu (40 pt)
CS1W-NC233
4
Position control unit
Line driver
Special I/O unit
500 kpps pulse outputs, inputs for origin,
limit switches, stop, interrupt
2 × Fujitsu (40 pt)
CS1W-NC433
2
Motion control unit
Analogue
Special I/O unit
Closed loop with automatic trapezoid or
S-curve acceleration/deceleration
Snap-on connectors (3M)
CS1W-MC221-V1
4
Motion control unit
Analogue
Special I/O unit
Closed loop with automatic trapezoid or
S-curve acceleration/deceleration
Snap-on connectors (3M)
CS1W-MC421-V1
Description
Connection type
Order code
Servo relay unit 1-Axis position control unit
–
XW2B-20J6-1B
Servo relay unit 2-Axes position control unit
–
XW2B-40J6-2B
Cable connecting servo relay unit to Position control unit CS1W-NC113, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A6
Cable connecting servo relay unit to Position control unit CS1W-NC213/413, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A7
Cable connecting servo relay unit to Position control unit CS1W-NC113, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A6
Cable connecting servo relay unit to Position control unit CS1W-NC213/413, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A7
Cable connecting servo relay unit to Position control unit CS1W-NC133, cable length 1 m. For Accurax G5 servo drives.
–
XW2Z-100J-A10
Cable connecting servo relay unit to Position control unit CS1W-NC233/433, cable length 1 m. Accurax G5 servo drives.
–
XW2Z-100J-A11
Cable connecting servo relay unit to Position control unit CS1W-NC133, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A10
Cable connecting servo relay unit to Position control unit CS1W-NC233/433, cable length 1 m. For SmartStep 2 servo drives.
–
XW2Z-100J-A11
Cable connecting servo relay unit to Accurax G5 servo drives, cable length 1 m.
–
XW2Z-100J-B25
Cable connecting servo relay unit to SmartStep 2 servo drive, cable length 1 m.
–
XW2Z-100J-B29
Accessories
Note: For General-purpose I/O Cables and Terminal Blocks, see page 76
38
CS-Series communication units
Rack PLC
Open to any communication, standard or
user-defined
Ordering information
Type
Ports
Protocols
Remarks
Connection type
Order code
Serial
2 × RS-232C
CompoWay/F, Host Link, NT link, Modbus, CPU bus unit
User-defined
Unit class
–
9-pin D-Sub
CS1W-SCU21-V1
Serial
2 × RS-232C/RS-485
CompoWay/F, Host Link, NT link, Modbus, CPU bus unit
User-defined
–
9-pin D-Sub
CS1W-SCU31-V1
Serial
2 × RS-232C
CompoWay/F, Host Link, NT link, Modbus, CPU option board
User-defined
–
9-pin D-Sub
CS1W-SCB21-V1
Serial
1 × RS-232C +
1 × RS-422/RS-485
CompoWay/F, Host Link, NT link, Modbus, CPU option board
User-defined
–
9-pin D-Sub
CS1W-SCB41-V1
GP-IB
Master/Slave selectable
GP-IB instrument
communication
Special I/O unit
–
GP-IB
CS1W-GPI01
Ethernet
1 × 100 Base-Tx
UDP, TCP/IP, FTP server,
SMTP (e-mail), SNTP (time adjust),
FINS routing, socket service
CPU bus unit
–
RJ45
CS1W-ETN21
Controller link
2-wire twisted pair
Omron proprietary
CPU bus unit
–
2-wire screw + GND
CS1W-CLK23
Optical HPCF
–
2 × HPCF connector
CS1W-CLK13
Optical graded-index fiber
–
4 × ST connector
CS1W-CLK53
EtherNet/IP
1 × 100 Base-Tx
EtherNet/IP, UDP, TCP/IP, FTP server,
SNTP, SNMP
CPU Bus unit
31 mm
RJ45
CS1W-EIP21
DeviceNet
1 × CAN
DeviceNet
CPU bus unit
–
5-p detachable
CS1W-DRM21-V1
CompoNet
4-wire, data + power to slaves CompoNet (CIP-based)
(Master)
Special I/O unit
–
4-p detachable IDC
or screw
CS1W-CRM21
PROFIBUS-DP
1 × RS-485 (Master)
DP, DPV1
CPU bus unit
–
9-pin D-Sub
CS1W-PRM21
CAN
1 × CAN
CANopen, User-defined
CPU bus unit
–
5-p detachable
CS1W-CORT21
PROFINET IO
1 × 100 Base-Tx
PROFINET IO controller
FINS UDP
CPU bus unit
–
RJ45
CS1W-PNT21
PROFIBUS-DP
1 × RS-485 (Slave)
DP
C200H special
I/O unit
C200H units cannot be
used on CS1D systems
9-pin D-Sub
C200HW-PRT21
CompoBus/S
2-wire (Master)
Omron proprietary
C200H special
I/O unit
2-wire screw +
2-wire power
C200HW-SRM21-V1
Description
Connection type
Order code
RS-232C to RS-422/RS-485 signal converter. Mounts directly on serial port.
9-pin D-sub to screw clamp CJ1W-CIF11
terminals
Controller link PCI board with support software
PCI, wired CLK
3G8F7-CLK23-E
Controller link PCI board with support software
PCI, HPCF connectors
3G8F7-CLK13-E
Controller link PCI board with support software
PCI, ST connectors
3G8F7-CLK53-E
Controller link repeater unit (wire to wire)
Screw - Screw
CS1W-RPT01
Controller link repeater unit (wire to HPCF fiber)
Screw - HPCF connector
CS1W-RPT02
Controller link repeater unit (wire to graded-index glass fiber)
Screw - ST connector
CS1W-RPT03
PROFIBUS DP to RS-422/RS-485 Serial Gateway. User-configurable, with Omron protocols built-in.
9-pin D-sub to screw clamp PRT1-SCU11
terminals
PROFINET IO + ModBus/TCP to Modbus/RTU (RS-485) Gateway.
3 × RJ45 to screw clamp
terminals
Accessories
EJ1N-HFU-ETN
Note: For Ethernet Cables and Accessories, see page 85
39
2
Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP.
For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of
installation. Fully user-configurable serial and CAN-based communication can be
used to emulate a variety of application-specific protocols. EtherNet/IP units provide
data link functions to share large amounts of data between PLCs. The PROFINETIO controller together with the SmartSlice modular I/O system offers ethernet-based
I/O with controller- and network redundancy.
PLC
CS1 provides both standardised open networks interfaces, and cost efficient,
high-speed proprietary network links. Datalinks between PLCs, or to higher-level
information systems can be made using Serial or Ethernet links, or the easy-to-use
Controller Link network.
Remote I/O
Отдалечени входно / изходни модули
I/O SYSTEMS TO MEET EVERY NEED
Choose by network, style and flexibility
Compact remote I/O units combine a fixed number of I/O points in a space-saving housing. Built-in
smart monitoring functions for voltage level, broken wire, actuator and cycle time will assist in planning
preventive maintenance for machines and eliminating costly downtime. Compact smart slaves are
available for the open EtherCAT, DeviceNet and CompoNet networks, and Omron’s CompoBus/S offers
a more simple and cost-efficient solution.
Modular remote I/O systems offer the possibility to install just the right number and type of I/O's where
you need them. I/O modules range from basic and economical digital I/O's to high-performance modules
with intelligent functions. With a choice of communication couplers for various open networks, you can
adapt to existing installations and end-user demands, or make the right trade-off between performance
and ease-of-use. Besides EtherCAT as main machine automation network, Omron offers connectivity to
DeviceNet, CompoNet, PROFINET IO, PROFIBUS DP, and MECHATROLINK-II.
DeviceNet
40
EtherCAT
IP67
IP20
Compact
Compact
DRT2-_C_
Page 50
IP20
Modular
High-speed
modular
Compact
DRT2
NX-series
GX
Page 47
Page 43
Page 46
Modular
Remote I/O
3
Remote I/O
MECHATROLINK-II
PROFIBUS-DP
PROFINET IO
CompoNet
IP20
IP20
IP20
IP20
Modular
Modular
Modular
CompoBus/S
IP20
IP67
Compact
Compact
Compact
SmartSlice
CRT1
SRT2
SRT2-_C_
Page 45
Page 48
Page 49
Page 51
Modular
41
Selection table
Modular I/O
Model
NX-series
Network connection EtherCAT in- and outgoing
connections by RJ45 ethernet
plug
I/0 types Digital standard and highspeed synchronous, analogue
standard and high-speed,
temperature, encoders,
pulse output
I/0 Connection technology Push-in wiring on removable
terminal block
Smart features Synchronous I/O over
EtherCAT, timestamping,
safety I/O
Ingress Protection class IP20
(DIN rail mounting in cabinets)
Page 43
Compact I/O
SmartSlice
I/0 Connection technology M3 screw terminals
(1- or 3-wire DI)
Smart features I/O isolation, status indication
Ingress Protection class IP20
(DIN rail mounting in cabinets)
Page 49
42
CRT1
DeviceNet with open-style
push-in terminal block
CompoNet, unshielded 4-wire
flat cable and IDC connectors,
or general-purpose 2-wire
cable by screw terminals
Digital I/O, analogue I/O,
temperature inputs,
high-speed counter with
control outputs
8 DI + 8 DO
16 DI+extension
16 DO+extension
16 relay out
4 AI (V/I)
2 AO (V/I)
Incremental encoder
(24 V/line driver)
8/16 DI+extension,
8/16 DO+extenstion,
8 DI + 8 DO
16 relay out,
4 AI (V/I, TC, Pt100),
2 AO (V/I),
8/16 DI+extension,
8/16 DO+extenstion,
8 DI + 8 DO
4 AI, 2 AO, 2 DI, 2 DO
Push-in wiring on removable
terminal block
M3 screw terminals
(1- or 3-wire DI)
M3 screw terminals
(1- or 3-wire DI)
M3 screw terminals
I/O and power supply diagnos- automatic or fixed address
tics, operation timers and
allocation
counters per I/O point
I/O and power supply diagnostics, operation timers and
counters per I/O point,
analogue value calculations
and alarms
I/O and power supply diagnostics, operation timers and
counters for each I/O point,
analogue value calculations
and alarms
IP20
(DIN rail mounting in cabinets)
IP20
(DIN rail mounting in cabinets)
IP20
(DIN rail mounting in cabinets)
IP20
(DIN rail mounting in cabinets)
45
46
47
48
Field I/0
DRT2-_C_
DeviceNet with M12 micro
connector
SRT2-_C_
CompoBus/S, by 4-wire M12
connector, unshielded
Отдалечени входно / изходни модули
I/0 types 4/8/16 DI,
4/8/16 DO,
8/16 relay out,
4 AI (V/I) 2 AO (V/I)
DRT2
EtherCAT in- and outgoing
connections by RJ45 ethernet
plug
SRT2
Network connection CompoBus/S,
(2-wire + power)
by M3 screw terminals
GX
DeviceNet, CompoNet,
PROFIBUS DP, PROFINET I/O,
EtherCAT, MECHATROLINK-II
Compact I/O
Model
Remote I/O
Отдалечени входно / изходни модули
8/16 DI, 8/16 DO, 8DI + 8 DO
4/8 DI, 4/8 DO
M12, 1 or 2 I/O signals per
connector, 7/8" I/O Power
connector
M12 connectors,
one I/O point per connector
I/O and power supply diagnos- I/O isolation, status indication
tics, operation timers and
counters per I/O point
IP67,
flat mounting by
two M5 screws
IP67,
flat mounting by
three M5 screws
50
51
NX-series modular I/O system
Remote I/O
NX-series I/O covers a full range of units, including standard and high-speed digital
I/O's, various performance levels in analog I/O, encoder inputs and pulse outputs. The
series continues to expand with time-stamped I/O, safety I/O and application-specific
modules.
•
•
•
•
Ideal match with Sysmac machine automation controllers
Synchronous I/O updates, system-wide, with less than 1 μs jitter
High density: up to 16 digital or 8 analog signals in 12 mm width
Removable wiring terminals for easy system assembly and testing
Ordering information
Module type
Signal type
Performance
Channels
Width
Order code
Communication coupler
EtherCAT slave
Up to 63 I/O units
Max. 1,024 bytes in + 1,024 bytes out
Supports Distributed Clock
Maximum I/O power supply 4 A
2
46 mm
NX-ECC201
Up to 63 I/O units
Max. 1,024 bytes in + 1,024 bytes out
Supports Distributed Clock
Maximum I/O power supply 10 A
Safety controller
Digital input
Safety over EtherCAT protocol
For up to 256 Safety I/O points
32
30 mm
NX-SL3300
For up to 1,024 Safety I/O points
128
30 mm
NX-SL3500
Standard (< 0.4 ms On/Off-delay)
4
12 mm
NX-ID3317
8
12 mm
NX-ID4342
16
12 mm
NX-ID5342
High-speed (< 0.1 μs On/Off-delay)
4
12 mm
NX-ID3343
High-speed with Time-stamp
4
12 mm
NX-ID3344
Standard (< 0.4 ms On/Off-delay)
4
12 mm
NX-ID3417
8
12 mm
NX-ID4442
16
12 mm
NX-ID5442
High-speed (< 0.1 μs On/Off-delay)
4
12 mm
NX-ID3443
High-speed with Time-stamp
4
12 mm
NX-ID3444
with connectivity to Omron safety devices
4
12 mm
NX-SIH400
High-density unit
8
12 mm
NX-SID800
AC input, 240 VAC
Individually isolated inputs
4
12 mm
NX-IA3117
NPN type
Standard (< 0.8 ms On/Off-delay)
4
12 mm
NX-OD3121
8
12 mm
NX-OD4121
16
12 mm
NX-OD5121
High-speed (< 0.3 μs On/Off-delay)
4
12 mm
NX-OD3153
High-speed with Time-stamp
2
12 mm
NX-OD2154
Standard (< 1.0 ms On/Off-delay)
4
12 mm
NX-OD3256
8
12 mm
NX-OD4256
16
12 mm
NX-OD5256
High-speed (< 0.3 μs On/Off-delay)
4
12 mm
NX-OD3257
High-speed with Time-stamp
2
12 mm
NX-OD2258
0.5 A per point
4
12 mm
NX-SOD400
2.0 A per point
2
12 mm
NX-SOH200
Normally Open (SPST)
2
12 mm
NX-OC2633
Normally Open + Normally Closed (SPDT)
2
12 mm
NX-OC2733
PNP type, 500 kHz
1
12 mm
NX-EC0122
2
12 mm
NX-EC0222
Line driver, 4 MHz
1
24 mm
NX-EC0142
Synchronous serial, 2 MHz
1
12 mm
NX-ECS112
2
12 mm
NX-ECS212
1
12 mm
NX-PG0122
NPN type
PNP type
Safety inputs (PNP type)
Digital output
PNP type
Safety outputs (PNP type)
Relay, 250 VAC, 2 A
Encoder input
Incremental encoder
SSI encoder
Pulse output
NX-ECC202
Pulse Up/Down, Pulse + Direction
PNP type, 500 kHz
43
3
Modern machine control requires system-wide synchronisation of motion axes with
microsecond accuracy. The NX I/O system offers this timing accuracy and repeatability
for a wide variety of in- and outputs. Its ultra-fast internal bus system is synchronised
with the Distributed Clock of the EtherCAT network, resulting in system-wide deterministic I/O operation.
Remote I/O
Performance and practicality
for machine control
NX-series modular I/O system
Remote I/O
Module type
Signal type
Performance
Channels
Width
Order code
Analog input
4 to 20 mA
single ended
1/8,000 resolution
250 μs/channel
2
12 mm
NX-AD2203
4
12 mm
NX-AD3203
8
12 mm
NX-AD4203
2
12 mm
NX-AD2204
4
12 mm
NX-AD3204
8
12 mm
NX-AD4204
2
12 mm
NX-AD2208
4
12 mm
NX-AD3208
8
12 mm
NX-AD4208
2
12 mm
NX-AD2603
4
12 mm
NX-AD3603
8
12 mm
NX-AD4603
2
12 mm
NX-AD2604
4
12 mm
NX-AD3604
8
12 mm
NX-AD4604
2
12 mm
NX-AD2608
4
12 mm
NX-AD3608
8
12 mm
NX-AD4608
2
12 mm
NX-TS2101
4
24 mm
NX-TS3101
0.01°C resolution
10 ms/unit
2
12 mm
NX-TS2102
4
24 mm
NX-TS3102
0.001°C resolution
60 ms/unit
2
12 mm
NX-TS2104
4
24 mm
NX-TS3104
0.1°C resolution
250 ms/unit
2
12 mm
NX-TS2201
4
24 mm
NX-TS3201
0.01°C resolution
10 ms/unit
2
12 mm
NX-TS2202
4
24 mm
NX-TS3202
0.001°C resolution
60 ms/unit
2
12 mm
NX-TS2204
4
24 mm
NX-TS3204
1/8,000 resolution
250 μs/channel
2
12 mm
NX-DA2203
4
12 mm
NX-DA3203
1/30,000 resolution
10 μs/channel
2
12 mm
NX-DA2205
4
12 mm
NX-DA3205
1/8,000 resolution
250 μs/channel
2
12 mm
NX-DA2603
4
12 mm
NX-DA3603
1/30,000 resolution
10 μs/channel
2
12 mm
NX-DA2605
4
12 mm
NX-DA3605
NX bus power feed unit, 24 VDC input, non-isolated
12 mm
NX-PD1000
I/O power feed unit, for separation of power groups, maximum capacity 4 A
12 mm
NX-PF0630
I/O power feed unit, for separation of power groups, maximum capacity 10 A
12 mm
NX-PF0730
I/O power connection unit, 16 × IOV
12 mm
NX-PC0020
I/O power connection unit, 16 × IOG
12 mm
NX-PC0010
I/O power connection, 8 × IOV + 8 × IOG
12 mm
NX-PC0030
Grounding terminal, 16 points
12 mm
NX-TBX01
End cover (included with Communication Coupler)
12 mm
NX-END01
Replacement front connector with 8 wiring terminals (A+B)
12 mm
NX-TBA082
Replacement front connector with 8 wiring terminals (A+B with FG)
12 mm
NX-TBC082
Replacement front connector with 12 wiring terminals (A+B)
12 mm
NX-TBA122
Replacement front connector with 12 wiring terminals (C+D)
12 mm
NX-TBB122
Replacement front connector with 16 wiring terminals (A+B)
12 mm
NX-TBA162
Replacement front connector with 16 wiring terminals (C+D)
12 mm
NX-TBB162
Replacement front connector with 16 wiring terminals (A+B with FG)
12 mm
NX-TBC162
4 to 20 mA
differential
1/30,000 resolution
10 μs/channel
±10 V
single ended
1/8,000 resolution
250 μs/channel
±10 V
differential
1/30,000 resolution
10 μs/channel
Temperature sensor input
Thermocouple type
0.1°C resolution
B, E, J, K, L, N, R, S, T, U, WRe5-26, PL II 250 ms/unit
RTD type
Pt100 (3-wire), Pt1000, Ni508.4
Analog output
4 to 20 mA
±10 V
Power unit
System unit/Accessories
DIN rail insulation spacers (one set of 3 pcs)
Keying pins to prevent mismatch of unit and terminal block (one set for 10 units)
Note: For Ethernet cables and Accessories, see page 85
44
NX-AUX01
NX-AUX02
SmartSlice I/O system
Remote I/O
Omron's SmartSlice I/O system is compact, intelligent and easy. When used
with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration
tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analogue I/O units, PLC programming can be minimised. Preventive maintenance data can be accessed using CX-Integrator software, standard
PLC function blocks or NS-series Smart Active Parts.
Most compact in the market (84 mm high)
Easy set-up, backup and restore functions
Diagnostics and preventive maintenance data at I/O level
Detachable terminal blocks allow hot-swapping without re-wiring
3-wire connection with 'push-in' technology, no screwdriver
required for installation
3
•
•
•
•
•
Ordering information
Model
Function
Specifications
Size in mm
(HxWxD)
Order code
Interface units
DeviceNet interface unit
For up to 64 I/O units
84x58x70
GRT1-DRT
CompoNet interface unit
For up to 64 I/O units (limited to 32 byte in + 32 byte out)
84x58x70
GRT1-CRT
PROFIBUS-DP interface unit
For up to 64 I/O units
84x58x70
GRT1-PRT
PROFINET-IO interface unit
For up to 64 I/O units
84x58x70
GRT1-PNT
MECHATROLINK-II interface unit
For up to 64 I/O units (slave to Trajexia motion controller)
84x58x70
GRT1-ML2
EtherCAT interface unit
For up to 64 I/O units (slave to Trajexia and Sysmac controller)
84x58x70
GRT1-ECT
End plate
One unit required per bus interface
84x20x58
GRT1-END
End plate with memory function
Supports toolless replacement of PROFINET-IO interface unit
84x20x58
GRT1-END-M
4 NPN inputs
24 VDC, 6 mA, 3-wire connection
84x15x74
GRT1-ID4
4 PNP inputs
24 VDC, 6 mA, 3-wire connection
84x15x74
GRT1-ID4-1
8 NPN inputs
24 VDC, 4 mA, 1-wire connection + 4xG
84x15x74
GRT1-ID8
8 PNP inputs
24 VDC, 4 mA, 1-wire connection + 4xV
84x15x74
GRT1-ID8-1
4 AC inputs
110 VAC, 2-wire connection
84x15x74
GRT1-IA4-1
4 AC inputs
230 VAC, 2-wire connection
84x15x74
GRT1-IA4-2
4 NPN outputs
24 VDC, 500 mA, 2-wire connection
84x15x74
GRT1-OD4
4 PNP outputs
24 VDC, 500 mA, 2-wire connection
84x15x74
GRT1-OD4-1
4 PNP outputs with short-circuit protection 24 VDC, 500 mA, 3-wire connection
84x15x74
GRT1-OD4G-1
4 PNP outputs with short-circuit protection 24 VDC, 2 A, 2-wire connection
84x15x74
GRT1-OD4G-3
8 NPN outputs
24 VDC, 500 mA, 1-wire connection + 4xV
84x15x74
GRT1-OD8
8 PNP outputs
24 VDC, 500 mA, 1-wire connection + 4xG
84x15x74
GRT1-OD8-1
8 PNP outputs with short-circuit protection 24 VDC, 500 mA, 1-wire connection + 4xG
84x15x74
GRT1-OD8G-1
2 relay outputs
240 VAC, 2A, normally-open contacts
84x15x74
GRT1-ROS2
60 kHz Counter unit, NPN
A+B encoder inputs + 1 Z/control input + 1 output (NPN-type)
84x15x74
GRT1-CT1
60 kHz Counter unit, PNP
A+B encoder inputs + 1 Z/control input + 1 output (PNP-type)
84x15x74
GRT1-CT1-1
100 kHz Counter / Positioner unit
A+B+Z encoder inputs (line driver or 24 V selectable) + 1 control input + 2 outputs (PNP-type) 84x15x74
GRT1-CP1-L
2 analogue inputs, current/voltage
±10 V, 0-10 V, 0-5 V, 1-5 V, 0-20 mA, 4-20 mA
84x15x74
GRT1-AD2
2 analogue outputs, voltage
±10 V, 0-10 V, 0-5 V, 1-5 V
84x15x74
GRT1-DA2V
2 analogue outputs, current
0-20 mA, 4-20 mA
84x15x74
GRT1-DA2C
2 Pt100 inputs
Pt100, 2-wire or 3-wire connection
84x15x74
GRT1-TS2P
2 Pt1000 inputs
Pt1000, 2-wire or 3-wire connection
84x15x74
GRT1-TS2PK
2 Thermocouple inputs
Types B, E, J, K, N, R, S, T, U, W, PL2, with cold junction compensation
84x15x74
GRT1-TS2T
I/O units
Model
Description
Size in mm
(HxWxD)
Order code
Other units
I/O power feed unit, separates power supply between groups of I/O units
84x15x74
GRT1-PD2
I/O power feed unit with electronic overload protection, separates power supply between groups of I/O units
84x15x74
GRT1-PD2G
I/O power feed and distribution unit, separates power supply between groups of I/O units, 8xV + 4xG
84x15x74
GRT1-PD8
I/O power feed and distribution unit, separates power supply between groups of I/O units, 4xV + 8xG
84x15x74
GRT1-PD8-1
I/O power connection unit, 8xV + 4xG
84x15x74
GRT1-PC8
I/O power connection unit, 4xV + 8xG
84x15x74
GRT1-PC8-1
Turnback unit, right-hand side
84x20x58
GRT1-TBR
Turnback unit, left-hand side
84x58x70
GRT1-TBL
Turnback cable, one meter
1m
GCN2-100
Accessories
Description
Order code
Replacement front connectors, pack of 5 pcs.
GRT1-BT1-5
PROFIBUS-DP connector, 9-pin D-sub
PROFIBUS Connector 839550
PROFIBUS-DP connector, 9-pin D-sub, with bus termination
PROFIBUS Term. Conn. 846086
PROFINET RJ45 connector
IE-PS-RJ45-FH-BK
CompoNet connectors
See page 48
Remote I/O
The smartest modular I/O system
45
Compact I/O GX-series
Remote I/O
When speed counts: EtherCAT I/O
EtherCAT is an extremely fast industrial automation network, which uses standard
ethernet cabling. It makes very efficient use of the standard Ethernet transmission
frame, with each node accessing the entire frame on the fly. This reduces the delay
in each slave to microsecond level.
Its deterministic nature makes EtherCAT extremely suitable for motion control.
Omron provides PLC-based as well as stand-alone motion control solutions based on
EtherCAT.
The GX-series I/O units provide the basic in- and outputs for such systems, including
high-speed encoder inputs which can feed position information into the controller.
Ordering information
Unit Type
Specification
Size in mm
(HxWxD)
Remarks
Order code
16-point NPN input unit
24 VDC, 6 mA per point
52 x 135 x 57 Expandable with one XWT unit
GX-ID1611
16-point NPN input unit
24 VDC, 6 mA per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-ID1612
16-point PNP input unit
24 VDC, 6 mA per point
52 x 135 x 57 Expandable with one XWT unit
GX-ID1621
16-point PNP input unit
24 VDC, 6 mA per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-ID1622
16-point relay output unit
2 A per point, max. 8 A per common
52 x 160 x 58 with easy-to-replace relays, expandable with one XWT unit GX-OC1601
16-point NPN output unit
24 VDC, 0.5 A per point
52 x 135 x 57 Expandable with one XWT unit
GX-OD1611
16-point NPN output unit
24 VDC, 0.5 A per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-OD1612
16-point PNP output unit
24 VDC, 0.5 A per point
52 x 135 x 57 Expandable with one XWT unit
GX-OD1621
16-point PNP output unit
24 VDC, 0.5 A per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-OD1622
8-point input + 8-point output unit (NPN)
24 VDC, input 6 mA, output 0.5 A per point
52 x 135 x 57 –
GX-MD1611
8-point input + 8-point output unit (NPN)
24 VDC, input 6 mA, output 0.5 A per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-MD1612
8-point input + 8-point output unit (PNP)
24 VDC, input 6 mA, output 0.5 A per point
52 x 135 x 57 –
GX-MD1621
8-point input + 8-point output unit (PNP)
24 VDC, input 6 mA, output 0.5 A per point
52 x 200 x 69 3-tier connection for direct sensor wiring
GX-MD1622
4-Channel analogue input unit
1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA,
52 x 135 x 57 Resolution 1/6000, conversion time 4 ms (4 inputs)
GX-AD0471
2-Channel analogue output unit
1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA,
52 x 135 x 57 Resolution 1/6000, conversion time 2 ms (2 outputs)
GX-DA0271
1-Channel incremental encoder input (24V) Open collector, up to 125 kHz
52 x 215 x 69 A, B, Z, 2 x Latch, Reset inputs
GX-EC0211
1-Channel incremental encoder input (line RS422 signal level, up to 1 MHz
driver)
52 x 215 x 69 A, B, Z, 2 x Latch, Reset inputs
GX-EC0241
Expansion units
Unit Type
Specification
Size in mm
(HxWxD)
Remarks
Order code
8-point PNP input expansion unit
24 VDC, 6 mA per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID08-1
16-point PNP input expansion unit
24 VDC, 6 mA per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID16-1
8-point PNP output expansion unit
24 VDC, 0.5 A per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD08-1
16-point PNP output expansion unit
24 VDC, 0.5 A per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD16-1
3 port branching uni
24 VDC, 3 x RJ45
90x25x78
EtherCAT junction box for T-branching
GX-JC03
6 port branching unit
24VDC, 6 x RJ45
90x48x78
EtherCAT junction box for star branching
GX-JC06
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
46
Compact I/O DRT2
Remote I/O
Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding
power supply status, I/O response times, operation counters and on-time are
continuously recorded and checked against user-defined limits. Any deviation is
reported to the control system, as indication to perform machine maintenance and
prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function
Blocks and HMI Smart Active Parts, allowing program-less visualisation and
monitoring from the CJ1 PLCs and NS operator terminals.
Compact size IP20 housing
Expandable digital I/Os
Built-in diagnostics and preventive maintenance functions
Detachable I/O terminal blocks
Analogue I/O with data pre-processing and alarm functions
3
•
•
•
•
•
Remote I/O
Smart DeviceNet I/O
Ordering information
Unit type
Specifications
Size in mm
(HxWxD)
Remarks
Order code
8-point PNP input unit
24 VDC, 6 mA per point
50x115x50
–
DRT2-ID08-1
16-point PNP input unit
24 VDC, 6 mA per point
50x115x50
Expandable with one XWT unit
DRT2-ID16-1
16-point PNP input unit
24 VDC, 6 mA per point
50x180x58
3-tier connection for direct sensor wiring
DRT2-ID16TA-1
8-point PNP output unit
24 VDC, 0.5 A per point
50x115x50
–
DRT2-OD08-1
16-point PNP output unit
24 VDC, 0.5 A per point
50x115x50
Expandable with one XWT unit
DRT2-OD16-1
16-point PNP output unit
24 VDC, 0.5 A per point
50x180x58
3-tier connection for direct actuator wiring
DRT2-OD16TA-1
16-point relay output unit
2 A per point, max. 8 A per common
50x125x52
with easy-to-replace relays, expandable with one XWT unit DRT2-ROS16
8-point input + 8-point output unit (PNP)
24 VDC, input 6 mA, output 0.5 A per point
50x115x50
–
DRT2-MD16-1
8-point input + 8-point output unit (PNP)
24 VDC, input 6 mA, output 0.5 A per point
50x180x58
3-tier connection for direct sensor/actuator wiring
DRT2-MD16TA-1
4-Channel analogue input unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA,
4 to 20 mA
50x115x50
Resolution 1/6000, conversion time 4 ms (4 inputs)
DRT2-AD04
4-Channel analogue input unit
1 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA,
4 to 20 mA
50x115x50
Resolution 1/30000, conversion time 250 ms (4 inputs)
DRT2-AD04H
2-Channel analogue output unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 20 mA,
4 to 20 mA
50x115x50
Resolution 1/6000, conversion time 2 ms (2 outputs)
DRT2-DA02
4-Channel temperature input unit
Platinum Resistance Thermometer types Pt100, JPt100 50x115x50
0.3% accuracy, conversion time 250 ms (4 inputs)
DRT2-TS04P
4-Channel temperature input unit
Thermocouple types R, S, K, J, T, B, L, E, U, N, W,
and PL2
50x115x50
0.3% accuracy, conversion time 250 ms (4 inputs)
DRT2-TS04T
Unit type
Specifications
Size in mm
(HxWxD)
Remarks
Order code
8-point PNP input expansion unit
24 VDC, 6 mA per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID08-1
16-point PNP input expansion unit
24 VDC, 6 mA per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID16-1
8-point PNP output expansion unit
24 VDC, 0.5 A per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD08-1
16-point PNP output expansion unit
24 VDC, 0.5 A per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD16-1
Expansion units
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
Accessories
Type
Order code
Power supply tap with 2 fuses, 2 bus connectors and termination resistor
DCN1-1P
T-branch tap with 3 bus connectors (screw clamp) and terminating resistor
DCN1-1C
T-branch tap with 3 bus connectors (screwless)
DCN1-1NC
T-branch tap with 5 bus connectors (screw clamp) and terminating resistor
DCN1-3C
T-branch tap with 5 bus connectors (screwless)
DCN1-3NC
Terminating resistor with screw terminals
DRS1-T
47
Compact I/O CRT1
Remote I/O
Smart CompoNet I/O
Combining the smart features of DRT2 DeviceNet I/O and the speed and ease of use
of CompoBus/S, CompoNet is ideal for high-speed machine control with a flexible and
expandable architecture. The special flat cable and IDC connectors make installation
quick and easy. The use of repeaters allows wide-area networks with free topology,
ideal for conveyor- and warehouse automation.
•
•
•
•
•
Compact size IP20 housing
Expandable digital I/Os with detachable terminal blocks
Easy network wiring with IDC connections
Built-in diagnostics and preventive maintenance functions
Analogue I/O with data pre-processing and alarm functions
Ordering information
Unit type
Specifications
Size in mm
(HxWxD)
Remarks
Order code
4-point PNP input unit
24 VDC, 6 mA per point
24x80x20
Screwless I/O connector, power supply via CompoNet cable
CRT1B-ID04SL-1-300
8-point PNP input unit
24 VDC, 6 mA per point
50x115x57.6
Screw terminals, common power terminals per 8 points
CRT1-ID08-1
8-point PNP input unit
24 VDC, 6 mA per point
50x96x60
3 push-in terminals per I/O point (signal + power)
CRT1-ID08SL-1
16-point PNP input unit
24 VDC, 6 mA per point
50x115x50
Expandable with one XWT unit.
CRT1-ID16-1
16-point PNP input unit
24 VDC, 6 mA per point
52x180x69
3 terminals per I/O point (for power distribution)
CRT1-ID16TA-1
4-point PNP output unit
24 VDC, 0.2 A per point
24x80x20
Screwless I/O connector, power supply via CompoNet cable
CRT1B-OD04SL-1-300
8-point PNP output unit
24 VDC, 0.5 A per point
50x115x57.6
Screw terminals, common power terminals per 8 points
CRT1-OD08-1
8-point PNP output unit
24 VDC, 0.5 A per point
50x96x60
3 push-in terminals per I/O point (signal + power)
CRT1-OD08SL-1
16-point PNP output unit
24 VDC, 0.5 A per point
50x115x50
Expandable with one XWT unit.
CRT1-OD16-1
16-point PNP output unit
24 VDC, 0.5 A per point
52x180x69
3 terminals per I/O point (for power distribution)
CRT1-OD16TA-1
8-point SSR output unit
265 V AC, 0.3 A per point
50x95x57.6
Screw terminals, common power terminals per 8 points
CRT1-ROF08
8-point relay output unit
250 VAC, 2 A per point, 8 A per common
50x95x57.6
Screw terminals, common power terminals per 8 points
CRT1-ROS08
16-point relay output unit
250 VAC, 2 A per point, 8 A per common
50x140x57.6
8 outputs per common
CRT1-ROS16
2-point input + 2-point output unit, PNP
24 VDC, 0.1 A per point
24x80x20
Screwless I/O connector, power supply via CompoNet cable
CRT1-MD04SL-1-300
8-point input + 8-point output unit, PNP
24 VDC, 0.5 A per point
50x115x57.6
Screw terminals, common power terminals
CRT1-MD16-1
8-point input + 8-point output unit, PNP
24 VDC, 0.5 A per point
50x170x60
3 push-in terminals per I/O point (signal + power)
CRT1-MD16SL-1
8-point input + 8-point output unit PNP
24 VDC, 0.5 A per point
52x180x69
3 terminals per I/O point (for power distribution)
CRT1-MD16TA-1
4-Channel analogue input unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V,
0 to 20 mA, 4 to 20 mA
50x115x50
Resolution 1/6000, conversion time 4 ms (4 inputs)
CRT1-AD04
2-Channel analogue output unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V,
0 to 20 mA, 4 to 20 mA
50x115x50
Resolution 1/6000, conversion time 2 ms (2 outputs)
CRT1-DA02
4-Channel Temperature input unit
Platinum Resistance Thermometer type
Pt100
50x115x50
0.3% accuracy, conversion time 250 ms (4 inputs)
CRT1-TS04P
4-Channel Temperature input unit
Thermocouple types R, S, K, J, T, B, L, E, U, 50x115x50
N, W and PL2
0.3% accuracy, conversion time 250 ms (4 inputs)
CRT1-TS04T
Unit type
Specifications
Size in mm
(HxWxD)
Remarks
Order code
8-point PNP input expansion unit
24 VDC, 6 mA per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID08-1
16-point PNP input expansion unit
24 VDC, 6 mA per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-ID16-1
8-point PNP output expansion unit
24 VDC, 0.5 A per point
50x66x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD08-1
16-point PNP output expansion unit
24 VDC, 0.5 A per point
50x94x50
Expansion unit for GX, DRT2 and CRT1 series
XWT-OD16-1
Expansion units
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
Accessories
Unit type
Specifications
Size in mm
(HxWxD)
Remarks
Order code
CompoNet Repeater unit
1 upstream port + 1 downstream port
50x95x43
For extending CompoNet trunk lines, or creating branch lines
CRS1-RPT01
CompoNet 4-wire flat cable
For IP20 use
100 m
For power supply + communication, use with DCN4-connectors DCA4-4F10
CompoNet Branch connector for trunk line
For IP20 use
–
To create a branching point on a trunk line
DCN4-TR4
CompoNet Branch line end connector
For IP20 use
–
To connect a branch line to a trunk line
DCN4-BR4
CompoNet Y-connector
For IP20 use
–
To connect two line connectors to one slave unit
DCN4-MD4
CompoNet Screw terminal connector
For IP20 use
–
To provide conventional screw terminals for masters or slaves
DCN4-TB4
CompoNet Terminator
For IP20 use
–
Plugs in to DCN4-MD4 or DCN4-TR4
DCN4-TM4
CompoNet connector tool
For DCN4-connectors
–
To attach DCN4-connectors to DCA4-4F10 flat cable
DWT-A01
CompoNet Screw terminal connector
For IP20 use, box of 10 pcs
–
To provide conventional screw terminals for 4-point bit slaves
HCN-TB4LMZG-B10+
Bit slave flat cable plug
For CRT1B-_D04SL-1-300 slaves
–
Allows mounting bit slaves directly on flat cable
DCN4-MR4
Bit slave mounting plate
For CRT1B-_D04SL-1-300 slaves
–
Mount with two screws, bit slave clips in place
CRT1-ATT03
48
Compact I/O SRT2
Remote I/O
Omron's unique CompoBus/S is the original I/O bus for machine automation. With
free topology and up to 500 m bus length in long-distance mode, it can be
used as a remote I/O system. In high-speed mode (100 m max.) the guaranteed submillisecond cycle time makes it ideal for efficient machine control. Used with the
compact CPM2C-S PLC as master, your machine control system will fit in the smallest spaces.
Compact size in IP20 housing
Fast cycle time; less than 1 ms per 256 I/O points
Easy set-up; no software required
Choice of 4- 8- and 16-point Digital I/O; transistor-, and relay models
Analogue In/Outputs and customisable modules available
3
•
•
•
•
•
Ordering information
Unit type
Specifications
Size in mm (HxWxD)
Remarks
Order code
4-point PNP input unit
24 VDC, 6 mA per point
48x80x50
Compact IP20 I/O
SRT2-ID04-1
8-point PNP input unit
24 VDC, 6 mA per point
48x80x50
Compact IP20 I/O
SRT2-ID08-1
16-point PNP input unit
24 VDC, 6 mA per point
48x105x50
Compact IP20 I/O
SRT2-ID16-1
16-point PNP input unit
24 VDC, 6 mA per point
50x180x59
3-tier connection for direct sensor wiring
SRT2-ID16T-1
4-point PNP output unit
24 VDC, 0.3 A per point
48x80x50
Compact IP20 I/O
SRT2-OD04-1
8-point PNP output unit
24 VDC, 0.3 A per point
48x80x50
Compact IP20 I/O
SRT2-OD08-1
16-point PNP output unit
24 VDC, 0.3 A per point
48x105x50
Compact IP20 I/O
SRT2-OD16-1
16-point PNP output unit
24 VDC, 0.5 A per point
50x180x59
3-tier connection for direct sensor/actuator wiring
SRT2-OD16T-1
8-point input + 8-point output unit (PNP)
24 VDC, input 6 mA, output 0.3 A per point
50x180x59
3-tier connection for direct actuator wiring
SRT2-MD16T-1
8-point relay output unit
Max. 3 A per point
50x100x50
with easy-to-replace relays
SRT2-ROC08
16-point relay output unit
Max. 3 A per point
50x155x50
with easy-to-replace relays
SRT2-ROC16
4-Channel analogue input unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V,
0 to 20 mA, 4 to 20 mA
48x105x50
Resolution 1/6000, conversion time 4 ms (4 inputs)
SRT2-AD04
2-Channel analogue output unit
0 to 5 V, 1 to 5 V, 0 to 10 V, -10 to 10 V,
0 to 20 mA, 4 to 20 mA
48x105x50
Resolution 1/6000, conversion time 2 ms (2 outputs)
SRT2-DA02
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
Accessories
Type
Order code
CompoBus/S 4-wire flatcable for power and communication (100 m)
SCA1-4F10
CompoBus/S branch connector (IDC) for flatcable
SCN1-TH4
CompoBus/S termination connector (IDC) for flatcable
SCN1-TH4T
CompoBus/S termination block (screw connection)
SRS1-T
Remote I/O
Fast and easy over CompoBus/S
49
Field I/O DRT2-_C_
Remote I/O
DeviceNet I/O for harsh environments
Rugged I/O units for field mounting. The DRT2 slave units feature internal diagnostic
and maintenance data collection, which can be accessed over the network. Power
supply status, I/O response times, operation counters and on-time monitor data is
available at all times, and is internally checked against user-defined limits. Maintenance warnings will be generated when limits are exceeded. Using CX-One or NSseries HMI with Smart Active Parts for visualisation, this allows more efficient system
setup, commissioning and troubleshooting without any additional programming.
• IP67 protection, DRT2 versions are also oil- and welding-spatter proof
• Internal circuits powered by DeviceNet; fewer connections means less installation
errors
• Smart Slave functions for diagnostics and preventive maintenance
• Indication of broken wire and short-circuit in I/O signals
• M12 connectors for fast installation
Ordering information
Unit type
Specifications
Size in mm Remarks
(HxWxD)
Order code
4-point PNP input unit
24 V, 6 mA
123x60x44 Separate I/O power supply connection DRT2-ID04CL-1
8-point PNP input unit
24 V, 6 mA
175x60x44 Separate I/O power supply connection DRT2-ID08CL-1
8-point PNP input unit
24 V, 11 mA, with power short-circuit and sensor disconnection detection 175x60x38 Unit power supply via DeviceNet cable DRT2-ID08C-1
16-point PNP input unit
24 V, 6 mA, 2 inputs per M12 connector
175x60x44 Separate I/O power supply connection DRT2-HD16CL-1
16-point PNP input unit
24 V, 11 mA, 2 inputs per M12 connector,
with power short-circuit and sensor disconnection detection
175x60x38 Unit power supply via DeviceNet cable DRT2-HD16C-1
4-point PNP output unit
24 V, 0.5 A per point
123x60x44 Separate I/O power supply connection DRT2-OD04CL-1
8-point PNP output unit
24 V, 0.5 A per point
175x60x44 Separate I/O power supply connection DRT2-OD08CL-1
8-point PNP output unit
24 V, 1.5 A per point (8 A total), with short-circuit protection + indication
175x60x44 Separate I/O power supply connection DRT2-OD08C-1
16-point PNP output unit
24 V, 0.5 A per point, 2 points per M12 connector
175x60x44 Separate I/O power supply connection DRT2-WD16CL-1
8-point input + 8-point PNP output unit
24 V, 6 mA input, 0.5 A output per point, 2 points per M12 connector
175x60x44 Separate I/O power supply connection DRT2-MD16CL-1
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
Accessories
Unit type
Specifications
Order code
DeviceNet thin cable
with one M12 socket connector (female), 1 m
DCA1-5CN01F1
DeviceNet thin cable
with one M12 socket connector (female), 2 m
DCA1-5CN02F1
DeviceNet thin cable
with one M12 socket connector (female), 5 m
DCA1-5CN05F1
DeviceNet thin cable
with one M12 socket connector (female) and one M12 plug connector (male), 1 m
DCA1-5CN01W1
DeviceNet thin cable
with one M12 socket connector (female) and one M12 plug connector (male), 2 m
DCA1-5CN02W1
DeviceNet thin cable
with one M12 socket connector (female) and one M12 plug connector (male), 5 m
DCA1-5CN05W1
DeviceNet T-connector for thin cable
with two M12 socket connectors (female) + one M12 plug connector (male)
DCN2-1
DeviceNet terminator
with M12 plug connector
DRS2-1
Power supply cable
with one 7/8 inches socket connector (female), 2 m
XS4F-D421-102-A
Power supply cable
with one 7/8 inches socket connector (female), 5 m
XS4F-D421-105-A
Power supply cable
with one 7/8 inches socket connector (female) and one 7/8 inches plug connector (male), 2 m
XS4W-D421-102-A
Power supply cable
with one 7/8 inches socket connector (female) and one 7/8 inches plug connector (male), 5 m
XS4W-D421-105-A
Power supply T-connector
with two 7/8 inches socket connectors (female) + one 7/8 inches plug connector (male)
XS4R-D424-5
4-wire I/O connection cable
with one M12 plug connector (male), 1 m
XS2H-D421-C80-A
4-wire I/O connection cable
with one M12 plug connector (male), 2 m
XS2H-D421-D80-A
4-wire I/O connection cable
with one M12 plug connector (male), 5 m
XS2H-D421-G80-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 1 m
XS2W-D421-C81-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 2 m
XS2W-D421-D81-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 5 m
XS2W-D421-G81-A
Y-connector for 16-point I/O units
Splits the 2 I/O points per M12 connector to two M12 connectors
XS2R-D426-1
Y-connector cable for 16-point I/O units
Splits the 2 I/O points per M12 connector to two M12 connectors, 1 m
XS2R-D426-C11-F
M12 connector
M12 plug connector (male), solder type
XS2G-D421
M12 connector
M12 socket connector (female), solder type
XS2C-D421
IP67 cap for M12 sockets
Metal cap for unused I/O connections
XS2Z-12
50
Field I/O SRT2-_C_
Remote I/O
Rugged I/O units for field mounting. Omron's unique CompoBus/S is the most efficient I/O bus for machine automation. With free topology and up to 500 m bus length
in long-distance mode, it can be used as a remote I/O system. In high-speed mode
(100 m max.) the guaranteed sub-millisecond cycle time makes it ideal for efficient
machine control. With IP67 slave modules distributed throughout the machine, the
need for protective enclosures is minimised.
IP67 protection against dust and water
Fast cycle time; less than 1 ms for 256 I/O points
Easy setup; no software required
Choice of 4- and 8-point Digital I/O
M12 connectors for easy field wiring
3
•
•
•
•
•
Remote I/O
Dust- and waterproof CompoBus I/O
Ordering information
Unit type
Specifications
Size in mm (HxWxD)
Order code
4-point PNP input unit
24 V, 6 mA
114x54x45
SRT2-ID04CL-1
8-point PNP input unit
24 V, 6 mA
114x54x45
SRT2-ID08CL-1
4-point PNP output unit
24 V, 0.5 A per point
114x54x45
SRT2-OD04CL-1
8-point PNP output unit
24 V, 0.5 A per point
114x54x45
SRT2-OD08CL-1
Note: To order models with NPN (sinking) outputs and corresponding inputs (+V common), omit the "-1" from the model code.
Accessories
Unit type
Specifications
Remarks
Order code
CompoBus/S terminator
with M12 plug connector
–
SRS2-1
M12 connector
M12 plug connector (male), screw type
For CompoBus/S 4-wire round cable
XS2G-D4S7
M12 connector
M12 socket connector (female), screw type
For CompoBus/S 4-wire round cable
XS2C-D4S7
M12 T-connector (4-wire)
with two M12 socket connectors (female) + one M12 plug connector (male)
–
XS2R-D427-5
4-wire I/O connection cable
with one M12 plug connector (male), 1 m
–
XS2H-D421-C80-A
4-wire I/O connection cable
with one M12 plug connector (male), 2 m
–
XS2H-D421-D80-A
4-wire I/O connection cable
with one M12 plug connector (male), 5 m
–
XS2H-D421-G80-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 1 m
–
XS2W-D421-C81-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 2 m
–
XS2W-D421-D81-A
4-wire I/O connection cable
with one M12 socket connector (female) and one M12 plug connector (male), 5 m
–
XS2W-D421-G81-A
Y-connector for 16-point I/O units
Splits the 2 I/O points per M12 connector to two M12 connectors
–
XS2R-D426-1
Y-connector cable for 16-point I/O units
Splits the 2 I/O points per M12 connector to two M12 connectors, 1 m
–
XS2R-D426-C11-F
M12 connector
M12 plug connector (male), solder type
–
XS2G-D421
M12 connector
M12 socket connector (female), solder type
–
XS2C-D421
IP67 cap for M12 sockets
Metal cap for unused I/O connections
–
XS2Z-12
51
Human machine interfaces (HMI)
Сензорни тъч терминали (дисплеи)
NB SERIES – The feature-rich, cost-effective HMI
A complete series with comprehensive features
Omron’s new NB HMI series is simply as smart and as dependable as it looks. A feature-rich HMI with Omron’s high quality extending throughout the complete series, this new HMI generation offers you the utmost in reliability. The logical choice for use with Omron’s popular CP1 family
of compact machine controllers, the NB series has just the right model to suit your application, no matter for what branch of industry.
Best-in-class display
Smart design
Saving you time
• LED backlighted TFT LCD
• Wide viewing angle
• More than 65,000 display colours
• Stores up to 120 MBs of screen data
• Portrait or landscape display mode
• Connection to Omron and non-Omron
devices, e.g. PLCs/inverters
• Serial, USB or Ethernet connectivity
• PictBridge printer connection
• USB memory stick support
• Animations and easy-to-use functions
• Multi-language support and tool
• On/off-line simulation
For more information please visit:
industrial.omron.eu/nb
Touch screen
PC based HMI
52
Integrated controller
Display size
Box IPC
Panel IPC
15 inch/
17 inch
12 inch/
15 inch
12.1 inch
10.4 inch
8.4 inch
5.7 inch
15 inch
12.1 inch/
10.4 inch
8.4 inch
DyaloX
DyaloX
NSJ12
NSJ10
NSJ8
NSJ5
NS15
NS12/NS10
NS8
Page 57
Page 57
Page 62
Page 62
Page 64
Page 64
Page 66
Page 66
Page 66
4
HMI
Сензорни тъч терминали (дисплеи)
Interaction type
Function keys
Scalable HMI
Compact HMI
Display size
Display size
4 lines
2 lines
5.7 inch
5.7 inch
10.1 inch
7 inch
5.6 inch
3.5 inch
NS5
NS5
Handheld
NB10W
NB7W
NB5Q
NB3Q
NT11
NT2S
Page 67
Page 68
Page 70
Page 70
Page 70
Page 70
Page 72
Page 73
53
Selection table
Сензорни тъч терминали (дисплеи)
Integrated controller
Model
NSJ12
NSJ10
Display 12.1 inch colour TFT
Resolution 800 × 600 pixels
Control CJ1G-CPU45H;
60k-steps program memory,
128k-words data memory,
logic instruction time 0.04 μs
Communication DeviceNet Master/Slave or
PROFIBUS Master and
Ethernet interface
Expansion (1 board max.) I/O extension
Dimensions in mm (H×W×D) Without expansion unit
241×315×73.3
With expansion unit
241×315×89.3
NSJ8
NSJ5
10.4 inch colour TFT
8.4 inch colour TFT
5.7 inch colour TFT
640 × 480 pixels
640 × 480 pixels
320 × 240 pixels
CJ1G-CPU45H;
60k-steps program memory,
128k-words data memory,
logic instruction time 0.04 μs
CJ1G-CPU45H;
60k-steps program memory,
128k-words data memory,
logic instruction time 0.04 μs
CJ1G-CPU45H;
60k-steps program memory,
128k-words data memory,
logic instruction time 0.04 μs
DeviceNet Master/Slave or
PROFIBUS Master and
Ethernet interface
DeviceNet Master/Slave or
PROFIBUS Master and
Ethernet interface
DeviceNet Master/Slave or
PROFIBUS Master and
Ethernet interface
I/O extension
I/O extension
I/O extension
Without expansion unit
241×315×73.3
With expansion unit
241×315×89.3
Without expansion unit
177×232×73.3
With expansion unit
177×232×89.3
Without expansion unit
142×195×79
With expansion unit
142×195×95
Page 62
64
Scalable HMI
Model
NS15
Display 15 inch TFT colour
NS12
12.1 inch TFT colour
NS10
10.4 inch TFT colour
Resolution 1024 × 768 pixels (XGA) 800 × 600 pixels (SVGA) 640 × 480 pixels (VGA)
Number of colours 256
(32,768 for image data)
Memory Size 60 MB screen memory
Options Controller Link,
Video input board
(NS-CA002)
Dimensions in mm (H×W×D) 300×400×80
Page 66
54
NS8
NS5
8.4 inch TFT colour
5.7 inch TFT colour
NS5 handheld
5.7 inch STN colour
640 × 480 pixels (VGA)
320 × 240 pixels (QVGA) 320 × 240 pixels (QVGA)
256
(32,768 for image data)
256
(32,768 for image data)
256
(32,768 for image data)
256
(32,768 for image data)
256
(4,096 for image data)
60 MB screen memory,
32,768 words +
32,768 bits internal
memory and
8192 words + 8192 bits
retentative memory
60 MB screen memory,
32,768 words +
32,768 bits internal
memory and
8192 words + 8192 bits
retentative memory
60 MB screen memory,
32,768 words +
32,768 bits internal
memory and
8192 words + 8192 bits
retentative memory
60 MB screen memory,
32,768 words +
32,768 bits internal
memory and
8192 words + 8192 bits
retentative memory
60 MB screen memory,
32,768 words +
32,768 bits internal
memory and
8192 words + 8192 bits
retentative memory
Ethernet, Controller
Link,
Video input board
(RGB/Composite)
Ethernet, Controller
Link,
Video input board
(RGB/Composite)
Ethernet, Video input
board (RGB/Composite)
Ethernet
RS-232 or RS-422
communication
depending on cable
241×315×48.5
241×315×48.5
177×195×48.5
142×195×54
176×223×70.5
(excl. emergency
button)
67
68
Human machine interfaces (HMI)
Сензорни тъч терминали (дисплеи)
NB10W
NB7W
Resolution 800 × 480 pixels
Number of colours 65,536
Memory 128 MB (including system area)
Communication ports
Serial 1 × RS-232C &
Communication 1 × RS-232C/422A/485
USB (USB Host only 1 × USB Host & 1 × USB Slave
on TW01 model)
Ethernet 1 × Ethernet
Dimensions in mm (H×W×D) 210.8×268.8×54.0
NB5Q
NB3Q
7 inch Wide TFT LCD
5.6 inch TFT LCD
3.5 inch TFT LCD
800 × 480 pixels
320 × 234 pixels
320 × 240 pixels
65,536
65,536
65,536
128 MB (including system area)
128 MB (including system area)
128 MB (including system area)
1 × RS-232C &
1 × RS-232C/422A/485
1 × RS-232C &
1 × RS-232C/422A/485
1 × RS-232C/422A/485
1 × USB Host & 1 × USB Slave
1 × USB Host & 1 × USB Slave
1 × USB Host & 1 × USB Slave
1 × Ethernet (TW01 model)
1 × Ethernet (TW01 model)
1 × Ethernet (TW01 model)
148×202×46
142×184×46
103.8×129.8×52.8
4
Model
Display 10.1 inch Wide TFT LCD
HMI
Compact HMI
Page 70
Function-key HMI
Model
NT11
Type of Display LED backlight LCD
Number of F-keys 22
Number of characters 20 × 4 lines
NT2S
LED backlight LCD
6 or 20 depending on model
16 × 2 lines
Printer connection Yes
Depending on model
Number of screens 250
65,000 (limited by memory)
Size in mm (H×W×D) 113×218×38.2
Page 72
6 F-keys 60×109×43
20 F-keys 107×107×43
73
55
56
Dyalox
Индустриален промишлен компютър
PC based HMI
The DyaloX Industrial PC is designed to provide exceptional performance operating
around-the-clock throughout its lifetime. Drawing on our many years of experience in
industrial-class standalone PC-based equipment, we have created unique self-diagnostic hardware and software, such as the Omron RAS solution, to ensure that DyaloX
IPCs will keep on running long after other IPCs have given up.
Omron RAS solution
Industrial-grade 600 MHz or 1.3 GHz Intel Celeron CPU
Reliable silicon storage up to 8GB
Fan-less heat sink cooling for enhanced reliability
3 year warranty, 5 year minimum availability, 7 year courier repair service
4
•
•
•
•
•
Ordering information
DyaloX IPC
Type
Industrial PC panel, 600 MHz CPU
Industrial PC panel, 1.3 GHz CPU
Industrial PC box, 1.3 GHz CPU
Order Code
12 inches, 600 MHz, 1 GB internal, black
NSA12-TX12B
12 inches, 600 MHz, 1 GB internal, silver
NSA12-TX12S
15 inches, 600 MHz, 1 GB internal, black
NSA15-TX12B
15 inches, 600 MHz, 1 GB internal, silver
NSA15-TX12S
12 inches, 1.3 GHz, 1 GB internal, 4 GB storage, black
NSA12-TX01B-E
12 inches, 1.3 GHz, 1 GB internal, 4 GB storage, silver
NSA12-TX01S-E
15 inches, 1.3 GHz, 1 GB internal, 4 GB storage, black
NSA15-TX01B-E
15 inches, 1.3 GHz, 1 GB internal, 4 GB storage, silver
NSA15-TX01S-E
1.3 GHz, RAM: 1 GB, storage: 4 GB
NSA-CPU04-E
Touch panel
Type
Touchscreen panel
Order Code
15 inches, black
NSA-TX151B
15 inches, silver
NSA-TX151S
17 inches, black
NSA-TY171B
17 inches, silver
NSA-TY171S
Accessories
Type
Order Code
4 GB CF with XP Embedded English
NSA-CEX04-E
8 GB CF with XP Embedded English
NSA-CEX08-E
16 GB CF with XP Embedded English
NSA-CEX16-E
1 GB DDR-SD RAM (non-ECC)
NSA-MR191
DVI & USB cable 0.1 m
NSA-DU02
DVI & USB cable 2 m
NSA-DU22
DVI & USB cable 5 m
NSA-DU52
DVI cable 10 m
NSA-DV101
Set of 5 Anti-reflection sheets for 12 inches
NS12-KBA04
Set of 5 Anti-reflection sheets for 15 inches
NS15-KBA04
Battery for NSA12/15-TX01, NSA-CPU
NSA-BAT01
Battery for NSA12/15-TX12
NSA-BAT03
HMI
Industrial PC created for 24/7 operation in
the most demanding industrial environments
57
Dyalox
PC based HMI
Индустриален промишлен компютър
DyaloX IPC specifications
Main specifications
Item
NSA1_-TX12
NSA1_-TX01_-E
OS
CF with Windows XP embedded*1
Preinstalled Windows XP embedded
Processor
Storage
device
Memory
Interface
600 MHz Intel Celeron-M Processor
1.3 GHz Intel Celeron-M Processor
Type
Industrial CF memory or HDD*1
DiskOnModule (Flash memory)
Capacity
CF: 4/8 GB (with OS) IDE I/F*1
4 GB
Service life
(write cycles)
CF: 100,000 write cycle/block
NAND flash memory: 100,000 write cycles (to the same block)*2
HDD: 2 years at 24 hours/day operation, 3 years at
8 hours/day operation
Main memory
1 GB DDR-SDRAM (non-ECC)
Cache memory
512 KB Level 2 cache memory (built into the CPU)
Keyboard
–
PS/2 keyboard with 6-pin MINI DIN connector
Mouse
–
PS/2 mouse with MINI DIN connector
Serial ports
2 ports conforming to EIA RS-232C for 9-pin D-SUB male connectors
Ethernet
2 × 10 BASE-T/100 BASE-TX RJ45 connector
USB ports
4 × USB 2.0/1.1 ports for USB type-A connectors. 2 USB 2.0/1.1 ports for USB type-A connectors
(2 on front panel, cable 3 m max.)
Memory Card
1 CF Card slot
Video output
–
Audio
–
2 USB 2.0/1.1 ports for USB type-A connectors
2 USB 1.1 for USB type-A connectors
1 DVI port for DVI-I connector
Line-In/Line-Out/Mic-In for mini jack
Special RAS
board
External input port
3-pin connector port for the UPS power interruption signal
Status LEDindicators
4 (RUN/BATLOW/ERR/DIAG)
Motherboard RAS
functions
1 GB DDR-SDRAM (non-ECC)
One 10 BASE-T/100 BASE-TX port for an RJ45 connector
PCI expansion bus, 1 slot
RAS functions Special RAS board
functions
4 GB
1 GB DDR-SDRAM (non-ECC)
Expansion slots
PCI expansion bus, 2 slots
Alive connection monitoring, device restart, timer start, startup and shutdown monitoring, backlight lit time measurement,
UPS power interrupt signal output, and logging functions
Standard PC RAS info, post error logging, post error retry, CMOS data recovery
POWER LED indicator
Yes (green)
Service life*3
50,000 hours at 40°C
Battery life
NSA-CPU04-E
50,000 hours at 30°C
Main board
5 years at 25°C (NSA-BAT03)
5 years at 25°C (NSA-BAT01)
RAS board
5 years at 25°C (NSA-BAT03)
5 years at 25°C (NSA-BAT01)
*1
*2
Sold separately
Calculate condition
Free area:
500 MB (*excluding OS & Application)
Overwrite data size/time: 0.5 MB/time
Overwrite times/day:
10,000 times/day
MTBF:
(500 MB *100,000 times) / (0.5 MB *10,000 times/day) = 10,000 days = 27 years
*3 The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions.
Touch Panel specifications
Item
NSA12-TX12_-E
Display panel Type
TFT colour LCD
Backlight
Size
12.1 inches
Resolution
1024×768 dots
Brightness
300 cd/m2 (typical)
Viewing angle
130° left to right, 90° up and down
Colours displayed
262,144
Type
2 CCFL
NSA15-TX12_-E
NSA12-TX01_-E
NSA15-TX01_-E
15 inches
12.1 inches
15 inches
4 CCFL
2 CCFL
4 CCFL
185.5×247
229×305
Brightness adjustment Three-level software adjustment*1
Touch panel
Interface
Backlight not lit
detection
The software reads the lamp burnout detection signal from the inverter*2
Service life
50,000 hours min.*3
Type
Analogue resistive type
Effective input area
Size in mm (H×W)
185.5×247
Operating service life
10,000,000 operations (with non-stop key stroking using fingers to input)
100,000 characters (with non-stop character entry using a stylus to input)
USB ports
4 x USB2.0/1.1 for type-A connectors (2 on front side)
Video Input
-
POWER LED indicator
Yes (green)
Service life*4
50,000 hours at 25°C
*1
*2
*3
229×305
2 x USB2.0/1.1 for type-A connectors
50,000 hours at 40°C
The contrast cannot be adjusted significantly.
It is not the service life, but rather lamp failure due to hardware problems such as a broken wire that is detected. Backlight not lit detection means both backlight lamps have burnt out.
The service life is a guideline for maximum contrast at room temperature with normal humidity and is provided strictly for reference. It varies significantly with the ambient temperature.
The service life will be shorter under extreme (high or low) temperature conditions and falls off sharply particularly under low-temperature conditions.
*4 The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions.
58
Dyalox
PC based HMI
Индустриален промишлен компютър
General specifications
Item
NSA1_-TX12_-E
Rated supply voltage
24 VDC
NSA1_-TX01_-E
NSA-CPU0_-E
Allowable supply voltage range
20.4 VDC to 27.6 VDC (24 VDC ±15%)
20.0 VDC to 27.6 VDC (24 VDC ±15%)
Power consumption
12 inches: 65 W max.
15 inches: 75 W max.
12 inches: 80 W max.
15 inches: 100 W max.
60 W max.
*1
0 to 50°C
Ambient storage temperature
-10 to 60°C*1
Ambient operating humidity
10% to 80% with no condensation*1
Ambient storage humidity
10% to 85% with no condensation*1
Operating atmosphere
Must be free of corrosive gases.
Must be fairly dust free.
Noise resistance
Conforms to IEC6100-4-4, power supply line: 2 kV
Vibration resistance (in operation)
Conforms to JIS C0041, 0.05 mm amplitude at 10 to 55 Hz for 50 min. Each in the X, Y, and Z directions
Shock resistance (in operation)
Conforms to JIS C0041, 196 m/s2 three times each in the X, Y, and Z directions
Degree of protection
Front panel: IP65 or the equivalent*1
Weight
12 inches: 5 kg max.
15 inches: 7 kg max.
12 inches: 5 kg max.
15 inches: 7 kg max.
4 kg max.
Dimensions in mm (HxWxD)
12 inches:
281×342×98
15 inches: 296.5×397.5×103
12 inches: 264×322×100
15 inches: 312×384×108
233x308x76.5
*1
4
HMI
Ambient operating temperature
–
For more information, please check the user manual.
CF & HDD
Item
NSA-CEX04
NSA-CEX08
Storage capacity
4 GB
8 GB
Touch panel specifications (box model)
Item
NSA-TX151
Display panel Type
TFT colour LCD
Backlight
NSA-TY171
Size
15.0 inches
17.0 inches
Resolution
1024×768 dots
1280×1024 dots
Brightness
270 cd/m2 (typical)
200 cd/m2 (typical)
Viewing angle
130° left to right, 90° up and down
Colours displayed
262,144
Type
2 CCFL
4 CCFL
Brightness adjustment 10 level adjustment by rotary switch
Touch panel
Interface
Service life
50,000 hours min.*1
Type
Analogue resistive type
Effective input area
Size in mm (H×W)
229×305
Operating service life
10,000,000 operations (with non-stop key stroking using fingers to input)
100,000 characters (with non-stop character entry using a stylus to input)
USB ports
3 x USB 1.1 for type-A connectors (2 on front side)
1 x USB 1.1 (used for touch) for type-B connector
Video Input
1 x DVI-D port
POWER LED indicator
Yes (green)
Service life*2
50,000 hours at 30°C
272×340
*1
The service life is a guideline for maximum contrast at room temperature with normal humidity and is provided strictly for reference. It varies significantly with the ambient temperature.
The service life will be shorter under extreme (high or low) temperature conditions and falls off sharply particularly under low-temperature conditions.
*2
The service life is a guideline that is provided strictly for reference. It varies with factors such as the installation location and operating conditions.
General specifications (box model)
Item
NSA-TX151
Rated supply voltage
24 VDC
Allowable supply voltage range
20.0 VDC to 27.6 VDC (24 VDC ±15%)
Power consumption
40 W max.
Ambient operating temperature
0 to 50°C*1
Ambient storage temperature
-10 to 60°C*1
Ambient operating humidity
10% to 80% with no condensation*1
Ambient storage humidity
10% to 85% with no condensation*1
Operating atmosphere
Must be free of corrosive gases.
Must be fairly dust free.
Noise resistance
Conforms to IEC6100-4-4, power supply line: 2 kV
Vibration resistance (in operation)
Conforms to JIS C0041, 0.05 mm amplitude at 10 to 55 Hz for 50 min. Each in the X, Y, and Z directions
Shock resistance (in operation)
Conforms to JIS C0041, 196 m/s2 three times each in the X, Y, and Z directions
Degree of protection
IP65F (front panel oil protection)*1
Weight
6 kg max.
7 kg max.
Dimensions in mm (HxWxD)
328x404x57
371x436x57
*1
NSA-TY171
55 W max.
For more information, please check the user manual.
59
60
Human machine interfaces (HMI)
HMI-Connection
System configuration
(Picture represents backside of a SYSMAC One unit)
Memory card interface
(Display part)
Memory card interface
(Controller part)
CF
HMI
For application back up and
saving PLC data, etc.
RS-232C
Port C
DeviceNet or
PROFIBUS
CF
For screen captures, recipes and
saving data log, etc.
4
Available both on NS and SYSMAC One series
Only available on SYSMAC One series
DeviceNet
PROFIBUS
RS-232C port B
RS-232C port A
Ethernet
USB slave
Only available on NS series
Printer
PC
RS-232C, DOS/V transfer cable
XW2Z-S002 (2m)
RS-422A/485 conversion unit
CJ1W-CIF11 (~50m)
NS-AL002 (~500m)
PictBridge technology
PC
General purpose USB cable
PLC
PLC
USB serial conversion cable
CS1W-CIF31
Barcode reader
Serial
WE70
Wireless
Printer
Serial
RS-422A/485 conversion unit
CJ1W-CIF11
NS-AL002
PC
Temperature controller
E5_C, E5_N, EJ1, etc.
PLC
RS-232C, PT-PLC connection cable
XW2Z-200T (2m)
XW2Z-500T (5m)
Barcode reader
PC
I/O terminals
RS-232C, DOS/V transfer cable
XW2Z-S002 (2m)
USB, serial conversion cable
CS1W-CIF31
Inverters
Memory link, single board Computer, etc.
Temperature controller, E5_N, EJ1, etc.
GRT1 series
SmartSlice I/O
CompoWay/F(direct serial connection to HMI)
Inverter
RS-422A/485
Other company´s equipments
non-Omron device
61
NSJ12/NSJ10
Integrated controller
HMI with integrated PLC and Network
interface
The NSJ12 and NSJ10 are combined with a CJ1G-CPU 45H and a DeviceNet or PROFIBUS interface fitted into a compact housing occupying less panel space than the
separate products. Programming can be done via the standard high-speed USB port.
The SYSMAC One is completely transparent, so the PLC, network (including field devices) and HMI can be accessed via a single port. A great advantage when
servicing your machine remotely.
•
•
•
•
•
HMI + PLC with 2 separate CPUs for greater performance and reliability
Transparent architecture for easy remote maintenance
Compact design occupying less panel space
Flexible and cost-effective solution with multiple screen sizes, CPUs & networks
Smart Active Parts for graphical interaction to field devices
Ordering Information
Type
Order Code
SYSMAC One 12.1" TFT
SYSMAC One 10" TFT
CJ1G-CPU45H
CJ1G-CPU45H
PROFIBUS
PROFIBUS
with Ethernet
with Ethernet
Black
NSJ12-TS01B-G5P
Ivory
NSJ12-TS01-G5P
Black
NSJ10-TV01B-G5P
Ivory
NSJ10-TV01-G5P
Type
Order Code
SYSMAC One 12.1" TFT
SYSMAC One 10" TFT
CJ1G-CPU45H
CJ1G-CPU45H
DeviceNet
DeviceNet
with Ethernet
with Ethernet
Black
NSJ12-TS01B-G5D
Ivory
NSJ12-TS01-G5D
Black
NSJ10-TV01B-G5D
Ivory
NSJ10-TV01-G5D
Note: For the accessories, please refer to page 69
Specifications
Item
NSJ12-TS01-G5D
Supply voltage
24 VDC
Allowable supply voltage range
20.4 to 27.6 VDC (24 VDC ±15%)
Power consumption
30 W max.
Current consumption
Controller Section Internal 5 V: 500 mA max.
DeviceNet Section Internal 5 V: 200 mA max., External 24 V: 18 mA max.
Inrush current *1
At 24 VDC: 10 A/20 ms max. for cold start at room temperature
Ambient operating temperature
(depending on angle of display surface off horizontal) *2
90° to 60°: 0 to 50°C
60° to 30°: 0 to 45°C
30° to 0°: Use prohibited
Ambient storage temperature
-20 to 60°C
Ambient operating humidity
0 to 40°C: 35% to 85% (with no condensation)
40 to 50°C: 35% to 60% (with no condensation)
Ambient operating environment
No corrosive gases
Insulation resistance
20 M min. (at 100 VDC) between DC external and GR terminals
Dielectric strength
800 VDC for 1 min between DC external and GR terminals, leakage current: 10 mA max.
Noise immunity
2 kV on power supply line (conforming to IEC 61000-4-4)
Vibration resistance (during operation)
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y and Z directions for 80 minutes
Shock resistance (during operation)
147 m/s2, 3 times each in X, Y and Z directions
External
dimensions in
mm (W×H×D)
Without Expansion unit
315x241x73.3
With Expansion unit
315x241x89.3
Panel output dimensions
302+10×228+10 mm (W×H)
Panel thickness: 1.6 to 4.8
Grounding
100 or less
Weight
2.7 kg max.
Degree of protection
Front operating panel: Equivalent to IP65F and NEMA4*3
62
NSJ10-TV01-G5D
2.5 kg max.
NSJ12/NSJ10
Integrated controller
Item
NSJ12-TS01-G5D
Battery life
5 years (at 25°C)
The SRAM and RTC will be backed up for 5 days after the battery runs low (i.e., after the indicator lights orange). The SRAM and RTC
will be backed up by a super capacitor for 5 minutes after removing the old battery (i.e., after turning ON power after 5 minutes).
NSJ10-TV01-G5D
International standards
Conforms to cULus and EC Directives.
A delay circuit that charges a capacitor is used to limit the inrush current. If a hot start is performed when the power supply has been OFF only a short period of time, the capacitor will still
be charged and the inrush current specified above will be exceeded by up to approximately five times the specified value. When selecting fuses or breakers for external circuits, allow sufficient
margin in the melting temperatures, detection characteristics, and inrush current.
*2
Display angles off horizontal are as follows:
90°
30°
4
D
e
ac
urf
ys
la
isp
Horizontal 0°
*3
HMI
*1
May not be applicable in locations with long-term exposure to oil.
63
NSJ8/NSJ5
Integrated controller
HMI with integrated PLC and Network
interface
The NSJ8 and NSJ5 are combined with a CJ1G-CPU 45H PLC and a DeviceNet or
PROFIBUS interface. It is fitted into a compact housing occupying less panel space
than the separate products. Programming can be done via the standard high-speed
USB port. The SYSMAC One is completely transparent, so the PLC, network (including
field devices) and HMI can be accessed via a single port. A great advantage when
servicing your machine remotely.
•
•
•
•
•
HMI + PLC with 2 separate CPUs for greater performance and reliability
Transparent architecture for easy remote maintenance
Compact design taking up less panel space
Flexible and cost effective solution with multiple screen sizes, CPUs & networks
Smart Active Parts for graphical interaction to field devices
Ordering Information
Type
Order Code
SYSMAC One 8.4" TFT
SYSMAC One 5.7" TFT
CJ1G-CPU45H
CJ1G-CPU45H
PROFIBUS
PROFIBUS
with Ethernet
with Ethernet
Black
NSJ8-TV01B-G5P
Ivory
NSJ8-TV01-G5P
Black
NSJ5-TQ11B-G5P
Ivory
NSJ5-TQ11-G5P
Type
Order Code
SYSMAC One 8.4" TFT
SYSMAC One 5.7" TFT
CJ1G-CPU45H
CJ1G-CPU45H
DeviceNet
DeviceNet
with Ethernet
with Ethernet
Function
CJ1G-CPU45H
UM capacity
60K steps
I/O
1,280 points
Extended data memory
32K words × 3 banks
EM file memory
Yes
Maximum number of Expansion Racks
3
FB program memory capacity
1024 KB
Maximum number of FB definitions
1,024
Maximum number of FB instances
2,048
Variable table sizes
Note: For the accessories, please refer to page 69
128 KB
Black
NSJ8-TV01B-G5D
Ivory
NSJ8-TV01-G5D
Black
NSJ5-TQ11B-G5D
Ivory
NSJ5-TQ11-G5D
Specifications
Item
NSJ8-TV01-G5D
Supply voltage
24 VDC
Allowable supply voltage range
20.4 to 27.6 VDC (24 VDC ±15%)
Power consumption
30 W max.
Current consumption
Controller Section Internal 5 V: 500 mA max.
DeviceNet Section Internal 5 V: 200 mA max., External 24 V: 18 mA max.
Inrush current *1
At 24 VDC: 10 A/20 ms max. for cold start at room temperature
Ambient operating temperature
(depending on angle of display surface off horizontal) *2
90° to 60°: 0 to 50°C
60° to 30°: 0 to 45°C
30° to 0°: Use prohibited
Ambient storage temperature
-20 to 60°C
Ambient operating humidity
0 to 40°C: 35% to 85% (with no condensation)
40 to 50°C: 35% to 60% (with no condensation)
Ambient operating environment
No corrosive gases
Insulation resistance
20 M min. (at 100 VDC) between DC external and GR terminals
Dielectric strength
800 VDC for 1 min between DC external and GR terminals, leakage current: 10 mA max.
Noise immunity
2 kV on power supply line (conforming to IEC 61000-4-4)
Vibration resistance (during operation)
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y and Z directions for 80 minutes
Shock resistance (during operation)
147 m/s2, 3 times each in X, Y and Z directions
External
dimensions in
mm (W×H×D)
Without Expansion unit
232×177×73.3
195×142×79
With Expansion unit
232×177×89.3
195×142×95
Panel output dimensions
220.5+0.500×165.5+0.500 mm (W×H)
Panel thickness: 1.6 to 4.8
184+0.500×131+0.500 mm (W×H)
Panel thickness: 1.6 to 4.8
Grounding
100 or less
Weight
2.0 kg max.
Degree of protection
Front operating panel: Equivalent to IP65F and NEMA4*3
64
NSJ5-TQ11-G5D
SQ0_: 21 W max.
TQ0_: 22 W max.
90° to 30°: 0 to 50°C
30° to 0°: 0 to 40°C
1.1 kg max.
NSJ8/NSJ5
Integrated controller
Item
NSJ8-TV01-G5D
Battery life
5 years (at 25°C)
The SRAM and RTC will be backed up for 5 days after the battery runs low (i.e., after the indicator lights orange). The SRAM and RTC
will be backed up by a super capacitor for 5 minutes after removing the old battery (i.e., after turning ON power after 5 minutes).
NSJ5-TQ11-G5D
International standards
Conforms to cULus and EC Directives.
A delay circuit that charges a capacitor is used to limit the inrush current. If a hot start is performed when the power supply has been OFF only a short period of time, the capacitor will still
be charged and the inrush current specified above will be exceeded by up to approximately five times the specified value. When selecting fuses or breakers for external circuits, allow sufficient
margin in the melting temperatures, detection characteristics, and inrush current.
*2
Display angles off horizontal are as follows:
90°
30°
4
D
e
ac
urf
ys
la
isp
Horizontal 0°
*3
HMI
*1
May not be applicable in locations with long-term exposure to oil.
65
NS15/NS12/NS10/NS8
Scalable HMI
One-touch machine management
The NS-series is our advanced HMI series that covers a large range from
5.7" Monochrome STN to 15" TFT. Easily programmed it offers advanced features
like, multiple communication possibilities, good synergy with our PLC's and other
devices with Ladder monitor, Smart Active Parts and proven reliability.
•
•
•
•
•
•
Perfect clarity and fast switching screens
Extremely long backlight life (up to 50,000 hours)
Support all European languages, Asian and Cyrillic
Easy data logging on compact flash
Large Memory size (60 MB)
Support for several non-Omron PLC's
Ordering information
Type
TFT, 15", 1024 x 768 pixels
TFT, 12", 800 x 600 pixels
Order Code
with Ethernet
no Ethernet
with Ethernet
TFT, 10", 640 x 480 pixels
no Ethernet
with Ethernet
TFT, 8.4", 640 x 480 pixels
no Ethernet
with Ethernet
Black
NS15-TX01B-V2
Silver
NS15-TX01S-V2
Black
NS12-TS00B-V2
Ivory
NS12-TS00-V2
Black
NS12-TS01B-V2
Ivory
NS12-TS01-V2
Black
NS10-TV00B-V2
Ivory
NS10-TV00-V2
Black
NS10-TV01B-V2
Ivory
NS10-TV01-V2
Black
NS8-TV00B-V2
Ivory
NS8-TV00-V2
Black
NS8-TV01B-V2
Ivory
NS8-TV01-V2
Note: For the accessories, please refer to page 69
Specifications
Item
NS15
NS12
NS10
NS8
Display type
15 inch colour TFT
12 inch colour TFT
10 inch colour TFT
8 inch colour TFT
Display resolution
1024×768 (XGA)
800×600 (SVGA)
640×480 (VGA)
Number of colours
256 (32.768 for image data)
Backlight
2×CCFL
Backlight lifetime
Min. 50000 hours
View angle
Left/right ±85°, Top 70°, Bottom 80° Left/right ±60°, Top 45°, Bottom 75° Left/right ±60°, Top 35°, Bottom 65° Left/right ±65°, Top 50°, Bottom 60°
Touch panel
Analogue resistive touch
Matrix resistive touch
Number of functional keys
3
–
Dimensions in mm (H×W×D)
304×405×75.8
241×315×48.5
177×232×48.5
Weight
4.2 kg max.
2.5 kg max.
2.0 kg max.
Screen data capacity
60 MB
Internal memory
Bit memory: 32,767 bits, Word memory: 32,767 words, Retentative memory: 8,192 bits and 8,192 words.
Memory card interface
1 slot ATA Compact Flash card
Printer connection
PictBridge support
Serial (COM1)
1×RS-232
Serial (COM2)
1×RS-232/422/485
USB Slave
For programming & printing
Ethernet
IEEE 802.3u 10Base-T/100Base-TX
Expansion module
Optional network/video unit
Line voltage
24 VDC ±15%
Power consumption
45 W max.
Battery
CJ1W-BAT01
Battery lifetime
5 years (at 25°C)
Enclosure rating (front side)
IP65F (equivalent to NEMA4)
Obtained standards
UL 1604 Class 1 Diff. 2, cUL, CE, Lloyds, DNV
Operating environment
No corrosive gases
Noise immunity
Conforms to IEC61000-4-4, 2 KV (power lines)
Ambient operating temperature
0 to 50°C*1
Ambient operating humidity
35% to 85% (0 to 40°C) with no condensation, 35% to 60% (40 to 50°C) with no condensation
*1
66
see manual for details.
1×LED
1×RS-232
Optional video unit
25 W max.
NS5
Scalable HMI
The smallest NS HMI is available in two brightness variations, both with a vivid color
TFT touchscreen. It is equipped with a USB connection for project download/upload
and the possibility to communicate over Ethernet. One great advantage with the NS
is that you can make use of Omron’s unique Smart Active Parts (SAP) that save you
time when configuring, commissioning and maintaining your machine. SAP are preprogrammed, pre-tested visualisation objects with embedded communication code,
bringing 'drag and drop' simplicity to HMI design.
Perfect clarity and fast switching screens
Extremely long backlight life (up to 75,000 hours)
Support all European languages, Asian and Cyrillic
Easy data logging on compact flash
Large Memory size (60 MB)
Support for several non-Omron PLC’s
4
•
•
•
•
•
•
Ordering information
Type
NS5-TQ
Order Code
TFT, 5.7'', 320×240 pixels
no Ethernet
with Ethernet
NS5-SQ
TFT, 5.7'', 320×240 pixels
no Ethernet
with Ethernet
Black
NS5-TQ10B-V2
Ivory
NS5-TQ10-V2
Black
NS5-TQ11B-V2
Ivory
NS5-TQ11-V2
Black
NS5-SQ10B-V2
Ivory
NS5-SQ10-V2
Black
NS5-SQ11B-V2
Ivory
NS5-SQ11-V2
Note: For the accessories, please refer to page 69
Specifications
Item
NS5-TQ
Display type
5.7 inch colour TFT
Display resolution
340×240 (QVGA)
Number of colours
256 (32.768 for image data)
Backlight
LED
Backlight lifetime
Min. 75000 hours
View angle
Left/right ±80°, Top 80°, Bottom 60°
Touch panel
Matrix resistive touch
Number of functional keys
–
Dimensions in mm (H×W×D)
142×195×54
Weight
1.0 kg max.
Screen data capacity
60 MB
Internal memory
Bit memory: 32,767 bits, Word memory: 32,767 words, Retentative memory: 8,192 bits and 8,192 words.
Memory card interface
1 slot ATA Compact Flash card
Printer connection
PictBridge support
Serial (COM1)
1×RS-232
Serial (COM2)
1×RS-232
USB Slave
For programming & printing
Ethernet
IEEE 802.3u 10Base-T/100Base-TX
Expansion module
–
Line voltage
24 VDC ±15%
Power consumption
15 W max.
Battery
CJ1W-BAT01
Battery lifetime
5 years (at 25°C)
Enclosure rating (front side)
IP65F (equivalent to NEMA4)
Obtained standards
UL 1604 Class 1 Diff. 2, cUL, CE, Lloyds, DNV
Operating environment
No corrosive gases
Noise immunity
Conforms to IEC61000-4-4, 2 KV (power lines)
Ambient operating temperature
0 to 50°C*1
Ambient operating humidity
35% to 85% (0 to 40°C) with no condensation, 35% to 60% (40 to 50°C) with no condensation
*1
HMI
More power, smaller size
NS5-SQ
See manual for details.
67
NS5 handheld
Scalable HMI
NS5 handheld, suitable for use in harsh
conditions
The NS series has evolved into a mobile format. Based on the standard 5.7” TFT
colour version, we can offer a handheld version of the NS series. Offering 10 Function
keys for the most used functions and with a protection degree of IP65 it is the product
to use in harsh environment where freedom of movement is needed.
•
•
•
•
10 Function keys, 4 hardwired for inching
Emergency switch on front plus enable switch on back of unit
Well protected against water, IP65
Compact Flash, Serial and USB interface
Ordering information
Type
NSH5
Order code
TFT, 5.7", 320×240 pixels
Black
NSH5-SQR10B-V2
Accessories
Type
Order code
Bracket NS handheld protecting emergency button from accidental activation
NSH5-ATT01
Bracket NS handheld for wall mounting
NSH5-ATT02
Cable NS handheld, RS-422, 10m UL
NSH5-422UL-10M
Cable NS handheld, RS-232, 10m UL
NSH5-232UL-10M
Cable NS handheld, RS-232, 3m UL
NSH5-232UL-3M
Specifications
Memory card interface
1 slot ATA Compact Flash card
Serial (COM1)
1×RS-232/RS-422A
USB Slave
For programming
Line voltage
24 VDC ±15%
Power consumption
10 W max.
Battery
CJ1W-BAT01
Battery lifetime
5 years (at 25°C)
Enclosure rating
IP65*1
Obtained standards
UL 1604 Class 1 Diff. 2, cUL, CE, NEMA equivalent
Operating environment
No corrosive gases
Noise immunity
Conforming to IEC 61000-4-4: 2 kV (power supply line)
Ambient operating temperature
0 to 40°C
Ambient operating humidity
35% to 85% max. (with no condensation)
Vibration resistance (during operation)
10 to 57 Hz with amplitude of 0.075 mm, 57 to 150 Hz with acceleration of 9.8 m/s2 three minutes each in X, Y, and Z directions
Shock resistance (during operation)
147 m/s2 three times each in X, Y, and Z directions
Drop test*1
Dropped from 1 m. Conforming to JIS B 3502/IEC61131-2
*1
68
see manual for details.
Accessories NSJ/NS
Integrated controller/Scalable HMI
Ordering information
Type
Description
Order code
Cable
Serial programming cable
XW2Z-S002
CP1W-CN221
PT-to-PLC
Connecting Cable
PT connection: 9 pins
PLC connection: 9 pins
Length: 2 m
XW2Z-200T
Length: 5 m
XW2Z-500T
Accessories
Video input
Inputs: 4 channels NTSC / PAL
NS-CA001
Inputs: 2 channels NTSC / PAL, 1 channel RGB
NS-CA002
Cable to connect NS-CA00_ to Video console unit
HMI
USB programming cable, 2 m
F150-VKP (2 m)
NS-CLK21
RS-422A/485 adapter (50 m)
CJ1W-CIF11
RS-422A adapter (500 m)
Anti-reflection sheets (5 sheets)
NS-AL002
NS15
NS15-KBA04
NS12/10
NS12-KBA04
NS8
NS7-KBA04
NS5
NT30-KBA04
NS12/10
NS12-KBA05
NS8
NS7-KBA05
NS5
NT31C-KBA05
NS15 (1 cover)
NS15-KBA05N
NS12/10
NS12-KBA05N
NS8
NS7-KBA05N
NS5
NT31C-KBA05N
Chemical-resistant cover (1 cover)
NS5
NT30-KBA01
Attachment adapter
(NT625C/631/631C series to NS12 series)
NS12-ATT01
(NT625C/631/631C series to NS12 series) Black
NS12-ATT01B
(NT620S/620C/600S series to NS8 series)
NS8-ATT01
(NT600M/600G/610G/612G series to NS8 series)
NS8-ATT02
128 MB
HMC-EF183
256 MB
HMC-EF283
512 MB
HMC-EF583
Anti-reflection protective covers (5 pack)
Transparent protective covers (5 pack)
Memory card
4
F150-VKP (5 m)
Controller link interface unit
Memory card adapter for PC
HMC-AP001
Battery
CJ1W-BAT01
69
NB series
Компактен сензорен тъч терминал
Compact HMI
The feature-rich, cost-effective HMI
The combination of high quality and rich features add up to give outstanding value for
an HMI in the economy class. The NB-Designer software to create your HMI application is free of charge and can be downloaded from our website.
•
•
•
•
•
•
•
More than 65,000 display colors TFT touch screen
Available in sizes ranging from 3.5 to 10 inches
Long-life LED backlight
Serial, USB or Ethernet communication
USB memory stick support (TW01 model only)
128 MB internal memory
Vector and bitmap graphics
Ordering information
HMI panels
Product name
Specifications
Order code
NB3Q
3.5 inch, TFT LCD, Color, 320 ×240 dots
NB3Q-TW00B
3.5 inch, TFT LCD, Color, 320 ×240 dots, USB Host, Ethernet
NB3Q-TW01B
5.6 inch, TFT LCD, Color, 320 ×234 dots
NB5Q-TW00B
5.6 inch, TFT LCD, Color, 320 ×234 dots, USB Host, Ethernet
NB5Q-TW01B
7 inch, TFT LCD, Color, 800 ×480 dots
NB7W-TW00B
7 inch, TFT LCD, Color, 800 ×480 dots, USB Host, Ethernet
NB7W-TW01B
10.1 inch, TFT LCD, Color, 800 ×480 dots, USB Host, Ethernet
NB10W-TW01B
Product item
Specifications
Order code
NB-to-PLC Connecting cable
For NB to PLC via RS-232C (CP/CJ/CS), 2m
XW2Z-200T
For NB to PLC via RS-232C (CP/CJ/CS), 5m
XW2Z-500T
For NB to PLC via RS-422A/485, 2m
NB-RSEXT-2M
Software
Supported Operating Systems: Windows 7, Windows Vista®, Windows XP*1 (SP1 or higher).
Download from the Omron website.
NB-Designer*2
Display protective sheets
For the NB3Q contains 5 sheets
NB3Q-KBA04
For the NB5Q contains 5 sheets
NB5Q-KBA04
For the NB7W contains 5 sheets
NB7W-KBA04
For the NB10W contains 5 sheets
NB10W-KBA04
Mounting bracket for NT31/NT31C series to NB5Q series
NB5Q-ATT01
NB5Q
NB7W
NB10W
Options
Attachment
*1
*2
Except for Windows XP 64-bit version
The NB5Q-TW01B and NB7W-TW01B are supported by NB-Designer version 1.10 or higher.
The NB3Q-TW0_B and NB10W-TW01B are supported by NB-Designer version 1.20 or higher.
Model
Panel cutout (H × V mm)
NB3Q
119.0 (+0.5/–0) × 93.0 (+0.5/–0)
NB5Q
172.4 (+0.5/–0) × 131.0 (+0.5/–0)
NB7W
191.0 (+0.5/–0) × 137.0 (+0.5/–0)
NB10W
258.0 (+0.5/–0) × 200.0 (+0.5/–0)
Note: Applicable panel thickness: 1.6 to 4.8 mm.
70
NB series
Compact HMI
Компактен сензорен тъч терминал
Specifications
HMI
Specifications
NB3Q
TW00B
NB5Q
TW01B
NB7W
TW00B
TW01B
TW00B
NB10W
TW01B
TW01B
3.5 inch TFT LCD
5.6 inch TFT LCD
7 inch TFT LCD
10.1 inch TFT LCD
Display resolution (H×V)
320×240
320×234
800×480
800×480
Number of colors
65,536
Backlight
LED
Backlight lifetime
50,000 hours of operating time at the normal temperature (25C)*1
Touch panel
Analog resistive membrane, resolution 1024×1024, life: 1 million touch operations
Dimensions in mm (H×W×D)
103.8×129.8×52.8
Weight
310 g max.
*1
148×202×46
620 g max.
625 g max.
710 g max.
210.8×268.8×54.0
715 g max.
4
142×184×46
315 g max.
HMI
Display type
1,545 g max.
This is the estimated time when the luminous intensity is decreased by 50% per LED at room temperature and humidity. It is a typical value.
Functionality
Specifications
NB3Q
TW00B
NB5Q
TW01B
NB7W
TW01B
TW00B
TW01B
TW01B
–
USB
Memory
–
USB
Memory
USB
Memory
10/100 base-T
10/100 base-T
Internal memory
128MB (including system area)
Memory interface
–
Serial (COM1)
RS-232C/422A/485 (not isolated),
Transmission distance:
15m Max. (RS-232C),
500m Max. (RS-422A/485),
Connector: D-Sub 9-pin
RS-232C,
Transmission distance: 15 m Max.,
Connector: D-Sub 9-pin
Serial (COM2)
–
RS-232C/422A/485 (not isolated),
Transmission distance: 15m Max. (RS-232C),
500m Max. (RS-422A/485),
Connector: D-Sub 9-pin
USB Host
Equivalent to USB 2.0 full speed, type A, Output power 5V, 150mA
USB Slave
Equivalent to USB 2.0 full speed, type B, Transmission distance: 5m
Printer connection
PictBridge support
Ethernet
–
USB
Memory
10/100 base-T
NB10W
TW00B
–
10/100 base-T
–
General
Specifications
NB3Q
TW00B
NB5Q
TW01B
NB7W
TW01B
TW00B
TW01B
TW01B
6W
10 W
7W
11 W
14 W
Line voltage
20.4 to 27.6 VDC (24 VDC –15 to 15%)
Power consumption
5W
Battery lifetime
5 years (at 25C)
Enclosure rating (front side)
Front operation part: IP65 (Dust proof and drip proof only from the front of the panel)
Obtained standards
EC Directives, KC, cUL508
Operating environment
No corrosive gases.
Noise immunity
Compliant with IEC61000-4-4, 2KV (Power cable)
Ambient operating temperature
0 to 50C
Ambient operating humidity
10% to 90% RH (without condensation)
9W
NB10W
TW00B
Applicable Controllers
Brand
Series
Brand
Series
OMRON
Omron C Series Host Link
Schneider
Schneider Modicon Uni-TelWay
Omron CJ/CS Series Host Link
Mitsubishi
Schneider Twido Modbus RTU
Omron CP Series
Delta
Delta DVP
Mitsubishi Q_QnA (Link Port)
LG (LS)
LS Master-K Cnet
Mitsubishi FX-485ADP/485BD/422BD (Multi-station)
LS Master-K CPU Direct
Mitsubishi FX0N/1N/2N/3G
LS Master-K Modbus RTU
Mitsubishi FX1S
LS XGT CPU Direct
Mitsubishi FX2N-10GM/20GM
LS XGT Cnet
Mitsubishi Q series (CPU Port)
GE Fanuc Automation*1 GE Fanuc Series SNP
GE SNP-X
Mitsubishi Q00J (CPU Port)
Modbus
Mitsubishi FX3U
Modbus ASCII
Mitsubishi Q06H
Modbus RTU
Panasonic
FP series
Modbus RTU Slave
Siemens
Siemens S7-200
Modbus RTU Extend
Siemens S7-300/400 (PC Adapter Direct)
Modbus TCP
Allen-Bradley*1
(Rockwell)
*1
AB DF1
AB CompactLogix/ControlLogix
AB and GE will be supported by NB-Designer version 1.20 or higher.
Note: For details, refer to NB Series Host Connection Manual (Cat.No V108).
71
NT11
Function-key HMI
HMI with four text lines and 22 F-keys
The NT11 is a Function key HMI with four text lines that can each hold up to
20 characters. It has a parallel printer connection next to a serial port for connection
to a PLC. It has a LED backlight that has a life expectancy of at least 50,000 hours.
•
•
•
•
•
Easy programming software.
Small size and installation depth.
Customisable F-Keys
Printer connection.
Cost effective solution.
Ordering information
Type
STN monochrome
Order code
Ten-key type
Ivory
NT11-SF121-EV1
Black
NT11-SF121B-EV1
Accessories
Type
Description
Cables
For screen transfer
For PLC connection
Order code
XW2Z-S002
PT: 9-pin
PLC: 9-pin
Cable length: 2 m
XW2Z-200T
Cable length: 5 m
XW2Z-500T
PT: 9-pin
PLC: Mini-peripheral
Cable length: 2 m
NT-CN221
Software
Type
Order code
NTST Version 4.8
NTZJCAT1EV4
Upgrade NTST Version 4.8
NTZJCAT1EV4S
Specifications
Size in mm (HxWxD)
113×218×38.2
Effective display area
100×40mm (160×64 pixels)
Line voltage
24 VDC ±15%
Function keys
22 keys
Touch panel
–
Obtained standards
CE, cULus
No. of display characters
(standard characters)
20 characters × 4 lines
No. of registered screens
250
Screen data capacity (standard)
32 KB
Expansion memory
–
Memory card interface
–
Printer connection
Supported
Backlight life
50,000 hours average
72
NT2S
Function-key HMI
HMI with two text lines, 6 or 20 F-keys
and up to two serial ports
The NT2S is the smallest HMI that we can offer you. It is based on a 16 × 2 lines
LCD display with 6 or 20 Function keys. It offers IP65 protection, an optional RTC and
printer connection.
HMI
Easy and free programming software.
Small size and installation depth.
Real Time Clock (depending on model).
Printer connection (depending on model).
Cost effective solution.
4
•
•
•
•
•
Ordering information
Type
STN monochrome
Order code
Programmable
6-key type, Black
NT2S-SF121B-EV2
NT2S-SF122B-EV2
PLC controlled
Programmable
NT2S-SF123B-EV2
20-key type, Black
NT2S-SF125B-E
NT2S-SF126B-E
PLC controlled
NT2S-SF127B-E
Type
Description
Order code
NT2S-SF121/125 and NT3S
peripheral port CPM series except CPM2C, 2 m
NT2S-CN212-V1
NT2S-SF121/125 and NT3S
peripheral port CPM series except CPM2C, 5 m
NT2S-CN215-V1
NT2S-SF122/SF123/SF126/SF127
peripheral port CPM series except CPM2C, 2 m
NT2S-CN222-V1
NT2S-SF122/SF123/SF126/SF127
peripheral port CPM series except CPM2C, 5 m
NT2S-CN225-V2
NT2S-SF121/125 and NT3S
mini-peripheral port CJ1/CS1 and CPM2C series, 2 m
NT2S-CN223-V2
NT2S-SF122/SF123/SF126/SF127
mini-peripheral port CJ1/CS1 and CPM2C series, 2 m
NT2S-CN224-V1
NT2S-SF121/125 and NT3S
serial port CJ1/CS1/CP1/CPM2/CQM1(H), 2 m
NT2S-CN232-V1
NT2S-SF121/125 and NT3S
serial port CJ1/CS1/CP1/CPM2/CQM1(H), 5 m
NT2S-CN235-V1
NT2S-SF122/SF126
serial port CJ1/CS1/CP1/CPM2/CQM1(H), 2 m
NT2S-CN242-V1
All NT2S and NT3S models
serial programming cable, 2 m
NT2S-CN002
Accessories
Software
Type
Order code
This software is provided free of charge and features Windows fonts, a Multi language import/export utility, a character map to design your own characters
and can be used to place bitmaps in your application.
NTXS
Specifications
Size in mm (H×W×D)
60×109×43 (6 F-keys), 107×107×43 (20 F-keys)
Effective display area
56×11 mm
Line voltage
24 VDC ±10%
Touch panel
–
Obtained standards
CE, cULus
No. of display characters (standard characters) 16 characters x 2 lines
No. of registered screens
65,000 max.
Screen data capacity (standard)
24 KB in Programmable models
Expansion memory
–
Memory card interface
–
Internal memory
1K words data, 1K words retentative memory
Printer connection
Supported
Multi-Vendor support
Supported for several non-Omron PLCs. *1
Backlight life
LED, min. 50,000 hours
*1
Please contact Omron for a list of available drivers.
73
74
NA series
Ново поколение машинен интерфейс
Sysmac machine interface
The next generation of Machine Interface
•
•
•
•
Complete functionality scalable with widescreen across 7”, 9”, 12”, 15” range
Available in black or silver
High resolution (1280 × 800 pixel for 12” and 15”, 800 × 480 pixel for 7” and 9”)
Coming soon. Please contact your Omron representative
Coming soon
System overview
All wide screen models,
7,, 9,, 12,, 15” available
Black and Silver
Edge
g to edge
g design
g
RUN/ERR indicator
Sysmac
y
cut out design
g
Resistive touch screen,
single touch – ideal for
environments with gloves etc.
Programmable function buttons
-
SD Card slot
2 × USB
USB slave (Tool port)
2 Ethernet ports (One for factory, one for office network)
1 Serial
24 VDC
Note: Coming soon. Please contact your Omron representative.
75
4
The design has been based on real applications and customer requirements, a futureproofed, scalable platform that will evolve with their ever-changing needs, allowing
real time reaction to events
HMI
An HMI that is dynamic, intuitive and predictive makes industrial machines more
attractive and competitive. The Omron Sysmac HMI enables faster, more efficient
control and monitoring—and a more natural, proactive relationship between operator
and machine.
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
Ordering information
I/O cables
Shape
PLC connection
FCN24
FCN40
FCN56
Terminal connection
250 300
–
Straight
XW2Z-[....]AD-L
–
–
n. a.
XW2Z-[....]AL-L


Straight
XW2Z-[....]BH-L01
Reverse
XW2Z-[....]BH-L02
75
100
150 200
MIL20
–

–

–

–

–
Open ends
–
–
–

–

–

MIL20 × 2
–
–
–



–

400 500
MIL40
–

–



–

–

Straight
XW2Z-[....]BF-L
Open ends
–
–
–

–

–

–

n. a.
XW2Z-[....]BN-L
MIL20 × 3
–
–
–
–


–

–
–
Straight
XW2Z-[....]CJ-L01
Reverse
XW2Z-[....]CJ-L02
Straight
XW2Z-[....]CK-L01
Reverse
XW2Z-[....]CK-L02
–
–
–
–


–
–
–
–

–

–
MIL20
–

–

–

–
Open ends
–

–



–
Fork terminals
–

–



MIL34
MIL34
–
–
–
–
–
MIL40
MIL20 × 2
–
–


–
Note: For [….] fill in the 4-digit length in cm
Order code
50
MIL60
MIL20
Wiring
30
MIL20 + MIL40
76
Length in cm
–

–
–
–
–
Straight
XW2Z-[....]CG-L
–
–
Straight
XW2Z-[....]DD-L

–

n. a.
XW2Z-[....]DL-L
–

–

n. a.
XW2Z-[....]DM-L

–
–
–
–
Straight
XW2Z-[....]EE-L

–

–

Reverse
XW2Z-[....]FH-L01
Straight
XW2Z-[....]FH-L02
MIL40


–



–

–

Straight
XW2Z-[....]FF-L
Open ends
–
–
–





–

n. a.
XW2Z-[....]FN-L
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
Cables and accessories
I/O cables XW2Z
XW2Z-_AD-L
PLC connection
Terminal connection
24-pin FCN Connector
Wiring
20-pin MIL Connector
Length in cm (L)
Straight
Order code
30
50
75
100
150 200
250 300
400
500
–

–
–
–
–
–
–
–
–
XW2Z-0050AD-L
–
–
–

–
–
–
–
–
–
XW2Z-0100AD-L
–
–
–
–
–

–
–
–
–
XW2Z-0200AD-L
–
–
–
–
–
–
–

–
–
XW2Z-0300AD-L
A SIDE
B SIDE
B1
(40)
A1
20
19
(45) 2
1
(40)
(100)
(20)
5
(20)
B12
A12
(45)
L
XW2Z-_AL-L
PLC connection
Terminal connection
24-pin FCN
Wiring
Loose Wires
Length in cm (L)
Straight
Order code
30
50
75
100
150 200
250 300
400
500
–
–
–

–
–
–
–
–
–
XW2Z-0100AL-L
–
–
–
–
–

–
–
–
–
XW2Z-0200AL-L
–
–
–
–
–
–
–

–
–
XW2Z-0300AL-L
A SIDE
B1
A1
B12
A12
(40)
(100)
(20)
(200)
(45)
L
XW2Z-_BH-L01
PLC connection
40-pin FCN
Terminal connection
Two 20-pin MIL
Wiring
Length in cm (L1)
Straight
Length in cm (L2)
Order code
100 150
200 300
400 500
75
125
175 275
375
475

–
–
–
–
–

–
–
–
–
–
XW2Z-0100BH-L01
–

–
–
–
–
–

–
–
–
–
XW2Z-0150BH-L01
–
–

–
–
–
–
–

–
–
–
XW2Z-0200BH-L01
–
–
–

–
–
–
–
–

–
–
XW2Z-0300BH-L01
–
–
–
–

–
–
–
–
–

–
XW2Z-0400BH-L01
–
–
–
–
–

–
–
–
–
–

XW2Z-0500BH-L01
20
19
CN3
(250)
(15)
(YELLOW)
CN1
(40)
A1
(100)
CN3
B1
(20)
(15)
1 20
CN2
19
CN2
B20
2
A20
(45)
(BLACK)
(500)
2
1
L2
L1
77
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
XW2Z-_BH-L02
PLC connection
40-pin FCN
Terminal connection
Wiring
Two 20-pin MIL
Length in cm (L1)
Reverse
Length in cm (L2)
100
150 200
300 400
500 75

–
–
–
–
–
–

–
–
–
–
–
–

–
–
–
–
–

–
–
–
–
–
–
Order code
125 175
275 375
475

–
–
–
–
–
XW2Z-0100BH-L02
–

–
–
–
–
XW2Z-0150BH-L02
–
–
–

–
–
–
XW2Z-0200BH-L02
–
–
–
–
–

–
–
XW2Z-0300BH-L02
–

–
–
–
–
–

–
XW2Z-0400BH-L02
–
–

–
–
–
–
–

XW2Z-0500BH-L02
20
19
CN2
(250)
(15)
(BLACK)
CN1
(40)
A1
(100)
CN2
B1
(20)
(15)
1 20
CN3
19
CN3
B20
2
A20
(45)
(YELLOW)
2
(500)
1
L2
L1
XW2Z-_BF-L
PLC connection
40-pin FCN
Terminal connection
Wiring
40-pin MIL
Length in cm (L)
Straight
Order code
30
50
75
100 150
200 250
300 400
500
–

–
–
–
–
–
–
–
–
XW2Z-0050BF-L
–
–
–

–
–
–
–
–
–
XW2Z-0100BF-L
–
–
–
–

–
–
–
–
–
XW2Z-0150BF-L
–
–
–
–
–

–
–
–
–
XW2Z-0200BF-L
–
–
–
–
–
–
–

–
–
XW2Z-0300BF-L
–
–
–
–
–
–
–
–
–

XW2Z-0500BF-L
A SIDE
B1
B20
B SIDE
(40)
A1
40
39
(45) 2
1
(40)
(100)
(20)
(20)
A20
(45)
L
XW2Z-_BN-L
PLC connection
40-pin FCN
Terminal connection
Wiring
Loose Wires
Length in cm (L)
Straight
Order code
30
50
75
100 150
200 250
300 400
500
–
–
–

–
–
–
–
–
–
XW2Z-0100BN-L
–
–
–
–
–

–
–
–
–
XW2Z-0200BN-L
–
–
–
–
–
–
–

–
–
XW2Z-0300BN-L
–
–
–
–
–
–
–
–
–

XW2Z-0500BN-L
A SIDE
B1
(40)
A1
(100)
(20)
B20
(200)
A20
(45)
L
78
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
Terminal connection
Wiring
Length in cm (L1)
100 150
56-pin FCN
Three 20-pin MIL
Straight
Length in cm (L2)
Order code
200 300
400 500
75
125
175 275
375
475
–

–
–
–
–
–

–
–
–
–
XW2Z-0150CJ-L01
–
–

–
–
–
–
–

–
–
–
XW2Z-0200CJ-L01
–
–
–

–
–
–
–
–

–
–
XW2Z-0300CJ-L01
(500)
20
(15)
CN4
(GRAY)
CN1
B1
2
(40)
A1
CN4
19
(100)
5
PLC connection
Cables and accessories
XW2Z-_CJ-L01
1
(250)
(20)
19
CN3
20
(15)
CN3
(YELLOW)
B28
A28
1 20
2
(15)
(45)
CN2
19
CN2
(BLACK)
2
(500)
1
L2
L1
XW2Z-_CJ-L02
PLC connection Terminal
connection
56-pin FCN
Wiring
Length in cm (L1)
Three 20-pin MIL Reverse
Length in cm (L2)
Length in cm (L3)
Order code
100
150 200
300 400
500 75
125 175
275 375
475 50
100
150
250
300
–

–
–
–
–
–

–
–
–
–
–

–
–
–
XW2Z-0150CJ-L02
–
–

–
–
–
–
–

–
–
–
–
–

–
–
XW2Z-0200CJ-L02
–
–
–

–
–
–
–
–

–
–
–
–
–

–
XW2Z-0300CJ-L02
L1
(750)
20
(15)
CN4
(GRAY)
CN1
B1
2
(40)
A1
(100)
1
(500)
(20)
20
(15)
A28
(15)
(45)
19
CN3
CN3
(YELLOW)
B28
CN4
19
20
2
19
CN2
1
CN2
(BLACK)
(250)
2
1
L3
L2
79
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
XW2Z-_CK-L0_
PLC connection
56-pin
Terminal connection
Wiring
40-pin MIL
Length in cm (L1)
Length in cm (L2)
Order code
100
150 200
300 400
500 75
125 175
275 375
475
Straight
–

–
–
–
–
–

–
–
–
–
XW2Z-0150CK-L01
Reverse
–

–
–
–
–
–

–
–
–
–
XW2Z-0150CK-L02
Straight
–
–

–
–
–
–
–

–
–
–
XW2Z-0200CK-L01
Reverse
–
–

–
–
–
–
–

–
–
–
XW2Z-0200CK-L02
(250)
(15)
20
(YELLOW)
19
CN3
CN3
CN1
B1
(40)
A1
(100)
2
1
(20)
40
(15)
CN2
B28
CN2
39
A28
(45)
(BLACK)
(500)
2
1
L2
L1
XW2Z-_CG-L
PLC connection
56-pin FCN
Terminal connection
Wiring
60-pin MIL
Length in cm (L)
Straight
Order code
30
50
75
100 150
200 250
300 400
500
–
–
–

–
–
–
–
–
–
XW2Z-0100CG-L
–
–
–
–
–

–
–
–
–
XW2Z-0200CG-L
–
–
–
–
–
–
–

–
–
XW2Z-0300CG-L
60
59
(45) 2
1
A SIDE
B SIDE
B1
(40)
A1
B28
(40)
(100)
(20)
(20)
A28
(45)
L
XW2Z-_DD-L
PLC connection
20-pin MIL
Terminal connection
Wiring
20-pin MIL
Length in cm (L)
Straight
(40)
A SIDE
2
Order code
30
50
75
100 150
200 250
300 400
500
–

–
–
–
–
–
–
–
–
XW2Z-0050DD-L
–
–
–

–
–
–
–
–
–
XW2Z-0100DD-L
–
–
–
–
–

–
–
–
–
XW2Z-0200DD-L
(40)
(100)
(20)
(20)
B SIDE
20
19
(45) 2
1
1
19
20 (45)
L
80
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
PLC connection
20-pin MIL
Terminal connection
Wiring
Loose Wires
Length in cm (L1)
Straight
Cables and accessories
XW2Z-_DL-L
Order code
30
50
75
100
150 200
250 300
400
500
–

–
–
–
–
–
–
–
–
XW2Z-0050DL-L
–
–
–

–
–
–
–
–
–
XW2Z-0100DL-L
–
–
–
–

–
–
–
–
–
XW2Z-0150DL-L
–
–
–
–
–

–
–
–
–
XW2Z-0200DL-L
–
–
–
–
–
–
–

–
–
XW2Z-0300DL-L
–
–
–
–
–
–
–
–
–

XW2Z-0500DL-L
A SIDE
19
2
(40)
(100)
(20)
5
1
(200)
20 (45)
L
XW2Z-_DM-L
PLC connection
20-pin MIL
Terminal connection
Wiring
Length in cm (L1)
Loose Wires with Fork Terminals Straight
Order code
30
50
75
100
150 200
250 300
400
500
–

–
–
–
–
–
–
–
–
XW2Z-0050DM-L
–
–
–

–
–
–
–
–
–
XW2Z-0100DM-L
–
–
–
–

–
–
–
–
–
XW2Z-0150DM-L
–
–
–
–
–

–
–
–
–
XW2Z-0200DM-L
–
–
–
–
–
–
–

–
–
XW2Z-0300DM-L
–
–
–
–
–
–
–
–
–

XW2Z-0500DM-L
250 300
400
500
–
–
–
A SIDE
B SIDE
1
2
(40)
(40)
(100)
19
1
(20)
(20)
20 (45)
20
(300)
L
XW2Z-0200EE-L
PLC connection
34-pin MIL
Terminal connection
Wiring
34-pin MIL
Length in cm (L1)
Straight
(40)
A SIDE
2
Order code
30
50
75
100
150 200
–
–
–
–
–
(40)
(100)
(20)
(20)
34
33
2
1
1
33

34 (45)
(45)
–
XW2Z-0200EE-L
B SIDE
L
81
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
XW2Z-_FH-L01
PLC connection
40-pin MIL
Terminal connection
Two 20-pin MIL
Wiring
Length in cm (L1)
Reverse
Length in cm (L2)
75
100 200
300 400
500 50

–
–
–
–
–
–

–
–
–
–
–
–

–
–
–
–
–

–
–
–
–
Order code
75
175
275 375
475

–
–
–
–
–
XW2Z-0075FH-L01
–

–
–
–
–
XW2Z-0100FH-L01
–
–
–

–
–
–
XW2Z-0200FH-L01
–
–
–
–
–

–
–
XW2Z-0300FH-L01
–

–
–
–
–
–

XW2Z-0500FH-L01
20
19
CN3
(250)
(15)
1
CN1
2
(40)
(YELLOW)
CN3
(100)
(20)
(15)
2
1 20
19
CN2
CN2
39
40
(45)
(BLACK)
2
(500)
1
L2
L1
XW2Z-_FH-L02
PLC connection
40-pin MIL
Terminal connection
Two 20-pin MIL
Wiring
Length in cm (L1)
Straight
Length in cm (L2)
75
100 200
300 400
500 50

–
–
–
–
–
–

–
–
–
–
–
–

–
–
–
–
–

–
–
–
–
Order code
75
175
275 375
475

–
–
–
–
–
XW2Z-0075FH-L02
–

–
–
–
–
XW2Z-0100FH-L02
–
–
–

–
–
–
XW2Z-0200FH-L02
–
–
–
–
–

–
–
XW2Z-0300FH-L02
–

–
–
–
–
–

XW2Z-0500FH-L02
20
19
CN2
(250)
(15)
1
CN1
2
(40)
(BLACK)
CN2
(100)
(20)
(15)
2
1 20
19
CN3
CN3
39
40
(45)
(YELLOW)
(500)
L2
L1
82
2
1
I/O cables
I/O cables and terminal blocks
Кабели и аксесоари
Terminal connection
Wiring
Length in cm (L1)
30
40-pin MIL
40-pin MIL

Straight
A SIDE
(40)
2
Order code
75
100
150 200
250 300
400
500
–
–
–
–
–
–
–
–
XW2Z-0030FF-L
–

–
–
–
–
–
–
–
–
XW2Z-0050FF-L
–
–
–

–
–
–
–
–
–
XW2Z-0100FF-L
–
–
–
–

–
–
–
–
–
XW2Z-0150FF-L
–
–
–
–
–

–
–
–
–
XW2Z-0200FF-L
–
–
–
–
–
–
–

–
–
XW2Z-0300FF-L
–
–
–
–
–
–
–
–
–

XW2Z-0500FF-L
(40)
(100)
40 (45)
B SIDE
39
40
(20)
(20)
1
39
50
(45)
5
PLC connection
Cables and accessories
XW2Z-_FF-L
1
2
L
XW2Z-_FN-L
PLC connection
40-pin MIL
Terminal connection
Wiring
Loose Wires
Length in cm (L1)
Straight
Order code
30
50
75
100
150 200
250 300
400
500
–
–
–

–
–
–
–
–
–
XW2Z-0100FN-L
–
–
–

–
–
–
–
–
XW2Z-0150FN-L
–
–
–
–
–

–
–
–
–
XW2Z-0200FN-L
–
–
–
–
–
–

–
–
–
XW2Z-0250FN-L
–
–
–
–
–
–
–

–
–
XW2Z-0300FN-L
–
–
–
–
–
–
–
–
–

XW2Z-0500FN-L
A SIDE
2
1
39
(40)
(100)
(20)
(200)
40 (45)
L
83
I/O terminal blocks
Кабели и аксесоари
I/O cables and terminal blocks
I/O terminal blocks
General purpose I/O terminals
Shape
Connection type
Number of points
Order code
Push-in
20 pt
XW2R-P20G-T
34 pt
XW2R-P34G-T
40 pt
XW2R-P40G-T
50 pt
XW2R-P50G-T
60 pt
XW2R-P60G-T
20 pt
XW2R-E20G-T
34 pt
XW2R-E34G-T
40 pt
XW2R-E40G-T
50 pt
XW2R-E50G-T
60 pt
XW2R-E60G-T
20 pt
XW2R-J20G-T
34 pt
XW2R-J34G-T
40 pt
XW2R-J40G-T
50 pt
XW2R-J50G-T
60 pt
XW2R-J60G-T
Connection type
I/O unit type
Order code
Push-in
32 inputs Fujitsu
XW2R-P34G-C1
32 inputs MIL
XW2R-P34G-C2
32 outputs Fujitsu
XW2R-P34G-C3
32 outputs MIL
XW2R-P34G-C4
32 inputs Fujitsu
XW2R-E34G-C1
32 inputs MIL
XW2R-E34G-C2
32 outputs Fujitsu
XW2R-E34G-C3
32 outputs MIL
XW2R-E34G-C4
32 inputs Fujitsu
XW2R-J34G-C1
32 inputs MIL
XW2R-J34G-C2
32 outputs Fujitsu
XW2R-J34G-C3
32 outputs MIL
XW2R-J34G-C4
Clamp
Screw
Omron PLC I/O terminals
Shape
Clamp
Screw
84
Ethernet patch cables, standard RJ45 connectors
Shape
Connector 1 Connector 2 Material Cable
Colour
Length in cm
Order code
20
30
50
100 150
200 300
500 750
1000 1500 2000
RJ45 std.
RJ45 std.
LSZH
Cat6a S/FTP Blue
4 pairs












XS6W-6LSZH8SS[...]CM-B
RJ45 std.
RJ45 std.
LSZH
Cat6a S/FTP Yellow
4 pairs












XS6W-6LSZH8SS[...]CM-Y
RJ45 std.
RJ45 std.
LSZH
Cat6a S/FTP Green
4 pairs












XS6W-6LSZH8SS[...]CM-G
RJ45 std.
RJ45 std.
PUR
Cat5e S/FTP Green
4 pairs
–
–










XS6W-5PUR8SS[...]CM-G
Note: For […] fill in the length in cm.
Ethernet patch cables, RJ45/M12 connectors
Shape
Connector 1 Connector 2 Material Cable
RJ45
RJ45
Colour
Length in cm
Order code
30
50
100
200 300
500 1000 1500
PVC
Cat5e Shielded Quad
Light Blue
A
B
C
D
E
G
J
K
XS5W-T421-[.]MD-K
M12 straight M12 straight PVC
Cat5e Shielded Quad
Light Blue
–
B
C
D
E
G
J
K
XS5W-T421-[.]M2-K
M12 straight RJ45
PVC
Cat5e Shielded Quad
Light Blue
A
B
C
D
E
G
J
K
XS5W-T421-[.]MC-K
M12 angled M12 angled PVC
Cat5e Shielded Quad
Light Blue
–
B
C
D
E
G
J
K
XS5W-T422-[.]M2-K
M12 angled RJ45
Cat5e Shielded Quad
Light Blue
A
B
C
D
E
G
J
K
XS5W-T422-[.]MC-K
PVC
Note: For [.] fill in the 1-character length code.
Specifications
Item
XS6W-6LSZH8SS_CM-_
Rated current
1 A (at 50°C)
XS6W-5PUR8SS_CM-G
Withstand voltage
1,000 VDC for 60 s (leakage current: 1 mA max.)
Ambient operating temperature
−20 to 60°C
−40 to 85°C
Ambient storage temperature
−20 to 60°C
−40 to 85°C
Ambient installation temperature
0 to 50°C
−10 to 60°C
Protective structure
IP20
IP20
85
Cables and accessories
Ethernet cables and accessories
Кабели и аксесоари
5
Ethernet cables
Accessories
Ethernet cables and accessories
Кабели и аксесоари
Accessories
Type
Connector
Specification
Colour
Length
Order code
Ethernet installation cable
none
CAT 5, SF/UTP, 4 × 2 × AWG 24/1
(solid core), Polyurethane (PUR)
Green
100 m
WM IE5IC4x2xAWG24/1-PUR
none
CAT 5, SF/UTP, 4 × 2 × AWG 26/7
(stranded core), Polyurethane (PUR)
100 m
WM IE5IC4x2xAWG26/7-PUR
Ethernet socket
RJ45 socket
DIN-rail mount socket to terminate
installation cable in the cabinet
Grey
60 × 17.5 × 67 mm
WM IE-TO-RJ45-FJ-B
Ethernet field-mount plugs
Metal RJ45
for AWG22 to AWG26
Chrome
52 mm
WM IE-PS-RJ45-FH-BK
Plastic RJ45
for AWG22 to AWG24
Black
52 mm
XS6G-T421-1
Industrial switching hubs
Shape
Functions
Ports
Failure detection
Power supply voltage
Order code
Quality of Service (QoS):
EtherNet/IP control data priority
Failure detection:
Broadcast storm and LSI error detection
10/100BASE-TX, Auto-negotiation
3
–
24.0 VDC±5%
W4S1-03B
5
W4S1-05B

W4S1-05C
EtherCAT junction slave
Shape
Functions
Ports
Power supply voltage
Order code
Creation of star- and tree topologies
in EtherCAT networks.
Distributed Clock (DC) is supported.
3
20.4 to 28.8 VDC
(24 VDC –15% to 20%)
GX-JC03
6
86
GX-JC06
Wireless communication
Безжична комуникация
FA Wireless LAN unit
WE70 utilises spread-spectrum modulation technology based on radio waves to
enable communication between devices in a limited area. This gives users the
mobility to move around within a broad coverage area and still be connected to the
network. The smart roaming function enables high speed roaming therefore moving
equipment and mobile object can communicate at high speed.
Conforms to IEEE 802.11a/b/g.
Same noise and environment resistance level as a PLC.
Features Omron's original security system.
Signals can be observed with LED indicators.
Conforms to radio wave standards for the USA, Europe, and China.
5
•
•
•
•
•
Ordering information
Area
Type
Order code
Europe
Access Point (Master)
WE70-AP-EU
Client (Slave)
WE70-CL-EU
Access Point (Master)
WE70-AP-US
Client (Slave)
WE70-CL-US
Access Point (Master)
WE70-AP-CN
Client (Slave)
WE70-CL-CN
Type
Specifications
Order code
Directional Magnetic-base Antenna
1 set with two Antennas, 2.4 GHz/5 GHz Dual-band compatible
WE70-AT001H
USA
China
Accessories
Type
Order code
DIN Rail Mounting Bracket (for TH35 7.5)
WT30-FT001
DIN Rail Mounting Bracket (for TH35 15)
WT30-FT002
Antenna Extension Cable (5 m)
Note: For Ethernet Cables and Accessories, see page 85
WE70-CA5M
СИТЕЛ ООД - OMRON
www.sitel-omron.com
дистрибутор
София - бул. Цариградско шосе 113А, ет.3,
Пловдив - ул. Белград 2, ет. 2, офис 104
офис 5 /в Лито Балкан, зад Shell и The Mall/
тел./факс: (02) 975 2282
[email protected]
(до Новотела)
тел./факс: (032) 96 91 55
[email protected]
Плевен - бул. Русе 37А, ет. 3, офис 2
Стара Загора - ул. Захарий Княжески 21, ап. 5
тел./факс: (042) 62 11 65
[email protected]
тел./факс: (064) 81 58 70
[email protected]
Cables and accessories
WE70
87
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement