User`s manual - Support

User`s manual - Support
ELECTRONIC CASH REGISTER
-100
TE
U
O
Y
K
N
A
H
T
T
P
I
E
C
E
R
YOUR
!
N
I
A
G
A
CALL
Y
R
E
C
GRO
Y
R
I
A
D
.
A
.
B
H.
N
E
Z
O
FR
FOOD
N
E
S
S
E
T
A
C
DELI
Eu
Di
U.K.
USER'S MANUAL
Safety Precautions
• To use this product safely and correctly, read this manual thoroughly and operate as
instructed.
After reading this guide, keep it close at hand for easy reference.
Please keep all informations for future reference.
• Always observe the warnings and cautions indicated on the product.
About the icons
In this guide various icons are used to highlight safe operation of this product and to prevent
injury to the operator and other personnel and also to prevent damage to property and this
product. The icons and definitions are given below.
Indicates that there is a risk of severe injury or death if used incorrectly.
Indicates that injury or damage may result if used incorrectly.
Icon examples
To bring attention to risks and possible damage, the following types of icons are used.
The symbol indicates that it includes some symbol for attracting attention (including
warning). In this triangle the actual type of precautions to be taken (electric shock, in this
case) is indicated.
The symbol indicates a prohibited action. In this symbol the actual type of prohibited
actions (disassembly, in this case) will be indicated.
The symbol indicates a restriction. In this symbol the type of actual restriction (removal of
the power plug from an outlet, in this case) is indicated.
Warning!
Handling the register
Should the register malfunction, start to emit smoke or a strange odor, or
otherwise behave abnormally, immediately shut down the power and unplug
the AC plug from the power outlet. Continued use creates the danger of fire and
electric shock.
• Contact CASIO service representative.
Do not place containers of liquids near the register and do not allow any
foreign matter to get into it. Should water or other foreign matter get into the
register, immediately shut down the power and unplug the AC plug from the
power outlet. Continued use creates the danger of shorting, fire and electric
shock.
• Contact CASIO service representative.
Should you drop the register and damage it, immediately shut down the power
and unplug the AC plug from the power outlet. Continued use creates the
danger of shorting, fire and electric shock.
• Attempting to repair the register yourself is extremely dangerous. Contact CASIO service
representative.
E
2
Warning!
Never try to take the register apart or modify it in any way. High-voltage
components inside the register create the danger of fire and electric shock.
• Contact CASIO service representative for all repair and maintenance.
Power plug and AC outlet
Use only a proper AC electric outlet (100V~240V) . Use of an outlet with a
different voltage from the rating creates the danger of malfunction, fire, and
electric shock. Overloading an electric outlet creates the danger of overheating
and fire.
Make sure the power plug is inserted as far as it will go. Loose plugs create the
danger of electric shock, overheating, and fire.
• Do not use the register if the plug is damaged. Never connect to a power outlet that is loose.
Use a dry cloth to periodically wipe off any dust built up on the prongs of the
plug. Humidity can cause poor insulation and create the danger of electric
shock and fire if dust stays on the prongs.
Do not allow the power cord or plug to become damaged, and never try to
modify them in any way. Continued use of a damaged power cord can cause
deterioration of the insulation, exposure of internal wiring, and shorting, which
creates the danger of electric shock and fire.
• Contact CASIO service representative whenever the power cord or plug requires repair or
maintenance.
Caution!
Do not place the register on an unstable or uneven surface. Doing so can
cause the register — especially when the drawer is open — to fall, creating the
danger of malfunction, fire, and electric shock.
Do not place the register in the following areas.
• Areas where the register will be subject to large amounts of humidity or dust, or directly
exposed to hot or cold air.
• Areas exposed to direct sunlight, in a close motor vehicle, or any other area subject to very
high temperatures.
The above conditions can cause malfunction, which creates the danger of fire.
Do not overlay bend the power cord, do not allow it to be caught between
desks or other furniture, and never place heavy objects on top of the power
cord. Doing so can cause shorting or breaking of the power cord, creating the
danger of fire and electric shock.
Be sure to grasp the plug when unplugging the power cord from the wall outlet.
Pulling on the cord can damage it, break the wiring, or cause short, creating the
danger of fire and electric shock.
Never touch the plug while your hands are wet. Doing so creates the danger of
electric shock. Pulling on the cord can damage it, break the wiring, or cause
short, creating the danger of fire and electric shock.
Never touch the printer head and the platen.
3
E
Introduction & Contents
Introduction & Contents ...................................................................................... 4
Getting Started ..................................................................................................... 7
Remove the cash register from its box. ............................................................................ 7
Remove the tape holding parts of the cash register in place. ........................................... 7
Install the three memory backup batteries. ....................................................................... 7
Install receipt/journal paper. .............................................................................................. 9
Plug the cash register into a wall outlet. .......................................................................... 11
Insert the mode key marked “PGM” into the mode switch. .............................................. 11
Turn the mode key to the “REG” position. ....................................................................... 11
Set the date. ................................................................................................................... 12
Set the time. .................................................................................................................... 12
Select printouts receipt or journal. .................................................................................. 12
Tax table programming ................................................................................................... 13
Introducing TE-100 ............................................................................................. 17
General guide ................................................................................................................. 17
Roll paper, Receipt On/Off key, Mode key, Drawer, Drawer lock .......................................................... 17
Mode switch, Lock/unlock the multipurpose tray ................................................................................... 18
Displays .......................................................................................................................... 19
Keyboard ........................................................................................................................ 20
Basic Operations and Setups ........................................................................... 22
How to read the printouts ....................................................................................................
How to use your cash register .............................................................................................
Displaying the time and date ..........................................................................................
Preparing and using department keys .................................................................................
Registering department keys ..........................................................................................
Programming department keys .......................................................................................
Registering department keys by programming data .......................................................
Preparing and using PLUs ..................................................................................................
Programming PLUs ........................................................................................................
Registering PLUs ............................................................................................................
Preparing and using discounts ............................................................................................
Programming discounts ..................................................................................................
Registering discounts .....................................................................................................
Preparing and using reductions ...........................................................................................
Programming for reductions ...........................................................................................
Registering reductions ....................................................................................................
Registering charge and check payments ............................................................................
Registering returned goods in the REG mode ....................................................................
Registering returned goods in the RF mode .......................................................................
Registering money received on account .............................................................................
Registering money paid out .................................................................................................
Making corrections in a registration .....................................................................................
No sale registration .............................................................................................................
Printing the daily sales reset report .....................................................................................
22
23
24
25
25
26
27
28
28
29
30
30
31
32
32
33
34
35
36
37
37
38
40
41
Convenient Operations and Setups ................................................................. 42
Clerk control function ...........................................................................................................
Clerk sign on and sign off ...............................................................................................
Post-finalization receipt format, General printing control,
Compulsory, Machine features ...........................................................................................
About post-finalization receipt .........................................................................................
E
4
42
42
43
43
44
45
46
46
47
47
47
48
Introduction & Contents
Programming general printing control .............................................................................
Programming compulsory and clerk control function ......................................................
Programming read/reset report printing control ..............................................................
Setting a store/machine number .........................................................................................
Programming to clerk ..........................................................................................................
Programming clerk number ............................................................................................
Programming trainee status of clerk ...............................................................................
Programming descriptors and messages ............................................................................
Programming report descriptor, grand total, special character,
report title, receipt message and clerk name .................................................................
48
Report descriptor ................................................................................................................................... 48
Clerk name, Grand total, Special character, Report title ....................................................................... 49
Receipt message .................................................................................................................................. 50
Programming department key descriptor ........................................................................
Programming PLU descriptor .........................................................................................
Programming function key descriptor .............................................................................
Programming receipt message/logo stamp control function ...........................................
Entering characters .............................................................................................................
Using character keyboard ...............................................................................................
Entering characters by code ...........................................................................................
Department key feature programming .................................................................................
Batch feature programming ............................................................................................
Individual feature programming ......................................................................................
PLU feature programming ...................................................................................................
Batch feature programming ............................................................................................
Individual feature programming ......................................................................................
Printing VAT breakdowns ....................................................................................................
Percent key feature programming .......................................................................................
Currency exchange programming .......................................................................................
Currency exchange rate programming ...........................................................................
Currency exchange feature programming ......................................................................
Other function key feature programming .............................................................................
Cash, Charge, Check key ...............................................................................................
Received on account, Paidout key, Minus key ...............................................................
#/No sale key ..................................................................................................................
Calculator functions .............................................................................................................
About the daylight saving time ............................................................................................
Printing read/reset reports ...................................................................................................
Reading the cash register's program...................................................................................
50
51
52
52
53
53
54
55
55
56
57
57
58
61
62
64
64
64
67
67
68
68
69
70
71
77
Troubleshooting ................................................................................................. 80
When an error occurs ..........................................................................................................
When the register does not operate at all ...........................................................................
When the L sign appears on the display .............................................................................
In case of power failure .......................................................................................................
80
81
82
82
User Maintenance and Options ........................................................................ 83
To replace journal paper ...................................................................................................... 83
To replace receipt paper ...................................................................................................... 84
Options ................................................................................................................................ 84
Specifications ..................................................................................................... 85
Index .................................................................................................................... 86
5
E
Introduction & Contents
Unpacking the register
Mode key
(Operator/Program key)
User's manual/
Drawer key
Us
er'
s
M
an
ua
l
Take-up reel
Roll paper
Memory backup
batteries
Welcome to the CASIO TE-100!
Congratulations upon your selection of a CASIO Electronic Cash Register, which is designed to
provide years of reliable operation.
Operation of a CASIO cash register is simple enough to be mastered without special training.
Everything you need to know is included in this manual, so keep it on hand for reference.
Consult your CASIO dealer if you have any questions about points not specifically covered in this
manual.
The main plug on this equipment must be used to disconnect main power.
Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.
Please keep all information for future reference.
E
6
Getting Started
This section outlines how to unpack the cash register and get it ready to operate. You should read this part of
the manual even if you have used a cash register before. The following is the basic set up procedure, along
with page references where you should look for more details.
Us
er'
sM
an
ua
l
Remove the cash register from its box.
Make sure that all of the parts and accessories
are included.
2.
Remove the tape holding parts of
the cash register in place.
Also remove the small plastic bag taped to the
printer cover. Inside you will find the mode keys.
3.
Intruduction & Contents/Getting Started
1.
Install the three memory
backup batteries.
1. Remove the printer
cover and open the
platen arm.
2. Remove the battery
compartment cover.
Slide the cover and
pull it up.
battery compartment cover
printer cover
platen arm
7
E
Getting Started
3.
Install the three memory backup batteries. (continued…)
3. Note the (+) and (–) markings in the battery
compartment. Load a set of three new SUM3 (UM-3) batteries so that their positive (+)
and negative (–) ends are facing as indicated
by the markings.
4. Replace the battery compartment cover.
5. Close the platen arm and replace the printer cover.
Important!
These batteries protect information stored in your cash register's memory when there is a
power failure or when you unplug the cash register. Be sure to install these batteries.
Precaution!
Incorrectly using batteries can cause them to burst or leak, possibly damaging the interior
of the cash register. Note the following.
• Be sure that the positive (+) and negative (–) ends of the batteries are facing as marked in the
battery compartment when you load them into the unit.
• Never mix batteries of different types.
• Never mix old batteries with new ones.
• Never leave dead batteries in the battery compartment.
• Remove the batteries if you do not plan to use the cash register for long periods.
• Replace the batteries at least once a year, no matter how much the cash register is used during
the period.
WARNING!
• Never try to recharge the batteries supplied with the unit.
• Do not expose batteries to direct heat, let them become shorted or try to take them apart.
Keep batteries out of the reach of small children. If your child should swallow a battery,
consult a physician immediately.
E
8
4.
Install receipt/journal paper.
Platen arm
Platen
Printer
Getting Started
Important!
Take away the head protection sheet from the printer and close the platen arm.
Caution! (in handling the thermal paper)
• Never touch the printer head and the platen.
• Unpack the thermal paper just before your use.
• Avoid heat/direct sunlight.
• Avoid dusty and humid places for storage.
• Do not scratch the paper.
• Do not keep the printed paper under the following circumstances:
High humidity and temperature/direct sunlight/contact with glue, thinner or a rubber eraser.
To install receipt paper
Step 1
Step 4
Remove the printer cover.
Put the leading end of the
paper over the printer.
Step 2
Step 5
Open the platen arm.
Close the platen arm
slowly until it locks
steadily.
Step 3
Complete
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Replace the printer cover,
passing the leading end of
the paper through the
cutter slot. Tear off the
excess paper.
9
E
Getting Started
To install journal paper
Step 1
Remove the printer cover.
Step 2
Step 7
Open the platen arm.
Slide the leading end of
the paper into the groove
on the spindle of the takeup reel and wind it onto
the reel two or three turns.
Step 3
Step 8
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Replace the paper guide of
the take-up reel.
Step 4
Step 9
Put the leading end of the
paper over the printer.
Place the take-up reel into
place behind the printer,
above the roll paper.
Step 5
Step 10
Close the platen arm
slowly until it locks
steadily.
Press the f key to take
up any slack in the paper.
Step 6
Remove the paper guide of
the take-up reel.
E
10
During machine
installation, press the f
key after power on.
Complete
Replace the printer cover.
5.
Plug the cash register into a wall outlet.
6.
Insert the mode key marked “PGM” into the mode switch.
OP
C-A02
PGM
C-A32
Getting Started
Be sure to check the sticker (rating plate) on the side
of the cash register to make sure that its voltage
matches that of the power supply in your area.
CAL
REG
OFF
RF
PGM
7.
Turn the mode key to the “REG” position.
The display should change to the following.
CAL
X
REG
Z
OFF
RF
PGM
11
E
Getting Started
8.
Set the date.
CAL
X
REG
Z
61s 6 :: :: :: 6 X 6 C
OFF
Year
C-A32
PGM
PGM
RF
Mode Switch
9.
Month
Day
Current date
Example:
15, March 2002 2 020315
Set the time.
CAL
X
REG
Z
6 1s 6 : : : : 6 X 6 C
OFF
Current time
C-A32
PGM
PGM
RF
Mode Switch
10.
Example:
08:20 AM 2 0820
09:45 PM 2 2145
Select printouts receipt or journal.
CAL
X
REG
Z
6 1s 6
OFF
C-A32
PGM
Print journal = 1
}
6 h6s
PGM
RF
{
Issue receipt = 0
Mode Switch
Note !
If you need journal and are sometimes required receipts by customers, select “issue receipt”.
After business hours, issue the electronic journal report.
E
12
11.
Tax table programming
After you program the tax calculations, you also have to individually specify which departments
(page 26) and PLUs (page 28) are to be taxed.
Programming tax calculations (without special rounding)
Prepare the following subjects:
1. Tax rates
2. Rounding method for tax calculation
(Round up/Round off/Cut off)
3. Tax calculation system (Add-on/Add-in)
CAL
X
REG
Z
OFF
C-A32
PGM
Programming procedure
PGM
RF
Getting Started
This cash register is capable of automatically calculating up to four different sales taxes. The sales tax
calculations are based on rates, so you must tell the cash register the rates, the type of tax (add-in or addon), and the type of rounding to apply. Note that special rounding methods (page 15) are also available to
meet certain local tax requirements.
Important!
Mode Switch
Assign tax table 1. ................................................................................. 6
4
3s
4
0125s
Assigning tax table 2, enter 0225.
Assigning tax table 3, enter 0325.
Assigning tax table 4, enter 0425.
4
Enter tax rate (2 integers and 4 decimals)..
Example:
15% = 15
8.25% = 8^25
.................................................................. 6 : : : : : :a
4
0a
4
Enter rounding method, tax calculation method..
Fraction round up
Fraction round off
Fraction cut off
Always “0”
Add-on tax
Add-in tax
9
5
0
0
0
0
0
2
3
.................................................................. 6
Terminate the procedure.. ...................................................................... 6
D :
D :
D :
D a
:
4
3
2
1
4
s
13
E
Getting Started
11.
Tax table programming (continued…)
Programming tax calculations (with special rounding)
Prepare the following subjects:
1. Tax rates
2. Rounding method for tax calculation (Round up/Round off/Cut off)
3. Tax calculation system (No/Add-on/Add-in)
4. Rounding system (Special rounding 1/Special rounding 2/Special rounding 3/Danish rounding
/Australian rounding) :only effective for Tax Table 1
Programming procedure
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
Mode Switch
Assign tax table 1. ................................................................................. 6
4
3s
4
0125s
Assigning tax table 2, enter 0225.
Assigning tax table 3, enter 0325.
Assigning tax table 4, enter 0425.
4
Enter tax rate (2 integers and 4 decimals)
Example:
15% = 15
8.25% = 8^25
non tax = 0
................................................................ 6 : : : : : :a
4
Enter rounding method, tax calculation method..
0a
Fraction round up
9 0
4
Fraction round off
5 0
Fraction cut off
Special rounding 1 *
Special rounding 2 *
Special rounding 3 *
Special rounding 4 *
Special rounding 5 *
Add-on tax
Add-in tax
* See the next page.
0
0
1
2
6
3
7
2
3
................................................................................... 6
Terminate the procedure. ....................................................................... 6
E
14
D :
D :
D :
D a
:
4
3
2
4
s
1
11.
About special rounding…
Besides cut off, round off and round up, you can also specify “special rounding” for subtotals and totals
or changes. Special rounding converts the right-most digit(s) of an amount to “0” or “5” to comply with
the requirements of certain areas.
Last (right-most) digit
0~2
3~7
8~9
Rounding result
0
5
10
Examples:
2
2
2
Rounding result
0
10
Examples:
2
2
Examples:
2
2
2
Rounding result
0
50
100
1.21
1.26
1.28
➔
➔
➔
1.20
1.25
1.30
1.12
1.55
➔
➔
1.10
1.60
1.24
1.52
1.77
➔
➔
➔
1.00
1.50
2.00
Getting Started
1 Special Rounding 1
2 Special Rounding 2
Last (right-most) digit
0~4
5~9
3 Special Rounding 3
Last (right-most) digits
00 ~ 24
25 ~ 74
75 ~ 99
4 Special Rounding 4 (Danish Rounding)
With Danish rounding, the rounding method applies to subtotals depends on whether you
finalize the transaction by inputting an amount tendered or not.
• When a finalization is performed without
an amount tendered entry
Last (right-most) 2 digits
of subtotal
00 ~ 12
13 ~ 37
38 ~ 62
63 ~ 87
88 ~ 99
Rounding result
2
2
2
2
2
00
25
50
75
100
• When a finalization is performed with
an amount tendered entry
Last (right-most) 2 digits
of change due
00 ~ 12
13 ~ 37
38 ~ 62
63 ~ 87
88 ~ 99
Rounding result
2
2
2
2
2
00
25
50
75
100
5 Special Rounding 5 (Australian Rounding)
Last (right-most) digit
0~2
3~7
8~9
2
2
2
Rounding result
0
5
10
Examples:
1.21
1.26
1.28
➔
➔
➔
1.20
1.25
1.30
• Partial tenders (payments): for Danish Rounding
No rounding is performed for the amount of tendered nor for the change amount due when the customer makes a partial
tender. When a partial tender results in a remaining balance within the range of 1 through 12, the transaction is finalized
as if there was no remaining balance.
• Display and printing of subtotals: for Danish and Australian Rounding
When you press the s key, the unrounded subtotal is printed and shown on the display. If the cash register is also set
up to apply an add-on tax rate, the add-on tax amount is also included in the subtotal that is printed and displayed.
Important!
When you are using Danish rounding, you can use the a key to register tendered amount
in which the last (right-most) digits are 00, 25, 50 or 75. This restriction does not apply to the
h and k keys.
15
E
Getting Started
12.
For Australia only
You can set some programmable options to suit the Australian GST by the following procedure.
CAL
REG
X
Z
6 01012001s 6 6 a (Execution)
OFF
C-A32
PGM
PGM
RF
Mode Switch
E
16
6 s (Cancellation)
After completion of this procedure, the “GST system was changed” message was printed on
receipt and;
1 Tax symbol (*) is printed.
2 Taxable amount is skipped.
3 “GST INCLUDED” is set to the TX1 descriptor.
4 “TAXABLE AMT” is set to the TA1 descriptor.
5 Total line is printed even in direct (cash) sale.
6 Australian rounding is set.
7 “$” is set to the monetary symbol.
8 Print “MOF message” on receipt.
9 Tax (10% tax rate, add-in tax, fraction round off) is set to the tax table 1.
No data is set to other tax tables.
0 The taxable amount and tax amount except TA1/TX1 are not printed on report.
A Restriction (to 0, 5) on last amount digit of cash sales, received on account, paid out,
and money declaration.
Introducing TE-100
General guide
Multipurpose tray
Drawer
Drawer lock
Printer cover
Roll paper
Drawer
You can use the roll paper to print receipts and a
journal (page 9 ~ 10).
The drawer opens automatically whenever you finalize
a registration and whenever you issue a read or reset
report. The drawer will not open if it is locked with the
drawer key.
Receipt On/Off key
When you are using the printer for receipt printer, you
can use this key (in the REG and RF
modes only) to turn the printer on and off.
If a customer asks for a receipt while
RECEIPT
ON/OFF
receipt printing is turned off by this key,
you can issue a post-finalization receipt
(page 43).
Getting Started/Introducing TE-100
This part of the manual introduces you to the cash register and provides a general explanation of its various parts.
display drawer keyboard pop-up display printer cover take-up reel main operator customer
Take-up reel
Pop-up display
(customer display)
Roll paper
Main display
Printer
Mode switch
Keyboard
Drawer lock
Use the drawer key to lock and unlock the drawer.
Multipurpose tray
This tray can always be opened if the locking knob is in
the unlock position.
Use the locking knob to lock and unlock this tray.
Mode key
There are two types of mode keys: the program key
(marked “PGM”) and the operator key (marked “OP”).
The program key can be used to set the mode switch to
any position, while the operator key can select the
REG, CAL and OFF position.
PGM
C-A32
Program
key
OP
C-A02
Operator
key
17
E
Introducing TE-100
Mode switch
Use the mode keys to change the position of the mode switch and select the mode you want to use.
CAL
X
REG
Z
Mode Switch
OFF
RF
PGM
Mode Name
Description
Z
RESET
Reads sales data in memory and clears the data.
X
READ
Reads sales data in memory without clearing the data.
CAL
CALCULATOR
Use this mode for calculator.
REG
REGISTER
Use this mode for normal registration.
OFF
STAND-BY
Cash register standing by.
REFUND
Use this mode to register refund transaction.
PROGRAM
Use this mode for cash register programming.
RF
PGM
Lock/unlock the multipurpose tray
Lock (Red)
Unlock
(Green)
When the cash drawer does not open!
In case of power failure or the machine is in malfunction,
the cash drawer does not open automatically. Even in
these cases, you can open the cash drawer by pulling
drawer release lever (see below).
Important!
The drawer will not open, if it is locked with a drawer lock key.
E
18
Displays
Main Display
(alphanumeric + numeric display)
Pop-up (customer) display
(numeric display)
Item registration (by department/PLU)
alphanumeric display
AMOUNT
!50
RPT
!50
RECEIPT
ON
TOTAL
5
2
CHANGE
1
1
Introducing TE-100
Repeat registration
AMOUNT
3
RPT
"50
3
"50
RECEIPT
ON
TOTAL
3
Totalize operation
2
1
3
CHANGE
1
AMOUNT
_
RPT
1"34
_
1"34
RECEIPT
ON
5
TOTAL
2
1
1 Amount/Quantity
This part of the display shows monetary amounts.
It also can be used to show the current time.
(The current date is shown in the alphanumeric
display.)
2 Item/Key descriptor
When you register an item or key, the item/key
descriptor appears here.
Mode descriptor is also displayed here.
3 Number of repeats
Anytime you perform a repeat registration (page 25,
29), the number of repeats appears here.
5
CHANGE
4
Note that only one digit is displayed for the number
of repeats. This means that a “5” could mean 5, 15 or
even 25 repeats.
4 Total/Change indicators
When the TOTAL indicator is lit, the displayed value
is monetary total or subtotal amount.
When the CHANGE indicator is lit, the displayed
value is the change due.
5 Receipt on/off indicators
When the register is in “issuing receipt” mode,
under-bar sign is lit on this digit. (REG/RF mode,
during standing-by only)
19
E
Introducing TE-100
Keyboard
D
F
E
6
12
18
G
1
2
FEED
4
#
NS
5
%
PRICE
—
17
M
7
8
9
I
4
10
16
J
CH
22
CHK
4
5
6
3
9
15
SUBTOTAL
22
L
X
DATE
TIME
1
2
3
2
8
14
21
0
00
•
1
7
13
19
B
ERR.CORR
CANCEL
PD
MR
K
PLU
RF
H
RC
23
9
0POST A
RECEIPT
EXCHG
CLK#
11
6
8
7
3OPEN
5
C
RECEIPT
ON/OFF
VAT
24
C
C/AC
CA AMT
TEND
• Register Mode
1 Paper feed key f
Hold this key down to feed paper from the printer.
2 Non-add/No sale key B
Non-add key: To print reference number (to identify a
personal check, credit card, etc.) during a transaction, use
this key after some numerical entries.
No sale key: Use this key to open the drawer without
registering anything.
3 Open/Clerk number key o
It is necessary to select one of these functions (page 45).
Open key: Use this key to temporarily release a limitation
on the number of digits that can be input for a unit price.
Clerk number key: Use this key to sign clerk on and off
the register.
4 Percent key p
Use this key to register premiums or discounts.
5 Price key :
Use this key to register unit prices for subdepartment.
6 PLU key +
Use this key to input PLU (subdepartment) numbers.
7 Minus key m
Use this key to input values for subtraction.
8 Refund key R
Use this key to input refund amounts and void certain
entries.
E
20
9 Multiplication/Date/Time key X
Use this key to input a quantity for a multiplication
operation. Between transactions, this key displays the
current time and date.
0 Post receipt/Currency exchange key ;
Post receipt key: Use this key to produce a post-finalization receipt (page 43).
Currency Exchange key: Use this key for calculating
subtotal amounts or paying amount due in foreign currency (page 64).
A Error correct/Cancel key e
Use this key to correct registration errors and to cancel
registration of entire transactions.
B Clear key C
Use this key to clear an entry that has not yet been
registered.
C Ten key pad 0, 1, ~ 9, -, ^
Use these keys to input numbers.
D Department keys &, ', ~ .
Use these keys to register items to departments.
E VAT key v
Use this key to print a VAT breakdown.
Use this key twice to change the status “receipt issue” or
“no receipt.” This key is only effective when the “use
printer for receipt printer” in the printer control program
is selected. In case of “receipt issue”, the “RECEIPT ON”
indicator is lit.
G Received on account key [
Use this key following a numeric entry to register money
received for non-sale transactions.
H Paid out key P
Introducing TE-100
F Receipt on/off key D
• Calculator Mode
2 Drawer open key B
4 Percent key p
B Clear/All clear key C
C Ten key pad 0, 1, ~ 9, -, ^
M Arithmetic operation key &, ', ( and )
G Memory recall key [
L Equal key a
Use this key following a numeric entry to register money
paid out from the drawer.
I Charge key h
Use this key to register a charge sale.
J Check key k
Use this key to register a check tender.
K Subtotal key s
Use this key to display and print the current subtotal
(includes add-on tax) amount.
L Cash amount tendered key a
Use this key to register a cash sale.
21
E
Basic Operations and Setups
How to read the printouts
• The journal and receipts are records of all transactions and operations.
• The contents printed on receipts and journal are identical, except the date printing line. (The date line is printed
on receipts and reports.)
• You can choose the journal skip function (page 44).
If the journal skip function is selected, the cash register will print the total amount of each transaction, and the
details of premium, discount and reduction operations only, without printing department and PLU item registrations on the journal.
• The following items can be skipped on receipts and journal.
• Time
• Consecutive number
• Taxable status
• Taxable amount
Receipt Sample
************************
*
*
*
* THANK YOU *
*— Logo message
**
CALL AGAIN
** or graphic logo
*
*
************************
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *— Commercial message
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *
REG 15-03-2002 12:34
— Mode/Date/Time
CLERK 01
0001-000123— Clerk/Machine No.
-Consecutive No.
DEPT01
T1
•1.00
DEPT02
T1
•2.00
5 X
@1.00
DEPT03
T2
•5.00
TAX-AMT 1
•3.00— Taxable amount
TAX 1
5%
•0.15 with tax rate
TAX-AMT 2
•5.00
TAX 2
4%
•0.20
TAX
•0.35— Tax total
TOTAL
•8.35
CASH
•10.00
CHANGE
•1.65
7 No
— Item counter
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***— Bottom message
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***
Journal Sample
(Item lines Included)
(normal height)
REG
CLERK 01
DEPT01
DEPT02
TAX-AMT 1
TAX 1
TAX
CASH
12:33
0001-000122
T1
•1.00
T1
•2.00
•3.00
•0.15
•0.15
•3.15
2 No
REG
12:34
CLERK 01
0001-000123
DEPT01
T1
•1.00
DEPT02
T1
•2.00
5 X
@1.00
DEPT03
T2
•5.00
TAX-AMT 1
•3.00
TAX 1
5%
•0.15
TAX-AMT 2
•5.00
TAX 2
4%
•0.20
TAX
•0.35
TOTAL
•8.35
CASH
•10.00
CHANGE
•1.65
7 No
REG
12:35
CLERK 01
0001-000124
DEPT01
T1
•1.00
DEPT02
T1
•2.00
5 X
@1.00
DEPT03
T2
•5.00
Journal Sample
(Item lines Skipped)
(half height)
REG
15-03-2002 12:32
CLERK 01
0001-000121
TAX-AMT 1
•3.00
TAX 1
5%
•0.15
TAX
•0.15
•3.15
CA
2 No
REG
15-03-2002 12:33
CLERK 01
0001-000122
TAX-AMT 1
•3.00
TAX 1
5%
•0.15
TAX
•0.15
CASH
•3.15
2 No
REG
15-03-2002 12:34
CLERK 01
0001-000123
TAX-AMT 1
•3.00
TAX 1
5%
•0.15
TAX-AMT 2
•5.00
TAX 2
4%
•0.20
TAX
•0.35
•8.35
TOTAL
CASH
•10.00
CHANGE
•1.65
7 No
REG
15-03-2002 12:35
CLERK 01
0001-000124
TAX-AMT 1
•3.00
TAX 1
5%
0.15
TAX-AMT 2
•5.00
TAX 2
4%
•0.20
In the operation examples contained in this manual, the print samples are what would be produced if the roll paper
is being used for receipts. They are not actual size. Actual receipts are 58 mm wide. Also, all sample receipts and
journals are printout images.
E
22
How to use your cash register
The following describes the general procedure you should use in order to get the most out of your cash register.
BEFORE business hours…
Basic Operations and Setups
• Check to make sure that the cash register is
plugged in securely.
Page 11
• Check to make sure there is enough paper
left on the roll.
Page 9, 10
• Read the financial totals to confirm that they are
all zero.
Page 72
• Check the date and time.
Page 24
DURING business hours…
• Register transactions.
• Periodically read totals.
Page 25
Page 71
AFTER business hours…
•
•
•
•
•
Issue electronic journal report. (if necessary)
Reset the daily totals.
Remove the journal.
Empty the cash drawer and leave it open.
Take the cash and journal to the office.
Page 74
Page 41
Page 83
Page 18
23
E
Basic Operations and Setups
Displaying the time and date
REG
Z
C-A02
X
OP
C-A32
OFF
RF
PGM
You can show the time and date on the display of the
cash register whenever there is no registration being
made.
CAL
PGM
Mode Switch
To display and clear the time and date
OPERATION
DISPLAY
X
Day Month Year
AMOUNT
08-3~
Hour Minutes.
(24-hour system)
RPT RECEIPT
ON
C
AMOUNT
~00
RPT RECEIPT
ON
Preparing coins for change
X
REG
Z
C-A02
CAL
OP
C-A32
OFF
RF
PGM
Mode Switch
Opening the drawer without a sale
OPERATION
RECEIPT
B
REG
#/NS
E
24
15-03-2002 08:35
000001
••••••••••••
PGM
You can use the following procedure to open the drawer
without registering an item. This operation must be
performed out of a sale.
(You can use the [ key instead of the B key. See
page 37.)
Preparing and using department keys
Registering department keys
X
REG
Z
C-A02
CAL
OP
The following examples show how you can use the
department keys in various types of registrations.
C-A32
RF
PGM
OFF
PGM
Mode Switch
Single item sale
OPERATION
Unit price
Item
Quantity
Dept.
Payment
Cash
$1.00
1
1
$1.00
RECEIPT
1Unit price
&
REG
15-03-2002 08:40
— Mode/date/time
000002— Consecutive No.
Department
DEPT01
•1.00— descriptor/unit price
CASH
•1.00— Cash total amount
Department
Basic Operations and Setups
a
Repeat
OPERATION
Unit price
Item
Quantity
Dept.
Payment
Cash
$1.50
3
1
$10.00
150&
&
&
s
10-a
RECEIPT
REG
15-03-2002 08:45
000003
DEPT01
DEPT01
DEPT01
TOTAL
CASH
CHANGE
•1.50
•1.50— Repeat
•1.50— Repeat
•4.50
•10.00
•5.50
Multiplication
OPERATION
Unit price
Quantity
Dept.
Payment
Cash
Item
$1.00
12.5
1
$20.00
12^5X
Quantity
(4-digit integer/2-digit decimal)
1-&
s
20-a
RECEIPT
REG
15-03-2002 08:50
000004
12.5
DEPT01
TOTAL
CASH
CHANGE
X
— Quantity/unit price
@1.00
•12.50
•12.50
•20.00
•7.50
25
E
Basic Operations and Setups
Programming department keys
To program a unit price for each department
To other department
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
Mode Switch
61s6 : : : : : : 6
Unit price
Example:
$1.00 2 100
$10.25 2 1025
{ }
& (Dept.1)
' (Dept.2)
:
. (Dept.24)
6s
$1,234.56 2 123456
To program the tax calculation status for each department
Tax calculation status
This specification defines which tax table should be used for automatic tax calculation.
See page 13 for information on setting up the tax tables.
Programming procedure
Different status to different department
Same status to
different department
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
{
61s 6
[ (Tax table 1)
P (Tax table 2)
k (Tax table 3)
e (Tax table 4)
B (Non tax)
}{
6
& (Dept.1)
' (Dept.2)
:
. (Dept.24)
Mode Switch
Note: Tax symbols
T1: Tax table 1
T2: Tax table 2
T3: Tax table 3
T4: Tax table 4
All departments are initialized as non-tax.
E
26
}
6s
X
REG
Z
C-A02
CAL
OP
Registering department keys by
programming data
C-A32
RF
PGM
OFF
PGM
Preset price
Mode Switch
OPERATION
Unit price
Item
Quantity
Dept.
Payment
Cash
( ): Preset value
RECEIPT
'
a
($1.00)
1
2
$1.00
REG
15-03-2002 08:55
000005
•1.00 — Department
•1.00 descriptor/unit price
DEPT02
CASH
Preset tax status (Add-on tax)
Unit price
Quantity
Item 1
Dept.
Taxable
Unit price
Quantity
Item 2
Dept.
Taxable
Payment
Cash
( ): Preset value
($2.00)
5
3
(1)
($2.00)
1
4
(2)
$20.00
5X
(
)
s
20-a
*
RECEIPT
REG
15-03-2002 09:00
000006
Tax status symbols *
5
X
DEPT03
DEPT04
TAX-AMT 1
TAX 1
TAX-AMT 2
TAX 2
TOTAL
CASH
CHANGE
@2.00
T1
•10.00
T2
•2.00
•10.00 —
•0.50 —
•2.00 —
•0.12 —
•12.62
•20.00
•7.38
Taxable Amount 1
Tax 1
Taxable Amount 2
Tax 2
To print tax status symbols, please refer to page 44.
Preset tax status (Add-in tax)
OPERATION
Unit price
Quantity
Item 1
Dept.
Taxable
Unit price
Quantity
Item 2
Dept.
Taxable
Payment
Cash
( ): Preset value
($2.00)
5
3
(1)
($2.00)
1
4
(2)
$20.00
5X
(
)
s
20-a
*
Basic Operations and Setups
OPERATION
RECEIPT
REG
15-03-2002 09:05
000007
Tax status symbols *
5
DEPT03
DEPT04
TOTAL
CASH
CHANGE
X
@2.00
T1
•10.00
T2
•2.00
•12.00
•20.00
•8.00
To print tax status symbols, please refer to page 44.
27
E
Basic Operations and Setups
Preparing and using PLUs
This section describes how to prepare and use PLUs.
CAUTION:
Before you use PLUs, you should first tell the cash register how it should handle the registration.
Programming PLUs
To program a unit price for each PLU
To a new (not sequential) PLU
Different unit price to the next PLU
CAL
X
REG
Z
Same unit price
to the next PLU
OFF
C-A32
PGM
PGM
RF
6 1s 6 PLU No. +6 : : : : : : 6 a 6 s
(1 to 12-)
Mode Switch
Unit price
Example:
$1.00 2 100
$10.25 2 1025
$1,234.56 2 123456
To program tax calculation status for each PLU
Different status to a new (not sequential) PLU
Same status to a new PLU
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
Mode Switch
E
28
61s 6
{
[ (Tax table 1)
P (Tax table 2)
k (Tax table 3)
e (Tax table 4)
B (Non tax)
Same status
to the next PLU
}
6
PLU No.
6 + 6s
(1 to 12-)
Note: Tax symbols
T1: Tax table 1
T2: Tax table 2
T3: Tax table 3
T4: Tax table 4
All PLUs are initialized as non-tax.
Registering PLUs
REG
Z
C-A32
RF
PGM
Mode Switch
OPERATION
Unit price
Quantity
PLU
Payment
Cash
( ): Preset value
PGM
OFF
PLU single item sale
Item
C-A02
X
OP
The following examples show how you can use PLUs in
various types of registrations.
Registering by subdepartment, see the “Convenient
Operations and Setups” on page 60.
CAL
($2.50)
1
14
$3.00
14
RECEIPT
REG
PLU code
+
s
3-a
15-03-2002 09:10
000008
•2.50— PLU descriptor/
unit price
•2.50
•3.00
•0.50
PLU0014
TOTAL
CASH
CHANGE
OPERATION
Unit price
Item
Quantity
PLU
Payment
Cash
( ): Preset value
($2.50)
3
14
$10.00
14+
+
+
s
10-a
Basic Operations and Setups
PLU repeat
RECEIPT
REG
15-03-2002 09:15
000009
PLU0014
PLU0014
PLU0014
TOTAL
CASH
CHANGE
•2.50
•2.50
•2.50
•7.50
•10.00
•2.50
PLU multiplication
OPERATION
Unit price
Item
Quantity
PLU
Payment
Cash
( ): Preset value
($1.20)
15
2
$20.00
15X
Quantity
(4-digit integer/2-digit decimal)
2+
s
20-a
RECEIPT
REG
15-03-2002 09:20
000010
15
PLU0002
TOTAL
CASH
CHANGE
X
@1.20
•18.00
•18.00
•20.00
•2.00
29
E
Basic Operations and Setups
Preparing and using discounts
This section describes how to prepare and register discount.
Programming discounts
You can use the p key to register discounts (percentage decreases). The more detailed informations about the
discount (and premium) are described in the “Registering discounts and premiums” section in the “Convenient
Operations and setups” on page 63.
To program a rate to the p key
CAL
X
REG
Z
6 1s 6 : : : : 6 p 6 s
OFF
C-A32
PGM
PGM
RF
Mode Switch
Preset rate
Example:
10% 2 10
5.5% 2 5^5
12.34% 2 12^34
To program tax status to the p key
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
Mode Switch
E
30
[ (Tax table 1) P (Tax table 2)
k (Tax table 3) e (Tax table 4)
6 1s 6 [P
(Tax table 1, 2, 3 and 4)
ke
B (Non tax)
{
Note: Tax symbols
T1: Tax table 1
T2: Tax table 2
T3: Tax table 3
T4: Tax table 4
*:
Tax table 1, 2, 3 and 4
p is initialized as non-tax.
}
6 p6 s
Registering discounts
REG
Z
C-A02
X
OP
C-A32
OFF
RF
PGM
The following example shows how you can use the p
key in various types of registration.
CAL
PGM
Mode Switch
Discount for items and subtotals
OPERATION
5-&
16+
p
Applies the preset discount
rate to the last item registered.
s
3^5p
The input value takes priority
of the preset value.
REG
15-03-2002 10:30
000013
DEPT01
PLU0016
5%
%
ST
3.5%
%
TOTAL
CASH
CHANGE
•5.00
•10.00
-0.50
•14.50
-0.51
•13.99
•15.00
•1.01
s
15-a
• You can manually input rates up to 4 digits long (0.01% to 99.99%).
Taxable status of the p key
• Whenever you perform a discount operation on the last item registered, the tax calculation for discount amount
is performed in accordance with the tax status programmed for that item.
• Whenever you perform a discount operation on a subtotal amount, the tax calculation for the subtotal
amount is performed in accordance with the tax status programmed for the p key.
31
Basic Operations and Setups
Unit price
$5.00
Quantity
1
Dept.
1
Unit price ($10.00)
Item 2 Quantity
1
PLU
16
Discount
Rate
(5%)
Subtotal
Rate
3.5%
Discount
Payment
Cash
$15.00
( ): Preset value
Item 1
RECEIPT
E
Basic Operations and Setups
Preparing and using reductions
This section describes how to prepare and register reductions.
Programming for reductions
You can use the m key to reduce single item or subtotal amounts. The following procedure lets you
program the tax calculation method for the m key.
To program tax calculation status
CAL
X
REG
Z
OFF
C-A32
PGM
PGM
RF
[ (Tax table 1) P (Tax table 2)
k (Tax table 3) e (Tax table 4)
61s 6 [P (Tax table 1, 2, 3 and 4)
ke
B (Non tax)
{
}
6 m 6s
Note: Tax symbols
T1: Tax table 1
T2: Tax table 2
T3: Tax table 3
T4: Tax table 4
*:
Tax table 1, 2, 3 and 4
m is initialized as non-tax.
Mode Switch
Taxable status of the m key
The tax calculation for the reduction amount is performed in accordance with the tax status programmed for the
m key, regardless of whether the reduction is performed on the last item registered or a subtotal amount.
To program preset reduction amount
CAL
X
REG
Z
6 1s 6 : : : : : : 6m 6 s
OFF
C-A32
PGM
PGM
RF
Mode Switch
E
32
Unit price
Example:
$1.00 2 100
$10.25 2 1025
$1,234.56 2 123456
Registering reductions
REG
Z
C-A02
X
OP
C-A32
OFF
RF
PGM
The following examples show how you can use the m
key in various types of registration.
CAL
PGM
Mode Switch
Reduction for items
OPERATION
$5.00
1
1
$0.25
($6.00)
1
45
($0.50)
$11.00
5-&
25m
Reduces the last amount
registered by the value input.
45+
m
s
11-a
REG
15-03-2002 10:35
000014
DEPT01
PLU0045
TOTAL
CASH
CHANGE
•5.00
-0.25
•6.00
-0.50
•10.25
•11.00
•0.75
Basic Operations and Setups
Unit price
Quantity
Dept.
Reduction Amount
Unit price
Item 2 Quantity
PLU
Reduction Amount
Payment
Cash
( ): Preset value
Item 1
RECEIPT
• You can manually input reduction values up to 7 digits long.
• The amount you input for the reduction is neither subtracted from the department nor PLU totalizer.
Reduction for subtotal
OPERATION
Unit price
Item 1 Quantity
Dept.
Unit price
Item 2 Quantity
Dept.
Subtotal
Reduction Amount
Payment
Cash
$3.00
1
1
$4.00
1
2
3-&
4-'
s
75m
$0.75
Reduces the subtotal by the
value input here.
$7.00
RECEIPT
REG
15-03-2002 10:40
000015
DEPT01
DEPT02
TOTAL
CASH
CHANGE
•3.00
•4.00
-0.75
•6.25
•7.00
•0.75
s
7-a
33
E
Basic Operations and Setups
Registering charge and check payments
X
REG
Z
C-A02
CAL
OP
The following examples show how to register charges
and payments by check.
C-A32
RF
PGM
OFF
PGM
Mode Switch
Check
OPERATION
Unit price
Quantity
Dept.
Payment Check
Item
$10.00
1
1
$10.00
10-&
s
10-k
RECEIPT
REG
15-03-2002 10:50
000018
DEPT01
TOTAL
CHECK
CHANGE
•10.00
•10.00
•10.00
•0.00
Charge
OPERATION
Unit price
Quantity
Dept.
Reference Number
Payment Charge
Item
$15.00
1
4
0123
$15.00
15-)
s
0123B
h
RECEIPT
REG
15-03-2002 10:55
000019
DEPT04
#/NS
CHARGE
•15.00
0123— Reference No.
•15.00
Mixed tender (cash, charge and check)
OPERATION
Unit price
Item
Quantity
Dept.
Check
Payment
Cash
Charge
E
34
$55.00
1
4
$30.00
$5.00
$20.00
55-)
s
30-k
5-a
h
RECEIPT
REG
15-03-2002 11:00
000020
DEPT04
TOTAL
CHECK
CASH
CHARGE
•55.00
•55.00
•30.00
•5.00
•20.00
Registering returned goods in the REG mode
X
REG
Z
C-A02
CAL
OP
The following example shows how to use the R key in
the REG mode to register goods returned by customers.
C-A32
RF
PGM
OFF
PGM
Mode Switch
OPERATION
$2.35
1
1
$2.00
1
2
($1.20)
1
1
$2.35
1
1
($1.20)
1
1
$2.00
235&
2-'
1+
R
235&
Pressing R specifies that the
next item registered is a return.
REG
15-03-2002 11:05
000021
DEPT01
DEPT02
PLU0001
REFUND
DEPT01
REFUND
PLU0001
CASH
•2.35
•2.00
•1.20
••••••••••••
-2.35
••••••••••••
-1.20
•2.00
Basic Operations and Setups
Unit price
Quantity
Dept.
Unit price
Item 2 Quantity
Dept.
Unit price
Item 3 Quantity
PLU
Unit price
Item 1
Quantity
Returned
Dept.
Unit price
Item 3
Quantity
Returned
PLU
Payment
Cash
( ): Preset value
Item 1
RECEIPT
R
1+
You have to press R before
registering each returned item.
s
a
35
E
Basic Operations and Setups
Registering returned goods in the RF mode
The following examples show how to use the RF mode to
register goods returned by customers.
REG
Z
C-A32
X
OFF
PGM
CAL
RF
PGM
Mode Switch
Normal refund transaction
OPERATION
RECEIPT
RF mode symbol
Unit price
Item 1
Quantity
Returned
Dept.
Unit price
Item 2
Quantity
Returned
PLU
Payment
Cash
( ): Preset value
$1.50
2
1
($1.20)
6
2
$10.20
150&
&
6X
2+
s
a
RF
15-03-2002 11:10
000022
DEPT01
DEPT01
6
PLU0002
CASH
X
•1.50
•1.50
@1.20
•7.20
•10.20
Reduction of amounts paid on refund
OPERATION
RECEIPT
RF mode symbol
Unit price
Item 1
Quantity
Returned
Dept.
Reduction Amount
Unit price
Item 2
Quantity
Returned
PLU
Discount
Rate
Payment
Cash
( ): Preset value
$4.00
1
3
$0.15
($1.20)
1
2
(5%)
$4.99
4-(
15m
2+
p
s
a
RF
15-03-2002 11:15
000023
DEPT03
PLU0002
5%
%
CASH
•4.00
-0.15
•1.20
-0.06
•4.99
Important!
To avoid miss registrations in the RF mode, return the mode switch to the former position immediately.
E
36
Registering money received on account
X
REG
Z
C-A02
CAL
OP
The following example shows how to register money
received on account. This registration must be performed
out of a sale.
C-A32
C-A32
PGM
RF
PGM
OFF
PGM
Mode Switch
OPERATION
Received amount
$700.00
RECEIPT
7--[
REG
15-03-2002 11:20
000024
Amount can be up to 8 digits.
•700.00
Basic Operations and Setups
RC
Registering money paid out
X
REG
Z
C-A02
CAL
OP
The following example shows how to register money
paid out from the register. This registration must be
performed out of a sale.
OFF
RF
PGM
Mode Switch
OPERATION
Paid out amount
$1.50
150P
Amount can be up to 8 digits.
RECEIPT
REG
PD
15-03-2002 11:30
000025
•1.50
37
E
Basic Operations and Setups
Making corrections in a registration
X
REG
Z
C-A02
CAL
OP
C-A32
OFF
RF
PGM
Mode Switch
To correct an item you input but not yet registered
OPERATION
2—
C
—
1-&
—
12X
—
C
11X —
2-'
—
2
—
C
—
3+
—
15+
—
6C
15+ —
Enter subdepartment No. again.
RECEIPT
REG
Correction of unit price
Correction of quantity
15-03-2002 11:35
000026
DEPT01
11
DEPT02
PLU0003
PLU0015
TOTAL
CASH
CHARGE
Correction of PLU No.
Correction of subdepartment unit price
(See page 60 for registering.)
10-:
—
s
10—
C
— Correction of partial tender amount
15-a
—
h
E
38
X
•1.00
@2.00
•22.00
•1.30
•10.00
•34.30
•15.00
•19.30
PGM
There are three techniques you can use to make
corrections in a registration.
• To correct an item that you input but not yet registered.
• To correct the last item you input and registered.
• To cancel all items in a transaction.
To correct the last item you input and registered
1-&
2-'
'—
—
e—
2+ —
e —
5+ —
15+ —
6-:
e —
15+
10-: —
8X —
4-)
e —
6X
4-) —
s—
50p
e —
s
5p —
R2-' —
e —
R220' —
s
20-a —
e —
15-a —
h
RECEIPT
REG
Clearance
Correction of PLU No.
Correction of subdepartment unit price
Correction of quantity
15-03-2002 11:40
000027
DEPT01
DEPT02
DEPT02
ERR CORR
PLU0002
ERR CORR
PLU0005
PLU0015
ERR CORR
PLU0015
8 X
DEPT04
ERR CORR
6 X
DEPT04
ST
50%
%
ERR CORR
ST
5%
%
REFUND
DEPT02
ERR CORR
REFUND
DEPT02
TOTAL
CASH
ERR CORR
CASH
CHARGE
•1.00
•2.00
•2.00
-2.00
•1.20
-1.20
•1.50
•6.00
-6.00
•10.00
@4.00
•32.00
-32.00
@4.00
•24.00
•38.50
-19.25
•19.25
•38.50
-1.93
••••••••••••
-2.00
•2.00
••••••••••••
-2.20
•34.37
•20.00
-20.00
•15.00
•19.37
Basic Operations and Setups
OPERATION
Correction of discount
Correction of refund item
Correction of partial tender
39
E
Basic Operations and Setups
To cancel all items in a transaction
OPERATION
RECEIPT
1-&
2-'
3-(
4-)
s
REG
15-03-2002 11:45
000028
DEPT01
DEPT02
DEPT03
DEPT04
CANCEL TTL
•1.00
•2.00
•3.00
•4.00
••••••••••••
Pressing s key is necessary to cancel
the transaction.
e
Important!
• Note that the number of items included in the transaction to be cancelled is limited (24 ~ 40
items), depending on the complexity of the transaction. If you try to cancel a transaction that
exceeds the limit, an error occurs.
In case of occurrence of this error, register these items in the RF mode.
• You can program the cash register that this cancel operation is not allowed.
No sale registration
X
REG
Z
C-A02
CAL
OP
You can use the following procedure to open the drawer
without registering a sale. This operation must be
performed out of a sale.
C-A32
RF
PGM
Mode Switch
OPERATION
RECEIPT
B
REG
#/NS
E
40
15-03-2002 11:50
000029
••••••••••••
PGM
OFF
Printing the daily sales reset report
This report shows daily sales totals.
OPERATION
Z
OFF
RF
PGM
Mode Switch
8
a
*1
*2
*3
— Reset mode/date/time
15-03-2002 12:00
000030— Consecutive No.
Z 0001— Report code/report title/reset symbol/
reset counter
*1
DEPT01
QT
15— Department descriptor/No. of items
*1
—
Department
amount
•339.50
DEPT02
QT
19
•62.70
DEPT03
QT
31
•139.10
DEPT04
QT
23
•332.67
NON-LINK DPT QT
10— Non-link department No. of items
•94.90— Non-link department amount
-----------------------GROSS TOTAL
QT
253— Gross No. of items
•1146.90— Gross sales amount
NET TOTAL
No
100— No. of customers
•1217.63— Net sales amount
CASH-INDW
•903.06— Cash in drawer amount
CHARGE-INDW
•197.17— Charge in drawer amount
CHECK-INDW
•183.60— Check in drawer amount
*2
TAX-AMT 1
•732.56— Taxable amount 1
*2
TAX 1
•43.96— Tax amount 1
*2
TAX-AMT 2
•409.72— Taxable amount 2
*2
—
Tax
amount
2
TAX 2
•21.55
*2
TAX-AMT 3
•272.50— Taxable amount 3
*2
TAX 3
•8.18— Tax amount 3
ROUNDING AMT
•4.75— Rounding amount (Australia only)
CANCEL TTL
No
2— Cancellation count
•108.52— Cancellation amount
*3
RF-MODE TTL
No
2— Refund mode operation count
*3
•3.74— Refund mode operation amount
-----------------------CASH
No
81— Cash sales count
•836.86— Cash sales amount
CHARGE
No
10— Charge sales count
•197.17— Charge sales amount
CHECK
No
9— Check sales count
•183.60— Check sales amount
RC
No
2— Received on Account count
•78.00— Received on Account amount
PD
No
1— Paid out count
•6.80— Paid out amount
No
8— Subtraction count
•3.00— Subtraction amount
%
No
10— Discount count
•4.62— Discount amount
*3
REFUND
No
7— Refund key count
*3
—
Refund
key
amount
•27.79
ERR CORR
No
10— Error correction count
•12.76— Error correction amount
#/NS
No
5— No sale count
-----------------------*3
GRND TTL •0000001217.63— Non-resettable grand-sales total
0000 DAILY
Basic Operations and Setups
REG
Z
C-A32
X
PGM
CAL
REPORT
Zero totalled departments (the amount and item numbers are both zero) are not printed.
Taxable amount and tax amount are printed only if the corresponding tax table is programmed.
These items can be skipped by programming.
41
E
Convenient Operations and Setups
This section describes more sophisticated setups and operations that you can use to suit the needs of your retail
environment.
Clerk control function
Clerk name printing on receipt/journal, and sales amounts summing by clerk.
REG /RF/
CAL / X / Z
Clerk sign on and sign off
Any time you begin any registration, clerk sign on operation is necessary.
Mode Switch
Clerk sign on
OPERATION
Signing clerk 1 on:
REG 15-03-2002 12:34
CLERK 01
000123— Clerk name/consecutive No.
DEPT01
DEPT02
○
○
Signing clerk 2 on:
1 6 o
2 6 o
RECEIPT
○
5
Signing clerk 10 on:
10 6 o
DEPT03
X
•1.00
•2.00
@1.00
•5.00
Clerk sign off
OPERATION
Signing clerk off:
0 6 o
• The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!
• The error code “E08” appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
• The signed on clerk is also identified on the receipt/journal.
Changing OPEN key to CLK-# key
Refer to the “Programming compulsory and clerk control function” section on page 45.
E
42
Post-finalization receipt format,
General printing control,
Compulsory, Machine features
About post-finalization receipt
The post-finalization receipt lets you issue a receipt after finalization of the transaction.
Note that all of the following conditions must be satisfied.
• The option “print receipts” is selected.
• The receipt issuance status must be OFF.
• The transaction must be finalized in the REG or RF mode using the a, h or k key.
Post-finalization receipt example
You can program the cash register to print the transaction total only (below Total
format) or full details (below Detailed format) on the post-finalization receipt.
Note that if the transaction contains more than 45 lines (including receipt header),
the cash register prints in a Total format regardless of your programming.
Unit price
Item 1 Quantity
Dept.
Unit price
Item 2 Quantity
Dept.
Payment
Cash
$10.00
1
1
$20.00
1
2
$30.00
Mode Switch
RECEIPT
10-&
20-'
s
30-a
;
Convenient Operations and Setups
OPERATION
REG
Receipt is not issued.
Post-finalization receipt is issued.
If “Automatic issue” is selected, no need to press ; key.
Total format
Detailed format
REG 15-03-2002 12:35
CLERK 01
000123
REG 15-03-2002 12:35
CLERK 01
000123
CASH
DEPT01
DEPT02
TOTAL
CASH
CHANGE
•30.00
•10.00
•20.00
•30.00
•30.00
•0.00
Important!
• You can issue only one post-finalization receipt per transaction.
43
E
Convenient Operations and Setups
Programming general printing control
Suppress printing of the subtotal line during tender operation.
a
No = 0
Yes = 1
Print the total line even if no tender operation is made.
b
No = 0
Yes = 2
Print tax total. (only for Australia)
c
No = 0
Yes = 4
Print the current time.
a
Yes = 0
No = 1
Skip the date on journal.
b
Yes = 0
No = 2
Skip the consecutive number.
c
No = 0
Yes = 4
Print receipt/Print journal.
a
Receipt = 0
Journal = 1
Issue post receipt by Finalize key (automatic issue)/
Post receipt key (manual issue)
b
Manual = 0
Automatic = 2
Detail format/Total format in the post receipt
c
Detail = 0
Total = 4
Print taxable amount.
a
Yes = 0
No = 1
Print tax symbols.
b
Yes = 0
No = 2
Print number of item sold.
c
No = 0
Yes = 4
Skip item lines on journal. (journal skip)
a
No = 0
Yes = 1
Print subtotal when the key is pressed.
b
No = 0
Yes = 2
1=0
2=4
Time system:
1 24 hour system, 2 12 hour system
c
Digit separator symbol.
a
Comma = 0
Period = 1
Decimal symbol.
b
Period = 0
Comma = 2
Journal compressed print (print by half height characters)
c
Yes = 0
No = 4
Print hyphens before finalizing a transaction.
a
No = 0
Yes = 1
Print tax total on receipt and report.
b
No = 0
Yes = 2
Print Australian GST MOF message.
a
No = 0
Yes = 1
Print receipt by double height characters.
b
No = 0
Yes = 2
a+b+c =
:D
a+b+c =
:D
a+b+c =
:D
a+b+c =
:D
a+b+c =
:D
a+b+c =
:D
a+b =
:D
a+b =
:D
8
7
6
5
4
3
2
1
63s 6 0522s 6
PGM
Mode Switch
6 :::::::: a 6 s
D8
E
44
D7
D6
D5
D4
D3
D2 D1
Programming compulsory and clerk control function
Force s operation before finalization.
a
No = 0
Yes = 2
Force a money declaration before allowing a daily read/reset
and financial read operation.
b
No = 0
Yes = 4
a+b =
:D
8
;;D D
:D
Always “00”
7
Multiplication procedure;
1 Quantity × amount, 2 Amount × quantity
1=0
2=2
Clear the key buffer when a receipt is issued.
a
No = 0
Yes = 1
Perform auto sign-off when a receipt/report is issued.
b
No = 0
Yes = 2
c
No = 0
Yes = 4
Restriction (to 0, 5) on last amount digit of cash sales, received on
account, paid out and money declaration (only for Australia)
6
5
Display “seconds” during time display.
No = 0
Yes = 2
Reset the consecutive number when the daily reset report
is issued.
a
Yes = 0
No = 1
Prohibit cancel operation.
b
No = 0
Yes = 2
Assign – as “00” or “000”.
a
“00” = 0
“000” = 1
Assign o as “OPEN” or “CLK-#”.
b
“OPEN” = 0
“CLK-#” = 4
a+b+c =
:D
4
:D
3
a+b =
:D
a+b =
:D
2
1
Convenient Operations and Setups
63s 6 0622s 6
PGM
Mode Switch
6 :;;::::: a 6 s
D8
D7
D6
D5
D4
D3
D2 D1
45
E
Convenient Operations and Setups
Programming read/reset report printing control
Recording method of electronic journal memory:
1 Superscribe old data, 2 Append to old data
a
1=0
2=1
Print the first and the last consecutive number of the day
(consecutive No. range) on the daily sales reset report.
b
No = 0
Yes = 4
Skip zero total lines on department and transaction read/reset report.
a
Yes = 0
No = 1
Skip zero total lines on PLU read/reset report.
b
Yes = 0
No = 2
Skip zero total lines on hourly sales report.
c
Yes = 0
No = 4
Print the sales ratio on read/reset report.
a
No = 0
Yes = 1
Suppress printing of the non-resettable grand total on the daily reset
report.
b
No = 0
Yes = 2
Suppress printing of RF total and count (both RF mode and RF key)
on the read/reset report.
a
No = 0
Yes = 1
Print tax rate with tax totalizer.
b
No = 0
Yes = 2
a+b =
:D
a+b+c =
:D
a+b =
:D
a+b =
:D
6
5
4
3
;;D D
Always “00”
2
1
63s 6 0822s 6
PGM
Mode Switch
6 ::::;; a 6 s
D6
D5
D4
D3
D2
D1
Setting a store/machine number
You can set a 4-digit machine number to identify your machine. The machine number is printed on receipts/journal
for each transaction.
63s 6 0222s 6 : : : : a 6 s
PGM
Mode Switch
D4
5
DEPT03
46
D2
D1
— Mode/date/time
REG 15-03-2002 12:34
CLERK 01
0001-000123— Clerk/machine No./consecutive No.
DEPT01
DEPT02
E
D3
X
•1.00
•2.00
@1.00
•5.00
Programming to clerk
You can program up to 4-digit assigning number (clerk number) and trainee status of clerk (i.e. training cashier) for
each clerk.
Important!
This program is required only when the o key is assigned as “CLK#” by the key program on
page 45.
Programming clerk number
To other clerk
Clerk No.
PGM
{ }
6 3s 6
1
07 s
6 :::: a 6 s
10
Clerk number
Programming trainee status of clerk
To other clerk
To the next clerk
Clerk No.
PGM
{ }
1
6 3s6
10
Mode Switch
67s
6
{ }
Training clerk:
1
Normal clerk:
0
a 6s
When a training clerk signs on, the cash register automatically enters the training mode.
In the training mode, no operations are affected on any totalizers nor counters.
The training mode symbols are printed in the columns of receipt entries produced in the training mode.
The cash register exits the training mode when the training clerk signs off.
47
Convenient Operations and Setups
Mode Switch
E
Convenient Operations and Setups
Programming descriptors and messages
The following descriptors and messages can be programmed;
• Report descriptor (such as gross total, net total, cash in drawer…)
• Grand total
• Special character (such as mode symbol, taxable symbol…)
• Read/reset report title
• Messages (Logo, commercial and bottom message)
• Clerk name
• Function key descriptor
• PLU item descriptor
• Department key descriptor
Programming report descriptor, grand total, special character, report title,
receipt message and clerk name
To other program code
To the next memory No.
PGM
62s 6 : : : : s 6
Memory
code
Mode Switch
Program
code
Characters
6 a 6s
☞ See “Entering characters” section,
on page 53.
Report descriptor
Memory
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
E
48
Program
code
01
Contents
Gross total
Net total
Cash in drawer
Charge in drawer
Check in drawer
not used
Foreign currency cash in drawer
Foreign currency check in drawer
not used
not used
Taxable amount 1
Tax 1
Taxable amount 2
Tax 2
Taxable amount 3
Tax 3
Taxable amount 4
Tax 4
not used
not used
not used
Rounding
Cancellation total
Refund mode total
not used
not used
Calculator mode count
Non-link department total
Initial character
GROSS TOTAL
NET TOTAL
CASH-INDW
CHARGE-INDW
CHECK-INDW
CE-CASH 1
CE-CHECK 1
TAX-AMT
TAX 1
TAX-AMT
TAX 2
TAX-AMT
TAX 3
TAX-AMT
TAX 4
1
2
3
4
ROUNDING AMT
CANCEL TTL
RF-MODE TTL
CALCULATOR
NON-LINK DPT
Yours
Grand total, special character
Program
code
20
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
23
Contents
Initial character
Yours
GRND TTL
• @NoQT
$ @NoQT
NoCT
X /
T1T2T3T4 ‹
* T2T3T4 ‹
*
* *
REG RF
PGM n (n=1~ 6)
X
Z
CAL
****
********
TOTAL
CHANGE
Grand total
Amount/@/No./Quantity (2 each)
Amount/@/No./Quantity (Australian GST) (2 each)
Item count/Customer (2 each)
Multiplication/Split pricing (2 each)
Taxable status 1 ~ 4 (2 each)
Taxable status 1 (Australian GST) (2 each)
All taxable status
Foreign currency symbol (2 each)
REG mode/Refund mode (4 each)
not used (4)/Program mode (3)
X/Z mode (4 each)
CAL mode (4)
Training mode
Training symbol
Total symbol (Tendering)
Change symbol
not used
Total symbol (Post receipt)
Total symbol (% registration)
AM, PM (3 each)
Tax total
Auto-program data sending
Auto-program data receiving
Auto-program
Auto-program normal end message
Auto-program error end message
Auto-program forced end message
Total message on report
TOTAL
ST
AM PM
TAX
SEND PGM
RECV PGM
PGM
END
ERROR
**END**
TOTAL
Convenient Operations and Setups
Memory
No.
01
Report title
Memory
No.
01
02
03
04
05
06
07
08
09
10
11
12
Program
code
24
Contents
Initial character
Daily report title
PLU report title
Hourly sales report title
Group report title
Not used
Financial report title
Monthly report title
Periodic-1 report title
Periodic-2 report title
Individual report title
Not used
Electronic journal report title
DAILY
PLU
HOURLY
GROUP
CLERK
FLASH
Contents
Initial character
Yours
MONTHLY
PERIODIC-1
PERIODIC-2
E-JOURNAL
Clerk name
Memory
No.
01
02
03
04
05
10
Program
code
07
Clerk 01
Clerk 02
Clerk 03
Clerk 04
Clerk 09
Clerk 10
CLERK
CLERK
CLERK
CLERK
CLERK
CLERK
Yours
01
02
03
04
05
10
49
E
Convenient Operations and Setups
Receipt message
Refer to “Programming receipt message/logo stamp control function” on page 52.
Memory
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Program
code
32
Contents
Initial character
1st line of logo message
2nd line of logo message
3rd line of logo message
4th line of logo message
5th line of logo message
6th line of logo message
1st line of commercial message
2nd line of commercial message
3rd line of commercial message
4th line of commercial message
5th line of commercial message
1st line of bottom message
2nd line of bottom message
3rd line of bottom message
4th line of bottom message
5th line of bottom message
1st line of Australian MOF msg.
2nd line of Australian MOF msg.
3rd line of Australian MOF msg.
Yours
YOUR RECEIPT
THANK YOU
CALL AGAIN
TAX INVOICE
* INDICATES
TAXABLE SUPPLY
Programming department key descriptor
To other department
62s 6
PGM
Characters
6 -6
☞ See “Entering characters” section,
on page 53.
Mode Switch
Contents
Department 01
Department 02
Department 03
Department 04
Department 05
Department 06
Department 07
Department 08
Department 09
Department 10
Department 11
Department 12
Department 13
Department 14
Department 15
Department 16
Department 17
Department 23
Department 24
E
50
Initial character
DEPT01
DEPT02
DEPT03
DEPT04
DEPT05
DEPT06
DEPT07
DEPT08
DEPT09
DEPT10
DEPT11
DEPT12
DEPT13
DEPT14
DEPT15
DEPT16
DEPT17
DEPT23
DEPT24
Yours
{ }
& (Dept.1)
' (Dept.2)
6s
:
. (Dept.24)
Programming PLU descriptor
To a new (not sequential) PLU
To the next PLU
62s 6
PLU No.
Contents
PLU001
PLU002
PLU003
PLU004
PLU005
PLU006
PLU007
PLU008
PLU009
PLU010
PLU011
PLU012
PLU013
PLU014
PLU015
PLU016
PLU017
PLU018
PLU019
PLU020
PLU021
PLU022
PLU023
PLU024
PLU025
PLU026
PLU027
PLU028
PLU029
PLU030
PLU031
PLU032
PLU033
PLU034
PLU035
PLU036
PLU037
PLU038
PLU039
PLU1198
PLU1199
PLU1200
Characters
a6 s
☞ See “Entering characters” section,
Mode Switch
PLU No.
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
1198
1199
1200
+ 6
on page 53.
Initial character
PLU0001
PLU0002
PLU0003
PLU0004
PLU0005
PLU0006
PLU0007
PLU0008
PLU0009
PLU0010
PLU0011
PLU0012
PLU0013
PLU0014
PLU0015
PLU0016
PLU0017
PLU0018
PLU0019
PLU0020
PLU0021
PLU0022
PLU0023
PLU0024
PLU0025
PLU0026
PLU0027
PLU0028
PLU0029
PLU0030
PLU0031
PLU0032
PLU0033
PLU0034
PLU0035
PLU0036
PLU0037
PLU0038
PLU0039
PLU1198
PLU1199
PLU1200
Yours
Convenient Operations and Setups
PGM
51
E
Convenient Operations and Setups
Programming function key descriptor
To other function key
PGM
62s 6
6- 6
Characters
6s
Function key
☞ See “Entering characters” section,
Mode Switch
on page 53.
Contents
Cash/amount tendered
Charge
Check
Received on account
Paid out
Minus
Discount
Refund
Error correct/Cancel
Non-add/No sale
Post receipt/Currency exchange
VAT
Price
Open/Clerk No.
Subtotal
Receipt on/off
Multiplication/Date time
Initial character
CASH
CHARGE
CHECK
RC
PD
%
REFUND
ERR CORR
#/NS
CURR EXG
VAT
PRICE
OPEN
TL
R ON/OFF
X
Yours
Programming receipt message/logo stamp control function
1 Print graphic logo (electronic logo stamp), 2 Logo message
a
1=0
2=1
Print commercial message.
b
No = 0
Yes = 2
c
No = 0
Yes = 4
Print bottom message.
a+b+c =
:D
8
; ~ ; D ~D
Always “0000000”
7
63s 6 2122s 6
PGM
Mode Switch
6 :;;;;;;; a 6 s
D8
E
52
D7
D6
D5
D4
D3
D2 D1
1
Entering characters
In this section, the method to enter descriptors or messages (characters) to the cash register during programming is
described.
Characters are specified by character keyboard or by codes. In the first half of this section, the usage of character
keyboard is described. In the latter half, inputting method by character code is described.
Using character keyboard
2
A
G
7
7
FEED
2
1
3
4
6
8
DBL
SIZE
2
4
8
9
M
6
S
3
W
3
PLU
7
5
9
5
0
4
1
2
8
6
SPACE
5
C
0
9
00
1 Feed key
Hold this key down to feed paper from the printer.
2 Alphabet keys
Used input to characters.
3 PLU key
Use this key to input PLU numbers.
4 Double size letter key
Specifies that the next character you input to a double size
character. You must press this key before each double size
character.
5 Space key
Set a space by depression.
6 Clear key
Clears all input characters in the programming.
7 Numeric keys
Used to enter program codes, memory number and
character codes.
N
m
T
s
X
w
0
•
H
g
b
h
n
t
x
C
I
O
U
Y
c
i
o
u
y
D
J
P
V
Z
E
d
K
j
Q
p
e
k
q
F
L
R
f
l
r
B
#-2
v
C
z
#-1
A
CAPS
SHIFT
8 Character fixed key
Enter when the alphabetic entry for a descriptor, name or
message has been completed.
9 Backspace/Character code fixed key
Registers one character with code (2 or 3 digits).
Clears the last input character, much like a back space
key.
0 CAPS key
Pressing this key shifts the character from the lowercase
letter to upper case letter.
A Shift key
Pressing this key shifts the character from the uppercase
letter to lower case letter.
B Program end key
Convenient Operations and Setups
1
B
a
Terminates the character programming.
C Character enter key
Registers the programmed characters.
Example:
Input “
A
p
p l e
J
u
i
c e ”,
enter “DBL SIZE”, “A”, “SHIFT”, “p”, “p”, “l”, “e”, “SPACE”, “CAPS”, “J”, “SHIFT”, “u”, “i”, “c”, “e” .
53
E
Convenient Operations and Setups
Entering characters by code
Every time you enter a character, choose character codes by the character code list (below) and press the ^ key to
settle it.
Example:
Input “
A
p
p
l
e
J
u
i
c
e
”,
enter “ 255^65^ 112^ 112^ 108^ 101^ 32^ 74^ 117^ 105^ 99^ 101^ ”.
Character code list
Chara
Code
Chara
Space
32
0
Code Chara
48
!
Code
Chara
Code
Chara
Code
Chara
Code
@
64
P
80
'
96
p
112
Ç
128
33
1
49
A
65
Q
81
a
97
q
113
ü
129
"
34
2
50
B
66
R
82
b
98
r
114
é
130
#
35
3
51
C
67
S
83
c
99
s
115
â
131
$
36
4
52
D
68
T
84
d
100
t
116
ä
132
%
37
5
53
E
69
U
85
e
101
u
117
à
133
&
38
6
54
F
70
V
86
f
102
v
118
å
134
'
39
7
55
G
71
W
87
g
103
w
119
ç
135
(
40
8
56
H
72
X
88
h
104
x
120
ê
136
)
41
9
57
I
73
Y
89
i
105
y
121
ë
137
*
42
:
58
J
74
Z
90
j
106
z
122
è
138
+
43
;
59
K
75
[
91
k
107
{
123
ï
139
,
44
<
60
L
76
\
92
l
108
|
124
î
140
-
45
=
61
M
77
]
93
m
109
}
125
ì
141
.
46
>
62
N
78
^
94
n
110
~
126
Ä
142
/
47
?
63
O
79
_
95
o
111
127
Å
143
Chara
Code
Chara
Code
Chara
Code
Chara
Code
Chara
Code
Chara
Code
É
144
á
208
Ó
224
-
240
æ
145
í
161
177
193
209
ß
225
±
241
Æ
146
ó
162
178
194
Ê
210
Ô
226
_
242
ô
147
ú
163
179
195
Ë
211
Ò
227
3/4
243
ö
148
ñ
164
180
196
È
212
õ
228
¶
244
Code Chara
160
176
192
ò
149
Ñ
165
Á
181
197
⁄
213
Õ
229
§
245
û
150
ª
166
Â
182
ã
198
Í
214
µ
230
÷
246
ù
151
º
167
À
183
Ã
199
Î
215
231
¸
247
ÿ
152
¿
168
©
184
200
Ï
216
232
˚
248
Ö
169
185
201
153
®
Ü
154
¬
170
186
ø
155
1/2
171
187
172
217
Ú
233
¨
249
202
218
Û
234
•
250
203
219
Ù
y´
235
1
251
236
3
252
´
Y
_
237
2
253
£
156
1/4
188
204
Ø
157
¡
173
¢
189
205
|
221
×
158
«
174
¥
190
206
Ì
222
ƒ
159
»
175
ı
191
¤
207
: for R/J printer only.
The “Ä”, “Ö”, “Ü” characters are displayed as “A”, “O”, “U”.
E
54
Chara Code
220
223
238
'
239
254
Double
size
255
Department key feature programming
There are two different methods you can use to assign features to department keys.
With “Batch feature programming”, you can use a single operation to assign multiple features.
“Individual feature programming”, on the other hand, let you assign features one-by-one.
This method is recommended for programming of special features to individual department keys.
Batch feature programming
When using this procedure to assign multiple features to departments, use 9-digit codes that you create using the
following procedure
To other department key
63s6 : : : : : ; ; : :
D9
D8
D7
D6 D5
D4
D3 D2
D1
Mode Switch
Negative department
a
No = 0
Yes = 2
Hash department
b
No = 0
Yes = 4
Taxable status 1
a
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
Taxable status 3
c
No = 0
Yes = 4
No = 0
Yes = 4
Always “00”
Significant
numbers
:D
:D
:D
Significant
number
High digit limit specification
Group link (00 ~ 50)
a+b =
No = 0
Yes = 1
Single item sale
Taxable status 4
{ }
a+b+c =
:D
Convenient Operations and Setups
PGM
& (Dept.1)
6 ' (Dept.2) 6 s
:
. (Dept.24)
9
8
7
6
:D
; ;DD
: :D D
5
4
3
2
1
55
E
Convenient Operations and Setups
Individual feature programming
With this procedure, you can assign individual features to specific departments. Please select the command code of
the contents you want to program, and follow the procedure below.
To other department key
Different program to
the next department key
PGM
63s 6 Command code s 6
{ }
& (Dept.1)
' (Dept.2)
6 Program code 6
6s
:
. (Dept.24)
Mode Switch
Command
code
Negative department
a
No = 0
Yes = 2
Hash department
b
No = 0
Yes = 4
1866
Single item sale
1566
High digit limit specification
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
Taxable status 3
c
No = 0
Yes = 4
Taxable status 4
1166
Group link (00 ~ 50)
56
No = 0
Yes = 4
Significant
numbers
:
:
:
Significant
number
a
0966
a+b =
No = 0
Yes = 1
Taxable status 1
To program a unit price to a department key, please refer the page 26.
E
Program
code
Contents/selection
0166
0366
Same program to the
next department key
a+b+c =
:
:
::
PLU feature programming
There are two different methods you can use to assign features to PLUs.
With “Batch feature programming”, you can use a single operation to assign multiple features.
“Individual feature programming”, on the other hand, let you assign features one-by-one.
This method is recommended for programming of special features to individual PLUs.
Batch feature programming
When using this procedure to assign multiple features to PLUs, use 9-digit codes that you create using the
following procedure.
To a new (not sequential) PLU
Different program to the next PLU
6 3s 6 PLU No. + 6
Mode Switch
(1 ~ 1200)
6:::::::;; 6 a 6s
D9
D8
D7
D6 D5
D4
D3 D2
Negative PLU
a
No = 0
Yes = 2
Hash PLU
b
No = 0
Yes = 4
Single item sale
a
No = 0
Yes = 1
Treat as subdepartment/PLU.
b
PLU = 0
Subdept. = 4
Taxable status 1
a
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
Taxable status 3
c
No = 0
Yes = 4
Department link (00 ~ 24)
Always “00”
a+b =
:D
a+b =
:D
No = 0
Yes = 4
Significant
numbers
9
8
:D
Significant
number
High digit limit specification (for subdepartment)
Taxable status 4
D1
Convenient Operations and Setups
PGM
7
a+b+c =
:D
6
:D
::D D
;;D D
5
4
3
2
1
57
E
Convenient Operations and Setups
Individual feature programming
With this procedure, you can assign individual features to specific PLUs. Please select the command code of the
contents you want to program, and follow the procedure below.
To a new (not sequential) PLU
PGM
63s 6 Command code s 6
Different program
to the next PLU
Same program
to the next PLU
Mode Switch
6
Command
code
PLU No. +
(1 ~ 1200)
Negative PLU
a
No = 0
Yes = 2
Hash PLU
b
No = 0
Yes = 4
Single item sale
a
No = 0
Yes = 1
Treat as subdepartment (If “No”, treat as PLU.)
b
No = 0
Yes = 4
1866
0366
Program
code
Contents/selection
0166
1566
6 Program code 6 a 6 s
Taxable status 1
a
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
Taxable status 3
c
No = 0
Yes = 4
Taxable status 4
1166
Department link (00 ~ 24)
No = 0
Yes = 4
Significant
numbers
To program a unit price to a PLU or a subdepartment, please refer to the page 28.
E
58
:
a+b =
:
:
Significant
number
High digit limit specification
0966
a+b =
a+b+c =
:
:
: :;;
Registering example
REG
Mode Switch
Locking out and releasing high digit limitation
The o key should be assigned as “OPEN”.
OPERATION
Unit price
Quantity
Item
Dept.
Max. digit
Payment
Cash
( ): Preset value
$10.50
1
3
(3)
$11.00
RECEIPT
1050(
ERROR ALARM
(Exceeding max. digits)
C
o
REG
15-03-2002 12:40
000030
DEPT03
TOTAL
CASH
CHANGE
•10.50
•10.50
•11.00
•0.50
Cancels limitations
for next entry
Single item sales items
You can issue a receipt by simply touching the single item sales department or PLU. The following examples show how
you register single-item-sale departments. Registration of single item sale PLUs is identical.
Single item
OPERATION
Unit price
$2.00
Quantity
1
Item
Dept.
4
Sales status (Single item)
( ): Preset value
2-)
RECEIPT
REG 15-03-2002 12:45
CLERK 01
000031
DEPT04
CASH
•2.00
•2.00
59
Convenient Operations and Setups
1050(
s
11-a
E
Convenient Operations and Setups
Multiple item sale
OPERATION
Unit price
$2.00
Quantity
1
Item 1
Dept.
3
Sales status (Normal)
Unit price
$5.00
Quantity
1
Item 2
Dept.
4
Sales status (Single item)
Payment
Cash
$7.00
( ): Preset value
RECEIPT
2-(
5-)
Single item status is not
effective during transaction.
REG 15-03-2002 12:50
CLERK 01
000032
DEPT03
DEPT04
CASH
•2.00
•5.00
•7.00
a
It is necessary to press the
finalize key.
Note: The single item sales department or PLU should be registered at the top of the transaction, otherwise the
transaction is not finalized. It is necessary to press a, h or k key.
Examples of registering subdepartments
Single item sale
OPERATION
Unit price
Item
Quantity
Subdept.
Payment
Cash
$6.00
1
15
$10.00
15+
PLU (subdepartment) code
6-:
Unit price
RECEIPT
REG 15-03-2002 12:55
CLERK 01
000033
PLU0015
TOTAL
CASH
CHANGE
•6.00
•6.00
•10.00
•4.00
s
10-a
Repeat
OPERATION
Unit price
Item 1 Quantity
Subdept.
Unit price
Item 2 Quantity
Subdept.
Payment
Cash
( ): Preset value
E
60
($3.00)
3
15
$2.00
2
15
$20.00
15+
:
Hit : without a unit price
recalls preset price.
:
:
15+
2-:
:
s
20-a
RECEIPT
REG 15-03-2002 13:00
CLERK 01
000034
PLU0015
PLU0015
PLU0015
PLU0015
PLU0015
TOTAL
CASH
CHANGE
•3.00
•3.00
•3.00
•2.00
•2.00
•13.00
•20.00
•7.00
Multiplication
OPERATION
Unit price
Quantity
Subdept.
Payment
Cash
Item
$6.00
1.25
15
$10.00
1^25X
Quantity
(4-digit integer/2-digit decimal)
15+
6-:
s
10-a
RECEIPT
REG 15-03-2002 13:05
CLERK 01
000035
1.25
PLU0015
TOTAL
CASH
CHANGE
X
@6.00
•7.50
•7.50
•10.00
•2.50
Printing VAT breakdowns
The following example shows how to get VAT breakdown.
Anytime you press the v key in a transaction, VAT breakdown is automatically
printed out at the end of the transaction.
REG
OPERATION
Unit price
Quantity
Item
Dept.
Taxable
Payment
Cash
( ): Preset value
$10.00
1
1
(1)
$10.00
10-&
s
v
10-a
Convenient Operations and Setups
Mode Switch
RECEIPT
REG 15-03-2002 13:40
CLERK 01
000039
DEPT01
TAX-AMT 1
TAX 1
TOTAL
CASH
CHANGE
T1
•10.00
•9.62
•0.38
•10.00
•10.00
•0.00
• Every receipt needs VAT breakdown lines, select the finalize (a, h, k) key status to “print VAT breakdown”. Refer to page 67.
61
E
Convenient Operations and Setups
Percent key feature programming
In this section, detail information of p is described.
Programming to the percent key
To program a percent rate, please refer to the page 30.
PGM
6 3s 6 : : ; : : ; ; 6 p 6 s
D7
D6
D5
D4 D3
D2
D1
Mode Switch
:D
Significant
number
Fraction control, round off = 0, cut off = 1, round up = 2
Key attribution
a
%– = 0
%+ = 1
Prohibit manual entry to override programmed percentage.
b
No = 0
Yes = 2
7
a+b =
:D
6
;D
Always “0”
5
Taxable status 1
a
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
Taxable status 3
Taxable status 4
Always “00”
c
a+b+c =
:D
4
No = 0
Yes = 4
No = 0
Yes = 4
:D
;;DD
3
2
E
62
1
Registering discounts and premiums
REG
Mode Switch
Discount for Items and subtotals
Refer to “Registering discounts” in “Basic Operations and Setups” on page 31.
Premium for Items and subtotals
First of all, change key attribution to “premium” and change the key descriptor also.
OPERATION
)
7p
Applies the input value as a
premium rate (7%).
32+
s
p
Applies the preset premium
rate (5%) to the subtotal.
REG 15-03-2002 13:15
CLERK 01
000037
DEPT04
7%
%+
PLU0032
ST
5%
%+
TOTAL
CASH
CHANGE
•10.00
•0.70
•5.00
•15.70
•0.79
•16.49
•20.00
•3.51
s
20-a
• You can manually input rates up to 4 digits long (0.01% to 99.99%).
Taxable status of the p key
• Whenever you perform a discount/premium operation on the last item registered, the tax calculation for discount/premium amount is performed in accordance with the tax status programmed for that item.
• Whenever you perform a discount/premium operation on a subtotal amount, the tax calculation for the subtotal
amount is performed in accordance with the tax status programmed for the p key.
63
Convenient Operations and Setups
Unit price ($10.00)
Item 1 Quantity
1
Dept.
4
Premium
Rate
7%
Unit price ($5.00)
Item 2 Quantity
1
PLU
32
Subtotal
Premium
Rate
(5%)
Payment
Cash
$20.00
( ): Preset value
RECEIPT
E
Convenient Operations and Setups
Currency exchange programming
When the ; key is pressed, a current subtotal including tax is converted directly into foreign currency and the
result is displayed, and the subsequent finalization is handled using the foreign currency. The currency exchange
function is released by finalizing a transaction, partial tender operation, receipt issuance, or by pressing the s
key.
Currency exchange rate programming
PGM
61s 6 : : : : : : : : 6 ; 6 s
Integer
(Max. 4-digit)
Mode Switch
Decimal
(Max. 4-digit)
Preset rate
Example:
$1.00 = ¥110.50
¥100 = $0.9050
2
2
1^105
0^905
Currency exchange feature programming
PGM
63s 6 : ; ; : ; : : 6 ; 6 s
D7
D6
D5
D4
D3
D2
D1
Mode Switch
Fraction control, round off = 0, cut off = 1, round up = 2
:D
;;D D
Significant
number
7
Always “00”
6
Monetary symbol for foreign currency;
Local currency symbol = 0
Monetary symbol 1 (in the special character program) = 1
Monetary symbol 2 (in the special character program) = 2
Significant
number
:D
Significant
number
;D
:D
4
Always “0”
3
Digit separator for foreign currency;
Period = 0, Comma = 2
Monetary system code (decimal places) following currency
exchange operation;
Same as local currency = 0, º0 = 1, º00 = 2, 0 = 3
E
64
Significant
number
2
]
:D
1
5
Registering foreign currency
REG
Mode Switch
1) Full amount tender in foreign currency
* Preprogrammed exchange rate: ¥ 1 = $0.0090
Important!
Tenders in a foreign currency can be registered using the a and k keys only. Other finalize
keys cannot be used.
DISPLAY
10-& 5
20-' 5
;5
50-; 5
a5
Enter the unit price and press the
applicable department key.
Enter the next unit price and press
the applicable department key.
Press the ; key without entering a numeric value. This operation converts the subtotal (including tax) dollar value into yen by
applying a preprogrammed exchange rate. The result is shown
on the display but not printed on
the receipt or journal.
Enter the amount tendered in yen
and press the ; key. This operation converts the entered yen
amount into dollars by applying a
preprogrammed exchange rate.
The result is shown on the display.
Press to finalize the transaction.
Note that you do not need to reenter the dollar amount.
The register automatically calculates the change amount due in
dollars and shows it on the display,
receipts and journal.
1º00
(Displays in $)
2º00
(Displays in $)
£333
RECEIPT
REG 15-03-2002 13:20
CLERK 01
000038
DEPT01
DEPT02
TOTAL
CURR EXG
CASH
CASH
CHANGE
•10.00
•20.00
•30.00
¥5,000
•45.00
•15.00
(Displays in ¥: 3,333)
Convenient Operations and Setups
OPERATION
4%00
(Displays in $: 45.00)
1%00
(Displays in $)
65
E
Convenient Operations and Setups
2) Partial tender in a foreign currency
* Preprogrammed exchange rate: ¥ 1 = $0.0090
Important!
Partial tender in a foreign currency can be registered using the a key and k keys only.
Other finalization keys cannot be used, but the remaining tender can be finalized using any
finalize key.
OPERATION
10-&
20-'
;
20-;
a
k
DISPLAY
5 Enter the unit price and press the
applicable department key.
5 Enter the next unit price and press
the applicable department key.
5 Press the ; key without entering a numeric value. This operation converts the subtotal (including tax) dollar value into yen
by applying a preprogrammed
exchange rate. The result is
shown on the display but not
printed on the receipt or journal.
5 Enter the partial amount tendered
in yen and press the ; key.
This operation converts the entered yen amount into dollars by
applying a preprogrammed exchange rate. The result is shown
on the display.
5 Press the a key to specify
cash tender for the yen partial
tender. Note that you do not need
to re-enter the dollar amount.
The register automatically deducts the dollar equivalent of the
yen amount tendered from the
total amount due and shows the
amount on the display.
5 Press to finalize the transaction.
1º00
(Displays in $)
2º00
(Displays in $)
£333
(Displays in ¥: 3,333)
1•00
(Displays in $: 18.00)
1™00
(Displays in $)
1™00
(Displays in $)
E
66
RECEIPT
REG 15-03-2002 13:25
CLERK 01
000039
DEPT01
DEPT02
TOTAL
CURR EXG
CASH
CASH
CHECK
•10.00
•20.00
•30.00
¥2,000
•18.00
•12.00
Other function key feature programming
You can define a selection of features for the function keys by specifying an 8-digit program code for each key.
To other function key
PGM
63s 6 : ; : : : : : : 6
D8
D7
D6
D5 D4
D3
D2
6s
Function key
D1
Mode Switch
Cash, Charge, Check key
Restrict (to 0, 5) on the last digit for amount tendered (except a)
(only for Australia)
:D
;D
No = 0
Yes = 1
8
Always “0”
High amount limit specification for subtotal and tendering amounts *1
Number of
zeros (0 ~ 9)
Prohibit entry of a partial payment
a
No = 0
Yes = 1
Prohibit the entry of the amount tendered.
b
No = 0
Yes = 2
Force entry of the amount tendered.
c
No = 0
Yes = 4
Print VAT breakdown.
a
No = 0
Yes = 1
Restriction (to 00, 25, 50, 75) on last two digits for amount tendered *2
b
No = 0
Yes = 4
High amount limit specification for change amount due.
*1
Maximum
value (0 ~ 9)
Number of
zeros (0 ~ 9)
Convenient Operations and Setups
7
Maximum
value (0 ~ 9)
::D D
6
a+b+c =
:D
a+b =
:D
5
4
3
::D D
2
1
*1
High amounts limits:
High amount limitations are specified as 2-digits. The first digit you specify limits the maximum value of the
leftmost digit of the value within the range of 0 through 9. The second digit you specify indicates the number of
zeros in the limit value, again within the range of 0 through 9.
Example: $600.00 maximum 2 Enter 64.
Entering “00” clears the limitation.
*2
Always program “Restrict = 4” here for cash amount tendered key when you are using Danish rounding.
67
E
Convenient Operations and Setups
Received on account, Paidout key
;;D D
Always “00”
8
Maximum
value (0 ~ 9)
High amount limit specification for change amount due.
(refer to *1 on the previous page.)
Number of
zeros (0 ~ 9)
7
::D D
6
5
; ~ ; D ~D
Always “0000”
4
1
Minus key
Always “00”
; ;D D
:D
:D
8
No = 0
Yes = 1
Allow credit balance.
Significant
number
High digit limit specification
Taxable status 1
a
No = 0
Yes = 1
Taxable status 2
b
No = 0
Yes = 2
c
No = 0
Yes = 4
Taxable status 3
Taxable status 4
No = 0
Yes = 4
Always “00”
7
6
5
a+b+c =
:D
4
:D
; ;DD
3
2
1
#/No sale key
Always “00”
;;D D
:D
; ~ ; D ~D
8
Treat as the first transaction.
Always “00000”
No = 0
Yes = 1
6
5
E
68
7
1
Calculator functions
CAL
While registering at the REG mode, you can switch to CAL mode and then return
to REG mode to resume the registration.
Mode Switch
Example 1 (Calculation examples)
OPERATION
DISPLAY
Clear
CC
0
5+3-2=
5&3'2a
§
(23-56)×78=
23'56(78a
-257¢
12 % on 1500
1500'(12p
18º
Example 2 (Memory recall)
Unit price $10.00
Quantity
1
Dept.
1
Unit price $20.00
Item 2 Quantity
1
Dept.
2
Payment
Cash
$10.00
by 3 persons each,
Item 1
DISPLAY/RECEIPT
Turn to REG
10-&
20-'
s
REG 15-03-2002 13:35
CLERK 01
000041
DEPT01
DEPT02
•10.00
•20.00
Convenient Operations and Setups
OPERATION
Turn to CAL
[
3º
Memory recall:
Recalls subtotal amount
)3a
1º
Divides the subtotal by 3
persons
Turn to REG
[
Memory recall:
Recalls the result amount
a
[a
[a
TOTAL
CASH
CASH
CASH
CHANGE
•30.00
•10.00
•10.00
•10.00
•0.00
69
E
Convenient Operations and Setups
Programming calculator mode control
Open drawer when a (equal) is pressed in CAL mode.
a
No = 0
Yes = 1
Open drawer when B is pressed in CAL mode.
b
No = 0
Yes = 2
c
Yes = 0
No = 4
Print calculator total on the daily report.
a+b+c =
:D
5
;~;D~D
Always “0000”
4
1
6 3s 6 1022s 6
PGM
Mode Switch
6:;;;; a 6s
D5
D4
D3
D2 D1
About the daylight saving time
It is possible to set the internal clock forward/backward
by 1 ~ 9 hour(s) for the daylight saving time.
REG
Mode Switch
OPERATION
• Forward by 1 hour
• Backward by 1 hour
* Put 2 ~ 9, in case of set the clock by 2 ~ 9 hours.
E
70
DISPLAY
X
*
1
X
C
12-3$
X
m
*
1
X
C
12-3$
12-3$
13-3$
(Blinking)
Set forward by 1 hour.
~00
12-3$
(Blinking)
12-3$
(Blinking)
11-3$
~00
Set backward by 1 hour.
Printing read/reset reports
• Read report
You can print read reports at any time during the business day without affecting the data stored in the cash
register's memory.
• Reset report
You should print reset reports at the end of the business day.
Important!
• The reset operation issues a report and also clears all sales data from the cash register's memory.
• Be sure to perform the reset operations at the end of each business day. Otherwise, you will not
be able to distinguish between the sales data for different dates.
To print the individual department, PLU/subdepartment read report
This report shows sales for specific departments or PLU/subdepartments.
X mode
Mode Switch
8
• Specifying a department
&, ', (, ), ~ .
REPORT
— Read mode/date/time
X
15-03-2002 17:05
CLERK 01
000250— Clerk/consecutive No.
X
— Read symbol
DEPT01
QT
15—
29.6%
•339.50—
DEPT02
QT
19
5.46%
•62.70
PLU0001
QT
31—
12.12%
•139.10—
PLU0002
QT
23
29%
•332.67
-----------------------TOTAL
QT
88—
76.1%
•873.97—
Department descriptor/No. of items
Sales ratio/department amount
PLU descriptor/No. of items
Sales ratio/PLU amount
Total No. of items
Total amount
• Specifying a PLU
1~12- +
8
s
Convenient Operations and Setups
OPERATION
After you finish to select departments, PLU/subdepartments, press s to terminate.
71
E
Convenient Operations and Setups
To print the financial read report
This report shows gross sales, net sales, cash in drawer and check in drawer.
OPERATION
X mode
REPORT
— Read mode/date/time
X
15-03-2002 17:10
CLERK 01
000251— Clerk/consecutive No.
FLASH
Mode Switch
8
GROSS TOTAL
NET TOTAL
Money declaration *1
CASH-INDW
(Cash in drawer amount B)
#
8
X
— Report title/read symbol
QT
1216—
•21954.50—
No
523—
•27733.12—
•27289.10—
CHARGE-INDW
CHECK-INDW
•27270.00—
•19.10—
•398.00—
•332.67—
Gross No. of items
Gross amount
Net No. of customers
Net amount
Cash in drawer (b)
Declared amount (a)
Difference (b) - (a)
Charge in drawer
Check in drawer
X
*1
Money declaration:
Count how much cash is in the drawer and input this amount (up to 8-digits).
The cash register will automatically compare the input with the cash in drawer in the memory and print the
difference between these two amounts.
Note that if money declaration is required by programming (page 45), you cannot skip this procedure.
To print the group read report
This report shows group totals.
OPERATION
X mode
Mode Switch
8
6a
REPORT
— Read mode/date/time
X
15-03-2002 17:15
CLERK 01
000252— Clerk/consecutive No.
— Report code/report title/read
symbol
01•••••••• QT
16— Group 01/No. of items
0.24%
•54.50— Sales ratio/group 01 amount
02•••••••• QT
25
0.09%
•21.33
03•••••••• QT
132
0.12%
•90.78
•••••••••••• QT
6 Total of non-group link
0.02%
•4.50— departments
-----------------------TOTAL
QT
156— Total No. of items
0.47%
•332.67— Total amount
0006 GROUP
X
Issue this report before the daily sales reset report, otherwise the group totals are all reset.
E
72
To print the PLU/subdepartment read/reset report
This report shows sales for PLUs/subdepartments.
OPERATION
Reset:
X mode
Z mode
Mode Switch
8
1a
— Reset mode/date/time
Z
15-03-2002 17:25
CLERK 01
000254— Clerk/consecutive No.
Z 0001— Report code/report title/reset
symbol/reset counter
PLU0001
QT
16— PLU001/No. of items
0.24%
•54.50— Sales ratio/PLU001 amount
PLU0002
QT
25
0.09%
•21.33
PLU0003
QT
132
0.12%
•90.78
PLU0400
QT
6
0.02%
•4.50
-----------------------TOTAL
QT
156— Total No. of items
100%
•21960.90— Total amount
0001 PLU
Convenient Operations and Setups
Read:
REPORT
To print the hourly sales read/reset report
This report shows hourly breakdowns of sales.
OPERATION
Read:
Reset:
X mode
Z mode
Mode Switch
8
2a
REPORT
— Reset mode/date/time
Z
15-03-2002 17:30
CLERK 01
000255— Clerk/consecutive No.
0002 HOURLY Z 0001— Report code/report title/reset
symbol/reset counter
00:00-01:00
No
6— Time range/No. of customers
•4.50— Sales amount
01:00-02:00
No
25
•21.33
02:00-03:00
No
132
•90.78
23:00-24:00
No
1
•1.50
-----------------------TOTAL
No
56— Total No. of customers
•1338.40— Total amount
73
E
Convenient Operations and Setups
To print the monthly sales read/reset report
This report shows monthly breakdowns of sales.
OPERATION
Read:
Reset:
REPORT
Z
15-03-2002 17:35
— Reset mode/date/time
CLERK 01
000256— Clerk/consecutive No.
X mode
Z mode
0003 MONTHLY
Z 0001— Report code/report title/reset
symbol/reset counter
1••••
No
6— Date of a month/No. of customers
•4.50— Sales amount
2••••
No
25
•21.33
3••••
No
132
•90.78
31••••
No
1
•1.50
-----------------------TOTAL
No
56— Total No. of customers
•1338.40— Total amount
Mode Switch
8
3a
To print the electronic journal memory read/reset report
Even if the printer is used for issuing receipts, you can get transaction logs by this report.
OPERATION
REPORT
Read:
Reset:
X mode
Z mode
— Read mode/date/time
X
15-03-2002 17:35
CLERK 01
000257 — Clerk/consecutive No.
0058 E-JOURNAL
Mode Switch
8
8
58a
58a
8
::::::
REG 15-03-2002
CLERK 01
DEPT02
TAX-AMT 1
TAX 1
CASH
2 No
REG 15-03-2002
CLERK 01
DEPT01
DEPT02
5 X
DEPT03
(Memory reset)
Z mode only
(report start date; YYMMDD))
If skipped, start with the first record.
8
X
— Report code/report title
/read symbol
12:33
000122
•2.00
•3.00
•0.15
•3.15 — Journal images
12:35
000124
•1.00
•2.00
@1.00
•5.00
a
8
::::::
• Electronic journal memory near-end and memory full:
(report start consecutive No.)
If skipped, start with the first record.
AMOUNT
~00
8
a
Electronic journal memory
near end memory full symbol
RPT RECEIPT
ON
Important!
• When the register shows the above sign, issue this read report (if necessary) and reset this
memory immediately. (If you do not need this report, enter “4058” instead of “58”.)
• Issue this report before the daily sales reset report, otherwise you cannot get this report.
E
74
To print the daily sales read/reset report
This report shows sales except for PLUs.
OPERATION
Reset:
X mode
Z mode
Mode Switch
8
Money declaration *1
(Cash in drawer amount B)
8
a
— Reset mode/date/time
Z
15-03-2002 17:20
CLERK 01
000258— Clerk/consecutive No.
Z 0001— Report code/report title/reset symbol/
reset counter *5
DEPT01
QT
1015— Department descriptor/No. of items *2
47.07%
•10339.50— Sales ratio/department amount *2
DEPT02
QT
19
31.87%
•7000.70
DEPT03
QT
31
18.84%
•4139.10
DEPT04
QT
23
1.51%
•332.67
NON-LINK DPT QT
10— Non-link department No. of items
0.43%
•94.90— Non-link department amount
-----------------------GROSS TOTAL
QT
1253— Gross No. of items
•21960.90— Gross sales amount
NET TOTAL
No
545— No. of customers
•30217.63— Net sales amount
CASH-INDW
•29903.06— Cash in drawer amount (b)
0000 DAILY
#
CHARGE-INDW
CHECK-INDW
CE-CASH 1
CE-CHECK 1
TAX-AMT 1
*1
*2
*3
*4
*5
•29903.06—
•0.00—
•183.60—
•197.17—
¥7,000—
¥4,000—
•732.56—
Declared amount (a)
Difference (b) - (a)
Charge in drawer amount
Check in drawer amount
Foreign currency cash in drawer
Foreign currency check in drawer
Taxable amount 1 *3
TAX 1
TAX-AMT 2
TAX 2
TAX-AMT 3
TAX 3
TAX-AMT 4
TAX 4
TAX
ROUNDING AMT
CANCEL TTL
•43.96—
•409.72—
•21.55—
•272.50—
•8.18—
•5.50—
•0.06—
•73.75—
•4.75—
No
2—
•108.52—
RF-MODE TTL
No
2—
•3.74—
CALCULATOR
No
10—
-----------------------CASH
No
81—
•836.86—
CHARGE
No
10—
•197.17—
CHECK
No
9—
•183.60—
RC
No
2—
•78.00—
PD
No
1—
•6.80—
No
8—
•3.00—
%
No
10—
•4.62—
REFUND
No
7—
•27.79—
ERR CORR
No
10—
•12.76—
#/NS
No
5—
-----------------------CLERK 01
No
12—
•127.63—
********
—
CLERK 02
No
6
•27.63
********
—
CLERK 03
No
24
Tax amount 1 *3
Taxable amount 2 *3
Tax amount 2 *3
Taxable amount 3 *3
Tax amount 3 *3
Taxable amount 4 *3
Tax amount 4 *3
Tax total *4
Rounding amount (Australia only)
Cancellation count
Cancellation amount
Refund mode operation count *4
Refund mode operation amount *4
CAL mode operation count
Cash sales count
Cash sales amount
Charge sales count
Charge sales amount
Check sales count
Check sales amount
Received on Account count
Received on Account amount
Paid out count
Paid out amount
Subtraction count
Subtraction amount
Discount/premium count
Discount/premium amount
Refund key count *4
Refund key amount *4
Error correction count
Error correction amount
No sale count
Clerk 1/clerk 1 sales count
Clerk 1 sales amount
Training clerk
-----------------------GRND TTL •0000351217.63— Non-resettable grand-sales total *4
000001---»000253— Consecutive No. range of the day *4
Money declaration:
Count how much cash is in the drawer and input this amount (up to 8-digits).
The cash register will automatically compare the input with the cash in drawer in the memory and print the
difference between these two amounts.
Note that if money declaration is required by programming (page 45), you cannot skip this procedure.
Zero totalled departments (the amount and item numbers are both zero) are not printed.
Taxable amount and tax amount are printed only if the corresponding tax table is programmed.
These items can be skipped by programming.
The “*” symbol is printed on the reset report, if memory overflow occurred in the totalizer.
75
Convenient Operations and Setups
Read:
REPORT
E
Convenient Operations and Setups
To print the periodic-1/-2 sales read/reset reports
These reports show sales breakdowns of sales by any two kinds of period you want.
OPERATION
Read:
Reset:
REPORT
X mode
Z mode
Mode Switch
8
100 (Periodic-1 Read)
300 (Periodic-2 Read)
200 (Periodic-1 Reset)
400 (Periodic-2 Reset)
8
a
— Reset mode/date/time
Z
15-03-2002 17:40
CLERK 01
000257— Clerk/consecutive No.
ZZ0001— Report code/report title/reset symbol/
reset counter
DEPT01
QT
1015— Department descriptor/No. of items *1
47.07%
•10339.50— Sales ratio/department amount *1
DEPT02
QT
19
31.87%
•7000.70
DEPT03
QT
31
18.84%
•4139.10
DEPT04
QT
23
1.51%
•332.67
NON-LINK DPT QT
10— Non-link department No. of items
0.43%
•94.90— Non-link department amount
-----------------------GROSS TOTAL
QT
1253— Gross No. of items
•21960.90— Gross sales amount
NET TOTAL
No
545— No. of customers
•30217.63— Net sales amount
CASH-INDW
•29903.06— Cash in drawer amount
CHARGE-INDW
•183.60— Charge in drawer amount
CHECK-INDW
•197.17— Check in drawer amount
TAX-AMT 1
•732.56— Taxable amount 1 *2
TAX 1
•43.96— Tax amount 1 *2
TAX-AMT 2
•409.72— Taxable amount 2 *2
TAX 2
•21.55— Tax amount 2 *2
TAX-AMT 3
•272.50— Taxable amount 3 *2
TAX 3
•8.18— Tax amount 3 *2
TAX-AMT 4
•5.50— Taxable amount 4 *2
TAX 4
•0.06— Tax amount 4 *2
TAX
•73.75— Tax total *3
ROUNDING AMT
•4.75— Rounding amount (Australia only)
CANCEL TTL
No
2— Cancellation count
•108.52— Cancellation amount
0200 PERIODIC-1
*1
*2
*3
E
76
RF-MODE TTL
No
2—
•3.74—
CALCULATOR
No
10—
-----------------------CASH
No
81—
•836.86—
CHARGE
No
10—
•197.17—
CHECK
No
9—
•183.60—
RC
No
2—
•78.00—
PD
No
1—
•6.80—
No
8—
•3.00—
%
No
10—
•4.62—
REFUND
No
7—
•27.79—
ERR CORR
No
10—
•12.76—
#/NS
No
5—
-----------------------CLERK 01
No
12—
•127.63—
********
—
CLERK 02
No
6
•27.63
********
—
CLERK 03
No
24
Refund mode operation count *3
Refund mode operation amount *3
CAL mode operation count
Cash sales count
Cash sales amount
Charge sales count
Charge sales amount
Check sales count
Check sales amount
Received on Account count
Received on Account amount
Paid out count
Paid out amount
Subtraction count
Subtraction amount
Discount/premium count
Discount/premium amount
Refund key count *3
Refund key amount *3
Error correction count
Error correction amount
No sale count
Clerk 1/clerk 1 sales count
Clerk 1 sales amount
Training clerk
•217.63
Zero totalled departments (the amount and item numbers are both zero) are not printed.
Taxable amount and tax amount are printed only if the corresponding tax table is programmed.
These items can be skipped by programming.
Reading the cash register's program
To print unit price/rate program (except PLU)
OPERATION
REPORT
PGM mode
— Mode/date/time
PGM1 10-03-2002 09:30
CLERK 01
000010— Clerk/consecutive No.
Mode Switch
8
PGM1••••••••••••••••••••— Program read symbol
DEPT01
T1
@1.00— Dept. descriptor/tax status/unit price *1
DEPT02
@2.00
DEPT23
@0.00
DEPT24
@0.00
1s
%
CURR EXG
8
@0.00— Reduction preset amount
12.34%— Percent rate
105.05— Currency exchange rate
s
*1
Departments without being programmed are not printed on this report.
OPERATION
PGM mode
Mode Switch
8
6s
8
s
*1
REPORT
— Mode/date/time
PGM6 10-03-2002 09:45
CLERK 01
000013— Clerk/consecutive No.
PGM6••••••••••••••••••••— Program read symbol
PLU0001
T1
0001— Item character/tax symbol/PLU No.
0000100000
@1.00— Status program/unit price *1
PLU0002
0002
0000000000
@2.00
PLU0003
0003
0000000000
@3.00
PLU0004
0004
0000000000
@4.00
PLU0005
0005
0000000000
@5.00
PLU0006
0006
0000000000
@6.00
PLU0007
T2
0007
0000200000
@7.00
PLU0008
0008
0000000000
@8.00
PLU0009
0009
0000000000
@9.00
PLU0010
0010
0000000000
@10.00
PLU0499
T2
0499
0000200000
@499.00
PLU0500
0500
0000000000
@500.00
Convenient Operations and Setups
To print the PLU program
PLU without being programmed are not printed on this report.
77
E
Convenient Operations and Setups
To print key descriptor, name, message program (except PLU)
OPERATION
PGM mode
Mode Switch
8
2s
8
s
REPORT
— Mode/date/time
PGM2 10-03-2002 09:35
CLERK 01
000011— Clerk/consecutive No.
PGM2••••••••••••••••••••—
GROSS TOTAL
01—
NET TOTAL
02—
CASH-INDW
03—
CHARGE-INDW
04—
CREDIT-INDW
05
CE-CASH 1
07—
CE-CHECK 1
08—
CE-CHECK 2
09
TAX-AMT 1
11—
TAX 1
12—
TAX-AMT 2
13
TA3
14
19
ROUNDING AMT
22—
CANCEL TTL
23—
RF-MODE TTL
24—
COMMISSION 2
25
CALCULATOR
27
NON-LINK DPT
28—
CASH
01—
CHECK
05—
PD
06—
R ON/OFF
07—
TL
09
CHARGE
10
RC
11—
VAT
12
52
X
55—
REFUND
57
PRICE
62
#/NS
63
CURR EXG
66—
67
%
68
DEPT01
01—
DEPT02
02—
DEPT23
03
DEPT24
24—
CLERK 01
01—
CLERK 02
02—
CLERK 09
03
CLERK 10
10—
GRND TTL
01—
• @NoQT
01—
NoCT
02
X /
03
T1T2T3T4
04
*
05
30
31—
DAILY
01—
PLU
02
HOURLY
03
PERIODIC-1
04
PERIODIC-2
05
OPEN CHECK
11
E-JOURNAL
12—
01—
Program read symbol
Gross character
Net character
Cash in drawer character
Charge in drawer character
Foreign currency cash character
Foreign currency check character
Taxable amount 1 character
Tax 1 character
Rounding character
Cancellation total character
Refund mode total character
Non link department character
Cash key descriptor
Check key descriptor
Paid out key descriptor
Receipt on/off key descriptor
Received on account key descriptor
Multiplication key descriptor
Post receipt/Currency exchange
key descriptor
Department 1 key character
Department 2 key character
Department 24 key character
Clerk 01 character
Clerk 02 character
Clerk 10 character
Grand total character
Special character
Report header
02
ECEIPT Receipt message
19
—
TAXABLE SUPPLY
* INDICA
E
78
To print the print control, compulsory clerk program (except PLU)
OPERATION
REPORT
PGM mode
PGM3••••••••••••••••••••— Program read symbol
0122
00000022— General control
0222
00000000
0422
00000000
0522
00000110
0622
00000004
1822
00001000
2122
00000000
2922
00000000
0125
— Tax table 1
6%
0000
5002
0225
— Tax table 2
5%
0000
5002
0325
— Tax table 3
10%
0000
5003
0425
— Tax table 4
3%
0000
5002
CLERK 01
01— Clerk name
00 0001
— Clerk program
CLERK 02
02
00 0002
CLERK 10
10
00 0010
Mode Switch
8
3s
8
s
DEPT01
0000000000
DEPT02
0000000000
DEPT24
0000000000
CASH
CHECK
PD
CE
%
*1
01— Dept. descriptor/Dept. No.
@1.00— Sales status/unit price *1
02
@2.00
04
@0.00
00002100— Cash key program
00000000— Check key program
00000100
00000000
00000000
00000000
Departments without being programmed are not printed on this report.
79
Convenient Operations and Setups
PGM3 10-03-2002 09:40
— Mode/date/time
CLERK 01
000012— Clerk/consecutive No.
E
Troubleshooting
This section describes what to do when you have problems with operation.
When an error occurs
Errors are indicated by an error tone. When this happens, you can usually find out what the problem is as
shown below.
Does the display show an error code?
No
Yes
4
8
Error code
Meaning
(Message)
E01
Mode switch position changed before
(ERR-MODE) finalization.
E08
Registration without entering a clerk
(SIGN-ON) number.
Return the mode switch to its original
setting and finalize the operation.
4
E10
(PRNT-LID) Platen arm of the printer is opened.
Close the platen arm.
4
E11
Registration is made while the cash
(DRW-OPEN) drawer is opened.
Close the cash drawer.
E12
(JPAP-END) Journal paper end
Replace the new paper roll.
E14
(RPAP-END) Receipt paper end
Replace the new paper roll.
E27
(BUF-FULL) Transaction cancel buffer full.
Finalize the transaction.
4
4
4
4
4
4
4
4
4
4
4
Action
Enter a clerk number.
E31
Finalization of a transaction attempted
Press the s key.
(PRESS-ST) without confirming the subtotal.
E33
Finalize operation attempted without
Enter the amount tendered.
(TEND-AMT) entering amount tender.
E35
(CNG-OVER) Change amount exceeds preset limit. Input amount tendered again.
Read/reset operation without declaring
E38
in drawer. This error appears only Perform money declaration.
(DECL-AMT) cash
when this function is activated.
4
Press C key and check the appropriate section of this manual for the operation you want to perform.
E
80
Troubleshooting
When the register does not operate at all
Perform the following check whenever the cash register enters an error condition as soon as you switch it on.
The results of this check are required by service personnel, so be sure to perform this check before you
contact a CASIO representative for servicing.
Is register plugged in?
Is power on?
Do figures appear on the display?
Yes :
No:
Plug in the power cord.
Troubleshooting
Start
Set the mode switch to any position other than OFF.
Is the electric outlet active?
Use other outlet.
Contact CASIO service
representative
Do the keys function?
Is the mode position correct?
Set to correct position.
Contact CASIO service
representative
Does paper feed?
Is paper loaded correctly?
Load paper.
Contact CASIO service
representative
81
E
Troubleshooting
In case of power failure
If the power supply to the cash register is cut by a power failure or any other reason, simply wait for
power to be restored. The details of any ongoing transaction as well as all sales data in memory are
protected by the memory backup batteries.
• Power failure during a registration
The subtotal for items registered up to the power failure is retained in memory. You will be able to continue
with the registration when power is restored.
• Power failure during printing a read/reset report
The data already printed before the power failure is retained in memory. You will be able to issue a report when
power is restored.
• Power failure during printing of a receipt and the journal
Printing will resume after power is restored. A line that was being printed when the power failure occurred is
printed in full.
• Other
The power failure symbol is printed and any item that was being printed when the power failure occurred is
reprinted in full.
Important!
Once receipt/journal printing or printing of a report starts, it can be stopped only by interruption of
power to the cash register.
When the L sign appears on the display
About the low battery indicator…
The following shows the low battery indicator.
l
~00
If this indicator appears when you switch the cash register on, it can mean one of three things:
• No memory backup batteries are loaded in the cash register.
• The power of the batteries loaded in the unit is below a certain level.
• The batteries loaded in the unit are dead.
To clear this sign, press C key.
Important!
Whenever the low battery indicator appears on the display, load a set of three new batteries as
soon as possible. If there is a power failure or you unplug the cash register when this indicator
appears, you will lose all of your sales data and settings.
BE SURE TO KEEP THE POWER CORD OF THE CASH REGISTER
PLUGGED IN WHENEVER YOU REPLACE THE BATTERIES.
E
82
To replace journal paper
Step 1
CAL
X
REG
Z
OFF
RF
Set the mode switch to the
REG position and remove
the printer cover.
PGM
Step 2
Step 6
Press f to feed about 20
cm of paper.
Slide the printed journal
from the take-up reel.
Step 3
Step 7
Cut the journal paper at the
point where nothing is
printed.
Open the platen arm.
Step 4
Step 8
Remove the journal takeup reel from its holder.
Remove the old paper roll
from the cash register.
Step 5
Step 9
Remove the paper guide
from the take-up reel.
Load new paper.
Troubleshooting/User Maintenance and Options
User Maintenance and Options
Go to the step 3 described
on page 10 of this manual.
83
E
User Maintenance and Options
To replace receipt paper
Step 1
Set the mode switch to the
REG position and remove
the printer cover.
CAL
X
REG
Z
OFF
RF
PGM
Step 2
Open the platen arm.
Step 3
Remove the old paper roll
from the cash register.
Step 4
Load new paper.
Go to the step 3 described
on page 9 of this manual.
NOTE:
After completion of register programming, enter 6200 and s in the PGM 3 mode
(PGM mode ⇒ 3s) to backup the program data into the internal non-volatile memory.
(This opration takes about 10 seconds.)
Options
WT-82 wetproof cover
The optional wetproof cover protects the keyboard from moisture damage.
Consult your CASIO dealer for details.
E
84
Specifications
Display
Printer
Printer:
Journal:
Print speed:
Feed speed:
Paper roll:
Calculations
Chronological data
Date print:
Time print:
Time display:
Alarm
10-key system; Buffer memory 8 keys (2-key roll over)
Full key system
Amount 8 digits (Zero suppression) ; No. of repeats, Receipt On/Off
Character 8 digits; Item descriptor, Key descriptor, Mode
Single sheet dot matrix thermal printer (Receipt or journal printing)
24 digits (Amount 10 digits/descriptor 8, 12 or 24 digits)
Automatic take up roll winding
Max. 14 lines/sec.
Max. 14 lines/sec.
58 mm × 80 mm Ø (Max.)
CASIO P-5880T
User Maintenance and Options/Specifications
Input method
Entry:
Department:
Entry 8 digits; Registration 7 digits; Total 8 digits
Automatic date printout on receipt or journal
Automatic calendar
Automatic time printout on receipt or journal
24-hour system
Entry confirmation signal; Error alarm
Totalizers
Contents
No. of
Totalizers
No. of
customers
(4 digits)
Amount
(10 digits)
No. of items
(4 digits)
24
✔
✔ *1
1200
✔
✔ *1
Hourly sales
24
✔
✔
Monthly
31
✔
✔
Clerk
10
✔
✔
Transaction
Non resettable
grand sales total
Reset counter
31
✔
1
✔ *2
6
✔
Consecutive No.
1
✔
Category
Department
PLU
or
✔
Count
(4 digits)
Periodic
Totalizer
✔
or
✔
or
✔
✔
✔
*1: 4 digit integer + 2 digit decimal, *2: 12 digits
Memory protection
batteries
The effective service life of the memory protection batteries (three new SUM-3 or UM-3 type
batteries) is approximately one year from installation into the machine.
Power supply/
Power consumption
As noted on the plate affixed to right side of register.
Operating temperature
0°C ~ 40°C
Humidity
10 ~ 90%
Dimensions and Weight
269mm (H) × 366mm (W) × 474mm (D)/8kg ................ with small size drawer
291mm (H) × 410mm (W) × 474mm (D)/11kg .............. with medium size drawer
The CE marking below applies to the EU region. Declarer of conformity is as follows:
Casio Electronics Co., Ltd.
Unit 6, 1000 North Circular Road
London NW2 7JD, U.K.
* Specifications and design are subject to change without notice.
85
E
Index
E
A
electronic journal memory 46, 74
equal 21
error code 80
error correct 20, 39
alphabet keys 53
arithmetic operation key 21
Australian rounding 15
auto sign-off 45
F
B
feed key 20
financial report 72
force entry of the amount tendered 67
backspace/character code fixed key 53
bottom message 22
C
CAL mode 18
calculator mode 18, 21, 69
cancel 20, 40
CAPS key 53
cash amount tendered key 21
change preparation 24
character code list 54
character enter key 53
character entering 53
character fixed key 53
character keyboard 53
charge 21, 34
check 21, 34
clear 20, 38
clear/all clear key 21
clerk name 48, 49
clerk number 20, 47
commercial message 22
consecutive No. range 46
consecutive number 22
correction 38
credit balance 69
currency exchange 20, 64
customer display 17, 19
G
grand-sales total 40, 74
group link 56, 58
H
hash department 55, 56, 58
high amount limit 67, 69
high amounts limit 67
high digit limit 55, 56, 58, 69
I
item counter 22
J
journal 22
journal compressed print 44
journal skip 22, 44
K
key descriptor 48, 52
keyboard 17, 20
L
L sign 82
logo message 22
low battery indicator 82
D
daily sales report 41, 75
Danish rounding 15, 67
date setting 12
daylight saving time 70
decimal symbol 44
department 19, 20, 25, 26, 48, 55, 71, 74, 79
department link 56
digit separator symbol 44
discount (percent) 20, 30, 62
display 17, 19
displaying the time 24
displaying the time and date 24
double size letter key 53
drawer 17, 18
drawer key 17
drawer lock 17
drawer open key 21
drawer release lever 18
E
86
M
machine number 46
main display 17, 19
memory recall 21, 69
message 22
minus (reduction) 20, 32
mode key 17
mode switch 17, 18
money declaration 45, 72, 75
multiplication 20, 25, 29
multipurpose tray 17, 18
N
negative department 55, 56, 58
no sale 20, 40
non-add 20, 34
non-resettable grand total 40, 74
Index
O
rounding (special rounding) 15
open 20, 59
operator display 17, 19
operator key 17
S
shift key 53
single item sale 25, 29, 55, 56, 58, 59, 60
skip zero total lines 46
space key 53
special rounding 15
stand-by mode 18
store number (machine number) 46
subdepartment 56, 58, 60
subtotal 21, 25
P
paid out 37
paper feed key 20
paper installation 9
paper loading 9
paper replacement 83, 84
percent 20, 30, 62
periodic report 76
PGM mode 18
PLU 20, 28, 29, 51, 57, 71, 73, 77
pop-up display 17, 19
post receipt 20, 43
power failure 82
preset price 26, 27, 28
price 20, 60
print subtotal 44
print tax rate with tax totalizer 46
print the sales ratio 46
print VAT breakdown 67
printer 17
printer cover 17
printout selection 12
program end key 53
program key 17
program mode 18
program read 77, 78, 79
prohibit cancel operation 45
T
take-up reel 17
tax calculation 27
tax status 26, 28, 30, 32
tax table programming 13, 15
ten key pad 20
time setting 12
time system (12/24Hr) 44
training clerk 47, 74, 77
V
VAT 20, 61
X
X mode 18
X report (read report) 71, 72, 73, 74, 75, 76
Z
Z mode 18
Z report (reset report) 41, 71, 73, 74, 75, 76
R
Index
read mode 18
read report 71, 72, 73, 74, 75, 76
receipt message 50
receipt on/off indicator 19
received on account 21, 37
reduction (minus) 20, 32
refund (return) 35, 36
refund mode 18
REG mode 18
register mode 18
repeat 19, 25, 29, 60
report descriptor 48
report title 48, 49
reset mode 18
reset report 41, 71, 73, 74, 75, 76
reset the consecutive number 45
return 35, 36
RF mode 18
roll paper installation 9
roll paper specification 85
rounding 15
rounding (Australian rounding) 15
rounding (Danish rounding) 15
87
E
MO0202-B
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
Printed in Indonesia
TE-100*E
Printed on recycled paper.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement